Aqualung
29.09.08, 13:37
Hallo,
gegeben folgender Rechner:
lspci
0000:00:00.0 Host bridge: Silicon Integrated Systems [SiS] 661FX/M661FX/M661MX Host (rev 11)
0000:00:01.0 PCI bridge: Silicon Integrated Systems [SiS]: Unknown device 0003
0000:00:02.0 ISA bridge: Silicon Integrated Systems [SiS] SiS963 [MuTIOL Media IO] (rev 25)
0000:00:02.1 SMBus: Silicon Integrated Systems [SiS] SiS961/2 SMBus Controller
0000:00:02.5 IDE interface: Silicon Integrated Systems [SiS] 5513 [IDE]
0000:00:02.7 Multimedia audio controller: Silicon Integrated Systems [SiS] Sound Controller (rev a0)
0000:00:03.0 USB Controller: Silicon Integrated Systems [SiS] USB 1.0 Controller (rev 0f)
0000:00:03.1 USB Controller: Silicon Integrated Systems [SiS] USB 1.0 Controller (rev 0f)
0000:00:03.3 USB Controller: Silicon Integrated Systems [SiS] USB 2.0 Controller
0000:00:04.0 Ethernet controller: Silicon Integrated Systems [SiS] SiS900 PCI Fast Ethernet (rev 91)
fdisk -l
Disk /dev/hda: 120.0 GB, 120034123776 bytes
255 heads, 63 sectors/track, 14593 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/hda1 1 14491 116398926 fd Linux raid autodetect
/dev/hda2 14492 14555 514080 82 Linux swap / Solaris
/dev/hda3 14556 14592 297202+ 83 Linux
Disk /dev/hdb: 120.0 GB, 120034123776 bytes
255 heads, 63 sectors/track, 14593 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/hdb1 1 14491 116398926 fd Linux raid autodetect
/dev/hdb2 14492 14592 811282+ 82 Linux swap / Solaris
Disk /dev/md0: 119.1 GB, 119192420352 bytes
2 heads, 4 sectors/track, 29099712 cylinders
Units = cylinders of 8 * 512 = 4096 bytes
cat /proc/mdstat
Personalities : [raid1]
md0 : active raid1 hda1[0] hdb1[1]
116398848 blocks [2/2] [UU]
Wie würdet Ihr eine Spiegelung des RAID für backup angehen? Kann das mit einer einzelnen externen USB-Platte gemacht werden?
gegeben folgender Rechner:
lspci
0000:00:00.0 Host bridge: Silicon Integrated Systems [SiS] 661FX/M661FX/M661MX Host (rev 11)
0000:00:01.0 PCI bridge: Silicon Integrated Systems [SiS]: Unknown device 0003
0000:00:02.0 ISA bridge: Silicon Integrated Systems [SiS] SiS963 [MuTIOL Media IO] (rev 25)
0000:00:02.1 SMBus: Silicon Integrated Systems [SiS] SiS961/2 SMBus Controller
0000:00:02.5 IDE interface: Silicon Integrated Systems [SiS] 5513 [IDE]
0000:00:02.7 Multimedia audio controller: Silicon Integrated Systems [SiS] Sound Controller (rev a0)
0000:00:03.0 USB Controller: Silicon Integrated Systems [SiS] USB 1.0 Controller (rev 0f)
0000:00:03.1 USB Controller: Silicon Integrated Systems [SiS] USB 1.0 Controller (rev 0f)
0000:00:03.3 USB Controller: Silicon Integrated Systems [SiS] USB 2.0 Controller
0000:00:04.0 Ethernet controller: Silicon Integrated Systems [SiS] SiS900 PCI Fast Ethernet (rev 91)
fdisk -l
Disk /dev/hda: 120.0 GB, 120034123776 bytes
255 heads, 63 sectors/track, 14593 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/hda1 1 14491 116398926 fd Linux raid autodetect
/dev/hda2 14492 14555 514080 82 Linux swap / Solaris
/dev/hda3 14556 14592 297202+ 83 Linux
Disk /dev/hdb: 120.0 GB, 120034123776 bytes
255 heads, 63 sectors/track, 14593 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/hdb1 1 14491 116398926 fd Linux raid autodetect
/dev/hdb2 14492 14592 811282+ 82 Linux swap / Solaris
Disk /dev/md0: 119.1 GB, 119192420352 bytes
2 heads, 4 sectors/track, 29099712 cylinders
Units = cylinders of 8 * 512 = 4096 bytes
cat /proc/mdstat
Personalities : [raid1]
md0 : active raid1 hda1[0] hdb1[1]
116398848 blocks [2/2] [UU]
Wie würdet Ihr eine Spiegelung des RAID für backup angehen? Kann das mit einer einzelnen externen USB-Platte gemacht werden?