elvnox
19.02.08, 18:32
Hallo an euch alle - ich habe SuSE 10.3 und mir (schon vor längerer Zeit) per Smart KDE 4 installiert jedoch ist das System sehr langsam - ich vermute mal das wegen falschen einstellungen in der Xorg.conf kde 4 die 3d beschleunigung nicht nutzen kann nur weiß ich leiede nicht welche Module bzw. einstellungen ich dafür ändern könnte?
Mein 3D System funktioniert eigentlich sehr gut ich nutze es sogar unter wine zum spielen von 3D Spielen (zB Anno 1503)
Mein System:
Intel Core3Duo E6600
2GB Ram
ASUS P5LD2
ATI Radeon X1950Pro PCIex 512MB
meine Xorg.conf:
# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf(5) manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "Files"
FontPath "/usr/share/fonts/X11/misc"
FontPath "/usr/share/fonts/X11/cyrillic"
FontPath "/usr/share/fonts/X11/100dpi/:unscaled"
FontPath "/usr/share/fonts/X11/75dpi/:unscaled"
FontPath "/usr/share/fonts/X11/Type1"
FontPath "/usr/share/fonts/X11/100dpi"
FontPath "/usr/share/fonts/X11/75dpi"
# path to defoma fonts
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection
Section "Module"
Load "dbe" # Double buffer extension
SubSection "extmod"
Option "omit xfree86-dga" # don't initialise the DGA extension
EndSubSection
Load "type1"
Load "speedo"
Load "freetype"
# Load "xtt"
Load "glx"
Load "dri"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
option "CoreKeyboard"
option "XkbRules" "xorg"
option "XkbModel" "pc105"
option "XkbLayout" "de"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
option "CorePointer"
option "Device" "/dev/input/mice"
option "Protocol" "ImPS/2"
option "ZAxisMapping" "4 5"
option "Emulate3Buttons" "true"
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "stylus"
option "Device" "/dev/input/wacom"
option "Type" "stylus"
option "ForceDevice" "ISDV4"# Tablet PC ONLY
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "eraser"
option "Device" "/dev/input/wacom"
option "Type" "eraser"
option "ForceDevice" "ISDV4"# Tablet PC ONLY
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "cursor"
option "Device" "/dev/input/wacom"
option "Type" "cursor"
option "ForceDevice" "ISDV4"# Tablet PC ONLY
EndSection
Section "Device"
identifier "Standardgrafikkarte"
boardname "ati"
busid "PCI:4:0:0"
driver "fglrx"
screen 0
EndSection
Section "Monitor"
identifier "PHILIPS 109S"
vendorname "Plug 'n' Play"
modelname "Plug 'n' Play"
modeline "1280x1024@85" 25.2 640 656 752 800 480 490 492 525 -vsync -hsync
gamma 1.0
EndSection
Section "Screen"
Identifier "Default Screen"
Device "Standardgrafikkarte"
Monitor "PHILIPS 109S"
DefaultDepth 24
SubSection "Display"
depth 24
virtual 640 480
modes "1280x1024@85"
EndSubSection
EndSection
Section "ServerLayout"
Identifier "Default Layout"
screen 0 "Default Screen" 0 0
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
InputDevice "stylus" "SendCoreEvents"
InputDevice "cursor" "SendCoreEvents"
InputDevice "eraser" "SendCoreEvents"
EndSection
Section "DRI"
Mode 0666
EndSection
Section "Extensions"
option "Composite" "Disable"
EndSection
Section "device" #
identifier "device1"
boardname "VESA driver (generic)"
busid "PCI:4:0:1"
driver "vesa"
screen 0
EndSection
Section "screen" #
identifier "screen1"
device "device1"
defaultdepth 24
monitor "monitor1"
EndSection
Section "monitor" #
identifier "monitor1"
gamma 1.0
EndSection
Section "ServerFlags"
EndSection
Mein 3D System funktioniert eigentlich sehr gut ich nutze es sogar unter wine zum spielen von 3D Spielen (zB Anno 1503)
Mein System:
Intel Core3Duo E6600
2GB Ram
ASUS P5LD2
ATI Radeon X1950Pro PCIex 512MB
meine Xorg.conf:
# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf(5) manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "Files"
FontPath "/usr/share/fonts/X11/misc"
FontPath "/usr/share/fonts/X11/cyrillic"
FontPath "/usr/share/fonts/X11/100dpi/:unscaled"
FontPath "/usr/share/fonts/X11/75dpi/:unscaled"
FontPath "/usr/share/fonts/X11/Type1"
FontPath "/usr/share/fonts/X11/100dpi"
FontPath "/usr/share/fonts/X11/75dpi"
# path to defoma fonts
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection
Section "Module"
Load "dbe" # Double buffer extension
SubSection "extmod"
Option "omit xfree86-dga" # don't initialise the DGA extension
EndSubSection
Load "type1"
Load "speedo"
Load "freetype"
# Load "xtt"
Load "glx"
Load "dri"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
option "CoreKeyboard"
option "XkbRules" "xorg"
option "XkbModel" "pc105"
option "XkbLayout" "de"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
option "CorePointer"
option "Device" "/dev/input/mice"
option "Protocol" "ImPS/2"
option "ZAxisMapping" "4 5"
option "Emulate3Buttons" "true"
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "stylus"
option "Device" "/dev/input/wacom"
option "Type" "stylus"
option "ForceDevice" "ISDV4"# Tablet PC ONLY
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "eraser"
option "Device" "/dev/input/wacom"
option "Type" "eraser"
option "ForceDevice" "ISDV4"# Tablet PC ONLY
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "cursor"
option "Device" "/dev/input/wacom"
option "Type" "cursor"
option "ForceDevice" "ISDV4"# Tablet PC ONLY
EndSection
Section "Device"
identifier "Standardgrafikkarte"
boardname "ati"
busid "PCI:4:0:0"
driver "fglrx"
screen 0
EndSection
Section "Monitor"
identifier "PHILIPS 109S"
vendorname "Plug 'n' Play"
modelname "Plug 'n' Play"
modeline "1280x1024@85" 25.2 640 656 752 800 480 490 492 525 -vsync -hsync
gamma 1.0
EndSection
Section "Screen"
Identifier "Default Screen"
Device "Standardgrafikkarte"
Monitor "PHILIPS 109S"
DefaultDepth 24
SubSection "Display"
depth 24
virtual 640 480
modes "1280x1024@85"
EndSubSection
EndSection
Section "ServerLayout"
Identifier "Default Layout"
screen 0 "Default Screen" 0 0
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
InputDevice "stylus" "SendCoreEvents"
InputDevice "cursor" "SendCoreEvents"
InputDevice "eraser" "SendCoreEvents"
EndSection
Section "DRI"
Mode 0666
EndSection
Section "Extensions"
option "Composite" "Disable"
EndSection
Section "device" #
identifier "device1"
boardname "VESA driver (generic)"
busid "PCI:4:0:1"
driver "vesa"
screen 0
EndSection
Section "screen" #
identifier "screen1"
device "device1"
defaultdepth 24
monitor "monitor1"
EndSection
Section "monitor" #
identifier "monitor1"
gamma 1.0
EndSection
Section "ServerFlags"
EndSection