Altes Schätzchen ubuntuisieren

[stracki123]

Hallo,
es geht um ein altes Satellite 1130Z27.
Habe es mit Ubuntu8.04 gestartet, alles außer Wlan geht.
Hier lspci:

ubuntu@ubuntu:~$ lspci
00:00.0 Host bridge: Intel Corporation 82852/82855 GM/GME/PM/GMV Processor to I/O Controller (rev 01)
00:00.1 System peripheral: Intel Corporation 82852/82855 GM/GME/PM/GMV Processor to I/O Controller (rev 01)
00:00.3 System peripheral: Intel Corporation 82852/82855 GM/GME/PM/GMV Processor to I/O Controller (rev 01)
00:02.0 VGA compatible controller: Intel Corporation 82852/855GM Integrated Graphics Device (rev 01)
00:02.1 Display controller: Intel Corporation 82852/855GM Integrated Graphics Device (rev 01)
00:1d.0 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 (rev 03)
00:1d.1 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2 (rev 03)
00:1d.2 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3 (rev 03)
00:1d.7 USB Controller: Intel Corporation 82801DB/DBM (ICH4/ICH4-M) USB2 EHCI Controller (rev 03)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 83)
00:1f.0 ISA bridge: Intel Corporation 82801DBM (ICH4-M) LPC Interface Bridge (rev 03)
00:1f.1 IDE interface: Intel Corporation 82801DBM (ICH4-M) IDE Controller (rev 03)
00:1f.3 SMBus: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) SMBus Controller (rev 03)
00:1f.5 Multimedia audio controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller (rev 03)
00:1f.6 Modem: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Modem Controller (rev 03)
02:01.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
02:02.0 CardBus bridge: Texas Instruments PCI1410 PC card Cardbus Controller (rev 01)
02:04.0 CardBus bridge: O2 Micro, Inc. OZ6933/711E1 CardBus/SmartCardBus Controller (rev 01)
02:04.1 CardBus bridge: O2 Micro, Inc. OZ6933/711E1 CardBus/SmartCardBus Controller (rev 01)
ubuntu@ubuntu:~$


habe ich eine Chance

besten Dank

Jürgen

[quinte17]

mhh ich weiß nicht ob man hier deine frage verstanden hat...
wenn die live-version geht, warum sollte die installliert nicht auch so funktionieren können? oder ist dir das wlan im speziellen wichtig? hast du genug festplatte, wieviel ram ist da drin? was soll das ding tun?
fragen über fragen ;)

greetz

[Newbie314]

Ich kenne mich mit WLAN Interfaces nicht aus, aber ich habe in deinem Listing keinen Eintrag entdeckt den ich für ein WLAN Interface halten würde .. nur ein Modem und ein Ethernet....

=> Kann es sein dass dein WLAN Baustein nicht automatisch erkannt wurde ?

[drcux]

Oder ist es gar ein USB Gerät?

lsusb

[stracki123]

Hallo,
Wlan ist mir wichtig
es ist eine mini-pci Karte.
Es handelt sich um das Notebook meines Sohnes, da er mit dem Teil nur im Internet rumwohnt und kürzlich Theater mit Viren hatte dachte ich an Ubuntu als Zweit-system.
Platten-platz ist vorhanden(120GB)
Da war mal Suse drauf (als es noch mir gehörte), hat irgendwann nicht mehr funktioniert (das Wlan).
Unter Windows läuft es.
Was müsst Ihr sonst noch wissen?

danke

Jürgen

[Rain_maker]

es ist eine mini-pci Karte.

Dann müsste lspci sie aber zumindest anzeigen. Keine Ausgabe von lspci bedeutet eigentlich soviel wie "physikalisch gar nicht vorhanden".



Da war mal Suse drauf (als es noch mir gehörte), hat irgendwann nicht mehr funktioniert (das Wlan).

Aha.



Unter Windows läuft es.

Sicher? Wann wurde das zum letzten Mal getestet?

Wie nennt Windows das Kind denn?

Irgendwas im BIOS umgestellt?

Da die Karte in lspci nicht zu sehen ist wäre nämlich ansonsten die erste Vermutung HW-Defekt/Anschlussproblem.

[stracki123]

Toshiba Wireless LAN Mini PCI Cart

Ort:Texas Instroments PCI-1410 Cartbus-Controller

für mich nicht sehr aufschlussreich

Gruß

Jürgen

[Rain_maker]

für mich nicht sehr aufschlussreich

Für mich auch nicht.

Greetz,

RM

[stracki123]

Für mich auch nicht.

Greetz,

RM

Dann vergess mas

trotzdem herzlichen Dank :):):)

[Rain_maker]

OK, noch einmal zur Verdeutlichung.

Wenn Linux die Karte nicht einmal "sieht" (und bei lspci müsste eine MINI-PCI-Karte angezeigt werden, meine ipw2200 wird da auch aufgelistet), dann ist das zu 99% ein HW-Problem, deshalb wundert es mich auch, wieso dieses Karte unter Windows funktionieren kann.

Eine BIOS-Option (= Karte so ausknipsen, daß sie gar nichts mehr tut und sich nicht mal mehr bei lspci "meldet") würde ja ebenfalls beide OS betreffen, es sei denn, man kann unter Windows softwaregesteuert die Karte irgendwie "Anknipsen" und z.B. beim Runterfahren wird die arte von Windows wieder "ausgeknipst".

Also einziger Ansatzpunkt wären eben da nachzusehen, ob es eine entsprechende Option gibt.

Auf jeden Fall lese ich zum ersten Mal von solche einem Verhalten, bisher war es immer so, daß wenn lspci bzw. lsusb eine Hardware nicht fanden (und wenn es auch "nur" als "unknown device" war), dann war die HW auch entweder im Eimer oder nicht richtig angeschlossen.

Greetz,

RM

[pcdog]

gib uns mal die ausgabe von

1) dmesg
2) lspci -v
3) lshw


merci

[stracki123]

ubuntu@ubuntu:~$ dmesg
[ 0.000000] Linux version 2.6.24-16-generic (buildd@palmer) (gcc version 4.2.3 (Ubuntu 4.2.3-2ubuntu7)) #1 SMP Thu Apr 10 13:23:42 UTC 2008 (Ubuntu 2.6.24-16.30-generic)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000ce000 - 00000000000d0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000d8000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000001eee0000 (usable)
[ 0.000000] BIOS-e820: 000000001eee0000 - 000000001eeeb000 (ACPI data)
[ 0.000000] BIOS-e820: 000000001eeeb000 - 000000001ef00000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000001ef00000 - 0000000020000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec10000 - 00000000fec20000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff800000 - 00000000ffc00000 (reserved)
[ 0.000000] BIOS-e820: 00000000fffffc00 - 0000000100000000 (reserved)
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 494MB LOWMEM available.
[ 0.000000] Entering add_active_range(0, 0, 126688) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 126688
[ 0.000000] HighMem 126688 -> 126688
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 126688
[ 0.000000] On node 0 totalpages: 126688
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 957 pages used for memmap
[ 0.000000] Normal zone: 121635 pages, LIFO batch:31
[ 0.000000] HighMem zone: 0 pages used for memmap
[ 0.000000] Movable zone: 0 pages used for memmap
[ 0.000000] DMI present.
[ 0.000000] ACPI: RSDP signature @ 0xC00F6940 checksum 0
[ 0.000000] ACPI: RSDP 000F6940, 0014 (r0 TOSCPL)
[ 0.000000] ACPI: RSDT 1EEE55C7, 0030 (r1 TOSCPL Montara 6040000 LTP 0)
[ 0.000000] ACPI: FACP 1EEEAED2, 0074 (r1 INTEL2 MONTARAG 6040000 PTL 50)
[ 0.000000] ACPI: DSDT 1EEE55FB, 58D7 (r1 TOSCPL MONTARAG 6040000 MSFT 100000E)
[ 0.000000] ACPI: FACS 1EEFBFC0, 0040
[ 0.000000] ACPI: BOOT 1EEEAFD8, 0028 (r1 PTLTD $SBFTBL$ 6040000 LTP 1)
[ 0.000000] ACPI: APIC 1EEEAF7E, 005A (r1 INTEL MONTARAG 6040000 PTL 50)
[ 0.000000] ACPI: DMI detected: Toshiba
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 15:2 APIC version 20
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 30000000 (gap: 20000000:dec10000)
[ 0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
[ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000ce000
[ 0.000000] swsusp: Registered nosave memory region: 00000000000ce000 - 00000000000d0000
[ 0.000000] swsusp: Registered nosave memory region: 00000000000d0000 - 00000000000d8000
[ 0.000000] swsusp: Registered nosave memory region: 00000000000d8000 - 0000000000100000
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 125699
[ 0.000000] Kernel command line: BOOT_IMAGE=/casper/vmlinuz file=/cdrom/preseed/ubuntu.seed boot=casper initrd=/casper/initrd.gz quiet splash -- debian-installer/language=de console-setup/layoutcode=de
[ 0.000000] mapped APIC to ffffb000 (fee00000)
[ 0.000000] mapped IOAPIC to ffffa000 (fec00000)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 2048 (order: 11, 8192 bytes)
[ 0.000000] Detected 1598.713 MHz processor.
[ 65.261204] Console: colour VGA+ 80x25
[ 65.261211] console [tty0] enabled
[ 65.261569] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 65.261956] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 65.277615] Memory: 490148k/506752k available (2157k kernel code, 16144k reserved, 998k data, 364k init, 0k highmem)
[ 65.277628] virtual kernel memory layout:
[ 65.277630] fixmap : 0xfff4b000 - 0xfffff000 ( 720 kB)
[ 65.277632] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 65.277634] vmalloc : 0xdf800000 - 0xff7fe000 ( 511 MB)
[ 65.277636] lowmem : 0xc0000000 - 0xdeee0000 ( 494 MB)
[ 65.277638] .init : 0xc041b000 - 0xc0476000 ( 364 kB)
[ 65.277640] .data : 0xc031b5a4 - 0xc0414dc4 ( 998 kB)
[ 65.277641] .text : 0xc0100000 - 0xc031b5a4 (2157 kB)
[ 65.277647] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[ 65.277704] SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
[ 65.357668] Calibrating delay using timer specific routine.. 3201.03 BogoMIPS (lpj=6402072)
[ 65.357710] Security Framework initialized
[ 65.357720] SELinux: Disabled at boot.
[ 65.357744] AppArmor: AppArmor initialized
[ 65.357751] Failure registering capabilities with primary security module.
[ 65.357765] Mount-cache hash table entries: 512
[ 65.357986] CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 00000400 00000000 00000000 00000000
[ 65.358008] CPU: Trace cache: 12K uops, L1 D cache: 8K
[ 65.358013] CPU: L2 cache: 256K
[ 65.358017] CPU: Hyper-Threading is disabled
[ 65.358021] CPU: After all inits, caps: bfebfbff 00000000 00000000 0000b080 00000400 00000000 00000000 00000000
[ 65.358041] Compat vDSO mapped to ffffe000.
[ 65.358063] Checking 'hlt' instruction... OK.
[ 65.374229] SMP alternatives: switching to UP code
[ 65.376755] Freeing SMP alternatives: 11k freed
[ 65.376973] Early unpacking initramfs... done
[ 65.929623] ACPI: Core revision 20070126
[ 65.929718] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
[ 65.985806] CPU0: Intel Mobile Intel(R) Celeron(R) CPU 1.60GHz stepping 07
[ 65.985874] Total of 1 processors activated (3201.03 BogoMIPS).
[ 65.986018] ENABLING IO-APIC IRQs
[ 65.986220] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 66.133152] Brought up 1 CPUs
[ 66.133187] CPU0 attaching sched-domain:
[ 66.133193] domain 0: span 01
[ 66.133197] groups: 01
[ 66.133541] net_namespace: 64 bytes
[ 66.133555] Booting paravirtualized kernel on bare hardware
[ 66.134604] Time: 15:14:24 Date: 06/02/08
[ 66.134653] NET: Registered protocol family 16
[ 66.135096] EISA bus registered
[ 66.135136] ACPI: bus type pci registered
[ 66.137339] PCI: PCI BIOS revision 2.10 entry at 0xfd9a4, last bus=2
[ 66.137343] PCI: Using configuration type 1
[ 66.137346] Setting up standard PCI resources
[ 66.151100] ACPI: EC: Look up EC in DSDT
[ 66.154098] ACPI: Interpreter enabled
[ 66.154106] ACPI: (supports S0 S3 S4 S5)
[ 66.154130] ACPI: Using IOAPIC for interrupt routing
[ 66.166214] ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62
[ 66.166220] ACPI: EC: driver started in poll mode
[ 66.166327] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 66.167120] PCI quirk: region 1000-107f claimed by ICH4 ACPI/GPIO/TCO
[ 66.167127] PCI quirk: region 1180-11bf claimed by ICH4 GPIO
[ 66.167729] PCI: Transparent bridge - 0000:00:1e.0
[ 66.168023] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 66.168376] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
[ 66.178293] ACPI: PCI Interrupt Link [LNKA] (IRQs 10 *11)
[ 66.178445] ACPI: PCI Interrupt Link [LNKB] (IRQs *10 11)
[ 66.178605] ACPI: PCI Interrupt Link [LNKC] (IRQs 10 *11)
[ 66.178755] ACPI: PCI Interrupt Link [LNKD] (IRQs *10 11)
[ 66.178903] ACPI: PCI Interrupt Link [LNKE] (IRQs 11) *0, disabled.
[ 66.179053] ACPI: PCI Interrupt Link [LNKF] (IRQs 10) *0, disabled.
[ 66.179213] ACPI: PCI Interrupt Link [LNKG] (IRQs 11) *0, disabled.
[ 66.179360] ACPI: PCI Interrupt Link [LNKH] (IRQs *10)
[ 66.179650] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 66.179728] pnp: PnP ACPI init
[ 66.179748] ACPI: bus type pnp registered
[ 66.186432] pnp: PnP ACPI: found 8 devices
[ 66.186440] ACPI: ACPI bus type pnp unregistered
[ 66.186447] PnPBIOS: Disabled by ACPI PNP
[ 66.187009] PCI: Using ACPI for IRQ routing
[ 66.187015] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 66.199076] ACPI: EC: non-query interrupt received, switching to interrupt mode
[ 66.209030] NET: Registered protocol family 8
[ 66.209034] NET: Registered protocol family 20
[ 66.209186] AppArmor: AppArmor Filesystem Enabled
[ 66.213007] Time: tsc clocksource has been installed.
[ 66.221108] system 00:04: ioport range 0x200-0x20f has been reserved
[ 66.221114] system 00:04: ioport range 0x600-0x60f has been reserved
[ 66.221118] system 00:04: ioport range 0x700-0x70f has been reserved
[ 66.221122] system 00:04: ioport range 0x800-0x80f has been reserved
[ 66.221127] system 00:04: ioport range 0x1000-0x107f has been reserved
[ 66.221131] system 00:04: ioport range 0x1180-0x11bf has been reserved
[ 66.221135] system 00:04: ioport range 0x1200-0x120f has been reserved
[ 66.221141] system 00:04: ioport range 0xfe00-0xfe01 has been reserved
[ 66.221147] system 00:04: iomem range 0xfebffc00-0xfebfffff has been reserved
[ 66.221152] system 00:04: iomem range 0xfff80000-0xffffffff could not be reserved
[ 66.221156] system 00:04: iomem range 0xfabf8000-0xfabf8fdf has been reserved
[ 66.221161] system 00:04: iomem range 0xfabfa000-0xfabfafdf has been reserved
[ 66.252096] PCI: Bus 3, cardbus bridge: 0000:02:02.0
[ 66.252102] IO window: 00003400-000034ff
[ 66.252108] IO window: 00003800-000038ff
[ 66.252115] PREFETCH window: 34000000-37ffffff
[ 66.252121] MEM window: 38000000-3bffffff
[ 66.252127] PCI: Bus 7, cardbus bridge: 0000:02:04.0
[ 66.252130] IO window: 00003c00-00003cff
[ 66.252136] IO window: 00001400-000014ff
[ 66.252142] PREFETCH window: 3c000000-3fffffff
[ 66.252148] MEM window: 40000000-43ffffff
[ 66.252154] PCI: Bus 11, cardbus bridge: 0000:02:04.1
[ 66.252157] IO window: 00002800-000028ff
[ 66.252163] IO window: 00002c00-00002cff
[ 66.252169] PREFETCH window: 44000000-47ffffff
[ 66.252175] MEM window: 48000000-4bffffff
[ 66.252181] PCI: Bridge: 0000:00:1e.0
[ 66.252185] IO window: 3000-3fff
[ 66.252193] MEM window: e0200000-e02fffff
[ 66.252198] PREFETCH window: disabled.
[ 66.252217] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[ 66.252235] PCI: Enabling device 0000:02:02.0 (0000 -> 0003)
[ 66.252249] ACPI: PCI Interrupt 0000:02:02.0[A] -> GSI 18 (level, low) -> IRQ 16
[ 66.252259] PCI: Setting latency timer of device 0000:02:02.0 to 64
[ 66.252395] ACPI: PCI Interrupt 0000:02:04.0[A] -> GSI 16 (level, low) -> IRQ 17
[ 66.252486] ACPI: PCI Interrupt 0000:02:04.1[B] -> GSI 17 (level, low) -> IRQ 18
[ 66.252515] NET: Registered protocol family 2
[ 66.289089] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 66.289496] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[ 66.289605] TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
[ 66.289730] TCP: Hash tables configured (established 16384 bind 16384)
[ 66.289734] TCP reno registered
[ 66.301223] checking if image is initramfs...<7>Switched to high resolution mode on CPU 0
[ 66.813829] it is
[ 67.385012] Freeing initrd memory: 7665k freed
[ 67.385305] Simple Boot Flag at 0x36 set to 0x1
[ 67.386104] audit: initializing netlink socket (disabled)
[ 67.386125] audit(1212419664.952:1): initialized
[ 67.390130] VFS: Disk quotas dquot_6.5.1
[ 67.390299] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 67.390585] io scheduler noop registered
[ 67.390590] io scheduler anticipatory registered
[ 67.390594] io scheduler deadline registered
[ 67.390620] io scheduler cfq registered (default)
[ 67.390641] Boot video device is 0000:00:02.0
[ 67.391323] isapnp: Scanning for PnP cards...
[ 67.745537] isapnp: No Plug & Play device found
[ 67.845657] Real Time Clock Driver v1.12ac
[ 67.845847] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 67.847299] ACPI: PCI Interrupt 0000:00:1f.6[B] -> GSI 17 (level, low) -> IRQ 18
[ 67.847314] ACPI: PCI interrupt for device 0000:00:1f.6 disabled
[ 67.848722] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 67.848862] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[ 67.849080] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 67.859744] i8042.c: Detected active multiplexing controller, rev 1.1.
[ 67.865127] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 67.865135] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 67.865140] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 67.865144] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 67.865148] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 67.875747] mice: PS/2 mouse device common for all mice
[ 67.876052] EISA: Probing bus 0 at eisa.0
[ 67.876064] Cannot allocate resource for EISA slot 1
[ 67.876069] Cannot allocate resource for EISA slot 2
[ 67.876073] Cannot allocate resource for EISA slot 3
[ 67.876099] EISA: Detected 0 cards.
[ 67.876105] cpuidle: using governor ladder
[ 67.876108] cpuidle: using governor menu
[ 67.876269] NET: Registered protocol family 1
[ 67.876320] Using IPI No-Shortcut mode
[ 67.876376] registered taskstats version 1
[ 67.876558] Magic number: 12:905:233
[ 67.876606] hash matches device ttyv3
[ 67.876734] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 67.876737] EDD information not available.
[ 67.877213] Freeing unused kernel memory: 364k freed
[ 67.911610] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[ 69.328702] fuse init (API version 7.9)
[ 69.376049] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[ 69.376062] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 70.497431] usbcore: registered new interface driver usbfs
[ 70.497473] usbcore: registered new interface driver hub
[ 70.513391] usbcore: registered new device driver usb
[ 70.534473] USB Universal Host Controller Interface driver v3.0
[ 70.534571] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 17
[ 70.534588] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[ 70.534595] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 70.535075] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[ 70.535120] uhci_hcd 0000:00:1d.0: irq 17, io base 0x00001820
[ 70.535368] usb usb1: configuration #1 chosen from 1 choice
[ 70.535417] hub 1-0:1.0: USB hub found
[ 70.535428] hub 1-0:1.0: 2 ports detected
[ 70.635715] SCSI subsystem initialized
[ 70.649987] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
[ 70.650006] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[ 70.650013] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 70.650057] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[ 70.650092] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001840
[ 70.650283] usb usb2: configuration #1 chosen from 1 choice
[ 70.650325] hub 2-0:1.0: USB hub found
[ 70.650336] hub 2-0:1.0: 2 ports detected
[ 70.753291] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 16
[ 70.753311] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[ 70.753318] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 70.753362] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[ 70.753399] uhci_hcd 0000:00:1d.2: irq 16, io base 0x00001860
[ 70.753596] usb usb3: configuration #1 chosen from 1 choice
[ 70.753640] hub 3-0:1.0: USB hub found
[ 70.753651] hub 3-0:1.0: 2 ports detected
[ 70.773196] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[ 70.789852] libata version 3.00 loaded.
[ 70.857447] ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 20
[ 70.857472] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[ 70.857479] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 70.857540] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 4
[ 70.861461] ehci_hcd 0000:00:1d.7: debug port 1
[ 70.861471] PCI: cache line size of 128 is not supported by device 0000:00:1d.7
[ 70.861487] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xe0100000
[ 70.878082] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 70.878294] usb usb4: configuration #1 chosen from 1 choice
[ 70.878341] hub 4-0:1.0: USB hub found
[ 70.878354] hub 4-0:1.0: 6 ports detected
[ 70.981278] 8139cp 0000:02:01.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip
[ 70.981287] 8139cp 0000:02:01.0: Try the "8139too" driver instead.
[ 70.998025] 8139too Fast Ethernet driver 0.9.28
[ 70.998135] ACPI: PCI Interrupt 0000:02:01.0[A] -> GSI 17 (level, low) -> IRQ 18
[ 70.998984] eth0: RealTek RTL8139 at 0x3000, 00:02:3f:8f:04:f0, IRQ 18
[ 70.998991] eth0: Identified 8139 chip type 'RTL-8100B/8139D'
[ 71.013002] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 16
[ 71.013071] PCI: Setting latency timer of device 0000:00:1f.1 to 64
[ 71.013095] ACPI: PCI interrupt for device 0000:00:1f.1 disabled
[ 71.026847] ata_piix 0000:00:1f.1: version 2.12
[ 71.026877] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 16
[ 71.026943] PCI: Setting latency timer of device 0000:00:1f.1 to 64
[ 71.039836] scsi0 : ata_piix
[ 71.054342] scsi1 : ata_piix
[ 71.055208] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1810 irq 14
[ 71.055213] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1818 irq 15
[ 71.217179] ata1.00: ATA-7: SAMSUNG MP0804H, YS200-06, max UDMA/100
[ 71.217186] ata1.00: 156368016 sectors, multi 16: LBA48
[ 71.225122] ata1.00: configured for UDMA/100
[ 71.544771] ata2.00: ATAPI: TOSHIBA ODD-DVD SD-R6372, 1030, max UDMA/33
[ 71.708559] ata2.00: configured for UDMA/33
[ 71.708776] scsi 0:0:0:0: Direct-Access ATA SAMSUNG MP0804H YS20 PQ: 0 ANSI: 5
[ 71.709895] scsi 1:0:0:0: CD-ROM TOSHIBA ODD-DVD SD-R6372 1030 PQ: 0 ANSI: 5
[ 72.132066] Driver 'sd' needs updating - please use bus_type methods
[ 72.132218] sd 0:0:0:0: [sda] 156368016 512-byte hardware sectors (80060 MB)
[ 72.132245] sd 0:0:0:0: [sda] Write Protect is off
[ 72.132250] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 72.132287] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 72.132383] sd 0:0:0:0: [sda] 156368016 512-byte hardware sectors (80060 MB)
[ 72.132406] sd 0:0:0:0: [sda] Write Protect is off
[ 72.132411] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 72.132447] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 72.132455] sda:<4>Driver 'sr' needs updating - please use bus_type methods
[ 72.157024] sda1 sda2 < sda5 >
[ 72.172526] sd 0:0:0:0: [sda] Attached SCSI disk
[ 72.181112] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
[ 72.181121] Uniform CD-ROM driver Revision: 3.20
[ 72.181209] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 72.183142] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 72.183177] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 72.743382] Clocksource tsc unstable (delta = 459025820 ns)
[ 72.747403] Time: acpi_pm clocksource has been installed.
[ 74.835484] ISO 9660 Extensions: Microsoft Joliet Level 3
[ 74.984428] ISO 9660 Extensions: RRIP_1991A
[ 75.367818] Registering unionfs 1.4
[ 75.367825] unionfs: debugging is not enabled
[ 75.389028] loop: module loaded
[ 75.704978] squashfs: version 3.3 (2007/10/31) Phillip Lougher
[ 296.782016] input: PS/2 Mouse as /devices/virtual/input/input2
[ 296.815356] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio4/input/input3
[ 296.959139] iTCO_vendor_support: vendor-support=0
[ 297.090510] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 297.162504] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 297.498085] Linux agpgart interface v0.102
[ 297.668152] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)
[ 297.668289] iTCO_wdt: Found a ICH4-M TCO device (Version=1, TCOBASE=0x1060)
[ 297.668340] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 297.746082] input: PC Speaker as /devices/platform/pcspkr/input/input4
[ 298.053657] agpgart: Detected an Intel 855GM Chipset.
[ 298.053812] agpgart: Detected 16252K stolen memory.
[ 298.065149] agpgart: AGP aperture is 128M @ 0xe8000000
[ 298.139695] parport_pc 00:07: reported by Plug and Play ACPI
[ 298.139728] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP]
[ 298.278603] intel_rng: FWH not detected
[ 298.625269] input: Power Button (FF) as /devices/virtual/input/input5
[ 298.657056] ACPI: Power Button (FF) [PWRF]
[ 298.657163] input: Lid Switch as /devices/virtual/input/input6
[ 298.673151] ACPI: Lid Switch [LID]
[ 298.673256] input: Power Button (CM) as /devices/virtual/input/input7
[ 298.697098] ACPI: Power Button (CM) [PWRB]
[ 299.802552] ACPI: AC Adapter [ACAD] (off-line)
[ 299.838739] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/LNXVIDEO:00/input/input8
[ 299.864056] ACPI: Video Device [GFX0] (multi-head: yes rom: yes post: no)
[ 300.028831] ACPI: Battery Slot [BAT1] (battery present)
[ 300.847146] Yenta: CardBus bridge found at 0000:02:02.0 [12a3:ab01]
[ 300.847173] Yenta: Enabling burst memory read transactions
[ 300.847179] Yenta: Using CSCINT to route CSC interrupts to PCI
[ 300.847183] Yenta: Routing CardBus interrupts to PCI
[ 300.847190] Yenta TI: socket 0000:02:02.0, mfunc 0x01000002, devctl 0x60
[ 301.079543] Yenta: ISA IRQ mask 0x0000, PCI irq 16
[ 301.079551] Socket status: 30000010
[ 301.079555] Yenta: Raising subordinate bus# of parent bus (#02) from #02 to #06
[ 301.079564] pcmcia: parent PCI bridge I/O window: 0x3000 - 0x3fff
[ 301.079570] cs: IO port probe 0x3000-0x3fff: clean.
[ 301.080028] pcmcia: parent PCI bridge Memory window: 0xe0200000 - 0xe02fffff
[ 301.115054] Yenta: CardBus bridge found at 0000:02:04.0 [1179:ff00]
[ 301.115081] Yenta O2: res at 0x94/0xD4: ca/00
[ 301.115085] Yenta O2: enabling read prefetch/write burst
[ 301.243520] Yenta: ISA IRQ mask 0x0c38, PCI irq 17
[ 301.243527] Socket status: 30000006
[ 301.243532] Yenta: Raising subordinate bus# of parent bus (#02) from #06 to #0a
[ 301.243543] pcmcia: parent PCI bridge I/O window: 0x3000 - 0x3fff
[ 301.243548] cs: IO port probe 0x3000-0x3fff: clean.
[ 301.244008] pcmcia: parent PCI bridge Memory window: 0xe0200000 - 0xe02fffff
[ 301.259225] Yenta: CardBus bridge found at 0000:02:04.1 [1179:ff00]
[ 301.387377] Yenta: ISA IRQ mask 0x0c38, PCI irq 18
[ 301.387383] Socket status: 30000006
[ 301.387388] Yenta: Raising subordinate bus# of parent bus (#02) from #0a to #0e
[ 301.387398] pcmcia: parent PCI bridge I/O window: 0x3000 - 0x3fff
[ 301.387404] cs: IO port probe 0x3000-0x3fff: clean.
[ 301.387864] pcmcia: parent PCI bridge Memory window: 0xe0200000 - 0xe02fffff
[ 301.577499] ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 17 (level, low) -> IRQ 18
[ 301.577546] PCI: Setting latency timer of device 0000:00:1f.5 to 64
[ 301.854113] pccard: PCMCIA card inserted into slot 0
[ 301.922027] intel8x0_measure_ac97_clock: measured 55017 usecs
[ 301.922034] intel8x0: clocking to 48000
[ 304.979265] cs: memory probe 0xe0200000-0xe02fffff: excluding 0xe0200000-0xe020ffff
[ 304.987671] pcmcia: registering new device pcmcia0.0
[ 306.025011] orinoco 0.15 (David Gibson <hermes@gibson.dropbear.id.au>, Pavel Roskin <proski@gnu.org>, et al)
[ 306.034573] cs: IO port probe 0x100-0x3af: clean.
[ 306.036460] cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
[ 306.037308] cs: IO port probe 0x820-0x8ff: clean.
[ 306.038016] cs: IO port probe 0xc00-0xcf7: clean.
[ 306.042394] cs: IO port probe 0x100-0x3af: clean.
[ 306.044291] cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
[ 306.045141] cs: IO port probe 0x820-0x8ff: clean.
[ 306.045851] cs: IO port probe 0xc00-0xcf7: clean.
[ 306.046978] cs: IO port probe 0x100-0x3af: clean.
[ 306.048871] cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
[ 306.049722] cs: IO port probe 0x820-0x8ff: clean.
[ 306.052319] cs: IO port probe 0xc00-0xcf7: clean.
[ 306.053341] cs: IO port probe 0xa00-0xaff: clean.
[ 306.055273] cs: IO port probe 0xa00-0xaff: clean.
[ 306.057126] cs: IO port probe 0xa00-0xaff: clean.
[ 306.065329] orinoco_cs 0.15 (David Gibson <hermes@gibson.dropbear.id.au>, Pavel Roskin <proski@gnu.org>, et al)
[ 306.065464] orinoco_cs: GetNextTuple(): No matching CIS configuration. Maybe you need the ignore_cis_vcc=1 parameter.
[ 306.065471] 0.0: GetFirstTuple: No more items
[ 308.034508] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 310.365806] No dock devices found.
[ 316.533582] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
[ 316.533591] apm: overridden by ACPI.
[ 316.942523] lp0: using parport0 (interrupt-driven).
[ 317.070549] ppdev: user-space parallel port driver
[ 324.181382] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[ 324.503012] Bluetooth: Core ver 2.11
[ 324.528054] NET: Registered protocol family 31
[ 324.528064] Bluetooth: HCI device and connection manager initialized
[ 324.528071] Bluetooth: HCI socket layer initialized
[ 324.972843] Bluetooth: L2CAP ver 2.9
[ 324.972851] Bluetooth: L2CAP socket layer initialized
[ 325.214648] Bluetooth: RFCOMM socket layer initialized
[ 325.215764] Bluetooth: RFCOMM TTY layer initialized
[ 325.215774] Bluetooth: RFCOMM ver 1.8
[ 327.939307] NET: Registered protocol family 17
[ 334.942914] NET: Registered protocol family 10
[ 334.944432] lo: Disabled Privacy Extensions
[ 336.034175] [drm] Initialized drm 1.1.0 20060810
[ 336.080354] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 17
[ 336.080369] PCI: Setting latency timer of device 0000:00:02.0 to 64
[ 336.080513] [drm] Initialized i915 1.6.0 20060119 on minor 0
[ 336.080535] PCI: Setting latency timer of device 0000:00:02.1 to 64
[ 336.080625] [drm] Initialized i915 1.6.0 20060119 on minor 1
[ 343.013990] eth0: no IPv6 routers present
[ 458.790643] usb 1-1: new low speed USB device using uhci_hcd and address 2
[ 458.971865] usb 1-1: configuration #1 chosen from 1 choice
[ 463.108799] usbcore: registered new interface driver hiddev
[ 463.152008] input: Microsoft Microsoft USB Wireless Mouse as /devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1:1.0/input/input9
[ 463.174778] input,hidraw0: USB HID v1.11 Mouse [Microsoft Microsoft USB Wireless Mouse] on usb-0000:00:1d.0-1
[ 463.174815] usbcore: registered new interface driver usbhid
[ 463.174822] /build/buildd/linux-2.6.24/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
ubuntu@ubuntu:~$

[stracki123]

ubuntu@ubuntu:~$ lspci -v
00:00.0 Host bridge: Intel Corporation 82852/82855 GM/GME/PM/GMV Processor to I/O Controller (rev 01)
Subsystem: Toshiba America Info Systems Unknown device ff00
Flags: bus master, fast devsel, latency 0
Memory at <unassigned> (32-bit, prefetchable)
Capabilities: <access denied>

00:00.1 System peripheral: Intel Corporation 82852/82855 GM/GME/PM/GMV Processor to I/O Controller (rev 01)
Subsystem: Toshiba America Info Systems Unknown device ff00
Flags: bus master, fast devsel, latency 0

00:00.3 System peripheral: Intel Corporation 82852/82855 GM/GME/PM/GMV Processor to I/O Controller (rev 01)
Subsystem: Toshiba America Info Systems Unknown device ff00
Flags: bus master, fast devsel, latency 0

00:02.0 VGA compatible controller: Intel Corporation 82852/855GM Integrated Graphics Device (rev 01) (prog-if 00 [VGA controller])
Subsystem: Toshiba America Info Systems Unknown device ff00
Flags: bus master, fast devsel, latency 0, IRQ 17
Memory at e8000000 (32-bit, prefetchable) [size=128M]
Memory at e0000000 (32-bit, non-prefetchable) [size=512K]
I/O ports at 1800 [size=8]
Capabilities: <access denied>

00:02.1 Display controller: Intel Corporation 82852/855GM Integrated Graphics Device (rev 01)
Subsystem: Toshiba America Info Systems Unknown device ff00
Flags: bus master, fast devsel, latency 0
Memory at f0000000 (32-bit, prefetchable) [size=128M]
Memory at e0080000 (32-bit, non-prefetchable) [size=512K]
Capabilities: <access denied>

00:1d.0 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 (rev 03) (prog-if 00 [UHCI])
Subsystem: Toshiba America Info Systems Unknown device ff00
Flags: bus master, medium devsel, latency 0, IRQ 17
I/O ports at 1820 [size=32]

00:1d.1 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2 (rev 03) (prog-if 00 [UHCI])
Subsystem: Toshiba America Info Systems Unknown device ff00
Flags: bus master, medium devsel, latency 0, IRQ 19
I/O ports at 1840 [size=32]

00:1d.2 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3 (rev 03) (prog-if 00 [UHCI])
Subsystem: Toshiba America Info Systems Unknown device ff00
Flags: bus master, medium devsel, latency 0, IRQ 16
I/O ports at 1860 [size=32]

00:1d.7 USB Controller: Intel Corporation 82801DB/DBM (ICH4/ICH4-M) USB2 EHCI Controller (rev 03) (prog-if 20 [EHCI])
Subsystem: Toshiba America Info Systems Satellite 2430
Flags: bus master, medium devsel, latency 0, IRQ 20
Memory at e0100000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>

00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 83) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=02, subordinate=0e, sec-latency=64
I/O behind bridge: 00003000-00003fff
Memory behind bridge: e0200000-e02fffff

00:1f.0 ISA bridge: Intel Corporation 82801DBM (ICH4-M) LPC Interface Bridge (rev 03)
Flags: bus master, medium devsel, latency 0

00:1f.1 IDE interface: Intel Corporation 82801DBM (ICH4-M) IDE Controller (rev 03) (prog-if 8a [Master SecP PriP])
Subsystem: Toshiba America Info Systems Unknown device ff00
Flags: bus master, medium devsel, latency 0, IRQ 16
I/O ports at 01f0 [size=8]
I/O ports at 03f4 [size=1]
I/O ports at 0170 [size=8]
I/O ports at 0374 [size=1]
I/O ports at 1810 [size=16]
Memory at 30000000 (32-bit, non-prefetchable) [size=1K]

00:1f.3 SMBus: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) SMBus Controller (rev 03)
Subsystem: Toshiba America Info Systems Unknown device ff00
Flags: medium devsel, IRQ 10
I/O ports at 1500 [size=32]

00:1f.5 Multimedia audio controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller (rev 03)
Subsystem: Toshiba America Info Systems Unknown device ff00
Flags: bus master, medium devsel, latency 0, IRQ 18
I/O ports at 1c00 [size=256]
I/O ports at 18c0 [size=64]
Memory at e0100c00 (32-bit, non-prefetchable) [size=512]
Memory at e0100800 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>

00:1f.6 Modem: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Modem Controller (rev 03) (prog-if 00 [Generic])
Subsystem: Toshiba America Info Systems Unknown device 0001
Flags: medium devsel, IRQ 18
I/O ports at 2400 [size=256]
I/O ports at 2000 [size=128]
Capabilities: <access denied>

02:01.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
Subsystem: Toshiba America Info Systems Unknown device ff00
Flags: bus master, medium devsel, latency 64, IRQ 18
I/O ports at 3000 [size=256]
Memory at e0200000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>

02:02.0 CardBus bridge: Texas Instruments PCI1410 PC card Cardbus Controller (rev 01)
Subsystem: Lucent Technologies Unknown device ab01
Flags: bus master, medium devsel, latency 168, IRQ 16
Memory at e0201000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=02, secondary=03, subordinate=06, sec-latency=176
Memory window 0: 34000000-37fff000 (prefetchable)
Memory window 1: 38000000-3bfff000
I/O window 0: 00003400-000034ff
I/O window 1: 00003800-000038ff
16-bit legacy interface ports at 0001

02:04.0 CardBus bridge: O2 Micro, Inc. OZ6933/711E1 CardBus/SmartCardBus Controller (rev 01)
Subsystem: Toshiba America Info Systems Unknown device ff00
Flags: bus master, stepping, slow devsel, latency 168, IRQ 17
Memory at e0202000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=02, secondary=07, subordinate=0a, sec-latency=176
Memory window 0: 3c000000-3ffff000 (prefetchable)
Memory window 1: 40000000-43fff000
I/O window 0: 00003c00-00003cff
I/O window 1: 00001400-000014ff
16-bit legacy interface ports at 0001

02:04.1 CardBus bridge: O2 Micro, Inc. OZ6933/711E1 CardBus/SmartCardBus Controller (rev 01)
Subsystem: Toshiba America Info Systems Unknown device ff00
Flags: bus master, stepping, slow devsel, latency 168, IRQ 18
Memory at e0203000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=02, secondary=0b, subordinate=0e, sec-latency=176
Memory window 0: 44000000-47fff000 (prefetchable)
Memory window 1: 48000000-4bfff000
I/O window 0: 00002800-000028ff
I/O window 1: 00002c00-00002cff
16-bit legacy interface ports at 0001

ubuntu@ubuntu:~$

[stracki123]

ubuntu@ubuntu:~$ lshw
WARNING: you should run this program as super-user.
ubuntu
description: Computer
width: 32 bits
*-core
description: Motherboard
physical id: 0
*-memory
description: System memory
physical id: 0
size: 494MiB
*-cpu
product: Mobile Intel(R) Celeron(R) CPU 1.60GHz
vendor: Intel Corp.
physical id: 1
bus info: cpu@0
version: 15.2.7
size: 1600MHz
width: 32 bits
capabilities: fpu fpu_exception wp vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe up pebs bts sync_rdtsc cid
configuration: id=0
*-cache
description: L1 cache
physical id: 0
size: 8KiB
*-pci
description: Host bridge
product: 82852/82855 GM/GME/PM/GMV Processor to I/O Controller
vendor: Intel Corporation
physical id: 100
bus info: pci@0000:00:00.0
version: 01
width: 32 bits
clock: 33MHz
configuration: driver=agpgart-intel module=intel_agp
*-system:0 UNCLAIMED
description: System peripheral
product: 82852/82855 GM/GME/PM/GMV Processor to I/O Controller
vendor: Intel Corporation
physical id: 0.1
bus info: pci@0000:00:00.1
version: 01
width: 32 bits
clock: 33MHz
capabilities: bus_master
configuration: latency=0
*-system:1 UNCLAIMED
description: System peripheral
product: 82852/82855 GM/GME/PM/GMV Processor to I/O Controller
vendor: Intel Corporation
physical id: 0.3
bus info: pci@0000:00:00.3
version: 01
width: 32 bits
clock: 33MHz
capabilities: bus_master
configuration: latency=0
*-display:0 UNCLAIMED
description: VGA compatible controller
product: 82852/855GM Integrated Graphics Device
vendor: Intel Corporation
physical id: 2
bus info: pci@0000:00:02.0
version: 01
width: 32 bits
clock: 33MHz
capabilities: vga_controller bus_master cap_list
configuration: latency=0
*-display:1 UNCLAIMED
description: Display controller
product: 82852/855GM Integrated Graphics Device
vendor: Intel Corporation
physical id: 2.1
bus info: pci@0000:00:02.1
version: 01
width: 32 bits
clock: 33MHz
capabilities: bus_master cap_list
configuration: latency=0
*-usb:0
description: USB Controller
product: 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1
vendor: Intel Corporation
physical id: 1d
bus info: pci@0000:00:1d.0
version: 03
width: 32 bits
clock: 33MHz
capabilities: uhci bus_master
configuration: driver=uhci_hcd latency=0 module=uhci_hcd
*-usb:1
description: USB Controller
product: 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2
vendor: Intel Corporation
physical id: 1d.1
bus info: pci@0000:00:1d.1
version: 03
width: 32 bits
clock: 33MHz
capabilities: uhci bus_master
configuration: driver=uhci_hcd latency=0 module=uhci_hcd
*-usb:2
description: USB Controller
product: 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3
vendor: Intel Corporation
physical id: 1d.2
bus info: pci@0000:00:1d.2
version: 03
width: 32 bits
clock: 33MHz
capabilities: uhci bus_master
configuration: driver=uhci_hcd latency=0 module=uhci_hcd
*-usb:3
description: USB Controller
product: 82801DB/DBM (ICH4/ICH4-M) USB2 EHCI Controller
vendor: Intel Corporation
physical id: 1d.7
bus info: pci@0000:00:1d.7
version: 03
width: 32 bits
clock: 33MHz
capabilities: ehci bus_master cap_list
configuration: driver=ehci_hcd latency=0 module=ehci_hcd
*-pci
description: PCI bridge
product: 82801 Mobile PCI Bridge
vendor: Intel Corporation
physical id: 1e
bus info: pci@0000:00:1e.0
version: 83
width: 32 bits
clock: 33MHz
capabilities: pci normal_decode bus_master
*-network
description: Ethernet interface
product: RTL-8139/8139C/8139C+
vendor: Realtek Semiconductor Co., Ltd.
physical id: 1
bus info: pci@0000:02:01.0
logical name: eth0
version: 10
serial: 00:02:3f:8f:04:f0
width: 32 bits
clock: 33MHz
capabilities: bus_master cap_list ethernet physical
configuration: broadcast=yes driver=8139too driverversion=0.9.28 ip=192.168.178.20 latency=64 maxlatency=64 mingnt=32 module=8139too multicast=yes
*-pcmcia:0
description: CardBus bridge
product: PCI1410 PC card Cardbus Controller
vendor: Texas Instruments
physical id: 2
bus info: pci@0000:02:02.0
version: 01
width: 32 bits
clock: 33MHz
capabilities: pcmcia bus_master cap_list
configuration: driver=yenta_cardbus latency=176 maxlatency=5 mingnt=192 module=yenta_socket
*-pcmcia:1
description: CardBus bridge
product: OZ6933/711E1 CardBus/SmartCardBus Controller
vendor: O2 Micro, Inc.
physical id: 4
bus info: pci@0000:02:04.0
version: 01
width: 32 bits
clock: 33MHz
capabilities: pcmcia bus_master cap_list
configuration: driver=yenta_cardbus latency=176 maxlatency=5 mingnt=128 module=yenta_socket
*-pcmcia:2
description: CardBus bridge
product: OZ6933/711E1 CardBus/SmartCardBus Controller
vendor: O2 Micro, Inc.
physical id: 4.1
bus info: pci@0000:02:04.1
version: 01
width: 32 bits
clock: 33MHz
capabilities: pcmcia bus_master cap_list
configuration: driver=yenta_cardbus latency=176 maxlatency=5 mingnt=128 module=yenta_socket
*-isa
description: ISA bridge
product: 82801DBM (ICH4-M) LPC Interface Bridge
vendor: Intel Corporation
physical id: 1f
bus info: pci@0000:00:1f.0
version: 03
width: 32 bits
clock: 33MHz
capabilities: isa bus_master
configuration: latency=0
*-ide
description: IDE interface
product: 82801DBM (ICH4-M) IDE Controller
vendor: Intel Corporation
physical id: 1f.1
bus info: pci@0000:00:1f.1
version: 03
width: 32 bits
clock: 33MHz
capabilities: ide bus_master
configuration: driver=ata_piix latency=0 module=ata_piix
*-serial UNCLAIMED
description: SMBus
product: 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) SMBus Controller
vendor: Intel Corporation
physical id: 1f.3
bus info: pci@0000:00:1f.3
version: 03
width: 32 bits
clock: 33MHz
configuration: latency=0
*-multimedia
description: Multimedia audio controller
product: 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller
vendor: Intel Corporation
physical id: 1f.5
bus info: pci@0000:00:1f.5
version: 03
width: 32 bits
clock: 33MHz
capabilities: bus_master cap_list
configuration: driver=Intel ICH latency=0 module=snd_intel8x0
*-communication UNCLAIMED
description: Modem
product: 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Modem Controller
vendor: Intel Corporation
physical id: 1f.6
bus info: pci@0000:00:1f.6
version: 03
width: 32 bits
clock: 33MHz
capabilities: generic cap_list
configuration: latency=0
ubuntu@ubuntu:~$

[Rain_maker]

[ 301.854113] pccard: PCMCIA card inserted into slot 0
[ 304.987671] pcmcia: registering new device pcmcia0.0
[ 306.025011] orinoco 0.15 (David Gibson <hermes@gibson.dropbear.id.au>, Pavel Roskin <proski@gnu.org>, et al)
[ 306.034573] cs: IO port probe 0x100-0x3af: clean.
[ 306.036460] cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
[ 306.037308] cs: IO port probe 0x820-0x8ff: clean.
[ 306.038016] cs: IO port probe 0xc00-0xcf7: clean.
[ 306.042394] cs: IO port probe 0x100-0x3af: clean.
[ 306.044291] cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
[ 306.045141] cs: IO port probe 0x820-0x8ff: clean.
[ 306.045851] cs: IO port probe 0xc00-0xcf7: clean.
[ 306.046978] cs: IO port probe 0x100-0x3af: clean.
[ 306.048871] cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
[ 306.049722] cs: IO port probe 0x820-0x8ff: clean.
[ 306.052319] cs: IO port probe 0xc00-0xcf7: clean.
[ 306.053341] cs: IO port probe 0xa00-0xaff: clean.
[ 306.055273] cs: IO port probe 0xa00-0xaff: clean.
[ 306.057126] cs: IO port probe 0xa00-0xaff: clean.
[ 306.065329] orinoco_cs 0.15 (David Gibson <hermes@gibson.dropbear.id.au>, Pavel Roskin <proski@gnu.org>, et al)
[ 306.065464] orinoco_cs: GetNextTuple(): No matching CIS configuration. Maybe you need the ignore_cis_vcc=1 parameter.

Ist das wirklich eine "MINI-PCI"-Karte?

Der einzige (wenn auch hauchdünne) Hinweis auf eine WLAN-Karte ist das "orinoco_cs", was sagen eigentlich:



sudo ip a

sudo iwconfig?

Greetz,

RM

[stracki123]

ubuntu@ubuntu:~$ sudo ip a
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast qlen 1000
link/ether 00:02:3f:8f:04:f0 brd ff:ff:ff:ff:ff:ff
inet 192.168.178.20/24 brd 192.168.178.255 scope global eth0
inet6 fe80::202:3fff:fe8f:4f0/64 scope link
valid_lft forever preferred_lft forever
ubuntu@ubuntu:~$
ubuntu@ubuntu:~$
ubuntu@ubuntu:~$ sudo iwconfig
lo no wireless extensions.

eth0 no wireless extensions.

ubuntu@ubuntu:~$



Ist das wirklich eine "MINI-PCI"-Karte?

Ich denke doch, behauptet Windows zumindest.
Außerdem ist es ja eine interne Karte, oder gibt es da auch noch Unterschiede.
Ich dachte immer das sind alles Mini-PCI
Im übrigen das Suse von damals war glaube ich 9.0.

Gruß

Jürgen

[stracki123]

Hallo,
ich habe das Notebook mal aufgeschraubt :D:D:D:D
es handelt sich um eine Agere/Lucent ORiNOCO 802.11b Wireless LAN Mini PCI
model MPC13A-20/R.
Leider habe ich bis jetzt noch keinen Treiber gefunden.
Agere wurde wohl aufgekauft, Treiber gibt es da nicht mehr.
Falls jemand eine Idee zwecks Suche hat wäre ich sehr dankbar.

Gruß

Jürgen

[Newbie314]

Chipsatz ergooglen und danach suchen .. vielleicht passt ein anderer Treiber .... ?

[corax2.05]

laut der seite hier sollte der treiber im kernel enthalten sein.
http://www.nongnu.org/orinoco/

[zeromancer1972]

Mal im Paketmanager von Ubuntu nach "orinoco" gesucht? Bin mir fast sicher, dass dieses Teil unterstützt wird - wenn auch evtl. nur vom "restricted" System.

BTW: coole Thread-Bezeichnung :D

Wenn es sich nicht "Ubuntuisieren" lässt, warum dann nicht mal mit "Susesieren" versuchen? ;)

[stracki123]

Mal im Paketmanager von Ubuntu nach "orinoco" gesucht? Bin mir fast sicher, dass dieses Teil unterstützt wird - wenn auch evtl. nur vom "restricted" System.

BTW: coole Thread-Bezeichnung :D

Wenn es sich nicht "Ubuntuisieren" lässt, warum dann nicht mal mit "Susesieren" versuchen? ;)

Wie auch immer, "Linuxisieren" auf jeden Fall.:rolleyes:
Nachdem ich vor nicht allzu langer Zeit Windows "neu" gemacht habe :ugly:, läuft der Rechner mittlerweile nach meinem subjektiven Empfinden rückwärts.

Gruß

Jürgen

[zeromancer1972]

Wie auch immer, "Linuxisieren" auf jeden Fall.:rolleyes:
Nachdem ich vor nicht allzu langer Zeit Windows "neu" gemacht habe :ugly:, läuft der Rechner mittlerweile nach meinem subjektiven Empfinden rückwärts.

Gruß

Jürgen

Herrlich diese Ausdrucksweise :D
Tja wie gesagt, such einfach mal, vlt. auch im Ubuntu-Forum (http://ubuntuusers.de/). Viel Erfolg jedenfalls von mir (der auch sein altes Schätzchen Satellite 2410 erfolgreich "ubuntuisiert" hat)

[stracki123]

So,
Ubuntu ist drauf auf der alten Dame.
Wlan wurde wie zu erwarten nicht eingerichtet.
Was mich erstaunt ist dies:
tistr@tistr:~$ lsmod
Module Size Used by
ipv6 267780 8
af_packet 23812 2
i915 32512 2
drm 82580 3 i915
rfcomm 41744 2
l2cap 25728 13 rfcomm
bluetooth 61156 4 rfcomm,l2cap
ppdev 10372 0
speedstep_lib 6532 0
cpufreq_stats 7104 0
cpufreq_conservative 8712 0
cpufreq_userspace 5284 0
cpufreq_powersave 2688 0
cpufreq_ondemand 9740 0
freq_table 5536 2 cpufreq_stats,cpufreq_ondemand
sbs 15112 0
sbshc 7680 1 sbs
dock 11280 0
iptable_filter 3840 0
ip_tables 14820 1 iptable_filter
x_tables 16132 1 ip_tables
lp 12324 0
orinoco_cs 16396 0
orinoco 42772 1 orinoco_cs
hermes 8448 2 orinoco_cs,orinoco
joydev 13120 0
pcmcia 40876 1 orinoco_cs
snd_intel8x0 35356 3
snd_ac97_codec 101028 1 snd_intel8x0
ac97_bus 3072 1 snd_ac97_codec
snd_pcm_oss 42144 0
snd_mixer_oss 17920 1 snd_pcm_oss
parport_pc 36260 1
snd_pcm 78596 3 snd_intel8x0,snd_ac97_codec,snd_pcm_oss
parport 37832 3 ppdev,lp,parport_pc
evdev 13056 6
pcspkr 4224 0
snd_seq_dummy 4868 0
serio_raw 7940 0
psmouse 40336 0
snd_seq_oss 35584 0
battery 14212 0
snd_seq_midi 9376 0
snd_rawmidi 25760 1 snd_seq_midi
snd_seq_midi_event 8320 2 snd_seq_oss,snd_seq_midi
container 5632 0
snd_seq 54224 6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_mid i_event
ac 6916 0
video 19856 0
output 4736 1 video
yenta_socket 27276 5
rsrc_nonstatic 13696 1 yenta_socket
pcmcia_core 40596 4 orinoco_cs,pcmcia,yenta_socket,rsrc_nonstatic
snd_timer 24836 2 snd_pcm,snd_seq
snd_seq_device 9612 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi ,snd_seq
snd 56996 17 snd_intel8x0,snd_ac97_codec,snd_pcm_oss,snd_mixer_ oss,snd_pcm,snd_seq_dummy,snd_seq_oss,snd_rawmidi, snd_seq,snd_timer,snd_seq_device
soundcore 8800 1 snd
snd_page_alloc 11400 2 snd_intel8x0,snd_pcm
button 9232 0
iTCO_wdt 13092 0
iTCO_vendor_support 4868 1 iTCO_wdt
shpchp 34452 0
pci_hotplug 30880 1 shpchp
intel_agp 25492 1
agpgart 34760 3 drm,intel_agp
ext3 136712 1
jbd 48404 1 ext3
mbcache 9600 1 ext3
sg 36880 0
sr_mod 17956 0
cdrom 37408 1 sr_mod
sd_mod 30720 3
usbhid 31872 0
hid 38784 1 usbhid
ata_piix 19588 2
pata_acpi 8320 0
8139cp 24704 0
ata_generic 8324 0
8139too 27520 0
mii 6400 2 8139cp,8139too
libata 159344 3 ata_piix,pata_acpi,ata_generic
ehci_hcd 37900 0
uhci_hcd 27024 0
scsi_mod 151436 4 sg,sr_mod,sd_mod,libata
usbcore 146028 4 usbhid,ehci_hcd,uhci_hcd
thermal 16796 0
processor 36872 2 thermal
fan 5636 0
fbcon 42912 0
tileblit 3456 1 fbcon
font 9472 1 fbcon
bitblit 6784 1 fbcon
softcursor 3072 1 bitblit
fuse 50580 3
tistr@tistr:~$

wenn ich das mit meinem rudimentären Grundwissen richtig deute, sind die Module da:confused::confused:

gruß

Jürgen

[koepie]

hast du es schon mal mit ndiswrapper versucht?
damit kannst du einfach den windows treiber benutzen.

[corax2.05]

die module sind ja geladen, eigentlich sollte es nur noch an der einrichtung der verbindung und verschlüsselung liegen.
ggf. muß noch eine firmware an die richtige stelle kopiert werden, meistens /lib/firmware.

[stracki123]

die module sind ja geladen, eigentlich sollte es nur noch an der einrichtung der verbindung und verschlüsselung liegen.
ggf. muß noch eine firmware an die richtige stelle kopiert werden, meistens /lib/firmware.

O.K.

Wie :confused::confused::confused: