merkur39
07.06.09, 13:50
hallo,
ich versuche gerade meinen bluetooth stick in betrieb zu nehmen und weiss nicht recht, wo ich anfangen soll. :confused: :confused:
hab suse 11.1 kernel 2.6.27.21
"Hama" bluetooth usb stick
die bash sagt folgendes:
lsusb -t
5-2:1.2: No such file or directory
/: Bus 05.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M
|__ Port 1: Dev 2, If 0, Class=HID, Driver=usbhid, 1.5M
|__ Port 2: Dev 4, If 0, Class='bInterfaceClass 0xe0 not yet handled', Driver=btusb, 12M
|__ Port 2: Dev 4, If 1, Class='bInterfaceClass 0xe0 not yet handled', Driver=btusb, 12M
|__ Port 2: Dev 4, If 2, Class=app., Driver=, 12M
/: Bus 04.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M
/: Bus 03.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M
/: Bus 02.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M
/: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=ehci_hcd/8p, 480M
lsusb
Bus 005 Device 004: ID 1131:1001 Integrated System Solution Corp. KY-BT100 Bluetooth Adapter
Bus 005 Device 002: ID 046d:c016 Logitech, Inc. M-UV69a/HP M-UV96 Optical Wheel Mouse
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
hwinfo --bluetooth
07: USB 00.0: 11500 Bluetooth Device
[Created at usb.122]
UDI: /org/freedesktop/Hal/devices/usb_device_1131_1001_noserial_if0
Unique ID: wn1q.Vw1vgumYcR4
Parent ID: 2XnU.CCckIHJirFC
SysFS ID: /devices/pci0000:00/0000:00:1d.3/usb5/5-2/5-2:1.0
SysFS BusID: 5-2:1.0
Hardware Class: bluetooth
Model: "Integrated System Solution KY-BT100 Bluetooth Adapter"
Hotplug: USB
Vendor: usb 0x1131 "Integrated System Solution Corp."
Device: usb 0x1001 "KY-BT100 Bluetooth Adapter"
Revision: "3.73"
Driver: "btusb"
Driver Modules: "btusb"
Speed: 12 Mbps
Module Alias: "usb:v1131p1001d0373dcE0dsc01dp01icE0isc01ip01"
Driver Info #0:
Driver Status: btusb is active
Driver Activation Cmd: "modprobe btusb"
Driver Info #1:
Driver Status: hci_usb is active
Driver Activation Cmd: "modprobe hci_usb"
Config Status: cfg=new, avail=yes, need=no, active=unknown
Attached to: #5 (Hub)
##########################
##########################
Habe dazu kbluemon installiert. wenn ich es ausführe kommt
No Bluetooth Adapter found!
Unable to start kbluemon.
Check your Bluetooth Adapter or restart the bluetooth service.
die bash sagt folgendes:
kbluemon
name@linux-3im8:~> KCrash: Application 'kbluemon' crashing...
KCrash cannot reach kdeinit, launching directly.
Hat jemand ne' Idee? (bestimmt :D )
Danke schonmal :)
ich versuche gerade meinen bluetooth stick in betrieb zu nehmen und weiss nicht recht, wo ich anfangen soll. :confused: :confused:
hab suse 11.1 kernel 2.6.27.21
"Hama" bluetooth usb stick
die bash sagt folgendes:
lsusb -t
5-2:1.2: No such file or directory
/: Bus 05.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M
|__ Port 1: Dev 2, If 0, Class=HID, Driver=usbhid, 1.5M
|__ Port 2: Dev 4, If 0, Class='bInterfaceClass 0xe0 not yet handled', Driver=btusb, 12M
|__ Port 2: Dev 4, If 1, Class='bInterfaceClass 0xe0 not yet handled', Driver=btusb, 12M
|__ Port 2: Dev 4, If 2, Class=app., Driver=, 12M
/: Bus 04.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M
/: Bus 03.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M
/: Bus 02.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M
/: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=ehci_hcd/8p, 480M
lsusb
Bus 005 Device 004: ID 1131:1001 Integrated System Solution Corp. KY-BT100 Bluetooth Adapter
Bus 005 Device 002: ID 046d:c016 Logitech, Inc. M-UV69a/HP M-UV96 Optical Wheel Mouse
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
hwinfo --bluetooth
07: USB 00.0: 11500 Bluetooth Device
[Created at usb.122]
UDI: /org/freedesktop/Hal/devices/usb_device_1131_1001_noserial_if0
Unique ID: wn1q.Vw1vgumYcR4
Parent ID: 2XnU.CCckIHJirFC
SysFS ID: /devices/pci0000:00/0000:00:1d.3/usb5/5-2/5-2:1.0
SysFS BusID: 5-2:1.0
Hardware Class: bluetooth
Model: "Integrated System Solution KY-BT100 Bluetooth Adapter"
Hotplug: USB
Vendor: usb 0x1131 "Integrated System Solution Corp."
Device: usb 0x1001 "KY-BT100 Bluetooth Adapter"
Revision: "3.73"
Driver: "btusb"
Driver Modules: "btusb"
Speed: 12 Mbps
Module Alias: "usb:v1131p1001d0373dcE0dsc01dp01icE0isc01ip01"
Driver Info #0:
Driver Status: btusb is active
Driver Activation Cmd: "modprobe btusb"
Driver Info #1:
Driver Status: hci_usb is active
Driver Activation Cmd: "modprobe hci_usb"
Config Status: cfg=new, avail=yes, need=no, active=unknown
Attached to: #5 (Hub)
##########################
##########################
Habe dazu kbluemon installiert. wenn ich es ausführe kommt
No Bluetooth Adapter found!
Unable to start kbluemon.
Check your Bluetooth Adapter or restart the bluetooth service.
die bash sagt folgendes:
kbluemon
name@linux-3im8:~> KCrash: Application 'kbluemon' crashing...
KCrash cannot reach kdeinit, launching directly.
Hat jemand ne' Idee? (bestimmt :D )
Danke schonmal :)