dm4im
03.01.08, 13:01
Hallo,
habe auf einem Laptop von openSuse 10.2 zu 10.3 upgegradet, jetzt will die Soundkarte nicht mehr. Die Ausgabe von dmesg (gekürzt)
PCI: Using IRQ router PIIX/ICH [8086/7110] at 0000:00:05.0
PCI: setting IRQ 11 as level-triggered
PCI: Found IRQ 11 for device 0000:00:0b.0
PCI: Sharing IRQ 11 with 0000:01:00.0
PCI: Found IRQ 11 for device 0000:00:0b.1
PCI: Sharing IRQ 11 with 0000:00:0c.0
ACPI Exception (utmutex-0263): AE_BAD_PARAMETER, Thread CFFCEAB0 could not acquire Mutex [3] [20070126]
ACPI: RTC can wake from S4
pnp: 00:01: iomem range 0x0-0x9ffff could not be reserved
pnp: 00:01: iomem range 0x0-0x0 could not be reserved
pnp: 00:01: iomem range 0xe8000-0xebfff could not be reserved
pnp: 00:01: iomem range 0xf0000-0xfffff could not be reserved
Time: tsc clocksource has been installed.
PCI: Bridge: 0000:00:01.0
IO window: disabled.
MEM window: f0000000-f7ffffff
PREFETCH window: 30000000-300fffff
PCI: Bus 2, cardbus bridge: 0000:00:0b.0
IO window: 00001000-000010ff
IO window: 00001400-000014ff
PREFETCH window: 20000000-23ffffff
MEM window: 24000000-27ffffff
PCI: Bus 6, cardbus bridge: 0000:00:0b.1
IO window: 00001800-000018ff
IO window: 00002000-000020ff
PREFETCH window: 28000000-2bffffff
MEM window: 2c000000-2fffffff
PCI: Found IRQ 11 for device 0000:00:0b.0
PCI: Sharing IRQ 11 with 0000:01:00.0
PCI: Found IRQ 11 for device 0000:00:0b.1
PCI: Sharing IRQ 11 with 0000:00:0c.0
NET: Registered protocol family 2
Yenta: ISA IRQ mask 0x04b0, PCI irq 11
Socket status: 30000007
Yenta: CardBus bridge found at 0000:00:0b.1 [1179:0001]
Yenta: ISA IRQ mask 0x04b0, PCI irq 11
Socket status: 30000007
NET: Registered protocol family 23
PCI: Found IRQ 11 for device 0000:00:09.0
IrDA: Registered device irda0
toshoboe: Using multiple tasks, version $Id: donauboe.c V2.18 ven jan 10 03:14:16 2003$
PCI: Found IRQ 11 for device 0000:00:0c.0
PCI: Sharing IRQ 11 with 0000:00:0b.1
rtc_cmos 00:09: rtc core: registered rtc_cmos as rtc0
rtc_cmos: probe of 00:09 failed with error -16
parport_pc 00:10: reported by Plug and Play BIOS
parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
ALSA sound/pci/ymfpci/ymfpci_main.c:2434: firmware request failed: -2
Yamaha DS-1 PCI: probe of 0000:00:0c.0 failed with error -2
cs: IO port probe 0x100-0x3af: clean.
cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
cs: IO port probe 0x820-0x8ff: clean.
cs: IO port probe 0xc00-0xcf7: clean.
cs: IO port probe 0xa00-0xaff: clean.
cs: IO port probe 0x100-0x3af: clean.
cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
cs: IO port probe 0x820-0x8ff: clean.
cs: IO port probe 0xc00-0xcf7: clean.
cs: IO port probe 0xa00-0xaff: clean.
PCI: Found IRQ 11 for device 0000:00:0c.0
PCI: Sharing IRQ 11 with 0000:00:0b.1
ALSA sound/pci/ymfpci/ymfpci_main.c:2434: firmware request failed: -2
Yamaha DS-1 PCI: probe of 0000:00:0c.0 failed with error -2
snd_ymfpci: Unknown parameter `irq'
snd_ymfpci: Unknown parameter `irq'
PCI: Found IRQ 11 for device 0000:00:0c.0
PCI: Sharing IRQ 11 with 0000:00:0b.1
ALSA sound/pci/ymfpci/ymfpci_main.c:2434: firmware request failed: -2
Yamaha DS-1 PCI: probe of 0000:00:0c.0 failed with error -2
pccard: CardBus card inserted into slot 1
ndiswrapper version 1.47 loaded (smp=yes)
ndiswrapper: driver wg511v2 (NETGEAR,09/17/2004,3.1.0.19) loaded
PCI: Enabling device 0000:06:00.0 (0000 -> 0002)
PCI: Setting latency timer of device 0000:06:00.0 to 64
ndiswrapper: using IRQ 11
wlan0: ethernet device 00:0f:b5:f7:ed:a9 using NDIS driver: wg511v2, version: 0x3000027, NDIS version: 0x501, vendor: 'NDIS Network Adapter', 11AB:1FAA.5.conf
ndiswrapper (set_encr_mode:673): setting encryption mode to 6 failed (C00000BB)
wlan0: encryption modes supported: WEP; TKIP with WPA
usbcore: registered new interface driver ndiswrapper
PCI: Found IRQ 11 for device 0000:00:0c.0
PCI: Sharing IRQ 11 with 0000:00:0b.1
ALSA sound/pci/ymfpci/ymfpci_main.c:2434: firmware request failed: -2
Yamaha DS-1 PCI: probe of 0000:00:0c.0 failed with error -2
PCI: Found IRQ 11 for device 0000:00:0c.0
PCI: Sharing IRQ 11 with 0000:00:0b.1
ALSA sound/pci/ymfpci/ymfpci_main.c:2434: firmware request failed: -2
Yamaha DS-1 PCI: probe of 0000:00:0c.0 failed with error -2
und ALSACONF *************
ALSA lib confmisc.c:768:(parse_card) cannot find card '0'
ALSA lib conf.c:3510:(_snd_config_evaluate) function snd_func_card_driver returned error: Kein passendes Gerät gefunden
ALSA lib confmisc.c:392:(snd_func_concat) error evaluating strings
ALSA lib conf.c:3510:(_snd_config_evaluate) function snd_func_concat returned error: Kein passendes Gerät gefunden
ALSA lib confmisc.c:1251:(snd_func_refer) error evaluating name
ALSA lib conf.c:3510:(_snd_config_evaluate) function snd_func_refer returned error: Kein passendes Gerät gefunden
ALSA lib conf.c:3982:(snd_config_expand) Evaluate error: Kein passendes Gerät gefunden
ALSA lib pcm.c:2145:(snd_pcm_open_noupdate) Unknown PCM default
aplay: main:546: audio open error: Kein passendes Gerät gefunden
Saving the mixer setup used for this in /etc/asound.state.
/usr/sbin/alsactl: save_state:1253: No soundcards found...
Yast sagt, Fehler während Installation, Kernelmodul snd_ymfpci kann nicht geladen werden, möglicherweise falsche Parameter und/oder IO- oder IRQ-Parameter.
Hm.....
habe auf einem Laptop von openSuse 10.2 zu 10.3 upgegradet, jetzt will die Soundkarte nicht mehr. Die Ausgabe von dmesg (gekürzt)
PCI: Using IRQ router PIIX/ICH [8086/7110] at 0000:00:05.0
PCI: setting IRQ 11 as level-triggered
PCI: Found IRQ 11 for device 0000:00:0b.0
PCI: Sharing IRQ 11 with 0000:01:00.0
PCI: Found IRQ 11 for device 0000:00:0b.1
PCI: Sharing IRQ 11 with 0000:00:0c.0
ACPI Exception (utmutex-0263): AE_BAD_PARAMETER, Thread CFFCEAB0 could not acquire Mutex [3] [20070126]
ACPI: RTC can wake from S4
pnp: 00:01: iomem range 0x0-0x9ffff could not be reserved
pnp: 00:01: iomem range 0x0-0x0 could not be reserved
pnp: 00:01: iomem range 0xe8000-0xebfff could not be reserved
pnp: 00:01: iomem range 0xf0000-0xfffff could not be reserved
Time: tsc clocksource has been installed.
PCI: Bridge: 0000:00:01.0
IO window: disabled.
MEM window: f0000000-f7ffffff
PREFETCH window: 30000000-300fffff
PCI: Bus 2, cardbus bridge: 0000:00:0b.0
IO window: 00001000-000010ff
IO window: 00001400-000014ff
PREFETCH window: 20000000-23ffffff
MEM window: 24000000-27ffffff
PCI: Bus 6, cardbus bridge: 0000:00:0b.1
IO window: 00001800-000018ff
IO window: 00002000-000020ff
PREFETCH window: 28000000-2bffffff
MEM window: 2c000000-2fffffff
PCI: Found IRQ 11 for device 0000:00:0b.0
PCI: Sharing IRQ 11 with 0000:01:00.0
PCI: Found IRQ 11 for device 0000:00:0b.1
PCI: Sharing IRQ 11 with 0000:00:0c.0
NET: Registered protocol family 2
Yenta: ISA IRQ mask 0x04b0, PCI irq 11
Socket status: 30000007
Yenta: CardBus bridge found at 0000:00:0b.1 [1179:0001]
Yenta: ISA IRQ mask 0x04b0, PCI irq 11
Socket status: 30000007
NET: Registered protocol family 23
PCI: Found IRQ 11 for device 0000:00:09.0
IrDA: Registered device irda0
toshoboe: Using multiple tasks, version $Id: donauboe.c V2.18 ven jan 10 03:14:16 2003$
PCI: Found IRQ 11 for device 0000:00:0c.0
PCI: Sharing IRQ 11 with 0000:00:0b.1
rtc_cmos 00:09: rtc core: registered rtc_cmos as rtc0
rtc_cmos: probe of 00:09 failed with error -16
parport_pc 00:10: reported by Plug and Play BIOS
parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
ALSA sound/pci/ymfpci/ymfpci_main.c:2434: firmware request failed: -2
Yamaha DS-1 PCI: probe of 0000:00:0c.0 failed with error -2
cs: IO port probe 0x100-0x3af: clean.
cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
cs: IO port probe 0x820-0x8ff: clean.
cs: IO port probe 0xc00-0xcf7: clean.
cs: IO port probe 0xa00-0xaff: clean.
cs: IO port probe 0x100-0x3af: clean.
cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
cs: IO port probe 0x820-0x8ff: clean.
cs: IO port probe 0xc00-0xcf7: clean.
cs: IO port probe 0xa00-0xaff: clean.
PCI: Found IRQ 11 for device 0000:00:0c.0
PCI: Sharing IRQ 11 with 0000:00:0b.1
ALSA sound/pci/ymfpci/ymfpci_main.c:2434: firmware request failed: -2
Yamaha DS-1 PCI: probe of 0000:00:0c.0 failed with error -2
snd_ymfpci: Unknown parameter `irq'
snd_ymfpci: Unknown parameter `irq'
PCI: Found IRQ 11 for device 0000:00:0c.0
PCI: Sharing IRQ 11 with 0000:00:0b.1
ALSA sound/pci/ymfpci/ymfpci_main.c:2434: firmware request failed: -2
Yamaha DS-1 PCI: probe of 0000:00:0c.0 failed with error -2
pccard: CardBus card inserted into slot 1
ndiswrapper version 1.47 loaded (smp=yes)
ndiswrapper: driver wg511v2 (NETGEAR,09/17/2004,3.1.0.19) loaded
PCI: Enabling device 0000:06:00.0 (0000 -> 0002)
PCI: Setting latency timer of device 0000:06:00.0 to 64
ndiswrapper: using IRQ 11
wlan0: ethernet device 00:0f:b5:f7:ed:a9 using NDIS driver: wg511v2, version: 0x3000027, NDIS version: 0x501, vendor: 'NDIS Network Adapter', 11AB:1FAA.5.conf
ndiswrapper (set_encr_mode:673): setting encryption mode to 6 failed (C00000BB)
wlan0: encryption modes supported: WEP; TKIP with WPA
usbcore: registered new interface driver ndiswrapper
PCI: Found IRQ 11 for device 0000:00:0c.0
PCI: Sharing IRQ 11 with 0000:00:0b.1
ALSA sound/pci/ymfpci/ymfpci_main.c:2434: firmware request failed: -2
Yamaha DS-1 PCI: probe of 0000:00:0c.0 failed with error -2
PCI: Found IRQ 11 for device 0000:00:0c.0
PCI: Sharing IRQ 11 with 0000:00:0b.1
ALSA sound/pci/ymfpci/ymfpci_main.c:2434: firmware request failed: -2
Yamaha DS-1 PCI: probe of 0000:00:0c.0 failed with error -2
und ALSACONF *************
ALSA lib confmisc.c:768:(parse_card) cannot find card '0'
ALSA lib conf.c:3510:(_snd_config_evaluate) function snd_func_card_driver returned error: Kein passendes Gerät gefunden
ALSA lib confmisc.c:392:(snd_func_concat) error evaluating strings
ALSA lib conf.c:3510:(_snd_config_evaluate) function snd_func_concat returned error: Kein passendes Gerät gefunden
ALSA lib confmisc.c:1251:(snd_func_refer) error evaluating name
ALSA lib conf.c:3510:(_snd_config_evaluate) function snd_func_refer returned error: Kein passendes Gerät gefunden
ALSA lib conf.c:3982:(snd_config_expand) Evaluate error: Kein passendes Gerät gefunden
ALSA lib pcm.c:2145:(snd_pcm_open_noupdate) Unknown PCM default
aplay: main:546: audio open error: Kein passendes Gerät gefunden
Saving the mixer setup used for this in /etc/asound.state.
/usr/sbin/alsactl: save_state:1253: No soundcards found...
Yast sagt, Fehler während Installation, Kernelmodul snd_ymfpci kann nicht geladen werden, möglicherweise falsche Parameter und/oder IO- oder IRQ-Parameter.
Hm.....