Hallo zusammen,
mein Software RAID 1 unter Ubuntu wird nach dem Reboot nicht gestartet.
Es steht einfach auf "inactive" und "(S)" (Stopped) und komischerweise sehe ich auch nur eine Platte:
cat /proc/mdstat
Personalities : [linear] [multipath] [raid0] [raid1] [raid6] [raid5] [raid4] [raid10]
md0 : inactive raid1 sdc1[S]
unused devices: <none>
Nach einem Reboot gehe ich auf eine Konsole und gebe folgendes ein:
mdadm --assemble /dev/md0 /dev/sdb1 /dev/sdc1
Danach sieht wieder alles normal aus:
cat /proc/mdstat
Personalities : [linear] [multipath] [raid0] [raid1] [raid6] [raid5] [raid4] [raid10]
md0 : active raid1 sdb1[0] sdc1[1]
195358336 blocks [2/2] [UU]
unused devices: <none>
Ich habe nun die mdadm.conf anders automatisch erstellt und dachte dadurch würde das Problem behoben sein - Irrtum.
Meine mdadm.conf sieht nun folgendermaßen aus:
cat /etc/mdadm/mdadm.conf | grep -v '^#'
DEVICE partitions
CREATE owner=root group=disk mode=0660 auto=yes
HOMEHOST <system>
MAILADDR root
ARRAY /dev/md0 level=raid1 num-devices=2 metadata=00.90 UUID=5ac27af5:a97d8b03:ea3f29fa:36aabeaf
Ich verstehe nicht warum mein Raid nicht automatisch beim Systemstart geladen wird. Wie kann ich das prüfen?
Hat sich wahrscheinlich erledigt. sry.
waere nett wenn du die antwort postet, evt. hat jemand das gleiche problem...
Okay, habe meinen Post erneut bearbeitet.
edit:
fdisk -l
cat /etc/mdadm/mdadm.conf
wäre interressant
fdisk -l
fdisk -l
Platte /dev/sda: 80.0 GByte, 80026361856 Byte
255 Köpfe, 63 Sektoren/Spuren, 9729 Zylinder
Einheiten = Zylinder von 16065 × 512 = 8225280 Bytes
Disk identifier: 0xd44e8e40
Gerät boot. Anfang Ende Blöcke Id System
/dev/sda1 * 1 3824 30716248+ 7 HPFS/NTFS
/dev/sda2 3825 9729 47431912+ 5 Erweiterte
/dev/sda5 3825 9482 45447853+ 83 Linux
/dev/sda6 9483 9729 1983996 82 Linux Swap / Solaris
Platte /dev/sdb: 200.0 GByte, 200049647616 Byte
255 Köpfe, 63 Sektoren/Spuren, 24321 Zylinder
Einheiten = Zylinder von 16065 × 512 = 8225280 Bytes
Disk identifier: 0x987ea255
Gerät boot. Anfang Ende Blöcke Id System
/dev/sdb1 1 24321 195358401 fd Linux raid autodetect
Platte /dev/sdc: 200.0 GByte, 200049647616 Byte
255 Köpfe, 63 Sektoren/Spuren, 24321 Zylinder
Einheiten = Zylinder von 16065 × 512 = 8225280 Bytes
Disk identifier: 0x54a49c2e
Gerät boot. Anfang Ende Blöcke Id System
/dev/sdc1 1 24321 195358401 fd Linux raid autodetect
Platte /dev/md0: 200.0 GByte, 200046936064 Byte
2 Köpfe, 4 Sektoren/Spuren, 48839584 Zylinder
Einheiten = Zylinder von 8 × 512 = 4096 Bytes
Disk identifier: 0x00000000
Festplatte /dev/md0 enthält keine gültige Partitionstabelle
Code:
cat /etc/mdadm/mdadm.conf | grep -v '^#'
DEVICE partitions
CREATE owner=root group=disk mode=0660 auto=yes
HOMEHOST <system>
MAILADDR root
ARRAY /dev/md0 level=raid1 num-devices=2 metadata=00.90 UUID=5ac27af5:a97d8b03:ea3f29fa:36aabeaf
Festplatte /dev/md0 enthält keine gültige Partitionstabelle
Diese Meldung scheint in Ordnung zu gehen.
die ausgabe von
dmesg
wenn der fehler auftritt wäre auch noch interressant
Es geht doch noch nicht wirklich.
cat /proc/mdstat
Personalities : [linear] [multipath] [raid0] [raid1] [raid6] [raid5] [raid4] [raid10]
md0 : inactive sdc[1](S)
195360896 blocks
unused devices: <none>
[ 0.804476] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.804479] pci 0000:00:0b.0: PME# disabled
[ 0.804505] pci 0000:00:0b.1: reg 10 32bit mmio: [0xfebbfc00-0xfebbfcff]
[ 0.804528] pci 0000:00:0b.1: supports D1 D2
[ 0.804530] pci 0000:00:0b.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.804533] pci 0000:00:0b.1: PME# disabled
[ 0.804571] pci 0000:00:0d.0: reg 20 io port: [0xffa0-0xffaf]
[ 0.804608] pci 0000:00:0e.0: reg 10 io port: [0xf80-0xf87]
[ 0.804613] pci 0000:00:0e.0: reg 14 io port: [0xf00-0xf03]
[ 0.804617] pci 0000:00:0e.0: reg 18 io port: [0xe80-0xe87]
[ 0.804622] pci 0000:00:0e.0: reg 1c io port: [0xe00-0xe03]
[ 0.804626] pci 0000:00:0e.0: reg 20 io port: [0xe000-0xe00f]
[ 0.804631] pci 0000:00:0e.0: reg 24 32bit mmio: [0xfebbd000-0xfebbdfff]
[ 0.804694] pci 0000:00:10.2: reg 10 io port: [0xd800-0xd8ff]
[ 0.804699] pci 0000:00:10.2: reg 14 io port: [0xd400-0xd4ff]
[ 0.804704] pci 0000:00:10.2: reg 18 32bit mmio: [0xfebbc000-0xfebbcfff]
[ 0.804722] pci 0000:00:10.2: supports D1 D2
[ 0.804750] pci 0000:00:14.0: reg 10 32bit mmio: [0xfebbb000-0xfebbbfff]
[ 0.804755] pci 0000:00:14.0: reg 14 io port: [0xdc00-0xdc07]
[ 0.804774] pci 0000:00:14.0: supports D1 D2
[ 0.804776] pci 0000:00:14.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.804779] pci 0000:00:14.0: PME# disabled
[ 0.804944] pci 0000:03:00.0: reg 10 64bit mmio: [0xc0000000-0xcfffffff]
[ 0.804951] pci 0000:03:00.0: reg 18 64bit mmio: [0xfe9f0000-0xfe9fffff]
[ 0.804956] pci 0000:03:00.0: reg 20 io port: [0xb800-0xb8ff]
[ 0.804963] pci 0000:03:00.0: reg 30 32bit mmio: [0xfe9c0000-0xfe9dffff]
[ 0.804969] pci 0000:03:00.0: supports D1 D2
[ 0.804993] pci 0000:03:00.1: reg 10 64bit mmio: [0xfe9e0000-0xfe9effff]
[ 0.805011] pci 0000:03:00.1: supports D1 D2
[ 0.805052] pci 0000:00:04.0: bridge io port: [0xb000-0xbfff]
[ 0.805055] pci 0000:00:04.0: bridge 32bit mmio: [0xfe900000-0xfe9fffff]
[ 0.805059] pci 0000:00:04.0: bridge 64bit mmio pref: [0xbff00000-0xdfefffff]
[ 0.805094] pci 0000:04:08.0: reg 10 io port: [0xc800-0xc8ff]
[ 0.805100] pci 0000:04:08.0: reg 14 32bit mmio: [0xfeaffc00-0xfeaffcff]
[ 0.805127] pci 0000:04:08.0: supports D1 D2
[ 0.805129] pci 0000:04:08.0: PME# supported from D1 D2 D3hot
[ 0.805132] pci 0000:04:08.0: PME# disabled
[ 0.805160] pci 0000:00:10.0: transparent bridge
[ 0.805163] pci 0000:00:10.0: bridge io port: [0xc000-0xcfff]
[ 0.805167] pci 0000:00:10.0: bridge 32bit mmio: [0xfea00000-0xfeafffff]
[ 0.805178] bus 00 -> node 0
[ 0.805186] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.805525] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT]
[ 0.805651] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT]
[ 0.805775] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PA._PRT]
[ 0.805926] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[ 0.819302] ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *11
[ 0.819560] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *0, disabled.
[ 0.819813] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled.
[ 0.820093] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled.
[ 0.820346] ACPI: PCI Interrupt Link [LNEA] (IRQs 16 17 18 19) *11
[ 0.820597] ACPI: PCI Interrupt Link [LNEB] (IRQs 16 17 18 19) *0, disabled.
[ 0.820849] ACPI: PCI Interrupt Link [LNEC] (IRQs 16 17 18 19) *0, disabled.
[ 0.821101] ACPI: PCI Interrupt Link [LNED] (IRQs 16 17 18 19) *0, disabled.
[ 0.821353] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *11
[ 0.821605] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *11
[ 0.821856] ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *11
[ 0.822114] ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) *0, disabled.
[ 0.822367] ACPI: PCI Interrupt Link [LACI] (IRQs 20 21 22 23) *11
[ 0.822619] ACPI: PCI Interrupt Link [LMC9] (IRQs 20 21 22 23) *0, disabled.
[ 0.822871] ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *11
[ 0.823132] ACPI: PCI Interrupt Link [LPMU] (IRQs 20 21 22 23) *5
[ 0.823391] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *10
[ 0.823648] ACPI: PCI Interrupt Link [LSA1] (IRQs 20 21 22 23) *0, disabled.
[ 0.823946] ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0, disabled.
[ 0.824103] ACPI Warning (tbutils-0217): Incorrect checksum in table [OEMB] - D1, should be CB [20080926]
[ 0.824130] ACPI: WMI: Mapper loaded
[ 0.824348] SCSI subsystem initialized
[ 0.824396] libata version 3.00 loaded.
[ 0.824452] usbcore: registered new interface driver usbfs
[ 0.824473] usbcore: registered new interface driver hub
[ 0.824504] usbcore: registered new device driver usb
[ 0.824618] PCI: Using ACPI for IRQ routing
[ 0.860009] Bluetooth: Core ver 2.13
[ 0.860071] NET: Registered protocol family 31
[ 0.860073] Bluetooth: HCI device and connection manager initialized
[ 0.860076] Bluetooth: HCI socket layer initialized
[ 0.860078] NET: Registered protocol family 8
[ 0.860080] NET: Registered protocol family 20
[ 0.860091] NetLabel: Initializing
[ 0.860092] NetLabel: domain hash size = 128
[ 0.860094] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.860110] NetLabel: unlabeled traffic allowed by default
[ 0.860345] AppArmor: AppArmor Filesystem Enabled
[ 0.890010] pnp: PnP ACPI init
[ 0.890028] ACPI: bus type pnp registered
[ 0.896711] pnp: PnP ACPI: found 14 devices
[ 0.896715] ACPI: ACPI bus type pnp unregistered
[ 0.896733] system 00:07: ioport range 0x4d0-0x4d1 has been reserved
[ 0.896736] system 00:07: ioport range 0x800-0x80f has been reserved
[ 0.896739] system 00:07: ioport range 0x4000-0x407f has been reserved
[ 0.896741] system 00:07: ioport range 0x4080-0x40ff has been reserved
[ 0.896744] system 00:07: ioport range 0x4400-0x447f has been reserved
[ 0.896746] system 00:07: ioport range 0x4480-0x44ff has been reserved
[ 0.896749] system 00:07: ioport range 0x4800-0x487f has been reserved
[ 0.896751] system 00:07: ioport range 0x4880-0x48ff has been reserved
[ 0.896754] system 00:07: ioport range 0x2000-0x207f has been reserved
[ 0.896756] system 00:07: ioport range 0x2080-0x20ff has been reserved
[ 0.896760] system 00:07: iomem range 0xfefe0000-0xfefe01ff has been reserved
[ 0.896762] system 00:07: iomem range 0xfee01000-0xfeefffff has been reserved
[ 0.896768] system 00:08: iomem range 0xfec00000-0xfec00fff has been reserved
[ 0.896771] system 00:08: iomem range 0xfee00000-0xfee00fff has been reserved
[ 0.896773] system 00:08: iomem range 0xfebc0000-0xfebfffff has been reserved
[ 0.896780] system 00:0b: ioport range 0x290-0x29f has been reserved
[ 0.896785] system 00:0c: iomem range 0xe0000000-0xefffffff has been reserved
[ 0.896790] system 00:0d: iomem range 0x0-0x9ffff could not be reserved
[ 0.896792] system 00:0d: iomem range 0xc0000-0xcffff has been reserved
[ 0.896795] system 00:0d: iomem range 0xe0000-0xfffff could not be reserved
[ 0.896797] system 00:0d: iomem range 0x100000-0x7fffffff could not be reserved
[ 0.896800] system 00:0d: iomem range 0xff000000-0xffffffff has been reserved
[ 0.901572] pci 0000:00:02.0: PCI bridge, secondary bus 0000:01
[ 0.901575] pci 0000:00:02.0: IO window: disabled
[ 0.901578] pci 0000:00:02.0: MEM window: disabled
[ 0.901581] pci 0000:00:02.0: PREFETCH window: disabled
[ 0.901584] pci 0000:00:03.0: PCI bridge, secondary bus 0000:02
[ 0.901586] pci 0000:00:03.0: IO window: disabled
[ 0.901588] pci 0000:00:03.0: MEM window: disabled
[ 0.901590] pci 0000:00:03.0: PREFETCH window: disabled
[ 0.901595] pci 0000:00:04.0: PCI bridge, secondary bus 0000:03
[ 0.901597] pci 0000:00:04.0: IO window: 0xb000-0xbfff
[ 0.901600] pci 0000:00:04.0: MEM window: 0xfe900000-0xfe9fffff
[ 0.901603] pci 0000:00:04.0: PREFETCH window: 0x000000bff00000-0x000000dfefffff
[ 0.901607] pci 0000:00:10.0: PCI bridge, secondary bus 0000:04
[ 0.901609] pci 0000:00:10.0: IO window: 0xc000-0xcfff
[ 0.901613] pci 0000:00:10.0: MEM window: 0xfea00000-0xfeafffff
[ 0.901616] pci 0000:00:10.0: PREFETCH window: disabled
[ 0.901627] pci 0000:00:02.0: setting latency timer to 64
[ 0.901631] pci 0000:00:03.0: setting latency timer to 64
[ 0.901636] pci 0000:00:04.0: setting latency timer to 64
[ 0.901640] pci 0000:00:10.0: setting latency timer to 64
[ 0.901644] bus: 00 index 0 io port: [0x00-0xffff]
[ 0.901646] bus: 00 index 1 mmio: [0x000000-0xffffffffffffffff]
[ 0.901648] bus: 01 index 0 mmio: [0x0-0x0]
[ 0.901650] bus: 01 index 1 mmio: [0x0-0x0]
[ 0.901651] bus: 01 index 2 mmio: [0x0-0x0]
[ 0.901653] bus: 01 index 3 mmio: [0x0-0x0]
[ 0.901655] bus: 02 index 0 mmio: [0x0-0x0]
[ 0.901656] bus: 02 index 1 mmio: [0x0-0x0]
[ 0.901658] bus: 02 index 2 mmio: [0x0-0x0]
[ 0.901660] bus: 02 index 3 mmio: [0x0-0x0]
[ 0.901661] bus: 03 index 0 io port: [0xb000-0xbfff]
[ 0.901663] bus: 03 index 1 mmio: [0xfe900000-0xfe9fffff]
[ 0.901665] bus: 03 index 2 mmio: [0xbff00000-0xdfefffff]
[ 0.901667] bus: 03 index 3 mmio: [0x0-0x0]
[ 0.901669] bus: 04 index 0 io port: [0xc000-0xcfff]
[ 0.901671] bus: 04 index 1 mmio: [0xfea00000-0xfeafffff]
[ 0.901672] bus: 04 index 2 mmio: [0x0-0x0]
[ 0.901674] bus: 04 index 3 io port: [0x00-0xffff]
[ 0.901676] bus: 04 index 4 mmio: [0x000000-0xffffffffffffffff]
[ 0.901693] NET: Registered protocol family 2
[ 0.910020] Switched to high resolution mode on CPU 0
[ 0.990080] IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.990894] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
[ 0.995395] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.996527] TCP: Hash tables configured (established 262144 bind 65536)
[ 0.996531] TCP reno registered
[ 1.020128] NET: Registered protocol family 1
[ 1.020265] checking if image is initramfs... it is
[ 1.721134] Freeing initrd memory: 8485k freed
[ 1.731162] audit: initializing netlink socket (disabled)
[ 1.731180] type=2000 audit(1255122210.730:1): initialized
[ 1.740027] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.741404] VFS: Disk quotas dquot_6.5.1
[ 1.741480] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.742132] fuse init (API version 7.10)
[ 1.742222] msgmni has been set to 3972
[ 1.742453] alg: No test for stdrng (krng)
[ 1.742467] io scheduler noop registered
[ 1.742469] io scheduler anticipatory registered
[ 1.742471] io scheduler deadline registered (default)
[ 1.742541] io scheduler cfq registered
[ 1.742558] pci 0000:00:00.0: Enabling HT MSI Mapping
[ 1.742596] pci 0000:00:02.0: Enabling HT MSI Mapping
[ 1.742606] pci 0000:00:03.0: Enabling HT MSI Mapping
[ 1.742616] pci 0000:00:04.0: Enabling HT MSI Mapping
[ 1.742639] pci 0000:00:09.0: Enabling HT MSI Mapping
[ 1.742716] pci 0000:00:0e.0: Enabling HT MSI Mapping
[ 1.742726] pci 0000:00:10.0: Enabling HT MSI Mapping
[ 1.742748] pci 0000:03:00.0: Boot video device
[ 1.749868] pcieport-driver 0000:00:02.0: setting latency timer to 64
[ 1.749893] pcieport-driver 0000:00:02.0: found MSI capability
[ 1.749912] pcieport-driver 0000:00:02.0: irq 2303 for MSI/MSI-X
[ 1.749919] pci_express 0000:00:02.0:pcie00: allocate port service
[ 1.749936] pci_express 0000:00:02.0:pcie03: allocate port service
[ 1.749971] pcieport-driver 0000:00:03.0: setting latency timer to 64
[ 1.749993] pcieport-driver 0000:00:03.0: found MSI capability
[ 1.750044] pcieport-driver 0000:00:03.0: irq 2302 for MSI/MSI-X
[ 1.750050] pci_express 0000:00:03.0:pcie00: allocate port service
[ 1.750062] pci_express 0000:00:03.0:pcie03: allocate port service
[ 1.750097] pcieport-driver 0000:00:04.0: setting latency timer to 64
[ 1.750119] pcieport-driver 0000:00:04.0: found MSI capability
[ 1.750131] pcieport-driver 0000:00:04.0: irq 2301 for MSI/MSI-X
[ 1.750138] pci_express 0000:00:04.0:pcie00: allocate port service
[ 1.750149] pci_express 0000:00:04.0:pcie03: allocate port service
[ 1.750209] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.750217] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.750350] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 1.750353] ACPI: Power Button (FF) [PWRF]
[ 1.750409] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[ 1.750412] ACPI: Power Button (CM) [PWRB]
[ 1.750709] processor ACPI_CPU:00: registered as cooling_device0
[ 1.800220] Linux agpgart interface v0.103
[ 1.800235] Serial: 8250/16550 driver4 ports, IRQ sharing enabled
[ 1.800345] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.800659] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.801431] brd: module loaded
[ 1.801764] loop: module loaded
[ 1.801894] Fixed MDIO Bus: probed
[ 1.801901] PPP generic driver version 2.4.2
[ 1.801963] input: Macintosh mouse button emulation as /devices/virtual/input/input2
[ 1.802005] Driver 'sd' needs updating - please use bus_type methods
[ 1.802017] Driver 'sr' needs updating - please use bus_type methods
[ 1.802220] sata_nv 0000:00:0e.0: version 3.5
[ 1.802630] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 23
[ 1.802644] sata_nv 0000:00:0e.0: PCI INT A -> Link[LSA0] -> GSI 23 (level, low) -> IRQ 23
[ 1.802647] sata_nv 0000:00:0e.0: Using SWNCQ mode
[ 1.802715] sata_nv 0000:00:0e.0: setting latency timer to 64
[ 1.802950] scsi0 : sata_nv
[ 1.803094] scsi1 : sata_nv
[ 1.803284] ata1: SATA max UDMA/133 cmd 0xf80 ctl 0xf00 bmdma 0xe000 irq 23
[ 1.803288] ata2: SATA max UDMA/133 cmd 0xe80 ctl 0xe00 bmdma 0xe008 irq 23
[ 2.710055] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.730202] ata1.00: ATAPI: HL-DT-ST DVDRAM GH22NS50, TN00, max UDMA/100
[ 2.770206] ata1.00: configured for UDMA/100
[ 3.530589] ata2: SATA link down (SStatus 0 SControl 300)
[ 3.530631] isa bounce pool size: 16 pages
[ 3.534156] scsi 0:0:0:0: CD-ROM HL-DT-ST DVDRAM GH22NS50 TN00 PQ: 0 ANSI: 5
[ 3.538634] sr0: scsi3-mmc drive: 10x/10x writer dvd-ram cd/rw xa/form2 cdda tray
[ 3.538638] Uniform CD-ROM driver Revision: 3.20
[ 3.538771] sr 0:0:0:0: Attached scsi CD-ROM sr0
[ 3.538822] sr 0:0:0:0: Attached scsi generic sg0 type 5
[ 3.538919] pata_amd 0000:00:0d.0: version 0.3.10
[ 3.538973] pata_amd 0000:00:0d.0: setting latency timer to 64
[ 3.539098] scsi2 : pata_amd
[ 3.539178] scsi3 : pata_amd
[ 3.541057] ata3: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
[ 3.541060] ata4: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
[ 5.900526] ata3.00: ATA-6: ST380011A, 8.10, max UDMA/100
[ 5.900529] ata3.00: 156301488 sectors, multi 16: LBA48
[ 5.900554] ata3.01: ATAPI: TSSTcorpDVD-ROM SH-D162C, TS04, max UDMA/33
[ 5.900578] ata3: nv_mode_filter: 0x3f39f&0x3f01f->0x3f01f, BIOS=0x3f000 (0xc6c0c6c6) ACPI=0x3f01f (20:60:0x15)
[ 5.900583] ata3: nv_mode_filter: 0x739f&0x701f->0x701f, BIOS=0x7000 (0xc6c0c6c6) ACPI=0x701f (20:60:0x15)
[ 5.940463] ata3.00: configured for UDMA/100
[ 5.980271] ata3.01: configured for UDMA/33
[ 6.180432] ata4.00: ATA-7: SAMSUNG SP2014N, VC100-33, max UDMA/100
[ 6.180434] ata4.00: 390721968 sectors, multi 16: LBA48
[ 6.180592] ata4.01: ATA-7: SAMSUNG SP2014N, VC100-50, max UDMA/100
[ 6.180595] ata4.01: 390721968 sectors, multi 16: LBA48
[ 6.180614] ata4: nv_mode_filter: 0x3f39f&0x3f01f->0x3f01f, BIOS=0x3f000 (0xc6c0c6c6) ACPI=0x3f01f (20:20:0x15)
[ 6.180618] ata4: nv_mode_filter: 0x3f39f&0x3f01f->0x3f01f, BIOS=0x3f000 (0xc6c0c6c6) ACPI=0x3f01f (20:20:0x15)
[ 6.200375] ata4.00: configured for UDMA/100
[ 6.240378] ata4.01: configured for UDMA/100
[ 6.240481] scsi 2:0:0:0: Direct-Access ATA ST380011A 8.10 PQ: 0 ANSI: 5
[ 6.240613] sd 2:0:0:0: [sda] 156301488 512-byte hardware sectors: (80.0 GB/74.5 GiB)
[ 6.240630] sd 2:0:0:0: [sda] Write Protect is off
[ 6.240632] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 6.240656] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 6.240727] sd 2:0:0:0: [sda] 156301488 512-byte hardware sectors: (80.0 GB/74.5 GiB)
[ 6.240740] sd 2:0:0:0: [sda] Write Protect is off
[ 6.240742] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 6.240765] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 6.240769] sda: sda1 sda2 < sda5 sda6 >
[ 6.289228] sd 2:0:0:0: [sda] Attached SCSI disk
[ 6.289283] sd 2:0:0:0: Attached scsi generic sg1 type 0
[ 6.289879] scsi 2:0:1:0: CD-ROM TSSTcorp DVD-ROM SH-D162C TS04 PQ: 0 ANSI: 5
[ 6.319071] sr1: scsi3-mmc drive: 48x/48x cd/rw xa/form2 cdda tray
[ 6.319168] sr 2:0:1:0: Attached scsi CD-ROM sr1
[ 6.319219] sr 2:0:1:0: Attached scsi generic sg2 type 5
[ 6.319310] scsi 3:0:0:0: Direct-Access ATA SAMSUNG SP2014N VC10 PQ: 0 ANSI: 5
[ 6.319414] sd 3:0:0:0: [sdb] 390721968 512-byte hardware sectors: (200 GB/186 GiB)
[ 6.319430] sd 3:0:0:0: [sdb] Write Protect is off
[ 6.319433] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 6.319456] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 6.319524] sd 3:0:0:0: [sdb] 390721968 512-byte hardware sectors: (200 GB/186 GiB)
[ 6.319537] sd 3:0:0:0: [sdb] Write Protect is off
[ 6.319539] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 6.319562] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 6.319567] sdb: sdb1
[ 6.370293] sd 3:0:0:0: [sdb] Attached SCSI disk
[ 6.370349] sd 3:0:0:0: Attached scsi generic sg3 type 0
[ 6.370450] scsi 3:0:1:0: Direct-Access ATA SAMSUNG SP2014N VC10 PQ: 0 ANSI: 5
[ 6.370549] sd 3:0:1:0: [sdc] 390721968 512-byte hardware sectors: (200 GB/186 GiB)
[ 6.370566] sd 3:0:1:0: [sdc] Write Protect is off
[ 6.370568] sd 3:0:1:0: [sdc] Mode Sense: 00 3a 00 00
[ 6.370591] sd 3:0:1:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 6.370657] sd 3:0:1:0: [sdc] 390721968 512-byte hardware sectors: (200 GB/186 GiB)
[ 6.370671] sd 3:0:1:0: [sdc] Write Protect is off
[ 6.370673] sd 3:0:1:0: [sdc] Mode Sense: 00 3a 00 00
[ 6.370695] sd 3:0:1:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 6.370699] sdc: sdc1
[ 6.378295] sd 3:0:1:0: [sdc] Attached SCSI disk
[ 6.378348] sd 3:0:1:0: Attached scsi generic sg4 type 0
[ 6.378797] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 6.379219] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 22
[ 6.379232] ehci_hcd 0000:00:0b.1: PCI INT B -> Link[LUB2] -> GSI 22 (level, low) -> IRQ 22
[ 6.379255] ehci_hcd 0000:00:0b.1: setting latency timer to 64
[ 6.379258] ehci_hcd 0000:00:0b.1: EHCI Host Controller
[ 6.379351] ehci_hcd 0000:00:0b.1: new USB bus registered, assigned bus number 1
[ 6.379386] ehci_hcd 0000:00:0b.1: debug port 1
[ 6.379391] ehci_hcd 0000:00:0b.1: cache line size of 64 is not supported
[ 6.379415] ehci_hcd 0000:00:0b.1: irq 22, io mem 0xfebbfc00
[ 6.390022] ehci_hcd 0000:00:0b.1: USB 2.0 started, EHCI 1.00
[ 6.390109] usb usb1: configuration #1 chosen from 1 choice
[ 6.390139] hub 1-0:1.0: USB hub found
[ 6.390149] hub 1-0:1.0: 8 ports detected
[ 6.390277] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 6.390699] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 21
[ 6.390712] ohci_hcd 0000:00:0b.0: PCI INT A -> Link[LUB0] -> GSI 21 (level, low) -> IRQ 21
[ 6.390736] ohci_hcd 0000:00:0b.0: setting latency timer to 64
[ 6.390739] ohci_hcd 0000:00:0b.0: OHCI Host Controller
[ 6.390817] ohci_hcd 0000:00:0b.0: new USB bus registered, assigned bus number 2
[ 6.390856] ohci_hcd 0000:00:0b.0: irq 21, io mem 0xfebbe000
[ 6.452111] usb usb2: configuration #1 chosen from 1 choice
[ 6.452138] hub 2-0:1.0: USB hub found
[ 6.452148] hub 2-0:1.0: 8 ports detected
[ 6.452262] uhci_hcd: USB Universal Host Controller Interface driver
[ 6.452361] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 6.452363] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 6.452762] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 6.480052] mice: PS/2 mouse device common for all mice
[ 6.570082] rtc_cmos 00:02: RTC can wake from S4
[ 6.570127] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 6.570162] rtc0: alarms up to one year, y3k, 114 bytes nvram
[ 6.570245] device-mapper: uevent: version 1.0.3
[ 6.570402] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
[ 6.570460] device-mapper: multipath: version 1.0.5 loaded
[ 6.570463] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 6.570539] cpuidle: using governor ladder
[ 6.570541] cpuidle: using governor menu
[ 6.571017] TCP cubic registered
[ 6.571096] NET: Registered protocol family 10
[ 6.571501] lo: Disabled Privacy Extensions
[ 6.571792] NET: Registered protocol family 17
[ 6.571824] Bluetooth: L2CAP ver 2.11
[ 6.571826] Bluetooth: L2CAP socket layer initialized
[ 6.571828] Bluetooth: SCO (Voice Link) ver 0.6
[ 6.571830] Bluetooth: SCO socket layer initialized
[ 6.571897] Bluetooth: RFCOMM socket layer initialized
[ 6.571906] Bluetooth: RFCOMM TTY layer initialized
[ 6.571908] Bluetooth: RFCOMM ver 1.10
[ 6.571956] powernow-k8: Found 1 AMD Sempron(tm) Processor 3000+ processors (1 cpu cores) (version 2.20.00)
[ 6.572000] powernow-k8: 0 : fid 0xa (1800 MHz), vid 0x6
[ 6.572002] powernow-k8: 1 : fid 0x2 (1000 MHz), vid 0xa
[ 6.572154] registered taskstats version 1
[ 6.572315] Magic number: 13:441:95
[ 6.572349] pci_express 0000:00:03.0:pcie03: hash matches
[ 6.572408] rtc_cmos 00:02: setting system clock to 2009-10-09 21:03:36 UTC (1255122216)
[ 6.572411] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 6.572413] EDD information not available.
[ 6.572478] Freeing unused kernel memory: 536k freed
[ 6.572994] Write protecting the kernel read-only data: 6688k
[ 6.611891] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[ 6.982738] md: linear personality registered for level -1
[ 7.000036] usb 2-1: new low speed USB device using ohci_hcd and address 2
[ 7.003185] md: multipath personality registered for level -4
[ 7.022809] md: raid0 personality registered for level 0
[ 7.044186] md: raid1 personality registered for level 1
[ 7.062640] xor: automatically using best checksumming function: generic_sse
[ 7.110012] generic_sse: 5333.600 MB/sec
[ 7.110014] xor: using function: generic_sse (5333.600 MB/sec)
[ 7.171442] async_tx: api initialized (async)
[ 7.340025] raid6: int64x1 1503 MB/s
[ 7.510024] raid6: int64x2 2080 MB/s
[ 7.680043] raid6: int64x4 1655 MB/s
[ 7.850026] raid6: int64x8 1517 MB/s
[ 8.020017] raid6: sse2x1 2152 MB/s
[ 8.190022] raid6: sse2x2 2993 MB/s
[ 8.360022] raid6: sse2x4 3178 MB/s
[ 8.360024] raid6: using algorithm sse2x4 (3178 MB/s)
[ 8.360028] md: raid6 personality registered for level 6
[ 8.360030] md: raid5 personality registered for level 5
[ 8.360031] md: raid4 personality registered for level 4
[ 8.408125] usb 2-1: configuration #1 chosen from 1 choice
[ 8.618633] md: raid10 personality registered for level 10
[ 8.791057] usbcore: registered new interface driver hiddev
[ 8.798520] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:0b.0/usb2/2-1/2-1:1.0/input/input4
[ 8.850183] generic-usb 0003:046D:C050.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:0b.0-1/input0
[ 8.850207] usbcore: registered new interface driver usbhid
[ 8.850210] usbhid: v2.6:USB HID core driver
[ 8.893123] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[ 8.893157] 8139cp 0000:04:08.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too
[ 8.897035] 8139too Fast Ethernet driver 0.9.28
[ 8.905473] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 19
[ 8.905491] 8139too 0000:04:08.0: PCI INT A -> Link[LNKA] -> GSI 19 (level, low) -> IRQ 19
[ 8.906496] eth0: RealTek RTL8139 at 0xc800, 00:00:1c:db:ee:22, IRQ 19
[ 8.906500] eth0: Identified 8139 chip type 'RTL-8139B'
[ 8.914060] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.61.
[ 8.914471] ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 20
[ 8.914485] forcedeth 0000:00:14.0: PCI INT A -> Link[LMAC] -> GSI 20 (level, low) -> IRQ 20
[ 8.914490] forcedeth 0000:00:14.0: setting latency timer to 64
[ 8.914761] nv_probe: set workaround bit for reversed mac addr
[ 8.975962] md: bind<sdc>
[ 9.441076] forcedeth 0000:00:14.0: ifname eth1, PHY OUI 0x732 @ 1, addr 00:13:8f:87:8c:c2
[ 9.441081] forcedeth 0000:00:14.0: highdma pwrctl timirq lnktim desc-v3
[ 9.564074] PM: Starting manual resume from disk
[ 9.564080] PM: Resume from partition 8:6
[ 9.564082] PM: Checking hibernation image.
[ 9.564336] PM: Resume from disk failed.
[ 9.611516] kjournald starting. Commit interval 5 seconds
[ 9.611536] EXT3-fs: mounted filesystem with ordered data mode.
[ 15.699824] udev: starting version 141
[ 15.902254] parport_pc 00:05: reported by Plug and Play ACPI
[ 15.902316] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
[ 15.965032] i2c-adapter i2c-0: nForce2 SMBus adapter at 0x5000
[ 15.965051] i2c-adapter i2c-1: nForce2 SMBus adapter at 0x6000
[ 16.102524] udev: renamed network interface eth1 to eth0
[ 16.146809] udev: renamed network interface eth0_rename to eth1
[ 17.139185] ppdev: user-space parallel port driver
[ 17.509884] Ethernet Channel Bonding Driver: v3.3.0 (June 10, 2008)
[ 17.509891] bonding: MII link monitoring set to 100 ms
[ 17.530358] bonding: lo is being created...
[ 17.533635] bonding: Bond creation failed.
[ 17.832571] ACPI: PCI Interrupt Link [LACI] enabled at IRQ 23
[ 17.832580] Intel ICH 0000:00:10.2: PCI INT C -> Link[LACI] -> GSI 23 (level, low) -> IRQ 23
[ 17.832767] Intel ICH 0000:00:10.2: setting latency timer to 64
[ 18.170029] intel8x0_measure_ac97_clock: measured 50594 usecs
[ 18.170033] intel8x0: clocking to 46853
[ 18.350816] lp0: using parport0 (interrupt-driven).
[ 18.484655] Adding 1983988k swap on /dev/sda6. Priority:-1 extents:1 across:1983988k
[ 36.052790] EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
[ 36.053036] EXT3 FS on sda5, internal journal
[ 37.072714] ReiserFS: md0: warning: sh-2006: read_super_block: bread failed (dev md0, block 2, size 4096)
[ 37.072723] ReiserFS: md0: warning: sh-2006: read_super_block: bread failed (dev md0, block 16, size 4096)
[ 37.072727] ReiserFS: md0: warning: sh-2021: reiserfs_fill_super: can not find reiserfs on md0
[ 37.477923] type=1505 audit(1255115047.397:2): operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" name2="default" pid=2231
[ 37.537599] type=1505 audit(1255115047.457:3): operation="profile_load" name="/sbin/dhclient-script" name2="default" pid=2235
[ 37.537802] type=1505 audit(1255115047.457:4): operation="profile_load" name="/sbin/dhclient3" name2="default" pid=2235
[ 37.537879] type=1505 audit(1255115047.457:5): operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" name2="default" pid=2235
[ 37.537937] type=1505 audit(1255115047.457:6): operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" name2="default" pid=2235
[ 37.695726] type=1505 audit(1255115047.617:7): operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" name2="default" pid=2240
[ 37.696020] type=1505 audit(1255115047.617:8): operation="profile_load" name="/usr/sbin/cupsd" name2="default" pid=2240
[ 37.734517] type=1505 audit(1255115047.657:9): operation="profile_load" name="/usr/sbin/tcpdump" name2="default" pid=2244
[ 46.385735] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 46.385739] Bluetooth: BNEP filters: protocol multicast
[ 46.411613] Bridge firewalling registered
[ 47.869845] ACPI: PCI Interrupt Link [LNEA] enabled at IRQ 18
[ 47.869862] pci 0000:03:00.0: PCI INT A -> Link[LNEA] -> GSI 18 (level, low) -> IRQ 18
[ 48.156832] [drm] Initialized drm 1.1.0 20060810
[ 48.347346] pci 0000:03:00.0: setting latency timer to 64
[ 48.347544] [drm] Initialized radeon 1.29.0 20080528 on minor 0
[ 49.041057] [drm] Setting GART location based on new memory map
[ 49.041331] [drm] Loading R500 Microcode
[ 49.041550] [drm] Num pipes: 4
[ 49.041559] [drm] writeback test succeeded in 1 usecs
[ 52.076329] eth1: link up, 100Mbps, full-duplex, lpa 0x45E1
[ 62.400032] eth1: no IPv6 routers present
[ 62.550027] eth0: no IPv6 routers present
[ 73.024017] UDF-fs: No VRS found
[ 110.900035] Clocksource tsc unstable (delta = -222316601 ns)
mdadm --assemble /dev/md0 /dev/sdb1 /dev/sdc1
mdadm: metadata format 00.90 unknown, ignored.
mdadm: /dev/md0 has been started with 2 drives.
cat /proc/mdstat
Personalities : [linear] [multipath] [raid0] [raid1] [raid6] [raid5] [raid4] [raid10]
md0 : active raid1 sdb1[0] sdc1[1]
195358336 blocks [2/2] [UU]
unused devices: <none>
[ 36.053036]
[ 37.072714] ReiserFS: md0: warning: sh-2006: read_super_block: bread failed (dev md0, block 2, size 4096)
[ 37.072723] ReiserFS: md0: warning: sh-2006: read_super_block: bread failed (dev md0, block 16, size 4096)
[ 37.072727] ReiserFS: md0: warning: sh-2021: reiserfs_fill_super: can not find reiserfs on md0
Hast Du wirklich ein ReiserFS als Dateisystem?
Wundert mich das Du die Dateisysteme gemischt hast...
mfg
cane
entferne mal aus deiner mdadm.conf folgenden teil:
metadata=00.90
edit:
die initramfs danach aktualisieren...
Hi,
das hat etwas gebracht. Gibt jetzt keine Probleme mehr.
Habe ich dadurch Nachteile?
nein. der raidtreiber erkennt automatisch welche headerversion er nehmen muss.
der einzige nachteil liegt höchstens an dem 0.9er header, allerdings könnte ich jetzt keine nennen.
Powered by vBulletin® Version 4.2.5 Copyright ©2024 Adduco Digital e.K. und vBulletin Solutions, Inc. Alle Rechte vorbehalten.