PDA

Archiv verlassen und diese Seite im Standarddesign anzeigen : Keine Soundausgabe unter openSuse, bei anderen Distributionen schon



rx9
06.06.08, 09:37
Hallo,

ich habe mir openSuse eingerichtet, was auch wunderbar läuft, bis auf den Ton, in debian basierenden Distris (Sidux und Ubuntu) klappt alles out of the box.

Ich habe eine Hercules Muse 5.1 Gamesourround Karte, die an einen Verstärker angeschlossen ist. Die OnBoardkarte müsste über Bios deaktiviert sein.

Hier ein paar Ausgaben aus dem Yast-Support Daten:

Buttons: --sound ##Y2support-/tmp/siga/siga.txt:
1. Hardware

-------------------------------------------------------------------------------

1.1 procinfo - /usr/bin/procinfo


Linux 2.6.22.17-0.1-default (geeko@buildhost) (gcc 4.2.1) #1 1CPU [kiste.]
Memory: Total Used Free Shared Buffers
Mem: 516176 509392 6784 0 17068
Swap: 779112 36 779076
Bootup: Fri Jun 6 09:03:37 2008 Load average: 0.17 0.29 0.43 3/253 6220
user : 0:02:43.43 9.3% page in : 638449 disk 1: 42465r 18246w
nice : 0:00:16.10 0.9% page out: 219805 disk 2: 378r 1w
system: 0:00:59.88 3.4% page act: 104509 disk 3: 74r 1w
IOwait: 0:02:37.44 8.9% page dea: 42865 disk 4: 1010r 1w
hw irq: 0:00:06.21 0.4% page flt: 1711833
sw irq: 0:00:01.66 0.1% swap in : 3
idle : 0:25:05.82 85.4% swap out: 10
uptime: 0:29:22.92 context : 1749435
irq 0: 263 timer irq 8: 2 rtc
irq 1: 1671 i8042 irq 9: 0 acpi
irq 2: 0 cascade [4] irq 10: 433981 ohci_hcd:usb3, cx88[0
irq 3: 5 irq 11: 182909 ohci_hcd:usb1, eth0
irq 4: 6 irq 12: 4816 ehci_hcd:usb2
irq 6: 5 floppy [2] irq 14: 61797 libata
irq 7: 145 parport0 irq 15: 18448 libata

-------------------------------------------------------------------------------

1.2 cmdline - /proc/cmdline


root=/dev/disk/by-id/scsi-SATA_SAMSUNG_SP1634NS0BKJ1RY900778-part6 vga=0x31a resume=/dev/sda5 splash=silent

-------------------------------------------------------------------------------

1.3 IO-Ports - /proc/ioports


0000-001f : dma1
0020-0021 : pic1
0040-0043 : timer0
0050-0053 : timer1
0060-006f : keyboard
0070-0077 : rtc
0080-008f : dma page reg
00a0-00a1 : pic2
00c0-00df : dma2
00f0-00ff : fpu
0170-0177 : 0000:00:09.0
0170-0177 : libata
01f0-01f7 : 0000:00:09.0
01f0-01f7 : libata
02f8-02ff : serial
0376-0376 : 0000:00:09.0
0376-0376 : libata
0378-037a : parport0
03c0-03df : vesafb
03f2-03f5 : floppy
03f6-03f6 : 0000:00:09.0
03f6-03f6 : libata
03f7-03f7 : floppy DIR
03f8-03ff : serial
0cf8-0cff : PCI conf1
4000-407f : pnp 00:00
4000-4003 : ACPI PM1a_EVT_BLK
4004-4005 : ACPI PM1a_CNT_BLK
4008-400b : ACPI PM_TMR
4020-4027 : ACPI GPE0_BLK
4080-40ff : pnp 00:00
4200-427f : pnp 00:00
4280-42ff : pnp 00:00
4400-447f : pnp 00:00
4480-44ff : pnp 00:00
44a0-44af : ACPI GPE1_BLK
5000-503f : pnp 00:01
5000-503f : nForce2_smbus
5100-513f : pnp 00:01
5100-513f : nForce2_smbus
9000-9fff : PCI Bus #01
9000-90ff : 0000:01:0a.0
a000-afff : PCI Bus #02
a000-a0ff : 0000:02:00.0
c000-c01f : 0000:00:01.1
c400-c407 : 0000:00:04.0
c400-c407 : forcedeth
f000-f00f : 0000:00:09.0
f000-f00f : libata

-------------------------------------------------------------------------------

1.4 lsPCI - /sbin/lspci


00:00.0 Host bridge: nVidia Corporation nForce2 AGP (different version?) (rev c1)
00:00.1 RAM memory: nVidia Corporation nForce2 Memory Controller 1 (rev c1)
00:00.2 RAM memory: nVidia Corporation nForce2 Memory Controller 4 (rev c1)
00:00.3 RAM memory: nVidia Corporation nForce2 Memory Controller 3 (rev c1)
00:00.4 RAM memory: nVidia Corporation nForce2 Memory Controller 2 (rev c1)
00:00.5 RAM memory: nVidia Corporation nForce2 Memory Controller 5 (rev c1)
00:01.0 ISA bridge: nVidia Corporation nForce2 ISA Bridge (rev a4)
00:01.1 SMBus: nVidia Corporation nForce2 SMBus (MCP) (rev a2)
00:02.0 USB Controller: nVidia Corporation nForce2 USB Controller (rev a4)
00:02.1 USB Controller: nVidia Corporation nForce2 USB Controller (rev a4)
00:02.2 USB Controller: nVidia Corporation nForce2 USB Controller (rev a4)
00:04.0 Ethernet controller: nVidia Corporation nForce2 Ethernet Controller (rev a1)
00:08.0 PCI bridge: nVidia Corporation nForce2 External PCI Bridge (rev a3)
00:09.0 IDE interface: nVidia Corporation nForce2 IDE (rev a2)
00:1e.0 PCI bridge: nVidia Corporation nForce2 AGP (rev c1)
01:07.0 Multimedia video controller: Conexant CX23880/1/2/3 PCI Video and Audio Decoder (rev 05)
01:07.1 Multimedia controller: Conexant CX23880/1/2/3 PCI Video and Audio Decoder [Audio Port] (rev 05)
01:07.2 Multimedia controller: Conexant CX23880/1/2/3 PCI Video and Audio Decoder [MPEG Port] (rev 05)
01:07.4 Multimedia controller: Conexant CX23880/1/2/3 PCI Video and Audio Decoder [IR Port] (rev 05)
01:0a.0 Multimedia audio controller: C-Media Electronics Inc CM8738 (rev 10)
02:00.0 VGA compatible controller: ATI Technologies Inc RV280 [Radeon 9200 PRO] (rev 01)
02:00.1 Display controller: ATI Technologies Inc RV280 [Radeon 9200 PRO] (Secondary) (rev 01)

lspci - /sbin/lspci -vvv

00:00.0 Host bridge: nVidia Corporation nForce2 AGP (different version?) (rev c1)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- Reset- FastB2B-
00:09.0 IDE interface: nVidia Corporation nForce2 IDE (rev a2) (prog-if 8a [Master SecP PriP])
Subsystem: Unknown device f0de:0c11
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- SERR- TAbort- SERR- TAbort- Reset- FastB2B-
01:07.0 Multimedia video controller: Conexant CX23880/1/2/3 PCI Video and Audio Decoder (rev 05)
Subsystem: Hauppauge computer works Inc. Nova-S-Plus DVB-S
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- &1 |:; /sbin/modprobe --ignore-install ata_piix
include /etc/modprobe.d
include /etc/modprobe.conf.local

-------------------------------------------------------------------------------

3.2 modprobe.conf.local - /etc/modprobe.conf.local


no output

-------------------------------------------------------------------------------

3.3 modprobe.d sound - /etc/modprobe.d/sound


options snd-cmipci enable=1 index=0
alias snd-card-0 snd-cmipci

-------------------------------------------------------------------------------

3.4 sysconfig sound - /etc/sysconfig/sound


LOAD_SEQUENCER="yes"
SOUNDFONT_FILES=""
LOAD_OSS_EMUL_MODULES="yes"
LOAD_OSS_SEQ_MODULE="no"

-------------------------------------------------------------------------------

3.5 messages filtered

tail -n 200 /var/log/messages

Jun 5 21:41:43 kiste SuSEfirewall2: Firewall rules successfully set
Jun 5 21:41:43 kiste kernel: bootsplash: status on console 0 changed to on
Jun 5 21:41:43 kiste kernel: klogd 1.4.1, ---------- state change ----------
Jun 5 22:11:41 kiste smartd[4414]: Device: /dev/sda, SMART Prefailure Attribute: 1 Raw_Read_Error_Rate changed from 252 to 100
Jun 5 22:11:41 kiste smartd[4414]: Device: /dev/sda, SMART Usage Attribute: 190 Temperature_Celsius changed from 148 to 139
Jun 5 22:11:41 kiste smartd[4414]: Device: /dev/sda, SMART Usage Attribute: 194 Temperature_Celsius changed from 148 to 139
Jun 5 22:11:41 kiste smartd[4414]: Device: /dev/sda, SMART Usage Attribute: 199 UDMA_CRC_Error_Count changed from 199 to 200
Jun 5 22:11:41 kiste smartd[4414]: Device: /dev/sdb, SMART Usage Attribute: 194 Temperature_Celsius changed from 177 to 141
Jun 5 22:12:34 kiste sudo: moritz : 1 incorrect password attempt ; TTY=pts/1 ; PWD=/home/moritz ; USER=root ; COMMAND=/opt/kde3/bin/kdesu_stub -
Jun 5 22:12:34 kiste sudo: moritz : 1 incorrect password attempt ; TTY=pts/1 ; PWD=/home/moritz ; USER=root ; COMMAND=/opt/kde3/bin/kdesu_stub -
Jun 5 22:12:44 kiste sudo: moritz : TTY=pts/1 ; PWD=/home/moritz ; USER=root ; COMMAND=/opt/kde3/bin/kdesu_stub -
Jun 5 22:12:44 kiste sudo: moritz : TTY=pts/1 ; PWD=/home/moritz ; USER=root ; COMMAND=/opt/kde3/bin/kdesu_stub -
Jun 5 22:18:29 kiste sudo: pam_unix2(sudo:auth): conversation failed
Jun 5 22:18:29 kiste sudo: moritz : pam_authenticate: Conversation error ; TTY=pts/0 ; PWD=/home/moritz ; USER=root ; COMMAND=/opt/kde3/bin/kdesu_stub -
Jun 5 22:35:50 kiste sudo: moritz : TTY=pts/1 ; PWD=/home/moritz ; USER=root ; COMMAND=/opt/kde3/bin/kdesu_stub -
Jun 5 22:35:50 kiste sudo: moritz : TTY=pts/1 ; PWD=/home/moritz ; USER=root ; COMMAND=/opt/kde3/bin/kdesu_stub -
Jun 5 22:37:26 kiste kernel: ALSA sound/core/init.c:137: cannot find the slot for index 0 (range 0-0), error: -16
Jun 5 22:37:26 kiste kernel: C-Media PCI: probe of 0000:01:0a.0 failed with error -12
Jun 5 22:37:58 kiste kernel: ALSA sound/core/init.c:137: cannot find the slot for index 0 (range 0-0), error: -16
Jun 5 22:37:58 kiste kernel: C-Media PCI: probe of 0000:01:0a.0 failed with error -12
Jun 5 22:38:38 kiste kernel: NET: Registered protocol family 4
Jun 5 22:41:24 kiste syslog-ng[2608]: STATS: dropped 0
Jun 5 22:41:41 kiste smartd[4414]: Device: /dev/sda, SMART Usage Attribute: 190 Temperature_Celsius changed from 139 to 133
Jun 5 22:41:41 kiste smartd[4414]: Device: /dev/sda, SMART Usage Attribute: 194 Temperature_Celsius changed from 139 to 133
Jun 5 22:41:41 kiste smartd[4414]: Device: /dev/sdb, SMART Usage Attribute: 194 Temperature_Celsius changed from 141 to 137
Jun 5 23:11:42 kiste smartd[4414]: Device: /dev/sdb, SMART Usage Attribute: 194 Temperature_Celsius changed from 137 to 134
Jun 5 23:12:42 kiste su: FAILED SU (to root) moritz on /dev/pts/2
Jun 5 23:12:42 kiste su: FAILED SU (to root) moritz on /dev/pts/2
Jun 5 23:13:00 kiste su: (to root) moritz on /dev/pts/2
Jun 5 23:13:53 kiste kernel: ACPI: PCI Interrupt Link [LNK3] enabled at IRQ 5
Jun 5 23:13:53 kiste kernel: PCI: setting IRQ 5 as level-triggered
Jun 5 23:13:53 kiste kernel: ACPI: PCI Interrupt 0000:01:0a.0[A] -> Link [LNK3] -> GSI 5 (level, low) -> IRQ 5
Jun 5 23:14:09 kiste kernel: ACPI: PCI interrupt for device 0000:01:0a.0 disabled
Jun 5 23:14:51 kiste kernel: ACPI: PCI Interrupt 0000:01:0a.0[A] -> Link [LNK3] -> GSI 5 (level, low) -> IRQ 5
Jun 5 23:19:14 kiste sudo: moritz : 1 incorrect password attempt ; TTY=pts/5 ; PWD=/home/moritz ; USER=root ; COMMAND=/opt/kde3/bin/kdesu_stub -
Jun 5 23:19:14 kiste sudo: moritz : 1 incorrect password attempt ; TTY=pts/5 ; PWD=/home/moritz ; USER=root ; COMMAND=/opt/kde3/bin/kdesu_stub -
Jun 5 23:19:23 kiste sudo: moritz : TTY=pts/5 ; PWD=/home/moritz ; USER=root ; COMMAND=/opt/kde3/bin/kdesu_stub -
Jun 5 23:19:23 kiste sudo: moritz : TTY=pts/5 ; PWD=/home/moritz ; USER=root ; COMMAND=/opt/kde3/bin/kdesu_stub -
Jun 5 23:20:34 kiste kernel: ACPI: PCI interrupt for device 0000:01:0a.0 disabled
Jun 5 23:20:44 kiste kernel: ALSA sound/core/init.c:137: cannot find the slot for index 0 (range 0-1), error: -16
Jun 5 23:20:44 kiste kernel: C-Media PCI: probe of 0000:01:0a.0 failed with error -12
Jun 5 23:21:32 kiste kernel: ALSA sound/core/init.c:137: cannot find the slot for index 0 (range 0-1), error: -16
Jun 5 23:21:32 kiste kernel: C-Media PCI: probe of 0000:01:0a.0 failed with error -12
Jun 5 23:22:20 kiste kernel: ALSA sound/core/init.c:137: cannot find the slot for index 0 (range 0-1), error: -16
Jun 5 23:22:20 kiste kernel: C-Media PCI: probe of 0000:01:0a.0 failed with error -12
Jun 5 23:24:54 kiste sudo: pam_unix2(sudo:auth): conversation failed
Jun 5 23:24:54 kiste sudo: moritz : pam_authenticate: Conversation error ; TTY=pts/0 ; PWD=/home/moritz ; USER=root ; COMMAND=/opt/kde3/bin/kdesu_stub -
Jun 5 23:24:54 kiste sudo: pam_unix2(sudo:auth): conversation failed
Jun 5 23:24:54 kiste sudo: moritz : pam_authenticate: Conversation error ; TTY=pts/4 ; PWD=/home/moritz ; USER=root ; COMMAND=/opt/kde3/bin/kdesu_stub -
Jun 5 23:24:54 kiste hald: unmounted /dev/sr0 from '/media/SU1030.001' on behalf of uid 1000
Jun 5 23:24:56 kiste gconfd (moritz-4009): Signal 15 erhalten, ordungsgem es Herunterfahren
Jun 5 23:24:56 kiste gconfd (moritz-4009): Beenden
Jun 5 23:24:59 kiste hald: unmounted /dev/sdc from '/media/disk' on behalf of uid 1000
Jun 5 23:25:02 kiste shutdown[25490]: shutting down for system halt
Jun 5 23:25:02 kiste init: Switching to runlevel: 0
Jun 5 23:25:04 kiste kernel: bootsplash: status on console 0 changed to on
Jun 5 23:25:04 kiste audispd[3887]: input read: EOF
Jun 5 23:25:04 kiste auditd[3885]: The audit daemon is exiting.
Jun 5 23:25:04 kiste kernel: audit(1212701104.192:6): audit_pid=0 old=3885 by auid=4294967295
Jun 5 23:25:05 kiste smartd[4414]: smartd received signal 15: Terminated
Jun 5 23:25:05 kiste smartd[4414]: smartd is exiting (exit status 0)
Jun 5 23:25:05 kiste avahi-dnsconfd[3950]: Got SIGTERM, quitting.
Jun 5 23:25:06 kiste avahi-daemon[3906]: Got SIGTERM, quitting.
Jun 5 23:25:06 kiste avahi-daemon[3906]: Leaving mDNS multicast group on interface eth0.IPv4 with address 192.168.0.2.
Jun 5 23:25:06 kiste sshd[4409]: Received signal 15; terminating.
Jun 5 23:25:06 kiste kernel: Kernel logging (proc) stopped.
Jun 5 23:25:06 kiste kernel: Kernel log daemon terminating.
Jun 5 23:25:06 kiste syslog-ng[2608]: syslog-ng version 1.6.12 going down
Jun 6 09:05:04 kiste syslog-ng[2643]: syslog-ng version 1.6.12 starting
Jun 6 09:05:05 kiste rchal: CPU frequency scaling is not supported by your processor.
Jun 6 09:05:05 kiste rchal: boot with 'CPUFREQ=no' in to avoid this warning.
Jun 6 09:05:05 kiste rchal: Cannot load cpufreq governors - No cpufreq driver available
Jun 6 09:05:09 kiste kernel: klogd 1.4.1, log source = /proc/kmsg started.
Jun 6 09:05:09 kiste kernel: powernow-k8: Processor cpuid 6a0 not supported
Jun 6 09:05:12 kiste kernel: [drm] Initialized drm 1.1.0 20060810
Jun 6 09:05:12 kiste kernel: ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [LNK4] -> GSI 10 (level, low) -> IRQ 10
Jun 6 09:05:12 kiste kernel: [drm] Initialized radeon 1.27.0 20060524 on minor 0
Jun 6 09:05:13 kiste kernel: agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0.
Jun 6 09:05:13 kiste kernel: agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode
Jun 6 09:05:13 kiste kernel: agpgart: Putting AGP V3 device at 0000:02:00.0 into 8x mode
Jun 6 09:05:13 kiste kernel: ip6_tables: (C) 2000-2006 Netfilter Core Team
Jun 6 09:05:13 kiste SuSEfirewall2: Warning: ip6tables does not support state matching. Extended IPv6 support disabled.
Jun 6 09:05:13 kiste kernel: ip_tables: (C) 2000-2006 Netfilter Core Team
Jun 6 09:05:13 kiste kernel: [drm] Setting GART location based on new memory map
Jun 6 09:05:13 kiste kernel: [drm] Loading R200 Microcode
Jun 6 09:05:13 kiste kernel: [drm] writeback test succeeded in 1 usecs
Jun 6 09:05:13 kiste kernel: Netfilter messages via NETLINK v0.30.
Jun 6 09:05:14 kiste kernel: nf_conntrack version 0.5.0 (4095 buckets, 32760 max)
Jun 6 09:05:14 kiste SuSEfirewall2: batch committing...
Jun 6 09:05:14 kiste SuSEfirewall2: Firewall rules set to CLOSE.
Jun 6 09:05:16 kiste ifup: lo
Jun 6 09:05:16 kiste ifup: lo
Jun 6 09:05:16 kiste ifup: IP address: 127.0.0.1/8
Jun 6 09:05:16 kiste ifup:
Jun 6 09:05:17 kiste ifup: eth0 device: nVidia Corporation nForce2 Ethernet Controller (rev a1)
Jun 6 09:05:17 kiste ifup-dhcp: eth0 (DHCP)
Jun 6 09:05:17 kiste ifup-dhcp: .
Jun 6 09:05:17 kiste kernel: NET: Registered protocol family 17
Jun 6 09:05:17 kiste modify_resolvconf: Service dhcpcd modified /etc/resolv.conf. See info block in this file
Jun 6 09:05:18 kiste ifup-dhcp: .
Jun 6 09:05:18 kiste ifup-dhcp: .
Jun 6 09:05:19 kiste hald: mounted /dev/sdc on behalf of uid 1000
Jun 6 09:05:20 kiste ifup-dhcp: .
Jun 6 09:05:20 kiste ifup-dhcp: .
Jun 6 09:05:22 kiste kernel: JBD: barrier-based sync failed on dm-0 - disabling barriers
Jun 6 09:05:22 kiste ifup-dhcp: no IP address yet... backgrounding.
Jun 6 09:05:23 kiste ifup: eth0 device: nVidia Corporation nForce2 Ethernet Controller (rev a1)
Jun 6 09:05:24 kiste SuSEfirewall2: /var/lock/SuSEfirewall2.booting exists which means system boot in progress, exit.
Jun 6 09:05:24 kiste syslog-ng[2643]: SIGHUP received, restarting syslog-ng
Jun 6 09:05:25 kiste auditd[4011]: Started dispatcher: /sbin/audispd pid: 4013
Jun 6 09:05:25 kiste syslog-ng[2643]: new configuration initialized
Jun 6 09:05:25 kiste kernel: audit(1212735925.161:3): audit_pid=4011 old=0 by auid=4294967295
Jun 6 09:05:25 kiste kernel: klogd 1.4.1, ---------- state change ----------
Jun 6 09:05:25 kiste audispd[4013]: listening on /var/run/audit_events
Jun 6 09:05:25 kiste auditd[4011]: Init complete, auditd 1.5.5 listening for events (startup state disable)
Jun 6 09:05:26 kiste avahi-daemon[4029]: Found user 'avahi' (UID 103) and group 'avahi' (GID 105).
Jun 6 09:05:26 kiste avahi-daemon[4029]: Successfully dropped root privileges.
Jun 6 09:05:26 kiste avahi-daemon[4029]: avahi-daemon 0.6.20 starting up.
Jun 6 09:05:26 kiste avahi-daemon[4029]: Loading service file /etc/avahi/services/sftp-ssh.service.
Jun 6 09:05:26 kiste avahi-daemon[4029]: Loading service file /etc/avahi/services/ssh.service.
Jun 6 09:05:26 kiste avahi-daemon[4029]: Joining mDNS multicast group on interface eth0.IPv4 with address 192.168.0.2.
Jun 6 09:05:26 kiste avahi-daemon[4029]: New relevant interface eth0.IPv4 for mDNS.
Jun 6 09:05:26 kiste avahi-daemon[4029]: Network interface enumeration completed.
Jun 6 09:05:26 kiste avahi-daemon[4029]: Registering new address record for 192.168.0.2 on eth0.IPv4.
Jun 6 09:05:26 kiste avahi-daemon[4029]: Registering HINFO record with values 'I686'/'LINUX'.
Jun 6 09:05:27 kiste avahi-dnsconfd[4040]: Successfully connected to Avahi daemon.
Jun 6 09:05:27 kiste avahi-daemon[4029]: Server startup complete. Host name is kiste.local. Local service cookie is 319302328.
Jun 6 09:05:28 kiste gconfd (moritz-4053): (Version 2.20.0) wird gestartet, Prozesskennung 4053, Benutzer moritz
Jun 6 09:05:28 kiste gconfd (moritz-4053): Die Adresse xml:readonly:/etc/gconf/gconf.xml.mandatory wurde an der Position 0 zu einer nur lesbaren Konfigurationsquelle aufgel st
Jun 6 09:05:28 kiste gconfd (moritz-4053): Die Adresse xml:readwrite:/home/moritz/.gconf wurde an der Position 1 zu einer schreibbaren Konfigurationsquelle aufgel st
Jun 6 09:05:28 kiste gconfd (moritz-4053): Die Adresse xml:readonly:/etc/gconf/gconf.xml.defaults wurde an der Position 2 zu einer nur lesbaren Konfigurationsquelle aufgel st
Jun 6 09:05:28 kiste gconfd (moritz-4053): Die Adresse xml:readonly:/etc/gconf/gconf.xml.schemas wurde an der Position 3 zu einer nur lesbaren Konfigurationsquelle aufgel st
Jun 6 09:05:28 kiste avahi-daemon[4029]: Service "kiste" (/etc/avahi/services/ssh.service) successfully established.
Jun 6 09:05:28 kiste avahi-daemon[4029]: Service "SFTP File Transfer on kiste" (/etc/avahi/services/sftp-ssh.service) successfully established.
Jun 6 09:05:31 kiste kernel: usb 2-1: new high speed USB device using ehci_hcd and address 4
Jun 6 09:05:31 kiste kernel: usb 2-1: new device found, idVendor=04b4, idProduct=6830
Jun 6 09:05:31 kiste kernel: usb 2-1: new device strings: Mfr=56, Product=58, SerialNumber=60
Jun 6 09:05:31 kiste kernel: usb 2-1: Product:
Jun 6 09:05:31 kiste kernel: usb 2-1: Manufacturer:
Jun 6 09:05:31 kiste kernel: usb 2-1: SerialNumber: D
Jun 6 09:05:31 kiste kernel: usb 2-1: configuration #1 chosen from 1 choice
Jun 6 09:05:31 kiste kernel: scsi3 : SCSI emulation for USB Mass Storage devices
Jun 6 09:05:31 kiste kernel: usb-storage: device found at 4
Jun 6 09:05:31 kiste kernel: usb-storage: waiting for device to settle before scanning
Jun 6 09:05:32 kiste kernel: scsi 3:0:0:0: Direct-Access WDC WD32 00JB-00KFA0 0000 PQ: 0 ANSI: 0
Jun 6 09:05:32 kiste kernel: sd 3:0:0:0: [sdd] 625142448 512-byte hardware sectors (320073 MB)
Jun 6 09:05:32 kiste kernel: sd 3:0:0:0: [sdd] Write Protect is off
Jun 6 09:05:32 kiste kernel: sd 3:0:0:0: [sdd] Mode Sense: 27 00 00 00
Jun 6 09:05:32 kiste kernel: sd 3:0:0:0: [sdd] Assuming drive cache: write through
Jun 6 09:05:32 kiste kernel: sd 3:0:0:0: [sdd] 625142448 512-byte hardware sectors (320073 MB)
Jun 6 09:05:32 kiste kernel: sd 3:0:0:0: [sdd] Write Protect is off
Jun 6 09:05:32 kiste kernel: sd 3:0:0:0: [sdd] Mode Sense: 27 00 00 00
Jun 6 09:05:32 kiste kernel: sd 3:0:0:0: [sdd] Assuming drive cache: write through
Jun 6 09:05:32 kiste kernel: sdd: sdd1
Jun 6 09:05:32 kiste kernel: sd 3:0:0:0: [sdd] Attached SCSI disk
Jun 6 09:05:32 kiste kernel: sd 3:0:0:0: Attached scsi generic sg4 type 0
Jun 6 09:05:32 kiste kernel: usb-storage: device scan complete
Jun 6 09:05:33 kiste hald: mounted /dev/sdd1 on behalf of uid 1000
Jun 6 09:05:40 kiste /usr/sbin/cron[4317]: (CRON) STARTUP (V5.0)
Jun 6 09:05:45 kiste powersaved[4372]: WARNING (CpufreqManagement:51) No capability cpufreq_control
Jun 6 09:05:45 kiste powersaved[4372]: WARNING (CpufreqManagement:51) No capability cpufreq_control
Jun 6 09:05:45 kiste smartd[4378]: smartd version 5.37 [i686-suse-linux-gnu] Copyright (C) 2002-6 Bruce Allen
Jun 6 09:05:45 kiste smartd[4378]: Home page is http://smartmontools.sourceforge.net/
Jun 6 09:05:45 kiste smartd[4378]: Opened configuration file /etc/smartd.conf
Jun 6 09:05:45 kiste smartd[4378]: Drive: DEVICESCAN, implied '-a' Directive on line 27 of file /etc/smartd.conf
Jun 6 09:05:47 kiste sshd[4429]: Server listening on 0.0.0.0 port 22.
Jun 6 09:05:45 kiste smartd[4378]: Configuration file /etc/smartd.conf was parsed, found DEVICESCAN, scanning devices
Jun 6 09:05:47 kiste smartd[4378]: Problem creating device name scan list
Jun 6 09:05:47 kiste smartd[4378]: Device: /dev/sda, opened
Jun 6 09:05:46 kiste SuSEfirewall2: Setting up rules from /etc/sysconfig/SuSEfirewall2 ...
Jun 6 09:05:47 kiste SuSEfirewall2: Warning: no default firewall zone defined, assuming 'ext'
Jun 6 09:05:47 kiste smartd[4378]: Device /dev/sda: ATA disk detected behind SAT layer
Jun 6 09:05:47 kiste smartd[4378]: Try adding '-d sat' to the device line in the smartd.conf file.
Jun 6 09:05:47 kiste smartd[4378]: For example: '/dev/sda -a -d sat'
Jun 6 09:05:47 kiste smartd[4378]: Device: /dev/sdb, opened
Jun 6 09:05:47 kiste smartd[4378]: Device /dev/sdb: ATA disk detected behind SAT layer
Jun 6 09:05:47 kiste smartd[4378]: Try adding '-d sat' to the device line in the smartd.conf file.
Jun 6 09:05:47 kiste smartd[4378]: For example: '/dev/sdb -a -d sat'
Jun 6 09:05:47 kiste smartd[4378]: Device: /dev/sdc, opened
Jun 6 09:05:47 kiste smartd[4378]: Device: /dev/sdc, Bad IEC (SMART) mode page, err=5, skip device
Jun 6 09:05:48 kiste smartd[4378]: Device: /dev/sdd, opened
Jun 6 09:05:47 kiste SuSEfirewall2: batch committing...
Jun 6 09:05:48 kiste smartd[4378]: Device: /dev/sdd, IE (SMART) not enabled, skip device Try 'smartctl -s on /dev/sdd' to turn on SMART features
Jun 6 09:05:48 kiste smartd[4378]: Device: /dev/sda, opened
Jun 6 09:05:48 kiste smartd[4378]: Device: /dev/sda, found in smartd database.
Jun 6 09:05:49 kiste smartd[4378]: Device: /dev/sda, is SMART capable. Adding to "monitor" list.
Jun 6 09:05:49 kiste smartd[4378]: Device: /dev/sdb, opened
Jun 6 09:05:49 kiste smartd[4378]: Device: /dev/sdb, found in smartd database.
Jun 6 09:05:50 kiste smartd[4378]: Device: /dev/sdb, is SMART capable. Adding to "monitor" list.
Jun 6 09:05:50 kiste smartd[4378]: Device: /dev/sdc, opened
Jun 6 09:05:50 kiste smartd[4378]: Device: /dev/sdc, not ATA, no IDENTIFY DEVICE Structure
Jun 6 09:05:50 kiste smartd[4378]: Device: /dev/sdd, opened
Jun 6 09:05:50 kiste smartd[4378]: Device: /dev/sdd, not ATA, no IDENTIFY DEVICE Structure
Jun 6 09:05:50 kiste smartd[4378]: Monitoring 2 ATA and 0 SCSI devices
Jun 6 09:05:50 kiste SuSEfirewall2: Firewall rules successfully set
Jun 6 09:05:51 kiste kernel: bootsplash: status on console 0 changed to on
Jun 6 09:05:51 kiste smartd[4518]: smartd has fork()ed into background mode. New PID=4518.
Jun 6 09:20:33 kiste sudo: moritz : 1 incorrect password attempt ; TTY=pts/2 ; PWD=/home/moritz ; USER=root ; COMMAND=/opt/kde3/bin/kdesu_stub -
Jun 6 09:20:37 kiste sudo: moritz : TTY=pts/2 ; PWD=/home/moritz ; USER=root ; COMMAND=/opt/kde3/bin/kdesu_stub -
Jun 6 09:20:37 kiste sudo: moritz : TTY=pts/2 ; PWD=/home/moritz ; USER=root ; COMMAND=/opt/kde3/bin/kdesu_stub -

-------------------------------------------------------------------------------

##Y2support-/tmp/siga/siga.txt--


Ich hoffe, mir kann jemand helfen

MFG

rx9

gropiuskalle
06.06.08, 14:54
Versuche es erstmal ganz schlicht mit


alsaconf

rx9
06.06.08, 15:56
# alsaconf
┌───────────────────────────────────────────────── ────────────┐
│ │
│ ALSA CONFIGURATOR │
│ version 1.0.14 │
│ │
│ This script is a configurator for │
│ Advanced Linux Sound Architecture (ALSA) driver. │
│ │
│ │
│ If ALSA is already running, you should close all sound │
│ apps now and stop the sound driver. │
│ alsaconf will try to do this, but it's not 100% sure. │
│ │
│ │
│ │
│ │
│ │
├───────────────────────────────────────────────── ────────────┤
│ < OK > │
└───────────────────────────────────────────────── ────────────┘

┌──────────────────────────────────────┐
│ Searching sound cards │
│ ┌────────────────────────────────┐ │
│ │ 97% │ │
│ └────────────────────────────────┘ │
└──────────────────────────────────────┘

┌──────────────────────────Soundcard Selection─────────────────────────────┐
│ │
│ Following card(s) are found on your system. │
│ Choose a soundcard to configure: │
│ ┌───────────────────────────────────────────────── ─────────────────────┐ │
│ │ cmipci C-Media Electronics Inc CM8738 (rev 10) │ │
│ │ legacy Probe legacy ISA (non-PnP) chips │ │
│ │ │ │
│ │ │ │
│ │ │ │
│ │ │ │
│ │ │ │
│ │ │ │
│ └───────────────────────────────────────────────── ─────────────────────┘ │
├───────────────────────────────────────────────── ─────────────────────────┤
│ < OK > <Abbrechen> │
└───────────────────────────────────────────────── ─────────────────────────┘

┌──────────────────────────────────────────── ────┐
│ │
│ Configuring snd-cmipci │
│ Do you want to modify /etc/modprobe.d/sound │
│ (and /etc/modprobe.conf if present)? │
├──────────────────────────────────────────── ────┤
│ < Ja > < Nein > │
└──────────────────────────────────────────── ────┘
┌───────────────────────────────────────────────── ─────────┐
│ │
│ │
│ OK, sound driver is configured. │
│ │
│ ALSA CONFIGURATOR │
│ │
│ will prepare the card for playing now. │
│ │
│ Now I'll run alsasound init script, then I'll use │
│ amixer to raise the default volumes. │
│ You can change the volume later via a mixer │
│ program such as alsamixer or gamix. │
│ │
├───────────────────────────────────────────────── ────92%──┤
│ < OK > │
└───────────────────────────────────────────────── ─────────┘



Loading driver...
Shutting down sound driverERROR: Module snd_pcm is in use by cx88_alsa
ERROR: Module snd_timer is in use by snd_pcm
ERROR: Module snd is in use by cx88_alsa,snd_pcm,snd_timer
failed
Starting sound driver: cmipci done
Setting default volumes...
┌───────────────────────────────────────────────── ──────────────┐
│ │
│ The mixer is set up now for for playing. │
│ Shall I try to play a sound sample now? │
│ │
│ NOTE: │
│ If you have a big amplifier, lower your volumes or say no. │
│ Otherwise check that your speaker volume is open, │
│ and look if you can hear test sound. │
│ │
├───────────────────────────────────────────────── ──────────────┤
│ < Ja > < Nein > │
└───────────────────────────────────────────────── ──────────────┘

aplay: main:546: audio open error: Datei oder Verzeichnis nicht gefunden

================================================== =============================

Now ALSA is ready to use.
For adjustment of volumes, use your favorite mixer.

Have a lot of fun!



Bin ich durchgegangen, ich hör aber leider immer noch nix.

rx9
08.06.08, 16:41
Durch Zufall habe ich festgestellt, das Kaffeine Ton bei Videos abspielt. Bei wine kommt seltsames rauschen und das system sonst bleicbt stumm.

Höchst Merkwürdig...