PDA

Archiv verlassen und diese Seite im Standarddesign anzeigen : SPDIF durchschleifen



smoneck
01.03.14, 00:12
Guten Abend, :)

ich hoffe, ich bin hier in der richtigen Ecke fuer das Thema gelandet!

Problem: Mein Receiver hat nur einen funktionierenden SPDIF Eingang uebrig, da sollen aber zwei Toslink-Stecker dran, damit ich nicht immer umstoepseln muss (das ist super fummelig und dunkel da).

Idee: An diesem SPDIF-Eingang des Receivers haengt meine USB-Soundkarte (http://www.amazon.de/SWEEX-External-Sound-Karte-Optical/dp/B00265L1S2/ref=sr_1_1?ie=UTF8&qid=1393628655&sr=8-1). Diese hat aber auch noch einen SPDIF IN Port. Ich dachte mir, ich koennte jetzt das zweite Geraet in den SPDIF IN stecken und das einfach gleich wieder ueber OUT zum Receiver schleifen.

Mit meinem Latein bin ich jedoch am Ende - hat irgendjemand eine Idee, wie man das drehen kann?

System ist Debian mit:



aplay -l

**** List of PLAYBACK Hardware Devices ****
card 0: Intel [HDA Intel], device 0: ALC269 Analog [ALC269 Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: Device [USB Sound Device], device 0: USB Audio [USB Audio]
Subdevices: 1/1
Subdevice #0: subdevice #0


aplay -L
null
Discard all samples (playback) or generate zero samples (capture)
pulse
Playback/recording through the PulseAudio sound server
sysdefault:CARD=Intel
HDA Intel, ALC269 Analog
Default Audio Device
front:CARD=Intel,DEV=0
HDA Intel, ALC269 Analog
Front speakers
surround40:CARD=Intel,DEV=0
HDA Intel, ALC269 Analog
4.0 Surround output to Front and Rear speakers
surround41:CARD=Intel,DEV=0
HDA Intel, ALC269 Analog
4.1 Surround output to Front, Rear and Subwoofer speakers
surround50:CARD=Intel,DEV=0
HDA Intel, ALC269 Analog
5.0 Surround output to Front, Center and Rear speakers
surround51:CARD=Intel,DEV=0
HDA Intel, ALC269 Analog
5.1 Surround output to Front, Center, Rear and Subwoofer speakers
surround71:CARD=Intel,DEV=0
HDA Intel, ALC269 Analog
7.1 Surround output to Front, Center, Side, Rear and Woofer speakers
sysdefault:CARD=Device
USB Sound Device, USB Audio
Default Audio Device
front:CARD=Device,DEV=0
USB Sound Device, USB Audio
Front speakers
surround40:CARD=Device,DEV=0
USB Sound Device, USB Audio
4.0 Surround output to Front and Rear speakers
surround41:CARD=Device,DEV=0
USB Sound Device, USB Audio
4.1 Surround output to Front, Rear and Subwoofer speakers
surround50:CARD=Device,DEV=0
USB Sound Device, USB Audio
5.0 Surround output to Front, Center and Rear speakers
surround51:CARD=Device,DEV=0
USB Sound Device, USB Audio
5.1 Surround output to Front, Center, Rear and Subwoofer speakers
surround71:CARD=Device,DEV=0
USB Sound Device, USB Audio
7.1 Surround output to Front, Center, Side, Rear and Woofer speakers
iec958:CARD=Device,DEV=0
USB Sound Device, USB Audio
IEC958 (S/PDIF) Digital Audio Output

Ganz lieben Dank bereits fuer jegliche Muehen!

Stephan

pferdefreund
03.03.14, 10:16
Schau dir mal jack an - eventuell läßt sich das damit routen - da kann man Aus- und EIngänge verbinden. Im Mixer muß natürlich entsprechen capture gesetzt und eingestellt sein. Eventuell geht das auch mit pulseaudio - aber ich, als Hobbymusiker bevorzuge Jack wegen der Latenz.