Archiv verlassen und diese Seite im Standarddesign anzeigen : Keine HVM Unterstützung?
Hallo,
ich möchte gerne unter XEN auch nicht modifizierte Systeme einsetzen über HVM. Nun hab ich gelesen, dass man mit
cat /proc/cpuinfo
bei einem AMD-Prozessor das Flag "svm" haben muss, um HVM-Unterstützung zu besitzen.
Leider fehlt bei mir dieses Flag. Ich habe einen AMD 9950 auf einem Asus M2N-SLI Deluxe mit der Firmware 1604 laufen. Virtualisierung ist im BIOS eingeschaltet.
Fehlt mir jetzt tatsächlich der HVM-Support und ich muss mir ein neues Board kaufen oder was ist los?
Danke!
Hallo pbrille,
was gibt dir den cat /proc/cpuinfo aus?
Grüße
thounder
Wenn ich folgendes boote:
xen 3.2.2 kernel 2.6.18.8-xen:
agician:~# cat /proc/cpuinfo
processor : 0
vendor_id : AuthenticAMD
cpu family : 16
model : 2
model name : AMD Phenom(tm) 9950 Quad-Core Processor
stepping : 3
cpu MHz : 2612.072
cache size : 512 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 5
wp : yes
flags : fpu de tsc msr pae cx8 apic mtrr cmov pat clflush mmx fxsr sse sse2 ht nx mmxext fxsr_opt 3dnowext 3dnow constant_tsc pni cmp_legacy cr8legacy ts ttp tm stc [6] [7] [8]
bogomips : 5227.92
processor : 1
vendor_id : AuthenticAMD
cpu family : 16
model : 2
model name : AMD Phenom(tm) 9950 Quad-Core Processor
stepping : 3
cpu MHz : 2612.072
cache size : 512 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 5
wp : yes
flags : fpu de tsc msr pae cx8 apic mtrr cmov pat clflush mmx fxsr sse sse2 ht nx mmxext fxsr_opt 3dnowext 3dnow constant_tsc pni cmp_legacy cr8legacy ts ttp tm stc [6] [7] [8]
bogomips : 5227.92
processor : 2
vendor_id : AuthenticAMD
cpu family : 16
model : 2
model name : AMD Phenom(tm) 9950 Quad-Core Processor
stepping : 3
cpu MHz : 2612.072
cache size : 512 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 5
wp : yes
flags : fpu de tsc msr pae cx8 apic mtrr cmov pat clflush mmx fxsr sse sse2 ht nx mmxext fxsr_opt 3dnowext 3dnow constant_tsc pni cmp_legacy cr8legacy ts ttp tm stc [6] [7] [8]
bogomips : 5227.92
processor : 3
vendor_id : AuthenticAMD
cpu family : 16
model : 2
model name : AMD Phenom(tm) 9950 Quad-Core Processor
stepping : 3
cpu MHz : 2612.072
cache size : 512 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 5
wp : yes
flags : fpu de tsc msr pae cx8 apic mtrr cmov pat clflush mmx fxsr sse sse2 ht nx mmxext fxsr_opt 3dnowext 3dnow constant_tsc pni cmp_legacy cr8legacy ts ttp tm stc [6] [7] [8]
bogomips : 5227.92
wenn ich jedoch den normalen ungepatchten Kernel starte (2.6.18-6-486):
magician:~# cat /proc/cpuinfo
processor : 0
vendor_id : AuthenticAMD
cpu family : 16
model : 2
model name : AMD Phenom(tm) 9950 Quad-Core Processor
stepping : 3
cpu MHz : 2612.067
cache size : 512 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 5
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt rdtscp lm 3dnowext 3dnow constant_tsc pni monitor cx16 lahf_lm cmp_legacy svm cr8legacy ts ttp tm stc [6] [7] [8]
bogomips : 5227.97
Hi pbrille,
für dich ist das flag svm wichtig! Das sagt aus ob HVM geht oder nicht.
Es scheint so, dass dein Xen-Kernel keinen Support für svm --> hvm hat.
Was ist das für ein System? Debian oder oder oder
Hast du die hvm version installiert?
Grüße
thounder
stefan.becker
22.12.08, 17:46
Der Phenom sollte das eigentlich haben. Ist das eventuell im Bios ausgeschaltet? Eventuell auch mal beim Hersteller nach einem Bios Update sehen, wenn das Problem bekannt ist.
Die CPU hat die Funktion mit dem normalen Kernel ja. Ich denke das der Xen Kernel keinen HVM Support hat ...
Powered by vBulletin® Version 4.2.5 Copyright ©2024 Adduco Digital e.K. und vBulletin Solutions, Inc. Alle Rechte vorbehalten.