zorck
03.10.08, 21:06
Hallo,
ich suche schon seit Tagen das www durch und komme einfach nicht weiter.
Meine Creative Pro EMU 0404 wird beim Booten zunächst fein säuberlich erkannt. Allerdings scheitert das Aktivieren an der emu_hana firmware.
[ 13.943007] parport_pc 00:0a: reported by Plug and Play ACPI
[ 13.943073] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP]
[ 14.085647] parport_pc 00:0a: driver attached
[ 14.145383] ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17
[ 14.145383] ACPI: PCI Interrupt 0000:05:07.0[A] -> Link [APC2] -> GSI 17 (lev
el, low) -> IRQ 17
[ 14.145537] emu1010: Special config.
[ 14.145657] emu1010: EMU_HANA_ID=0x7f
[ 14.145694] emu1010: filename emu/emu0404.fw testing
[ 14.145733] firmware: requesting emu/emu0404.fw
[ 14.190343] firmware size=0xd67c
[ 20.259813] emu1010: Loading Hana Firmware file failed, reg=0x7f
[ 26.322882] ACPI: PCI interrupt for device 0000:05:07.0 disabled
Die Firmware befindet sich aber genau wie emu0404.fw in /lib/firmware/emu.
lspci ergibt:
00:0f.0 IDE interface: nVidia Corporation MCP51 Serial ATA Controller (rev a1)
00:10.0 PCI bridge: nVidia Corporation MCP51 PCI Bridge (rev a2)
00:14.0 Bridge: nVidia Corporation MCP51 Ethernet Controller (rev a3)
01:00.0 VGA compatible controller: nVidia Corporation G70 [GeForce 7600 GT] (rev a1)
04:00.0 SATA controller: JMicron Technologies, Inc. JMicron 20360/20363 AHCI Controller (rev 02)
05:07.0 Multimedia audio controller: Creative Labs SB Audigy (rev 03)
lspci -n ergibt
00:10.0 0604: 10de:026f (rev a2)
00:14.0 0680: 10de:0269 (rev a3)
01:00.0 0300: 10de:0391 (rev a1)
04:00.0 0106: 197b:2360 (rev 02)
05:07.0 0401: 1102:0004 (rev 03)
Ich habe hier Debian sid mit Kernel 2.6.26-1-amd64 und ALSA 1.0.16 am Laufen.
Achja. alsaconf läuft so ab:
Unloading ALSA sound driver modules: snd-pcm-oss snd-mixer-oss snd-emu10k1-synth snd-emux-synth snd-seq-virmidi snd-seq-midi-emul snd-emu10k1 snd-seq-midi snd-rawmidi snd-ac97-codec snd-pcm snd-page-alloc snd-util-mem snd-hwdep snd-seq-dummy snd-seq-oss snd-seq-midi-event snd-seq snd-timer snd-seq-device.
Building card database...
Loading driver...
Setting default volumes...
amixer: Mixer attach default error: No such file or directory
================================================== =============================
Now ALSA is ready to use.
For adjustment of volumes, use your favorite mixer.
Have a lot of fun!
Hat einer von euch eine Idee?
ich suche schon seit Tagen das www durch und komme einfach nicht weiter.
Meine Creative Pro EMU 0404 wird beim Booten zunächst fein säuberlich erkannt. Allerdings scheitert das Aktivieren an der emu_hana firmware.
[ 13.943007] parport_pc 00:0a: reported by Plug and Play ACPI
[ 13.943073] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP]
[ 14.085647] parport_pc 00:0a: driver attached
[ 14.145383] ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17
[ 14.145383] ACPI: PCI Interrupt 0000:05:07.0[A] -> Link [APC2] -> GSI 17 (lev
el, low) -> IRQ 17
[ 14.145537] emu1010: Special config.
[ 14.145657] emu1010: EMU_HANA_ID=0x7f
[ 14.145694] emu1010: filename emu/emu0404.fw testing
[ 14.145733] firmware: requesting emu/emu0404.fw
[ 14.190343] firmware size=0xd67c
[ 20.259813] emu1010: Loading Hana Firmware file failed, reg=0x7f
[ 26.322882] ACPI: PCI interrupt for device 0000:05:07.0 disabled
Die Firmware befindet sich aber genau wie emu0404.fw in /lib/firmware/emu.
lspci ergibt:
00:0f.0 IDE interface: nVidia Corporation MCP51 Serial ATA Controller (rev a1)
00:10.0 PCI bridge: nVidia Corporation MCP51 PCI Bridge (rev a2)
00:14.0 Bridge: nVidia Corporation MCP51 Ethernet Controller (rev a3)
01:00.0 VGA compatible controller: nVidia Corporation G70 [GeForce 7600 GT] (rev a1)
04:00.0 SATA controller: JMicron Technologies, Inc. JMicron 20360/20363 AHCI Controller (rev 02)
05:07.0 Multimedia audio controller: Creative Labs SB Audigy (rev 03)
lspci -n ergibt
00:10.0 0604: 10de:026f (rev a2)
00:14.0 0680: 10de:0269 (rev a3)
01:00.0 0300: 10de:0391 (rev a1)
04:00.0 0106: 197b:2360 (rev 02)
05:07.0 0401: 1102:0004 (rev 03)
Ich habe hier Debian sid mit Kernel 2.6.26-1-amd64 und ALSA 1.0.16 am Laufen.
Achja. alsaconf läuft so ab:
Unloading ALSA sound driver modules: snd-pcm-oss snd-mixer-oss snd-emu10k1-synth snd-emux-synth snd-seq-virmidi snd-seq-midi-emul snd-emu10k1 snd-seq-midi snd-rawmidi snd-ac97-codec snd-pcm snd-page-alloc snd-util-mem snd-hwdep snd-seq-dummy snd-seq-oss snd-seq-midi-event snd-seq snd-timer snd-seq-device.
Building card database...
Loading driver...
Setting default volumes...
amixer: Mixer attach default error: No such file or directory
================================================== =============================
Now ALSA is ready to use.
For adjustment of volumes, use your favorite mixer.
Have a lot of fun!
Hat einer von euch eine Idee?