Abstürze bei Installation von Opensuse 11.1

[Simpel]

Hallo,

ich habe meinen Nachbarn Linux schmackhaft gemacht und wollte es jetzt neben XP installieren. Das System hat einen AMD Athlon 64 Processor 3000+ mit Nvidia Grafikkarte, 10 GB sind für root und 15 GB sind für /home vorgesehen.
Nachdem sich das System während der Installation das erste mal aufgehängt hatte habe ich den Arbeitsspeicher von 500 auf 1000 Mb erweitert da ich dachte es liegt daran. Die Rootpartition noch mal neu formatiert und neu installiert bin ich jetzt schon so weit gekommen, dass sich das System über das Internet aktualisiert. Dann stand wieder alles still, nur Caps lock und Scroll lock Lampen blinken. Und das mehrmals, es hängt immer wieder an einer anderen Stelle.
Die DVD habe ich überprüft, alles i. O. Das gleiche System habe ich bei mir auch aufgesetzt, mit ähnlicher Hardware.
Ich würde ja auf einen defekten Arbeitsspeicher tippen aber müsste XP da nicht auch ab und zu mal abstürzen?
Gruß
Torsten

[Wene]

Ich würde ja auf einen defekten Arbeitsspeicher tippen aber müsste XP da nicht auch ab und zu mal abstürzen?

Dieser Verdacht kommt bei mir auch auf. Teste es auf jeden Fall mal eine Nacht lang mit memtest durch.

Windows XP hat ein ganz anderes Speichermanagement als Linux.
Unter Linux gilt: nicht verwendeter Speicher ist verschwendeter Speicher. So wird möglichst viel des freien Speichers als Cache verwendet.
Windows XP hingegen verwendet nur was gerade von den Prozessen angefordert wird.

[Simpel]

Ja werde ich mal machen. Da ich schon dran rumgefummelt habe und bei XP alles läuft sieht es jetzt bloß wieder aus aus als hätte ich was kaputt gemacht... :o
Läuft die 11.1 auch mit 500 Mb?

[Wene]

Sollte. Siehe http://en.opensuse.org/Sysreqs.

Mit Biegen und Brechen, ein paar Klimmzügen und Handständen habe ich openSUSE 11.0 sogar mal mit 64 MB RAM betrieben. Mit noch etwas mehr Mühe ginge sicher noch weniger... :D

[marce]

Blinkende LEDs an der Tastatur sind normalerweise ein Zeichen für einen Kernel-Panik.

[Aqualung]

Blinkende LEDs an der Tastatur sind normalerweise ein Zeichen für einen Kernel-Panik.

Full ACK. Und spricht öfters für ACPI Probleme bzw. sonstige Chipsatz-Unverträglichkeiten. Kannst Du mal ein


sudo /sbin/lspci

posten?

[Simpel]

Kannst Du mal ein - sudo /sbin/lspci - posten?

Der PC steht nicht bei mir, zudem war ich ja noch bei der Installation... Komm ich auch anders an die gewünschten Infos?

[pferdefreund]

Auch während der Installation kann man bei SUSE per Alt+f2, f3... auf
eine andere Konsole wechseln und einen lspci usw absetzen.

Ich bin Weidechef - ich darf das

[Simpel]

Hallo,

hier die Ausgabe von /sbin/lspci:

00:00.0 RAM memory: nVidia Corporation C51 Host Bridge (rev a2)
00:00.1 RAM memory: nVidia Corporation C51 Memory Controller 0 (rev a2)
00:00.2 RAM memory: nVidia Corporation C51 Memory Controller 1 (rev a2)
00:00.3 RAM memory: nVidia Corporation C51 Memory Controller 5 (rev a2)
00:00.4 RAM memory: nVidia Corporation C51 Memory Controller 4 (rev a2)
00:00.5 RAM memory: nVidia Corporation C51 Host Bridge (rev a2)
00:00.6 RAM memory: nVidia Corporation C51 Memory Controller 3 (rev a2)
00:00.7 RAM memory: nVidia Corporation C51 Memory Controller 2 (rev a2)
00:02.0 PCI bridge: nVidia Corporation C51 PCI Express Bridge (rev a1)
00:03.0 PCI bridge: nVidia Corporation C51 PCI Express Bridge (rev a1)
00:04.0 PCI bridge: nVidia Corporation C51 PCI Express Bridge (rev a1)
00:05.0 VGA compatible controller: nVidia Corporation C51G [GeForce 6100] (rev a2)
00:09.0 RAM memory: nVidia Corporation MCP51 Host Bridge (rev a2)
00:0a.0 ISA bridge: nVidia Corporation MCP51 LPC Bridge (rev a2)
00:0a.1 SMBus: nVidia Corporation MCP51 SMBus (rev a2)
00:0a.2 RAM memory: nVidia Corporation MCP51 Memory Controller 0 (rev a2)
00:0b.0 USB Controller: nVidia Corporation MCP51 USB Controller (rev a2)
00:0b.1 USB Controller: nVidia Corporation MCP51 USB Controller (rev a2)
00:0d.0 IDE interface: nVidia Corporation MCP51 IDE (rev a1)
00:0e.0 IDE interface: nVidia Corporation MCP51 Serial ATA Controller (rev a1)
00:10.0 PCI bridge: nVidia Corporation MCP51 PCI Bridge (rev a2)
00:10.2 Multimedia audio controller: nVidia Corporation MCP51 AC97 Audio Controller (rev a2)
00:14.0 Bridge: nVidia Corporation MCP51 Ethernet Controller (rev a1)
00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control

Mit den Parameter noacpi und acpi=off hab ich auch versucht zu starten, trotzdem hat sich das System nach ein paar Minuten wieder aufgehängt.

[Aqualung]

Leider kann ich aus Deinem lspci keinen "Verdächtigen" erkennen.
Hast Du irgendwelche USB/Firewire-Geräte an dem Rechner?

Poste bitte noch


sudo cat /var/log/boot.omsg

[Simpel]

Ja, 2 USB Geräte sind angeschlossen. Einmal ein Epson Stylus DX 5000 und eine Dockingstation für ein Pocket-PC glaub ich.
Bin gerade von meinen Einsatz beim Nachbarn zurück. Den Arbeitsspeicher und die Festplatte kann ich jetzt wohl ausschließen als Fehlerquelle.
Ich habe eine 2. Platte eingebaut und die andere abgetrennt, Opensuse installiert und es lief schon eine Weile und ich dachte alles ist gut da hing sich das System wieder auf mit blinkenden LEDs.

[Vitalienbruder]

... Läuft die 11.1 auch mit 500 Mb?
SuSE 10.0 konnte ich damals auf meinem älteren Zweitrechner, ein F&S 1,4GHz mit 128 MB-RAM nur über den Kommandozeilen-Yast installieren. Bei der normalen grafischen Installation gab es einfach einen Blackout, ohne jede Meldung.

Im Betrieb war das Linux-System letztlich instabil. Solange wie man nur einen Browser aufhatte etc. ging es halbwegs, aber wehe man machte auch noch OpenOffice auf. Ich kopiere z. B. mache Zeitungsartikel und füge sie in die jeweilige Textverarbeitung ein, unter Linux eben OO. Das war hier einfach tödlich! Zwei Versuche, zwei totale Aufhänger! Es half wirklich nur noch den Stecker ziehen.
Auf der ersten HD war da Win xp home drauf, und das lief auch nicht besonders toll, aber immer noch besser. Hatte man aber zu viel auf gab es auch Aufhänger, aber unter Win kann man die über den Taskmanager abschießen, bei Linux reagierte keine Taste mehr.

Kurze Rede langer Sinn, oder umgekehrt, 500MB-RAM für SuSE 11.1 könnten eventuell die gleichen Reaktionen hervorrufen wie oben geschildert. - Meiner Ansicht nach ist das eindeutig zu wenig.

[Simpel]

Hallo,

hier die Ausgabe von cat /var/log/boot.omsg



Inspecting /boot/System.map-2.6.27.21-0.1-pae
Cannot find map file.
No module symbols loaded - kernel modules not enabled.

Cannot build symbol table - disabling symbol lookups
klogd 1.4.1, log source = ksyslog started.
<6>Initializing cgroup subsys cpuset
<6>Initializing cgroup subsys cpu
<5>Linux version 2.6.27.21-0.1-pae (geeko@buildhost) (gcc version 4.3.2 [gcc-4_3-branch revision 141291] (SUSE Linux) ) #1 SMP 2009-03-31 14:50:44 +0200
<6>BIOS-provided physical RAM map:
<6> BIOS-e820: 0000000000000000 - 000000000009c000 (usable)
<6> BIOS-e820: 000000000009c000 - 00000000000a0000 (reserved)
<6> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
<6> BIOS-e820: 0000000000100000 - 000000003bef0000 (usable)
<6> BIOS-e820: 000000003bef0000 - 000000003bef3000 (ACPI NVS)
<6> BIOS-e820: 000000003bef3000 - 000000003bf00000 (ACPI data)
<6> BIOS-e820: 000000003c000000 - 0000000040000000 (reserved)
<6> BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
<6> BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
<6>DMI 2.2 present.
<5>Phoenix BIOS detected: BIOS may corrupt low RAM, working it around.
<6>last_pfn = 0x3bef0 max_arch_pfn = 0x1000000
<6>x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
<7>kernel direct mapping tables up to 38000000 @ 10000-18000
<6>NX (Execute Disable) protection: active
<6>RAMDISK: 37a72000 - 37fefd86
<4>ACPI: RSDP 000F7C00, 0014 (r0 Nvidia)
<4>ACPI: RSDT 3BEF3040, 0034 (r1 Nvidia AWRDACPI 42302E31 AWRD 0)
<4>ACPI: FACP 3BEF30C0, 0074 (r1 Nvidia AWRDACPI 42302E31 AWRD 0)
<4>ACPI: DSDT 3BEF3180, 4C1F (r1 NVIDIA AWRDACPI 1000 MSFT 100000E)
<4>ACPI: FACS 3BEF0000, 0040
<4>ACPI: SSDT 3BEF7EC0, 00B5 (r1 PTLTD POWERNOW 1 LTP 1)
<4>ACPI: MCFG 3BEF7FC0, 003C (r1 Nvidia AWRDACPI 42302E31 AWRD 0)
<4>ACPI: APIC 3BEF7E00, 0072 (r1 Nvidia AWRDACPI 42302E31 AWRD 0)
<7>ACPI: Local APIC address 0xfee00000
<7>NUMA - single node, flat memory mode
<6>Node: 0, start_pfn: 0, end_pfn: 3bef0
<7> Setting physnode_map array to node 0 for pfns:
<7> 0 4000 8000 c000 10000 14000 18000 1c000 20000 24000 28000 2c000 30000 34000 38000
<7>node 0 pfn: [0 - 3bef0]
<7>Reserving 2560 pages of KVA for lmem_map of node 0 at 3b400
<7>remove_active_range (0, 242688, 245248)
<6>Reserving total of a00 pages for numa KVA remap
<6>kva_start_pfn ~ 37000 max_low_pfn ~ 38000
<6>max_pfn = 3bef0
<5>62MB HIGHMEM available.
<5>896MB LOWMEM available.
<7>max_low_pfn = 38000, highstart_pfn = 38000
<7>Low memory ends at vaddr f8000000
<7>node 0 will remap to vaddr f7000000 - f7a00000
<7>allocate_pgdat: node 0 NODE_DATA f7000000
<7>remap_numa_kva: node 0
<7>remap_numa_kva: f7000000 to pfn 0003b400
<7>remap_numa_kva: f7200000 to pfn 0003b600
<7>remap_numa_kva: f7400000 to pfn 0003b800
<7>remap_numa_kva: f7600000 to pfn 0003ba00
<7>remap_numa_kva: f7800000 to pfn 0003bc00
<7>High memory starts at vaddr f8000000
<6> mapped low ram: 0 - 38000000
<6> low ram: 00000000 - 38000000
<6> bootmap 00014000 - 0001b000
<6>(11 early reservations) ==> bootmem [0000000000 - 0038000000]
<6> #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
<6> #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
<6> #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
<6> #3 [0000100000 - 000065445c] TEXT DATA BSS ==> [0000100000 - 000065445c]
<6> #4 [0037a72000 - 0037fefd86] RAMDISK ==> [0037a72000 - 0037fefd86]
<6> #5 [0000655000 - 000065d000] INIT_PG_TABLE ==> [0000655000 - 000065d000]
<6> #6 [000009c000 - 0000100000] BIOS reserved ==> [000009c000 - 0000100000]
<6> #7 [0000010000 - 0000014000] PGTABLE ==> [0000010000 - 0000014000]
<6> #8 [003b400000 - 003be00000] KVA RAM
<6> #9 [0037000000 - 0037a00000] KVA PG ==> [0037000000 - 0037a00000]
<6> #10 [0000014000 - 000001b000] BOOTMAP ==> [0000014000 - 000001b000]
<6>found SMP MP-table at [c00f3a80] 000f3a80
<4>Zone PFN ranges:
<4> DMA 0x00000010 -> 0x00001000
<4> Normal 0x00001000 -> 0x00038000
<4> HighMem 0x00038000 -> 0x0003bef0
<4>Movable zone start PFN for each node
<4>early_node_map[3] active PFN ranges
<4> 0: 0x00000010 -> 0x0000009c
<4> 0: 0x00000100 -> 0x0003b400
<4> 0: 0x0003be00 -> 0x0003bef0
<7>On node 0 totalpages: 242812
<7>free_area_init_node: node 0, pgdat f7000000, node_mem_map f7002240
<7> DMA zone: 3944 pages, LIFO batch:0
<7> Normal zone: 223300 pages, LIFO batch:31
<7> HighMem zone: 13410 pages, LIFO batch:3
<6>Using APIC driver default
<6>Nvidia board detected. Ignoring ACPI timer override.
<6>If you got timer trouble try acpi_use_timer_override
<6>ACPI: PM-Timer IO Port: 0x1008
<7>ACPI: Local APIC address 0xfee00000
<6>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
<6>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
<6>ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
<6>ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
<6>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
<6>IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
<6>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
<6>ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
<6>ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
<7>ACPI: IRQ9 used by override.
<7>ACPI: IRQ14 used by override.
<7>ACPI: IRQ15 used by override.
<4>Enabling APIC mode: Flat. Using 1 I/O APICs
<6>Using ACPI (MADT) for SMP configuration information
<6>SMP: Allowing 2 CPUs, 1 hotplug CPUs
<7>mapped APIC to ffffb000 (fee00000)
<7>mapped IOAPIC to ffffa000 (fec00000)
<6>PM: Registered nosave memory: 000000000009c000 - 00000000000a0000
<6>PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
<6>PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
<6>Allocating PCI resources starting at 50000000 (gap: 40000000:a0000000)
<6>PERCPU: Allocating 38556 bytes of per cpu data
<7>NR_CPUS: 128, nr_cpu_ids: 2, nr_node_ids 8
<4>Built 1 zonelists in Zone order, mobility grouping on. Total pages: 240654
<4>Policy zone: HighMem
<5>Kernel command line: root=/dev/disk/by-id/ata-SAMSUNG_HD080HJP_S0DEJ10Y942996-part6 resume=/dev/disk/by-id/ata-SAMSUNG_HD080HJP_S0DEJ10Y942996-part8 splash=silent vga=0x31a
<6>bootsplash: silent mode.
<6>Enabling fast FPU save and restore... done.
<6>Enabling unmasked SIMD FPU exception support... done.
<6>Initializing CPU#0
<4>PID hash table entries: 4096 (order: 12, 16384 bytes)
<6>TSC: PIT calibration confirmed by PMTIMER.
<6>TSC: using PIT calibration value
<4>Detected 1799.954 MHz processor.
<7>spurious 8259A interrupt: IRQ7.
<4>Console: colour dummy device 80x25
<6>console [tty0] enabled
<6>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
<6>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
<6>Initializing HighMem for node 0 (00038000:0003bef0)
<6>Memory: 948972k/981952k available (2357k kernel code, 22276k reserved, 1930k data, 292k init, 54208k highmem)
<6>virtual kernel memory layout:
<6> fixmap : 0xff8b7000 - 0xfffff000 (7456 kB)
<6> pkmap : 0xff400000 - 0xff600000 (2048 kB)
<6> vmalloc : 0xf8800000 - 0xff3fe000 ( 107 MB)
<6> lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
<6> .init : 0xc0539000 - 0xc0582000 ( 292 kB)
<6> .data : 0xc034d5f5 - 0xc05301d0 (1930 kB)
<6> .text : 0xc0100000 - 0xc034d5f5 (2357 kB)
<6>Checking if this processor honours the WP bit even in supervisor mode...Ok.
<7>CPA: page pool initialized 1 of 1 pages preallocated
<6>Calibrating delay loop (skipped), value calculated using timer frequency.. 3599.90 BogoMIPS (lpj=7199816)
<4>kdb version 4.4 by Keith Owens, Scott Lurndal. Copyright SGI, All Rights Reserved
<6>Security Framework initialized
<6>AppArmor: AppArmor initialized
<4>Mount-cache hash table entries: 512
<6>Initializing cgroup subsys ns
<6>Initializing cgroup subsys cpuacct
<6>Initializing cgroup subsys memory
<6>Initializing cgroup subsys devices
<6>Initializing cgroup subsys freezer
<6>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
<6>CPU: L2 Cache: 512K (64 bytes/line)
<6>Intel machine check architecture supported.
<6>Intel machine check reporting enabled on CPU#0.
<6>Checking 'hlt' instruction... OK.
<6>SMP alternatives: switching to UP code
<6>ACPI: Core revision 20080609
<6>ACPI: Checking initramfs for custom DSDT
<4>Parsing all Control Methods:
<4>Table [DSDT](id 0001) - 869 Objects with 88 Devices 313 Methods 36 Regions
<4>Parsing all Control Methods:
<4>Table [SSDT](id 0002) - 3 Objects with 0 Devices 0 Methods 0 Regions
<4> tbxface-0596 [00] tb_load_namespace : ACPI Tables successfully acquired
<4>evxfevnt-0091 [00] enable : Transition to ACPI mode successful
<6>Mapping cpu 0 to node 0
<4>ENABLING IO-APIC IRQs
<6>..TIMER: vector=0x31 apic1=0 pin1=0 apic2=-1 pin2=-1
<6>CPU0: AMD Athlon(tm) 64 Processor 3000+ stepping 02
<6>Brought up 1 CPUs
<6>Total of 1 processors activated (3599.90 BogoMIPS).
<7>CPU0 attaching NULL sched-domain.
<6>net_namespace: 1044 bytes
<6>NET: Registered protocol family 16
<6>ACPI: bus type pci registered
<5>PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
<5>PCI: MCFG area at e0000000 reserved in E820
<6>PCI: Using MMCONFIG for extended config space
<6>PCI: Using configuration type 1 for base access
<5>perfmon: version 2.82
<5>perfmon: CPU hotplug support enabled
<4>evgpeblk-0957 [00] ev_create_gpe_block : GPE 00 to 1F [_GPE] 4 regs on int 0x9
<4>evgpeblk-0957 [00] ev_create_gpe_block : GPE 20 to 5F [_GPE] 8 regs on int 0x9
<7>ACPI: EC: Look up EC in DSDT
<4>Completing Region/Field/Buffer/Package initialization:................................... .................................................. ............
<4>Initialized 32/36 Regions 9/9 Fields 32/32 Buffers 24/24 Packages (881 nodes)
<4>Initializing Device/Processor/Thermal objects by executing _INI methods:..
<4>Executed 2 _INI methods requiring 1 _STA executions (examined 93 objects)
<4>evgpeblk-1054 [00] ev_initialize_gpe_bloc: Found 9 Wake, Enabled 1 Runtime GPEs in this block
<4>evgpeblk-1054 [00] ev_initialize_gpe_bloc: Found 0 Wake, Enabled 0 Runtime GPEs in this block
<6>ACPI: Interpreter enabled
<6>ACPI: (supports S0 S1 S3 S4 S5)
<6>ACPI: Using IOAPIC for interrupt routing
<6>ACPI: PCI Root Bridge [PCI0] (0000:00)
<6>pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
<6>pci 0000:00:02.0: PME# disabled
<6>pci 0000:00:03.0: PME# supported from D0 D1 D2 D3hot D3cold
<6>pci 0000:00:03.0: PME# disabled
<6>pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold
<6>pci 0000:00:04.0: PME# disabled
<7>PCI: 0000:00:05.0 reg 10 32bit mmio: [fb000000, fbffffff]
<7>PCI: 0000:00:05.0 reg 14 64bit mmio: [d0000000, dfffffff]
<7>PCI: 0000:00:05.0 reg 1c 64bit mmio: [fc000000, fcffffff]
<7>PCI: 0000:00:05.0 reg 30 32bit mmio: [0, 1ffff]
<7>PCI: 0000:00:0a.1 reg 20 io port: [1c00, 1c3f]
<7>PCI: 0000:00:0a.1 reg 24 io port: [1c40, 1c7f]
<6>pci 0000:00:0a.1: PME# supported from D3hot D3cold
<6>pci 0000:00:0a.1: PME# disabled
<7>PCI: 0000:00:0b.0 reg 10 32bit mmio: [fe02f000, fe02ffff]
<7>pci 0000:00:0b.0: supports D1
<7>pci 0000:00:0b.0: supports D2
<6>pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
<6>pci 0000:00:0b.0: PME# disabled
<7>PCI: 0000:00:0b.1 reg 10 32bit mmio: [fe02e000, fe02e0ff]
<7>pci 0000:00:0b.1: supports D1
<7>pci 0000:00:0b.1: supports D2
<6>pci 0000:00:0b.1: PME# supported from D0 D1 D2 D3hot D3cold
<6>pci 0000:00:0b.1: PME# disabled
<7>PCI: 0000:00:0d.0 reg 20 io port: [f400, f40f]
<7>PCI: 0000:00:0e.0 reg 10 io port: [9f0, 9f7]
<7>PCI: 0000:00:0e.0 reg 14 io port: [bf0, bf3]
<7>PCI: 0000:00:0e.0 reg 18 io port: [970, 977]
<7>PCI: 0000:00:0e.0 reg 1c io port: [b70, b73]
<7>PCI: 0000:00:0e.0 reg 20 io port: [e000, e00f]
<7>PCI: 0000:00:0e.0 reg 24 32bit mmio: [fe02d000, fe02dfff]
<7>PCI: 0000:00:10.2 reg 10 io port: [dc00, dcff]
<7>PCI: 0000:00:10.2 reg 14 io port: [d800, d8ff]
<7>PCI: 0000:00:10.2 reg 18 32bit mmio: [fe02c000, fe02cfff]
<7>pci 0000:00:10.2: supports D1
<7>pci 0000:00:10.2: supports D2
<7>PCI: 0000:00:14.0 reg 10 32bit mmio: [fe02b000, fe02bfff]
<7>PCI: 0000:00:14.0 reg 14 io port: [d400, d407]
<7>pci 0000:00:14.0: supports D1
<7>pci 0000:00:14.0: supports D2
<6>pci 0000:00:14.0: PME# supported from D0 D1 D2 D3hot D3cold
<6>pci 0000:00:14.0: PME# disabled
<7>PCI: bridge 0000:00:02.0 io port: [a000, afff]
<7>PCI: bridge 0000:00:02.0 32bit mmio: [fd700000, fd7fffff]
<7>PCI: bridge 0000:00:02.0 64bit mmio pref: [fde00000, fdefffff]
<7>PCI: bridge 0000:00:03.0 io port: [9000, 9fff]
<7>PCI: bridge 0000:00:03.0 32bit mmio: [fdd00000, fddfffff]
<7>PCI: bridge 0000:00:03.0 64bit mmio pref: [fdc00000, fdcfffff]
<7>PCI: bridge 0000:00:04.0 io port: [b000, bfff]
<7>PCI: bridge 0000:00:04.0 32bit mmio: [fd900000, fd9fffff]
<7>PCI: bridge 0000:00:04.0 64bit mmio pref: [fd800000, fd8fffff]
<6>pci 0000:00:10.0: transparent bridge
<7>PCI: bridge 0000:00:10.0 io port: [c000, cfff]
<7>PCI: bridge 0000:00:10.0 32bit mmio: [fdb00000, fdbfffff]
<7>PCI: bridge 0000:00:10.0 32bit mmio pref: [fda00000, fdafffff]
<7>bus 00 -> node 0
<7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
<7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
<6>ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 9 10 11 14 15) *0, disabled.
<6>ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 9 10 11 14 15) *0, disabled.
<6>ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 9 10 11 14 15) *0, disabled.
<6>ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 9 10 11 14 15) *0, disabled.
<6>ACPI: PCI Interrupt Link [LNK5] (IRQs 5 7 9 10 11 14 15) *0, disabled.
<6>ACPI: PCI Interrupt Link [LNK6] (IRQs 5 7 9 10 11 14 15) *0, disabled.
<6>ACPI: PCI Interrupt Link [LNK7] (IRQs 5 7 9 *10 11 14 15)
<6>ACPI: PCI Interrupt Link [LNK8] (IRQs 5 7 9 10 11 14 15) *0, disabled.
<6>ACPI: PCI Interrupt Link [LUBA] (IRQs 5 7 9 10 *11 14 15)
<6>ACPI: PCI Interrupt Link [LUBB] (IRQs 5 7 9 10 11 14 15) *0, disabled.
<6>ACPI: PCI Interrupt Link [LMAC] (IRQs 5 7 9 10 *11 14 15)
<6>ACPI: PCI Interrupt Link [LACI] (IRQs *5 7 9 10 11 14 15)
<6>ACPI: PCI Interrupt Link [LAZA] (IRQs 5 7 9 10 11 14 15) *0, disabled.
<6>ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 *10 11 14 15)
<6>ACPI: PCI Interrupt Link [LMCI] (IRQs 5 7 9 10 11 14 15) *0, disabled.
<6>ACPI: PCI Interrupt Link [LSMB] (IRQs 5 7 9 *10 11 14 15)
<6>ACPI: PCI Interrupt Link [LUB2] (IRQs *5 7 9 10 11 14 15)
<6>ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled.
<6>ACPI: PCI Interrupt Link [LSID] (IRQs 5 7 9 10 *11 14 15)
<6>ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled.
<6>ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled.
<6>ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled.
<6>ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled.
<6>ACPI: PCI Interrupt Link [APC5] (IRQs 16) *0, disabled.
<6>ACPI: PCI Interrupt Link [APC6] (IRQs 16) *0, disabled.
<6>ACPI: PCI Interrupt Link [APC7] (IRQs 16) *0
<6>ACPI: PCI Interrupt Link [APC8] (IRQs 16) *0, disabled.
<6>ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0
<6>ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22 23) *0, disabled.
<6>ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0
<6>ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22 23) *0
<6>ACPI: PCI Interrupt Link [APMU] (IRQs 20 21 22 23) *0
<6>ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22 23) *0, disabled.
<6>ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22 23) *0, disabled.
<6>ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0
<6>ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0
<6>ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0, disabled.
<6>ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.
<6>ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0



Zwischendurch habe ich auch mal die Live- CD probiert, damit kam es zum gleichen Absturz.
Vielleicht habt Ihr ja noch eine Idee woran es liegen könnte.
Gruß
Torsten

[Simpel]

weiter gehts...



<6>Linux Plug and Play Support v0.97 (c) Adam Belay
<6>pnp: PnP ACPI init
<6>ACPI: bus type pnp registered
<6>pnp: PnP ACPI: found 14 devices
<6>ACPI: ACPI bus type pnp unregistered
<6>PnPBIOS: Disabled by ACPI PNP
<6>PCI: Using ACPI for IRQ routing
<6>AppArmor: AppArmor Filesystem Enabled
<4>ACPI: RTC can wake from S4
<6>system 00:01: ioport range 0x1000-0x107f has been reserved
<6>system 00:01: ioport range 0x1080-0x10ff has been reserved
<6>system 00:01: ioport range 0x1400-0x147f has been reserved
<6>system 00:01: ioport range 0x1480-0x14ff has been reserved
<6>system 00:01: ioport range 0x1800-0x187f has been reserved
<6>system 00:01: ioport range 0x1880-0x18ff has been reserved
<6>system 00:01: ioport range 0x2000-0x207f has been reserved
<6>system 00:01: ioport range 0x2080-0x20ff has been reserved
<6>system 00:01: iomem range 0xfefe0000-0xfefe01ff could not be reserved
<6>system 00:01: iomem range 0x3c000000-0x3fffffff could not be reserved
<6>system 00:02: ioport range 0x4d0-0x4d1 has been reserved
<6>system 00:02: ioport range 0x800-0x87f has been reserved
<6>system 00:02: ioport range 0x290-0x29f has been reserved
<6>system 00:02: ioport range 0x290-0x297 has been reserved
<6>system 00:0c: iomem range 0xe0000000-0xefffffff could not be reserved
<6>system 00:0d: iomem range 0xcde00-0xcffff has been reserved
<6>system 00:0d: iomem range 0xf0000-0xf7fff could not be reserved
<6>system 00:0d: iomem range 0xf8000-0xfbfff could not be reserved
<6>system 00:0d: iomem range 0xfc000-0xfffff could not be reserved
<6>system 00:0d: iomem range 0x3bef0000-0x3befffff could not be reserved
<6>system 00:0d: iomem range 0xffff0000-0xffffffff could not be reserved
<6>system 00:0d: iomem range 0x0-0x9ffff could not be reserved
<6>system 00:0d: iomem range 0x100000-0x3beeffff could not be reserved
<6>system 00:0d: iomem range 0x3bf00000-0x3fefffff could not be reserved
<6>system 00:0d: iomem range 0xfec00000-0xfec00fff could not be reserved
<6>system 00:0d: iomem range 0xfee00000-0xfeefffff could not be reserved
<6>system 00:0d: iomem range 0xfefff000-0xfeffffff could not be reserved
<6>system 00:0d: iomem range 0xfff80000-0xfff80fff could not be reserved
<6>system 00:0d: iomem range 0xfff90000-0xfffbffff could not be reserved
<6>system 00:0d: iomem range 0xfffed000-0xfffeffff could not be reserved
<6>pci 0000:00:02.0: PCI bridge, secondary bus 0000:01
<6>pci 0000:00:02.0: IO window: 0xa000-0xafff
<6>pci 0000:00:02.0: MEM window: 0xfd700000-0xfd7fffff
<6>pci 0000:00:02.0: PREFETCH window: 0x000000fde00000-0x000000fdefffff
<6>pci 0000:00:03.0: PCI bridge, secondary bus 0000:02
<6>pci 0000:00:03.0: IO window: 0x9000-0x9fff
<6>pci 0000:00:03.0: MEM window: 0xfdd00000-0xfddfffff
<6>pci 0000:00:03.0: PREFETCH window: 0x000000fdc00000-0x000000fdcfffff
<6>pci 0000:00:04.0: PCI bridge, secondary bus 0000:03
<6>pci 0000:00:04.0: IO window: 0xb000-0xbfff
<6>pci 0000:00:04.0: MEM window: 0xfd900000-0xfd9fffff
<6>pci 0000:00:04.0: PREFETCH window: 0x000000fd800000-0x000000fd8fffff
<6>pci 0000:00:10.0: PCI bridge, secondary bus 0000:04
<6>pci 0000:00:10.0: IO window: 0xc000-0xcfff
<6>pci 0000:00:10.0: MEM window: 0xfdb00000-0xfdbfffff
<6>pci 0000:00:10.0: PREFETCH window: 0x000000fda00000-0x000000fdafffff
<7>pci 0000:00:02.0: setting latency timer to 64
<7>pci 0000:00:03.0: setting latency timer to 64
<7>pci 0000:00:04.0: setting latency timer to 64
<7>pci 0000:00:10.0: setting latency timer to 64
<6>bus: 00 index 0 io port: [0, ffff]
<6>bus: 00 index 1 mmio: [0, ffffffffffffffff]
<6>bus: 01 index 0 io port: [a000, afff]
<6>bus: 01 index 1 mmio: [fd700000, fd7fffff]
<6>bus: 01 index 2 mmio: [fde00000, fdefffff]
<6>bus: 01 index 3 mmio: [0, 0]
<6>bus: 02 index 0 io port: [9000, 9fff]
<6>bus: 02 index 1 mmio: [fdd00000, fddfffff]
<6>bus: 02 index 2 mmio: [fdc00000, fdcfffff]
<6>bus: 02 index 3 mmio: [0, 0]
<6>bus: 03 index 0 io port: [b000, bfff]
<6>bus: 03 index 1 mmio: [fd900000, fd9fffff]
<6>bus: 03 index 2 mmio: [fd800000, fd8fffff]
<6>bus: 03 index 3 mmio: [0, 0]
<6>bus: 04 index 0 io port: [c000, cfff]
<6>bus: 04 index 1 mmio: [fdb00000, fdbfffff]
<6>bus: 04 index 2 mmio: [fda00000, fdafffff]
<6>bus: 04 index 3 io port: [0, ffff]
<6>bus: 04 index 4 mmio: [0, ffffffffffffffff]
<6>NET: Registered protocol family 2
<6>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
<6>TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
<6>TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
<6>TCP: Hash tables configured (established 131072 bind 65536)
<6>TCP reno registered
<6>NET: Registered protocol family 1
<7>Switched to high resolution mode on CPU 0
<6>Unpacking initramfs... done
<6>Freeing initrd memory: 5623k freed
<6>Machine check exception polling timer started.
<6>audit: initializing netlink socket (disabled)
<5>type=2000 audit(1241719323.688:1): initialized
<4>highmem bounce pool size: 64 pages
<6>HugeTLB registered 2 MB page size, pre-allocated 0 pages
<5>VFS: Disk quotas dquot_6.5.1
<4>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
<6>msgmni has been set to 439
<6>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
<6>io scheduler noop registered
<6>io scheduler anticipatory registered
<6>io scheduler deadline registered
<6>io scheduler cfq registered (default)
<6>perfmon: added sampling format default
<6>pci 0000:00:00.0: Enabling HT MSI Mapping
<6>pci 0000:00:02.0: Enabling HT MSI Mapping
<6>pci 0000:00:03.0: Enabling HT MSI Mapping
<6>pci 0000:00:04.0: Enabling HT MSI Mapping
<7>pci 0000:00:05.0: Boot video device
<6>pci 0000:00:09.0: Enabling HT MSI Mapping
<4>pci 0000:00:0b.1: EHCI: BIOS handoff failed (BIOS bug?) 01010001
<6>pci 0000:00:0e.0: Enabling HT MSI Mapping
<6>PCI: MCP51 PCI bridge detected. Disabling DAC.
<6>pci 0000:00:10.0: Enabling HT MSI Mapping
<7>pcieport-driver 0000:00:02.0: setting latency timer to 64
<6>pcieport-driver 0000:00:02.0: found MSI capability
<7>pci_express 0000:00:02.0:pcie00: allocate port service
<7>pci_express 0000:00:02.0:pcie03: allocate port service
<7>pcieport-driver 0000:00:03.0: setting latency timer to 64
<6>pcieport-driver 0000:00:03.0: found MSI capability
<7>pci_express 0000:00:03.0:pcie00: allocate port service
<7>pci_express 0000:00:03.0:pcie03: allocate port service
<7>pcieport-driver 0000:00:04.0: setting latency timer to 64
<6>pcieport-driver 0000:00:04.0: found MSI capability
<7>pci_express 0000:00:04.0:pcie00: allocate port service
<7>pci_express 0000:00:04.0:pcie03: allocate port service
<6>vesafb: framebuffer at 0xd0000000, mapped to 0xf8880000, using 10240k, total 65536k
<6>vesafb: mode is 1280x1024x16, linelength=2560, pages=1
<6>vesafb: protected mode interface info at c000:c2e0
<6>vesafb: pmi: set display start = c00cc316, set palette = c00cc380
<6>vesafb: pmi: ports = 3b4 3b5 3ba 3c0 3c1 3c4 3c5 3c6 3c7 3c8 3c9 3cc 3ce 3cf 3d0 3d1 3d2 3d3 3d4 3d5 3da
<6>vesafb: scrolling: redraw
<6>vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
<6>bootsplash 3.1.6-2004/03/31: looking for picture...
<6>bootsplash: silentjpeg size 113709 bytes
<6>bootsplash: ...found (1280x1024, 43709 bytes, v3).
<4>Console: switching to colour frame buffer device 156x60
<6>fb0: VESA VGA frame buffer device
<6>isapnp: Scanning for PnP cards...
<6>isapnp: No Plug & Play device found
<6>Serial: 8250/16550 driver8 ports, IRQ sharing enabled
<6>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
<6>00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
<6>PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
<6>serio: i8042 KBD port at 0x60,0x64 irq 1
<6>serio: i8042 AUX port at 0x60,0x64 irq 12
<6>mice: PS/2 mouse device common for all mice
<6>cpuidle: using governor ladder
<6>cpuidle: using governor menu
<6>TCP cubic registered
<4>Using IPI No-Shortcut mode
<4>registered taskstats version 1
<6>Freeing unused kernel memory: 292k freed
<6>Write protecting the kernel text: 2360k
<6>Write protecting the kernel read-only data: 1748k
<6>input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
<6>processor ACPI_CPU:00: registered as cooling_device0
<6>thermal LNXTHERM:01: registered as thermal_zone0
<6>ACPI: Thermal Zone [THRM] (40 C)
<6>ACPI: No dock devices found.
<5>SCSI subsystem initialized
<7>libata version 3.00 loaded.
<7>sata_nv 0000:00:0e.0: version 3.5
<4>ACPI: PCI Interrupt Link [APSI] enabled at IRQ 23
<6>sata_nv 0000:00:0e.0: PCI INT A -> Link[APSI] -> GSI 23 (level, low) -> IRQ 23
<5>sata_nv 0000:00:0e.0: Using SWNCQ mode
<7>sata_nv 0000:00:0e.0: setting latency timer to 64
<6>scsi0 : sata_nv
<6>scsi1 : sata_nv
<6>ata1: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xe000 irq 23
<6>ata2: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xe008 irq 23
<6>input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input1
<6>ata1: SATA link down (SStatus 0 SControl 300)
<6>ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
<6>ata2.00: ATA-7: SAMSUNG HD080HJ/P, ZH100-34, max UDMA7
<6>ata2.00: 156250000 sectors, multi 16: LBA48 NCQ (depth 31/32)
<6>ata2.00: configured for UDMA/133
<5>scsi 1:0:0:0: Direct-Access ATA SAMSUNG HD080HJ/ ZH10 PQ: 0 ANSI: 5
<7>pata_amd 0000:00:0d.0: version 0.3.10
<7>pata_amd 0000:00:0d.0: setting latency timer to 64
<6>scsi2 : pata_amd
<6>scsi3 : pata_amd
<6>ata3: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf400 irq 14
<6>ata4: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf408 irq 15
<6>ata4.00: ATAPI: HL-DT-ST DVDRAM GSA-4167B, DL11, max UDMA/33
<6>ata4.01: ATAPI: TSSTcorpDVD-ROM SH-D162C, TS02, max UDMA/33
<7>ata4: nv_mode_filter: 0x739f&0x701f->0x701f, BIOS=0x7000 (0xc0c0) ACPI=0x701f (60:60:0x1f)
<7>ata4: nv_mode_filter: 0x739f&0x701f->0x701f, BIOS=0x7000 (0xc0c0) ACPI=0x701f (60:60:0x1f)
<6>ata4.00: configured for UDMA/33
<6>ata4.01: configured for UDMA/33
<5>scsi 3:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-4167B DL11 PQ: 0 ANSI: 5
<5>scsi 3:0:1:0: CD-ROM TSSTcorp DVD-ROM SH-D162C TS02 PQ: 0 ANSI: 5
<6>Uniform Multi-Platform E-IDE driver
<6>fan PNP0C0B:00: registered as cooling_device1
<6>ACPI: Fan [FAN] (on)
<6>BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
<6>udevd version 128 started
<6>usbcore: registered new interface driver usbfs
<6>usbcore: registered new interface driver hub
<6>usbcore: registered new device driver usb
<4>ACPI: PCI Interrupt Link [APCL] enabled at IRQ 22
<6>ehci_hcd 0000:00:0b.1: PCI INT B -> Link[APCL] -> GSI 22 (level, low) -> IRQ 22
<7>ehci_hcd 0000:00:0b.1: setting latency timer to 64
<6>ehci_hcd 0000:00:0b.1: EHCI Host Controller
<6>ehci_hcd 0000:00:0b.1: new USB bus registered, assigned bus number 1
<6>ehci_hcd 0000:00:0b.1: debug port 1
<7>ehci_hcd 0000:00:0b.1: cache line size of 64 is not supported
<6>ehci_hcd 0000:00:0b.1: irq 22, io mem 0xfe02e000
<7>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
<6>ehci_hcd 0000:00:0b.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
<6>usb usb1: configuration #1 chosen from 1 choice
<6>hub 1-0:1.0: USB hub found
<6>hub 1-0:1.0: 8 ports detected
<5>sd 1:0:0:0: [sda] 156250000 512-byte hardware sectors: (80.0GB/74.5GiB)
<5>sd 1:0:0:0: [sda] Write Protect is off
<7>sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
<5>sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
<5>sd 1:0:0:0: [sda] 156250000 512-byte hardware sectors: (80.0GB/74.5GiB)
<5>sd 1:0:0:0: [sda] Write Protect is off
<7>sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
<5>sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
<6> sda: sda1 sda2 < sda5 sda6 sda7 sda8 >
<5>sd 1:0:0:0: [sda] Attached SCSI disk
<6>usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
<6>usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>usb usb1: Product: EHCI Host Controller
<6>usb usb1: Manufacturer: Linux 2.6.27.21-0.1-pae ehci_hcd
<6>usb usb1: SerialNumber: 0000:00:0b.1
<4>ACPI: PCI Interrupt Link [APCF] enabled at IRQ 21
<6>ohci_hcd 0000:00:0b.0: PCI INT A -> Link[APCF] -> GSI 21 (level, low) -> IRQ 21
<7>ohci_hcd 0000:00:0b.0: setting latency timer to 64
<6>ohci_hcd 0000:00:0b.0: OHCI Host Controller
<6>ohci_hcd 0000:00:0b.0: new USB bus registered, assigned bus number 2
<6>ohci_hcd 0000:00:0b.0: irq 21, io mem 0xfe02f000
<6>usb usb2: configuration #1 chosen from 1 choice
<6>hub 2-0:1.0: USB hub found
<6>hub 2-0:1.0: 8 ports detected
<6>usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
<6>usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>usb usb2: Product: OHCI Host Controller
<6>usb usb2: Manufacturer: Linux 2.6.27.21-0.1-pae ohci_hcd
<6>usb usb2: SerialNumber: 0000:00:0b.0
<6>usb 2-3: new full speed USB device using ohci_hcd and address 2
<6>usb 2-3: configuration #1 chosen from 1 choice
<6>PM: Starting manual resume from disk
<6>usb 2-3: New USB device found, idVendor=046d, idProduct=08da
<6>usb 2-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
<6>kjournald starting. Commit interval 5 seconds
<6>EXT3 FS on sda6, internal journal
<6>EXT3-fs: mounted filesystem with ordered data mode.
<6>udevd version 128 started
<6>Linux video capture interface: v2.00
<6>i2c-adapter i2c-0: nForce2 SMBus adapter at 0x1c00
<6>i2c-adapter i2c-1: nForce2 SMBus adapter at 0x1c40
<6>gspca: main v2.2.0 registered
<6>gspca: probing 046d:08da
<4>sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
<6>Uniform CD-ROM driver Revision: 3.20
<7>sr 3:0:0:0: Attached scsi CD-ROM sr0
<4>sr1: scsi3-mmc drive: 47x/47x cd/rw xa/form2 cdda tray
<7>sr 3:0:1:0: Attached scsi CD-ROM sr1
<5>sd 1:0:0:0: Attached scsi generic sg0 type 0
<5>sr 3:0:0:0: Attached scsi generic sg1 type 5
<5>sr 3:0:1:0: Attached scsi generic sg2 type 5
<6>input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
<6>ACPI: Power Button (FF) [PWRF]
<6>input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3
<6>ACPI: Power Button (CM) [PWRB]
<6>input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input4
<6>Floppy drive(s): fd0 is 1.44M
<6>IT8712 SuperIO detected.
<6>parport_pc 00:09: reported by Plug and Play ACPI
<6>parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
<6>FDC 0 is a post-1991 82077
<6>ACPI: Sleep Button (CM) [SLPB]
<6>forcedeth: Reverse Engineered nForce ethernet driver. Version 0.61.
<4>ACPI: PCI Interrupt Link [APCH] enabled at IRQ 20
<6>forcedeth 0000:00:14.0: PCI INT A -> Link[APCH] -> GSI 20 (level, low) -> IRQ 20
<7>forcedeth 0000:00:14.0: setting latency timer to 64
<6>forcedeth 0000:00:14.0: PCI: Disallowing DAC for device
<6>forcedeth 0000:00:14.0: 64-bit DMA failed, using 32-bit addressing
<6>forcedeth 0000:00:14.0: PCI: Disallowing DAC for device
<6>forcedeth 0000:00:14.0: 64-bit DMA (consistent) failed, using 32-bit ring buffers
<7>nv_probe: set workaround bit for reversed mac addr
<6>input: PC Speaker as /devices/platform/pcspkr/input/input5
<6>forcedeth 0000:00:14.0: ifname eth0, PHY OUI 0x732 @ 1, addr 00:e0:4c:dc:45:35
<6>forcedeth 0000:00:14.0: pwrctl timirq lnktim desc-v3
<4>ACPI: PCI Interrupt Link [APCJ] enabled at IRQ 23
<6>Intel ICH 0000:00:10.2: PCI INT C -> Link[APCJ] -> GSI 23 (level, low) -> IRQ 23
<7>Intel ICH 0000:00:10.2: setting latency timer to 64
<6>rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
<6>rtc0: alarms up to one year, y3k
<6>ppdev: user-space parallel port driver
<6>intel8x0_measure_ac97_clock: measured 59486 usecs
<6>intel8x0: clocking to 47066
<6>zc3xx: probe 2wr ov vga 0x0000
<6>zc3xx: probe sensor -> 11
<6>zc3xx: Find Sensor HV7131R(c)
<6>gspca: probe ok
<6>gspca: probing 046d:08da
<6>gspca: probing 046d:08da
<6>usbcore: registered new interface driver zc3xx
<6>zc3xx: registered
<6>quickcam_messenger: Logitech Quickcam Messenger USB v0.01
<6>usbcore: registered new interface driver QCM
<6>usbcore: registered new interface driver snd-usb-audio
<6>Adding 530104k swap on /dev/sda8. Priority:-1 extents:1 across:530104k
<6>device-mapper: uevent: version 1.0.3
<6>device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
<6>loop: module loaded
<6>kjournald starting. Commit interval 5 seconds
<6>EXT3 FS on sda7, internal journal
<6>EXT3-fs: mounted filesystem with ordered data mode.
<4>fuse init (API version 7.9)
Kernel logging (ksyslog) stopped.
Kernel log daemon terminating.

Boot logging started on /dev/tty1(/dev/console) at Thu May 7 18:02:17 2009

Trying manual resume from /dev/disk/by-id/ata-SAMSUNG_HD080HJP_S0DEJ10Y942996-part8
Invoking userspace resume from /dev/disk/by-id/ata-SAMSUNG_HD080HJP_S0DEJ10Y942996-part8
resume: libgcrypt version: 1.4.1
Trying manual resume from /dev/disk/by-id/ata-SAMSUNG_HD080HJP_S0DEJ10Y942996-part8
Invoking in-kernel resume from /dev/disk/by-id/ata-SAMSUNG_HD080HJP_S0DEJ10Y942996-part8
Waiting for device /dev/disk/by-id/ata-SAMSUNG_HD080HJP_S0DEJ10Y942996-part6 to appear: ok
fsck 1.41.1 (01-Sep-2008)
[/sbin/fsck.ext3 (1) -- /] fsck.ext3 -a -C0 /dev/disk/by-id/ata-SAMSUNG_HD080HJP_S0DEJ10Y942996-part6
/dev/disk/by-id/ata-SAMSUNG_HD080HJP_S0DEJ10Y942996-part6: clean, 136137/778240 files, 945499/3108569 blocks
fsck succeeded. Mounting root device read-write.
Mounting root /dev/disk/by-id/ata-SAMSUNG_HD080HJP_S0DEJ10Y942996-part6

Boot logging started on /dev/tty1(/dev/console (deleted)) at Thu May 7 20:02:20 2009

done
Starting udevd: done
Loading drivers, configuring devices: done
Loading required kernel modules
doneActivating swap-devices in /etc/fstab...
doneSetting up the hardware clockdone
Starting MD Raid unused
Activating device mapper...
done
Checking file systems...
fsck 1.41.1 (01-Sep-2008)
/dev/disk/by-id/ata-SAMSUNG_HD080HJP_S0DEJ10Y942996-part7: clean, 1515/997472 files, 113536/3988128 blocks
donedone
Mounting local file systems...
/proc on /proc type proc (rw)
sysfs on /sys type sysfs (rw)
debugfs on /sys/kernel/debug type debugfs (rw)
udev on /dev type tmpfs (rw)
devpts on /dev/pts type devpts (rw,mode=0620,gid=5)
/dev/sda7 on /home type ext3 (rw,acl,user_xattr)
doneFuse filesystem already availabledone
Mounting fuse control filesystemdone
Setting current sysctl status from /etc/sysctl.conf
net.ipv4.icmp_echo_ignore_broadcasts = 1
net.ipv4.conf.all.rp_filter = 1
fs.inotify.max_user_watches = 65536
net.ipv4.conf.default.promote_secondaries = 1
net.ipv4.conf.all.promote_secondaries = 1
done

[Simpel]

und noch weiter...



Activating remaining swap-devices in /etc/fstab...
doneCreating /var/log/boot.msg
done<notice>killproc: kill(635,29)
Enabling syn flood protectiondone
Disabling IP forwardingdone
done
Mounting securityfs on /sys/kernel/security done
Loading AppArmor profiles done
Setting up hostname 'linux-464k'done
Setting up loopback interface lo
lo IP address: 127.0.0.1/8
IP address: 127.0.0.2/8
done
System Boot Control: The system has been set up
Skipped features: boot.md boot.cycle
System Boot Control: Running /etc/init.d/boot.local
done<notice>killproc: kill(635,3)

INIT: Entering runlevel: 5



Boot logging started on /dev/tty1(/dev/console) at Thu May 7 18:02:33 2009

Master Resource Control: previous runlevel: N, switching to runlevel: 5
<notice>startproc: execve (/sbin/acpid) [ /sbin/acpid ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31a DO_CONFIRM= RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/openSUSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=60 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/ata-SAMSUNG_HD080HJP_S0DEJ10Y942996-part6 _=/sbin/startproc DAEMON=/sbin/acpid ]
<notice>startproc: execve (/sbin/syslog-ng) [ /sbin/syslog-ng ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin DO_CONFIRM= vga=0x31a RUNLEVEL=5 SPLASHCFG=/etc/bootsplash/themes/openSUSE/config/bootsplash-1280x1024.cfg PWD=/ PREVLEVEL=N LINES=60 SHLVL=2 HOME=/ SPLASH=yes splash=silent ROOTFS_BLKDEV=/dev/disk/by-id/ata-SAMSUNG_HD080HJP_S0DEJ10Y942996-part6 _=/sbin/startproc DAEMON=/sbin/syslog-ng ]
acpid: starting up


Starting acpid done
acpid: 2 rules loaded


<notice>startproc: execve (/sbin/klogd) [ /sbin/klogd -c 1 -x ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin DO_CONFIRM= vga=0x31a RUNLEVEL=5 SPLASHCFG=/etc/bootsplash/themes/openSUSE/config/bootsplash-1280x1024.cfg PWD=/ PREVLEVEL=N LINES=60 SHLVL=2 HOME=/ SPLASH=yes splash=silent ROOTFS_BLKDEV=/dev/disk/by-id/ata-SAMSUNG_HD080HJP_S0DEJ10Y942996-part6 _=/sbin/startproc DAEMON=/sbin/klogd ]
Starting syslog servicesdone
Starting D-Bus daemondone
Starting Firewall Initialization (phase 1 of 2) Initializing random number generatordone
done
Loading CPUFreq modulesdone
Starting HAL daemondone
Setting up (localfs) network interfaces:
lo
lo IP address: 127.0.0.1/8
IP address: 127.0.0.2/8
lo
done eth0 device: nVidia Corporation MCP51 Ethernet Controller (rev a1)
eth0 Starting DHCP4 client<notice>killproc: kill(1975,20)
<notice>killproc: kill(1986,1)
<notice>killproc: kill(1975,18)
<notice>killproc: kill(1975,12)
.
eth0 IP address: 192.168.2.32/24
eth0
doneSetting up service (localfs) network . . . . . . . . . .done
<notice>startproc: execve (/sbin/rpcbind) [ /sbin/rpcbind ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31a DO_CONFIRM= RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/openSUSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=60 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/ata-SAMSUNG_HD080HJP_S0DEJ10Y942996-part6 _=/sbin/startproc DAEMON=/sbin/rpcbind ]
Starting rpcbind done
Not starting NFS client services - no NFS found in /etc/fstab:unused
Starting service kdm<notice>startproc: execve (/usr/bin/kdm) [ /usr/bin/kdm ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 INIT_VERSION=sysvinit-2.86 KDEROOTHOME=/root/.kdm REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin DO_CONFIRM= vga=0x31a RUNLEVEL=5 SPLASHCFG=/etc/bootsplash/themes/openSUSE/config/bootsplash-1280x1024.cfg PWD=/ LANG=de_DE.UTF-8 PREVLEVEL=N LINES=60 QT_SYSTEM_DIR=/usr/share/desktop-data SHLVL=2 HOME=/ XCURSOR_THEME=DMZ WINDOWMANAGER=/usr/bin/startkde SPLASH=yes splash=silent ROOTFS_BLKDEV=/dev/disk/by-id/ata-SAMSUNG_HD080HJP_S0DEJ10Y942996-part6 _=/sbin/startproc DAEMON=/usr/bin/kdm ]
done
Loading console font lat9w-16.psfu -m trivial G0:loadable
doneLoading keymap assuming iso-8859-15 euro
Loading /usr/share/kbd/keymaps/i386/qwertz/de-latin1-nodeadkeys.map.gz
doneLoading compose table latin1.adddone
Start Unicode mode
done<notice>checkproc: /usr/bin/kdm 3013
<notice>checkproc: /usr/bin/kdm 3013
Starting auditd <notice>startproc: execve (/sbin/auditd) [ /sbin/auditd -s disable ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31a DO_CONFIRM= RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/openSUSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=60 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/ata-SAMSUNG_HD080HJP_S0DEJ10Y942996-part6 _=/sbin/startproc DAEMON=/sbin/auditd ]
done
Starting Avahi daemon done
<notice>killproc: kill(3001,15)
Starting cupsd<notice>startproc: execve (/usr/sbin/cupsd) [ /usr/sbin/cupsd ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31a DO_CONFIRM= RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/openSUSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=60 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/ata-SAMSUNG_HD080HJP_S0DEJ10Y942996-part6 _=/sbin/startproc DAEMON=/usr/sbin/cupsd ]
done
Starting java.binfmt_misc done
Setting up (remotefs) network interfaces:
Setting up service (remotefs) network . . . . . . . . . .done
Starting Name Service Cache Daemon<notice>startproc: execve (/usr/sbin/nscd) [ /usr/sbin/nscd ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31a DO_CONFIRM= RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/openSUSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=60 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/ata-SAMSUNG_HD080HJP_S0DEJ10Y942996-part6 _=/sbin/startproc DAEMON=/usr/sbin/nscd ]
done
Starting mail service (Postfix)done
<notice>startproc: execve (/usr/sbin/cron) [ /usr/sbin/cron ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31a DO_CONFIRM= RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/openSUSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=60 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/ata-SAMSUNG_HD080HJP_S0DEJ10Y942996-part6 _=/sbin/startproc DAEMON=/usr/sbin/cron ]
Starting CRON daemondone
Starting smartd done
Starting SSH daemon<notice>startproc: execve (/usr/sbin/sshd) [ /usr/sbin/sshd -o PidFile=/var/run/sshd.init.pid ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31a DO_CONFIRM= RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/openSUSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=60 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/ata-SAMSUNG_HD080HJP_S0DEJ10Y942996-part6 _=/sbin/startproc DAEMON=/usr/sbin/sshd ]
done
Starting Firewall Initialization (phase 2 of 2) done
done
Master Resource Control: runlevel 5 has been reached
Skipped services in runlevel 5: nfs
<notice>killproc: kill(1928,3)
linux-464k:/home/js #


das war's...

[Aqualung]

Linux version 2.6.27.21-0.1-pae

Versuchs mal mit dem ...-default-Kernel.

[Simpel]

Versuchs mal mit dem ...-default-Kernel.

Hmm, und wie mach ich das? In meinen Bootmenü steht der mit drin, bei meinen Nachbarn nicht. Muss ich da neu installieren?
Heute habe ich noch mal die Live-CD runtergeladen und gestartet. Auch da hing sich das System auf. Mehrmals, auch als es schon eine Weile lief.

[pferdefreund]

Wenn WIN-XP auch nicht sauber rennt, vermute ich mal ein Hardware-Problem.
Ich habe schon Debian Etch mit grafischer Oberfläche mit 64MB betrieben.
War zwar - wegen Paging grottenlangsam bei OO usw - aber es hat sich
nie !!! aufgeängt - man mußte halt Geduld haben. 500MB für Suse sollten eigentlich
ausreichen - mach mal ein free in der Konsole, wenn OO gestartet ist, da sieht man
mal, wies RAM-mäßig aussieht. Memtest ist auch immer ein guter Kanditat.
Hast du mal probiert, per ssh oder Telnet auf die Kiste zu kommen, so sie sich
aufgehängt hat. Wenn das noch geht, ist es eher ein Problem von X, bez dem
Grafik-Treiber. Ich hatte es schon, daß auch alt+f1,2,3 usw nicht mehr fruchteten,
um auf eine Konsole zu kommen - aber per ssh gings dann doch und ein
kill -9 pid des X-Servers führte problemlos zur "Wiederbelebung".
Ich bin Weidechef - ich darf das (X killen)