mumudvb "Card not tuned after timeout"

[blubbersuelze]

Hallo zusammen,

ich würde gerne mumudvb zum laufen bekommen um einen Multicast Streamserver für meine DVB-S Karte zu haben.
die DVB-S Karte funktioniert ohne Probleme und ist auch funktionabel installiert.(Mit einer anderen Streaminsoftware getestet)

Leider bekomme ich beim starten von MumuDVB immer nach einer Weile des
scannens folgenden Fehler:
"Info: Main: Card not tuned after timeout - exiting"

Es handelt sich um ein Ubuntu Saucy
Kernel: 3.11.0-13-generic
MumuDVB: 1.7.1-1

Syslog und desgleichen geben leider auch keine weiteren Informationen.

Hier das Configfile und die Ausgabe:

/etc/mumudvb/example.conf:


autoconfiguration=full
freq=11785
pol=h
srate=27500





root@streamserver:/etc/mumudvb# /usr/bin/mumudvb -vvv -s -d -c /etc/mumudvb/example.conf
MuMuDVB Version 1.7.1
--- Build information ---
Built with CAM support.
Built without transcoding support.
Built with ATSC support.
Built with ATSC long channel names support.
Built with support for DVB API Version 5.
---------
Originally based on dvbstream 0.6 by (C) Dave Chapman 2001-2004
Released under the GPL.
Latest version available from http://mumudvb.braice.net/
Project from the cr@ns (http://www.crans.org)
by Brice DUBOST (mumudvb@braice.net)

Deb2: Main: ==== Configuration file ====
Deb2: Main: 001 autoconfiguration=full
Deb2: Main: 002 freq=11785
Deb2: Main: 003 pol=h
Deb2: Main: 004 srate=27500
Deb2: Main: ============ done ===========
Info: Main: Full autoconfiguration, we activate SAP announces. if you want to deactivate them see the README.
Info: Main: Full autoconfiguration, we activate PAT rewritting. if you want to deactivate it see the README.
Info: Main: Full autoconfiguration, we activate SDT rewritting. if you want to deactivate it see the README.
Info: Main: Full autoconfiguration, we activate sorting of the EIT PID. if you want to deactivate it see the README.
Info: Main: ========== End of configuration, MuMuDVB version 1.7.1 is starting ==========
Info: Autoconf: The autoconfiguration auto update is enabled. If you want to disable it put "autoconf_pid_update=0" in your config file.
Info: Main: Streaming. Freq 11785000
Info: Tune: Using DVB card "STV090x Multistandard" tuner 0
Info: Tune: Tuning DVB-S to Freq: 1185000 kHz, LO frequency 10600000 kHz Pol:H Srate=27500000, LNB number: 0
Info: Tune: LNB voltage 18V
Info: Tune: DISEQC SETTING SUCCEDED
Deb0: Tune: polling....
Deb0: Tune: Getting frontend event
Info: Tune: FE_STATUS:
Info: Tune: Strength: 47185
Info: Tune: SNR: 0
Deb0: Tune: polling....
Deb0: Tune: Getting frontend event
Info: Tune: FE_STATUS:
Info: Tune: FE_HAS_SIGNAL : found something above the noise level
Info: Tune: FE_HAS_CARRIER : found a DVB signal
Info: Tune: Strength: 47185
Info: Tune: SNR: 0
Deb0: Tune: polling....
Info: Tune: Strength: 47185
Info: Tune: SNR: 0
Deb0: Tune: polling....
Info: Tune: Strength: 47840
Info: Tune: SNR: 0
Deb0: Tune: polling....
Info: Tune: Strength: 47840
Info: Tune: SNR: 0
Deb0: Tune: polling....
Info: Tune: Strength: 47840
Info: Tune: SNR: 0
Deb0: Tune: polling....
Deb0: Tune: Getting frontend event
Info: Tune: FE_STATUS:
Info: Tune: Strength: 47840
Info: Tune: SNR: 0
Deb0: Tune: polling....
Deb0: Tune: Getting frontend event
Info: Tune: FE_STATUS:
Info: Tune: FE_HAS_SIGNAL : found something above the noise level
Info: Tune: FE_HAS_CARRIER : found a DVB signal
Info: Tune: Strength: 47840
Info: Tune: SNR: 0
Deb0: Tune: polling....
Info: Tune: Strength: 47840
Info: Tune: SNR: 0
Deb0: Tune: polling....
Info: Tune: Strength: 47840
Info: Tune: SNR: 0
Deb0: Tune: polling....
Deb0: Tune: Getting frontend event
Info: Tune: FE_STATUS:
Info: Tune: Strength: 47840
Info: Tune: SNR: 0
Deb0: Tune: polling....
Deb0: Tune: Getting frontend event
Info: Tune: FE_STATUS:
Info: Tune: FE_HAS_SIGNAL : found something above the noise level
Info: Tune: FE_HAS_CARRIER : found a DVB signal
Info: Tune: Strength: 47840
Info: Tune: SNR: 0
Deb0: Tune: polling....
Deb0: Tune: Getting frontend event
Info: Tune: FE_STATUS:
Info: Tune: Strength: 47840
Info: Tune: SNR: 0
Deb0: Tune: polling....
Deb0: Tune: Getting frontend event
Info: Tune: FE_STATUS:
Info: Tune: FE_HAS_SIGNAL : found something above the noise level
Info: Tune: FE_HAS_CARRIER : found a DVB signal
Info: Tune: Strength: 47840
Info: Tune: SNR: 0
Deb0: Tune: polling....
Deb0: Tune: Getting frontend event
Info: Tune: FE_STATUS:
Info: Tune: Strength: 47840
Info: Tune: SNR: 0
Deb0: Tune: polling....
Deb0: Tune: Getting frontend event
Info: Tune: FE_STATUS:
Info: Tune: FE_HAS_SIGNAL : found something above the noise level
Info: Tune: FE_HAS_CARRIER : found a DVB signal
Info: Tune: Strength: 47840
Info: Tune: SNR: 0
Deb0: Tune: polling....
Info: Main: Card not tuned after timeout - exiting
root@streamserver:/etc/mumudvb#




ich hoffe das mir da jemand bei helfen kann.

mfg.
blubbersuelze :p