Fedora 15 udev rules.d symlink für usb com ports

[y0d4]

Hi

Bis Fedora 14 konnte ich einwandfrei mit den udevrules arbeiten, nun bei fc 15 will es einfach nicht.
Datei ist in /etc/udev/rules.d und nennt sich 10-usbadapter.rules drinn steht :

SUBSYSTEMS=="usb", KERNEL=="ttyUSB*", ATTRS{serial}=="A900eYeu", SYMLINK+="com1"
SUBSYSTEMS=="usb", KERNEL=="ttyUSB*", ATTRS{serial}=="A700afy8", SYMLINK+="com2"
SUBSYSTEMS=="usb", KERNEL=="ttyUSB*", ATTRS{serial}=="A900eYcl", SYMLINK+="com3"
SUBSYSTEMS=="usb", KERNEL=="ttyUSB*", ATTRS{serial}=="A900eYel", SYMLINK+="com4"
SUBSYSTEMS=="usb", KERNEL=="ttyUSB*", ATTRS{serial}=="A900eYtl", SYMLINK+="com5"

die datei selbst habe ich 1 zu 1 kopiert und rechte sind auch da, wo ist mein fehler ???????

Wenn wir dabei sind, ist usb 3 im kernel wieder aktiviert bei fc15 ????

[buzz768]

udevadm info --attribute-walk --name=/dev/ttyUSB0

ergibt?

[y0d4]

looking at device '/devices/pci0000:00/0000:00:02.1/usb1/1-1/1-1.2/1-1.2:1.0/ttyUSB0/tty/ttyUSB0':
KERNEL=="ttyUSB0"
SUBSYSTEM=="tty"
DRIVER==""

looking at parent device '/devices/pci0000:00/0000:00:02.1/usb1/1-1/1-1.2/1-1.2:1.0/ttyUSB0':
KERNELS=="ttyUSB0"
SUBSYSTEMS=="usb-serial"
DRIVERS=="ftdi_sio"
ATTRS{latency_timer}=="1"
ATTRS{port_number}=="0"

looking at parent device '/devices/pci0000:00/0000:00:02.1/usb1/1-1/1-1.2/1-1.2:1.0':
KERNELS=="1-1.2:1.0"
SUBSYSTEMS=="usb"
DRIVERS=="ftdi_sio"
ATTRS{bInterfaceNumber}=="00"
ATTRS{bAlternateSetting}==" 0"
ATTRS{bNumEndpoints}=="02"
ATTRS{bInterfaceClass}=="ff"
ATTRS{bInterfaceSubClass}=="ff"
ATTRS{bInterfaceProtocol}=="ff"
ATTRS{modalias}=="usb:v0403p6001d0600dc00dsc00dp00icFFiscFFipFF"
ATTRS{supports_autosuspend}=="1"
ATTRS{interface}=="FT232R USB UART"

looking at parent device '/devices/pci0000:00/0000:00:02.1/usb1/1-1/1-1.2':
KERNELS=="1-1.2"
SUBSYSTEMS=="usb"
DRIVERS=="usb"
ATTRS{configuration}==""
ATTRS{bNumInterfaces}==" 1"
ATTRS{bConfigurationValue}=="1"
ATTRS{bmAttributes}=="a0"
ATTRS{bMaxPower}==" 90mA"
ATTRS{urbnum}=="284270969"
ATTRS{idVendor}=="0403"
ATTRS{idProduct}=="6001"
ATTRS{bcdDevice}=="0600"
ATTRS{bDeviceClass}=="00"
ATTRS{bDeviceSubClass}=="00"
ATTRS{bDeviceProtocol}=="00"
ATTRS{bNumConfigurations}=="1"
ATTRS{bMaxPacketSize0}=="8"
ATTRS{speed}=="12"
ATTRS{busnum}=="1"
ATTRS{devnum}=="5"
ATTRS{devpath}=="1.2"
ATTRS{version}==" 2.00"
ATTRS{maxchild}=="0"
ATTRS{quirks}=="0x0"
ATTRS{avoid_reset_quirk}=="0"
ATTRS{authorized}=="1"
ATTRS{manufacturer}=="FTDI"
ATTRS{product}=="FT232R USB UART"
ATTRS{serial}=="A700afy8"

looking at parent device '/devices/pci0000:00/0000:00:02.1/usb1/1-1':
KERNELS=="1-1"
SUBSYSTEMS=="usb"
DRIVERS=="usb"
ATTRS{configuration}==""
ATTRS{bNumInterfaces}==" 1"
ATTRS{bConfigurationValue}=="1"
ATTRS{bmAttributes}=="e0"
ATTRS{bMaxPower}=="100mA"
ATTRS{urbnum}=="101"
ATTRS{idVendor}=="1a40"
ATTRS{idProduct}=="0201"
ATTRS{bcdDevice}=="0100"
ATTRS{bDeviceClass}=="09"
ATTRS{bDeviceSubClass}=="00"
ATTRS{bDeviceProtocol}=="02"
ATTRS{bNumConfigurations}=="1"
ATTRS{bMaxPacketSize0}=="64"
ATTRS{speed}=="480"
ATTRS{busnum}=="1"
ATTRS{devnum}=="2"
ATTRS{devpath}=="1"
ATTRS{version}==" 2.00"
ATTRS{maxchild}=="7"
ATTRS{quirks}=="0x0"
ATTRS{avoid_reset_quirk}=="0"
ATTRS{authorized}=="1"
ATTRS{product}=="USB 2.0 Hub [MTT]"

looking at parent device '/devices/pci0000:00/0000:00:02.1/usb1':
KERNELS=="usb1"
SUBSYSTEMS=="usb"
DRIVERS=="usb"
ATTRS{configuration}==""
ATTRS{bNumInterfaces}==" 1"
ATTRS{bConfigurationValue}=="1"
ATTRS{bmAttributes}=="e0"
ATTRS{bMaxPower}==" 0mA"
ATTRS{urbnum}=="50"
ATTRS{idVendor}=="1d6b"
ATTRS{idProduct}=="0002"
ATTRS{bcdDevice}=="0206"
ATTRS{bDeviceClass}=="09"
ATTRS{bDeviceSubClass}=="00"
ATTRS{bDeviceProtocol}=="00"
ATTRS{bNumConfigurations}=="1"
ATTRS{bMaxPacketSize0}=="64"
ATTRS{speed}=="480"
ATTRS{busnum}=="1"
ATTRS{devnum}=="1"
ATTRS{devpath}=="0"
ATTRS{version}==" 2.00"
ATTRS{maxchild}=="10"
ATTRS{quirks}=="0x0"
ATTRS{avoid_reset_quirk}=="0"
ATTRS{authorized}=="1"
ATTRS{manufacturer}=="Linux 2.6.35.14-96.fc14.i686 ehci_hcd"
ATTRS{product}=="EHCI Host Controller"
ATTRS{serial}=="0000:00:02.1"
ATTRS{authorized_default}=="1"

looking at parent device '/devices/pci0000:00/0000:00:02.1':
KERNELS=="0000:00:02.1"
SUBSYSTEMS=="pci"
DRIVERS=="ehci_hcd"
ATTRS{vendor}=="0x10de"
ATTRS{device}=="0x03f2"
ATTRS{subsystem_vendor}=="0x1849"
ATTRS{subsystem_device}=="0x03f2"
ATTRS{class}=="0x0c0320"
ATTRS{irq}=="23"
ATTRS{local_cpus}=="ffffffff,ffffffff"
ATTRS{local_cpulist}=="0-63"
ATTRS{modalias}=="pci:v000010DEd000003F2sv00001849sd000003F2bc0Csc03 i20"
ATTRS{dma_mask_bits}=="32"
ATTRS{consistent_dma_mask_bits}=="32"
ATTRS{enable}=="1"
ATTRS{broken_parity_status}=="0"
ATTRS{msi_bus}==""
ATTRS{companion}==""

looking at parent device '/devices/pci0000:00':
KERNELS=="pci0000:00"
SUBSYSTEMS==""
DRIVERS==""

[buzz768]

Ich würde es mal mit SUBSYSTEM=="tty" anstelle von SUBSYSTEMS=="usb" versuchen.

[y0d4]

falscher rechner, an dem ging es ja ^^

hier der wo es nicht geht, zwar anderer com port zum testen aber diese ausgabe:


Udevadm info starts with the device specified by the devpath and then
walks up the chain of parent devices. It prints for every device
found, all possible attributes in the udev rules key format.
A rule to match, can be composed by the attributes of the device
and the attributes from one single parent device.

looking at device '/devices/pci0000:00/0000:00:1d.2/usb4/4-2/4-2:1.0/ttyUSB0/t ty/ttyUSB0':
KERNEL=="ttyUSB0"
SUBSYSTEM=="tty"
DRIVER==""

looking at parent device '/devices/pci0000:00/0000:00:1d.2/usb4/4-2/4-2:1.0/tt yUSB0':
KERNELS=="ttyUSB0"
SUBSYSTEMS=="usb-serial"
DRIVERS=="ftdi_sio"
ATTRS{latency_timer}=="1"
ATTRS{port_number}=="0"

looking at parent device '/devices/pci0000:00/0000:00:1d.2/usb4/4-2/4-2:1.0':
KERNELS=="4-2:1.0"
SUBSYSTEMS=="usb"
DRIVERS=="ftdi_sio"
ATTRS{bInterfaceNumber}=="00"
ATTRS{bAlternateSetting}==" 0"
ATTRS{bNumEndpoints}=="02"
ATTRS{bInterfaceClass}=="ff"
ATTRS{bInterfaceSubClass}=="ff"
ATTRS{bInterfaceProtocol}=="ff"
ATTRS{supports_autosuspend}=="1"
ATTRS{interface}=="FT232R USB UART"

looking at parent device '/devices/pci0000:00/0000:00:1d.2/usb4/4-2':
KERNELS=="4-2"
SUBSYSTEMS=="usb"
DRIVERS=="usb"
ATTRS{configuration}==""
ATTRS{bNumInterfaces}==" 1"
ATTRS{bConfigurationValue}=="1"
ATTRS{bmAttributes}=="a0"
ATTRS{bMaxPower}==" 90mA"
ATTRS{urbnum}=="9040"
ATTRS{idVendor}=="0403"
ATTRS{idProduct}=="6001"
ATTRS{bcdDevice}=="0600"
ATTRS{bDeviceClass}=="00"
ATTRS{bDeviceSubClass}=="00"
ATTRS{bDeviceProtocol}=="00"
ATTRS{bNumConfigurations}=="1"
ATTRS{bMaxPacketSize0}=="8"
ATTRS{speed}=="12"
ATTRS{busnum}=="4"
ATTRS{devnum}=="2"
ATTRS{devpath}=="2"
ATTRS{version}==" 2.00"
ATTRS{maxchild}=="0"
ATTRS{quirks}=="0x0"
ATTRS{avoid_reset_quirk}=="0"
ATTRS{authorized}=="1"
ATTRS{manufacturer}=="FTDI"
ATTRS{product}=="FT232R USB UART"
ATTRS{serial}=="A900eYGQ"

looking at parent device '/devices/pci0000:00/0000:00:1d.2/usb4':
KERNELS=="usb4"
SUBSYSTEMS=="usb"
DRIVERS=="usb"
ATTRS{configuration}==""
ATTRS{bNumInterfaces}==" 1"
ATTRS{bConfigurationValue}=="1"
ATTRS{bmAttributes}=="e0"
ATTRS{bMaxPower}==" 0mA"
ATTRS{urbnum}=="51"
ATTRS{idVendor}=="1d6b"
ATTRS{idProduct}=="0001"
ATTRS{bcdDevice}=="0206"
ATTRS{bDeviceClass}=="09"
ATTRS{bDeviceSubClass}=="00"
ATTRS{bDeviceProtocol}=="00"
ATTRS{bNumConfigurations}=="1"
ATTRS{bMaxPacketSize0}=="64"
ATTRS{speed}=="12"
ATTRS{busnum}=="4"
ATTRS{devnum}=="1"
ATTRS{devpath}=="0"
ATTRS{version}==" 1.10"
ATTRS{maxchild}=="2"
ATTRS{quirks}=="0x0"
ATTRS{avoid_reset_quirk}=="0"
ATTRS{authorized}=="1"
ATTRS{manufacturer}=="Linux 2.6.40.4-5.fc15.i686.PAE uhci_hcd"
ATTRS{product}=="UHCI Host Controller"
ATTRS{serial}=="0000:00:1d.2"
ATTRS{authorized_default}=="1"

looking at parent device '/devices/pci0000:00/0000:00:1d.2':
KERNELS=="0000:00:1d.2"
SUBSYSTEMS=="pci"
DRIVERS=="uhci_hcd"
ATTRS{vendor}=="0x8086"
ATTRS{device}=="0x27ca"
ATTRS{subsystem_vendor}=="0x8086"
ATTRS{subsystem_device}=="0x464c"
ATTRS{class}=="0x0c0300"
ATTRS{irq}=="18"
ATTRS{local_cpus}=="ffffffff,ffffffff"
ATTRS{local_cpulist}=="0-63"
ATTRS{dma_mask_bits}=="32"
ATTRS{consistent_dma_mask_bits}=="32"
ATTRS{enable}=="1"
ATTRS{broken_parity_status}=="0"
ATTRS{msi_bus}==""

looking at parent device '/devices/pci0000:00':
KERNELS=="pci0000:00"
SUBSYSTEMS==""
DRIVERS==""

[y0d4]

SUBSYSTEMS=="tty", KERNEL=="ttyUSB*", ATTRS{serial}=="A900eYGQ", SYMLINK+="com1"

geht nicht

SUBSYSTEMS=="usb-serial", KERNEL=="ttyUSB*", ATTRS{serial}=="A900eYGQ", SYMLINK+="com1"

geht auch nicht :confused::confused::confused:

[buzz768]

SUBSYSTEM=="tty"

nicht SUBSYSTEMS

Dass es mit usb-serial nicht funktioniert, ließe sich erklären (man udev)


If multiple keys that match a parent device are specified in a single
rule, all these keys must match at one and the same parent device

[y0d4]

Wer lesen kann ist gaaaanz klar im vorteil :D

Supi, dank dir, hat geklappt.