PDA

Archiv verlassen und diese Seite im Standarddesign anzeigen : Problem mit SoundBlaster Audigy



DarkLevi
15.02.09, 18:35
hallo,
als erstes mal bin absoluter linux-noob, hoffe auf verständnis
ich nutze Kubuntu 8.04 mit KDE 3
mit 8.10 und KDE 4 hatte ich nur probs deswegen die ältere.

zu meinem problem: ich habe eine Creative SoundBlaster Audigy und eine OnBoard und ein headset mit usb-soundkarte und möchte dasses über die Creative düdelt ;)

alsa is vorinstalliert, und bevor ich jetzt irgendnen müll labere post ich einfach ma alles was interressant sein könnte:


hwinfo:
15: PCI 30c.0: 0401 Multimedia audio controller
[Created at pci.296]
UDI: /org/freedesktop/Hal/devices/pci_1102_7
Unique ID: nEtx.WCfr2+peI1A
Parent ID: 6NW+.c7JTK_YUBi2
SysFS ID: /devices/pci0000:00/0000:00:1e.0/0000:03:0c.0
SysFS BusID: 0000:03:0c.0
Hardware Class: sound
Model: "Creative SB Audigy LS"
Vendor: pci 0x1102 "Creative Labs"
Device: pci 0x0007 "SB Audigy LS"
SubVendor: pci 0x1102 "Creative Labs"
SubDevice: pci 0x100a
Driver: "CA0106"
Driver Modules: "snd_ca0106"
I/O Ports: 0xdf80-0xdf9f (rw)
IRQ: 20 (2 events)
Module Alias: "pci:v00001102d00000007sv00001102sd0000100Abc04sc01 i00"
Driver Info #0:
Driver Status: snd_ca0106 is active
Driver Activation Cmd: "modprobe snd_ca0106"
Config Status: cfg=new, avail=yes, need=no, active=unknown
Attached to: #25 (PCI bridge)

21: PCI 1f.5: 0401 Multimedia audio controller
[Created at pci.296]
UDI: /org/freedesktop/Hal/devices/pci_8086_24d5
Unique ID: W60f.Gpw6SvtFY3D
SysFS ID: /devices/pci0000:00/0000:00:1f.5
SysFS BusID: 0000:00:1f.5
Hardware Class: sound
Model: "ASUSTeK P4P800 Mainboard"
Vendor: pci 0x8086 "Intel Corporation"
Device: pci 0x24d5 "82801EB/ER (ICH5/ICH5R) AC'97 Audio Controller"
SubVendor: pci 0x1043 "ASUSTeK Computer Inc."
SubDevice: pci 0x80f3 "P4P800 Mainboard"
Revision: 0x02
Driver: "Intel ICH"
Driver Modules: "snd_intel8x0"
I/O Ports: 0xe800-0xe8ff (rw)
I/O Ports: 0xee80-0xeebf (rw)
Memory Range: 0xf7fff800-0xf7fff9ff (rw,non-prefetchable)
Memory Range: 0xf7fff400-0xf7fff4ff (rw,non-prefetchable)
IRQ: 21 (21362 events)
Module Alias: "pci:v00008086d000024D5sv00001043sd000080F3bc04sc01 i00"
Driver Info #0:
Driver Status: snd_intel8x0 is active
Driver Activation Cmd: "modprobe snd_intel8x0"
Config Status: cfg=new, avail=yes, need=no, active=unknown


cat /proc/asound/cards:
0 [ICH5 ]: ICH4 - Intel ICH5
Intel ICH5 with AD1985 at irq 21
1 [U0x41e0x4048 ]: USB-Audio - USB Device 0x41e:0x4048
USB Device 0x41e:0x4048 at usb-0000:00:1d.7-7.1, full speed
2 [Headset ]: USB-Audio - Logitech USB Headset
Logitech Logitech USB Headset at usb-0000:00:1d.3-2, full speed
3 [CX8801 ]: CX88x - Conexant CX8801
Conexant CX8801 at 0xf4000000
4 [CA0106 ]: CA0106 - CA0106
Audigy SE [SB0570] at 0xdf80 irq 20

alsamixer -c 4:
Card: CA0106 │
│ Chip: │
│ View: [Playback] Capture All │
│ Item: IEC958 [Off] │
│ │
│ ┌──┐ ┌──┐ ┌──┐ ┌──┐ ┌──┐ ┌──┐ ┌──┐ │
│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │
│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │
│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ >
│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ >
│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ >
│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ >
│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ >
│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ >
│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │
│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │
│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │
│ ┌──┐ └──┘ └──┘ └──┘ └──┘ ├──┤ ├──┤ ├──┤ │
│ │MM│ │OO│ │OO│ │OO│ │
│ └──┘ └──┘ └──┘ └──┘ │
│ 100<>100 100<>100 100<>100 100<>100 100<>100 100<>100 100<>100 │
│ < IEC958 >IEC958 C IEC958 F IEC958 R IEC958 U Analog C Analog F Analog R │


/etc/modprobe.d/alsa-base:
# autoloader aliases
install sound-slot-0 /sbin/modprobe snd-card-0
install sound-slot-1 /sbin/modprobe snd-card-1
install sound-slot-2 /sbin/modprobe snd-card-2
install sound-slot-3 /sbin/modprobe snd-card-3
install sound-slot-4 /sbin/modprobe snd-card-4
install sound-slot-5 /sbin/modprobe snd-card-5
install sound-slot-6 /sbin/modprobe snd-card-6
install sound-slot-7 /sbin/modprobe snd-card-7

# Cause optional modules to be loaded above generic modules
install snd /sbin/modprobe --ignore-install snd && { /sbin/modprobe --quiet snd-ioctl32 ; : ; }
install snd-pcm /sbin/modprobe --ignore-install snd-pcm && { /sbin/modprobe --quiet snd-pcm-oss ; : ; }
install snd-mixer /sbin/modprobe --ignore-install snd-mixer && { /sbin/modprobe --quiet snd-mixer-oss ; : ; }
install snd-seq /sbin/modprobe --ignore-install snd-seq && { /sbin/modprobe --quiet snd-seq-midi ; /sbin/modprobe --quiet snd-seq-oss ; : ; }
install snd-rawmidi /sbin/modprobe --ignore-install snd-rawmidi && { /sbin/modprobe --quiet snd-seq-midi ; : ; }
# Cause optional modules to be loaded above sound card driver modules
install snd-emu10k1 /sbin/modprobe --ignore-install snd-emu10k1 $CMDLINE_OPTS && { /sbin/modprobe -Qb snd-emu10k1-synth ; }
install snd-via82xx /sbin/modprobe --ignore-install snd-via82xx $CMDLINE_OPTS && { /sbin/modprobe -Qb snd-seq ; }

# Load saa7134-alsa instead of saa7134 (which gets dragged in by it anyway)
install saa7134 /sbin/modprobe --ignore-install saa7134 $CMDLINE_OPTS && { /sbin/modprobe -Qb saa7134-alsa ; : ; }

# Load snd-seq for devices that don't have hardware midi;
# Ubuntu #26283, #43682, #56005; works around Ubuntu #34831 for
# non-Creative Labs PCI hardware
install snd /sbin/modprobe --ignore-install snd && { /sbin/modprobe -Qb snd-seq ; }
# Prevent abnormal drivers from grabbing index 0
options bt87x index=-2
options cx88_alsa index=-2
options saa7134-alsa index=-2
options snd-atiixp-modem index=-2
options snd-intel8x0m index=-2
options snd-via82xx-modem index=-2
options snd-usb-audio index=-2
options snd-usb-usx2y index=-2
options snd-usb-caiaq index=-2
options snd_ca0106 index=0
# Ubuntu #62691, enable MPU for snd-cmipci
options snd-cmipci mpu_port=0x330 fm_port=0x388

hoffe jemand kann mir helfen
gruß levi

buzz768
15.02.09, 19:43
Du könntest z.B. in deinem Home-Verzeichnis eine Datei .asoundrc mit folgendem Inhalt erstellen


pcm.!default {
type hw
card CA0106
}
ctl.!default {
type hw
card CA0106
}

DarkLevi
15.02.09, 19:49
super danke für die schnelle antwort, werds gleich ausprobieren

DarkLevi
15.02.09, 21:16
funktioniert leider net, hab aber auch grad kubuntu runtergeschmissen und werd mir jetzt ma ubuntu zu gemüte führn, da sich alles geupdatet hat ich wieder kde 4 hatte welches sich prompt beim schließen von konqueror aufgehangen hat *würg*

buzz768
16.02.09, 08:06
Erklär doch mal genauer, worin das Problem besteht. Ich hatte dich so verstanden, dass die Soundausgabe über z.B. die Onboard Soundkarte erfolgt, statt, wie gewünscht, über die Creative Karte. Mit obiger .asoundrc wird diese lediglich zur Default-Karte. Du kannst den Programmen auch sagen, welche Karte sie nutzen sollen, z.B.


mplayer -ao alsa:device=hw=4.0 audiofile.mp3

Sollte auch das nicht gehen, im Mixer mal kontrollieren, ob die Regler (Master, PCM) hochgedreht und nicht stummgeschaltet sind. Ansonsten mal bei http://wiki.ubuntuusers.de/Soundkarten vorbeischauen.