smart001
08.01.09, 17:56
Hallo!
Auch ich bin neu hier und hoffe hier auf Hilfe, denn der Support von 1und1 konnte mir nicht wirklich helfen.
Leider habe ich in den bestehenden Threads auch keine Lösung gefunden.
Nach einem Neustart des Servers ging nichts mehr.
Bin leider auch nicht der 100%-ige Linux-Profi.
Folgende Befehle hab ich im Boot-Modus / Rescue-System ausgeführt
fdisk –l
Disk /dev/sda: 160.0 GB, 160041885696 bytes
255 heads, 63 sectors/track, 19457 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/sda1 1 128 1028128+ fd Linux raid autodetect
/dev/sda2 129 383 2048287+ 82 Linux swap / Solaris
/dev/sda4 384 19457 153211905 5 Extended
/dev/sda5 384 1021 5124703+ fd Linux raid autodetect
/dev/sda6 1022 1659 5124703+ fd Linux raid autodetect
/dev/sda7 1660 4209 20482843+ fd Linux raid autodetect
/dev/sda8 4210 19457 122479528+ fd Linux raid autodetect
Disk /dev/sdb: 160.0 GB, 160041885696 bytes
255 heads, 63 sectors/track, 19457 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/sdb1 1 128 1028128+ fd Linux raid autodetect
/dev/sdb2 129 383 2048287+ 82 Linux swap / Solaris
/dev/sdb4 384 19457 153211905 5 Extended
/dev/sdb5 384 1021 5124703+ fd Linux raid autodetect
/dev/sdb6 1022 1659 5124703+ fd Linux raid autodetect
/dev/sdb7 1660 4209 20482843+ fd Linux raid autodetect
/dev/sdb8 4210 19457 122479528+ fd Linux raid autodetect
Disk /dev/md8: 125.4 GB, 125418930176 bytes
2 heads, 4 sectors/track, 30619856 cylinders
Units = cylinders of 8 * 512 = 4096 bytes
Disk /dev/md8 doesn't contain a valid partition table
Disk /dev/md7: 20.9 GB, 20974338048 bytes
2 heads, 4 sectors/track, 5120688 cylinders
Units = cylinders of 8 * 512 = 4096 bytes
Disk /dev/md7 doesn't contain a valid partition table
Disk /dev/md6: 5247 MB, 5247598592 bytes
2 heads, 4 sectors/track, 1281152 cylinders
Units = cylinders of 8 * 512 = 4096 bytes
Disk /dev/md6 doesn't contain a valid partition table
Disk /dev/md5: 5247 MB, 5247598592 bytes
2 heads, 4 sectors/track, 1281152 cylinders
Units = cylinders of 8 * 512 = 4096 bytes
Disk /dev/md5 doesn't contain a valid partition table
Disk /dev/md1: 1052 MB, 1052704768 bytes
2 heads, 4 sectors/track, 257008 cylinders
Units = cylinders of 8 * 512 = 4096 bytes
hab dann eine Prüfung der Filesysteme gemacht
fsck -y /dev/sda1
xfs_repair /dev/sda5
xfs_repair /dev/sda6
xfs_repair /dev/sda7
xfs_repair /dev/sda8
und Lokale-System mit /mnt
mount /dev/md1 /mnt
mount /dev/md5 /mnt/usr/
mount /dev/md6 /mnt/var/
mount /dev/md7 /mnt/home
mount /dev/md8 /mnt/srv
chroot /mnt
dann wollte ich die boot.msg aufrufen, und bei der eingabe
www:~ # ls -la /var/log/boot.msg
erscheint
bash: www:~: command not found
Wollte mir dann über die Serielle Konsole den Bootvorgang anschaun,
aber da hab ich das Problem das wenn ich mich dort anmelde, er mir sagt
das das Passwort nicht stimmt. Vielleicht mach ich auch was falsch ?
Ich benutze dafür Putty stell diesen auf SSH gebe den Konsolenserver ein, starte
das ganze, dann fragt er mich nach login as: und danach nach dem Passwort
Und nach der Passwort eingabe erscheint: Access denied
Using keyboard-interactive authentication.
Weiss echt nicht mehr weiter...:confused:
Danke für eure Hilfe!
Marko
Auch ich bin neu hier und hoffe hier auf Hilfe, denn der Support von 1und1 konnte mir nicht wirklich helfen.
Leider habe ich in den bestehenden Threads auch keine Lösung gefunden.
Nach einem Neustart des Servers ging nichts mehr.
Bin leider auch nicht der 100%-ige Linux-Profi.
Folgende Befehle hab ich im Boot-Modus / Rescue-System ausgeführt
fdisk –l
Disk /dev/sda: 160.0 GB, 160041885696 bytes
255 heads, 63 sectors/track, 19457 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/sda1 1 128 1028128+ fd Linux raid autodetect
/dev/sda2 129 383 2048287+ 82 Linux swap / Solaris
/dev/sda4 384 19457 153211905 5 Extended
/dev/sda5 384 1021 5124703+ fd Linux raid autodetect
/dev/sda6 1022 1659 5124703+ fd Linux raid autodetect
/dev/sda7 1660 4209 20482843+ fd Linux raid autodetect
/dev/sda8 4210 19457 122479528+ fd Linux raid autodetect
Disk /dev/sdb: 160.0 GB, 160041885696 bytes
255 heads, 63 sectors/track, 19457 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/sdb1 1 128 1028128+ fd Linux raid autodetect
/dev/sdb2 129 383 2048287+ 82 Linux swap / Solaris
/dev/sdb4 384 19457 153211905 5 Extended
/dev/sdb5 384 1021 5124703+ fd Linux raid autodetect
/dev/sdb6 1022 1659 5124703+ fd Linux raid autodetect
/dev/sdb7 1660 4209 20482843+ fd Linux raid autodetect
/dev/sdb8 4210 19457 122479528+ fd Linux raid autodetect
Disk /dev/md8: 125.4 GB, 125418930176 bytes
2 heads, 4 sectors/track, 30619856 cylinders
Units = cylinders of 8 * 512 = 4096 bytes
Disk /dev/md8 doesn't contain a valid partition table
Disk /dev/md7: 20.9 GB, 20974338048 bytes
2 heads, 4 sectors/track, 5120688 cylinders
Units = cylinders of 8 * 512 = 4096 bytes
Disk /dev/md7 doesn't contain a valid partition table
Disk /dev/md6: 5247 MB, 5247598592 bytes
2 heads, 4 sectors/track, 1281152 cylinders
Units = cylinders of 8 * 512 = 4096 bytes
Disk /dev/md6 doesn't contain a valid partition table
Disk /dev/md5: 5247 MB, 5247598592 bytes
2 heads, 4 sectors/track, 1281152 cylinders
Units = cylinders of 8 * 512 = 4096 bytes
Disk /dev/md5 doesn't contain a valid partition table
Disk /dev/md1: 1052 MB, 1052704768 bytes
2 heads, 4 sectors/track, 257008 cylinders
Units = cylinders of 8 * 512 = 4096 bytes
hab dann eine Prüfung der Filesysteme gemacht
fsck -y /dev/sda1
xfs_repair /dev/sda5
xfs_repair /dev/sda6
xfs_repair /dev/sda7
xfs_repair /dev/sda8
und Lokale-System mit /mnt
mount /dev/md1 /mnt
mount /dev/md5 /mnt/usr/
mount /dev/md6 /mnt/var/
mount /dev/md7 /mnt/home
mount /dev/md8 /mnt/srv
chroot /mnt
dann wollte ich die boot.msg aufrufen, und bei der eingabe
www:~ # ls -la /var/log/boot.msg
erscheint
bash: www:~: command not found
Wollte mir dann über die Serielle Konsole den Bootvorgang anschaun,
aber da hab ich das Problem das wenn ich mich dort anmelde, er mir sagt
das das Passwort nicht stimmt. Vielleicht mach ich auch was falsch ?
Ich benutze dafür Putty stell diesen auf SSH gebe den Konsolenserver ein, starte
das ganze, dann fragt er mich nach login as: und danach nach dem Passwort
Und nach der Passwort eingabe erscheint: Access denied
Using keyboard-interactive authentication.
Weiss echt nicht mehr weiter...:confused:
Danke für eure Hilfe!
Marko