PDA

Archiv verlassen und diese Seite im Standarddesign anzeigen : Suse12.1 Nameserver



andy135
11.10.12, 00:03
Hallo zusammen,

jetzt habe ich wohl das Problem, dass man Bind nicht starten will, obwohl ich der Meinung bin, dass ich alles richtig konfiguriert habe. Habe das ja schon mal gemacht. Hier ein Auszug aus /var/log messages:

Oct 10 23:49:50 linuxserv named[1838]: BIND 9 is maintained by Internet Systems Consortium,
Oct 10 23:49:50 linuxserv named[1838]: Inc. (ISC), a non-profit 501(c)(3) public-benefit
Oct 10 23:49:50 linuxserv named[1838]: corporation. Support and training for BIND 9 are
Oct 10 23:49:50 linuxserv named[1838]: available at https://www.isc.org/support
Oct 10 23:49:50 linuxserv named[1838]: ----------------------------------------------------
Oct 10 23:49:50 linuxserv named[1838]: adjusted limit on open files from 4096 to 1048576
Oct 10 23:49:50 linuxserv named[1838]: found 1 CPU, using 1 worker thread
Oct 10 23:49:50 linuxserv named[1838]: using up to 4096 sockets
Oct 10 23:49:50 linuxserv named[1838]: sdb.c:219: REQUIRE(methods->lookup != ((void *)0)) failed, back trace
Oct 10 23:49:50 linuxserv named[1838]: #0 0xb7873858 in ??
Oct 10 23:49:50 linuxserv named[1838]: #1 0xb75d9eb4 in ??
Oct 10 23:49:50 linuxserv named[1838]: #2 0xb77546df in ??
Oct 10 23:49:50 linuxserv named[1838]: #3 0xb786398a in ??
Oct 10 23:49:50 linuxserv named[1838]: #4 0xb786295f in ??
Oct 10 23:49:50 linuxserv named[1838]: #5 0xb6fdd003 in ??
Oct 10 23:49:50 linuxserv named[1838]: #6 0xb7862c11 in ??
Oct 10 23:49:50 linuxserv named[1838]: exiting (due to assertion failure)
Oct 10 23:49:50 linuxserv named[1791]: Starting name server BIND ..failed
Oct 10 23:49:50 linuxserv systemd[1]: named.service: control process exited, code=exited status=1
Oct 10 23:49:50 linuxserv systemd[1]: Unit named.service entered failed state.


Kann mir jemand weiterhelfen ???

Danke

DrunkenFreak
11.10.12, 17:30
Debugging hochschrauben, config posten...

andy135
11.10.12, 18:19
und wie geht das ???

ich meine, das Debugging hochschrauben......

Named.conf folgt

andy135
11.10.12, 19:02
Folgend ist noch meine named.conf zu sehen:

# Copyright (c) 2001-2004 SuSE Linux AG, Nuernberg, Germany.
# All rights reserved.
#
# Author: Frank Bodammer, Lars Mueller <lmuelle@suse.de>
#
# /etc/named.conf
#
# This is a sample configuration file for the name server BIND 9. It works as
# a caching only name server without modification.
#
# A sample configuration for setting up your own domain can be found in
# /usr/share/doc/packages/bind/sample-config.
#
# A description of all available options can be found in
# /usr/share/doc/packages/bind/misc/options.

options {

# The directory statement defines the name server's working directory

directory "/var/lib/named";
managed-keys-directory "/var/lib/named/dyn/";

# Write dump and statistics file to the log subdirectory. The
# pathenames are relative to the chroot jail.

dump-file "/var/log/named_dump.db";
statistics-file "/var/log/named.stats";

# The forwarders record contains a list of servers to which queries
# should be forwarded. Enable this line and modify the IP address to
# your provider's name server. Up to three servers may be listed.

#forwarders { 192.0.2.1; 192.0.2.2; };

# Enable the next entry to prefer usage of the name server declared in
# the forwarders section.

#forward first;

# The listen-on record contains a list of local network interfaces to
# listen on. Optionally the port can be specified. Default is to
# listen on all interfaces found on your system. The default port is
# 53.

#listen-on port 53 { 127.0.0.1; };

# The listen-on-v6 record enables or disables listening on IPv6
# interfaces. Allowed values are 'any' and 'none' or a list of
# addresses.

# listen-on-v6 { any; };

# The next three statements may be needed if a firewall stands between
# the local server and the internet.

#query-source address * port 53;
#transfer-source * port 53;
#notify-source * port 53;

# The allow-query record contains a list of networks or IP addresses
# to accept and deny queries from. The default is to allow queries
# from all hosts.

allow-query { 192.168.0.0/24; };

# If notify is set to yes (default), notify messages are sent to other
# name servers when the the zone data is changed. Instead of setting
# a global 'notify' statement in the 'options' section, a separate
# 'notify' can be added to each zone definition.

notify no;

disable-empty-zone "1.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0. 0.0.0.0.0.0.0.IP6.ARPA";
include "/etc/named.d/forwarders.conf";
};

# To configure named's logging remove the leading '#' characters of the
# following examples.
#logging {
# # Log queries to a file limited to a size of 100 MB.
# channel query_logging {
# file "/var/log/named_querylog"
# versions 3 size 100M;
# print-time yes; // timestamp log entries
# };
# category queries {
# query_logging;
# };
#
# # Or log this kind alternatively to syslog.
# channel syslog_queries {
# syslog user;
# severity info;
# };
# category queries { syslog_queries; };
#
# # Log general name server errors to syslog.
# channel syslog_errors {
# syslog user;
# severity error;
# };
# category default { syslog_errors; };
#
# # Don't log lame server messages.
# category lame-servers { null; };
#};

# The following zone definitions don't need any modification. The first one
# is the definition of the root name servers. The second one defines
# localhost while the third defines the reverse lookup for localhost.

zone "." in {
type hint;
file "root.hint";
};

zone "localhost" in {
type master;
file "localhost.zone";
};

zone "0.0.127.in-addr.arpa" in {
type master;
file "127.0.0.zone";
};


# Include the meta include file generated by createNamedConfInclude. This
# includes all files as configured in NAMED_CONF_INCLUDE_FILES from
# /etc/sysconfig/named

include "/etc/named.conf.include";
zone "netzmafia.home" in {
allow-transfer { none; };
file "master/netzmafia.home";
type master;
};
zone "0.168.192.in-addr.arpa" in {
allow-transfer { none; };
file "master/0.168.192.in-addr.arpa";
type master;
};
logging {
category default { log_syslog; };
channel log_syslog { syslog; };
};

# You can insert further zone records for your own domains below or create
# single files in /etc/named.d/ and add the file names to
# NAMED_CONF_INCLUDE_FILES.
# See /usr/share/doc/packages/bind/README.SUSE for more details.

andy135
11.10.12, 22:42
Desweiteren kommt beim Starten des Servers auf der Konsole die Meldung:

rcnamed start
redirecting to systemctl
Job failed. See system logs and 'systemctl status' for details.