suse 11 update probleme

[husky]

Hallo an alle !!
habe folgendes prob habe einen update von 10.3 auf 11 gemacht, alles hat wunderbar funktioniert nur leider bleibt nach kurzer Zeit die Maus und Tastatur hängen (logitech easy call desktop/mouse usb wireless, unter win xp welches ich jetzt notgedrungen nutzen muss ist es ok ) d.h. kann nichts mehr einstellen. gibt es eine Möglichkeit ohne gui eine system startdatei auszulesen bzw. das system zu rep. oder könnte ggf eine ps2 mouse noch funktionieren ?
würde mich über jede hilfe freuen !!

Ja, ich weiß man sollte kein update machen sondern neu installieren.....
hilft mir jetzt aber nicht da die platte sehr voll ist ....

[marce]

Über Strg-Alt-F[123456] solltest Du an eine Textkonsole gelangen...

Je nach Konfiguration des X-Servers sollte aber auch eine PS2-Maus auf Anhieb funktionieren...

[Aqualung]

dmesg | grep -i usb
sudo tail -5000 /var/log/messages | grep -i usb

[husky]

Wow das ging schnell danke für die hilfe werde ich gleich mal probieren und mich dann wieder melden :D

[Wene]

Sollte die Tastatur tatsächlich überhaupt nicht mehr reagieren wird auch ein CTRL+ALT+Fx nicht mehr helfen. In diesem Fall würde ich raten, das System direkt in Runlevel 3 zu starten. Dazu einfach in GRUB eine "3" als Bootparameter eintippen.

[husky]

zur Zeit habe ich eine PS2 tastatur+ Maus sowie die wireless maus u. Tastatur zusammen angeschlossen und das system ist seit 10 min scheinbar stabil mir sagen die reports leider nichts kann jemand mit diesen report etwas anfangen ?
oder wäre eine Neuinstallation ratsam ?

linux-mario:~ # dmesg | grep -i usb
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
USB Universal Host Controller Interface driver v3.0
uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: UHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.25.5-1.1-pae uhci_hcd
usb usb1: SerialNumber: 0000:00:10.0
ehci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:10.3: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.25.5-1.1-pae ehci_hcd
usb usb2: SerialNumber: 0000:00:10.3
uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.25.5-1.1-pae uhci_hcd
usb usb3: SerialNumber: 0000:00:10.1
uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.25.5-1.1-pae uhci_hcd
usb usb4: SerialNumber: 0000:00:10.2
hub 2-0:1.0: unable to enumerate USB device on port 2
usb 1-2: new full speed USB device using uhci_hcd and address 2
usb 1-2: configuration #1 chosen from 1 choice
hub 1-2:1.0: USB hub found
usb 1-2: New USB device found, idVendor=0451, idProduct=2036
usb 1-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 1-2: Product: General Purpose USB Hub
usb 1-2.1: new full speed USB device using uhci_hcd and address 3
usb 1-2.1: configuration #1 chosen from 1 choice
usb 1-2.1: New USB device found, idVendor=046d, idProduct=c51c
usb 1-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-2.1: Product: VoIP USB Dual RF Receiver
usb 1-2.1: Manufacturer: Logitech
usb 1-2.2: new full speed USB device using uhci_hcd and address 4
usb 1-2.2: configuration #1 chosen from 1 choice
usb 1-2.2: New USB device found, idVendor=046d, idProduct=0a06
usb 1-2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-2.2: Product: EasyCall Speakerphone
usb 1-2.2: Manufacturer: Logitech
usbcore: registered new interface driver hiddev
input: Logitech VoIP USB Dual RF Receiver as /devices/pci0000:00/0000:00:10.0/usb1/1-2/1-2.1/1-2.1:1.0/input/input6
input,hidraw0: USB HID v1.11 Keyboard [Logitech VoIP USB Dual RF Receiver] on usb-0000:00:10.0-2.1
input: Logitech VoIP USB Dual RF Receiver as /devices/pci0000:00/0000:00:10.0/usb1/1-2/1-2.1/1-2.1:1.1/input/input7
input,hiddev96,hidraw1: USB HID v1.11 Mouse [Logitech VoIP USB Dual RF Receiver] on usb-0000:00:10.0-2.1
usbcore: registered new interface driver usbhid
drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
usbcore: registered new interface driver snd-usb-audio

linux-mario:~ # sudo tail -5000 /var/log/messages | grep -i usb
Aug 7 02:12:37 linux-mario kernel: usbcore: deregistering interface driver snd-usb-audio
Aug 7 15:34:18 linux-mario kernel: hub 2-0:1.0: unable to enumerate USB device on port 2
Aug 7 15:34:18 linux-mario kernel: usb 1-2: new full speed USB device using uhci_hcd and address 2
Aug 7 15:34:18 linux-mario kernel: usb 1-2: configuration #1 chosen from 1 choice
Aug 7 15:34:18 linux-mario kernel: hub 1-2:1.0: USB hub found
Aug 7 15:34:18 linux-mario kernel: usb 1-2: New USB device found, idVendor=0451, idProduct=2036
Aug 7 15:34:18 linux-mario kernel: usb 1-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
Aug 7 15:34:18 linux-mario kernel: usb 1-2: Product: General Purpose USB Hub
Aug 7 15:34:18 linux-mario kernel: usb 1-2.1: new full speed USB device using uhci_hcd and address 3
Aug 7 15:34:18 linux-mario kernel: usb 1-2.1: configuration #1 chosen from 1 choice
Aug 7 15:34:18 linux-mario kernel: usb 1-2.1: New USB device found, idVendor=046d, idProduct=c51c
Aug 7 15:34:18 linux-mario kernel: usb 1-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
Aug 7 15:34:18 linux-mario kernel: usb 1-2.1: Product: VoIP USB Dual RF Receiver
Aug 7 15:34:18 linux-mario kernel: usb 1-2.1: Manufacturer: Logitech
Aug 7 15:34:19 linux-mario kernel: usb 1-2.2: new full speed USB device using uhci_hcd and address 4
Aug 7 15:34:19 linux-mario kernel: usb 1-2.2: configuration #1 chosen from 1 choice
Aug 7 15:34:19 linux-mario kernel: usb 1-2.2: New USB device found, idVendor=046d, idProduct=0a06
Aug 7 15:34:19 linux-mario kernel: usb 1-2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
Aug 7 15:34:19 linux-mario kernel: usb 1-2.2: Product: EasyCall Speakerphone
Aug 7 15:34:19 linux-mario kernel: usb 1-2.2: Manufacturer: Logitech
Aug 7 15:34:19 linux-mario kernel: usbcore: registered new interface driver hiddev
Aug 7 15:34:19 linux-mario kernel: input: Logitech VoIP USB Dual RF Receiver as /devices/pci0000:00/0000:00:10.0/usb1/1-2/1-2.1/1-2.1:1.0/input/input6
Aug 7 15:34:19 linux-mario kernel: input,hidraw0: USB HID v1.11 Keyboard [Logitech VoIP USB Dual RF Receiver] on usb-0000:00:10.0-2.1
Aug 7 15:34:19 linux-mario kernel: input: Logitech VoIP USB Dual RF Receiver as /devices/pci0000:00/0000:00:10.0/usb1/1-2/1-2.1/1-2.1:1.1/input/input7
Aug 7 15:34:19 linux-mario kernel: input,hiddev96,hidraw1: USB HID v1.11 Mouse [Logitech VoIP USB Dual RF Receiver] on usb-0000:00:10.0-2.1
Aug 7 15:34:19 linux-mario kernel: usbcore: registered new interface driver usbhid
Aug 7 15:34:19 linux-mario kernel: drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
Aug 7 15:34:19 linux-mario kernel: usbcore: registered new interface driver snd-usb-audio
Aug 7 15:35:13 linux-mario kernel: usbcore: deregistering interface driver snd-usb-audio
Aug 7 22:45:37 linux-mario kernel: usbcore: deregistering interface driver snd-usb-audio
Aug 7 23:03:22 linux-mario kernel: hub 2-0:1.0: unable to enumerate USB device on port 2
Aug 7 23:03:22 linux-mario kernel: usb 1-2: new full speed USB device using uhci_hcd and address 2
Aug 7 23:03:22 linux-mario kernel: usb 1-2: configuration #1 chosen from 1 choice
Aug 7 23:03:22 linux-mario kernel: hub 1-2:1.0: USB hub found
Aug 7 23:03:22 linux-mario kernel: usb 1-2: New USB device found, idVendor=0451, idProduct=2036
Aug 7 23:03:22 linux-mario kernel: usb 1-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
Aug 7 23:03:22 linux-mario kernel: usb 1-2: Product: General Purpose USB Hub
Aug 7 23:03:23 linux-mario kernel: usb 1-2.1: new full speed USB device using uhci_hcd and address 3
Aug 7 23:03:23 linux-mario kernel: usb 1-2.1: configuration #1 chosen from 1 choice
Aug 7 23:03:23 linux-mario kernel: usb 1-2.1: New USB device found, idVendor=046d, idProduct=c51c
Aug 7 23:03:23 linux-mario kernel: usb 1-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
Aug 7 23:03:23 linux-mario kernel: usb 1-2.1: Product: VoIP USB Dual RF Receiver
Aug 7 23:03:25 linux-mario kernel: usb 1-2.1: Manufacturer: Logitech
Aug 7 23:03:25 linux-mario kernel: usb 1-2.2: new full speed USB device using uhci_hcd and address 4
Aug 7 23:03:25 linux-mario kernel: usb 1-2.2: configuration #1 chosen from 1 choice
Aug 7 23:03:25 linux-mario kernel: usb 1-2.2: New USB device found, idVendor=046d, idProduct=0a06
Aug 7 23:03:25 linux-mario kernel: usb 1-2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
Aug 7 23:03:25 linux-mario kernel: usb 1-2.2: Product: EasyCall Speakerphone
Aug 7 23:03:25 linux-mario kernel: usb 1-2.2: Manufacturer: Logitech
Aug 7 23:03:25 linux-mario kernel: usbcore: registered new interface driver hiddev
Aug 7 23:03:25 linux-mario kernel: input: Logitech VoIP USB Dual RF Receiver as /devices/pci0000:00/0000:00:10.0/usb1/1-2/1-2.1/1-2.1:1.0/input/input6
Aug 7 23:03:25 linux-mario kernel: input,hidraw0: USB HID v1.11 Keyboard [Logitech VoIP USB Dual RF Receiver] on usb-0000:00:10.0-2.1
Aug 7 23:03:25 linux-mario kernel: input: Logitech VoIP USB Dual RF Receiver as /devices/pci0000:00/0000:00:10.0/usb1/1-2/1-2.1/1-2.1:1.1/input/input7
Aug 7 23:03:25 linux-mario kernel: input,hiddev96,hidraw1: USB HID v1.11 Mouse [Logitech VoIP USB Dual RF Receiver] on usb-0000:00:10.0-2.1
Aug 7 23:03:25 linux-mario kernel: usbcore: registered new interface driver usbhid
Aug 7 23:03:25 linux-mario kernel: drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
Aug 7 23:03:25 linux-mario kernel: usbcore: registered new interface driver snd-usb-audio

[husky]

danke für deine Hilfe runlevel 3 hat funktioniert nur leider konnte ich einen teil der reports nicht lesen weil die auflösung des TFTs per default zu groß war.Gab es da nicht auch ein befehl sodas man durch den report blättern kann ?:confused:

[Rain_maker]

Jo, mehrere, hier bietet sich das an:

http://bin-bash.de/komfort.php

"Ausgabeumleitung" (Datei kann dann hier gepostet werden)

//Edit:

Zum Ansehen:

http://bin-bash.de/kommando.php

"Pager" (less oder more)

[husky]

Danke Rain maker, fällt dir etwas in meinen o.g. reports auf, was auf die Ursache meines probs schliessen lässt ?

[Rain_maker]

Poste die vollständigen Ausgaben, dann macht das "sich Ansehen" auch mehr Sinn.

Was man aber noch machen kann.

Abstöpseln, wieder anstöpseln und dann nochmal die Befehle aufrufen und die dann neu hinzugekommenen Einträge posten.

[husky]

das ist die ganze Ausgabe der Befehle : dmesg | grep -i usb und sudo tail -5000 /var/log/messages | grep -i usb


linux-mario:~ # dmesg | grep -i usb
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
USB Universal Host Controller Interface driver v3.0
uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: UHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.25.5-1.1-pae uhci_hcd
usb usb1: SerialNumber: 0000:00:10.0
ehci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:10.3: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.25.5-1.1-pae ehci_hcd
usb usb2: SerialNumber: 0000:00:10.3
uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.25.5-1.1-pae uhci_hcd
usb usb3: SerialNumber: 0000:00:10.1
uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.25.5-1.1-pae uhci_hcd
usb usb4: SerialNumber: 0000:00:10.2
hub 2-0:1.0: unable to enumerate USB device on port 2
usb 1-2: new full speed USB device using uhci_hcd and address 2
usb 1-2: configuration #1 chosen from 1 choice
hub 1-2:1.0: USB hub found
usb 1-2: New USB device found, idVendor=0451, idProduct=2036
usb 1-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 1-2: Product: General Purpose USB Hub
usb 1-2.1: new full speed USB device using uhci_hcd and address 3
usb 1-2.1: configuration #1 chosen from 1 choice
usb 1-2.1: New USB device found, idVendor=046d, idProduct=c51c
usb 1-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-2.1: Product: VoIP USB Dual RF Receiver
usb 1-2.1: Manufacturer: Logitech
usb 1-2.2: new full speed USB device using uhci_hcd and address 4
usb 1-2.2: configuration #1 chosen from 1 choice
usb 1-2.2: New USB device found, idVendor=046d, idProduct=0a06
usb 1-2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-2.2: Product: EasyCall Speakerphone
usb 1-2.2: Manufacturer: Logitech
usbcore: registered new interface driver hiddev
input: Logitech VoIP USB Dual RF Receiver as /devices/pci0000:00/0000:00:10.0/us b1/1-2/1-2.1/1-2.1:1.0/input/input6
input,hidraw0: USB HID v1.11 Keyboard [Logitech VoIP USB Dual RF Receiver] on us b-0000:00:10.0-2.1
input: Logitech VoIP USB Dual RF Receiver as /devices/pci0000:00/0000:00:10.0/us b1/1-2/1-2.1/1-2.1:1.1/input/input7
input,hiddev96,hidraw1: USB HID v1.11 Mouse [Logitech VoIP USB Dual RF Receiver] on usb-0000:00:10.0-2.1
usbcore: registered new interface driver usbhid
drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
usbcore: registered new interface driver snd-usb-audio
linux-mario:~ #



linux-mario:~ # sudo tail -5000 /var/log/messages | grep -i usb
Aug 7 02:12:37 linux-mario kernel: usbcore: deregistering interface driver snd-usb-audio
Aug 7 15:34:18 linux-mario kernel: hub 2-0:1.0: unable to enumerate USB device on port 2
Aug 7 15:34:18 linux-mario kernel: usb 1-2: new full speed USB device using uhci_hcd and address 2
Aug 7 15:34:18 linux-mario kernel: usb 1-2: configuration #1 chosen from 1 choice
Aug 7 15:34:18 linux-mario kernel: hub 1-2:1.0: USB hub found
Aug 7 15:34:18 linux-mario kernel: usb 1-2: New USB device found, idVendor=0451, idProduct=2036
Aug 7 15:34:18 linux-mario kernel: usb 1-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
Aug 7 15:34:18 linux-mario kernel: usb 1-2: Product: General Purpose USB Hub
Aug 7 15:34:18 linux-mario kernel: usb 1-2.1: new full speed USB device using uhci_hcd and address 3
Aug 7 15:34:18 linux-mario kernel: usb 1-2.1: configuration #1 chosen from 1 choice
Aug 7 15:34:18 linux-mario kernel: usb 1-2.1: New USB device found, idVendor=046d, idProduct=c51c
Aug 7 15:34:18 linux-mario kernel: usb 1-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
Aug 7 15:34:18 linux-mario kernel: usb 1-2.1: Product: VoIP USB Dual RF Receiver
Aug 7 15:34:18 linux-mario kernel: usb 1-2.1: Manufacturer: Logitech
Aug 7 15:34:19 linux-mario kernel: usb 1-2.2: new full speed USB device using uhci_hcd and address 4
Aug 7 15:34:19 linux-mario kernel: usb 1-2.2: configuration #1 chosen from 1 choice
Aug 7 15:34:19 linux-mario kernel: usb 1-2.2: New USB device found, idVendor=046d, idProduct=0a06
Aug 7 15:34:19 linux-mario kernel: usb 1-2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
Aug 7 15:34:19 linux-mario kernel: usb 1-2.2: Product: EasyCall Speakerphone
Aug 7 15:34:19 linux-mario kernel: usb 1-2.2: Manufacturer: Logitech
Aug 7 15:34:19 linux-mario kernel: usbcore: registered new interface driver hiddev
Aug 7 15:34:19 linux-mario kernel: input: Logitech VoIP USB Dual RF Receiver as /devices/pci0000:00/0000:00:10.0/usb1/1-2/1-2.1/1-2.1:1.0/input/input6
Aug 7 15:34:19 linux-mario kernel: input,hidraw0: USB HID v1.11 Keyboard [Logitech VoIP USB Dual RF Receiver] on usb-0000:00:10.0-2.1
Aug 7 15:34:19 linux-mario kernel: input: Logitech VoIP USB Dual RF Receiver as /devices/pci0000:00/0000:00:10.0/usb1/1-2/1-2.1/1-2.1:1.1/input/input7
Aug 7 15:34:19 linux-mario kernel: input,hiddev96,hidraw1: USB HID v1.11 Mouse [Logitech VoIP USB Dual RF Receiver] on usb-0000:00:10.0-2.1
Aug 7 15:34:19 linux-mario kernel: usbcore: registered new interface driver usbhid
Aug 7 15:34:19 linux-mario kernel: drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
Aug 7 15:34:19 linux-mario kernel: usbcore: registered new interface driver snd-usb-audio
Aug 7 15:35:13 linux-mario kernel: usbcore: deregistering interface driver snd-usb-audio
Aug 7 22:45:37 linux-mario kernel: usbcore: deregistering interface driver snd-usb-audio
Aug 7 23:03:22 linux-mario kernel: hub 2-0:1.0: unable to enumerate USB device on port 2
Aug 7 23:03:22 linux-mario kernel: usb 1-2: new full speed USB device using uhci_hcd and address 2
Aug 7 23:03:22 linux-mario kernel: usb 1-2: configuration #1 chosen from 1 choice
Aug 7 23:03:22 linux-mario kernel: hub 1-2:1.0: USB hub found
Aug 7 23:03:22 linux-mario kernel: usb 1-2: New USB device found, idVendor=0451, idProduct=2036
Aug 7 23:03:22 linux-mario kernel: usb 1-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
Aug 7 23:03:22 linux-mario kernel: usb 1-2: Product: General Purpose USB Hub
Aug 7 23:03:23 linux-mario kernel: usb 1-2.1: new full speed USB device using uhci_hcd and address 3
Aug 7 23:03:23 linux-mario kernel: usb 1-2.1: configuration #1 chosen from 1 choice
Aug 7 23:03:23 linux-mario kernel: usb 1-2.1: New USB device found, idVendor=046d, idProduct=c51c
Aug 7 23:03:23 linux-mario kernel: usb 1-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
Aug 7 23:03:23 linux-mario kernel: usb 1-2.1: Product: VoIP USB Dual RF Receiver
Aug 7 23:03:25 linux-mario kernel: usb 1-2.1: Manufacturer: Logitech
Aug 7 23:03:25 linux-mario kernel: usb 1-2.2: new full speed USB device using uhci_hcd and address 4
Aug 7 23:03:25 linux-mario kernel: usb 1-2.2: configuration #1 chosen from 1 choice
Aug 7 23:03:25 linux-mario kernel: usb 1-2.2: New USB device found, idVendor=046d, idProduct=0a06
Aug 7 23:03:25 linux-mario kernel: usb 1-2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
Aug 7 23:03:25 linux-mario kernel: usb 1-2.2: Product: EasyCall Speakerphone
Aug 7 23:03:25 linux-mario kernel: usb 1-2.2: Manufacturer: Logitech
Aug 7 23:03:25 linux-mario kernel: usbcore: registered new interface driver hiddev
Aug 7 23:03:25 linux-mario kernel: input: Logitech VoIP USB Dual RF Receiver as /devices/pci0000:00/0000:00:10.0/usb1/1-2/1-2.1/1-2.1:1.0/input/input6
Aug 7 23:03:25 linux-mario kernel: input,hidraw0: USB HID v1.11 Keyboard [Logitech VoIP USB Dual RF Receiver] on usb-0000:00:10.0-2.1
Aug 7 23:03:25 linux-mario kernel: input: Logitech VoIP USB Dual RF Receiver as /devices/pci0000:00/0000:00:10.0/usb1/1-2/1-2.1/1-2.1:1.1/input/input7
Aug 7 23:03:25 linux-mario kernel: input,hiddev96,hidraw1: USB HID v1.11 Mouse [Logitech VoIP USB Dual RF Receiver] on usb-0000:00:10.0-2.1
Aug 7 23:03:25 linux-mario kernel: usbcore: registered new interface driver usbhid
Aug 7 23:03:25 linux-mario kernel: drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
Aug 7 23:03:25 linux-mario kernel: usbcore: registered new interface driver snd-usb-audio
linux-mario:~ #

[husky]

jetzt die Ausgabe nach dem Ab- u. Anstöpseln:

linux-mario:~ # dmesg | grep -i usb
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
USB Universal Host Controller Interface driver v3.0
uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: UHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.25.5-1.1-pae uhci_hcd
usb usb1: SerialNumber: 0000:00:10.0
ehci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:10.3: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.25.5-1.1-pae ehci_hcd
usb usb2: SerialNumber: 0000:00:10.3
uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.25.5-1.1-pae uhci_hcd
usb usb3: SerialNumber: 0000:00:10.1
uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.25.5-1.1-pae uhci_hcd
usb usb4: SerialNumber: 0000:00:10.2
hub 2-0:1.0: unable to enumerate USB device on port 2
usb 1-2: new full speed USB device using uhci_hcd and address 2
usb 1-2: configuration #1 chosen from 1 choice
hub 1-2:1.0: USB hub found
usb 1-2: New USB device found, idVendor=0451, idProduct=2036
usb 1-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 1-2: Product: General Purpose USB Hub
usb 1-2.1: new full speed USB device using uhci_hcd and address 3
usb 1-2.1: configuration #1 chosen from 1 choice
usb 1-2.1: New USB device found, idVendor=046d, idProduct=c51c
usb 1-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-2.1: Product: VoIP USB Dual RF Receiver
usb 1-2.1: Manufacturer: Logitech
usb 1-2.2: new full speed USB device using uhci_hcd and address 4
usb 1-2.2: configuration #1 chosen from 1 choice
usb 1-2.2: New USB device found, idVendor=046d, idProduct=0a06
usb 1-2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-2.2: Product: EasyCall Speakerphone
usb 1-2.2: Manufacturer: Logitech
usbcore: registered new interface driver hiddev
input: Logitech VoIP USB Dual RF Receiver as /devices/pci0000:00/0000:00:10.0/usb1/1-2/1-2.1/1-2.1:1.0/input/input6
input,hidraw0: USB HID v1.11 Keyboard [Logitech VoIP USB Dual RF Receiver] on usb-0000:00:10.0-2.1
input: Logitech VoIP USB Dual RF Receiver as /devices/pci0000:00/0000:00:10.0/usb1/1-2/1-2.1/1-2.1:1.1/input/input7
input,hiddev96,hidraw1: USB HID v1.11 Mouse [Logitech VoIP USB Dual RF Receiver] on usb-0000:00:10.0-2.1
usbcore: registered new interface driver usbhid
drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
usbcore: registered new interface driver snd-usb-audio
usb 1-2: USB disconnect, address 2
usb 1-2.1: USB disconnect, address 3
usb 1-2.2: USB disconnect, address 4
usb 1-2: new full speed USB device using uhci_hcd and address 5
usb 1-2: configuration #1 chosen from 1 choice
hub 1-2:1.0: USB hub found
usb 1-2: New USB device found, idVendor=0451, idProduct=2036
usb 1-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 1-2: Product: General Purpose USB Hub
usb 1-2.1: new full speed USB device using uhci_hcd and address 6
usb 1-2.1: configuration #1 chosen from 1 choice
input: Logitech VoIP USB Dual RF Receiver as /devices/pci0000:00/0000:00:10.0/usb1/1-2/1-2.1/1-2.1:1.0/input/input8
input,hidraw0: USB HID v1.11 Keyboard [Logitech VoIP USB Dual RF Receiver] on usb-0000:00:10.0-2.1
input: Logitech VoIP USB Dual RF Receiver as /devices/pci0000:00/0000:00:10.0/usb1/1-2/1-2.1/1-2.1:1.1/input/input9
input,hiddev96,hidraw1: USB HID v1.11 Mouse [Logitech VoIP USB Dual RF Receiver] on usb-0000:00:10.0-2.1
usb 1-2.1: New USB device found, idVendor=046d, idProduct=c51c
usb 1-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-2.1: Product: VoIP USB Dual RF Receiver
usb 1-2.1: Manufacturer: Logitech
usb 1-2.2: new full speed USB device using uhci_hcd and address 7
usb 1-2.2: configuration #1 chosen from 1 choice
usb 1-2.2: New USB device found, idVendor=046d, idProduct=0a06
usb 1-2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-2.2: Product: EasyCall Speakerphone
usb 1-2.2: Manufacturer: Logitech
linux-mario:~ #



linux-mario:~ # sudo tail -5000 /var/log/messages | grep -i usb
Aug 7 02:12:37 linux-mario kernel: usbcore: deregistering interface driver snd-usb-audio
Aug 7 15:34:18 linux-mario kernel: hub 2-0:1.0: unable to enumerate USB device on port 2
Aug 7 15:34:18 linux-mario kernel: usb 1-2: new full speed USB device using uhci_hcd and address 2
Aug 7 15:34:18 linux-mario kernel: usb 1-2: configuration #1 chosen from 1 choice
Aug 7 15:34:18 linux-mario kernel: hub 1-2:1.0: USB hub found
Aug 7 15:34:18 linux-mario kernel: usb 1-2: New USB device found, idVendor=0451, idProduct=2036
Aug 7 15:34:18 linux-mario kernel: usb 1-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
Aug 7 15:34:18 linux-mario kernel: usb 1-2: Product: General Purpose USB Hub
Aug 7 15:34:18 linux-mario kernel: usb 1-2.1: new full speed USB device using uhci_hcd and address 3
Aug 7 15:34:18 linux-mario kernel: usb 1-2.1: configuration #1 chosen from 1 choice
Aug 7 15:34:18 linux-mario kernel: usb 1-2.1: New USB device found, idVendor=046d, idProduct=c51c
Aug 7 15:34:18 linux-mario kernel: usb 1-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
Aug 7 15:34:18 linux-mario kernel: usb 1-2.1: Product: VoIP USB Dual RF Receiver
Aug 7 15:34:18 linux-mario kernel: usb 1-2.1: Manufacturer: Logitech
Aug 7 15:34:19 linux-mario kernel: usb 1-2.2: new full speed USB device using uhci_hcd and address 4
Aug 7 15:34:19 linux-mario kernel: usb 1-2.2: configuration #1 chosen from 1 choice
Aug 7 15:34:19 linux-mario kernel: usb 1-2.2: New USB device found, idVendor=046d, idProduct=0a06
Aug 7 15:34:19 linux-mario kernel: usb 1-2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
Aug 7 15:34:19 linux-mario kernel: usb 1-2.2: Product: EasyCall Speakerphone
Aug 7 15:34:19 linux-mario kernel: usb 1-2.2: Manufacturer: Logitech
Aug 7 15:34:19 linux-mario kernel: usbcore: registered new interface driver hiddev
Aug 7 15:34:19 linux-mario kernel: input: Logitech VoIP USB Dual RF Receiver as /devices/pci0000:00/0000:00:10.0/usb1/1-2/1-2.1/1-2.1:1.0/input/input6
Aug 7 15:34:19 linux-mario kernel: input,hidraw0: USB HID v1.11 Keyboard [Logitech VoIP USB Dual RF Receiver] on usb-0000:00:10.0-2.1
Aug 7 15:34:19 linux-mario kernel: input: Logitech VoIP USB Dual RF Receiver as /devices/pci0000:00/0000:00:10.0/usb1/1-2/1-2.1/1-2.1:1.1/input/input7
Aug 7 15:34:19 linux-mario kernel: input,hiddev96,hidraw1: USB HID v1.11 Mouse [Logitech VoIP USB Dual RF Receiver] on usb-0000:00:10.0-2.1
Aug 7 15:34:19 linux-mario kernel: usbcore: registered new interface driver usbhid
Aug 7 15:34:19 linux-mario kernel: drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
Aug 7 15:34:19 linux-mario kernel: usbcore: registered new interface driver snd-usb-audio
Aug 7 15:35:13 linux-mario kernel: usbcore: deregistering interface driver snd-usb-audio
Aug 7 22:45:37 linux-mario kernel: usbcore: deregistering interface driver snd-usb-audio
Aug 7 23:03:22 linux-mario kernel: hub 2-0:1.0: unable to enumerate USB device on port 2
Aug 7 23:03:22 linux-mario kernel: usb 1-2: new full speed USB device using uhci_hcd and address 2
Aug 7 23:03:22 linux-mario kernel: usb 1-2: configuration #1 chosen from 1 choice
Aug 7 23:03:22 linux-mario kernel: hub 1-2:1.0: USB hub found
Aug 7 23:03:22 linux-mario kernel: usb 1-2: New USB device found, idVendor=0451, idProduct=2036
Aug 7 23:03:22 linux-mario kernel: usb 1-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
Aug 7 23:03:22 linux-mario kernel: usb 1-2: Product: General Purpose USB Hub
Aug 7 23:03:23 linux-mario kernel: usb 1-2.1: new full speed USB device using uhci_hcd and address 3
Aug 7 23:03:23 linux-mario kernel: usb 1-2.1: configuration #1 chosen from 1 choice
Aug 7 23:03:23 linux-mario kernel: usb 1-2.1: New USB device found, idVendor=046d, idProduct=c51c
Aug 7 23:03:23 linux-mario kernel: usb 1-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
Aug 7 23:03:23 linux-mario kernel: usb 1-2.1: Product: VoIP USB Dual RF Receiver
Aug 7 23:03:25 linux-mario kernel: usb 1-2.1: Manufacturer: Logitech
Aug 7 23:03:25 linux-mario kernel: usb 1-2.2: new full speed USB device using uhci_hcd and address 4
Aug 7 23:03:25 linux-mario kernel: usb 1-2.2: configuration #1 chosen from 1 choice
Aug 7 23:03:25 linux-mario kernel: usb 1-2.2: New USB device found, idVendor=046d, idProduct=0a06
Aug 7 23:03:25 linux-mario kernel: usb 1-2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
Aug 7 23:03:25 linux-mario kernel: usb 1-2.2: Product: EasyCall Speakerphone
Aug 7 23:03:25 linux-mario kernel: usb 1-2.2: Manufacturer: Logitech
Aug 7 23:03:25 linux-mario kernel: usbcore: registered new interface driver hiddev
Aug 7 23:03:25 linux-mario kernel: input: Logitech VoIP USB Dual RF Receiver as /devices/pci0000:00/0000:00:10.0/usb1/1-2/1-2.1/1-2.1:1.0/input/input6
Aug 7 23:03:25 linux-mario kernel: input,hidraw0: USB HID v1.11 Keyboard [Logitech VoIP USB Dual RF Receiver] on usb-0000:00:10.0-2.1
Aug 7 23:03:25 linux-mario kernel: input: Logitech VoIP USB Dual RF Receiver as /devices/pci0000:00/0000:00:10.0/usb1/1-2/1-2.1/1-2.1:1.1/input/input7
Aug 7 23:03:25 linux-mario kernel: input,hiddev96,hidraw1: USB HID v1.11 Mouse [Logitech VoIP USB Dual RF Receiver] on usb-0000:00:10.0-2.1
Aug 7 23:03:25 linux-mario kernel: usbcore: registered new interface driver usbhid
Aug 7 23:03:25 linux-mario kernel: drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
Aug 7 23:03:25 linux-mario kernel: usbcore: registered new interface driver snd-usb-audio
Aug 7 23:54:31 linux-mario kernel: usb 1-2: USB disconnect, address 2
Aug 7 23:54:31 linux-mario kernel: usb 1-2.1: USB disconnect, address 3
Aug 7 23:54:31 linux-mario kernel: usb 1-2.2: USB disconnect, address 4
Aug 7 23:54:52 linux-mario kernel: usb 1-2: new full speed USB device using uhci_hcd and address 5
Aug 7 23:54:52 linux-mario kernel: usb 1-2: configuration #1 chosen from 1 choice
Aug 7 23:54:52 linux-mario kernel: hub 1-2:1.0: USB hub found
Aug 7 23:54:52 linux-mario kernel: usb 1-2: New USB device found, idVendor=0451, idProduct=2036
Aug 7 23:54:52 linux-mario kernel: usb 1-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
Aug 7 23:54:52 linux-mario kernel: usb 1-2: Product: General Purpose USB Hub
Aug 7 23:54:52 linux-mario kernel: usb 1-2.1: new full speed USB device using uhci_hcd and address 6
Aug 7 23:54:53 linux-mario kernel: usb 1-2.1: configuration #1 chosen from 1 choice
Aug 7 23:54:53 linux-mario kernel: input: Logitech VoIP USB Dual RF Receiver as /devices/pci0000:00/0000:00:10.0/usb1/1-2/1-2.1/1-2.1:1.0/input/input8
Aug 7 23:54:53 linux-mario kernel: input,hidraw0: USB HID v1.11 Keyboard [Logitech VoIP USB Dual RF Receiver] on usb-0000:00:10.0-2.1
Aug 7 23:54:53 linux-mario kernel: input: Logitech VoIP USB Dual RF Receiver as /devices/pci0000:00/0000:00:10.0/usb1/1-2/1-2.1/1-2.1:1.1/input/input9
Aug 7 23:54:53 linux-mario kernel: input,hiddev96,hidraw1: USB HID v1.11 Mouse [Logitech VoIP USB Dual RF Receiver] on usb-0000:00:10.0-2.1
Aug 7 23:54:53 linux-mario kernel: usb 1-2.1: New USB device found, idVendor=046d, idProduct=c51c
Aug 7 23:54:53 linux-mario kernel: usb 1-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
Aug 7 23:54:53 linux-mario kernel: usb 1-2.1: Product: VoIP USB Dual RF Receiver
Aug 7 23:54:53 linux-mario kernel: usb 1-2.1: Manufacturer: Logitech
Aug 7 23:54:53 linux-mario kernel: usb 1-2.2: new full speed USB device using uhci_hcd and address 7
Aug 7 23:54:53 linux-mario kernel: usb 1-2.2: configuration #1 chosen from 1 choice
Aug 7 23:54:53 linux-mario kernel: usb 1-2.2: New USB device found, idVendor=046d, idProduct=0a06
Aug 7 23:54:53 linux-mario kernel: usb 1-2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
Aug 7 23:54:53 linux-mario kernel: usb 1-2.2: Product: EasyCall Speakerphone
Aug 7 23:54:53 linux-mario kernel: usb 1-2.2: Manufacturer: Logitech
linux-mario:~ #

[husky]

Merkwürdig ist auch das das System jetzt seit einer Std. ohne Probleme läuft, scheinbar weil ich die usb Maus zwar angeschlossen habe aber nicht benutze.

[Krischi]

Das ganze in Code-Tags ([ Code]...[/ Code]) zu packen macht den Thread wesentlich übersichtlicher. Nicht nur aber auch gerade bei solch langen Ausgaben.
Es wäre schön, wenn Du das noch nachholen könntest.