Problem mit sound modul suse 11.1

[anthraxx84]

Schönen Guten Tag allerseits.

Hab wieder mal ein kleines Problem unter suse11.1 / Gnome

und zwar kommt immer mal wieder ne meldung dass das Sound gerät nicht funktioniert und daher auf ein anderes ausgewichen wird. das dann aber nicht funktioniert
Wortlaut: Phonon das Multimedia-System von KDE:
Das Audio-abspielgerät "HDA ATI SB (AL C885 Analog) funtioniert nicht.
Es wird auf "HDA ATI HDMI, ATI HDMI (HDMI Audio Output) ausgewichen

Und ab und zu hab ich unter DragonPlayer keinen sound. wenn ich dann den film mit vlc öffne, wieder schliesse, dann geht er wieder im Dragon


und seit neuestem geht im firefox kein sound bei flash videos. da kommt nur rauschen.

In yast sind bei mir 2 soundkarten angegeben. einmal Radeon x1200 series adop controller und als zweites SBx00 Azalia (intel hda) hab aber nur eine soundkarte.


wär cool wenn ihr helfen könntet.

Das ist die ausgabe von lsmod

Module Size Used by
ip6t_LOG 6212 8
xt_tcpudp 2728 8
xt_pkttype 1560 3
ipt_LOG 5708 9
xt_limit 2056 17
binfmt_misc 7740 1
snd_pcm_oss 43132 0
snd_mixer_oss 14288 1 snd_pcm_oss
snd_seq 51920 0
snd_seq_device 7168 1 snd_seq
af_packet 16412 0
radeon 131568 2
drm 74644 3 radeon
ip6t_REJECT 4984 3
nf_conntrack_ipv6 20108 4
ip6table_raw 1792 1
xt_NOTRACK 1544 4
ipt_REJECT 2760 3
xt_state 1904 8
iptable_raw 2056 1
iptable_filter 2548 1
ip6table_mangle 2288 0
nf_conntrack_netbios_ns 2152 0
nf_conntrack_ipv4 10480 4
nf_conntrack 67360 5 nf_conntrack_ipv6,xt_NOTRACK,xt_state,nf_conntrack _netbios_ns,nf_conntrack_ipv4
ip_tables 11364 2 iptable_raw,iptable_filter
ip6table_filter 2408 1
ip6_tables 12596 4 ip6t_LOG,ip6table_raw,ip6table_mangle,ip6table_fil ter
x_tables 14500 11 ip6t_LOG,xt_tcpudp,xt_pkttype,ipt_LOG,xt_limit,ip6 t_REJECT,xt_NOTRACK,ipt_REJECT,xt_state,ip_tables, ip6_tables
ipv6 242000 29 ip6t_REJECT,nf_conntrack_ipv6,ip6table_mangle
cpufreq_conservative 6476 0
cpufreq_userspace 3112 0
cpufreq_powersave 1640 0
powernow_k8 12896 0
fuse 50596 5
loop 14064 0
dm_mod 62608 0
ppdev 6876 0
rtc_cmos 10896 0
rtc_core 17384 1 rtc_cmos
rtc_lib 2816 1 rtc_core
parport_pc 35032 0
r8169 27992 0
ohci1394 27652 0
parport 33128 2 ppdev,parport_pc
floppy 52940 0
mii 4968 1 r8169
ieee1394 83764 1 ohci1394
snd_hda_intel 433092 5
snd_pcm 77012 3 snd_pcm_oss,snd_hda_intel
snd_timer 20204 2 snd_seq,snd_pcm
snd_page_alloc 8184 2 snd_hda_intel,snd_pcm
shpchp 28296 0
button 6568 0
snd_hwdep 7160 1 snd_hda_intel
sr_mod 13360 0
pci_hotplug 27392 1 shpchp
cdrom 32288 1 sr_mod
k8temp 4000 0
i2c_piix4 10116 0
ati_agp 6652 0
pcspkr 2344 0
serio_raw 5096 0
snd 56800 17 snd_pcm_oss,snd_mixer_oss,snd_seq,snd_seq_device,s nd_hda_intel,snd_pcm,snd_timer,snd_hwdep
i2c_core 29892 1 i2c_piix4
agpgart 32308 2 drm,ati_agp
joydev 8944 0
soundcore 6660 1 snd
sg 29408 0
usbhid 45620 0
hid 35568 1 usbhid
ff_memless 7132 1 usbhid
ohci_hcd 30992 0
ehci_hcd 48184 0
usbcore 165892 4 usbhid,ohci_hcd,ehci_hcd
sd_mod 31624 5
crc_t10dif 1704 1 sd_mod
edd 8620 0
ext3 124056 2
mbcache 7592 1 ext3
jbd 52884 1 ext3
fan 4720 0
ide_pci_generic 3428 0
atiixp 3384 0
ide_core 97492 2 ide_pci_generic,atiixp
ata_generic 4484 0
pata_atiixp 4560 0
ahci 28520 4
libata 161216 3 ata_generic,pata_atiixp,ahci
scsi_mod 149856 4 sr_mod,sg,sd_mod,libata
dock 11844 1 libata
thermal 19976 0
processor 43784 2 powernow_k8,thermal
thermal_sys 11376 3 fan,thermal,processor
hwmon 2916 2 k8temp,thermal_sys


danke euch schonmal

[tomfa b68]

Fehlt nicht noch was? Zum Beispiel Verweise zu den/ dem anderen Foren/ Forum, wo die Frage auch schon gestellt wurde. Die Benutzung der CODE-Tags hat auch noch niemandem geschadet.

[Rain_maker]

http://www.linux-forum.de/problem-mit-sound-modul-31309.html

Lesen und verstehen:

http://www.linux-club.de/viewtopic.php?f=38&t=76935

//Edit:

@tomfa

*g* 2 Dumme ....

[tomfa b68]

*g* 2 Dumme ....
Mit dem Gedanken kommt ja hin, aber 2 Dumme? Wenn dann nur einer.
(Ich hoffe es verstehen alle und es kommt nicht falsch rüber.)
Zum Thema:
Und egal in welchem Forum, gibt noch andere Befehle um informative Informationen abzurufen. Nur die Ausgabe von lsmod dürfte nicht reichen. /sbin/lspci -nnk und hwinfo mit entsprechender Option im Anhang wären zwei Kandidaten. Nur um noch etwas zum Topic beizutragen.

[anthraxx84]

stimmt, ja ich habs unter www.linux-forum.de schon gepostet, da es da niemanden interessiert hat oder keiner helfen konnte, bin ich wo anders hin um hilfe zu suchen.

danke tomfa b68
die ausgabe:
linux-q2n5:/sbin # lspci -nnk
00:00.0 Host bridge [0600]: ATI Technologies Inc RS690 Host Bridge [1002:7910]
Kernel modules: ati-agp
00:01.0 PCI bridge [0604]: ATI Technologies Inc RS690 PCI to PCI Bridge (Internal gfx) [1002:7912]
Kernel modules: shpchp
00:12.0 SATA controller [0106]: ATI Technologies Inc SB600 Non-Raid-5 SATA [1002:4380]
Kernel driver in use: ahci
Kernel modules: ahci
00:13.0 USB Controller [0c03]: ATI Technologies Inc SB600 USB (OHCI0) [1002:4387]
Kernel driver in use: ohci_hcd
Kernel modules: ohci-hcd
00:13.1 USB Controller [0c03]: ATI Technologies Inc SB600 USB (OHCI1) [1002:4388]
Kernel driver in use: ohci_hcd
Kernel modules: ohci-hcd
00:13.2 USB Controller [0c03]: ATI Technologies Inc SB600 USB (OHCI2) [1002:4389]
Kernel driver in use: ohci_hcd
Kernel modules: ohci-hcd
00:13.3 USB Controller [0c03]: ATI Technologies Inc SB600 USB (OHCI3) [1002:438a]
Kernel driver in use: ohci_hcd
Kernel modules: ohci-hcd
00:13.4 USB Controller [0c03]: ATI Technologies Inc SB600 USB (OHCI4) [1002:438b]
Kernel driver in use: ohci_hcd
Kernel modules: ohci-hcd
00:13.5 USB Controller [0c03]: ATI Technologies Inc SB600 USB Controller (EHCI) [1002:4386]
Kernel driver in use: ehci_hcd
Kernel modules: ehci-hcd
00:14.0 SMBus [0c05]: ATI Technologies Inc SBx00 SMBus Controller [1002:4385] (rev 14)
Kernel driver in use: piix4_smbus
Kernel modules: i2c-piix4
00:14.1 IDE interface [0101]: ATI Technologies Inc SB600 IDE [1002:438c]
Kernel driver in use: pata_atiixp
Kernel modules: atiixp, pata_atiixp
00:14.2 Audio device [0403]: ATI Technologies Inc SBx00 Azalia (Intel HDA) [1002:4383]
Kernel driver in use: HDA Intel
Kernel modules: snd-hda-intel
00:14.3 ISA bridge [0601]: ATI Technologies Inc SB600 PCI to LPC Bridge [1002:438d]
00:14.4 PCI bridge [0604]: ATI Technologies Inc SBx00 PCI to PCI Bridge [1002:4384]
00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration [1022:1100]
00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map [1022:1101]
00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller [1022:1102]
00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control [1022:1103]
Kernel driver in use: k8temp
Kernel modules: k8temp
01:05.0 VGA compatible controller [0300]: ATI Technologies Inc RS690 [Radeon X1200 Series] [1002:791e]
01:05.2 Audio device [0403]: ATI Technologies Inc Radeon X1200 Series Audio Controller [1002:7919]
Kernel driver in use: HDA Intel
Kernel modules: snd-hda-intel
02:0e.0 FireWire (IEEE 1394) [0c00]: Texas Instruments TSB43AB23 IEEE-1394a-2000 Controller (PHY/Link) [104c:8024]
Kernel driver in use: ohci1394
Kernel modules: ohci1394
02:0f.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL-8110SC/8169SC Gigabit Ethernet [10ec:8167] (rev 10)
Kernel driver in use: r8169
Kernel modules: r8169


und wenn ich die ausgabe anders posten soll, dann sagt mir bitte wie.

[anthraxx84]

hwinfo



Driver Info #0:
Driver Status: ati_agp is active
Driver Activation Cmd: "modprobe ati_agp"
Config Status: cfg=no, avail=yes, need=no, active=unknown

15: PCI 01.0: 0604 PCI bridge (Normal decode)
[Created at pci.318]
UDI: /org/freedesktop/Hal/devices/pci_1002_7912
Unique ID: vSkL.HjQnVRFuoa8
SysFS ID: /devices/pci0000:00/0000:00:01.0
SysFS BusID: 0000:00:01.0
Hardware Class: bridge
Model: "ATI RS690 PCI to PCI Bridge (Internal gfx)"
Vendor: pci 0x1002 "ATI Technologies Inc"
Device: pci 0x7912 "RS690 PCI to PCI Bridge (Internal gfx)"
Module Alias: "pci:v00001002d00007912sv00000000sd00000000bc06sc04 i00"
Driver Info #0:
Driver Status: shpchp is active
Driver Activation Cmd: "modprobe shpchp"
Config Status: cfg=no, avail=yes, need=no, active=unknown

16: PCI 12.0: 0106 SATA controller (AHCI 1.0)
[Created at pci.318]
UDI: /org/freedesktop/Hal/devices/pci_1002_4380
Unique ID: CLZK.NVChKMqcXx8
SysFS ID: /devices/pci0000:00/0000:00:12.0
SysFS BusID: 0000:00:12.0
Hardware Class: storage
Model: "ATI SB600 Non-Raid-5 SATA"
Vendor: pci 0x1002 "ATI Technologies Inc"
Device: pci 0x4380 "SB600 Non-Raid-5 SATA"
SubVendor: pci 0x1458 "Giga-byte Technology"
SubDevice: pci 0xb002
Driver: "ahci"
Driver Modules: "ahci"
I/O Ports: 0xff00-0xff07 (rw)
I/O Ports: 0xfe00-0xfe03 (rw)
I/O Ports: 0xfd00-0xfd07 (rw)
I/O Ports: 0xfc00-0xfc03 (rw)
I/O Ports: 0xfb00-0xfb0f (rw)
Memory Range: 0xfe02f000-0xfe02f3ff (rw,non-prefetchable)
IRQ: 22 (434437 events)
Module Alias: "pci:v00001002d00004380sv00001458sd0000B002bc01sc06 i01"
Driver Info #0:
Driver Status: ahci is active
Driver Activation Cmd: "modprobe ahci"
Config Status: cfg=no, avail=yes, need=no, active=unknown

17: PCI 13.0: 0c03 USB Controller (OHCI)
[Created at pci.318]
UDI: /org/freedesktop/Hal/devices/pci_1002_4387
Unique ID: HSco.NhNylN4csY5
SysFS ID: /devices/pci0000:00/0000:00:13.0
SysFS BusID: 0000:00:13.0
Hardware Class: usb controller
Model: "ATI SB600 USB (OHCI0)"
Vendor: pci 0x1002 "ATI Technologies Inc"
Device: pci 0x4387 "SB600 USB (OHCI0)"
SubVendor: pci 0x1458 "Giga-byte Technology"
SubDevice: pci 0x5004
Driver: "ohci_hcd"
Driver Modules: "ohci_hcd"
Memory Range: 0xfe02e000-0xfe02efff (rw,non-prefetchable)
IRQ: 16 (895093 events)
Module Alias: "pci:v00001002d00004387sv00001458sd00005004bc0Csc03 i10"
Driver Info #0:
Driver Status: ohci-hcd is active
Driver Activation Cmd: "modprobe ohci-hcd"
Config Status: cfg=no, avail=yes, need=no, active=unknown

18: PCI 13.1: 0c03 USB Controller (OHCI)
[Created at pci.318]
UDI: /org/freedesktop/Hal/devices/pci_1002_4388
Unique ID: 9n5e.u5KiEyBJOx5
SysFS ID: /devices/pci0000:00/0000:00:13.1
SysFS BusID: 0000:00:13.1
Hardware Class: usb controller
Model: "ATI SB600 USB (OHCI1)"
Vendor: pci 0x1002 "ATI Technologies Inc"
Device: pci 0x4388 "SB600 USB (OHCI1)"
SubVendor: pci 0x1458 "Giga-byte Technology"
SubDevice: pci 0x5004
Driver: "ohci_hcd"
Driver Modules: "ohci_hcd"
Memory Range: 0xfe02d000-0xfe02dfff (rw,non-prefetchable)
IRQ: 17 (no events)
Module Alias: "pci:v00001002d00004388sv00001458sd00005004bc0Csc03 i10"
Driver Info #0:
Driver Status: ohci-hcd is active
Driver Activation Cmd: "modprobe ohci-hcd"
Config Status: cfg=no, avail=yes, need=no, active=unknown

19: PCI 13.2: 0c03 USB Controller (OHCI)
[Created at pci.318]
UDI: /org/freedesktop/Hal/devices/pci_1002_4389
Unique ID: 06bT.PWGSjWJ0wJ6
SysFS ID: /devices/pci0000:00/0000:00:13.2
SysFS BusID: 0000:00:13.2
Hardware Class: usb controller
Model: "ATI SB600 USB (OHCI2)"
Vendor: pci 0x1002 "ATI Technologies Inc"
Device: pci 0x4389 "SB600 USB (OHCI2)"
SubVendor: pci 0x1458 "Giga-byte Technology"
SubDevice: pci 0x5004
Driver: "ohci_hcd"
Driver Modules: "ohci_hcd"
Memory Range: 0xfe02c000-0xfe02cfff (rw,non-prefetchable)
IRQ: 18 (322553 events)
Module Alias: "pci:v00001002d00004389sv00001458sd00005004bc0Csc03 i10"
Driver Info #0:
Driver Status: ohci-hcd is active
Driver Activation Cmd: "modprobe ohci-hcd"
Config Status: cfg=no, avail=yes, need=no, active=unknown

20: PCI 13.3: 0c03 USB Controller (OHCI)
[Created at pci.318]
UDI: /org/freedesktop/Hal/devices/pci_1002_438a
Unique ID: tQ4J.wwCCC5RjRi6
SysFS ID: /devices/pci0000:00/0000:00:13.3
SysFS BusID: 0000:00:13.3
Hardware Class: usb controller
Model: "ATI SB600 USB (OHCI3)"
Vendor: pci 0x1002 "ATI Technologies Inc"
Device: pci 0x438a "SB600 USB (OHCI3)"
SubVendor: pci 0x1458 "Giga-byte Technology"
SubDevice: pci 0x5004
Driver: "ohci_hcd"
Driver Modules: "ohci_hcd"
Memory Range: 0xfe02b000-0xfe02bfff (rw,non-prefetchable)
IRQ: 17 (no events)
Module Alias: "pci:v00001002d0000438Asv00001458sd00005004bc0Csc03 i10"
Driver Info #0:
Driver Status: ohci-hcd is active
Driver Activation Cmd: "modprobe ohci-hcd"
Config Status: cfg=no, avail=yes, need=no, active=unknown

21: PCI 13.4: 0c03 USB Controller (OHCI)
[Created at pci.318]
UDI: /org/freedesktop/Hal/devices/pci_1002_438b
Unique ID: llZ8.RL9ygfYQz47
SysFS ID: /devices/pci0000:00/0000:00:13.4
SysFS BusID: 0000:00:13.4
Hardware Class: usb controller
Model: "ATI SB600 USB (OHCI4)"
Vendor: pci 0x1002 "ATI Technologies Inc"
Device: pci 0x438b "SB600 USB (OHCI4)"
SubVendor: pci 0x1458 "Giga-byte Technology"
SubDevice: pci 0x5004
Driver: "ohci_hcd"
Driver Modules: "ohci_hcd"
Memory Range: 0xfe02a000-0xfe02afff (rw,non-prefetchable)
IRQ: 18 (322553 events)
Module Alias: "pci:v00001002d0000438Bsv00001458sd00005004bc0Csc03 i10"
Driver Info #0:
Driver Status: ohci-hcd is active
Driver Activation Cmd: "modprobe ohci-hcd"
Config Status: cfg=no, avail=yes, need=no, active=unknown

22: PCI 13.5: 0c03 USB Controller (EHCI)
[Created at pci.318]
UDI: /org/freedesktop/Hal/devices/pci_1002_4386
Unique ID: c43_.6HEIQJq2zJB
SysFS ID: /devices/pci0000:00/0000:00:13.5
SysFS BusID: 0000:00:13.5
Hardware Class: usb controller
Model: "ATI SB600 USB Controller (EHCI)"
Vendor: pci 0x1002 "ATI Technologies Inc"
Device: pci 0x4386 "SB600 USB Controller (EHCI)"
SubVendor: pci 0x1458 "Giga-byte Technology"
SubDevice: pci 0x5004
Driver: "ehci_hcd"
Driver Modules: "ehci_hcd"
Memory Range: 0xfe029000-0xfe0290ff (rw,non-prefetchable)
IRQ: 19 (2972 events)
Module Alias: "pci:v00001002d00004386sv00001458sd00005004bc0Csc03 i20"
Driver Info #0:
Driver Status: ehci-hcd is active
Driver Activation Cmd: "modprobe ehci-hcd"
Config Status: cfg=no, avail=yes, need=no, active=unknown

23: PCI 14.0: 0c05 SMBus
[Created at pci.318]
UDI: /org/freedesktop/Hal/devices/pci_1002_4385
Unique ID: MZfG.dZdei8xPVEE
SysFS ID: /devices/pci0000:00/0000:00:14.0
SysFS BusID: 0000:00:14.0
Hardware Class: unknown
Model: "ATI SBx00 SMBus Controller"
Vendor: pci 0x1002 "ATI Technologies Inc"
Device: pci 0x4385 "SBx00 SMBus Controller"
SubVendor: pci 0x1458 "Giga-byte Technology"
SubDevice: pci 0x4385
Revision: 0x14
Driver: "piix4_smbus"
Driver Modules: "i2c_piix4"
I/O Ports: 0xb00-0xb0f (rw)
Module Alias: "pci:v00001002d00004385sv00001458sd00004385bc0Csc05 i00"
Driver Info #0:
Driver Status: i2c_piix4 is active
Driver Activation Cmd: "modprobe i2c_piix4"
Config Status: cfg=no, avail=yes, need=no, active=unknown

24: PCI 14.1: 0101 IDE interface
[Created at pci.318]
UDI: /org/freedesktop/Hal/devices/pci_1002_438c
Unique ID: Eu86.dg8gMRJL7j7
SysFS ID: /devices/pci0000:00/0000:00:14.1
SysFS BusID: 0000:00:14.1
Hardware Class: storage
Model: "ATI SB600 IDE"
Vendor: pci 0x1002 "ATI Technologies Inc"
Device: pci 0x438c "SB600 IDE"
SubVendor: pci 0x1458 "Giga-byte Technology"
SubDevice: pci 0x5002
Driver: "pata_atiixp"
Driver Modules: "pata_atiixp"
I/O Ports: 0x1f0-0x1f7 (rw)
I/O Port: 0x3f6 (rw)
I/O Ports: 0x170-0x177 (rw)
I/O Port: 0x376 (rw)
I/O Ports: 0xf900-0xf90f (rw)
IRQ: 16 (895093 events)
Module Alias: "pci:v00001002d0000438Csv00001458sd00005002bc01sc01 i8a"
Driver Info #0:
Driver Status: pata_atiixp is active
Driver Activation Cmd: "modprobe pata_atiixp"
Driver Info #1:
Driver Status: atiixp is active
Driver Activation Cmd: "modprobe atiixp"
Driver Info #2:
Driver Status: pata_acpi is not active
Driver Activation Cmd: "modprobe pata_acpi"
Driver Info #3:
Driver Status: ata_generic is active
Driver Activation Cmd: "modprobe ata_generic"
Driver Info #4:
Driver Status: ide_pci_generic is active
Driver Activation Cmd: "modprobe ide_pci_generic"
Config Status: cfg=no, avail=yes, need=no, active=unknown

25: PCI 14.2: 0403 Audio device
[Created at pci.318]
UDI: /org/freedesktop/Hal/devices/pci_1002_4383
Unique ID: 5Dex.9zCmC9gVD38
SysFS ID: /devices/pci0000:00/0000:00:14.2
SysFS BusID: 0000:00:14.2
Hardware Class: sound
Model: "ATI SBx00 Azalia (Intel HDA)"
Vendor: pci 0x1002 "ATI Technologies Inc"
Device: pci 0x4383 "SBx00 Azalia (Intel HDA)"
SubVendor: pci 0x1458 "Giga-byte Technology"
SubDevice: pci 0xa002
Driver: "HDA Intel"
Driver Modules: "snd_hda_intel"
Memory Range: 0xfe024000-0xfe027fff (rw,non-prefetchable)
IRQ: 16 (895093 events)
Module Alias: "pci:v00001002d00004383sv00001458sd0000A002bc04sc03 i00"
Driver Info #0:
Driver Status: snd_hda_intel is active
Driver Activation Cmd: "modprobe snd_hda_intel"
Config Status: cfg=no, avail=yes, need=no, active=unknown

26: PCI 14.3: 0601 ISA bridge
[Created at pci.318]
UDI: /org/freedesktop/Hal/devices/pci_1002_438d
Unique ID: yX7n.Y_G9bYr3Rx6
SysFS ID: /devices/pci0000:00/0000:00:14.3
SysFS BusID: 0000:00:14.3
Hardware Class: bridge
Model: "ATI SB600 PCI to LPC Bridge"
Vendor: pci 0x1002 "ATI Technologies Inc"
Device: pci 0x438d "SB600 PCI to LPC Bridge"
SubVendor: pci 0x1458 "Giga-byte Technology"
SubDevice: pci 0x5001
Module Alias: "pci:v00001002d0000438Dsv00001458sd00005001bc06sc01 i00"
Config Status: cfg=no, avail=yes, need=no, active=unknown

27: PCI 14.4: 0604 PCI bridge (Subtractive decode)
[Created at pci.318]
UDI: /org/freedesktop/Hal/devices/pci_1002_4384
Unique ID: qscc.ULOo3yhA66C
SysFS ID: /devices/pci0000:00/0000:00:14.4
SysFS BusID: 0000:00:14.4
Hardware Class: bridge
Model: "ATI SBx00 PCI to PCI Bridge"
Vendor: pci 0x1002 "ATI Technologies Inc"
Device: pci 0x4384 "SBx00 PCI to PCI Bridge"
Module Alias: "pci:v00001002d00004384sv00000000sd00000000bc06sc04 i01"
Config Status: cfg=no, avail=yes, need=no, active=unknown

28: PCI 18.0: 0600 Host bridge
[Created at pci.318]
UDI: /org/freedesktop/Hal/devices/pci_1022_1100
Unique ID: fiDB.ptk_g9XAN03
SysFS ID: /devices/pci0000:00/0000:00:18.0
SysFS BusID: 0000:00:18.0
Hardware Class: bridge
Model: "AMD K8 [Athlon64/Opteron] HyperTransport Technology Configuration"
Vendor: pci 0x1022 "AMD"
Device: pci 0x1100 "K8 [Athlon64/Opteron] HyperTransport Technology Configuration"
Module Alias: "pci:v00001022d00001100sv00000000sd00000000bc06sc00 i00"
Config Status: cfg=no, avail=yes, need=no, active=unknown

29: PCI 18.1: 0600 Host bridge
[Created at pci.318]
UDI: /org/freedesktop/Hal/devices/pci_1022_1101
Unique ID: W1j0.KIhk9ketuO3
SysFS ID: /devices/pci0000:00/0000:00:18.1
SysFS BusID: 0000:00:18.1
Hardware Class: bridge
Model: "AMD K8 [Athlon64/Opteron] Address Map"
Vendor: pci 0x1022 "AMD"
Device: pci 0x1101 "K8 [Athlon64/Opteron] Address Map"
Module Alias: "pci:v00001022d00001101sv00000000sd00000000bc06sc00 i00"
Config Status: cfg=no, avail=yes, need=no, active=unknown

30: PCI 18.2: 0600 Host bridge
[Created at pci.318]
UDI: /org/freedesktop/Hal/devices/pci_1022_1102
Unique ID: OMCs.ridUeImaQn3
SysFS ID: /devices/pci0000:00/0000:00:18.2
SysFS BusID: 0000:00:18.2
Hardware Class: bridge
Model: "AMD K8 [Athlon64/Opteron] DRAM Controller"
Vendor: pci 0x1022 "AMD"
Device: pci 0x1102 "K8 [Athlon64/Opteron] DRAM Controller"
Module Alias: "pci:v00001022d00001102sv00000000sd00000000bc06sc00 i00"
Config Status: cfg=no, avail=yes, need=no, active=unknown

31: PCI 18.3: 0600 Host bridge
[Created at pci.318]
UDI: /org/freedesktop/Hal/devices/pci_1022_1103
Unique ID: Fhhh.M7aE7ttHy94
SysFS ID: /devices/pci0000:00/0000:00:18.3
SysFS BusID: 0000:00:18.3
Hardware Class: bridge
Model: "AMD K8 [Athlon64/Opteron] Miscellaneous Control"
Vendor: pci 0x1022 "AMD"
Device: pci 0x1103 "K8 [Athlon64/Opteron] Miscellaneous Control"
Driver: "k8temp"
Driver Modules: "k8temp"
Module Alias: "pci:v00001022d00001103sv00000000sd00000000bc06sc00 i00"
Driver Info #0:
Driver Status: k8temp is active
Driver Activation Cmd: "modprobe k8temp"
Config Status: cfg=no, avail=yes, need=no, active=unknown

32: PCI 105.0: 0300 VGA compatible controller (VGA)
[Created at pci.318]
UDI: /org/freedesktop/Hal/devices/pci_1002_791e
Unique ID: ul7N.LPqDyF5n6TC
Parent ID: vSkL.HjQnVRFuoa8
SysFS ID: /devices/pci0000:00/0000:00:01.0/0000:01:05.0
SysFS BusID: 0000:01:05.0
Hardware Class: graphics card
Model: "ATI Radeon X1200"
Vendor: pci 0x1002 "ATI Technologies Inc"
Device: pci 0x791e "Radeon X1200"
SubVendor: pci 0x1458 "Giga-byte Technology"
SubDevice: pci 0xd001
Memory Range: 0xd8000000-0xdfffffff (rw,prefetchable)
Memory Range: 0xfdfe0000-0xfdfeffff (rw,non-prefetchable)
I/O Ports: 0xee00-0xeeff (rw)
Memory Range: 0xfde00000-0xfdefffff (rw,non-prefetchable)
IRQ: 18 (322553 events)
I/O Ports: 0x3c0-0x3df (rw)
Module Alias: "pci:v00001002d0000791Esv00001458sd0000D001bc03sc00 i00"
Driver Info #0:
XFree86 v4 Server Module: radeonhd
Driver Info #1:
XFree86 v4 Server Module: radeonhd
3D Support: yes
Config Status: cfg=no, avail=yes, need=no, active=unknown
Attached to: #15 (PCI bridge)

33: PCI 105.2: 0403 Audio device
[Created at pci.318]
UDI: /org/freedesktop/Hal/devices/pci_1002_7919
Unique ID: dP62.zj1ysiXWK31
Parent ID: vSkL.HjQnVRFuoa8
SysFS ID: /devices/pci0000:00/0000:00:01.0/0000:01:05.2
SysFS BusID: 0000:01:05.2
Hardware Class: sound
Model: "ATI Radeon X1200 Series Audio Controller"
Vendor: pci 0x1002 "ATI Technologies Inc"
Device: pci 0x7919 "Radeon X1200 Series Audio Controller"
SubVendor: pci 0x1458 "Giga-byte Technology"
SubDevice: pci 0x7919
Driver: "HDA Intel"
Driver Modules: "snd_hda_intel"
Memory Range: 0xfdffc000-0xfdffffff (rw,non-prefetchable)
IRQ: 19 (2972 events)
Module Alias: "pci:v00001002d00007919sv00001458sd00007919bc04sc03 i00"
Driver Info #0:
Driver Status: snd_hda_intel is active
Driver Activation Cmd: "modprobe snd_hda_intel"
Config Status: cfg=no, avail=yes, need=no, active=unknown
Attached to: #15 (PCI bridge)

34: PCI 20e.0: 0c00 FireWire (IEEE 1394) (OHCI)
[Created at pci.318]
UDI: /org/freedesktop/Hal/devices/pci_104c_8024
Unique ID: Gcmk.yKpOLevOUQ8
Parent ID: qscc.ULOo3yhA66C
SysFS ID: /devices/pci0000:00/0000:00:14.4/0000:02:0e.0
SysFS BusID: 0000:02:0e.0
Hardware Class: firewire controller
Model: "Texas Instruments TSB43AB23 IEEE-1394a-2000 Controller (PHY/Link)"
Vendor: pci 0x104c "Texas Instruments"
Device: pci 0x8024 "TSB43AB23 IEEE-1394a-2000 Controller (PHY/Link)"
SubVendor: pci 0x1458 "Giga-byte Technology"
SubDevice: pci 0x1000 "GA-EP45-DS5 Motherboard"
Driver: "ohci1394"
Driver Modules: "ohci1394"
Memory Range: 0xfddff000-0xfddff7ff (rw,non-prefetchable)
Memory Range: 0xfddf8000-0xfddfbfff (rw,non-prefetchable)
IRQ: 22 (434437 events)
Module Alias: "pci:v0000104Cd00008024sv00001458sd00001000bc0Csc00 i10"
Driver Info #0:
Driver Status: ohci1394 is active
Driver Activation Cmd: "modprobe ohci1394"
Config Status: cfg=no, avail=yes, need=no, active=unknown
Attached to: #27 (PCI bridge)

35: PCI 20f.0: 0200 Ethernet controller
[Created at pci.318]
UDI: /org/freedesktop/Hal/devices/pci_10ec_8167
Unique ID: rBUF.kdNnBFBJa1D
Parent ID: qscc.ULOo3yhA66C
SysFS ID: /devices/pci0000:00/0000:00:14.4/0000:02:0f.0
SysFS BusID: 0000:02:0f.0
Hardware Class: network
Model: "Realtek RTL-8110SC/8169SC Gigabit Ethernet"
Vendor: pci 0x10ec "Realtek Semiconductor Co., Ltd."
Device: pci 0x8167 "RTL-8110SC/8169SC Gigabit Ethernet"
SubVendor: pci 0x1458 "Giga-byte Technology"
SubDevice: pci 0xe000
Revision: 0x10
Driver: "r8169"
Driver Modules: "r8169"
Device File: eth0
I/O Ports: 0xde00-0xdeff (rw)
Memory Range: 0xfddfe000-0xfddfe0ff (rw,non-prefetchable)
Memory Range: 0xfdc00000-0xfdc1ffff (ro,prefetchable,disabled)
IRQ: 23 (2251895 events)
HW Address: 00:1a:4d:41:8a:1b
Link detected: yes
Module Alias: "pci:v000010ECd00008167sv00001458sd0000E000bc02sc00 i00"
Driver Info #0:
Driver Status: r8169 is active
Driver Activation Cmd: "modprobe r8169"
Config Status: cfg=no, avail=yes, need=no, active=unknown
Attached to: #27 (PCI bridge)

36: ISA(PnP) 00.0: 0000 Unclassified device
[Created at isapnp.142]
UDI: /org/freedesktop/Hal/devices/pnp_PNP0a03
Unique ID: z9pp.QBqTp8zQt87
SysFS ID: /devices/pnp0/00:00
SysFS BusID: 00:00
Hardware Class: unknown
Model: "Unclassified device"
SubVendor: PNP "PnP"
SubDevice: eisa 0x0a03
Config Status: cfg=no, avail=yes, need=no, active=unknown

37: ISA(PnP) 00.0: 0000 Unclassified device
[Created at isapnp.142]
UDI: /org/freedesktop/Hal/devices/pnp_PNP0c02
Unique ID: QL3u.B+yZ9Ve8gC1
SysFS ID: /devices/pnp0/00:01
SysFS BusID: 00:01
Hardware Class: unknown
Model: "Unclassified device"
SubVendor: PNP "PnP"
SubDevice: eisa 0x0c02
Config Status: cfg=no, avail=yes, need=no, active=unknown

38: ISA(PnP) 00.0: 0000 Unclassified device
[Created at isapnp.142]
UDI: /org/freedesktop/Hal/devices/pnp_PNP0200
Unique ID: tWJy.ld94kxNGZf5
SysFS ID: /devices/pnp0/00:02
SysFS BusID: 00:02
Hardware Class: unknown
Model: "Unclassified device"
SubVendor: PNP "PnP"
SubDevice: eisa 0x0200
Config Status: cfg=no, avail=yes, need=no, active=unknown

39: ISA(PnP) 00.0: 0000 Unclassified device
[Created at isapnp.142]
UDI: /org/freedesktop/Hal/devices/pnp_PNP0103
Unique ID: KiZ0.fG36JLVNse9
SysFS ID: /devices/pnp0/00:03
SysFS BusID: 00:03
Hardware Class: unknown
Model: "Unclassified device"
SubVendor: PNP "PnP"
SubDevice: eisa 0x0103
Config Status: cfg=no, avail=yes, need=no, active=unknown

40: ISA(PnP) 00.0: 0000 Unclassified device
[Created at isapnp.142]
UDI: /org/freedesktop/Hal/devices/pnp_PNP0b00
Unique ID: ntp4.WYwRElrJa93
SysFS ID: /devices/pnp0/00:04
SysFS BusID: 00:04
Hardware Class: unknown
Model: "Unclassified device"
SubVendor: PNP "PnP"
SubDevice: eisa 0x0b00
Config Status: cfg=no, avail=yes, need=no, active=unknown

41: ISA(PnP) 00.0: 0000 Unclassified device
[Created at isapnp.142]
UDI: /org/freedesktop/Hal/devices/pnp_PNP0800
Unique ID: E349.bvKf3UMzZfE
SysFS ID: /devices/pnp0/00:05
SysFS BusID: 00:05
Hardware Class: unknown
Model: "Unclassified device"
SubVendor: PNP "PnP"
SubDevice: eisa 0x0800
Config Status: cfg=no, avail=yes, need=no, active=unknown

42: ISA(PnP) 00.0: 0000 Unclassified device
[Created at isapnp.142]
UDI: /org/freedesktop/Hal/devices/pnp_PNP0c04
Unique ID: hEKD.DE8RM9cWQQ8
SysFS ID: /devices/pnp0/00:06
SysFS BusID: 00:06
Hardware Class: unknown
Model: "Unclassified device"
SubVendor: PNP "PnP"
SubDevice: eisa 0x0c04
Config Status: cfg=no, avail=yes, need=no, active=unknown

43: ISA(PnP) 00.0: 0000 Unclassified device
[Created at isapnp.142]
UDI: /org/freedesktop/Hal/devices/pnp_PNP0c02_0
Unique ID: NhVi.B+yZ9Ve8gC1
SysFS ID: /devices/pnp0/00:07
SysFS BusID: 00:07
Hardware Class: unknown
Model: "Unclassified device"
SubVendor: PNP "PnP"
SubDevice: eisa 0x0c02
Config Status: cfg=no, avail=yes, need=no, active=unknown

44: ISA(PnP) 00.0: 0000 Unclassified device
[Created at isapnp.142]
UDI: /org/freedesktop/Hal/devices/pnp_PNP0700
Unique ID: qslm.yhTOLOXWEq7
SysFS ID: /devices/pnp0/00:08
SysFS BusID: 00:08
Hardware Class: unknown
Model: "Unclassified device"
SubVendor: PNP "PnP"
SubDevice: eisa 0x0700
Config Status: cfg=no, avail=yes, need=no, active=unknown

45: ISA(PnP) 00.0: 0000 Unclassified device
[Created at isapnp.142]
UDI: /org/freedesktop/Hal/devices/pnp_PNP0501
Unique ID: H20r.BuKI+1soRmD
SysFS ID: /devices/pnp0/00:09
SysFS BusID: 00:09
Hardware Class: unknown
Model: "Unclassified device"
SubVendor: PNP "PnP"
SubDevice: eisa 0x0501
Config Status: cfg=no, avail=yes, need=no, active=unknown

46: ISA(PnP) 00.0: 0000 Unclassified device
[Created at isapnp.142]
UDI: /org/freedesktop/Hal/devices/pnp_PNP0400
Unique ID: iT2w.13ubA72AEK3
SysFS ID: /devices/pnp0/00:0a
SysFS BusID: 00:0a
Hardware Class: unknown
Model: "Unclassified device"
SubVendor: PNP "PnP"
SubDevice: eisa 0x0400
Config Status: cfg=no, avail=yes, need=no, active=unknown

47: ISA(PnP) 00.0: 0000 Unclassified device
[Created at isapnp.142]
UDI: /org/freedesktop/Hal/devices/pnp_PNP0c02_1
Unique ID: 9fI_.B+yZ9Ve8gC1
SysFS ID: /devices/pnp0/00:0b
SysFS BusID: 00:0b
Hardware Class: unknown
Model: "Unclassified device"
SubVendor: PNP "PnP"
SubDevice: eisa 0x0c02
Config Status: cfg=no, avail=yes, need=no, active=unknown

48: ISA(PnP) 00.0: 0000 Unclassified device
[Created at isapnp.142]
UDI: /org/freedesktop/Hal/devices/pnp_PNP0c01
Unique ID: cqY2.gNN83gfynbD
SysFS ID: /devices/pnp0/00:0c
SysFS BusID: 00:0c
Hardware Class: unknown
Model: "Unclassified device"
SubVendor: PNP "PnP"
SubDevice: eisa 0x0c01
Config Status: cfg=no, avail=yes, need=no, active=unknown

49: None 00.1: 0700 Serial controller (16550)
[Created at serial.74]
UDI: /org/freedesktop/Hal/devices/pnp_PNP0501_serial_platform_1
Unique ID: v9l_.3fyvFV+mbWD
Hardware Class: unknown
Model: "16550A"
Device: "16550A"
Device File: /dev/ttyS1
I/O Ports: 0x2f8-0x2ff (rw)
IRQ: 3 (18 events)
Config Status: cfg=new, avail=yes, need=no, active=unknown

50: IDE 200.0: 10600 Disk
[Created at block.243]
UDI: /org/freedesktop/Hal/devices/storage_serial_SATA_SAMSUNG_HD080HJS08EJDPP603955
Unique ID: 3OOL.zawY4fLLiB8
Parent ID: CLZK.NVChKMqcXx8
SysFS ID: /class/block/sda
SysFS BusID: 2:0:0:0
SysFS Device Link: /devices/pci0000:00/0000:00:12.0/host2/target2:0:0/2:0:0:0
Hardware Class: disk
Model: "SAMSUNG HD080HJ"
Vendor: "SAMSUNG"
Device: "HD080HJ"
Revision: "ZH10"
Serial ID: "S08EJDPP603955"
Driver: "ahci", "sd"
Driver Modules: "ahci"
Device File: /dev/sda
Device Files: /dev/sda, /dev/disk/by-id/scsi-SATA_SAMSUNG_HD080HJS08EJDPP603955, /dev/disk/by-id/ata-SAMSUNG_HD080HJ_S08EJDPP603955, /dev/disk/by-path/pci-0000:00:12.0-scsi-2:0:0:0, /dev/disk/by-id/edd-int13_dev80
Device Number: block 8:0-8:15
BIOS id: 0x80
Geometry (Logical): CHS 9729/255/63
Size: 156301488 sectors a 512 bytes
Geometry (BIOS EDD): CHS 155061/16/63
Size (BIOS EDD): 156301488 sectors
Geometry (BIOS Legacy): CHS 1024/255/63
Config Status: cfg=no, avail=yes, need=no, active=unknown
Attached to: #16 (SATA controller)

51: None 00.0: 11300 Partition
[Created at block.412]
UDI: /org/freedesktop/Hal/devices/volume_part1_size_1024
Unique ID: bdUI.SE1wIdpsiiC
Parent ID: 3OOL.zawY4fLLiB8
SysFS ID: /class/block/sda/sda1
Hardware Class: partition
Model: "Partition"
Device File: /dev/sda1
Device Files: /dev/sda1, /dev/disk/by-id/scsi-SATA_SAMSUNG_HD080HJS08EJDPP603955-part1, /dev/disk/by-id/ata-SAMSUNG_HD080HJ_S08EJDPP603955-part1, /dev/disk/by-path/pci-0000:00:12.0-scsi-2:0:0:0-part1, /dev/disk/by-id/edd-int13_dev80-part1
Config Status: cfg=no, avail=yes, need=no, active=unknown
Attached to: #50 (Disk)

52: None 00.0: 11300 Partition
[Created at block.412]
UDI: /org/freedesktop/Hal/devices/volume_uuid_01C9AEDAE97A9C00
Unique ID: 2pkM.SE1wIdpsiiC
Parent ID: 3OOL.zawY4fLLiB8
SysFS ID: /class/block/sda/sda2
Hardware Class: partition
Model: "Partition"
Device File: /dev/sda2
Device Files: /dev/sda2, /dev/disk/by-id/scsi-SATA_SAMSUNG_HD080HJS08EJDPP603955-part2, /dev/disk/by-id/ata-SAMSUNG_HD080HJ_S08EJDPP603955-part2, /dev/disk/by-path/pci-0000:00:12.0-scsi-2:0:0:0-part2, /dev/disk/by-uuid/01C9AEDAE97A9C00, /dev/disk/by-id/edd-int13_dev80-part2
Config Status: cfg=no, avail=yes, need=no, active=unknown
Attached to: #50 (Disk)

53: None 00.0: 11300 Partition
[Created at block.412]
UDI: /org/freedesktop/Hal/devices/volume_uuid_f9a6b842_c2b5_4f25_b266_7ba8c8d6e4d2
Unique ID: QLVZ.SE1wIdpsiiC
Parent ID: 3OOL.zawY4fLLiB8
SysFS ID: /class/block/sda/sda5
Hardware Class: partition
Model: "Partition"
Device File: /dev/sda5
Device Files: /dev/sda5, /dev/disk/by-id/scsi-SATA_SAMSUNG_HD080HJS08EJDPP603955-part5, /dev/disk/by-id/ata-SAMSUNG_HD080HJ_S08EJDPP603955-part5, /dev/disk/by-path/pci-0000:00:12.0-scsi-2:0:0:0-part5, /dev/disk/by-uuid/f9a6b842-c2b5-4f25-b266-7ba8c8d6e4d2, /dev/disk/by-id/edd-int13_dev80-part5
Config Status: cfg=no, avail=yes, need=no, active=unknown
Attached to: #50 (Disk)

54: None 00.0: 11300 Partition
[Created at block.412]
UDI: /org/freedesktop/Hal/devices/volume_uuid_e80ba342_a4b6_45da_bf28_63d999affc82
Unique ID: tWld.SE1wIdpsiiC
Parent ID: 3OOL.zawY4fLLiB8
SysFS ID: /class/block/sda/sda6
Hardware Class: partition
Model: "Partition"
Device File: /dev/sda6
Device Files: /dev/sda6, /dev/root, /dev/disk/by-id/scsi-SATA_SAMSUNG_HD080HJS08EJDPP603955-part6, /dev/disk/by-id/ata-SAMSUNG_HD080HJ_S08EJDPP603955-part6, /dev/disk/by-path/pci-0000:00:12.0-scsi-2:0:0:0-part6, /dev/disk/by-uuid/e80ba342-a4b6-45da-bf28-63d999affc82, /dev/disk/by-id/edd-int13_dev80-part6
Config Status: cfg=no, avail=yes, need=no, active=unknown
Attached to: #50 (Disk)

55: None 00.0: 11300 Partition
[Created at block.412]
UDI: /org/freedesktop/Hal/devices/volume_uuid_4b4f5a1e_e76e_46bd_9919_c88974200ec0
Unique ID: Zzw6.SE1wIdpsiiC
Parent ID: 3OOL.zawY4fLLiB8
SysFS ID: /class/block/sda/sda7
Hardware Class: partition
Model: "Partition"
Device File: /dev/sda7
Device Files: /dev/sda7, /dev/disk/by-id/scsi-SATA_SAMSUNG_HD080HJS08EJDPP603955-part7, /dev/disk/by-id/ata-SAMSUNG_HD080HJ_S08EJDPP603955-part7, /dev/disk/by-path/pci-0000:00:12.0-scsi-2:0:0:0-part7, /dev/disk/by-uuid/4b4f5a1e-e76e-46bd-9919-c88974200ec0, /dev/disk/by-id/edd-int13_dev80-part7
Config Status: cfg=no, avail=yes, need=no, active=unknown
Attached to: #50 (Disk)

56: SCSI 400.0: 10602 CD-ROM (DVD)
[Created at block.247]
UDI: /org/freedesktop/Hal/devices/storage_model_CD_DVDW_SH_S182D
Unique ID: KD9E.0hTqQCgFX56
Parent ID: Eu86.dg8gMRJL7j7
SysFS ID: /class/block/sr0
SysFS BusID: 4:0:0:0
SysFS Device Link: /devices/pci0000:00/0000:00:14.1/host4/target4:0:0/4:0:0:0
Hardware Class: cdrom
Model: "TSSTcorp CD/DVDW SH-S182D"
Vendor: "TSSTcorp"
Device: "CD/DVDW SH-S182D"
Revision: "SB05"
Driver: "pata_atiixp", "sr"
Driver Modules: "pata_atiixp"
Device File: /dev/sr0 (/dev/sg1)
Device Files: /dev/sr0, /dev/scd0, /dev/disk/by-path/pci-0000:00:14.1-scsi-0:0:0:0, /dev/cdrom, /dev/cdrw, /dev/dvd, /dev/dvdrw
Device Number: block 11:0 (char 21:1)
Features: CD-R, CD-RW, DVD, DVD-R, DVD-RW, DVD+R, DVD+RW, DVD+DL, DVDRAM
Drive status: no medium
Config Status: cfg=no, avail=yes, need=no, active=unknown
Attached to: #24 (IDE interface)
Drive Speed: 48

57: USB 00.0: 10a00 Hub
[Created at usb.122]
UDI: /org/freedesktop/Hal/devices/usb_device_1d6b_2_0000_00_13_5_if0
Unique ID: k4bc.MrJLBLcWB9F
Parent ID: c43_.6HEIQJq2zJB
SysFS ID: /devices/pci0000:00/0000:00:13.5/usb1/1-0:1.0
SysFS BusID: 1-0:1.0
Hardware Class: hub
Model: "Linux 2.6.27.29-0.1-pae ehci_hcd EHCI Host Controller"
Hotplug: USB
Vendor: usb 0x1d6b "Linux 2.6.27.29-0.1-pae ehci_hcd"
Device: usb 0x0002 "EHCI Host Controller"
Revision: "2.06"
Serial ID: "0000:00:13.5"
Driver: "hub"
Driver Modules: "usbcore"
Speed: 480 Mbps
Module Alias: "usb:v1D6Bp0002d0206dc09dsc00dp00ic09isc00ip00"
Driver Info #0:
Driver Status: usbcore is active
Driver Activation Cmd: "modprobe usbcore"
Config Status: cfg=no, avail=yes, need=no, active=unknown
Attached to: #22 (USB Controller)

58: USB 00.0: 10a00 Hub
[Created at usb.122]
UDI: /org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_13_0_if0
Unique ID: pBe4.erpEvbsFWX1
Parent ID: HSco.NhNylN4csY5
SysFS ID: /devices/pci0000:00/0000:00:13.0/usb2/2-0:1.0
SysFS BusID: 2-0:1.0
Hardware Class: hub
Model: "Linux 2.6.27.29-0.1-pae ohci_hcd OHCI Host Controller"
Hotplug: USB
Vendor: usb 0x1d6b "Linux 2.6.27.29-0.1-pae ohci_hcd"
Device: usb 0x0001 "OHCI Host Controller"
Revision: "2.06"
Serial ID: "0000:00:13.0"
Driver: "hub"
Driver Modules: "usbcore"
Speed: 12 Mbps
Module Alias: "usb:v1D6Bp0001d0206dc09dsc00dp00ic09isc00ip00"
Driver Info #0:
Driver Status: usbcore is active
Driver Activation Cmd: "modprobe usbcore"
Config Status: cfg=no, avail=yes, need=no, active=unknown
Attached to: #17 (USB Controller)

59: USB 00.0: 10a00 Hub
[Created at usb.122]
UDI: /org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_13_1_if0
Unique ID: uIhY.PaupGMfzSp8
Parent ID: 9n5e.u5KiEyBJOx5
SysFS ID: /devices/pci0000:00/0000:00:13.1/usb3/3-0:1.0
SysFS BusID: 3-0:1.0
Hardware Class: hub
Model: "Linux 2.6.27.29-0.1-pae ohci_hcd OHCI Host Controller"
Hotplug: USB
Vendor: usb 0x1d6b "Linux 2.6.27.29-0.1-pae ohci_hcd"
Device: usb 0x0001 "OHCI Host Controller"
Revision: "2.06"
Serial ID: "0000:00:13.1"
Driver: "hub"
Driver Modules: "usbcore"
Speed: 12 Mbps
Module Alias: "usb:v1D6Bp0001d0206dc09dsc00dp00ic09isc00ip00"
Driver Info #0:
Driver Status: usbcore is active
Driver Activation Cmd: "modprobe usbcore"
Config Status: cfg=no, avail=yes, need=no, active=unknown
Attached to: #18 (USB Controller)

60: USB 00.0: 10a00 Hub
[Created at usb.122]
UDI: /org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_13_2_if0
Unique ID: zPk0.AJzOe6ShP50
Parent ID: 06bT.PWGSjWJ0wJ6
SysFS ID: /devices/pci0000:00/0000:00:13.2/usb4/4-0:1.0
SysFS BusID: 4-0:1.0
Hardware Class: hub
Model: "Linux 2.6.27.29-0.1-pae ohci_hcd OHCI Host Controller"
Hotplug: USB
Vendor: usb 0x1d6b "Linux 2.6.27.29-0.1-pae ohci_hcd"
Device: usb 0x0001 "OHCI Host Controller"
Revision: "2.06"
Serial ID: "0000:00:13.2"
Driver: "hub"
Driver Modules: "usbcore"
Speed: 12 Mbps
Module Alias: "usb:v1D6Bp0001d0206dc09dsc00dp00ic09isc00ip00"
Driver Info #0:
Driver Status: usbcore is active
Driver Activation Cmd: "modprobe usbcore"
Config Status: cfg=no, avail=yes, need=no, active=unknown
Attached to: #19 (USB Controller)

61: USB 00.0: 10a00 Hub
[Created at usb.122]
UDI: /org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_13_3_if0
Unique ID: 2XnU.x12_+sEPMN7
Parent ID: tQ4J.wwCCC5RjRi6
SysFS ID: /devices/pci0000:00/0000:00:13.3/usb5/5-0:1.0
SysFS BusID: 5-0:1.0
Hardware Class: hub
Model: "Linux 2.6.27.29-0.1-pae ohci_hcd OHCI Host Controller"
Hotplug: USB
Vendor: usb 0x1d6b "Linux 2.6.27.29-0.1-pae ohci_hcd"
Device: usb 0x0001 "OHCI Host Controller"
Revision: "2.06"
Serial ID: "0000:00:13.3"
Driver: "hub"
Driver Modules: "usbcore"
Speed: 12 Mbps
Module Alias: "usb:v1D6Bp0001d0206dc09dsc00dp00ic09isc00ip00"
Driver Info #0:
Driver Status: usbcore is active
Driver Activation Cmd: "modprobe usbcore"
Config Status: cfg=no, avail=yes, need=no, active=unknown
Attached to: #20 (USB Controller)

62: USB 00.0: 10503 USB Mouse
[Created at usb.122]
UDI: /org/freedesktop/Hal/devices/usb_device_62a_0_noserial_if0
Unique ID: FKGF.KnNeQ_+xGA5
Parent ID: pBe4.erpEvbsFWX1
SysFS ID: /devices/pci0000:00/0000:00:13.0/usb2/2-1/2-1:1.0
SysFS BusID: 2-1:1.0
Hardware Class: mouse
Model: "Creative USB Mouse"
Hotplug: USB
Vendor: usb 0x062a "Creative Labs"
Device: usb 0x0000
Compatible to: int 0x0210 0x0013
Driver: "usbhid"
Driver Modules: "usbhid"
Device File: /dev/input/mice (/dev/input/mouse0)
Device Files: /dev/input/mice, /dev/input/mouse0, /dev/input/event0, /dev/input/by-id/usb-062a_0000-event-mouse, /dev/input/by-path/pci-0000:00:13.0-usb-0:1:1.0-event-mouse, /dev/input/by-id/usb-062a_0000-mouse, /dev/input/by-path/pci-0000:00:13.0-usb-0:1:1.0-mouse
Device Number: char 13:63 (char 13:32)
Speed: 1.5 Mbps
Module Alias: "usb:v062Ap0000d0000dc00dsc00dp00ic03isc01ip02"
Driver Info #0:
Buttons: 3
Wheels: 1
XFree86 Protocol: explorerps/2
GPM Protocol: exps2
Config Status: cfg=no, avail=yes, need=no, active=unknown
Attached to: #58 (Hub)

63: USB 00.0: 10a00 Hub
[Created at usb.122]
UDI: /org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_13_4_if0
Unique ID: 7eqy.im6ZNd17JfE
Parent ID: llZ8.RL9ygfYQz47
SysFS ID: /devices/pci0000:00/0000:00:13.4/usb6/6-0:1.0
SysFS BusID: 6-0:1.0
Hardware Class: hub
Model: "Linux 2.6.27.29-0.1-pae ohci_hcd OHCI Host Controller"
Hotplug: USB
Vendor: usb 0x1d6b "Linux 2.6.27.29-0.1-pae ohci_hcd"
Device: usb 0x0001 "OHCI Host Controller"
Revision: "2.06"
Serial ID: "0000:00:13.4"
Driver: "hub"
Driver Modules: "usbcore"
Speed: 12 Mbps
Module Alias: "usb:v1D6Bp0001d0206dc09dsc00dp00ic09isc00ip00"
Driver Info #0:
Driver Status: usbcore is active
Driver Activation Cmd: "modprobe usbcore"
Config Status: cfg=no, avail=yes, need=no, active=unknown
Attached to: #21 (USB Controller)

64: USB 00.0: 10800 Keyboard
[Created at usb.122]
UDI: /org/freedesktop/Hal/devices/usb_device_458_48_noserial_if0
Unique ID: hSuP.RsmxE48j0gC
Parent ID: pBe4.erpEvbsFWX1
SysFS ID: /devices/pci0000:00/0000:00:13.0/usb2/2-2/2-2:1.0
SysFS BusID: 2-2:1.0
Hardware Class: keyboard
Model: "KYE Wireless Keyboard & Mouse"
Hotplug: USB
Vendor: usb 0x0458 "KYE Systems"
Device: usb 0x0048 "Wireless Keyboard & Mouse"
Revision: "1.00"
Driver: "usbhid"
Driver Modules: "usbhid"
Device File: /dev/input/input1
Speed: 1.5 Mbps
Module Alias: "usb:v0458p0048d0100dc00dsc00dp00ic03isc01ip01"
Driver Info #0:
XkbRules: xfree86
XkbModel: pc104
Config Status: cfg=no, avail=yes, need=no, active=unknown
Attached to: #58 (Hub)

65: USB 00.1: 10503 USB Mouse
[Created at usb.122]
UDI: /org/freedesktop/Hal/devices/usb_device_458_48_noserial_if1
Unique ID: 8e8U.8++fSp3TppB
Parent ID: pBe4.erpEvbsFWX1
SysFS ID: /devices/pci0000:00/0000:00:13.0/usb2/2-2/2-2:1.1
SysFS BusID: 2-2:1.1
Hardware Class: mouse
Model: "KYE Wireless Keyboard & Mouse"
Hotplug: USB
Vendor: usb 0x0458 "KYE Systems"
Device: usb 0x0048 "Wireless Keyboard & Mouse"
Revision: "1.00"
Compatible to: int 0x0210 0x0023
Driver: "usbhid"
Driver Modules: "usbhid"
Device File: /dev/input/mice (/dev/input/mouse1)
Device Files: /dev/input/mice, /dev/input/mouse1, /dev/input/event2, /dev/input/by-id/usb-KYE_Systems_Corp._Wireless_Keyboard___Mouse-event-mouse, /dev/input/by-path/pci-0000:00:13.0-usb-0:2:1.1-event-mouse, /dev/input/by-id/usb-KYE_Systems_Corp._Wireless_Keyboard___Mouse-mouse, /dev/input/by-path/pci-0000:00:13.0-usb-0:2:1.1-mouse
Device Number: char 13:63 (char 13:33)
Speed: 1.5 Mbps
Module Alias: "usb:v0458p0048d0100dc00dsc00dp00ic03isc01ip02"
Driver Info #0:
Buttons: 3
Wheels: 2
XFree86 Protocol: explorerps/2
GPM Protocol: exps2
Config Status: cfg=no, avail=yes, need=no, active=unknown
Attached to: #58 (Hub)

66: None 00.0: 10103 CPU
[Created at cpu.301]
Unique ID: rdCR.j8NaKXDZtZ6
Hardware Class: cpu
Arch: Intel
Vendor: "AuthenticAMD"
Model: 15.79.2 "AMD Sempron(tm) Processor 3200+"
Features: fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,p ge,mca,cmov,pat,pse36,clflush,mmx,fxsr,sse,sse2,sy scall,nx,mmxext,fxsr_opt,rdtscp,lm,3dnowext,3dnow, up,pni,cx16,lahf_lm,extapic,cr8_legacy
Clock: 1800 MHz
BogoMips: 3608.16
Cache: 128 kb
Config Status: cfg=no, avail=yes, need=no, active=unknown

67: None 00.0: 10000 Monitor
[Created at fb.71]
Unique ID: rdCR.EY_qmtb9YY0
Hardware Class: monitor
Model: "Generic Monitor"
Vendor: "Generic"
Device: "Monitor"
Resolution: 800x600@75Hz
Driver Info #0:
Max. Resolution: 800x600
Vert. Sync Range: 50-90 Hz
Hor. Sync Range: 31-48 kHz
Config Status: cfg=no, avail=yes, need=no, active=unknown

68: None 00.0: 10700 Loopback
[Created at net.124]
Unique ID: ZsBS.GQNx7L4uPNA
SysFS ID: /class/net/lo
Hardware Class: network interface
Model: "Loopback network interface"
Device File: lo
Link detected: yes
Config Status: cfg=no, avail=yes, need=no, active=unknown

69: None 00.0: 10701 Ethernet
[Created at net.124]
Unique ID: usDW.ndpeucax6V1
Parent ID: rBUF.kdNnBFBJa1D
SysFS ID: /class/net/eth0
SysFS Device Link: /devices/pci0000:00/0000:00:14.4/0000:02:0f.0
Hardware Class: network interface
Model: "Ethernet network interface"
Driver: "r8169"
Driver Modules: "r8169"
Device File: eth0
HW Address: 00:1a:4d:41:8a:1b
Link detected: yes
Config Status: cfg=no, avail=yes, need=no, active=unknown
Attached to: #35 (Ethernet controller)
linux-q2n5:/home/Stefan #

[tomfa b68]

So nicht und danke mir nicht zu früh; wird nämlich nicht berechtigt sein! Was ist jetzt mit den "Kollegen" aus dem anderen Forum, die werden ohne jegliche Information hängen gelassen? Du hast dein Problem dort doch erst vor zwei Tagen eingestellt. Wie wäre es mal mit etwas Geduld? Nach circa einer Woche wäre es evtl. angebracht gewesen auch in anderen Foren dein Problem zu erörtern, natürlich mit Querverweisen auf andere Foren. CODE-Tags sind während der Beitragserstellung oberhalb des Textfensters zu finden (#), geht aber auch manuell
Hier kommt der Text rein. Groß- und Kleinschreibung etwas mehr zu beachten, dürfte auch für eine bessere Lesbarkeit ganz brauchbar sein.

[anthraxx84]

Was ist so schlimm daran wenn ich in zwei Foren die Frage stell?
Noch nichts von Effektivität gehört? Ich frag mehrere, bekomm hoffentlich mehrere Lösungen und evtl. schneller.
Das mit den Querverweisen is ja in Ordnung, aber das könnte einem ja auch jemand sagen. steht ja nirgends auf der Anmeldung oder so. Sonst wüsst ichs ja. Erst wenns soweit ist wird rumgemault und man bekommt die Info über Querverweise. Ich bin normal nicht so oft in Foren unterwegs wie andere.
Trotzdem bin ich über jede Hilfe dankbar

[tomfa b68]

Was ist so schlimm daran wenn ich in zwei Foren die Frage stell?
Noch nichts von Effektivität gehört? Ich frag mehrere, bekomm hoffentlich mehrere Lösungen und evtl. schneller.

Lesen und verstehen:
http://www.linux-club.de/viewtopic.php?f=38&t=76935
In diesem Zusammenhang auch noch erwähnenswert: http://www.tty1.net/smart-questions_de.html.

[anthraxx84]

und wieso wird man dann gleich angemault, anstatt dass man einen informiert??
die Anzahl der Beiträge und des Beitritts in die Community ist ja öffentlich.
Na wenn ihr mit allen Neuen so umgeht, dann herzlichen Glückwunsch.

[Rain_maker]

und wieso wird man dann gleich angemault, anstatt dass man einen informiert??

Wurdest Du doch, direkt mit Link, was Du falsch gemacht hast, Du hättest ihn nur lesen müssen.


Kernel driver in use: HDA Intel
Kernel modules: snd-hda-intelBekanntes und oft besprochenes/gelöstes Problem.
Forensuche verwenden, gerne auch in verschiedenen Foren oder mit einer Suchmaschine, das ist dann auch effektiver.

[anthraxx84]

ich habs ja auch gelesen.
und wie war das mit den 2 dummen?


danke für den tipp mit intel-hda.
jetzt werd ichs hoffentlich hinkriegen

[anthraxx84]

so jetzt muss ich mich nochmal melden.
hab ein howto gefunden. http://de.opensuse.org/SDB:Intel-hda

hab meinen codec rausbekommen. ALC 889A
der steht allerdings nicht in der alsa-configuration.txt drin.

hab ich ne ganz andere karte oder kann ich nen anderen codec benutzen?

[tomfa b68]

Was ergibt denn als su/ root:
aplay -l bei dir?
Wegen den zwei Dummen, da gibt es so ein Sprichwort, zwei Dumme ein Gedanke. Falls es nicht bekannt sein sollte. Die folgende Antwort darauf von mir hat auch nichts mit dir zu tun.

Edit: Mal kurz was zwischenspeichern (nur für mich als Gedächtnisstütze).
http://www.google.de/linux?hl=de&q=ALC889A&btnG=Suche&meta=, zweite Ergebnis (evtl.).

Das Audio-abspielgerät "HDA ATI SB (AL C885 Analog) funtioniert nicht.

ALC882/885
3stack-dig 3-jack with SPDIF I/O
6stack-dig 6-jack digital with SPDIF I/O
arima Arima W820Di1
targa Targa T8, MSI-1049 T8
asus-a7j ASUS A7J
asus-a7m ASUS A7M
macpro MacPro support
mbp3 Macbook Pro rev3
imac24 iMac 24'' with jack detection
w2jc ASUS W2JC
auto auto-config reading BIOS (default)
Gute Nacht!

[anthraxx84]

also meine fehlermeldung ist tatsächlich so.
"Das Audio-abspielgerät "HDA ATI SB (AL C885 Analog) funtioniert nicht."

und trotzdem kommt ALC 889A bei "head -n 1 /proc/asound/card0/codec*"
raus

aplay -l:

aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: SB [HDA ATI SB], device 0: ALC885 Analog [ALC885 Analog]
Subdevices: 0/1
Subdevice #0: subdevice #0
card 0: SB [HDA ATI SB], device 1: ALC885 Digital [ALC885 Digital]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: HDMI [HDA ATI HDMI], device 3: ATI HDMI [ATI HDMI]
Subdevices: 1/1
Subdevice #0: subdevice #0


probier ich gleich mal. danke.
bei was für nem google hast du das denn gefunden? is nich das normale, oder?

[anthraxx84]

so hab jetzt alle ausprobiert die drin stehen unter 885
da ist es noch schlimmer als vorher. da hab ich gar keinen sound.


ALC882/885
3stack-dig 3-jack with SPDIF I/O
6stack-dig 6-jack digital with SPDIF I/O
arima Arima W820Di1
targa Targa T8, MSI-1049 T8
asus-a7j ASUS A7J
asus-a7m ASUS A7M
macpro MacPro support
mbp3 Macbook Pro rev3
imac24 iMac 24'' with jack detection
w2jc ASUS W2JC
auto auto-config reading BIOS (default)

da steht auch was von asus. hab aber ein gigabyte board.
macht das was aus?