PDA

Archiv verlassen und diese Seite im Standarddesign anzeigen : Lautsprecher an Laptop



Seiten : [1] 2

PC-amateur
01.07.08, 18:56
Hallo Leute,

Ich habe mir ein paar Lautsprecher (V20 notebook speakers) zugelegt, die allerdings nicht von meinem EeePC 4g erkannt werden. Ich habe die sache auch schon einmal gegoogelt, aber ohne erfolg. Nun ist meine frage ob es dafür einen Treiber gibt, mit dem ich die Lautsprecher mit meinem Laptop kompatibel mache.
Vielen dank schon mal

Grothesk
01.07.08, 19:00
Haben die Dinger eine eigene Soundkarte? Ansonsten muss man die Dinger doch nur einstecken.

PC-amateur
01.07.08, 19:03
nein......ich habe vergessen zu sagen, dass man sie per USB anschließt....und auch nur über diese Schnittstelle mit strom versorgt werden

Aqualung
01.07.08, 19:23
Steck sie an und poste


dmesg

Grothesk
01.07.08, 19:26
Und

lsusb

Sidolin
01.07.08, 19:29
Dann haben die eine eigene Soundkarte. Poste auch mal neben dmesg den output von lsusb.

PC-amateur
01.07.08, 19:35
vieleicht eine blöde frage..aber ich habe keione ahnung was du mit posten meinst....und was soll ich mit den abkürzungen machen?.....

stefan.becker
01.07.08, 19:39
Befehl eingeben als root, Ausgaben hier reinschreiben.

PC-amateur
01.07.08, 20:24
und wie gebe ich das als root ein.....

stefan.becker
01.07.08, 20:25
Oh je, du bist wirklich ein Anfänger :)

Kein Thema: Konsole öffnen, "su" eingeben, dann nach Aufforderung das root Kennwort.

Und dann obige Befehle eintippen.

Aqualung
01.07.08, 20:29
ALT-F2

konsole eingeben, ENTER drücken

Dann hast Du einen sog. PROMPT "user@rechner:~>"

Jetzt gibst Du ein (nach dem anstöpseln):



dmesg
lsusb

PC-amateur
01.07.08, 20:37
ihr seid gut.....ich hab es gefunden...aber wie bekomme ich denn jetzt diesen ganzen text hier rein....

Aqualung
01.07.08, 20:42
Das nennt sich cut'n'paste:

Du markierst den gewünschten Text mit gehaltener linker Maustaste, so dass er dunkel hinterlegt wird.

Dann wieder in Deinen Firefox, Dein Beitrag, dann mittlere Maustaste.
Dann in der Zeile oberhalb '#' (2. von rechts) klicken.

PC-amateur
01.07.08, 20:49
Ok....hier sind die Texte:

/home/user> dmesg
97] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled
.
[ 7.652383] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *
0, disabled.
[ 7.652968] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *
0, disabled.
[ 7.653554] ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 6 7 10 11 12 14 15)
[ 7.653896] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 7.653916] pnp: PnP ACPI init
[ 7.661993] pnp: PnP ACPI: found 13 devices
[ 7.662253] SCSI subsystem initialized
[ 7.662303] libata version 2.20 loaded.
[ 7.662447] PCI: Using ACPI for IRQ routing
[ 7.662456] PCI: If a device doesn't work, try "pci=routeirq". If it helps,
post a report
[ 7.662651] pnp: 00:01: iomem range 0xfed13000-0xfed19fff has been reserved
[ 7.662673] pnp: 00:08: iomem range 0xfed1c000-0xfed1ffff has been reserved
[ 7.662682] pnp: 00:08: iomem range 0xfed20000-0xfed8ffff has been reserved
[ 7.662691] pnp: 00:08: iomem range 0xfff00000-0xffffffff could not be reserv
ed
[ 7.662704] pnp: 00:09: iomem range 0xfec00000-0xfec00fff has been reserved
[ 7.662712] pnp: 00:09: iomem range 0xfee00000-0xfee00fff could not be reserv
ed
[ 7.662725] pnp: 00:0a: iomem range 0xe0000000-0xefffffff has been reserved
[ 7.662738] pnp: 00:0b: iomem range 0xe0000000-0xefffffff has been reserved
[ 7.662750] pnp: 00:0c: iomem range 0x0-0x9ffff could not be reserved
[ 7.662758] pnp: 00:0c: iomem range 0xc0000-0xcffff could not be reserved
[ 7.662766] pnp: 00:0c: iomem range 0xe0000-0xfffff could not be reserved
[ 7.662774] pnp: 00:0c: iomem range 0x100000-0x1f7fffff could not be reserved
[ 7.666240] Time: tsc clocksource has been installed.
[ 7.693307] PCI: Ignore bogus resource 6 [0:0] of 0000:00:02.0
[ 7.693322] PCI: Bridge: 0000:00:1c.0
[ 7.693326] IO window: disabled.
[ 7.693334] MEM window: disabled.
[ 7.693340] PREFETCH window: disabled.
[ 7.693349] PCI: Bridge: 0000:00:1c.1
[ 7.693352] IO window: disabled.
[ 7.693362] MEM window: fbf00000-fbffffff
[ 7.693368] PREFETCH window: disabled.
[ 7.693377] PCI: Bridge: 0000:00:1c.2
[ 7.693380] IO window: disabled.
[ 7.693389] MEM window: f8000000-fbefffff
[ 7.693397] PREFETCH window: f0000000-f6ffffff
[ 7.693406] PCI: Bridge: 0000:00:1e.0
[ 7.693409] IO window: disabled.
[ 7.693417] MEM window: disabled.
[ 7.693423] PREFETCH window: disabled.
[ 7.694239] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 5
[ 7.694246] PCI: setting IRQ 5 as level-triggered
[ 7.694254] ACPI: PCI Interrupt 0000:00:1c.0[A] -> Link [LNKA] -> GSI 5 (leve
l, low) -> IRQ 5
[ 7.694269] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 7.694993] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
[ 7.695000] PCI: setting IRQ 11 as level-triggered
[ 7.695007] ACPI: PCI Interrupt 0000:00:1c.1[B] -> Link [LNKB] -> GSI 11 (lev
el, low) -> IRQ 11
[ 7.695020] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[ 7.695740] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10
[ 7.695746] PCI: setting IRQ 10 as level-triggered
[ 7.695753] ACPI: PCI Interrupt 0000:00:1c.2[C] -> Link [LNKC] -> GSI 10 (lev
el, low) -> IRQ 10
[ 7.695766] PCI: Setting latency timer of device 0000:00:1c.2 to 64
[ 7.695783] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[ 7.695827] NET: Registered protocol family 2
[ 7.786283] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 7.786359] TCP established hash table entries: 16384 (order: 5, 131072 bytes
)
[ 7.786607] TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
[ 7.786748] TCP: Hash tables configured (established 16384 bind 16384)
[ 7.786755] TCP reno registered
[ 7.816477] checking if image is initramfs... it is
[ 7.867994] Freeing initrd memory: 247k freed
[ 7.868761] Registering unionfs 2.0
[ 7.868834] io scheduler noop registered
[ 7.868840] io scheduler deadline registered (default)
[ 7.869206] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 7.869263] assign_interrupt_mode Found MSI capability
[ 7.869270] Allocate Port Service[0000:00:1c.0:pcie00]
[ 7.869337] Allocate Port Service[0000:00:1c.0:pcie02]
[ 7.869459] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[ 7.869514] assign_interrupt_mode Found MSI capability
[ 7.869520] Allocate Port Service[0000:00:1c.1:pcie00]
[ 7.869577] Allocate Port Service[0000:00:1c.1:pcie02]
[ 7.869687] PCI: Setting latency timer of device 0000:00:1c.2 to 64
[ 7.869742] assign_interrupt_mode Found MSI capability
[ 7.869749] Allocate Port Service[0000:00:1c.2:pcie00]
[ 7.869809] Allocate Port Service[0000:00:1c.2:pcie02]
[ 7.870104] vesafb: framebuffer at 0xd0000000, mapped to 0xe0080000, using 12
00k, total 7872k
[ 7.870113] vesafb: mode is 640x480x16, linelength=1280, pages=12
[ 7.870120] vesafb: protected mode interface info at 00ff:44f0
[ 7.870125] vesafb: scrolling: redraw
[ 7.870133] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
[ 7.884351] Console: switching to colour frame buffer device 80x30
[ 7.898267] fb0: VESA VGA frame buffer device
[ 8.016673] Linux agpgart interface v0.102 (c) Dave Jones
[ 8.016752] agpgart: Detected an Intel 915GM Chipset.
[ 8.017059] agpgart: Detected 7932K stolen memory.
[ 8.045158] agpgart: AGP aperture is 256M @ 0xd0000000
[ 8.045221] [drm] Initialized drm 1.1.0 20060810
[ 8.045266] ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LNKA] -> GSI 5 (leve
l, low) -> IRQ 5
[ 8.045393] [drm] Initialized i915 1.6.0 20060119 on minor 0
[ 8.046389] RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 block
size
[ 8.046840] loop: loaded (max 8 devices)
[ 8.047150] tun: Universal TUN/TAP device driver, 1.6
[ 8.047157] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 8.047345] ata_piix 0000:00:1f.2: version 2.10ac1
[ 8.047357] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
[ 8.048236] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 7
[ 8.048243] PCI: setting IRQ 7 as level-triggered
[ 8.048250] ACPI: PCI Interrupt 0000:00:1f.2[B] -> Link [LNKD] -> GSI 7 (leve
l, low) -> IRQ 7
[ 8.048283] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[ 8.048376] ata1: SATA max UDMA/133 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x000
1ffa0 irq 14
[ 8.048421] ata2: PATA max UDMA/100 cmd 0x00010170 ctl 0x00010376 bmdma 0x000
1ffa8 irq 15
[ 8.048449] scsi0 : ata_piix
[ 8.217165] ATA: abnormal status 0x7F on port 0x000101f7
[ 8.217204] scsi1 : ata_piix
[ 8.396453] ata2.00: ATA-4: SILICONMOTION SM223AC, , max UDMA/66
[ 8.396460] ata2.00: 7815024 sectors, multi 0: LBA
[ 8.416446] ata2.00: configured for UDMA/33
[ 8.416638] scsi 1:0:0:0: Direct-Access ATA SILICONMOTION SM n/a PQ
: 0 ANSI: 5
[ 8.416811] SCSI device sda: 7815024 512-byte hdwr sectors (4001 MB)
[ 8.416833] sda: Write Protect is off
[ 8.416838] sda: Mode Sense: 00 3a 00 00
[ 8.416865] SCSI device sda: write cache: disabled, read cache: enabled, does
n't support DPO or FUA
[ 8.416956] SCSI device sda: 7815024 512-byte hdwr sectors (4001 MB)
[ 8.416972] sda: Write Protect is off
[ 8.416977] sda: Mode Sense: 00 3a 00 00
[ 8.417002] SCSI device sda: write cache: disabled, read cache: enabled, does
n't support DPO or FUA
[ 8.417010] sda: sda1 sda2 sda3 sda4
[ 8.417700] sd 1:0:0:0: Attached scsi disk sda
[ 8.417936] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq
1,12
[ 8.434153] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 8.434163] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 8.434416] mice: PS/2 mouse device common for all mice
[ 8.461165] input: AT Translated Set 2 keyboard as /class/input/input0
[ 8.472489] TCP cubic registered
[ 8.472518] NET: Registered protocol family 1
[ 8.472528] NET: Registered protocol family 17
[ 8.472541] Using IPI Shortcut mode
[ 8.472872] Freeing unused kernel memory: 164k freed
[ 9.053162] Synaptics Touchpad, model: 1, fw: 6.5, id: 0x1c0b1, caps: 0xa0475
1/0xa00000
[ 9.145142] input: SynPS/2 Synaptics TouchPad as /class/input/input1
[ 10.564629] kjournald starting. Commit interval 5 seconds
[ 10.565706] EXT3 FS on sda2, internal journal
[ 10.565713] EXT3-fs: recovery complete.
[ 10.682656] EXT3-fs: mounted filesystem with ordered data mode.
[ 10.935117] Generic RTC Driver v1.07
[ 14.815231] ACPI: PCI Interrupt 0000:00:1b.0[A] -> Link [LNKA] -> GSI 5 (leve
l, low) -> IRQ 5
[ 14.815268] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[ 15.385394] jack present = 0 0
[ 15.561039] ACPI: AC Adapter [AC0] (on-line)
[ 15.949061] ACPI: Battery Slot [BAT0] (battery present)
[ 16.067265] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[ 16.067283] ACPI: Processor [CPU1] (supports 8 throttling states)
[ 16.150180] input: Power Button (FF) as /class/input/input2
[ 16.150240] ACPI: Power Button (FF) [PWRF]
[ 16.150467] input: Lid Switch as /class/input/input3
[ 16.150505] ACPI: Lid Switch [LID]
[ 16.150592] input: Sleep Button (CM) as /class/input/input4
[ 16.150637] ACPI: Sleep Button (CM) [SLPB]
[ 16.150716] input: Power Button (CM) as /class/input/input5
[ 16.150753] ACPI: Power Button (CM) [PWRB]
[ 16.330517] eeepc_hotk: module license 'unspecified' taints kernel.
[ 16.331285] Asus EEEPC HOTKEY
[ 16.331630] [eeepc hotk] Hotkey init flags 0x41.
[ 16.333266] [eeepc hotk] Get control methods supported : 0x101711
[ 16.358109] fuse init (API version 7.8)
[ 16.575356] usbcore: registered new interface driver usbfs
[ 16.575417] usbcore: registered new interface driver hub
[ 16.575465] usbcore: registered new device driver usb
[ 16.580691] usbcore: registered new interface driver usbhid
[ 16.580705] drivers/usb/input/hid-core.c: v2.6:USB HID core driver
[ 16.593032] USB Universal Host Controller Interface driver v3.0
[ 16.594018] ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 3
[ 16.594026] PCI: setting IRQ 3 as level-triggered
[ 16.594035] ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [LNKH] -> GSI 3 (leve
l, low) -> IRQ 3
[ 16.594057] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[ 16.594067] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 16.594673] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus numbe
r 1
[ 16.594719] uhci_hcd 0000:00:1d.0: irq 3, io base 0x0000e400
[ 16.594971] usb usb1: configuration #1 chosen from 1 choice
[ 16.595026] hub 1-0:1.0: USB hub found
[ 16.595041] hub 1-0:1.0: 2 ports detected
[ 16.695403] ACPI: PCI Interrupt 0000:00:1d.1[B] -> Link [LNKD] -> GSI 7 (leve
l, low) -> IRQ 7
[ 16.695430] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[ 16.695439] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 16.695489] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus numbe
r 2
[ 16.695529] uhci_hcd 0000:00:1d.1: irq 7, io base 0x0000e480
[ 16.695723] usb usb2: configuration #1 chosen from 1 choice
[ 16.695778] hub 2-0:1.0: USB hub found
[ 16.695791] hub 2-0:1.0: 2 ports detected
[ 16.805449] ACPI: PCI Interrupt 0000:00:1d.2[C] -> Link [LNKC] -> GSI 10 (lev
el, low) -> IRQ 10
[ 16.805475] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[ 16.805484] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 16.805534] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus numbe
r 3
[ 16.805574] uhci_hcd 0000:00:1d.2: irq 10, io base 0x0000e800
[ 16.805782] usb usb3: configuration #1 chosen from 1 choice
[ 16.805839] hub 3-0:1.0: USB hub found
[ 16.805852] hub 3-0:1.0: 2 ports detected
[ 16.915416] ACPI: PCI Interrupt 0000:00:1d.3[D] -> Link [LNKA] -> GSI 5 (leve
l, low) -> IRQ 5
[ 16.915440] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[ 16.915451] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 16.915499] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus numbe
r 4
[ 16.915540] uhci_hcd 0000:00:1d.3: irq 5, io base 0x0000e880
[ 16.915754] usb usb4: configuration #1 chosen from 1 choice
[ 16.915809] hub 4-0:1.0: USB hub found
[ 16.915823] hub 4-0:1.0: 2 ports detected
[ 17.096303] ACPI: PCI Interrupt 0000:00:1d.7[A] -> Link [LNKH] -> GSI 3 (leve
l, low) -> IRQ 3
[ 17.096334] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[ 17.096344] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 17.096399] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus numbe
r 5
[ 17.096455] ehci_hcd 0000:00:1d.7: debug port 1
[ 17.096466] PCI: cache line size of 32 is not supported by device 0000:00:1d.
7
[ 17.096482] ehci_hcd 0000:00:1d.7: irq 3, io mem 0xf7eb7c00
[ 17.100381] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec
2004
[ 17.100567] usb usb5: configuration #1 chosen from 1 choice
[ 17.100635] hub 5-0:1.0: USB hub found
[ 17.100647] hub 5-0:1.0: 8 ports detected
[ 17.241818] Atheros(R) L2 Ethernet Network Driver - version 1.0.40.4
[ 17.241828] Copyright (c) 2007 Atheros Corporation.
[ 17.241914] ACPI: PCI Interrupt 0000:03:00.0[A] -> Link [LNKB] -> GSI 11 (lev
el, low) -> IRQ 11
[ 17.241936] PCI: Setting latency timer of device 0000:03:00.0 to 64
[ 17.485042] usb 5-5: new high speed USB device using ehci_hcd and address 2
[ 17.528449] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 17.636290] usb 5-5: configuration #1 chosen from 1 choice
[ 17.685893] pciehp: HPC vendor_id 8086 device_id 2660 ss_vid 0 ss_did 0
[ 17.685954] Load service driver hpdriver on pcie device 0000:00:1c.0:pcie02
[ 17.685979] pciehp: HPC vendor_id 8086 device_id 2662 ss_vid 0 ss_did 0
[ 17.686026] Load service driver hpdriver on pcie device 0000:00:1c.1:pcie02
[ 17.686049] pciehp: HPC vendor_id 8086 device_id 2664 ss_vid 0 ss_did 0
[ 17.686092] Load service driver hpdriver on pcie device 0000:00:1c.2:pcie02
[ 17.686101] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 18.015062] ath_hal: 0.9.17.1 (AR5212, RF5111, RF5112, RF2413, RF5413)
[ 18.018627] ath_dfs: Version 2.0.0
[ 18.018632] Copyright (c) 2005-2006 Atheros Communications, Inc. All Rights R
eserved
[ 18.040457] wlan: 0.8.4.2 (Atheros/multi-bss)
[ 18.043140] ath_rate_atheros: no version for "ath_hal_getuptime" found: kerne
l tainted.
[ 18.044073] ath_rate_atheros: Version 2.0.1
[ 18.044076] Copyright (c) 2001-2004 Atheros Communications, Inc, All Rights R
eserved
[ 18.055712] ath_pci: 0.9.4.5 (Atheros/multi-bss)
[ 18.237553] usbcore: registered new interface driver libusual
[ 18.247511] Initializing USB Mass Storage driver...
[ 18.247651] scsi2 : SCSI emulation for USB Mass Storage devices
[ 18.247746] usb-storage: device found at 2
[ 18.247751] usb-storage: waiting for device to settle before scanning
[ 18.247772] usbcore: registered new interface driver usb-storage
[ 18.247780] USB Mass Storage support registered.
[ 11.320000] Time: acpi_pm clocksource has been installed.
[ 11.870000] Clocksource tsc unstable (delta = -69923935 ns)
[ 15.900000] scsi 2:0:0:0: Direct-Access USB2.0 CardReader SD0 0100 PQ
: 0 ANSI: 0
[ 15.900000] p4-clockmod: P4/Xeon(TM) CPU On-Demand Clock Modulation available
[ 15.910000] sd 2:0:0:0: Attached scsi removable disk sdb
[ 15.930000] usb-storage: device scan complete
[ 213.520000] usb 2-2: new low speed USB device using uhci_hcd and address 2
[ 213.690000] usb 2-2: configuration #1 chosen from 1 choice
[ 213.710000] input: USB Optical Mouse as /class/input/input6
[ 213.710000] input: USB HID v1.10 Mouse [USB Optical Mouse] on usb-0000:00:1d.
1-2
/home/user> lsusb
Bus 003 Device 001: ID 0000:0000
Bus 002 Device 002: ID 15ca:00c3
Bus 002 Device 001: ID 0000:0000
Bus 005 Device 002: ID 0951:1606 Kingston Technology
Bus 005 Device 001: ID 0000:0000
Bus 004 Device 001: ID 0000:0000
Bus 001 Device 001: ID 0000:0000

Grothesk
01.07.08, 20:57
Waren die Lautsprecher angesteckt?
Ich sehe die nämlich nirgendwo. 15ca:00c3 ist wohl das Touchpad oder sowas, 0951:1606 ist der Kartenleser, sonst sind da keine USB-Geräte.

PC-amateur
01.07.08, 21:04
ja.....die waren angesteckt.....das is ja das problem, dass der die überhaupt nicht erkennt.....aber strom bekommen die lautsprecher, da sie blau leuchten

ja touchpad kann ssein......

Sidolin
01.07.08, 21:09
Hi,
ich finde die gerade in dem Output auch nicht.

Grundsätzlich denke ich dass die von Haus aus gehen sollten, das Problem ist wahrscheinlich dass die Lautsprecher nicht als Standard hergenommen werden sondern die internen der Standard sind und nur deswegen nichts kommt. Was du mal probieren könntest wäre die Lautsprecher vor dem booten schon anzustecken und dann mit angesteckten Lautsprechern hochzufahren.

Trotzdem wäre dmesg/lsusb mit angesteckten Lautsprechern interessant. Zumindest in lsusb muss irgendwas davon auftauchen.

PC-amateur
01.07.08, 21:11
ok ich probiere das mal...

PC-amateur
01.07.08, 21:18
verdammt...da zeigt es immer nur dieses 15ca:00c3 an

Sidolin
01.07.08, 21:29
Gibt es irgendeinen Unterschied bei lsusb wenn die Lautsprecher angesteckt sind oder nicht? Und vielleicht mal nen anderen Usb-Port probieren.

PC-amateur
01.07.08, 21:31
hab ich alles schon gemacht....übrigens ist 15ca:00c3 meine usb-maus....ich weis nicht mehr weiter...

Aqualung
01.07.08, 21:33
Hast Du schon versucht, sie mit

YaST > Hardware > Sound

einzurichten?

PC-amateur
01.07.08, 21:45
was iost denn yast?

stefan.becker
01.07.08, 21:47
Vergiss es, das ist wohl ein Missverständnis. Yast gehört zu Suse Linux.

Sidolin
01.07.08, 22:01
Na dann mal weiter mit der Fehlersuche :) Was sagt "cat /proc/asound/cards"?

Und muss/kann man die Lautsprecher noch irgendwie anschalten? Gehen sie an einem anderen Computer?

Aqualung
01.07.08, 22:10
"Einstellungen" > "Diagnose-Werkzeuge" > "Details" > "Audio"
Was steht da?

Nach
http://www.qbik.ch/usb/devices/showdev.php?id=3972


In der Konsole eingeben:



sudo /sbin/modprobe snd-usb-audio
dmesg

PC-amateur
02.07.08, 16:48
Und muss/kann man die Lautsprecher noch irgendwie anschalten? Gehen sie an einem anderen Computer?

jaa an anderen gehen sie..und sie sind sofort angeschalten, sobald ich sie anstecke...aber ich habe ja eigentlich gefargt ob es einen treiber gibt, den ich nutzen kann und nicht nach fehlern. Ich hab nähmlich gelesen, dass die lautsprecher nur für windows gemacht sind.

PC-amateur
02.07.08, 17:01
@ Aqualung

also da steht:

card 0 Intel (HDA Intel), device 0:Realtek ALC662
Subdevices 1/1
Subdevices#0 subdevice #0


was meinst du mit dem "Nach dem link" den code eingeben

der link auf der page funktioniert übrigens nicht.....
und wo soll ich den code eingeben....wieder in dieses "Strg+Alt+T"??

Aqualung
02.07.08, 17:07
Ja, wo sonst?

PC-amateur
02.07.08, 17:24
also ich muss das immer mit so nem "/" trennen?