PDA

Archiv verlassen und diese Seite im Standarddesign anzeigen : ADS,RH5,LDAP-Anmeldung schlägt durch Xsession fehl



fs-project
13.03.08, 17:41
Hallo,

Ich betreibe hier ein kleines Testnetz in dem ein DC mit einer ADS läuft und einem Red Hat 5 Enterprise Server, der seine Anmeldedaten aus der ADS ziehen soll.
Alles schön und gut, also LDAP eingerichtet(mit den Standard Client-files aus der Installation), system-auth so eingerichtet das er ein Homeverzeichnis erstellt und mit dem (Standard-)Inhalt aus etc/skel/ füllt. Soweit funktioniert alles. Er holt sich die Daten aus dem LDAP Verzeichnis, legt das home an, und versucht xserver und anschließend KDE zustarten. Allerdings kommt ziemlich direkt nach der Meldung das /Home/xx/ erstellt wurde und der Anmeldescreen verschwunden ist eine FEhlermeldung.

Sie sagt:

Ihre Sitzung dauerte lediglich weniger als 10 Sekunden.[...]Versuchen sie mit einer abgesicherten Sitzung das Problem zubeheben.(Detailanzeigen bringt einen Ausschnitt aus der ~/xsession-errors der besagt:
"localuser:max.mustermann being added to acces control list
Es konnte kein Profil für Benutzer >>max.mustermann<< gefunden werden.
/etc/X11/xinit/Xsession: line 90(einige male zuvor wars noch line 89): /usr/bin/ssh-agent /usr/bin/dbus-launch --exit-with-session /etc/X11/xinit/Xclients: Datei oder Verzeichniss nicht gefunden
/etc/X11/xinit/Xsession: line 90(einige male zuvor wars noch line 89): exec: /usr/bin/ssh-agent /usr/bin/dbus-launch --exit-with-session /etc/X11/xinit/Xclients: cannot execute: Datei oder Verzeichniss nicht gefunden"
man sagt ok und landet wieder im Anmeldebildschirm.

Nun wie die Meldung empfohlen habe ich mich mit max.mustermann in einer
gesicherten Anmeldung eingeloggt, funktioniert, startx ausgeführt --> Meldung: läuft schon, startkde ausgeführt --> KDE startet und alles ist toll

Ich habe auch schon die Rechte für beide Dateien geprüft und auf: alle dürfen schreiben,lesen,ausführen gesetzt. Auch kann ich die beiden Dateien in der abgesicherten shell ausführen.

Auch wenn ich mich per ssh auf dem Server einwähle und mich mit einem frisch angelegten user anmelde sagt er mir brav home.. wurde angelegt und wächselt in die vordefinierte shell.

Was mich allerdings doch sehr verwundert, ich habe aus Linux mit aktivierung von LDAP ein Single User System gemacht, ist das normal?
Im weitern kann ich nirgends im Homeverzeichnis des jeweiligen Users einen .xsession-error finden!?

Nun noch meine Configs:

#%PAM-1.0
# This file is auto-generated.
# User changes will be destroyed the next time authconfig is run.
auth required pam_env.so
auth sufficient pam_unix.so nullok try_first_pass
auth requisite pam_succeed_if.so uid >= 500 quiet
auth sufficient pam_ldap.so use_first_pass
auth required pam_deny.so

account required pam_unix.so broken_shadow
account sufficient pam_succeed_if.so uid < 500 quiet
account [default=bad success=ok user_unknown=ignore] pam_ldap.so
account required pam_permit.so

password requisite pam_cracklib.so try_first_pass retry=3
password sufficient pam_unix.so md5 shadow nullok try_first_pass use_authtok
password sufficient pam_ldap.so use_authtok
password required pam_deny.so

session required /lib/security/pam_mkhomedir.so skel=/etc/skel/ umask=0077
session optional pam_keyinit.so revoke
session required pam_limits.so
session [success=1 default=ignore] pam_succeed_if.so service in crond quiet use_uid
session required pam_unix.so
session optional pam_ldap.so


#
# /etc/nsswitch.conf
#
# An example Name Service Switch config file. This file should be
# sorted with the most-used services at the beginning.
#
# The entry '[NOTFOUND=return]' means that the search for an
# entry should stop if the search in the previous entry turned
# up nothing. Note that if the search failed due to some other reason
# (like no NIS server responding) then the search continues with the
# next entry.
#
# Legal entries are:
#
# nisplus or nis+ Use NIS+ (NIS version 3)
# nis or yp Use NIS (NIS version 2), also called YP
# dns Use DNS (Domain Name Service)
# files Use the local files
# db Use the local database (.db) files
# compat Use NIS on compat mode
# hesiod Use Hesiod for user lookups
# [NOTFOUND=return] Stop searching if not found so far
#

# To use db, put the "db" in front of "files" for entries you want to be
# looked up first in the databases
#
# Example:
#passwd: db files nisplus nis
#shadow: db files nisplus nis
#group: db files nisplus nis

passwd: files ldap
shadow: files ldap
group: files ldap

#hosts: db files nisplus nis dns
hosts: files dns

# Example - obey only what nisplus tells us...
#services: nisplus [NOTFOUND=return] files
#networks: nisplus [NOTFOUND=return] files
#protocols: nisplus [NOTFOUND=return] files
#rpc: nisplus [NOTFOUND=return] files
#ethers: nisplus [NOTFOUND=return] files
#netmasks: nisplus [NOTFOUND=return] files

bootparams: nisplus [NOTFOUND=return] files

ethers: files
netmasks: files
networks: files
protocols: files ldap
rpc: files
services: files ldap

netgroup: files ldap

publickey: nisplus

automount: files ldap
aliases: files nisplus




# @(#)$Id: ldap.conf,v 1.38 2006/05/15 08:13:31 lukeh Exp $
#
# This is the configuration file for the LDAP nameservice
# switch library and the LDAP PAM module.
#
# The man pages for this file are nss_ldap(5) and pam_ldap(5)
#
# PADL Software
# http://www.padl.com
#

# Your LDAP server. Must be resolvable without using LDAP.
# Multiple hosts may be specified, each separated by a
# space. How long nss_ldap takes to failover depends on
# whether your LDAP client library supports configurable
# network or connect timeouts (see bind_timelimit).
host s-dc01

# The distinguished name of the search base.
base CN=Users,DC=TESTADS,DC=local

# Another way to specify your LDAP server is to provide an
# uri with the server name. This allows to use
# Unix Domain Sockets to connect to a local LDAP Server.
#uri ldap://127.0.0.1/
#uri ldaps://127.0.0.1/
#uri ldapi://%2fvar%2frun%2fldapi_sock/
# Note: %2f encodes the '/' used as directory separator

# The LDAP version to use (defaults to 3
# if supported by client library)
ldap_version 3

#sasl start_tls

# The distinguished name to bind to the server with.
# Optional: default is to bind anonymously.
binddn ldapuser@TESTADS.local

# The credentials to bind with.
# Optional: default is no credential.
bindpw a.b.1234

# The distinguished name to bind to the server with
# if the effective user ID is root. Password is
# stored in /etc/ldap.secret (mode 600)
rootbinddn cn=ldapuser,dc=TESTADS,dc=local

# The port.
# Optional: default is 389.
port 389

# The s#earch scope.
scope sub
#scope one
#scope base

# Search timelimit
#timelimit 30
timelimit 120

# Bind/connect timelimit
#bind_timelimit 30
bind_timelimit 120

# Reconnect policy: hard (default) will retry connecting to
# th
[roote software with exponential backoff, soft will fail
# immediately.
bind_policy soft

# Idle timelimit; client will close connections
# (nss_ldap only) if the server has not been contacted
# for the number of seconds specified below.
#idle_timelimit 3600
idle_timelimit 360

# Filter to AND with uid=%s
#pam_filter objectclass=account

# The user ID attribute (defaults to uid)
#pam_login_attribute uid

# Search the root DSE for the password policy (works
# with Netscape Directory Server)
#pam_lookup_policy yes

# Check the 'host' attribute for access control
# Default is no; if set to yes, and user has no
# value for the host attribute, and pam_ldap is
# configured for account management (authorization)
# then the user will not be allowed to login.
#pam_check_host_attr yes

# Check the 'authorizedService' attribute for access
# control
# Default is no; if set to yes, and the user has no
# value for the authorizedService attribute, and
# pam_ldap is configured for account management
# (authorization) then the user will not be allowed
# to login.
#pam_check_service_attr yes

# Group to enforce membership of
#pam_groupdn cn=PAM,ou=Groups,dc=example,dc=com

# Group member attribute
#pam_member_attribute uniquemember

# Specify a minium or maximum UID number allowed
#pam_min_uid 0
#pam_max_uid 0

# Template login attribute, default template user
# (can be overriden by value of former attribute
# in user's entry)
#pam_login_attribute userPrincipalName
#pam_template_login_attribute uid
#pam_template_login nobody

# HEADS UP: the pam_crypt, pam_nds_passwd,
# and pam_ad_passwd options are no
# longer supported.
#
# Do not hash the password at all; presume
# the directory server will do it, if
# necessary. This is the default.
#pam_password clear

# Hash password locally; required for University of
# Michigan LDAP server, and works with Netscape
# Directory Server if you're using the UNIX-Crypt
# hash mechanism and not using the NT Synchronization
# service.
#pam_password crypt

# Remove old password first, then update in
# cleartext. Necessary for use with Novell
# Directory Services (NDS)
#pam_password clear_remove_old
#pam_password nds

# RACF is an alias for the above. For use with
# IBM RACF
#pam_password racf

# Update Active Directory password, by
# creating Unicode password and updating
# unicodePwd attribute.
#pam_password ad

# Use the OpenLDAP password change
# extended operation to update the password.
#pam_password exop

# Redirect users to a URL or somesuch on password
# changes.
#pam_password_prohibit_message Please visit http://internal to change your password.

# RFC2307bis naming contexts
# Syntax:
# nss_base_XXX base?scope?filter
# where scope is {base,one,sub}
# and filt

er is a filter to be &'d with the
# default filter.
# You can omit the suffix eg:
# nss_base_passwd ou=People,
# to append the default base DN but this
# may incur a small performance impact.
#nss_base_passwd ou=People,dc=example,dc=com?one
#nss_base_shadow ou=People,dc=example,dc=com?one
#nss_base_group ou=Group,dc=example,dc=com?one
#nss_base_hosts ou=Hosts,dc=example,dc=com?one
#nss_base_services ou=Services,dc=example,dc=com?one
#nss_base_networks ou=Networks,dc=example,dc=com?one
#nss_base_protocols ou=Protocols,dc=example,dc=com?one
#nss_base_rpc ou=Rpc,dc=example,dc=com?one
#nss_base_ethers ou=Ethers,dc=example,dc=com?one
#nss_base_netmasks ou=Networks,dc=example,dc=com?ne
#nss_base_bootparams ou=Ethers,dc=example,dc=com?one
#nss_base_aliases ou=Aliases,dc=example,dc=com?one
#nss_base_netgroup ou=Netgroup,dc=example,dc=com?one

# Just assume that there are no supplemental groups for these named users
#nss_initgroups_ignoreusers root,ldap,named,avahi,haldaemon

# attribute/objectclass mapping
# Syntax:
#nss_map_attribute rfc2307attribute mapped_attribute
#nss_map_objectclass rfc2ksysguarddrc307objectclass mapped_objectclass

# configure --enable-nds is no longer supported.
# NDS mappings
#nss_map_attribute uniqueMember member
#ksysguarddrc


# Services for UNIX 3.5 mappings
nss_map_objectclass posixAccount User
nss_map_objectclass shadowAccount User
nss_map_attribute uid msSFU30Name
nss_map_attribute uniqueMember msSFU30PosixMember
nss_map_attribute userPassword msSFU30Password
nss_map_attribute homeDirectory msSFU30HomeDirectory
#nss_map_attribute homeDirectory msSFUHomeDirectory
nss_map_objectclass posixGroup Group
pam_login_attribute msSFU30Name
pam_filter objectclass=User
#pam_password ad

# configure --enable-mssfu-schema is no longer supported.
# Services for UNIX 2.0 mappings
#nss_map_objectclass posixAccount User
#nss_map_objectclass shadowAccount user
#nss_map_attribute uid msSFUName
#nss_map_attribute uniqueMember posixMember
#nss_map_attribute userPassword msSFUPassword
#nss_map_attribute homeDirectory msSFUHomeDirectory
#nss_map_attribute shadowLastChange pwdLastSet
#nss_map_objectclass posixGroup Group
#nss_map_attribute cn msSFUName
#pam_login_attribute msSFUName
#pam_filter objectclass=User
#pam_password ad

# RFC 2307 (AD) mappings
#nss_map_objectclass posixAccount user
#nss_map_objectclass shadowAccount user
#nss_map_attribute uid sAMAccountName
#nss_map_attribute homeDirectory unixHomeDirectory
#nss_map_attribute shadowLastChange pwdLastSet
#nss_map_objectclass posixGroup group
#nss_map_attribute uniqueMember member
#pam_login_attribute sAMAccountName
#pam_filter objectclass=User
#pam_password ad

# configure --enable-authpassword is no longer supported
# AuthPassword mappings
#nss_map_attribute userPassword authPassword

# AIX SecureWay mappings
#nss_map_objectclass posixAccount aixAccount
#nss_base_passwd ou=aixaccount,?one
nss_map_attribute uid msSFU30Name
nss_map_attribute gidNumber msSFU30GidNumber
nss_map_attribute uidNumber msSFU30UidNumber
#nss_map_attribute userPassword passwordChar
#nss_map_objectclass posixGroup aixAccessGroup
#nss_base_group ou=aixgroup,?one
#nss_map_attribute cn groupName
#nss_map_attribute uniqueMember member
#pam_login_attribute userName
#pam_filter objectclass=aixAccount
#pam_password clear

# Netscape SDK LDAPS
#ssl on

# Netscape SDK SSL options
#sslpath /etc/ssl/certs

# OpenLDAP SSL mechanism
# start_tls mechanism uses the normal LDAP port, LDAPS typically 636
#ssl start_tls
#ssl on

# OpenLDAP SSL options
# Require and verify server certificate (yes/no)
# Default is to use libldap's default behavior, which can be configured in
# /etc/openldap/ldap.conf using the TLS_REQCERT setting. The default for
# OpenLDAP 2.0 and earlier is "no", for 2.1 and later is "yes".
#tls_checkpeer yes

# CA certificates for server certificate verification
# At least one of these are required if tls_checkpeer is "yes"
#tls_cacertfile /etc/ssl/ca.cert
#tls_cacertdir /etc/ssl/certs

# Seed the PRNG if /dev/urandom is not provided
#tls_randfile /var/run/egd-pool

# SSL cipher suite
# See man ciphers for syntax
#tls_ciphers TLSv1

# Client certificate and key
# Use these, if your server requires client authentication.
#tls_cert
#tls_key

# Disable SASL security layers. This is needed for AD.
#sasl_secprops maxssf=0

# Override the default Kerberos ticket cache location.
#krb5_ccname FILE:/etc/.ldapcache

# SASL mechanism for PAM authentication - use is experimental
# at present and does not support password policy control
#pam_sasl_mech DIGEST-MD5
uri ldap://192.168.1.1/
ssl no
tls_cacertdir /etc/openldap/cacerts
#pam_password md5


Nun ich hoffe mir kann jemand dabei helfen :)

Danke, mit freundlichen Grüßen
Flo

MiGo
13.03.08, 21:09
/etc/X11/xinit/Xsession: line 90: /usr/bin/ssh-agent: Datei oder Verzeichniss nicht gefunden
Dir fehlt ssh-agent (oder das Programm ist an einer anderen Stelle).
ssh-agent sollte sich im Paket "openssh-clients" befinden.

fs-project
13.03.08, 22:10
wenns so einfach wäre :( beide sind da und können auch von dem user ausgeführt,gelesen,bearbeitet werden.
Habe noch eine andere interessante Entdeckung mit einem Netzwerk sniffer gemacht: der gdm versucht einen bind auszuführen, aber das nicht mit dem "ldapuser" sondern mit dem max.mustermann also mit dem aus ldap geholten. Wieso macht der das? und wie kann ich dem sagen: "NEHM DEN LDAPUSER!!"?:ugly:

fs-project
16.03.08, 12:05
hm, hat denn keiner noch eine Idee? Ist echt wichtig meine Praxisarbeit hängt daran :(

fs-project
25.03.08, 09:04
Nagut,
Ich habe jetzt einen "Workaround"...es wird nun bei uns so werden das standardmäßig keine grafische Oberfläche vorhanden ist und man sie dann per Hand aufruft. DasProblem scheint auch durch die Displayvariable aufzutreten, wahrscheinlich ist das Display ,auf das der Login geschickt wird, schon in Benutzung von irgendwas...Also wenn mann KDE manuell auf Display 9 lädt geht alles wunderbar...

naja trotzdem Danke.

Nun werde ich mich mal an die Radius Authentifizierung ranmachen, falls jemand gute Howtos zum Thema Radiusclients auf Linux wäre ich für Links sehr Dankbar ;)