PDA

Archiv verlassen und diese Seite im Standarddesign anzeigen : Archlinux + Acer 5920g Media tasten und Mittlere-Buttons funktioniert nicht (mehr).



osmanovic100
29.03.09, 04:44
Hallo,

seit aktuelle xorg upgrade funktioniert das Synaptics Touchpad nicht mehr richtig. Erst wollte arch X nicht starten... aber hin und her fand ich heraus das evdev aktuell für Eingabegeräte sorgt. Ich habe dann alle Eingabegeräte in xorg.conf auskommentiert und siehe da gdm startete wie es sein soll...
was ich aber bemerkte ist, das die mittlere-tasten des Tochpad nicht reagieren. egal welche Einstellungen ich in "/usr/share/hal/fdi/policy/10osvendor/11-x11-synaptics.fdi" vornehme die Media tasten und mittlere-tasten wollen einfach nicht.

cat /var/log/Xorg.0.log

X.Org X Server 1.5.3
Release Date: 5 November 2008
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.27-ARCH x86_64
Current Operating System: Linux Pero-Laptop 2.6.28-ARCH #1 SMP PREEMPT Tue Mar 17 07:22:53 CET 2009 x86_64
Build Date: 17 December 2008 10:46:49PM

Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sat Mar 28 20:02:41 2009
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "X.org Configured"
(**) |-->Screen "Screen-LCD" (0)
(**) | |-->Monitor "LCD"
(**) | |-->Device "NVIDIA"
(==) Automatically adding devices
(==) Automatically enabling devices
(==) Including the default font path /usr/share/fonts/misc,/usr/share/fonts/100dpi:unscaled,/usr/share/fonts/75dpi:unscaled,/usr/share/fonts/TTF,/usr/share/fonts/Type1.
(**) FontPath set to:
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF,
/usr/share/fonts/Type1,
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF,
/usr/share/fonts/Type1
(**) ModulePath set to "/usr/lib/xorg/modules"
(**) Extension "Composite" is enabled
(II) Cannot locate a core pointer device.
(II) Cannot locate a core keyboard device.
(II) The server relies on HAL to provide the list of input devices.
If no devices become available, reconfigure HAL or disable AllowEmptyInput.
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) No APM support in BIOS or kernel
(II) Loader magic: 0x7b54e0
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 4.1
X.Org XInput driver : 2.1
X.Org Server Extension : 1.1
X.Org Font Renderer : 0.6
(II) Loader running on linux
(++) using VT number 7

(--) PCI:*(0@1:0:0) nVidia Corporation GeForce 8600M GT rev 161, Mem @ 0xf2000000/16777216, 0xd0000000/268435456, 0xf0000000/33554432, I/O @ 0x00002000/128
(II) System resource ranges:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "freetype" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri" will be loaded by default.
(II) LoadModule: "glx"

(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.0
Module class: X.Org Server Extension
(II) NVIDIA GLX Module 180.29 Thu Feb 5 00:05:47 PST 2009
(II) Loading extension GLX
(II) LoadModule: "extmod"

(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 1.1
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "xtrap"

(II) Loading /usr/lib/xorg/modules/extensions//libxtrap.so
(II) Module xtrap: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 1.1
(II) Loading extension DEC-XTRAP
(II) LoadModule: "dbe"

(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 1.1
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "freetype"

(II) Loading /usr/lib/xorg/modules/fonts//libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
compiled for 1.5.3, module version = 2.1.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.6
(II) Loading font FreeType
(II) LoadModule: "synaptics"

(II) Loading /usr/lib/xorg/modules/input//synaptics_drv.so
(II) Module synaptics: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 2.1
(II) LoadModule: "dri"

(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
ABI class: X.Org Server Extension, version 1.1
(II) Loading extension XFree86-DRI
(II) LoadModule: "nvidia"

(II) Loading /usr/lib/xorg/modules/drivers//nvidia_drv.so
(II) Module nvidia: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.0
Module class: X.Org Video Driver
(II) NVIDIA dlloader X Driver 180.29 Wed Feb 4 23:45:20 PST 2009
(II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
(II) Primary Device is: PCI 01@00:00:0
(II) Loading sub module "fb"
(II) LoadModule: "fb"

(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "wfb"
(II) LoadModule: "wfb"

(II) Loading /usr/lib/xorg/modules//libwfb.so
(II) Module wfb: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(II) resource ranges after probing:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
(**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
(==) NVIDIA(0): RGB weight 888
(==) NVIDIA(0): Default visual is TrueColor
(==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
(**) NVIDIA(0): Option "TripleBuffer" "True"
(**) NVIDIA(0): Option "AddARGBGLXVisuals" "True"
(**) NVIDIA(0): Option "DynamicTwinView" "False"
(**) NVIDIA(0): Option "PixmapCacheSize" "1000000"
(**) NVIDIA(0): Option "AllowSHMPixmaps" "0"
(**) NVIDIA(0): Enabling RENDER acceleration
(II) NVIDIA(0): Support for GLX with the Damage and Composite X extensions is
(II) NVIDIA(0): enabled.
(II) NVIDIA(0): NVIDIA GPU GeForce 8600M GT (G84) at PCI:1:0:0 (GPU-0)
(--) NVIDIA(0): Memory: 524288 kBytes
(--) NVIDIA(0): VideoBIOS: 60.84.41.00.18
(II) NVIDIA(0): Detected PCI Express Link width: 16X
(--) NVIDIA(0): Interlaced video modes are supported on this GPU
(--) NVIDIA(0): Connected display device(s) on GeForce 8600M GT at PCI:1:0:0:
(--) NVIDIA(0): AUO (DFP-0)
(--) NVIDIA(0): AUO (DFP-0): 330.0 MHz maximum pixel clock
(--) NVIDIA(0): AUO (DFP-0): Internal Dual Link LVDS
(II) NVIDIA(0): Assigned Display Device: DFP-0
(II) NVIDIA(0): Validated modes:
(II) NVIDIA(0): "nvidia-auto-select"
(II) NVIDIA(0): Virtual screen size determined to be 1280 x 800
(--) NVIDIA(0): DPI set to (98, 96); computed from "UseEdidDpi" X config
(--) NVIDIA(0): option
(**) NVIDIA(0): Enabling 32-bit ARGB GLX visuals.
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
(II) NVIDIA(0): Initialized GPU GART.
(II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
(II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
(II) NVIDIA(0): configuration option may not be set correctly. When the
(II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
(II) NVIDIA(0): try to use it to receive ACPI event notifications. For
(II) NVIDIA(0): details, please see the "ConnectToAcpid" and
(II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
(II) NVIDIA(0): Config Options in the README.
(II) NVIDIA(0): ACPI display change hotkey events enabled: the X server is new
(II) NVIDIA(0): enough to receive ACPI display change hotkey events.
(II) NVIDIA(0): Setting mode "nvidia-auto-select"
(II) Loading extension NV-GLX
(II) NVIDIA(0): NVIDIA 3D Acceleration Architecture Initialized
(==) NVIDIA(0): Disabling shared memory pixmaps
(II) NVIDIA(0): Using the NVIDIA 2D acceleration architecture
(==) NVIDIA(0): Backing store disabled
(==) NVIDIA(0): Silken mouse enabled
(II) NVIDIA(0): DPMS enabled
(II) Loading extension NV-CONTROL
(II) Loading extension XINERAMA
(==) RandR enabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
(II) Initializing extension GLX
(II) config/hal: Adding input device Macintosh mouse button emulation
(II) LoadModule: "evdev"

(II) Loading /usr/lib/xorg/modules/input//evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 2.1.2
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 2.1
(**) Macintosh mouse button emulation: always reports core events
(**) Macintosh mouse button emulation: Device: "/dev/input/event0"
(II) Macintosh mouse button emulation: Found 3 mouse buttons
(II) Macintosh mouse button emulation: Found x and y relative axes
(II) Macintosh mouse button emulation: Configuring as mouse
(**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
(**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
(II) config/hal: Adding input device PS/2 Synaptics TouchPad
(II) Synaptics touchpad driver version 1.0.0
(**) Option "Device" "/dev/input/event11"
(**) Option "SHMConfig" "true"
(**) Option "MaxTapTime" "0"
(**) Option "MaxTapMove" "0"
(**) Option "VertEdgeScroll" "1"
(**) Option "HorizEdgeScroll" "1"
(**) Option "TapButton1" "1"
(**) Option "TapButton2" "2"
(**) Option "TapButton3" "3"
(--) PS/2 Synaptics TouchPad: no supported touchpad found
(**) PS/2 Synaptics TouchPad: always reports core events
(II) XINPUT: Adding extended input device "PS/2 Synaptics TouchPad" (type: TOUCHPAD)
(--) PS/2 Synaptics TouchPad: no supported touchpad found
(II) config/hal: Adding input device PS/2 Synaptics TouchPad
(**) PS/2 Synaptics TouchPad: always reports core events
(**) PS/2 Synaptics TouchPad: Device: "/dev/input/event10"
(II) PS/2 Synaptics TouchPad: Found 3 mouse buttons
(II) PS/2 Synaptics TouchPad: Found x and y relative axes
(II) PS/2 Synaptics TouchPad: Configuring as mouse
(**) PS/2 Synaptics TouchPad: YAxisMapping: buttons 4 and 5
(**) PS/2 Synaptics TouchPad: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "PS/2 Synaptics TouchPad" (type: MOUSE)
(II) config/hal: Adding input device AT Translated Set 2 keyboard
(**) AT Translated Set 2 keyboard: always reports core events
(**) AT Translated Set 2 keyboard: Device: "/dev/input/event1"
(II) AT Translated Set 2 keyboard: Found keys
(II) AT Translated Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "de"
(II) config/hal: Adding input device MLK wireless mouse
(**) MLK wireless mouse: always reports core events
(**) MLK wireless mouse: Device: "/dev/input/event8"
(II) MLK wireless mouse: Found 6 mouse buttons
(II) MLK wireless mouse: Found x and y relative axes
(II) MLK wireless mouse: Found keys
(II) MLK wireless mouse: Configuring as mouse
(II) MLK wireless mouse: Configuring as keyboard
(**) MLK wireless mouse: YAxisMapping: buttons 4 and 5
(**) MLK wireless mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "MLK wireless mouse" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "de"
(II) config/hal: Adding input device Video Bus
(**) Video Bus: always reports core events
(**) Video Bus: Device: "/dev/input/event6"
(II) Video Bus: Found keys
(II) Video Bus: Configuring as keyboard
(II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "de"
AUDIT: Sat Mar 28 20:03:21 2009: 3118 Xorg: client 5 rejected from local host ( uid=1000 gid=100 pid=3137 )
AUDIT: Sat Mar 28 20:03:21 2009: 3118 Xorg: client 5 rejected from local host ( uid=1000 gid=100 pid=3138 )
AUDIT: Sat Mar 28 20:03:21 2009: 3118 Xorg: client 5 rejected from local host ( uid=1000 gid=100 pid=3139 )
(II) NVIDIA(0): Setting mode "nvidia-auto-select"
(WW) AT Translated Set 2 keyboard: unable to handle keycode 434
(EE) MLK wireless mouse: Read error: No such device
(II) config/hal: removing device MLK wireless mouse
(II) MLK wireless mouse: Close
(II) UnloadModule: "evdev"
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) No APM support in BIOS or kernel
(II) NVIDIA(0): Setting mode "nvidia-auto-select"
(II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
(II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
(II) NVIDIA(0): configuration option may not be set correctly. When the
(II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
(II) NVIDIA(0): try to use it to receive ACPI event notifications. For
(II) NVIDIA(0): details, please see the "ConnectToAcpid" and
(II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
(II) NVIDIA(0): Config Options in the README.
(II) NVIDIA(0): ACPI display change hotkey events enabled: the X server is new
(II) NVIDIA(0): enough to receive ACPI display change hotkey events.
(--) PS/2 Synaptics TouchPad: no supported touchpad found
(II) config/hal: Adding input device MLK wireless mouse
(**) MLK wireless mouse: always reports core events
(**) MLK wireless mouse: Device: "/dev/input/event8"
(II) MLK wireless mouse: Found 6 mouse buttons
(II) MLK wireless mouse: Found x and y relative axes
(II) MLK wireless mouse: Found keys
(II) MLK wireless mouse: Configuring as mouse
(II) MLK wireless mouse: Configuring as keyboard
(**) MLK wireless mouse: YAxisMapping: buttons 4 and 5
(**) MLK wireless mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "MLK wireless mouse" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "de"
(II) Macintosh mouse button emulation: Device reopened after 1 attempts.
(II) PS/2 Synaptics TouchPad: Device reopened after 1 attempts.
(II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
(II) Video Bus: Device reopened after 1 attempts.
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) No APM support in BIOS or kernel
(II) NVIDIA(0): Setting mode "nvidia-auto-select"
(II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
(II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
(II) NVIDIA(0): configuration option may not be set correctly. When the
(II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
(II) NVIDIA(0): try to use it to receive ACPI event notifications. For
(II) NVIDIA(0): details, please see the "ConnectToAcpid" and
(II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
(II) NVIDIA(0): Config Options in the README.
(II) NVIDIA(0): ACPI display change hotkey events enabled: the X server is new
(II) NVIDIA(0): enough to receive ACPI display change hotkey events.
(--) PS/2 Synaptics TouchPad: no supported touchpad found
(II) Macintosh mouse button emulation: Device reopened after 1 attempts.
(II) PS/2 Synaptics TouchPad: Device reopened after 1 attempts.
(II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
(II) Video Bus: Device reopened after 1 attempts.
(II) MLK wireless mouse: Device reopened after 1 attempts.

synclient -l

Parameter settings:
LeftEdge = 1900
RightEdge = 5400
TopEdge = 1900
BottomEdge = 4000
FingerLow = 25
FingerHigh = 30
FingerPress = 256
MaxTapTime = 0
MaxTapMove = 0
MaxDoubleTapTime = 180
SingleTapTimeout = 180
ClickTime = 100
FastTaps = 0
EmulateMidButtonTime = 75
EmulateTwoFingerMinZ = 257
VertScrollDelta = 100
HorizScrollDelta = 100
VertEdgeScroll = 1
HorizEdgeScroll = 1
CornerCoasting = 0
VertTwoFingerScroll = 0
HorizTwoFingerScroll = 0
MinSpeed = 0.4
MaxSpeed = 0.7
AccelFactor = 0.01
TrackstickSpeed = 40
EdgeMotionMinZ = 30
EdgeMotionMaxZ = 160
EdgeMotionMinSpeed = 1
EdgeMotionMaxSpeed = 400
EdgeMotionUseAlways = 0
UpDownScrolling = 1
LeftRightScrolling = 1
UpDownScrollRepeat = 1
LeftRightScrollRepeat = 1
ScrollButtonRepeat = 100
TouchpadOff = 0
GuestMouseOff = 0
LockedDrags = 0
LockedDragTimeout = 5000
RTCornerButton = 0
RBCornerButton = 0
LTCornerButton = 0
LBCornerButton = 0
TapButton1 = 1
TapButton2 = 2
TapButton3 = 3
ClickFinger1 = 1
ClickFinger2 = 3
ClickFinger3 = 2
CircularScrolling = 0
CircScrollDelta = 0.1
CircScrollTrigger = 0
CircularPad = 0
PalmDetect = 0
PalmMinWidth = 10
PalmMinZ = 200
CoastingSpeed = 0
PressureMotionMinZ = 30
PressureMotionMaxZ = 160
PressureMotionMinFactor = 1
PressureMotionMaxFactor = 1
GrabEventDevice = 1


cat /proc/bus/input/devices

I: Bus=0017 Vendor=0001 Product=0001 Version=0100
N: Name="Macintosh mouse button emulation"
P: Phys=
S: Sysfs=/devices/virtual/input/input0
U: Uniq=
H: Handlers=mouse0 event0
B: EV=7
B: KEY=70000 0 0 0 0
B: REL=3

I: Bus=0011 Vendor=0001 Product=0001 Version=ab41
N: Name="AT Translated Set 2 keyboard"
P: Phys=isa0060/serio0/input0
S: Sysfs=/devices/platform/i8042/serio0/input/input1
U: Uniq=
H: Handlers=kbd event1
B: EV=120013
B: KEY=10000 c020000000000 0 0 700f02000003 3802078f870f401 febfffdfffefffff ffffffffffffffff
B: MSC=10
B: LED=7

I: Bus=0019 Vendor=0000 Product=0002 Version=0000
N: Name="Power Button (FF)"
P: Phys=LNXPWRBN/button/input0
S: Sysfs=/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
U: Uniq=
H: Handlers=kbd event2
B: EV=3
B: KEY=10000000000000 0

I: Bus=0019 Vendor=0000 Product=0005 Version=0000
N: Name="Lid Switch"
P: Phys=PNP0C0D/button/input0
S: Sysfs=/devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input3
U: Uniq=
H: Handlers=event3
B: EV=21
B: SW=1

I: Bus=0019 Vendor=0000 Product=0001 Version=0000
N: Name="Power Button (CM)"
P: Phys=PNP0C0C/button/input0
S: Sysfs=/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4
U: Uniq=
H: Handlers=kbd event4
B: EV=3
B: KEY=10000000000000 0

I: Bus=0019 Vendor=0000 Product=0003 Version=0000
N: Name="Sleep Button (CM)"
P: Phys=PNP0C0E/button/input0
S: Sysfs=/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input5
U: Uniq=
H: Handlers=kbd event5
B: EV=3
B: KEY=4000 0 0

I: Bus=0019 Vendor=0000 Product=0006 Version=0000
N: Name="Video Bus"
P: Phys=/video/input0
S: Sysfs=/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/device:03/input/input6
U: Uniq=
H: Handlers=kbd event6
B: EV=3
B: KEY=3f000b00000000 0 0 0

I: Bus=0003 Vendor=064e Product=a101 Version=0100
N: Name="Acer CrystalEye webcam"
P: Phys=usb-0000:00:1a.7-2
S: Sysfs=/devices/pci0000:00/0000:00:1a.7/usb1/1-2/1-2:1.0/input/input7
U: Uniq=
H: Handlers=event7
B: EV=3
B: KEY=1 0 0 0 0

I: Bus=0010 Vendor=001f Product=0001 Version=0100
N: Name="PC Speaker"
P: Phys=isa0061/input0
S: Sysfs=/devices/platform/pcspkr/input/input9
U: Uniq=
H: Handlers=kbd event9
B: EV=40001
B: SND=6

I: Bus=0011 Vendor=0002 Product=0001 Version=0000
N: Name="PS/2 Synaptics TouchPad"
P: Phys=isa0060/serio3/input0
S: Sysfs=/devices/platform/i8042/serio3/input/input10
U: Uniq=
H: Handlers=mouse2 event10
B: EV=7
B: KEY=70000 0 0 0 0
B: REL=3

I: Bus=0011 Vendor=0002 Product=0001 Version=0000
N: Name="PS/2 Synaptics TouchPad"
P: Phys=isa0060/serio4/input0
S: Sysfs=/devices/platform/i8042/serio4/input/input11
U: Uniq=
H: Handlers=mouse3 event11
B: EV=7
B: KEY=70000 0 0 0 0
B: REL=3

I: Bus=0003 Vendor=046a Product=0106 Version=0110
N: Name="MLK wireless mouse"
P: Phys=usb-0000:00:1d.0-2/input0
S: Sysfs=/devices/pci0000:00/0000:00:1d.0/usb5/5-2/5-2:1.0/input/input12
U: Uniq=
H: Handlers=kbd mouse1 event8
B: EV=1f
B: KEY=837fff002c3027 bf00444400000000 1f0001 f848a27c000 667bfad9415fed 8e000000000000 0
B: REL=1c3
B: ABS=100000000
B: MSC=10

cat /etc/X11/xorg.conf

#Section "ServerFlags"
# Option "AutoAddDevices" "False"
# Option "AutoEnableDevices" "false"
#EndSection

Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen-LCD" 0 0
# InputDevice "USBMouse"
# InputDevice "Laptop-Keyboard" "CoreKeyboard"
# InputDevice "AcerMultimedia" "SendCoreEvents"
# InputDevice "Synaptics Touchpad" "CorePointer"
EndSection

Section "Files"
# RgbPath "/usr/share/X11/rgb"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/TTF"
FontPath "/usr/share/fonts/Type1"
EndSection

Section "Module"
# Load "dri"
# Load "record"
Load "glx"
Load "extmod"
Load "xtrap"
Load "dbe"
Load "freetype"
Load "synaptics"
EndSection

#Section "InputDevice"
# Identifier "Laptop-Keyboard"
# Driver "kbd"
# Option "XkbRules" "xorg"
# Option "XkbModel" "pc105"
# Option "XkbLayout" "de"
# Option "XkbVariant" "nodeadkeys"
# Option "XkbOptions" "lv3:ralt_switch"
# Option "CoreKeyboard"
#EndSection

#Section "InputDevice"
# Identifier "USBMouse"
# Driver "mouse"
## Option "CorePointer"
# Option "Protocol" "auto"
# Option "Device" "/dev/input/mice"
# Option "Emulate3Buttons" "true"
#EndSection

#Section "InputDevice"
# Identifier "AcerMultimedia"
# Driver "evdev"
## Option "Protocol" "event"
# Option "Device" "/dev/input/acermultimedia"
## Option "SendCoreEvents" "true" # neu
## Option "AlwaysCore" "off"
#EndSection

#Section "InputDevice"
# Identifier "Synaptics Touchpad"
# Driver "synaptics"
# Option "Protocol" "event"
# Option "SendCoreEvents" "true"
# Option "Device" "/dev/input/touchpad"
# Option "MinSpeed" "0.1"
# Option "MaxSpeed" "0.6"
# Option "MaxTapTime" "0"
# Option "MaxTapMove" "0"
## Option "ZAxisMapping" "10 11"
## Option "HorizScrollDelta" "1"
# Option "SHMConfig" "true"
#EndSection

Section "Monitor"
Identifier "LCD"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
EndSection

Section "Device"
Identifier "NVIDIA"
Driver "nvidia"
VendorName "nVidia Corporation"
BoardName "GeForce 8600M GT"
BusID "PCI:1:0:0"
# Option "DamageEvents" "True"
# Option "UseEvents" "True"
Option "TripleBuffer" "True"
Option "AddARGBGLXVisuals" "True"
# Option "BackingStore" "True"
## Option "Coolbits" "1" #aktiviert die Overlocking Funktion in nvidi$
Option "DynamicTwinView" "False"
Option "PixmapCacheSize" "1000000"
Option "AllowSHMPixmaps" "0"
EndSection

Section "Screen"
Identifier "Screen-LCD"
Device "NVIDIA"
Monitor "LCD"
DefaultDepth 24
SubSection "Display"
Depth 24
Modes "nvidia-auto-select"
EndSubSection
EndSection

#Section "DRI"
# Group "users"
# Mode 0660
#EndSection

Section "Extensions"
Option "Composite" "Enable"
EndSection

ich habe in xorg.conf das hier auskommentiert:

#Section "ServerFlags"
# Option "AutoAddDevices" "False"
# Option "AutoEnableDevices" "false"
#EndSection
so wie alle Eingabegeräte in xorg.conf aktiviert (wie beim alten) und es will einfach nicht.

der Tochbad lässt sich in gsynaptic aktivieren/deaktivieren alle andere funktionen funktionieren nicht.

was auch nicht funktioniert ist das Horiz./Vert.-Scrolling des Touchpad.

ist das ein Arch Bug? (mit Ubuntu funktionierts...ich will aber gerne bei Arch64 bleiben) Bitte um Hilfe!

MfG,
Osmanovic

osmanovic100
30.03.09, 14:04
Keine lösung? :(