PDA

Archiv verlassen und diese Seite im Standarddesign anzeigen : ledctl gibt Fehler zurück



blubbersuelze
04.06.17, 23:52
Hi,

ich würde gerne mit ledctl bei Bedarf eine FestplattenLED leuchten lassen, als Hinweis.
Dafür gibt es ledctl.
Als System nutze ich Debian Jessie.
Nutze ich es jedoch bekomme ich folgende Ausgabe:


[root@server:~]$ ledctl locate=/dev/sda
ledctl: /dev/sda: device not supported
ledctl: IBPI LOCATE: missing block device(s)... pattern ignored.



[root@server:~]$ smartctl -i /dev/sda
smartctl 6.4 2014-10-07 r4002 [x86_64-linux-3.16.0-4-amd64] (local build)
Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family: Western Digital Red (AF)
Device Model: WDC WD20EFRX-68EUZN0
Serial Number: WD-WCC4M1SNJ9V7
LU WWN Device Id: 5 0014ee 2b60d7f29
Firmware Version: 82.00A82
User Capacity: 2.000.398.934.016 bytes [2,00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 5400 rpm
Device is: In smartctl database [for details use: -P show]
ATA Version is: ACS-2 (minor revision not indicated)
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Sun Jun 4 23:49:15 2017 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled


weiß jemand eine Lösung?

mfg.
blubbersuelze :p

just4uk
05.06.17, 00:28
Hm ...... ich meine das ledmon/ledctl nur bei Backplane (SES/SGPIO) LED's funktioniert und dann auch nur bei Raid z.B. md0 usw. ....

Gruß aus L.E.
Uwe