zum einen hast Du ein Problem mit Deiner MySQL-DB:
Feb 24 08:37:10 h2406753 postfix/trivial-rewrite[1149]: warning: connect to mysql server 127.0.0.1: Access denied for user 'vmail'@'localhost' (using password: YES)
... da passt also was nicht.
Zudem scheinst Du ein DNS-Problem zu haben. Ist das ein Server in einem RZ oder bei Dir zu Hause?
Zu dem SASL-Problem findet Google z.B. http://serverfault.com/questions/571191/postfix-fatal-no-sasl-authentication-mechanisms
Ansonsten - Konfigs schaden nie und mehr Infos sowieso.
Danke für die flinke Antwort.
Das ist ein vserver bei einem Hoster, da steht nichts bei mir zuhause...
Dann hier mal die config-Dateien:
/etc/dovecat/conf.d/10-mail.conf
mail_location = maildir:~/mail:LAYOUT=fs
namespace inbox {
inbox = yes
}
mail_uid = vmail
mail_gid = vmail
mail_privileged_group = vmail
##
## Mail processes
##
# Don't use mmap() at all. This is required if you store indexes to shared
# filesystems (NFS or clustered filesystem).
#mmap_disable = no
# Rely on O_EXCL to work when creating dotlock files. NFS supports O_EXCL
# since version 3, so this should be safe to use nowadays by default.
#dotlock_use_excl = yes
# When to use fsync() or fdatasync() calls:
# optimized (default): Whenever necessary to avoid losing important data
# always: Useful with e.g. NFS when write()s are delayed
# never: Never use it (best performance, but crashes can lose data)
#mail_fsync = optimized
# Mail storage exists in NFS. Set this to yes to make Dovecot flush NFS caches
# whenever needed. If you're using only a single mail server this isn't needed.
#mail_nfs_storage = no
# Mail index files also exist in NFS. Setting this to yes requires
# mmap_disable=yes and fsync_disable=no.
#mail_nfs_index = no
# Locking method for index files. Alternatives are fcntl, flock and dotlock.
# Dotlocking uses some tricks which may create more disk I/O than other locking
# methods. NFS users: flock doesn't work, remember to change mmap_disable.
#lock_method = fcntl
# Directory in which LDA/LMTP temporarily stores incoming mails >128 kB.
#mail_temp_dir = /tmp
# Valid UID range for users, defaults to 500 and above. This is mostly
# to make sure that users can't log in as daemons or other system users.
# Note that denying root logins is hardcoded to dovecot binary and can't
# be done even if first_valid_uid is set to 0.
#first_valid_uid = 500
#last_valid_uid = 0
# Valid GID range for users, defaults to non-root/wheel. Users having
# non-valid GID as primary group ID aren't allowed to log in. If user
# belongs to supplementary groups with non-valid GIDs, those groups are
# not set.
#first_valid_gid = 1
#last_valid_gid = 0
# Maximum allowed length for mail keyword name. It's only forced when trying
# to create new keywords.
#mail_max_keyword_length = 50
# ':' separated list of directories under which chrooting is allowed for mail
# processes (ie. /var/mail will allow chrooting to /var/mail/foo/bar too).
# This setting doesn't affect login_chroot, mail_chroot or auth chroot
# settings. If this setting is empty, "/./" in home dirs are ignored.
# WARNING: Never add directories here which local users can modify, that
# may lead to root exploit. Usually this should be done only if you don't
# allow shell access for users. <doc/wiki/Chrooting.txt>
#valid_chroot_dirs =
# Default chroot directory for mail processes. This can be overridden for
# specific users in user database by giving /./ in user's home directory
# (eg. /home/./user chroots into /home). Note that usually there is no real
# need to do chrooting, Dovecot doesn't allow users to access files outside
# their mail directory anyway. If your home directories are prefixed with
# the chroot directory, append "/." to mail_chroot. <doc/wiki/Chrooting.txt>
#mail_chroot =
# UNIX socket path to master authentication server to find users.
# This is used by imap (for shared users) and lda.
#auth_socket_path = /var/run/dovecot/auth-userdb
# Directory where to look up mail plugins.
#mail_plugin_dir = /usr/lib/dovecot/modules
# Space separated list of plugins to load for all services. Plugins specific to
# IMAP, LDA, etc. are added to this list in their own .conf files.
#mail_plugins =
##
## Mailbox handling optimizations
##
# Mailbox list indexes can be used to optimize IMAP STATUS commands. They are
# also required for IMAP NOTIFY extension to be enabled.
#mailbox_list_index = no
# The minimum number of mails in a mailbox before updates are done to cache
# file. This allows optimizing Dovecot's behavior to do less disk writes at
# the cost of more disk reads.
#mail_cache_min_mail_count = 0
# When IDLE command is running, mailbox is checked once in a while to see if
# there are any new mails or other changes. This setting defines the minimum
# time to wait between those checks. Dovecot can also use dnotify, inotify and
# kqueue to find out immediately when changes occur.
#mailbox_idle_check_interval = 30 secs
# Save mails with CR+LF instead of plain LF. This makes sending those mails
# take less CPU, especially with sendfile() syscall with Linux and FreeBSD.
# But it also creates a bit more disk I/O which may just make it slower.
# Also note that if other software reads the mboxes/maildirs, they may handle
# the extra CRs wrong and cause problems.
#mail_save_crlf = no
# Max number of mails to keep open and prefetch to memory. This only works with
# some mailbox formats and/or operating systems.
#mail_prefetch_count = 0
# How often to scan for stale temporary files and delete them (0 = never).
# These should exist only after Dovecot dies in the middle of saving mails.
#mail_temp_scan_interval = 1w
##
## Maildir-specific settings
##
# By default LIST command returns all entries in maildir beginning with a dot.
# Enabling this option makes Dovecot return only entries which are directories.
# This is done by stat()ing each entry, so it causes more disk I/O.
# (For systems setting struct dirent->d_type, this check is free and it's
# done always regardless of this setting)
#maildir_stat_dirs = no
# When copying a message, do it with hard links whenever possible. This makes
# the performance much better, and it's unlikely to have any side effects.
#maildir_copy_with_hardlinks = yes
# Assume Dovecot is the only MUA accessing Maildir: Scan cur/ directory only
# when its mtime changes unexpectedly or when we can't find the mail otherwise.
#maildir_very_dirty_syncs = no
# If enabled, Dovecot doesn't use the S=<size> in the Maildir filenames for
# getting the mail's physical size, except when recalculating Maildir++ quota.
# This can be useful in systems where a lot of the Maildir filenames have a
# broken size. The performance hit for enabling this is very small.
#maildir_broken_filename_sizes = no
##
## mbox-specific settings
##
# Which locking methods to use for locking mbox. There are four available:
# dotlock: Create <mailbox>.lock file. This is the oldest and most NFS-safe
# solution. If you want to use /var/mail/ like directory, the users
# will need write access to that directory.
# dotlock_try: Same as dotlock, but if it fails because of permissions or
# because there isn't enough disk space, just skip it.
# fcntl : Use this if possible. Works with NFS too if lockd is used.
# flock : May not exist in all systems. Doesn't work with NFS.
# lockf : May not exist in all systems. Doesn't work with NFS.
#
# You can use multiple locking methods; if you do the order they're declared
# in is important to avoid deadlocks if other MTAs/MUAs are using multiple
# locking methods as well. Some operating systems don't allow using some of
# them simultaneously.
#
# The Debian value for mbox_write_locks differs from upstream Dovecot. It is
# changed to be compliant with Debian Policy (section 11.6) for NFS safety.
# Dovecot: mbox_write_locks = dotlock fcntl
# Debian: mbox_write_locks = fcntl dotlock
#
#mbox_read_locks = fcntl
#mbox_write_locks = fcntl dotlock
# Maximum time to wait for lock (all of them) before aborting.
#mbox_lock_timeout = 5 mins
# If dotlock exists but the mailbox isn't modified in any way, override the
# lock file after this much time.
#mbox_dotlock_change_timeout = 2 mins
# When mbox changes unexpectedly we have to fully read it to find out what
# changed. If the mbox is large this can take a long time. Since the change
# is usually just a newly appended mail, it'd be faster to simply read the
# new mails. If this setting is enabled, Dovecot does this but still safely
# fallbacks to re-reading the whole mbox file whenever something in mbox isn't
# how it's expected to be. The only real downside to this setting is that if
# some other MUA changes message flags, Dovecot doesn't notice it immediately.
# Note that a full sync is done with SELECT, EXAMINE, EXPUNGE and CHECK
# commands.
#mbox_dirty_syncs = yes
# Like mbox_dirty_syncs, but don't do full syncs even with SELECT, EXAMINE,
# EXPUNGE or CHECK commands. If this is set, mbox_dirty_syncs is ignored.
#mbox_very_dirty_syncs = no
# Delay writing mbox headers until doing a full write sync (EXPUNGE and CHECK
# commands and when closing the mailbox). This is especially useful for POP3
# where clients often delete all mails. The downside is that our changes
# aren't immediately visible to other MUAs.
#mbox_lazy_writes = yes
# If mbox size is smaller than this (e.g. 100k), don't write index files.
# If an index file already exists it's still read, just not updated.
#mbox_min_index_size = 0
# Mail header selection algorithm to use for MD5 POP3 UIDLs when
# pop3_uidl_format=%m. For backwards compatibility we use apop3d inspired
# algorithm, but it fails if the first Received: header isn't unique in all
# mails. An alternative algorithm is "all" that selects all headers.
#mbox_md5 = apop3d
##
## mdbox-specific settings
##
# Maximum dbox file size until it's rotated.
#mdbox_rotate_size = 2M
# Maximum dbox file age until it's rotated. Typically in days. Day begins
# from midnight, so 1d = today, 2d = yesterday, etc. 0 = check disabled.
#mdbox_rotate_interval = 0
# When creating new mdbox files, immediately preallocate their size to
# mdbox_rotate_size. This setting currently works only in Linux with some
# filesystems (ext4, xfs).
#mdbox_preallocate_space = no
##
## Mail attachments
##
# sdbox and mdbox support saving mail attachments to external files, which
# also allows single instance storage for them. Other backends don't support
# this for now.
# Directory root where to store mail attachments. Disabled, if empty.
#mail_attachment_dir =
# Attachments smaller than this aren't saved externally. It's also possible to
# write a plugin to disable saving specific attachments externally.
#mail_attachment_min_size = 128k
# Filesystem backend to use for saving attachments:
# posix : No SiS done by Dovecot (but this might help FS's own deduplication)
# sis posix : SiS with immediate byte-by-byte comparison during saving
# sis-queue posix : SiS with delayed comparison and deduplication
#mail_attachment_fs = sis posix
# Hash format to use in attachment filenames. You can add any text and
# variables: %{md4}, %{md5}, %{sha1}, %{sha256}, %{sha512}, %{size}.
# Variables can be truncated, e.g. %{sha256:80} returns only first 80 bits
#mail_attachment_hash = %{sha1}
mail_home = /var/vmail/%d/%n
/etc/dovecot/dovecot-sql.conf.ext
# This file is commonly accessed via passdb {} or userdb {} section in
# conf.d/auth-sql.conf.ext
# This file is opened as root, so it should be owned by root and mode 0600.
#
# http://wiki2.dovecot.org/AuthDatabase/SQL
#
# For the sql passdb module, you'll need a database with a table that
# contains fields for at least the username and password. If you want to
# use the user@domain syntax, you might want to have a separate domain
# field as well.
#
# If your users all have the same uig/gid, and have predictable home
# directories, you can use the static userdb module to generate the home
# dir based on the username and domain. In this case, you won't need fields
# for home, uid, or gid in the database.
#
# If you prefer to use the sql userdb module, you'll want to add fields
# for home, uid, and gid. Here is an example table:
#
# CREATE TABLE users (
# username VARCHAR(128) NOT NULL,
# domain VARCHAR(128) NOT NULL,
# password VARCHAR(64) NOT NULL,
# home VARCHAR(255) NOT NULL,
# uid INTEGER NOT NULL,
# gid INTEGER NOT NULL,
# active CHAR(1) DEFAULT 'Y' NOT NULL
# );
# Database driver: mysql, pgsql, sqlite
driver = mysql
# Database connection string. This is driver-specific setting.
#
# HA / round-robin load-balancing is supported by giving multiple host
# settings, like: host=sql1.host.org host=sql2.host.org
#
# pgsql:
# For available options, see the PostgreSQL documention for the
# PQconnectdb function of libpq.
# Use maxconns=n (default 5) to change how many connections Dovecot can
# create to pgsql.
#
# mysql:
# Basic options emulate PostgreSQL option names:
# host, port, user, password, dbname
#
# But also adds some new settings:
# client_flags - See MySQL manual
# ssl_ca, ssl_ca_path - Set either one or both to enable SSL
# ssl_cert, ssl_key - For sending client-side certificates to server
# ssl_cipher - Set minimum allowed cipher security (default: HIGH)
# option_file - Read options from the given file instead of
# the default my.cnf location
# option_group - Read options from the given group (default: client)
#
# You can connect to UNIX sockets by using host: host=/var/run/mysql.sock
# Note that currently you can't use spaces in parameters.
#
# sqlite:
# The path to the database file.
#
# Examples:
# connect = host=192.168.1.1 dbname=users
# connect = host=sql.example.com dbname=virtual user=virtual password=blarg
# connect = /etc/dovecot/authdb.sqlite
#
connect = host=127.0.0.1 dbname=vmail user=vmail password=xyz
# Default password scheme.
#
# List of supported schemes is in
# http://wiki2.dovecot.org/Authentication/PasswordSchemes
#
default_pass_scheme = SHA512-CRYPT
# passdb query to retrieve the password. It can return fields:
# password - The user's password. This field must be returned.
# user - user@domain from the database. Needed with case-insensitive lookups.
# username and domain - An alternative way to represent the "user" field.
#
# The "user" field is often necessary with case-insensitive lookups to avoid
# e.g. "name" and "nAme" logins creating two different mail directories. If
# your user and domain names are in separate fields, you can return "username"
# and "domain" fields instead of "user".
#
# The query can also return other fields which have a special meaning, see
# http://wiki2.dovecot.org/PasswordDatabase/ExtraFields
#
# Commonly used available substitutions (see http://wiki2.dovecot.org/Variables
# for full list):
# %u = entire user@domain
# %n = user part of user@domain
# %d = domain part of user@domain
#
# Note that these can be used only as input to SQL query. If the query outputs
# any of these substitutions, they're not touched. Otherwise it would be
# difficult to have eg. usernames containing '%' characters.
#
# Example:
# password_query = SELECT userid AS user, pw AS password \
# FROM users WHERE userid = '%u' AND active = 'Y'
#
password_query = \
SELECT username, domain, password \
FROM users WHERE username = '%n' AND domain = '%d'
# userdb query to retrieve the user information. It can return fields:
# uid - System UID (overrides mail_uid setting)
# gid - System GID (overrides mail_gid setting)
# home - Home directory
# mail - Mail location (overrides mail_location setting)
#
# None of these are strictly required. If you use a single UID and GID, and
# home or mail directory fits to a template string, you could use userdb static
# instead. For a list of all fields that can be returned, see
# http://wiki2.dovecot.org/UserDatabase/ExtraFields
#
# Examples:
# user_query = SELECT home, uid, gid FROM users WHERE userid = '%u'
# user_query = SELECT dir AS home, user AS uid, group AS gid FROM users where userid = '%u'
# user_query = SELECT home, 501 AS uid, 501 AS gid FROM users WHERE userid = '%u'
#
#user_query = \
# SELECT home, uid, gid \
# FROM users WHERE username = '%n' AND domain = '%d'
# If you wish to avoid two SQL lookups (passdb + userdb), you can use
# userdb prefetch instead of userdb sql in dovecot.conf. In that case you'll
# also have to return userdb fields in password_query prefixed with "userdb_"
# string. For example:
#password_query = \
# SELECT userid AS user, password, \
# home AS userdb_home, uid AS userdb_uid, gid AS userdb_gid \
# FROM users WHERE userid = '%u'
# Query to get a list of all usernames.
iterate_query = SELECT username, domain FROM users
/etc/dovecot/conf.d/10-auth.conf
##
## Authentication processes
##
# Disable LOGIN command and all other plaintext authentications unless
# SSL/TLS is used (LOGINDISABLED capability). Note that if the remote IP
# matches the local IP (ie. you're connecting from the same computer), the
# connection is considered secure and plaintext authentication is allowed.
# See also ssl=required setting.
disable_plaintext_auth = yes
# Authentication cache size (e.g. 10M). 0 means it's disabled. Note that
# bsdauth, PAM and vpopmail require cache_key to be set for caching to be used.
#auth_cache_size = 0
# Time to live for cached data. After TTL expires the cached record is no
# longer used, *except* if the main database lookup returns internal failure.
# We also try to handle password changes automatically: If user's previous
# authentication was successful, but this one wasn't, the cache isn't used.
# For now this works only with plaintext authentication.
#auth_cache_ttl = 1 hour
# TTL for negative hits (user not found, password mismatch).
# 0 disables caching them completely.
#auth_cache_negative_ttl = 1 hour
# Space separated list of realms for SASL authentication mechanisms that need
# them. You can leave it empty if you don't want to support multiple realms.
# Many clients simply use the first one listed here, so keep the default realm
# first.
#auth_realms =
# Default realm/domain to use if none was specified. This is used for both
# SASL realms and appending @domain to username in plaintext logins.
#auth_default_realm =
# List of allowed characters in username. If the user-given username contains
# a character not listed in here, the login automatically fails. This is just
# an extra check to make sure user can't exploit any potential quote escaping
# vulnerabilities with SQL/LDAP databases. If you want to allow all characters,
# set this value to empty.
#auth_username_chars = abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWX YZ01234567890.-_@
# Username character translations before it's looked up from databases. The
# value contains series of from -> to characters. For example "#@/@" means
# that '#' and '/' characters are translated to '@'.
#auth_username_translation =
# Username formatting before it's looked up from databases. You can use
# the standard variables here, eg. %Lu would lowercase the username, %n would
# drop away the domain if it was given, or "%n-AT-%d" would change the '@' into
# "-AT-". This translation is done after auth_username_translation changes.
#auth_username_format = %Lu
# If you want to allow master users to log in by specifying the master
# username within the normal username string (ie. not using SASL mechanism's
# support for it), you can specify the separator character here. The format
# is then <username><separator><master username>. UW-IMAP uses "*" as the
# separator, so that could be a good choice.
#auth_master_user_separator =
# Username to use for users logging in with ANONYMOUS SASL mechanism
#auth_anonymous_username = anonymous
# Maximum number of dovecot-auth worker processes. They're used to execute
# blocking passdb and userdb queries (eg. MySQL and PAM). They're
# automatically created and destroyed as needed.
#auth_worker_max_count = 30
# Host name to use in GSSAPI principal names. The default is to use the
# name returned by gethostname(). Use "$ALL" (with quotes) to allow all keytab
# entries.
#auth_gssapi_hostname =
# Kerberos keytab to use for the GSSAPI mechanism. Will use the system
# default (usually /etc/krb5.keytab) if not specified. You may need to change
# the auth service to run as root to be able to read this file.
#auth_krb5_keytab =
# Do NTLM and GSS-SPNEGO authentication using Samba's winbind daemon and
# ntlm_auth helper. <doc/wiki/Authentication/Mechanisms/Winbind.txt>
#auth_use_winbind = no
# Path for Samba's ntlm_auth helper binary.
#auth_winbind_helper_path = /usr/bin/ntlm_auth
# Time to delay before replying to failed authentications.
#auth_failure_delay = 2 secs
# Require a valid SSL client certificate or the authentication fails.
#auth_ssl_require_client_cert = no
# Take the username from client's SSL certificate, using
# X509_NAME_get_text_by_NID() which returns the subject's DN's
# CommonName.
#auth_ssl_username_from_cert = no
# Space separated list of wanted authentication mechanisms:
# plain login digest-md5 cram-md5 ntlm rpa apop anonymous gssapi otp skey
# gss-spnego
# NOTE: See also disable_plaintext_auth setting.
auth_mechanisms = plain login
##
## Password and user databases
##
#
# Password database is used to verify user's password (and nothing more).
# You can have multiple passdbs and userdbs. This is useful if you want to
# allow both system users (/etc/passwd) and virtual users to login without
# duplicating the system users into virtual database.
#
# <doc/wiki/PasswordDatabase.txt>
#
# User database specifies where mails are located and what user/group IDs
# own them. For single-UID configuration use "static" userdb.
#
# <doc/wiki/UserDatabase.txt>
#!include auth-deny.conf.ext
#!include auth-master.conf.ext
#!include auth-system.conf.ext
#!include auth-sql.conf.ext
#!include auth-ldap.conf.ext
#!include auth-passwdfile.conf.ext
#!include auth-checkpassword.conf.ext
#!include auth-vpopmail.conf.ext
#!include auth-static.conf.ext
/etc/dovecot/dovecot.conf
# Enable installed protocols
!include_try /usr/share/dovecot/protocols.d/*.protocol
listen = *, ::
base_dir = /var/run/dovecot/
# Greeting message for clients.
login_greeting = Dovecot ready.
!include conf.d/*.conf
!include_try local.conf
# Passdb SQL
passdb {
driver = sql
args = /etc/dovecot/dovecot-sql.conf.ext
}
/etc/dovecot/conf.d/10-master.conf
#default_process_limit = 100
#default_client_limit = 1000
# Default VSZ (virtual memory size) limit for service processes. This is mainly
# intended to catch and kill processes that leak memory before they eat up
# everything.
#default_vsz_limit = 256M
# Login user is internally used by login processes. This is the most untrusted
# user in Dovecot system. It shouldn't have access to anything at all.
#default_login_user = dovenull
# Internal user is used by unprivileged processes. It should be separate from
# login user, so that login processes can't disturb other processes.
#default_internal_user = dovecot
service imap-login {
inet_listener imap {
#port = 143
}
inet_listener imaps {
#port = 993
#ssl = yes
}
# Number of connections to handle before starting a new process. Typically
# the only useful values are 0 (unlimited) or 1. 1 is more secure, but 0
# is faster. <doc/wiki/LoginProcess.txt>
#service_count = 1
# Number of processes to always keep waiting for more connections.
#process_min_avail = 0
# If you set service_count=0, you probably need to grow this.
#vsz_limit = $default_vsz_limit
}
service pop3-login {
inet_listener pop3 {
#port = 110
}
inet_listener pop3s {
#port = 995
#ssl = yes
}
}
#service lmtp {
# unix_listener lmtp {
# #mode = 0666
# }
service lmtp {
unix_listener /var/spool/postfix/private/dovecot-lmtp {
mode = 0660
group = postfix
user = postfix
}
user = vmail
}
# Create inet listener only if you can't use the above UNIX socket
#inet_listener lmtp {
# Avoid making LMTP visible for the entire internet
#address =
#port =
#}
}
service imap {
# Most of the memory goes to mmap()ing files. You may need to increase this
# limit if you have huge mailboxes.
#vsz_limit = $default_vsz_limit
# Max. number of IMAP processes (connections)
#process_limit = 1024
}
service pop3 {
# Max. number of POP3 processes (connections)
#process_limit = 1024
}
service auth {
unix_listener auth-userdb {
mode = 0600
user = vmail
group = vmail
}
# Postfix smtp-auth
unix_listener /var/spool/postfix/private/auth {
mode = 0660
user = postfix
group = postfix
}
}
# Postfix smtp-auth
#unix_listener /var/spool/postfix/private/auth {
# mode = 0666
#}
# Auth process is run as this user.
#user = $default_internal_user
}
service auth-worker {
# Auth worker process is run as root by default, so that it can access
# /etc/shadow. If this isn't necessary, the user should be changed to
# $default_internal_user.
#user = root
}
service dict {
# If dict proxy is used, mail processes should have access to its socket.
# For example: mode=0660, group=vmail and global mail_access_groups=vmail
unix_listener dict {
#mode = 0600
#user =
#group =
}
}
/etc/dovecot/conf.d/15-lda.conf
##
## LDA specific settings (also used by LMTP)
##
# Address to use when sending rejection mails.
# Default is postmaster@<your domain>. %d expands to recipient domain.
postmaster_address = alex@fotoherz.org
# Hostname to use in various parts of sent mails (e.g. in Message-Id) and
# in LMTP replies. Default is the system's real hostname@domain.
#hostname =
# If user is over quota, return with temporary failure instead of
# bouncing the mail.
#quota_full_tempfail = no
# Binary to use for sending mails.
#sendmail_path = /usr/sbin/sendmail
# If non-empty, send mails via this SMTP host[:port] instead of sendmail.
#submission_host =
# Subject: header to use for rejection mails. You can use the same variables
# as for rejection_reason below.
#rejection_subject = Rejected: %s
# Human readable error message for rejection mails. You can use variables:
# %n = CRLF, %r = reason, %s = original subject, %t = recipient
#rejection_reason = Your message to <%t> was automatically rejected:%n%r
# Delimiter character between local-part and detail in email address.
#recipient_delimiter = +
# Header where the original recipient address (SMTP's RCPT TO: address) is taken
# from if not available elsewhere. With dovecot-lda -a parameter overrides this.
# A commonly used header for this is X-Original-To.
#lda_original_recipient_header =
# Should saving a mail to a nonexistent mailbox automatically create it?
#lda_mailbox_autocreate = no
# Should automatically created mailboxes be also automatically subscribed?
#lda_mailbox_autosubscribe = no
protocol lda {
# Space separated list of plugins to load (default is global mail_plugins).
#mail_plugins = $mail_plugins
}
/etc/dovecot/conf.d/10-ssl.conf
##
## SSL settings
##
# SSL/TLS support: yes, no, required. <doc/wiki/SSL.txt>
ssl = required
# PEM encoded X.509 SSL/TLS certificate and private key. They're opened before
# dropping root privileges, so keep the key file unreadable by anyone but
# root. Included doc/mkcert.sh can be used to easily generate self-signed
# certificate, just make sure to update the domains in dovecot-openssl.cnf
ssl_cert = </etc/dovecot/dovecot.pem
ssl_key = </etc/dovecot/private/dovecot.pem
# If key file is password protected, give the password here. Alternatively
# give it when starting dovecot with -p parameter. Since this file is often
# world-readable, you may want to place this setting instead to a different
# root owned 0600 file by using ssl_key_password = <path.
#ssl_key_password =
# PEM encoded trusted certificate authority. Set this only if you intend to use
# ssl_verify_client_cert=yes. The file should contain the CA certificate(s)
# followed by the matching CRL(s). (e.g. ssl_ca = </etc/ssl/certs/ca.pem)
#ssl_ca =
# Require that CRL check succeeds for client certificates.
#ssl_require_crl = yes
# Directory and/or file for trusted SSL CA certificates. These are used only
# when Dovecot needs to act as an SSL client (e.g. imapc backend). The
# directory is usually /etc/ssl/certs in Debian-based systems and the file is
# /etc/pki/tls/cert.pem in RedHat-based systems.
#ssl_client_ca_dir =
#ssl_client_ca_file =
# Request client to send a certificate. If you also want to require it, set
# auth_ssl_require_client_cert=yes in auth section.
#ssl_verify_client_cert = no
# Which field from certificate to use for username. commonName and
# x500UniqueIdentifier are the usual choices. You'll also need to set
# auth_ssl_username_from_cert=yes.
#ssl_cert_username_field = commonName
# DH parameters length to use.
#ssl_dh_parameters_length = 1024
# SSL protocols to use
ssl_protocols = !SSLv2 !SSLv3
# SSL ciphers to use
ssl_cipher_list = EDH+CAMELLIA:EDH+aRSA:EECDH+aRSA+AESGCM:EECDH+aRSA +SHA384:EECDH+aRSA+SHA256:EECDH:+CAMELLIA256:+AES2 56:+CAMELLIA128:+AES128:SSLv3:!aNULL:!eNULL:!LOW:! 3DES:!MD5:!EXP:!PSK:!DSS:!RC4:!SEED:!ECDSA:CAMELLI A256-SHA:AES256-SHA:CAMELLIA128-SHA:AES128-SHA
# Prefer the server's order of ciphers over client's.
ssl_prefer_server_ciphers = yes
# SSL crypto device to use, for valid values run "openssl engine"
#ssl_crypto_device =
/etc/postfix/main.cf
smtpd_banner = $myhostname ESMTP $mail_name (Ubuntu)
biff = no
append_dot_mydomain = no
readme_directory = no
mynetworks = 127.0.0.0/8 [::ffff:127.0.0.0]/104 [::1]/128
mydestination =
mailbox_size_limit = 1073741824
message_size_limit = 52428800
recipient_delimiter =
inet_interfaces = all
myorigin = uugoma
inet_protocols = all
##### TLS parameters ######
smtpd_tls_cert_file=/etc/ssl/certs/ssl-cert-snakeoil.pem
smtpd_tls_key_file=/etc/ssl/private/ssl-cert-snakeoil.key
smtpd_use_tls=yes
smtpd_tls_mandatory_protocols = !SSLv2, !SSLv3
smtpd_tls_session_cache_database = btree:${data_directory}/smtpd_scache
smtp_tls_session_cache_database = btree:${data_directory}/smtp_scache
###### SASL Auth ######
smtpd_sasl_type = dovecot
smtpd_sasl_path = private/auth
smtpd_sasl_auth_enable = yes
###### Use Dovecot LMTP Service to deliver Mails to Dovecot ######
virtual_transport = lmtp:unix:private/dovecot-lmtp
##### Only allow mail transport if client is authenticated or in own network (PHP Scripts, ...) ######
smtpd_recipient_restrictions = permit_mynetworks, permit_sasl_authenticated, reject_unauth_destination
###### MySQL Connection ######
virtual_alias_maps = mysql:/etc/postfix/virtual/mysql-aliases.cf
virtual_mailbox_maps = mysql:/etc/postfix/virtual/mysql-maps.cf
virtual_mailbox_domains = mysql:/etc/postfix/virtual/mysql-domains.cf
local_recipient_maps = $virtual_mailbox_maps
/etc/postfix/master.cf
#
# Postfix master process configuration file. For details on the format
# of the file, see the master(5) manual page (command: "man 5 master" or
# on-line: http://www.postfix.org/master.5.html).
#
# Do not forget to execute "postfix reload" after editing this file.
#
# ================================================== ========================
# service type private unpriv chroot wakeup maxproc command + args
# (yes) (yes) (yes) (never) (100)
# ================================================== ========================
smtp inet n - - - - smtpd
#smtp inet n - - - 1 postscreen
#smtpd pass - - - - - smtpd
#dnsblog unix - - - - 0 dnsblog
#tlsproxy unix - - - - 0 tlsproxy
submission inet n - - - - smtpd -v
-o syslog_name=postfix/submission
-o smtpd_tls_security_level=encrypt
-o smtpd_sasl_type=dovecot
-o smtpd_sasl_path=private/auth
-o smtpd_sasl_security_options=noanonymous
-o smtpd_sasl_auth_enable=yes
-o smtpd_client_restrictions=permit_sasl_authenticate d,reject
#smtps inet n - - - - smtpd
# -o syslog_name=postfix/smtps
# -o smtpd_tls_wrappermode=yes
# -o smtpd_sasl_auth_enable=yes
# -o smtpd_reject_unlisted_recipient=no
# -o smtpd_client_restrictions=$mua_client_restrictions
# -o smtpd_helo_restrictions=$mua_helo_restrictions
# -o smtpd_sender_restrictions=$mua_sender_restrictions
# -o smtpd_recipient_restrictions=
# -o smtpd_relay_restrictions=permit_sasl_authenticated ,reject
# -o milter_macro_daemon_name=ORIGINATING
#628 inet n - - - - qmqpd
pickup unix n - - 60 1 pickup
cleanup unix n - - - 0 cleanup
qmgr unix n - n 300 1 qmgr
#qmgr unix n - n 300 1 oqmgr
tlsmgr unix - - - 1000? 1 tlsmgr
rewrite unix - - - - - trivial-rewrite
bounce unix - - - - 0 bounce
defer unix - - - - 0 bounce
trace unix - - - - 0 bounce
verify unix - - - - 1 verify
flush unix n - - 1000? 0 flush
proxymap unix - - n - - proxymap
proxywrite unix - - n - 1 proxymap
smtp unix - - - - - smtp
relay unix - - - - - smtp
# -o smtp_helo_timeout=5 -o smtp_connect_timeout=5
showq unix n - - - - showq
error unix - - - - - error
retry unix - - - - - error
discard unix - - - - - discard
local unix - n n - - local
virtual unix - n n - - virtual
lmtp unix - - - - - lmtp
anvil unix - - - - 1 anvil
scache unix - - - - 1 scache
#
# ================================================== ==================
# Interfaces to non-Postfix software. Be sure to examine the manual
# pages of the non-Postfix software to find out what options it wants.
#
# Many of the following services use the Postfix pipe(8) delivery
# agent. See the pipe(8) man page for information about ${recipient}
# and other message envelope options.
# ================================================== ==================
#
# maildrop. See the Postfix MAILDROP_README file for details.
# Also specify in main.cf: maildrop_destination_recipient_limit=1
#
maildrop unix - n n - - pipe
flags=DRhu user=vmail argv=/usr/bin/maildrop -d ${recipient}
#
# ================================================== ==================
#
# Recent Cyrus versions can use the existing "lmtp" master.cf entry.
#
# Specify in cyrus.conf:
# lmtp cmd="lmtpd -a" listen="localhost:lmtp" proto=tcp4
#
# Specify in main.cf one or more of the following:
# mailbox_transport = lmtp:inet:localhost
# virtual_transport = lmtp:inet:localhost
#
# ================================================== ==================
#
# Cyrus 2.1.5 (Amos Gouaux)
# Also specify in main.cf: cyrus_destination_recipient_limit=1
#
#cyrus unix - n n - - pipe
# user=cyrus argv=/cyrus/bin/deliver -e -r ${sender} -m ${extension} ${user}
#
# ================================================== ==================
# Old example of delivery via Cyrus.
#
#old-cyrus unix - n n - - pipe
# flags=R user=cyrus argv=/cyrus/bin/deliver -e -m ${extension} ${user}
#
# ================================================== ==================
#
# See the Postfix UUCP_README file for configuration details.
#
uucp unix - n n - - pipe
flags=Fqhu user=uucp argv=uux -r -n -z -a$sender - $nexthop!rmail ($recipient)
#
# Other external delivery methods.
#
ifmail unix - n n - - pipe
flags=F user=ftn argv=/usr/lib/ifmail/ifmail -r $nexthop ($recipient)
bsmtp unix - n n - - pipe
flags=Fq. user=bsmtp argv=/usr/lib/bsmtp/bsmtp -t$nexthop -f$sender $recipient
scalemail-backend unix - n n - 2 pipe
flags=R user=scalemail argv=/usr/lib/scalemail/bin/scalemail-store ${nexthop} ${user} ${extension}
mailman unix - n n - - pipe
flags=FR user=list argv=/usr/lib/mailman/bin/postfix-to-mailman.py
${nexthop} ${user}
/etc/postfix/virtual/mysql-maps.cf
user = vmail
password = xyz
hosts = 127.0.0.1
dbname = vmail
query = SELECT * FROM users WHERE username='%u' AND domain='%d'
/etc/postfix/virtual/mysql-aliases.cf
user = vmail
password = xyz
hosts = 127.0.0.1
dbname = vmail
query = SELECT destination FROM aliases WHERE source='%s'
/etc/postfix/virtual/mysql-domains.cf
user = vmail
password = xyz
hosts = 127.0.0.1
dbname = vmail
query = SELECT * FROM domains WHERE domain='%s'