ISPConfig3 PureFTP bleibt Offline

[norreyy]

Hallo,

hab ein Problem mit meiner ISPConfig3.

Hab alles nach dieser Anleitung gemacht: klick (http://www.howtoforge.de/blogroll/perfekte-server%E2%80%93debian-lenny-debian-5-0-ispconfig-3-mit-dovecot-und-bind/) aber ich bekomm dennoch folgendes im ISPConfig3 zu sehen (Das Bild1 im Anhang).


Außerdem bekam ich bei der Installation folgenden Fehler:

srv:~#
srv:~# /etc/init.d/openbsd-inetd restart
Restarting internet superserver: inetdNot starting internet superserver: no services enabled.
srv:~#
Dieser Befehl ist in der Anleitung auf der Seite 4 unter dem Punkt 12 zu finden.

Was mach ich Falsch? Warum will PureFTP nicht?

Ich mach doch alles genau nach Anleitung :(

MfG
NoRrEyY

[drcux]

Auch das gemacht?

/etc/init.d/pure-ftpd-mysql start

[norreyy]

Jawohl, und der Dienst ist immer noch Offline.

MfG
NoRrEyY

[drcux]

Und es gibt keine Fehlermeldungen/Logfiles?

[norreyy]

das is das einzige was ich hab:
May 10 13:43:10 srv kernel: [ 3.752094] ide1: BM-DMA at 0xd008-0xd00f
May 10 13:43:10 srv kernel: [ 3.809502] usbcore: registered new interface driver usbfs
May 10 13:43:10 srv kernel: [ 3.809591] usbcore: registered new interface driver hub
May 10 13:43:10 srv kernel: [ 3.809672] usbcore: registered new device driver usb
May 10 13:43:10 srv kernel: [ 3.813985] USB Universal Host Controller Interface driver v3.0
May 10 13:43:10 srv kernel: [ 3.853848] 8139too Fast Ethernet driver 0.9.28
May 10 13:43:10 srv kernel: [ 3.992250] Floppy drive(s): fd0 is 1.44M
May 10 13:43:10 srv kernel: [ 4.012767] FDC 0 is a post-1991 82077
May 10 13:43:10 srv kernel: [ 4.168278] hda: IC35L040AVVN07-0, ATA DISK drive
May 10 13:43:10 srv kernel: [ 4.448198] hdb: Maxtor 4D040H2, ATA DISK drive
May 10 13:43:10 srv kernel: [ 4.504542] hda: UDMA/100 mode selected
May 10 13:43:10 srv kernel: [ 4.505055] hdb: UDMA/100 mode selected
May 10 13:43:10 srv kernel: [ 5.368216] hdc: _NEC DVD_RW ND-3520A, ATAPI CD/DVD-ROM drive
May 10 13:43:10 srv kernel: [ 6.040302] hdc: UDMA/33 mode selected
May 10 13:43:10 srv kernel: [ 6.040512] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
May 10 13:43:10 srv kernel: [ 6.044922] ide1 at 0x170-0x177,0x376 on irq 15
May 10 13:43:10 srv kernel: [ 6.046124] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
May 10 13:43:10 srv kernel: [ 6.046124] ACPI: PCI Interrupt 0000:00:07.2[D] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
May 10 13:43:10 srv kernel: [ 6.046124] uhci_hcd 0000:00:07.2: VIA VLink IRQ fixup, from 9 to 11
May 10 13:43:10 srv kernel: [ 6.046124] uhci_hcd 0000:00:07.2: UHCI Host Controller
May 10 13:43:10 srv kernel: [ 6.046124] uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1
May 10 13:43:10 srv kernel: [ 6.046124] uhci_hcd 0000:00:07.2: irq 11, io base 0x0000d400
May 10 13:43:10 srv kernel: [ 6.046124] usb usb1: configuration #1 chosen from 1 choice
May 10 13:43:10 srv kernel: [ 6.046124] hub 1-0:1.0: USB hub found
May 10 13:43:10 srv kernel: [ 6.046124] hub 1-0:1.0: 2 ports detected
May 10 13:43:10 srv kernel: [ 6.152366] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
May 10 13:43:10 srv kernel: [ 6.152378] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
May 10 13:43:10 srv kernel: [ 6.152384] usb usb1: Product: UHCI Host Controller
May 10 13:43:10 srv kernel: [ 6.152388] usb usb1: Manufacturer: Linux 2.6.26-2-686 uhci_hcd
May 10 13:43:10 srv kernel: [ 6.152392] usb usb1: SerialNumber: 0000:00:07.2
May 10 13:43:10 srv kernel: [ 6.153622] ACPI: PCI Interrupt 0000:00:07.3[D] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
May 10 13:43:10 srv kernel: [ 6.153641] uhci_hcd 0000:00:07.3: VIA VLink IRQ fixup, from 9 to 11
May 10 13:43:10 srv kernel: [ 6.153685] uhci_hcd 0000:00:07.3: UHCI Host Controller
May 10 13:43:10 srv kernel: [ 6.153795] uhci_hcd 0000:00:07.3: new USB bus registered, assigned bus number 2
May 10 13:43:10 srv kernel: [ 6.153843] uhci_hcd 0000:00:07.3: irq 11, io base 0x0000d800
May 10 13:43:10 srv kernel: [ 6.154102] usb usb2: configuration #1 chosen from 1 choice
May 10 13:43:10 srv kernel: [ 6.154184] hub 2-0:1.0: USB hub found
May 10 13:43:10 srv kernel: [ 6.154205] hub 2-0:1.0: 2 ports detected
May 10 13:43:10 srv kernel: [ 6.248488] hda: max request size: 128KiB
May 10 13:43:10 srv kernel: [ 6.249738] hda: 80418240 sectors (41174 MB) w/1863KiB Cache, CHS=65535/16/63
May 10 13:43:10 srv kernel: [ 6.251907] hda: cache flushes supported
May 10 13:43:10 srv kernel: [ 6.252127] hda:<6>usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
May 10 13:43:10 srv kernel: [ 6.256474] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
May 10 13:43:10 srv kernel: [ 6.256481] usb usb2: Product: UHCI Host Controller
May 10 13:43:10 srv kernel: [ 6.256486] usb usb2: Manufacturer: Linux 2.6.26-2-686 uhci_hcd
May 10 13:43:10 srv kernel: [ 6.256490] usb usb2: SerialNumber: 0000:00:07.3
May 10 13:43:10 srv kernel: [ 6.257960] ACPI: PCI Interrupt 0000:00:0d.0[A] -> GSI 17 (level, low) -> IRQ 17
May 10 13:43:10 srv kernel: [ 6.258820] eth0: RealTek RTL8139 at 0xec00, 00:20:ed:63:58:eb, IRQ 17
May 10 13:43:10 srv kernel: [ 6.271005] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
May 10 13:43:10 srv kernel: [ 6.272169] hda1 hda2 < hda5 >
May 10 13:43:10 srv kernel: [ 6.294605] hdb: max request size: 128KiB
May 10 13:43:10 srv kernel: [ 6.294850] hdb: 80043264 sectors (40982 MB) w/2048KiB Cache, CHS=65535/16/63
May 10 13:43:10 srv kernel: [ 6.294860] hdb: cache flushes not supported
May 10 13:43:10 srv kernel: [ 6.294940] hdb: [LDM] hdb1
May 10 13:43:10 srv kernel: [ 6.396690] hdc: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache
May 10 13:43:10 srv kernel: [ 6.396711] Uniform CD-ROM driver Revision: 3.20
May 10 13:43:10 srv kernel: [ 6.520206] usb 1-2: new low speed USB device using uhci_hcd and address 2
May 10 13:43:10 srv kernel: [ 6.687181] usb 1-2: configuration #1 chosen from 1 choice
May 10 13:43:10 srv kernel: [ 6.693325] usb 1-2: New USB device found, idVendor=15d9, idProduct=0a37
May 10 13:43:10 srv kernel: [ 6.693338] usb 1-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
May 10 13:43:10 srv kernel: [ 6.693343] usb 1-2: Product: USB Mouse
May 10 13:43:10 srv kernel: [ 6.948161] usbcore: registered new interface driver hiddev
May 10 13:43:10 srv kernel: [ 6.960913] input: USB Mouse as /class/input/input1
May 10 13:43:10 srv kernel: [ 6.960913] input,hidraw0: USB HID v1.10 Mouse [USB Mouse] on usb-0000:00:07.2-2
May 10 13:43:10 srv kernel: [ 6.960913] usbcore: registered new interface driver usbhid
May 10 13:43:10 srv kernel: [ 6.960913] usbhid: v2.6:USB HID core driver
May 10 13:43:10 srv kernel: [ 7.219257] PM: Starting manual resume from disk
May 10 13:43:10 srv kernel: [ 7.321707] kjournald starting. Commit interval 5 seconds
May 10 13:43:10 srv kernel: [ 7.321707] EXT3-fs: mounted filesystem with ordered data mode.
May 10 13:43:10 srv kernel: [ 9.493794] udevd version 125 started
May 10 13:43:10 srv kernel: [ 12.199603] Linux agpgart interface v0.103
May 10 13:43:10 srv kernel: [ 12.260211] agpgart: Detected VIA Apollo ProMedia/PLE133Ta chipset
May 10 13:43:10 srv kernel: [ 12.265704] agpgart: AGP aperture is 64M @ 0xe0000000
May 10 13:43:10 srv kernel: [ 12.311694] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
May 10 13:43:10 srv kernel: [ 12.374867] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
May 10 13:43:10 srv kernel: [ 12.548597] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
May 10 13:43:10 srv kernel: [ 12.645067] parport_pc: VIA parallel port: io=0x378, irq=7
May 10 13:43:10 srv kernel: [ 13.628428] input: Power Button (FF) as /class/input/input2
May 10 13:43:10 srv kernel: [ 13.660353] ACPI: Power Button (FF) [PWRF]
May 10 13:43:10 srv kernel: [ 13.660531] input: Power Button (CM) as /class/input/input3
May 10 13:43:10 srv kernel: [ 13.690503] ACPI: Power Button (CM) [PWRB]
May 10 13:43:10 srv kernel: [ 13.690700] input: Sleep Button (CM) as /class/input/input4
May 10 13:43:10 srv kernel: [ 13.722801] ACPI: Sleep Button (CM) [SLPB]
May 10 13:43:10 srv kernel: [ 14.308926] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10
May 10 13:43:10 srv kernel: [ 14.308956] ACPI: PCI Interrupt 0000:00:07.5[C] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
May 10 13:43:10 srv kernel: [ 14.308968] VIA 82xx Audio 0000:00:07.5: VIA VLink IRQ fixup, from 5 to 10
May 10 13:43:10 srv kernel: [ 14.730930] input: PC Speaker as /class/input/input5
May 10 13:43:10 srv kernel: [ 17.382495] Adding 1477940k swap on /dev/hda5. Priority:-1 extents:1 across:1477940k
May 10 13:43:10 srv kernel: [ 17.734250] EXT3 FS on hda1, internal journal
May 10 13:43:10 srv kernel: [ 18.228986] loop: module loaded
May 10 13:43:10 srv kernel: [ 20.365549] NET: Registered protocol family 10
May 10 13:43:10 srv kernel: [ 20.366646] lo: Disabled Privacy Extensions
May 10 13:43:10 srv kernel: [ 20.549134] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
May 10 13:43:10 srv rsyslogd: [origin software="rsyslogd" swVersion="3.18.6" x-pid="1995" x-info="http://www.rsyslog.com"] restart
May 10 13:43:17 srv kernel: [ 31.420577] lp0: using parport0 (interrupt-driven).
May 10 13:43:17 srv kernel: [ 31.474349] ppdev: user-space parallel port driver
May 10 13:43:22 srv dhcdbd: Started up.
May 10 13:43:22 srv kernel: [ 36.445155] warning: `ntpd' uses 32-bit capabilities (legacy support in use)
May 10 13:43:38 srv kernel: [ 52.156378] ip_tables: (C) 2000-2006 Netfilter Core Team
May 10 14:46:18 srv kernel: [ 3812.579150] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1

Was bräuchtest du denn?

[drcux]

Du hast doch den pureftp eingerichtet, also musst du auch wissen, wo hin der loggt...

[norreyy]

Da bekomm ich nur folgende Zeilen

srv:~# ls -lsa /var/log/pure-ftpd/
insgesamt 8
4 drwxr-xr-x 2 root root 4096 2. Nov 2008 .
4 drwxr-xr-x 17 root root 4096 10. Mai 14:54 ..
srv:~#

[drcux]

löppt der pureftpd denn wenigstens?

ps aux
netstat -tulpena

[norreyy]

Hier die ausgabe, schätze nicht wirklich das es lebt!
nebenbei, was bewirkt die Syntax "-tulpena"?


rv:~# ps aux
USER PID %CPU %MEM VSZ RSS TTY STAT START TIME COMMAND
root 1 0.0 0.1 2096 680 ? Ss 13:42 0:02 init [2]
root 2 0.0 0.0 0 0 ? S< 13:42 0:00 [kthreadd]
root 3 0.0 0.0 0 0 ? S< 13:42 0:00 [migration/0]
root 4 0.0 0.0 0 0 ? S< 13:42 0:00 [ksoftirqd/0]
root 5 0.0 0.0 0 0 ? S< 13:42 0:00 [watchdog/0]
root 6 0.0 0.0 0 0 ? S< 13:42 0:01 [events/0]
root 7 0.0 0.0 0 0 ? S< 13:42 0:00 [khelper]
root 39 0.0 0.0 0 0 ? S< 13:42 0:00 [kblockd/0]
root 41 0.0 0.0 0 0 ? S< 13:42 0:00 [kacpid]
root 42 0.0 0.0 0 0 ? S< 13:42 0:00 [kacpi_notify]
root 102 0.0 0.0 0 0 ? S< 13:42 0:00 [kseriod]
root 135 0.0 0.0 0 0 ? S 13:42 0:00 [pdflush]
root 136 0.0 0.0 0 0 ? S 13:42 0:00 [pdflush]
root 137 0.0 0.0 0 0 ? S< 13:42 0:00 [kswapd0]
root 138 0.0 0.0 0 0 ? S< 13:42 0:00 [aio/0]
root 577 0.0 0.0 0 0 ? S< 13:42 0:00 [ata/0]
root 578 0.0 0.0 0 0 ? S< 13:42 0:00 [ata_aux]
root 599 0.0 0.0 0 0 ? S< 13:42 0:00 [ksuspend_usbd]
root 600 0.0 0.0 0 0 ? S< 13:42 0:00 [khubd]
root 801 0.0 0.0 0 0 ? S< 13:42 0:01 [kjournald]
root 877 0.0 0.3 3084 1688 ? S<s 13:42 0:00 udevd --daemon
root 1266 0.0 0.0 0 0 ? S< 13:42 0:00 [kgameportd]
daemon 1718 0.0 0.0 1888 508 ? Ss 13:43 0:00 /sbin/portmap
statd 1729 0.0 0.1 1952 720 ? Ss 13:43 0:00 /sbin/rpc.statd
root 1947 0.0 0.0 0 0 ? S< 13:43 0:00 [kondemand/0]
root 1995 0.0 0.2 27400 1408 ? Sl 13:43 0:00 /usr/sbin/rsyslogd -c3
root 2006 0.0 0.1 1764 644 ? Ss 13:43 0:00 /usr/sbin/acpid
103 2016 0.0 0.1 2616 956 ? Ss 13:43 0:00 /usr/bin/dbus-daemon --system
avahi 2028 0.0 0.2 2976 1480 ? Ss 13:43 0:00 avahi-daemon: running [srv.local]
avahi 2029 0.0 0.0 2880 488 ? Ss 13:43 0:00 avahi-daemon: chroot helper
bind 2046 0.0 2.0 43180 10184 ? Ssl 13:43 0:00 /usr/sbin/named -u bind
root 2105 0.0 0.2 2824 1316 ? S 13:43 0:00 /bin/sh /usr/bin/mysqld_safe
mysql 2142 0.4 3.5 128640 18180 ? Sl 13:43 0:59 /usr/sbin/mysqld --basedir=/usr --datadir=/var/lib/mysql --us
root 2143 0.0 0.1 1748 540 ? S 13:43 0:00 logger -p daemon.err -t mysqld_safe -i -t mysqld
root 2218 0.0 0.4 6336 2164 ? Ss 13:43 0:00 /usr/sbin/cupsd
root 2236 0.0 0.1 6572 1008 ? Ss 13:43 0:00 /usr/sbin/kerneloops
root 2375 0.0 0.3 5616 1816 ? Ss 13:43 0:00 /usr/lib/postfix/master
ntp 2397 0.0 0.2 4272 1292 ? Ss 13:43 0:03 /usr/sbin/ntpd -p /var/run/ntpd.pid -u 109:116 -g
root 2406 0.0 0.1 2052 772 ? Ss 13:43 0:01 /usr/sbin/dhcdbd --system
root 2420 0.0 0.1 2132 616 ? Ss 13:43 0:00 /usr/sbin/dovecot
root 2422 0.0 0.4 9556 2440 ? S 13:43 0:00 dovecot-auth
106 2427 0.0 0.7 5920 3720 ? Ss 13:43 0:00 /usr/sbin/hald
root 2429 0.0 0.2 3320 1072 ? S 13:43 0:00 hald-runner
root 2453 0.0 0.2 3384 1036 ? S 13:43 0:00 hald-addon-input: Listening on /dev/input/event4 /dev/input/e
106 2461 0.0 0.1 2264 876 ? S 13:43 0:00 hald-addon-acpi: listening on acpid socket /var/run/acpid.soc
root 2469 0.0 0.2 3384 1040 ? S 13:43 0:05 hald-addon-storage: polling /dev/hdc (every 2 sec)
root 2477 0.0 0.3 4776 1968 ? Ss 13:43 0:00 /usr/sbin/NetworkManager --pid-file /var/run/NetworkManager/N
root 2485 0.0 0.2 3480 1176 ? Ss 13:43 0:00 /usr/sbin/NetworkManagerDispatcher --pid-file /var/run/Networ
root 2498 0.0 0.3 14256 1660 ? Ss 13:43 0:00 /usr/sbin/gdm
root 2504 0.0 0.5 14708 2700 ? S 13:43 0:00 /usr/sbin/gdm
root 2509 0.3 1.2 12256 6236 tty7 Ss+ 13:43 0:42 /usr/X11R6/bin/X :0 -audit 0 -auth /var/lib/gdm/:0.Xauth -nol
root 2511 0.0 0.2 3852 1024 ? Ss 13:43 0:00 /usr/bin/system-tools-backends
daemon 2531 0.0 0.0 2040 432 ? Ss 13:43 0:00 /usr/sbin/atd
root 2554 0.0 0.1 3448 984 ? Ss 13:43 0:00 /usr/sbin/cron
gdm 2590 0.4 5.3 39340 27356 ? Ss 13:43 0:59 /usr/lib/gdm/gdmgreeter
root 2600 0.0 0.9 24024 4616 ? Sl 13:43 0:12 /usr/bin/python /usr/bin/fail2ban-server -b -s /var/run/fail2
root 2629 0.0 0.0 1764 504 tty1 Ss+ 13:43 0:00 /sbin/getty 38400 tty1
root 2630 0.0 0.0 1764 508 tty2 Ss+ 13:43 0:00 /sbin/getty 38400 tty2
root 2633 0.0 0.0 1764 508 tty3 Ss+ 13:43 0:00 /sbin/getty 38400 tty3
root 2635 0.0 0.0 1764 508 tty4 Ss+ 13:43 0:00 /sbin/getty 38400 tty4
root 2637 0.0 0.0 1764 504 tty5 Ss+ 13:43 0:00 /sbin/getty 38400 tty5
root 2639 0.0 0.0 1764 508 tty6 Ss+ 13:43 0:00 /sbin/getty 38400 tty6
root 3864 0.0 0.1 5412 1016 ? Ss 14:46 0:00 /usr/sbin/sshd
postfix 3879 0.0 0.4 8020 2200 ? S 14:46 0:00 qmgr -l -t fifo -u
postfix 3931 0.0 0.5 6000 2600 ? S 14:50 0:00 tlsmgr -l -t unix -u -c
clamav 5801 0.0 0.3 12324 1588 ? Ss 14:54 0:01 /usr/bin/freshclam -d --quiet
clamav 6327 0.4 26.5 150212 134832 ? Ssl 14:55 0:38 /usr/sbin/clamd
amavis 6445 0.0 9.3 57316 47408 ? Ss 14:56 0:04 amavisd (master)
amavis 6449 0.0 9.1 58228 46520 ? S 14:56 0:00 amavisd (virgin child)
amavis 6450 0.0 9.1 58228 46496 ? S 14:56 0:00 amavisd (virgin child)
root 6508 0.0 1.8 31704 9564 ? Ss 14:57 0:01 /usr/sbin/apache2 -k start
root 6510 0.0 0.9 8052 4964 ? S 14:57 0:00 vlogger (access log)
www-data 6511 0.0 0.5 21032 2604 ? S 14:57 0:00 /usr/sbin/apache2 -k start
www-data 6512 0.0 1.6 32672 8188 ? S 14:57 0:00 /usr/sbin/apache2 -k start
www-data 6513 0.0 1.6 32636 8388 ? S 14:57 0:00 /usr/sbin/apache2 -k start
www-data 6514 0.0 1.6 32672 8380 ? S 14:57 0:00 /usr/sbin/apache2 -k start
www-data 6515 0.0 1.2 31784 6500 ? S 14:57 0:00 /usr/sbin/apache2 -k start
www-data 6516 0.0 1.5 32416 8108 ? S 14:57 0:00 /usr/sbin/apache2 -k start
www-data 6517 0.0 1.2 31784 6500 ? S 14:57 0:00 /usr/sbin/apache2 -k start
postfix 7721 0.0 0.3 5632 1732 ? S 16:25 0:00 pickup -l -t fifo -u -c
dovecot 8392 0.0 0.3 3624 1592 ? S 17:15 0:00 pop3-login
dovecot 8393 0.0 0.3 3628 1592 ? S 17:15 0:00 imap-login
dovecot 8457 0.0 0.3 3624 1588 ? S 17:20 0:00 pop3-login
dovecot 8458 0.0 0.3 3628 1596 ? S 17:20 0:00 imap-login
root 8483 0.1 0.5 8180 2700 ? Ss 17:24 0:00 sshd: root@pts/0
root 8485 0.0 0.3 4184 1628 pts/0 Rs 17:24 0:00 -bash
dovecot 8525 0.0 0.3 3624 1588 ? S 17:25 0:00 pop3-login
dovecot 8526 0.0 0.3 3628 1596 ? S 17:25 0:00 imap-login
root 8548 0.0 0.2 3712 1032 pts/0 R+ 17:28 0:00 ps aux


srv:~# netstat -tulpena
Aktive Internetverbindungen (Server und stehende Verbindungen)
Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name
tcp 0 0 0.0.0.0:993 0.0.0.0:* LISTEN 0 7357 2420/dovecot
tcp 0 0 0.0.0.0:995 0.0.0.0:* LISTEN 0 7359 2420/dovecot
tcp 0 0 127.0.0.1:10024 0.0.0.0:* LISTEN 115 19095 6445/amavisd (maste
tcp 0 0 127.0.0.1:10025 0.0.0.0:* LISTEN 0 7229 2375/master
tcp 0 0 0.0.0.0:3306 0.0.0.0:* LISTEN 110 6370 2142/mysqld
tcp 0 0 0.0.0.0:110 0.0.0.0:* LISTEN 0 7358 2420/dovecot
tcp 0 0 0.0.0.0:143 0.0.0.0:* LISTEN 0 7356 2420/dovecot
tcp 0 0 0.0.0.0:111 0.0.0.0:* LISTEN 0 5580 1718/portmap
tcp 0 0 0.0.0.0:58736 0.0.0.0:* LISTEN 0 5640 1729/rpc.statd
tcp 0 0 78.142.147.61:53 0.0.0.0:* LISTEN 113 6244 2046/named
tcp 0 0 127.0.0.1:53 0.0.0.0:* LISTEN 113 6242 2046/named
tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 0 12425 3864/sshd
tcp 0 0 127.0.0.1:631 0.0.0.0:* LISTEN 0 6574 2218/cupsd
tcp 0 0 0.0.0.0:25 0.0.0.0:* LISTEN 0 7092 2375/master
tcp 0 0 127.0.0.1:953 0.0.0.0:* LISTEN 113 6245 2046/named
tcp 0 332 78.142.147.61:22 84.114.238.39:1474 VERBUNDEN 0 26218 8483/0
tcp6 0 0 :::8080 :::* LISTEN 0 19647 6508/apache2
tcp6 0 0 :::80 :::* LISTEN 0 19632 6508/apache2
tcp6 0 0 :::8081 :::* LISTEN 0 19640 6508/apache2
tcp6 0 0 :::53 :::* LISTEN 113 6237 2046/named
tcp6 0 0 :::22 :::* LISTEN 0 12423 3864/sshd
tcp6 0 0 ::1:631 :::* LISTEN 0 6575 2218/cupsd
tcp6 0 0 ::1:953 :::* LISTEN 113 6246 2046/named
tcp6 0 0 :::443 :::* LISTEN 0 19636 6508/apache2
udp 0 0 0.0.0.0:60689 0.0.0.0:* 0 5637 1729/rpc.statd
udp 0 0 78.142.147.61:53 0.0.0.0:* 113 6243 2046/named
udp 0 0 127.0.0.1:53 0.0.0.0:* 113 6241 2046/named
udp 0 0 0.0.0.0:5353 0.0.0.0:* 104 6191 2028/avahi-daemon:
udp 0 0 0.0.0.0:37357 0.0.0.0:* 104 6193 2028/avahi-daemon:
udp 0 0 0.0.0.0:111 0.0.0.0:* 0 5577 1718/portmap
udp 0 0 0.0.0.0:631 0.0.0.0:* 0 6578 2218/cupsd
udp 0 0 0.0.0.0:633 0.0.0.0:* 0 5629 1729/rpc.statd
udp 0 0 78.142.147.61:123 0.0.0.0:* 0 7294 2397/ntpd
udp 0 0 127.0.0.1:123 0.0.0.0:* 0 7293 2397/ntpd
udp 0 0 0.0.0.0:123 0.0.0.0:* 0 7286 2397/ntpd
udp6 0 0 :::53043 :::* 104 6194 2028/avahi-daemon:
udp6 0 0 :::53 :::* 113 6236 2046/named
udp6 0 0 :::5353 :::* 104 6192 2028/avahi-daemon:
udp6 0 0 fe80::220:edff:fe63:123 :::* 0 7292 2397/ntpd
udp6 0 0 ::1:123 :::* 0 7291 2397/ntpd
udp6 0 0 :::123 :::* 0 7287 2397/ntpd

[norreyy]

Übrigens, der Server ist ein Dedicated und kein VServer, ist mein eigener mit einem Celeron Prozessor. Kann es damit zusamenhängen?

[norreyy]

Gut, das Thema hat sich erledigt. Hab alles neu Installiert und nun funktioniert es komischer weise. Obwohl ich alles genauso eingetippt habe (.bash_history verglichen!).
Naja, die Technik und ihre Tücken.

Danke für die Hilfe.

MfG
NY