TuxFan23
01.11.09, 16:02
Hallo Wissende, :)
ich habe lange bei Google gesucht, aber nicht wirklich eine Antwort gefunden. Bei mir auf dem Laptop laufen als Wirtsystem: Suse 11.1 und als Gast Ubuntu 9.04 . Als VM benutze ich Sun Virtualbox 3.0.10, die auch USB hat.
Nachdem ich meinen USB-Stick angesteckt habe, wird dieser auch ordnungsgemäß von Ubuntu (Gast) angezeigt. Ich kann den Stick auch anklicken und aktiviern und deaktivieren. Jedoch mein Problem ist, weiter passiert nichts. Ubuntu zeigt den Stick nirgends als Symbol an, so dass ich auf den Inhalt zugreifen könnte.
Wenn ich den Stick unter Suse benutze ist das alles kein Problem. Stick wird erkannt und ich kann auch auf den Inhalt zugreifen. Ich würde aber gerne auch in meiner VM Zugriff auf den Stick haben.
Folgende Ausgaben habe ich im Terminal des Gastes Ubuntu:
lsusb:
Bus 001 Device 003: ID 07b4:0215 Olympus Optical Co., Ltd
Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Mein Stick wird also auch erkannt, denn der Stcik ist von Olympus.
Folgende Ausgabe bei tail -f /var/log/messages:
Nov 1 15:49:37 TuxFan23-desktop kernel: [ 425.292120] usb 1-1: configuration #1 chosen from 1 choice
Nov 1 15:49:37 TuxFan23-desktop kernel: [ 425.349375] scsi3 : SCSI emulation for USB Mass Storage devices
Nov 1 15:49:48 TuxFan23-desktop kernel: [ 436.223916] usb 1-1: reset full speed USB device using ohci_hcd and address 3
Nov 1 15:49:59 TuxFan23-desktop kernel: [ 446.719408] usb 1-1: reset full speed USB device using ohci_hcd and address 3
Nov 1 15:50:15 TuxFan23-desktop kernel: [ 463.206091] usb 1-1: reset full speed USB device using ohci_hcd and address 3
Nov 1 15:50:16 TuxFan23-desktop kernel: [ 463.674781] usb 1-1: reset full speed USB device using ohci_hcd and address 3
Nov 1 15:50:26 TuxFan23-desktop kernel: [ 474.148215] usb 1-1: reset full speed USB device using ohci_hcd and address 3
Nov 1 15:50:26 TuxFan23-desktop kernel: [ 474.406465] scsi 3:0:0:0: Device offlined - not ready after error recovery
Nov 1 16:02:48 TuxFan23-desktop -- MARK --
Nov 1 16:22:48 TuxFan23-desktop -- MARK --
Irgendwie scheint da ein Fehler aufgetreten zu sein. Kann es daran liegen, dass Ubuntu den Stick nicht anzeigt, so dass ich dann auch nicht drauf zugreifen kann? Wie lässt sich dieser Fehler beheben?
Würde mich sehr über eine freuen, denn ich weiß nicht mehr weiter.
Folgende Ausgabe macht dmesg:
[ 0.000000] BIOS EBDA/lowmem at: 0009fc00/0009fc00
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.28-16-generic (buildd@vernadsky) (gcc version 4.3.3 (Ubuntu 4.3.3-5ubuntu4) ) #55-Ubuntu SMP Tue Oct 20 19:48:24 UTC 2009 (Ubuntu 2.6.28-16.55-generic)
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 0000000018df0000 (usable)
[ 0.000000] BIOS-e820: 0000000018df0000 - 0000000018e00000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000fffc0000 - 0000000100000000 (reserved)
[ 0.000000] DMI 2.5 present.
[ 0.000000] last_pfn = 0x18df0 max_arch_pfn = 0x100000
[ 0.000000] CPU MTRRs all blank - virtualized system.
[ 0.000000] Scanning 2 areas for low memory corruption
[ 0.000000] modified physical RAM map:
[ 0.000000] modified: 0000000000000000 - 0000000000002000 (usable)
[ 0.000000] modified: 0000000000002000 - 0000000000006000 (reserved)
[ 0.000000] modified: 0000000000006000 - 0000000000007000 (usable)
[ 0.000000] modified: 0000000000007000 - 0000000000010000 (reserved)
[ 0.000000] modified: 0000000000010000 - 0000000000092c00 (usable)
[ 0.000000] modified: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] modified: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] modified: 0000000000100000 - 0000000018df0000 (usable)
[ 0.000000] modified: 0000000018df0000 - 0000000018e00000 (ACPI data)
[ 0.000000] modified: 00000000fffc0000 - 0000000100000000 (reserved)
[ 0.000000] kernel direct mapping tables up to 18df0000 @ 10000-16000
[ 0.000000] RAMDISK: 186a9000 - 18ddf74e
[ 0.000000] ACPI: RSDP 000E0000, 0024 (r2 VBOX )
[ 0.000000] ACPI: XSDT 18DF0030, 002C (r1 VBOX VBOXXSDT 1 ASL 61)
[ 0.000000] ACPI: FACP 18DF00E0, 00F4 (r4 VBOX VBOXFACP 1 ASL 61)
[ 0.000000] ACPI: DSDT 18DF0220, 1A0C (r1 VBOX VBOXBIOS 2 INTL 20081031)
[ 0.000000] ACPI: FACS 18DF01E0, 0040
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 397MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 18df0000
[ 0.000000] low ram: 00000000 - 18df0000
[ 0.000000] bootmap 00012000 - 000151c0
[ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 0018df0000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
[ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
[ 0.000000] #3 [0000100000 - 00008780ac] TEXT DATA BSS ==> [0000100000 - 00008780ac]
[ 0.000000] #4 [00186a9000 - 0018ddf74e] RAMDISK ==> [00186a9000 - 0018ddf74e]
[ 0.000000] #5 [0000879000 - 000087d000] INIT_PG_TABLE ==> [0000879000 - 000087d000]
[ 0.000000] #6 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000]
[ 0.000000] #7 [0000010000 - 0000012000] PGTABLE ==> [0000010000 - 0000012000]
[ 0.000000] #8 [0000012000 - 0000016000] BOOTMAP ==> [0000012000 - 0000016000]
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x00018df0
[ 0.000000] HighMem 0x00018df0 -> 0x00018df0
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[4] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x00000002
[ 0.000000] 0: 0x00000006 -> 0x00000007
[ 0.000000] 0: 0x00000010 -> 0x00000092
[ 0.000000] 0: 0x00000100 -> 0x00018df0
[ 0.000000] On node 0 totalpages: 101749
[ 0.000000] free_area_init_node: node 0, pgdat c06cb780, node_mem_map c1000000
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3941 pages, LIFO batch:0
[ 0.000000] Normal zone: 764 pages used for memmap
[ 0.000000] Normal zone: 97012 pages, LIFO batch:31
[ 0.000000] HighMem zone: 0 pages used for memmap
[ 0.000000] Movable zone: 0 pages used for memmap
[ 0.000000] ACPI: PM-Timer IO Port: 0x4008
[ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
[ 0.000000] Found and enabled local APIC!
[ 0.000000] PM: Registered nosave memory: 0000000000002000 - 0000000000006000
[ 0.000000] PM: Registered nosave memory: 0000000000007000 - 0000000000010000
[ 0.000000] PM: Registered nosave memory: 0000000000092000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 20000000 (gap: 18e00000:e71c0000)
[ 0.000000] PERCPU: Allocating 45056 bytes of per cpu data
[ 0.000000] NR_CPUS: 64, nr_cpu_ids: 1, nr_node_ids 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 100953
[ 0.000000] Kernel command line: root=UUID=94fb83a2-79bf-4124-91bf-b77d0c726a7e ro quiet splash
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 2048 (order: 11, 8192 bytes)
[ 0.000000] TSC: Unable to calibrate against PIT
[ 0.000000] TSC: using PMTIMER reference calibration
[ 0.000000] Detected 2191.726 MHz processor.
[ 0.004000] Console: colour VGA+ 80x25
[ 0.004000] console [tty0] enabled
[ 0.004000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.004000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.004000] allocated 2037440 bytes of page_cgroup
[ 0.004000] please try cgroup_disable=memory option if you don't want
[ 0.004000] Scanning for low memory corruption every 60 seconds
[ 0.004000] Memory: 386040k/407488k available (4116k kernel code, 20740k reserved, 2199k data, 532k init, 0k highmem)
[ 0.004000] virtual kernel memory layout:
[ 0.004000] fixmap : 0xffc77000 - 0xfffff000 (3616 kB)
[ 0.004000] pkmap : 0xff400000 - 0xff800000 (4096 kB)
[ 0.004000] vmalloc : 0xd95f0000 - 0xff3fe000 ( 606 MB)
[ 0.004000] lowmem : 0xc0000000 - 0xd8df0000 ( 397 MB)
[ 0.004000] .init : 0xc0733000 - 0xc07b8000 ( 532 kB)
[ 0.004000] .data : 0xc050520d - 0xc072ae60 (2199 kB)
[ 0.004000] .text : 0xc0100000 - 0xc050520d (4116 kB)
[ 0.004000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.004000] SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.004010] Calibrating delay loop (skipped), value calculated using timer frequency.. 4383.45 BogoMIPS (lpj=8766904)
[ 0.004024] Security Framework initialized
[ 0.004038] SELinux: Disabled at boot.
[ 0.004058] AppArmor: AppArmor initialized
[ 0.004069] Mount-cache hash table entries: 512
[ 0.007201] Initializing cgroup subsys ns
[ 0.007212] Initializing cgroup subsys cpuacct
[ 0.007214] Initializing cgroup subsys memory
[ 0.007217] Initializing cgroup subsys freezer
[ 0.007277]
[ 0.007286] using mwait in idle threads.
[ 0.007304] Checking 'hlt' instruction... OK.
[ 0.028006] SMP alternatives: switching to UP code
[ 0.206271] Freeing SMP alternatives: 18k freed
[ 0.206274] ACPI: Core revision 20080926
[ 0.206302] ACPI: Checking initramfs for custom DSDT
[ 0.452395] ACPI: setting ELCR to 0200 (from 0e20)
[ 0.452790] weird, boot CPU (#0) not listedby the BIOS.
[ 0.452840] SMP motherboard not detected.
[ 0.456001] SMP disabled
[ 0.456001] Brought up 1 CPUs
[ 0.456001] Total of 1 processors activated (4383.45 BogoMIPS).
[ 0.456001] CPU0 attaching NULL sched-domain.
[ 0.456001] net_namespace: 776 bytes
[ 0.456001] Booting paravirtualized kernel on bare hardware
[ 0.456001] Time: 15:42:10 Date: 11/01/09
[ 0.456001] regulator: core version 0.5
[ 0.456001] NET: Registered protocol family 16
[ 0.456001] EISA bus registered
[ 0.456001] ACPI: bus type pci registered
[ 0.456001] PCI: PCI BIOS revision 2.10 entry at 0xfc080, last bus=0
[ 0.456001] PCI: Using configuration type 1 for base access
[ 0.456001] ACPI: EC: Look up EC in DSDT
[ 0.457911] ACPI: Interpreter enabled
[ 0.457915] ACPI: (supports S0 S5)
[ 0.457922] ACPI: Using PIC for interrupt routing
[ 0.461369] ACPI: No dock devices found.
[ 0.461377] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.462427] pci 0000:00:01.1: reg 20 io port: [0xd000-0xd00f]
[ 0.463247] pci 0000:00:02.0: reg 10 32bit mmio: [0xe0000000-0xe0ffffff]
[ 0.463638] pci 0000:00:03.0: reg 10 io port: [0xd020-0xd03f]
[ 0.463696] pci 0000:00:03.0: reg 14 32bit mmio: [0xf0000000-0xf0000fff]
[ 0.463749] pci 0000:00:03.0: reg 18 32bit mmio: [0xf0080000-0xf00fffff]
[ 0.464098] pci 0000:00:04.0: reg 10 io port: [0xd040-0xd05f]
[ 0.464172] pci 0000:00:04.0: reg 14 32bit mmio: [0xf0400000-0xf07fffff]
[ 0.464237] pci 0000:00:04.0: reg 18 32bit mmio: [0xf0800000-0xf0803fff]
[ 0.464543] pci 0000:00:05.0: reg 10 io port: [0xd100-0xd1ff]
[ 0.464586] pci 0000:00:05.0: reg 14 io port: [0xd200-0xd23f]
[ 0.464937] pci 0000:00:06.0: reg 10 32bit mmio: [0xf0804000-0xf0804fff]
[ 0.465836] bus 00 -> node 0
[ 0.465842] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.469349] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *9 10 11)
[ 0.469603] ACPI: PCI Interrupt Link [LNKB] (IRQs *5 9 10 11)
[ 0.469691] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 9 10 *11)
[ 0.469778] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 9 *10 11)
[ 0.469880] ACPI: WMI: Mapper loaded
[ 0.470040] SCSI subsystem initialized
[ 0.470068] libata version 3.00 loaded.
[ 0.470103] usbcore: registered new interface driver usbfs
[ 0.470116] usbcore: registered new interface driver hub
[ 0.470135] usbcore: registered new device driver usb
[ 0.470220] PCI: Using ACPI for IRQ routing
[ 0.470439] Bluetooth: Core ver 2.13
[ 0.470439] NET: Registered protocol family 31
[ 0.470439] Bluetooth: HCI device and connection manager initialized
[ 0.470439] Bluetooth: HCI socket layer initialized
[ 0.470439] NET: Registered protocol family 8
[ 0.470439] NET: Registered protocol family 20
[ 0.470439] NetLabel: Initializing
[ 0.470439] NetLabel: domain hash size = 128
[ 0.470439] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.470439] NetLabel: unlabeled traffic allowed by default
[ 0.470439] AppArmor: AppArmor Filesystem Enabled
[ 0.470439] pnp: PnP ACPI init
[ 0.470439] ACPI: bus type pnp registered
[ 0.470439] pnp: PnP ACPI: found 6 devices
[ 0.470439] ACPI: ACPI bus type pnp unregistered
[ 0.470439] PnPBIOS: Disabled by ACPI PNP
[ 0.505938] bus: 00 index 0 io port: [0x00-0xffff]
[ 0.505940] bus: 00 index 1 mmio: [0x000000-0xffffffff]
[ 0.505947] NET: Registered protocol family 2
[ 0.506027] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.506167] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.506212] TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.506258] TCP: Hash tables configured (established 16384 bind 16384)
[ 0.506260] TCP reno registered
[ 0.506308] NET: Registered protocol family 1
[ 0.506402] checking if image is initramfs... it is
[ 1.007469] Switched to high resolution mode on CPU 0
[ 1.029917] Freeing initrd memory: 7385k freed
[ 1.029993] platform rtc_cmos: registered platform RTC device (no PNP device found)
[ 1.030001] cpufreq: No nForce2 chipset.
[ 1.030069] audit: initializing netlink socket (disabled)
[ 1.030085] type=2000 audit(1257090130.028:1): initialized
[ 1.036550] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 1.037384] VFS: Disk quotas dquot_6.5.1
[ 1.037426] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.037906] fuse init (API version 7.10)
[ 1.037967] msgmni has been set to 768
[ 1.038105] alg: No test for stdrng (krng)
[ 1.038115] io scheduler noop registered
[ 1.038116] io scheduler anticipatory registered
[ 1.038118] io scheduler deadline registered
[ 1.038129] io scheduler cfq registered (default)
[ 1.038137] pci 0000:00:00.0: Limiting direct PCI/PCI transfers
[ 1.038151] pci 0000:00:01.0: Activating ISA DMA hang workarounds
[ 1.038164] pci 0000:00:02.0: Boot video device
[ 1.039654] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.039661] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.039867] ACPI: AC Adapter [AC] (on-line)
[ 1.039960] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 1.039968] ACPI: Power Button (FF) [PWRF]
[ 1.040079] input: Sleep Button (FF) as /devices/LNXSYSTM:00/LNXSLPBN:00/input/input1
[ 1.040081] ACPI: Sleep Button (FF) [SLPF]
[ 1.040794] isapnp: Scanning for PnP cards...
[ 1.406984] isapnp: No Plug & Play device found
[ 1.407863] Serial: 8250/16550 driver4 ports, IRQ sharing enabled
[ 1.408356] brd: module loaded
[ 1.408570] loop: module loaded
[ 1.408621] Fixed MDIO Bus: probed
[ 1.408626] PPP generic driver version 2.4.2
[ 1.408676] input: Macintosh mouse button emulation as /devices/virtual/input/input2
[ 1.408696] Driver 'sd' needs updating - please use bus_type methods
[ 1.408703] Driver 'sr' needs updating - please use bus_type methods
[ 1.408753] ata_piix 0000:00:01.1: version 2.12
[ 1.408801] ata_piix 0000:00:01.1: setting latency timer to 64
[ 1.408900] scsi0 : ata_piix
[ 1.408968] scsi1 : ata_piix
[ 1.409003] ata1: PATA max UDMA/33 cmd 0x1f0 ctl 0x3f6 bmdma 0xd000 irq 14
[ 1.409007] ata2: PATA max UDMA/33 cmd 0x170 ctl 0x376 bmdma 0xd008 irq 15
[ 1.565136] ata1.00: ATA-6: VBOX HARDDISK, 1.0, max UDMA/133
[ 1.565143] ata1.00: 16777216 sectors, multi 128: LBA
[ 1.566509] ata1.00: configured for UDMA/33
[ 1.722256] ata2.00: ATAPI: VBOX CD-ROM, 1.0, max UDMA/133
[ 1.723496] ata2.00: configured for UDMA/33
[ 1.724305] scsi 0:0:0:0: Direct-Access ATA VBOX HARDDISK 1.0 PQ: 0 ANSI: 5
[ 1.724528] sd 0:0:0:0: [sda] 16777216 512-byte hardware sectors: (8.58 GB/8.00 GiB)
[ 1.724564] sd 0:0:0:0: [sda] Write Protect is off
[ 1.724570] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.724626] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.724753] sd 0:0:0:0: [sda] 16777216 512-byte hardware sectors: (8.58 GB/8.00 GiB)
[ 1.724786] sd 0:0:0:0: [sda] Write Protect is off
[ 1.724791] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.724845] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.724853] sda: sda1 sda2 < sda5 >
[ 1.726175] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.726501] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.727259] scsi 1:0:0:0: CD-ROM VBOX CD-ROM 1.0 PQ: 0 ANSI: 5
[ 1.731439] sr0: scsi3-mmc drive: 32x/32x xa/form2 tray
[ 1.731447] Uniform CD-ROM driver Revision: 3.20
[ 1.731667] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 1.731752] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 1.732886] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.732916] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.733575] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 5
[ 1.733608] PCI: setting IRQ 5 as level-triggered
[ 1.733657] ohci_hcd 0000:00:06.0: PCI INT A -> Link[LNKB] -> GSI 5 (level, low) -> IRQ 5
[ 1.733854] ohci_hcd 0000:00:06.0: setting latency timer to 64
[ 1.733911] ohci_hcd 0000:00:06.0: OHCI Host Controller
[ 1.734055] ohci_hcd 0000:00:06.0: new USB bus registered, assigned bus number 1
[ 1.734361] ohci_hcd 0000:00:06.0: irq 5, io mem 0xf0804000
[ 1.790199] usb usb1: configuration #1 chosen from 1 choice
[ 1.790261] hub 1-0:1.0: USB hub found
[ 1.790373] hub 1-0:1.0: 8 ports detected
[ 1.791566] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.791726] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[ 1.792875] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.792889] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.793151] mice: PS/2 mouse device common for all mice
[ 1.793691] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
[ 1.793807] rtc0: alarms up to one day, 114 bytes nvram
[ 1.793933] device-mapper: uevent: version 1.0.3
[ 1.795765] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[ 1.795917] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
[ 1.796022] device-mapper: multipath: version 1.0.5 loaded
[ 1.796028] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 1.796181] EISA: Probing bus 0 at eisa.0
[ 1.796293] Cannot allocate resource for EISA slot 4
[ 1.796381] EISA: Detected 0 cards.
[ 1.796437] cpuidle: using governor ladder
[ 1.796442] cpuidle: using governor menu
[ 1.797541] TCP cubic registered
[ 1.797770] NET: Registered protocol family 10
[ 1.798521] lo: Disabled Privacy Extensions
[ 1.799153] NET: Registered protocol family 17
[ 1.799191] Bluetooth: L2CAP ver 2.11
[ 1.799195] Bluetooth: L2CAP socket layer initialized
[ 1.799201] Bluetooth: SCO (Voice Link) ver 0.6
[ 1.799205] Bluetooth: SCO socket layer initialized
[ 1.799254] Bluetooth: RFCOMM socket layer initialized
[ 1.799283] Bluetooth: RFCOMM TTY layer initialized
[ 1.799293] Bluetooth: RFCOMM ver 1.10
[ 1.799352] IO APIC resources could be not be allocated.
[ 1.800919] Using IPI No-Shortcut mode
[ 1.801070] registered taskstats version 1
[ 1.801205] Magic number: 1:380:739
[ 1.801479] rtc_cmos rtc_cmos: setting system clock to 2009-11-01 15:42:11 UTC (1257090131)
[ 1.801487] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.801491] EDD information not available.
[ 1.801896] Freeing unused kernel memory: 532k freed
[ 1.824936] Write protecting the kernel text: 4120k
[ 1.833248] Write protecting the kernel read-only data: 1524k
[ 2.235164] usb 1-1: new full speed USB device using ohci_hcd and address 2
[ 2.685608] usb 1-1: configuration #1 chosen from 1 choice
[ 3.185718] Floppy drive(s): fd0 is 1.44M
[ 3.201159] FDC 0 is a S82078B
[ 3.519645] pcnet32.c:v1.35 21.Apr.2008 tsbogend@alpha.franken.de
[ 3.520128] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
[ 3.520130] PCI: setting IRQ 11 as level-triggered
[ 3.520138] pcnet32 0000:00:03.0: PCI INT A -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11
[ 3.520162] pcnet32 0000:00:03.0: setting latency timer to 64
[ 3.520212] pcnet32: PCnet/FAST III 79C973 at 0xd020, 08:00:27:78:6d:7f assigned IRQ 11.
[ 3.520320] pcnet32: Found PHY 0022:561b at address 0.
[ 3.521167] eth0: registered as PCnet/FAST III 79C973
[ 3.521195] pcnet32: 1 cards_found.
[ 3.610924] Initializing USB Mass Storage driver...
[ 3.619892] scsi2 : SCSI emulation for USB Mass Storage devices
[ 3.629085] usbcore: registered new interface driver usb-storage
[ 3.629094] USB Mass Storage support registered.
[ 3.630735] usb-storage: device found at 2
[ 3.630737] usb-storage: waiting for device to settle before scanning
[ 5.694578] PM: Starting manual resume from disk
[ 5.694582] PM: Resume from partition 8:5
[ 5.694583] PM: Checking hibernation image.
[ 5.694782] PM: Resume from disk failed.
[ 5.705395] kjournald starting. Commit interval 5 seconds
[ 5.705408] EXT3-fs: mounted filesystem with ordered data mode.
[ 6.999568] udev: starting version 141
[ 7.301264] parport_pc 00:05: reported by Plug and Play ACPI
[ 7.687471] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 10
[ 7.687475] PCI: setting IRQ 10 as level-triggered
[ 7.687482] pci 0000:00:04.0: PCI INT A -> Link[LNKD] -> GSI 10 (level, low) -> IRQ 10
[ 7.689264] vboxadd: Successfully loaded version 3.0.10 (interface 0x00010004)
[ 7.941288] piix4_smbus 0000:00:07.0: SMBus base address uninitialized - upgrade BIOS or use force_addr=0xaddr
[ 7.954913] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 9
[ 7.954936] PCI: setting IRQ 9 as level-triggered
[ 7.954960] Intel ICH 0000:00:05.0: PCI INT A -> Link[LNKA] -> GSI 9 (level, low) -> IRQ 9
[ 7.955010] Intel ICH 0000:00:05.0: setting latency timer to 64
[ 8.053570] synaptics was reset on resume, see synaptics_resume_reset if you have trouble on resume
[ 8.054960] psmouse serio1: ID: 10 00 64<6>input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input4
[ 8.073324] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 8.218052] Control name 'Sigmatel Surround Phase Inversion Playback Switch' truncated to 'Sigmatel Surround Phase Inversion Playback '
[ 8.272157] intel8x0_measure_ac97_clock: measured 53666 usecs
[ 8.272160] intel8x0: measured clock 174654 rejected
[ 8.272162] intel8x0: clocking to 48000
[ 8.662133] usb-storage: device scan complete
[ 9.622847] ppdev: user-space parallel port driver
[ 10.374407] lp: driver loaded but no devices found
[ 10.812850] Adding 409616k swap on /dev/sda5. Priority:-1 extents:1 across:409616k
[ 11.626201] EXT3 FS on sda1, internal journal
[ 13.734733] type=1505 audit(1257090143.430:2): operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" name2="default" pid=1735
[ 13.802495] type=1505 audit(1257090143.499:3): operation="profile_load" name="/sbin/dhclient-script" name2="default" pid=1739
[ 13.803588] type=1505 audit(1257090143.499:4): operation="profile_load" name="/sbin/dhclient3" name2="default" pid=1739
[ 13.803693] type=1505 audit(1257090143.499:5): operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" name2="default" pid=1739
[ 13.803802] type=1505 audit(1257090143.499:6): operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" name2="default" pid=1739
[ 13.962090] type=1505 audit(1257090143.658:7): operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" name2="default" pid=1744
[ 13.962650] type=1505 audit(1257090143.658:8): operation="profile_load" name="/usr/sbin/cupsd" name2="default" pid=1744
[ 14.016586] type=1505 audit(1257090143.714:9): operation="profile_load" name="/usr/sbin/tcpdump" name2="default" pid=1748
[ 15.052121] usb 1-1: reset full speed USB device using ohci_hcd and address 2
[ 15.261572] vboxvfs: Successfully loaded version 3.0.10 (interface 0x00010004)
[ 17.887089] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 17.887092] Bluetooth: BNEP filters: protocol multicast
[ 17.923578] Bridge firewalling registered
[ 19.101632] Linux agpgart interface v0.103
[ 19.124451] [drm] Initialized drm 1.1.0 20060810
[ 19.151962] pci 0000:00:02.0: setting latency timer to 64
[ 19.152022] [drm] Initialized vboxvideo 1.0.0 20090303 on minor 0
[ 23.163035] eth0: link up, 100Mbps, full-duplex
[ 25.629023] usb 1-1: reset full speed USB device using ohci_hcd and address 2
[ 33.301194] eth0: no IPv6 routers present
[ 42.160102] usb 1-1: reset full speed USB device using ohci_hcd and address 2
[ 42.636091] usb 1-1: reset full speed USB device using ohci_hcd and address 2
[ 44.122958] UDF-fs: No VRS found
[ 44.125725] ISO 9660 Extensions: Microsoft Joliet Level 3
[ 44.126190] ISO 9660 Extensions: RRIP_1991A
[ 53.134012] usb 1-1: reset full speed USB device using ohci_hcd and address 2
[ 53.393939] scsi 2:0:0:0: Device offlined - not ready after error recovery
[ 376.468105] usb 1-1: USB disconnect, address 2
[ 425.005277] usb 1-1: new full speed USB device using ohci_hcd and address 3
[ 425.292120] usb 1-1: configuration #1 chosen from 1 choice
[ 425.349375] scsi3 : SCSI emulation for USB Mass Storage devices
[ 425.354514] usb-storage: device found at 3
[ 425.354516] usb-storage: waiting for device to settle before scanning
[ 430.367549] usb-storage: device scan complete
[ 436.223916] usb 1-1: reset full speed USB device using ohci_hcd and address 3
[ 446.719408] usb 1-1: reset full speed USB device using ohci_hcd and address 3
[ 463.206091] usb 1-1: reset full speed USB device using ohci_hcd and address 3
[ 463.674781] usb 1-1: reset full speed USB device using ohci_hcd and address 3
[ 474.148215] usb 1-1: reset full speed USB device using ohci_hcd and address 3
[ 474.406465] scsi 3:0:0:0: Device offlined - not ready after error recovery
Schon mal vielen Dank im Voraus für Tipps, die mich dem Ziel von USB in der VM näher bringen. TuxFan23
ich habe lange bei Google gesucht, aber nicht wirklich eine Antwort gefunden. Bei mir auf dem Laptop laufen als Wirtsystem: Suse 11.1 und als Gast Ubuntu 9.04 . Als VM benutze ich Sun Virtualbox 3.0.10, die auch USB hat.
Nachdem ich meinen USB-Stick angesteckt habe, wird dieser auch ordnungsgemäß von Ubuntu (Gast) angezeigt. Ich kann den Stick auch anklicken und aktiviern und deaktivieren. Jedoch mein Problem ist, weiter passiert nichts. Ubuntu zeigt den Stick nirgends als Symbol an, so dass ich auf den Inhalt zugreifen könnte.
Wenn ich den Stick unter Suse benutze ist das alles kein Problem. Stick wird erkannt und ich kann auch auf den Inhalt zugreifen. Ich würde aber gerne auch in meiner VM Zugriff auf den Stick haben.
Folgende Ausgaben habe ich im Terminal des Gastes Ubuntu:
lsusb:
Bus 001 Device 003: ID 07b4:0215 Olympus Optical Co., Ltd
Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Mein Stick wird also auch erkannt, denn der Stcik ist von Olympus.
Folgende Ausgabe bei tail -f /var/log/messages:
Nov 1 15:49:37 TuxFan23-desktop kernel: [ 425.292120] usb 1-1: configuration #1 chosen from 1 choice
Nov 1 15:49:37 TuxFan23-desktop kernel: [ 425.349375] scsi3 : SCSI emulation for USB Mass Storage devices
Nov 1 15:49:48 TuxFan23-desktop kernel: [ 436.223916] usb 1-1: reset full speed USB device using ohci_hcd and address 3
Nov 1 15:49:59 TuxFan23-desktop kernel: [ 446.719408] usb 1-1: reset full speed USB device using ohci_hcd and address 3
Nov 1 15:50:15 TuxFan23-desktop kernel: [ 463.206091] usb 1-1: reset full speed USB device using ohci_hcd and address 3
Nov 1 15:50:16 TuxFan23-desktop kernel: [ 463.674781] usb 1-1: reset full speed USB device using ohci_hcd and address 3
Nov 1 15:50:26 TuxFan23-desktop kernel: [ 474.148215] usb 1-1: reset full speed USB device using ohci_hcd and address 3
Nov 1 15:50:26 TuxFan23-desktop kernel: [ 474.406465] scsi 3:0:0:0: Device offlined - not ready after error recovery
Nov 1 16:02:48 TuxFan23-desktop -- MARK --
Nov 1 16:22:48 TuxFan23-desktop -- MARK --
Irgendwie scheint da ein Fehler aufgetreten zu sein. Kann es daran liegen, dass Ubuntu den Stick nicht anzeigt, so dass ich dann auch nicht drauf zugreifen kann? Wie lässt sich dieser Fehler beheben?
Würde mich sehr über eine freuen, denn ich weiß nicht mehr weiter.
Folgende Ausgabe macht dmesg:
[ 0.000000] BIOS EBDA/lowmem at: 0009fc00/0009fc00
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.28-16-generic (buildd@vernadsky) (gcc version 4.3.3 (Ubuntu 4.3.3-5ubuntu4) ) #55-Ubuntu SMP Tue Oct 20 19:48:24 UTC 2009 (Ubuntu 2.6.28-16.55-generic)
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 0000000018df0000 (usable)
[ 0.000000] BIOS-e820: 0000000018df0000 - 0000000018e00000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000fffc0000 - 0000000100000000 (reserved)
[ 0.000000] DMI 2.5 present.
[ 0.000000] last_pfn = 0x18df0 max_arch_pfn = 0x100000
[ 0.000000] CPU MTRRs all blank - virtualized system.
[ 0.000000] Scanning 2 areas for low memory corruption
[ 0.000000] modified physical RAM map:
[ 0.000000] modified: 0000000000000000 - 0000000000002000 (usable)
[ 0.000000] modified: 0000000000002000 - 0000000000006000 (reserved)
[ 0.000000] modified: 0000000000006000 - 0000000000007000 (usable)
[ 0.000000] modified: 0000000000007000 - 0000000000010000 (reserved)
[ 0.000000] modified: 0000000000010000 - 0000000000092c00 (usable)
[ 0.000000] modified: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] modified: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] modified: 0000000000100000 - 0000000018df0000 (usable)
[ 0.000000] modified: 0000000018df0000 - 0000000018e00000 (ACPI data)
[ 0.000000] modified: 00000000fffc0000 - 0000000100000000 (reserved)
[ 0.000000] kernel direct mapping tables up to 18df0000 @ 10000-16000
[ 0.000000] RAMDISK: 186a9000 - 18ddf74e
[ 0.000000] ACPI: RSDP 000E0000, 0024 (r2 VBOX )
[ 0.000000] ACPI: XSDT 18DF0030, 002C (r1 VBOX VBOXXSDT 1 ASL 61)
[ 0.000000] ACPI: FACP 18DF00E0, 00F4 (r4 VBOX VBOXFACP 1 ASL 61)
[ 0.000000] ACPI: DSDT 18DF0220, 1A0C (r1 VBOX VBOXBIOS 2 INTL 20081031)
[ 0.000000] ACPI: FACS 18DF01E0, 0040
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 397MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 18df0000
[ 0.000000] low ram: 00000000 - 18df0000
[ 0.000000] bootmap 00012000 - 000151c0
[ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 0018df0000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
[ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
[ 0.000000] #3 [0000100000 - 00008780ac] TEXT DATA BSS ==> [0000100000 - 00008780ac]
[ 0.000000] #4 [00186a9000 - 0018ddf74e] RAMDISK ==> [00186a9000 - 0018ddf74e]
[ 0.000000] #5 [0000879000 - 000087d000] INIT_PG_TABLE ==> [0000879000 - 000087d000]
[ 0.000000] #6 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000]
[ 0.000000] #7 [0000010000 - 0000012000] PGTABLE ==> [0000010000 - 0000012000]
[ 0.000000] #8 [0000012000 - 0000016000] BOOTMAP ==> [0000012000 - 0000016000]
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x00018df0
[ 0.000000] HighMem 0x00018df0 -> 0x00018df0
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[4] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x00000002
[ 0.000000] 0: 0x00000006 -> 0x00000007
[ 0.000000] 0: 0x00000010 -> 0x00000092
[ 0.000000] 0: 0x00000100 -> 0x00018df0
[ 0.000000] On node 0 totalpages: 101749
[ 0.000000] free_area_init_node: node 0, pgdat c06cb780, node_mem_map c1000000
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3941 pages, LIFO batch:0
[ 0.000000] Normal zone: 764 pages used for memmap
[ 0.000000] Normal zone: 97012 pages, LIFO batch:31
[ 0.000000] HighMem zone: 0 pages used for memmap
[ 0.000000] Movable zone: 0 pages used for memmap
[ 0.000000] ACPI: PM-Timer IO Port: 0x4008
[ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
[ 0.000000] Found and enabled local APIC!
[ 0.000000] PM: Registered nosave memory: 0000000000002000 - 0000000000006000
[ 0.000000] PM: Registered nosave memory: 0000000000007000 - 0000000000010000
[ 0.000000] PM: Registered nosave memory: 0000000000092000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 20000000 (gap: 18e00000:e71c0000)
[ 0.000000] PERCPU: Allocating 45056 bytes of per cpu data
[ 0.000000] NR_CPUS: 64, nr_cpu_ids: 1, nr_node_ids 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 100953
[ 0.000000] Kernel command line: root=UUID=94fb83a2-79bf-4124-91bf-b77d0c726a7e ro quiet splash
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 2048 (order: 11, 8192 bytes)
[ 0.000000] TSC: Unable to calibrate against PIT
[ 0.000000] TSC: using PMTIMER reference calibration
[ 0.000000] Detected 2191.726 MHz processor.
[ 0.004000] Console: colour VGA+ 80x25
[ 0.004000] console [tty0] enabled
[ 0.004000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.004000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.004000] allocated 2037440 bytes of page_cgroup
[ 0.004000] please try cgroup_disable=memory option if you don't want
[ 0.004000] Scanning for low memory corruption every 60 seconds
[ 0.004000] Memory: 386040k/407488k available (4116k kernel code, 20740k reserved, 2199k data, 532k init, 0k highmem)
[ 0.004000] virtual kernel memory layout:
[ 0.004000] fixmap : 0xffc77000 - 0xfffff000 (3616 kB)
[ 0.004000] pkmap : 0xff400000 - 0xff800000 (4096 kB)
[ 0.004000] vmalloc : 0xd95f0000 - 0xff3fe000 ( 606 MB)
[ 0.004000] lowmem : 0xc0000000 - 0xd8df0000 ( 397 MB)
[ 0.004000] .init : 0xc0733000 - 0xc07b8000 ( 532 kB)
[ 0.004000] .data : 0xc050520d - 0xc072ae60 (2199 kB)
[ 0.004000] .text : 0xc0100000 - 0xc050520d (4116 kB)
[ 0.004000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.004000] SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.004010] Calibrating delay loop (skipped), value calculated using timer frequency.. 4383.45 BogoMIPS (lpj=8766904)
[ 0.004024] Security Framework initialized
[ 0.004038] SELinux: Disabled at boot.
[ 0.004058] AppArmor: AppArmor initialized
[ 0.004069] Mount-cache hash table entries: 512
[ 0.007201] Initializing cgroup subsys ns
[ 0.007212] Initializing cgroup subsys cpuacct
[ 0.007214] Initializing cgroup subsys memory
[ 0.007217] Initializing cgroup subsys freezer
[ 0.007277]
[ 0.007286] using mwait in idle threads.
[ 0.007304] Checking 'hlt' instruction... OK.
[ 0.028006] SMP alternatives: switching to UP code
[ 0.206271] Freeing SMP alternatives: 18k freed
[ 0.206274] ACPI: Core revision 20080926
[ 0.206302] ACPI: Checking initramfs for custom DSDT
[ 0.452395] ACPI: setting ELCR to 0200 (from 0e20)
[ 0.452790] weird, boot CPU (#0) not listedby the BIOS.
[ 0.452840] SMP motherboard not detected.
[ 0.456001] SMP disabled
[ 0.456001] Brought up 1 CPUs
[ 0.456001] Total of 1 processors activated (4383.45 BogoMIPS).
[ 0.456001] CPU0 attaching NULL sched-domain.
[ 0.456001] net_namespace: 776 bytes
[ 0.456001] Booting paravirtualized kernel on bare hardware
[ 0.456001] Time: 15:42:10 Date: 11/01/09
[ 0.456001] regulator: core version 0.5
[ 0.456001] NET: Registered protocol family 16
[ 0.456001] EISA bus registered
[ 0.456001] ACPI: bus type pci registered
[ 0.456001] PCI: PCI BIOS revision 2.10 entry at 0xfc080, last bus=0
[ 0.456001] PCI: Using configuration type 1 for base access
[ 0.456001] ACPI: EC: Look up EC in DSDT
[ 0.457911] ACPI: Interpreter enabled
[ 0.457915] ACPI: (supports S0 S5)
[ 0.457922] ACPI: Using PIC for interrupt routing
[ 0.461369] ACPI: No dock devices found.
[ 0.461377] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.462427] pci 0000:00:01.1: reg 20 io port: [0xd000-0xd00f]
[ 0.463247] pci 0000:00:02.0: reg 10 32bit mmio: [0xe0000000-0xe0ffffff]
[ 0.463638] pci 0000:00:03.0: reg 10 io port: [0xd020-0xd03f]
[ 0.463696] pci 0000:00:03.0: reg 14 32bit mmio: [0xf0000000-0xf0000fff]
[ 0.463749] pci 0000:00:03.0: reg 18 32bit mmio: [0xf0080000-0xf00fffff]
[ 0.464098] pci 0000:00:04.0: reg 10 io port: [0xd040-0xd05f]
[ 0.464172] pci 0000:00:04.0: reg 14 32bit mmio: [0xf0400000-0xf07fffff]
[ 0.464237] pci 0000:00:04.0: reg 18 32bit mmio: [0xf0800000-0xf0803fff]
[ 0.464543] pci 0000:00:05.0: reg 10 io port: [0xd100-0xd1ff]
[ 0.464586] pci 0000:00:05.0: reg 14 io port: [0xd200-0xd23f]
[ 0.464937] pci 0000:00:06.0: reg 10 32bit mmio: [0xf0804000-0xf0804fff]
[ 0.465836] bus 00 -> node 0
[ 0.465842] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.469349] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *9 10 11)
[ 0.469603] ACPI: PCI Interrupt Link [LNKB] (IRQs *5 9 10 11)
[ 0.469691] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 9 10 *11)
[ 0.469778] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 9 *10 11)
[ 0.469880] ACPI: WMI: Mapper loaded
[ 0.470040] SCSI subsystem initialized
[ 0.470068] libata version 3.00 loaded.
[ 0.470103] usbcore: registered new interface driver usbfs
[ 0.470116] usbcore: registered new interface driver hub
[ 0.470135] usbcore: registered new device driver usb
[ 0.470220] PCI: Using ACPI for IRQ routing
[ 0.470439] Bluetooth: Core ver 2.13
[ 0.470439] NET: Registered protocol family 31
[ 0.470439] Bluetooth: HCI device and connection manager initialized
[ 0.470439] Bluetooth: HCI socket layer initialized
[ 0.470439] NET: Registered protocol family 8
[ 0.470439] NET: Registered protocol family 20
[ 0.470439] NetLabel: Initializing
[ 0.470439] NetLabel: domain hash size = 128
[ 0.470439] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.470439] NetLabel: unlabeled traffic allowed by default
[ 0.470439] AppArmor: AppArmor Filesystem Enabled
[ 0.470439] pnp: PnP ACPI init
[ 0.470439] ACPI: bus type pnp registered
[ 0.470439] pnp: PnP ACPI: found 6 devices
[ 0.470439] ACPI: ACPI bus type pnp unregistered
[ 0.470439] PnPBIOS: Disabled by ACPI PNP
[ 0.505938] bus: 00 index 0 io port: [0x00-0xffff]
[ 0.505940] bus: 00 index 1 mmio: [0x000000-0xffffffff]
[ 0.505947] NET: Registered protocol family 2
[ 0.506027] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.506167] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.506212] TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.506258] TCP: Hash tables configured (established 16384 bind 16384)
[ 0.506260] TCP reno registered
[ 0.506308] NET: Registered protocol family 1
[ 0.506402] checking if image is initramfs... it is
[ 1.007469] Switched to high resolution mode on CPU 0
[ 1.029917] Freeing initrd memory: 7385k freed
[ 1.029993] platform rtc_cmos: registered platform RTC device (no PNP device found)
[ 1.030001] cpufreq: No nForce2 chipset.
[ 1.030069] audit: initializing netlink socket (disabled)
[ 1.030085] type=2000 audit(1257090130.028:1): initialized
[ 1.036550] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 1.037384] VFS: Disk quotas dquot_6.5.1
[ 1.037426] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.037906] fuse init (API version 7.10)
[ 1.037967] msgmni has been set to 768
[ 1.038105] alg: No test for stdrng (krng)
[ 1.038115] io scheduler noop registered
[ 1.038116] io scheduler anticipatory registered
[ 1.038118] io scheduler deadline registered
[ 1.038129] io scheduler cfq registered (default)
[ 1.038137] pci 0000:00:00.0: Limiting direct PCI/PCI transfers
[ 1.038151] pci 0000:00:01.0: Activating ISA DMA hang workarounds
[ 1.038164] pci 0000:00:02.0: Boot video device
[ 1.039654] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.039661] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.039867] ACPI: AC Adapter [AC] (on-line)
[ 1.039960] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 1.039968] ACPI: Power Button (FF) [PWRF]
[ 1.040079] input: Sleep Button (FF) as /devices/LNXSYSTM:00/LNXSLPBN:00/input/input1
[ 1.040081] ACPI: Sleep Button (FF) [SLPF]
[ 1.040794] isapnp: Scanning for PnP cards...
[ 1.406984] isapnp: No Plug & Play device found
[ 1.407863] Serial: 8250/16550 driver4 ports, IRQ sharing enabled
[ 1.408356] brd: module loaded
[ 1.408570] loop: module loaded
[ 1.408621] Fixed MDIO Bus: probed
[ 1.408626] PPP generic driver version 2.4.2
[ 1.408676] input: Macintosh mouse button emulation as /devices/virtual/input/input2
[ 1.408696] Driver 'sd' needs updating - please use bus_type methods
[ 1.408703] Driver 'sr' needs updating - please use bus_type methods
[ 1.408753] ata_piix 0000:00:01.1: version 2.12
[ 1.408801] ata_piix 0000:00:01.1: setting latency timer to 64
[ 1.408900] scsi0 : ata_piix
[ 1.408968] scsi1 : ata_piix
[ 1.409003] ata1: PATA max UDMA/33 cmd 0x1f0 ctl 0x3f6 bmdma 0xd000 irq 14
[ 1.409007] ata2: PATA max UDMA/33 cmd 0x170 ctl 0x376 bmdma 0xd008 irq 15
[ 1.565136] ata1.00: ATA-6: VBOX HARDDISK, 1.0, max UDMA/133
[ 1.565143] ata1.00: 16777216 sectors, multi 128: LBA
[ 1.566509] ata1.00: configured for UDMA/33
[ 1.722256] ata2.00: ATAPI: VBOX CD-ROM, 1.0, max UDMA/133
[ 1.723496] ata2.00: configured for UDMA/33
[ 1.724305] scsi 0:0:0:0: Direct-Access ATA VBOX HARDDISK 1.0 PQ: 0 ANSI: 5
[ 1.724528] sd 0:0:0:0: [sda] 16777216 512-byte hardware sectors: (8.58 GB/8.00 GiB)
[ 1.724564] sd 0:0:0:0: [sda] Write Protect is off
[ 1.724570] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.724626] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.724753] sd 0:0:0:0: [sda] 16777216 512-byte hardware sectors: (8.58 GB/8.00 GiB)
[ 1.724786] sd 0:0:0:0: [sda] Write Protect is off
[ 1.724791] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.724845] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.724853] sda: sda1 sda2 < sda5 >
[ 1.726175] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.726501] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.727259] scsi 1:0:0:0: CD-ROM VBOX CD-ROM 1.0 PQ: 0 ANSI: 5
[ 1.731439] sr0: scsi3-mmc drive: 32x/32x xa/form2 tray
[ 1.731447] Uniform CD-ROM driver Revision: 3.20
[ 1.731667] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 1.731752] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 1.732886] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.732916] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.733575] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 5
[ 1.733608] PCI: setting IRQ 5 as level-triggered
[ 1.733657] ohci_hcd 0000:00:06.0: PCI INT A -> Link[LNKB] -> GSI 5 (level, low) -> IRQ 5
[ 1.733854] ohci_hcd 0000:00:06.0: setting latency timer to 64
[ 1.733911] ohci_hcd 0000:00:06.0: OHCI Host Controller
[ 1.734055] ohci_hcd 0000:00:06.0: new USB bus registered, assigned bus number 1
[ 1.734361] ohci_hcd 0000:00:06.0: irq 5, io mem 0xf0804000
[ 1.790199] usb usb1: configuration #1 chosen from 1 choice
[ 1.790261] hub 1-0:1.0: USB hub found
[ 1.790373] hub 1-0:1.0: 8 ports detected
[ 1.791566] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.791726] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[ 1.792875] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.792889] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.793151] mice: PS/2 mouse device common for all mice
[ 1.793691] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
[ 1.793807] rtc0: alarms up to one day, 114 bytes nvram
[ 1.793933] device-mapper: uevent: version 1.0.3
[ 1.795765] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[ 1.795917] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
[ 1.796022] device-mapper: multipath: version 1.0.5 loaded
[ 1.796028] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 1.796181] EISA: Probing bus 0 at eisa.0
[ 1.796293] Cannot allocate resource for EISA slot 4
[ 1.796381] EISA: Detected 0 cards.
[ 1.796437] cpuidle: using governor ladder
[ 1.796442] cpuidle: using governor menu
[ 1.797541] TCP cubic registered
[ 1.797770] NET: Registered protocol family 10
[ 1.798521] lo: Disabled Privacy Extensions
[ 1.799153] NET: Registered protocol family 17
[ 1.799191] Bluetooth: L2CAP ver 2.11
[ 1.799195] Bluetooth: L2CAP socket layer initialized
[ 1.799201] Bluetooth: SCO (Voice Link) ver 0.6
[ 1.799205] Bluetooth: SCO socket layer initialized
[ 1.799254] Bluetooth: RFCOMM socket layer initialized
[ 1.799283] Bluetooth: RFCOMM TTY layer initialized
[ 1.799293] Bluetooth: RFCOMM ver 1.10
[ 1.799352] IO APIC resources could be not be allocated.
[ 1.800919] Using IPI No-Shortcut mode
[ 1.801070] registered taskstats version 1
[ 1.801205] Magic number: 1:380:739
[ 1.801479] rtc_cmos rtc_cmos: setting system clock to 2009-11-01 15:42:11 UTC (1257090131)
[ 1.801487] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.801491] EDD information not available.
[ 1.801896] Freeing unused kernel memory: 532k freed
[ 1.824936] Write protecting the kernel text: 4120k
[ 1.833248] Write protecting the kernel read-only data: 1524k
[ 2.235164] usb 1-1: new full speed USB device using ohci_hcd and address 2
[ 2.685608] usb 1-1: configuration #1 chosen from 1 choice
[ 3.185718] Floppy drive(s): fd0 is 1.44M
[ 3.201159] FDC 0 is a S82078B
[ 3.519645] pcnet32.c:v1.35 21.Apr.2008 tsbogend@alpha.franken.de
[ 3.520128] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
[ 3.520130] PCI: setting IRQ 11 as level-triggered
[ 3.520138] pcnet32 0000:00:03.0: PCI INT A -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11
[ 3.520162] pcnet32 0000:00:03.0: setting latency timer to 64
[ 3.520212] pcnet32: PCnet/FAST III 79C973 at 0xd020, 08:00:27:78:6d:7f assigned IRQ 11.
[ 3.520320] pcnet32: Found PHY 0022:561b at address 0.
[ 3.521167] eth0: registered as PCnet/FAST III 79C973
[ 3.521195] pcnet32: 1 cards_found.
[ 3.610924] Initializing USB Mass Storage driver...
[ 3.619892] scsi2 : SCSI emulation for USB Mass Storage devices
[ 3.629085] usbcore: registered new interface driver usb-storage
[ 3.629094] USB Mass Storage support registered.
[ 3.630735] usb-storage: device found at 2
[ 3.630737] usb-storage: waiting for device to settle before scanning
[ 5.694578] PM: Starting manual resume from disk
[ 5.694582] PM: Resume from partition 8:5
[ 5.694583] PM: Checking hibernation image.
[ 5.694782] PM: Resume from disk failed.
[ 5.705395] kjournald starting. Commit interval 5 seconds
[ 5.705408] EXT3-fs: mounted filesystem with ordered data mode.
[ 6.999568] udev: starting version 141
[ 7.301264] parport_pc 00:05: reported by Plug and Play ACPI
[ 7.687471] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 10
[ 7.687475] PCI: setting IRQ 10 as level-triggered
[ 7.687482] pci 0000:00:04.0: PCI INT A -> Link[LNKD] -> GSI 10 (level, low) -> IRQ 10
[ 7.689264] vboxadd: Successfully loaded version 3.0.10 (interface 0x00010004)
[ 7.941288] piix4_smbus 0000:00:07.0: SMBus base address uninitialized - upgrade BIOS or use force_addr=0xaddr
[ 7.954913] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 9
[ 7.954936] PCI: setting IRQ 9 as level-triggered
[ 7.954960] Intel ICH 0000:00:05.0: PCI INT A -> Link[LNKA] -> GSI 9 (level, low) -> IRQ 9
[ 7.955010] Intel ICH 0000:00:05.0: setting latency timer to 64
[ 8.053570] synaptics was reset on resume, see synaptics_resume_reset if you have trouble on resume
[ 8.054960] psmouse serio1: ID: 10 00 64<6>input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input4
[ 8.073324] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 8.218052] Control name 'Sigmatel Surround Phase Inversion Playback Switch' truncated to 'Sigmatel Surround Phase Inversion Playback '
[ 8.272157] intel8x0_measure_ac97_clock: measured 53666 usecs
[ 8.272160] intel8x0: measured clock 174654 rejected
[ 8.272162] intel8x0: clocking to 48000
[ 8.662133] usb-storage: device scan complete
[ 9.622847] ppdev: user-space parallel port driver
[ 10.374407] lp: driver loaded but no devices found
[ 10.812850] Adding 409616k swap on /dev/sda5. Priority:-1 extents:1 across:409616k
[ 11.626201] EXT3 FS on sda1, internal journal
[ 13.734733] type=1505 audit(1257090143.430:2): operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" name2="default" pid=1735
[ 13.802495] type=1505 audit(1257090143.499:3): operation="profile_load" name="/sbin/dhclient-script" name2="default" pid=1739
[ 13.803588] type=1505 audit(1257090143.499:4): operation="profile_load" name="/sbin/dhclient3" name2="default" pid=1739
[ 13.803693] type=1505 audit(1257090143.499:5): operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" name2="default" pid=1739
[ 13.803802] type=1505 audit(1257090143.499:6): operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" name2="default" pid=1739
[ 13.962090] type=1505 audit(1257090143.658:7): operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" name2="default" pid=1744
[ 13.962650] type=1505 audit(1257090143.658:8): operation="profile_load" name="/usr/sbin/cupsd" name2="default" pid=1744
[ 14.016586] type=1505 audit(1257090143.714:9): operation="profile_load" name="/usr/sbin/tcpdump" name2="default" pid=1748
[ 15.052121] usb 1-1: reset full speed USB device using ohci_hcd and address 2
[ 15.261572] vboxvfs: Successfully loaded version 3.0.10 (interface 0x00010004)
[ 17.887089] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 17.887092] Bluetooth: BNEP filters: protocol multicast
[ 17.923578] Bridge firewalling registered
[ 19.101632] Linux agpgart interface v0.103
[ 19.124451] [drm] Initialized drm 1.1.0 20060810
[ 19.151962] pci 0000:00:02.0: setting latency timer to 64
[ 19.152022] [drm] Initialized vboxvideo 1.0.0 20090303 on minor 0
[ 23.163035] eth0: link up, 100Mbps, full-duplex
[ 25.629023] usb 1-1: reset full speed USB device using ohci_hcd and address 2
[ 33.301194] eth0: no IPv6 routers present
[ 42.160102] usb 1-1: reset full speed USB device using ohci_hcd and address 2
[ 42.636091] usb 1-1: reset full speed USB device using ohci_hcd and address 2
[ 44.122958] UDF-fs: No VRS found
[ 44.125725] ISO 9660 Extensions: Microsoft Joliet Level 3
[ 44.126190] ISO 9660 Extensions: RRIP_1991A
[ 53.134012] usb 1-1: reset full speed USB device using ohci_hcd and address 2
[ 53.393939] scsi 2:0:0:0: Device offlined - not ready after error recovery
[ 376.468105] usb 1-1: USB disconnect, address 2
[ 425.005277] usb 1-1: new full speed USB device using ohci_hcd and address 3
[ 425.292120] usb 1-1: configuration #1 chosen from 1 choice
[ 425.349375] scsi3 : SCSI emulation for USB Mass Storage devices
[ 425.354514] usb-storage: device found at 3
[ 425.354516] usb-storage: waiting for device to settle before scanning
[ 430.367549] usb-storage: device scan complete
[ 436.223916] usb 1-1: reset full speed USB device using ohci_hcd and address 3
[ 446.719408] usb 1-1: reset full speed USB device using ohci_hcd and address 3
[ 463.206091] usb 1-1: reset full speed USB device using ohci_hcd and address 3
[ 463.674781] usb 1-1: reset full speed USB device using ohci_hcd and address 3
[ 474.148215] usb 1-1: reset full speed USB device using ohci_hcd and address 3
[ 474.406465] scsi 3:0:0:0: Device offlined - not ready after error recovery
Schon mal vielen Dank im Voraus für Tipps, die mich dem Ziel von USB in der VM näher bringen. TuxFan23