mr.lover
28.10.09, 17:27
Hallo zusammen,
nach dem ich mal das Problem mit driftfile gelöst habe, tja hab jetzt wieder ein problemchen und zwar mit dem "kernel time sync error 0001"
28 Oct 15:00:26 ntpd[11932]: synchronized to LOCAL(0), stratum 10
28 Oct 15:00:26 ntpd[11932]: kernel time sync status change 0001
28 Oct 15:01:29 ntpd[11932]: synchronized to 85.214.36.108, stratum 2
28 Oct 15:18:40 ntpd[11932]: synchronized to 78.46.194.187, stratum 2
28 Oct 15:31:38 ntpd[11932]: synchronized to 78.46.194.188, stratum 2
28 Oct 15:37:01 ntpd[11932]: synchronized to 78.46.194.187, stratum 2
28 Oct 15:46:27 ntpd[11932]: synchronized to 85.214.36.108, stratum 2
28 Oct 16:56:26 ntpd[11932]: synchronized to 78.46.194.188, stratum 2
28 Oct 16:56:26 ntpd[11932]: kernel time sync error 0001
28 Oct 17:15:51 ntpd[11932]: synchronized to 85.214.36.108, stratum 2
28 Oct 17:43:30 ntpd[11932]: kernel time sync error 0001
die conf sieht jetzt so aus
server 127.127.1.0
# Local clock (LCL)
fudge 127.127.1.0 stratum 10
# LCL is unsynchronized
server 0.pool.ntp.org # von da holl er die uhrzeit
server 1.pool.ntp.org
server 2.pool.ntp.org
server 172.21.0.35 # Lokale Uhr, falls alles anderes ausfällt
restrict 0.pool.ntp.org
restrict 1.pool.ntp.org
restrict 2.pool.ntp.org
restrict 172.21.0.35
driftfile /var/lib/ntp/drift/ntp.drift
enable monitor
#im driftfile wird die errechnete drift der maschine gesichert so das diese nicht bei jeden neustart berechnet werden muss.
#monitor aktiviren
logfile /var/log/ntp
restrict 172.21.0.0 mask 255.255.0.0
restrict 172.22.0.0 mask 255.255.0.0
restrict default notrust nomodify nopeer
ich weiss nicht wo das Problem liegt.
Hab mal restrict default notrust nomodify nopeer weg gelassen, nichts.
Den enable monitor weg gelassen, nichts.
Fehlt da was noch in der ntp.conf??
Unter Yast ist die Uhr auf local umgestellt und nicht per UTC......
:(:(
mfg
danijel
nach dem ich mal das Problem mit driftfile gelöst habe, tja hab jetzt wieder ein problemchen und zwar mit dem "kernel time sync error 0001"
28 Oct 15:00:26 ntpd[11932]: synchronized to LOCAL(0), stratum 10
28 Oct 15:00:26 ntpd[11932]: kernel time sync status change 0001
28 Oct 15:01:29 ntpd[11932]: synchronized to 85.214.36.108, stratum 2
28 Oct 15:18:40 ntpd[11932]: synchronized to 78.46.194.187, stratum 2
28 Oct 15:31:38 ntpd[11932]: synchronized to 78.46.194.188, stratum 2
28 Oct 15:37:01 ntpd[11932]: synchronized to 78.46.194.187, stratum 2
28 Oct 15:46:27 ntpd[11932]: synchronized to 85.214.36.108, stratum 2
28 Oct 16:56:26 ntpd[11932]: synchronized to 78.46.194.188, stratum 2
28 Oct 16:56:26 ntpd[11932]: kernel time sync error 0001
28 Oct 17:15:51 ntpd[11932]: synchronized to 85.214.36.108, stratum 2
28 Oct 17:43:30 ntpd[11932]: kernel time sync error 0001
die conf sieht jetzt so aus
server 127.127.1.0
# Local clock (LCL)
fudge 127.127.1.0 stratum 10
# LCL is unsynchronized
server 0.pool.ntp.org # von da holl er die uhrzeit
server 1.pool.ntp.org
server 2.pool.ntp.org
server 172.21.0.35 # Lokale Uhr, falls alles anderes ausfällt
restrict 0.pool.ntp.org
restrict 1.pool.ntp.org
restrict 2.pool.ntp.org
restrict 172.21.0.35
driftfile /var/lib/ntp/drift/ntp.drift
enable monitor
#im driftfile wird die errechnete drift der maschine gesichert so das diese nicht bei jeden neustart berechnet werden muss.
#monitor aktiviren
logfile /var/log/ntp
restrict 172.21.0.0 mask 255.255.0.0
restrict 172.22.0.0 mask 255.255.0.0
restrict default notrust nomodify nopeer
ich weiss nicht wo das Problem liegt.
Hab mal restrict default notrust nomodify nopeer weg gelassen, nichts.
Den enable monitor weg gelassen, nichts.
Fehlt da was noch in der ntp.conf??
Unter Yast ist die Uhr auf local umgestellt und nicht per UTC......
:(:(
mfg
danijel