Mr.Nobody
22.12.07, 14:49
Hallo,
mein Problem ist, seit dem ich /var und /tmp auf hdb5 und hdb6 verlegt habe,
macht das System beim Booten immer eine längere Pause bei einer bestimmten Stelle im Bootvorgang.(Beim einhängen der Partitionen) Ab der Meldung für die Konfiguration der WLAN Karte geht der Bootvorgang wieder normal schnell. Wenn das System und KDE gestartet wurde, kann ich gleich schnell arbeiten wie früher auch. In den Bootmeldungen habe ich den Bereich rot markiert in dem das System langsamer wird beim Booten. (Zeilenweise Ausgabe der Bootmeldungen auf dem Bildschirm, dannach laufen die Meldungen wieder sehr schnell über den Bildschirm.
ich habe Suse 9.2 prof.
Jetzt habe ich aus Platzgründen meine beiden Verzeichnisse /var und /tmp
von hda6 auf hdb5 und hdb6 verlegt. Gemacht habe ich das mit dem rescue System. Kopiert habe ich den Inhalt der Verzeichnisse mit cp -a * in hdb5 und hdb6. Dann habe ich die alten Verzeichnisse /tmp und /var umbenannt, einen neuen Mountpunkt für /tmp und /var erstellt.
Dann die /etc/fstab so angepasst:
/dev/hdb6 /tmp reiserfs defaults 0 2
/dev/hdb5 /var reiserfs defaults 0 2
Vorher sah die /etc/fstab so aus:
hauptrechner:/home/test # cat /etc/fstab
/dev/hda1 /mnt/windows_xp_ntfs_hda1 ntfs defaults,user,ro,exec,umask=000 0 0
/dev/hda2 /mnt/windows_xp_fat_hda2 vfat defaults,user,umask=000 0 0
/dev/hda6 / reiserfs acl,user_xattr 1 1
#/dev/hda7 /home reiserfs defaults 1 2
#/dev/hda5 swap swap pri=42 0 0
devpts /dev/pts devpts mode=0620,gid=5 0 0
proc /proc proc defaults 0 0
usbfs /proc/bus/usb usbfs noauto 0 0
sysfs /sys sysfs noauto 0 0
/dev/cdrecorder /media/cdrecorder subfs fs=cdfss,ro,procuid,nosuid,nodev,exec,iocharset=ut f8 0 0
/dev/dvd /media/dvd subfs fs=cdfss,ro,procuid,nosuid,nodev,exec,iocharset=ut f8 0 0
/dev/fd0 /media/floppy subfs fs=floppyfss,procuid,nodev,nosuid,sync 0 0
/dev/dvdram /media/dvdram subfs fs=cdfss,ro,procuid,nosuid,nodev,exec,iocharset=ut f8 0 0
/dev/hdb2 swap swap pri=42 0 0
/dev/hdb3 /home reiserfs defaults 1 2
Hier sind die Bootmeldungen aus var/log/messages
test@hauptrechner:~> cat /var/log/boot.msg
Inspecting /boot/System.map-2.6.8-24-default
Loaded 23888 symbols from /boot/System.map-2.6.8-24-default.
Symbols match kernel version 2.6.8.
No module symbols loaded - kernel modules not enabled.
klogd 1.4.1, log source = ksyslog started.
<4>Linux version 2.6.8-24-default (geeko@buildhost) (gcc version 3.3.4 (pre 3.3.5 20040809)) #1 Wed Oct 6 09:16:23 UTC 2004
<6>BIOS-provided physical RAM map:
<4> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
<4> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
<4> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
<4> BIOS-e820: 0000000000100000 - 000000007fff0000 (usable)
<4> BIOS-e820: 000000007fff0000 - 000000007fff8000 (ACPI data)
<4> BIOS-e820: 000000007fff8000 - 0000000080000000 (ACPI NVS)
<4> BIOS-e820: 00000000fec00000 - 00000000fed00000 (reserved)
<4> BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
<4> BIOS-e820: 00000000ffee0000 - 00000000fff0ffff (reserved)
<4> BIOS-e820: 00000000fffc0000 - 0000000100000000 (reserved)
<5>128MB vmalloc/ioremap area available.
<5>1151MB HIGHMEM available.
<5>896MB LOWMEM available.
<7>On node 0 totalpages: 524272
<7> DMA zone: 4096 pages, LIFO batch:1
<7> Normal zone: 225280 pages, LIFO batch:16
<7> HighMem zone: 294896 pages, LIFO batch:16
<6>DMI 2.3 present.
<6>ACPI: RSDP (v000 AMI ) @ 0x000fa1f0
<6>ACPI: RSDT (v001 AMIINT SiS645XX 0x00000010 MSFT 0x0100000b) @ 0x7fff0000
<6>ACPI: FADT (v001 AMIINT SiS645XX 0x00000011 MSFT 0x0100000b) @ 0x7fff0030
<6>ACPI: MADT (v001 AMIINT SiS645XX 0x00001000 MSFT 0x0100000b) @ 0x7fff00c0
<6>ACPI: DSDT (v001 SiS 648 0x00001000 MSFT 0x0100000d) @ 0x00000000
<6>ACPI: PM-Timer IO Port: 0x808
<6>ACPI: local apic disabled
<4>Built 1 zonelists
<4>Kernel command line: auto BOOT_IMAGE=SUSE_LINUX_9.2 root=306 selinux=0 splash=native resume=/dev/hda5 showopts desktop elevator=as
<6>Initializing CPU#0
<4>PID hash table entries: 4096 (order: 12, 65536 bytes)
<4>Detected 2534.235 MHz processor.
<6>Using pmtmr for high-res timesource
<4>Console: colour dummy device 80x25
<4>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
<4>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
<6>Memory: 2074220k/2097088k available (2074k kernel code, 21984k reserved, 782k data, 212k init, 1179584k highmem)
<4>Checking if this processor honours the WP bit even in supervisor mode... Ok.
<7>Calibrating delay loop... 5029.88 BogoMIPS (lpj=2514944)
<6>Security Scaffold v1.0.0 initialized
<6>SELinux: Disabled at boot.
<4>Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
<7>CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000
<7>CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000
<6>CPU: Trace cache: 12K uops, L1 D cache: 8K
<6>CPU: L2 cache: 512K
<7>CPU: After all inits, caps: bfebfbff 00000000 00000000 00000080
<6>Intel machine check architecture supported.
<6>Intel machine check reporting enabled on CPU#0.
<6>CPU0: Intel P4/Xeon Extended MCE MSRs (12) available
<6>CPU0: Thermal monitoring enabled
<4>CPU: Intel(R) Pentium(R) 4 CPU 2.53GHz stepping 07
<6>Enabling fast FPU save and restore... done.
<6>Enabling unmasked SIMD FPU exception support... done.
<6>Checking 'hlt' instruction... OK.
<4>ACPI: IRQ9 SCI: Edge set to Level Trigger.
<6>checking if image is initramfs...it isn't (no cpio magic); looks like an initrd
<6>Looking for DSDT in initrd ...No customized DSDT found in initrd!
<6>Freeing initrd memory: 1181k freed
<6>NET: Registered protocol family 16
<6>PCI: PCI BIOS revision 2.10 entry at 0xfdb31, last bus=2
<6>PCI: Using configuration type 1
<6>mtrr: v2.0 (20020519)
<6>ACPI: Subsystem revision 20040715
<6>ACPI: Interpreter enabled
<6>ACPI: Using PIC for interrupt routing
<6>ACPI: PCI Root Bridge [PCI0] (00:00)
<4>PCI: Probing PCI hardware (bus 00)
<4>Uncovering SIS963 that hid as a SIS503 (compatible=1)
<6>Enabling SiS 96x SMBus.
<7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
<6>ACPI: Power Resource [URP1] (off)
<6>ACPI: Power Resource [URP2] (off)
<6>ACPI: Power Resource [FDDP] (off)
<6>ACPI: Power Resource [LPTP] (off)
<4>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 *11 12 14 15)
<4>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 *11 12 14 15)
<4>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 *10 11 12 14 15)
<4>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 *10 11 12 14 15)
<4>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 *10 11 12 14 15)
<4>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 *10 11 12 14 15)
<4>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 *11 12 14 15)
<4>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 *10 11 12 14 15)
<6>Linux Plug and Play Support v0.97 (c) Adam Belay
<6>PCI: Using ACPI for IRQ routing
<4>ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
<6>ACPI: PCI interrupt 0000:00:02.1 -> GSI 11 (level, low) -> IRQ 11
<4>ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 10
<6>ACPI: PCI interrupt 0000:00:03.0[A] -> GSI 10 (level, low) -> IRQ 10
<4>ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 10
<6>ACPI: PCI interrupt 0000:00:03.1[B] -> GSI 10 (level, low) -> IRQ 10
<4>ACPI: PCI Interrupt Link [LNKG] enabled at IRQ 11
<6>ACPI: PCI interrupt 0000:00:03.2[C] -> GSI 11 (level, low) -> IRQ 11
<4>ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 10
<6>ACPI: PCI interrupt 0000:00:03.3[D] -> GSI 10 (level, low) -> IRQ 10
<4>ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 10
<6>ACPI: PCI interrupt 0000:00:08.0[A] -> GSI 10 (level, low) -> IRQ 10
<4>ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
<6>ACPI: PCI interrupt 0000:00:09.0[A] -> GSI 11 (level, low) -> IRQ 11
<6>ACPI: PCI interrupt 0000:00:0a.0[A] -> GSI 11 (level, low) -> IRQ 11
<6>ACPI: PCI interrupt 0000:00:0a.1[A] -> GSI 11 (level, low) -> IRQ 11
<4>ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10
<6>ACPI: PCI interrupt 0000:00:0b.0[A] -> GSI 10 (level, low) -> IRQ 10
<6>ACPI: PCI interrupt 0000:00:0f.0[A] -> GSI 10 (level, low) -> IRQ 10
<6>ACPI: PCI interrupt 0000:01:00.0[A] -> GSI 11 (level, low) -> IRQ 11
<4>TC classifier action (bugs to netdev@oss.sgi.com cc hadi@cyberus.ca)
<6>apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
<5>apm: overridden by ACPI.
<6>audit: initializing netlink socket (disabled)
<3>audit(1198336054.766:0): initialized
<4>highmem bounce pool size: 64 pages
<4>Total HugeTLB memory allocated, 0
<5>VFS: Disk quotas dquot_6.5.1
<4>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
<6>Initializing Cryptographic API
<6>vesafb: framebuffer at 0xc0000000, mapped to 0xf8880000, using 12288k, total131072k
<6>vesafb: mode is 1024x768x32, linelength=4096, pages=1
<6>vesafb: protected mode interface info at c000:d500
<6>vesafb: scrolling: redraw
<6>vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
<4>Console: switching to colour frame buffer device 128x48
<6>fb0: VESA VGA frame buffer device
<6>isapnp: Scanning for PnP cards...
<6>isapnp: No Plug & Play device found
<6>Real Time Clock Driver v1.12
<6>serio: i8042 KBD port at 0x60,0x64 irq 1
<6>serio: i8042 AUX port at 0x60,0x64 irq 12
<6>Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled
<4>ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
<4>ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
<4>Using anticipatory io scheduler
<6>Floppy drive(s): fd0 is 1.44M
<6>FDC 0 is a post-1991 82077
<4>RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize
<6>loop: loaded (max 8 devices)
<6>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
<6>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
<6>SIS5513: IDE controller at PCI slot 0000:00:02.5
<6>SIS5513: chipset revision 0
<6>SIS5513: not 100%% native mode: will probe irqs later
<6>SIS5513: SiS 962/963 MuTIOL IDE UDMA133 controller
<6> ide0: BM-DMA at 0xff00-0xff07, BIOS settings: hda:DMA, hdb:DMA
<6> ide1: BM-DMA at 0xff08-0xff0f, BIOS settings: hdc:DMA, hdd:DMA
<7>Probing IDE interface ide0...
<4>hda: ST3120026A, ATA DISK drive
<4>hdb: HDT722525DLAT80, ATA DISK drive
<4>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
<7>Probing IDE interface ide1...
<4>hdc: HL-DT-ST DVDRAM GSA-H12N, ATAPI CD/DVD-ROM drive
<4>hdd: CW088D ATAPI CD-R/RW, ATAPI CD/DVD-ROM drive
<4>ide1 at 0x170-0x177,0x376 on irq 15
<7>Probing IDE interface ide2...
<7>ide2: Wait for ready failed before probe !
<7>Probing IDE interface ide3...
<7>ide3: Wait for ready failed before probe !
<7>Probing IDE interface ide4...
<7>ide4: Wait for ready failed before probe !
<7>Probing IDE interface ide5...
<7>ide5: Wait for ready failed before probe !
<6>hda: max request size: 1024KiB
<6>hda: 234441648 sectors (120034 MB) w/8192KiB Cache, CHS=16383/255/63, UDMA(100)
<7>hda: cache flushes supported
<6> hda: hda1 hda2 hda3 < hda5 hda6 hda7 hda8 hda9 >
<6>hdb: max request size: 1024KiB
<6>hdb: 488397168 sectors (250059 MB) w/7674KiB Cache, CHS=30401/255/63, UDMA(133)
<7>hdb: cache flushes supported
<6> hdb: hdb1 hdb2 hdb3 hdb4 < hdb5 hdb6 >
<4>ide-floppy driver 0.99.newide
<6>mice: PS/2 mouse device common for all mice
<6>input: AT Translated Set 2 keyboard on isa0060/serio0
<6>alps.c: E6 report: 00 00 28
<6>input: ImExPS/2 Generic Explorer Mouse on isa0060/serio1
<6>input: PC Speaker
<6>md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
<6>NET: Registered protocol family 2
<6>IP: routing cache hash table of 16384 buckets, 128Kbytes
<6>TCP: Hash tables configured (established 524288 bind 65536)
<6>NET: Registered protocol family 1
<6>NET: Registered protocol family 8
<6>NET: Registered protocol family 20
<7>PM: Reading pmdisk image.
<7>swsusp: Resume From Partition: /dev/hda5
<7><3>swsusp: Invalid partition type.
<7>pmdisk: Error -22 resuming
<7>PM: Resume from disk failed.
<6>ACPI: (supports S0 S3 S4 S5)
<4>ACPI wakeup devices:
<4>PCI0 PS2M PS2K UAR1 UAR2 USB1 USB2 USB3 USB4 S139 LAN MDM AUD
<6>md: Autodetecting RAID arrays.
<6>md: autorun ...
<6>md: ... autorun DONE.
<5>RAMDISK: Compressed image found at block 0
<4>VFS: Mounted root (ext2 filesystem).
<5>ReiserFS: hda6: found reiserfs format "3.6" with standard journal
<5>ReiserFS: hda6: using ordered data mode
<4>reiserfs: using flush barriers
<5>ReiserFS: hda6: journal params: device hda6, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
<5>ReiserFS: hda6: checking transaction log (hda6)
<5>ReiserFS: hda6: Using r5 hash to sort names
<4>VFS: Mounted root (reiserfs filesystem) readonly.
<5>Trying to move old root to /initrd ... failed
<5>Unmounting old root
<5>Trying to free ramdisk memory ... okay
<6>Freeing unused kernel memory: 212k freed
<4>reiserfs: enabling write barrier flush mode
<6>usbcore: registered new driver usbfs
<6>usbcore: registered new driver hub
<4>rt2500: unsupported module, tainting kernel.
<6>ACPI: PCI interrupt 0000:00:09.0[A] -> GSI 11 (level, low) -> IRQ 11
<6>rt2500 1.1.0 BETA4 2006/06/18 http://rt2x00.serialmonkey.com
<6>md: Autodetecting RAID arrays.
<6>md: autorun ...
<6>md: ... autorun DONE.
<6>device-mapper: 4.1.0-ioctl (2003-12-10) initialised: dm@uk.sistina.com
<7>evdev_connect: evdev c20edd80 handle c20edd9c name event0
<7>evdev_connect: evdev c20edb80 handle c20edb9c name event1
<7>evdev_connect: evdev c20eda80 handle c20eda9c name event2
<7>ieee1394: Initialized config rom entry `ip1394'
[B]<6>ohci1394: $Rev: 1223 $ Ben Collins <bcollins@debian.org>
<6>ACPI: PCI interrupt 0000:00:08.0[A] -> GSI 10 (level, low) -> IRQ 10
<6>ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[10] MMIO=[dfffa800-dfffafff]Max Packet=[2048]
<6>Linux agpgart interface v0.100 (c) Dave Jones
<6>agpgart: Detected SiS 648 chipset
<6>agpgart: Maximum main memory to use for agp memory: 1919M
<6>agpgart: AGP aperture is 64M @ 0xe0000000
<7>ieee1394: Host added: ID:BUS[0-00:1023] GUID[0005ce0027006213]
<7>ohci_hcd: 2004 Feb 02 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
<6>ACPI: PCI interrupt 0000:00:03.0[A] -> GSI 10 (level, low) -> IRQ 10
<6>ohci_hcd 0000:00:03.0: OHCI Host Controller
<6>ohci_hcd 0000:00:03.0: irq 10, pci mem f9604000
<6>ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 1
<6>usb usb1: Product: OHCI Host Controller
<6>usb usb1: Manufacturer: Linux 2.6.8-24-default ohci_hcd
<6>usb usb1: SerialNumber: 0000:00:03.0
<6>hub 1-0:1.0: USB hub found
<6>hub 1-0:1.0: 2 ports detected
<6>ACPI: PCI interrupt 0000:00:03.1[B] -> GSI 10 (level, low) -> IRQ 10
<6>ohci_hcd 0000:00:03.1: OHCI Host Controller
<6>ohci_hcd 0000:00:03.1: irq 10, pci mem f9606000
<6>ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 2
<6>usb usb2: Product: OHCI Host Controller
<6>usb usb2: Manufacturer: Linux 2.6.8-24-default ohci_hcd
<6>usb usb2: SerialNumber: 0000:00:03.1
<6>hub 2-0:1.0: USB hub found
<6>hub 2-0:1.0: 2 ports detected
<6>ACPI: PCI interrupt 0000:00:03.2[C] -> GSI 11 (level, low) -> IRQ 11
<6>ohci_hcd 0000:00:03.2: OHCI Host Controller
<6>ohci_hcd 0000:00:03.2: irq 11, pci mem f9608000
<6>ohci_hcd 0000:00:03.2: new USB bus registered, assigned bus number 3
<6>usb usb3: Product: OHCI Host Controller
<6>usb usb3: Manufacturer: Linux 2.6.8-24-default ohci_hcd
<6>usb usb3: SerialNumber: 0000:00:03.2
<6>hub 3-0:1.0: USB hub found
<6>hub 3-0:1.0: 2 ports detected
<6>ACPI: PCI interrupt 0000:00:03.3[D] -> GSI 10 (level, low) -> IRQ 10
<6>ehci_hcd 0000:00:03.3: EHCI Host Controller
<6>ehci_hcd 0000:00:03.3: irq 10, pci mem f9610000
<6>ehci_hcd 0000:00:03.3: new USB bus registered, assigned bus number 4
<7>PCI: cache line size of 128 is not supported by device 0000:00:03.3
<6>ehci_hcd 0000:00:03.3: USB 2.0 enabled, EHCI 1.00, driver 2004-May-10
<6>usb usb4: Product: EHCI Host Controller
<6>usb usb4: Manufacturer: Linux 2.6.8-24-default ehci_hcd
<6>usb usb4: SerialNumber: 0000:00:03.3
<6>hub 4-0:1.0: USB hub found
<6>hub 4-0:1.0: 6 ports detected
<6>8139too Fast Ethernet driver 0.9.27
<6>ACPI: PCI interrupt 0000:00:0f.0[A] -> GSI 10 (level, low) -> IRQ 10
<6>eth0: RealTek RTL8139 at 0xf9618f00, 00:10:dc:e5:4e:20, IRQ 10
<7>eth0: Identified 8139 chip type 'RTL-8101'
<6>NTFS driver 2.1.17 [Flags: R/O MODULE].
<6>NTFS volume version 3.1.
<6>subfs 0.9
<5>ReiserFS: hda8: found reiserfs format "3.6" with standard journal
<5>ReiserFS: hda8: using ordered data mode
<4>reiserfs: using flush barriers
<5>ReiserFS: hda8: journal params: device hda8, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
<5>ReiserFS: hda8: checking transaction log (hda8)
<5>ReiserFS: hda8: Using r5 hash to sort names
<5>ReiserFS: hdb3: found reiserfs format "3.6" with standard journal
<5>ReiserFS: hdb3: using ordered data mode
<4>reiserfs: using flush barriers
<5>ReiserFS: hdb3: journal params: device hdb3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
<5>ReiserFS: hdb3: checking transaction log (hdb3)
<5>ReiserFS: hdb3: Using r5 hash to sort names
<5>ReiserFS: hdb6: found reiserfs format "3.6" with standard journal
<5>ReiserFS: hdb6: using ordered data mode
<4>reiserfs: using flush barriers
<5>ReiserFS: hdb6: journal params: device hdb6, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
<5>ReiserFS: hdb6: checking transaction log (hdb6)
<5>ReiserFS: hdb6: Using r5 hash to sort names
<5>ReiserFS: hdb5: found reiserfs format "3.6" with standard journal
<5>ReiserFS: hdb5: using ordered data mode
<4>reiserfs: using flush barriers
<5>ReiserFS: hdb5: journal params: device hdb5, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
<5>ReiserFS: hdb5: checking transaction log (hdb5)
<5>ReiserFS: hdb5: Using r5 hash to sort names
Kernel logging (ksyslog) stopped.
Kernel log daemon terminating.
Boot logging started on /dev/tty1(/dev/console) at Sat Dec 22 16:07:45 2007
<notice>run boot scripts (setserial boot.proc)
Configuring serial ports...
/dev/ttyS0 at 0x03f8 (irq = 4) is a 16550A
/dev/ttyS1 at 0x02f8 (irq = 3) is a 16550A
Configured serial ports
done<notice>exit status of (setserial boot.proc) is (0 0)
<notice>run boot scripts (boot.shm)
Mounting shared memory FS on /dev/shmdone
<notice>exit status of (boot.shm) is (0)
<notice>run boot scripts (boot.rootfsck)
Checking root file system...
fsck 1.35 (28-Feb-2004)
Reiserfs super block in block 16 on 0x306 of format 3.6 with standard journal
Blocks (total/free): 2622592/843841 by 4096 bytes
Filesystem is clean
Filesystem seems mounted read-only. Skipping journal replay.
Checking internal tree..finished
done<notice>exit status of (boot.rootfsck) is (0)
<notice>run boot scripts (boot.hotplug)
Hotplug is already active (disable with NOHOTPLUG=1 at the boot prompt)done
<notice>exit status of (boot.hotplug) is (0)
<notice>run boot scripts (boot.coldplug)
coldplug scanning input: ***done
scanning pci: ****.******WWW*Wdone
scanning usb: done
hwup: Loading module 'rt2500' for device '0'
hwup: Loading module 'rt2500' for device '1'
done
<notice>exit status of (boot.coldplug) is (0)
<notice>run boot scripts (boot.md boot.device-mapper)
Activating device mapper...
Creating /dev/mapper/control character device with major:10 minor:63.
done
<notice>exit status of (boot.md boot.device-mapper) is (0 0)
<notice>run boot scripts (boot.localfs)
Checking file systems...
fsck 1.35 (28-Feb-2004)
Reiserfs super block in block 16 on 0x343 of format 3.6 with standard journal
Blocks (total/free): 3142704/1426589 by 4096 bytes
Filesystem is clean
Replaying journal..
Reiserfs journal '/dev/hdb3' in blocks [18..8211]: 0 transactions replayed
Checking internal tree..finished
Reiserfs super block in block 16 on 0x346 of format 3.6 with standard journal
Blocks (total/free): 526112/517884 by 4096 bytes
Filesystem is clean
Replaying journal..
Reiserfs journal '/dev/hdb6' in blocks [18..8211]: 0 transactions replayed
Checking internal tree..finished
Reiserfs super block in block 16 on 0x345 of format 3.6 with standard journal
Blocks (total/free): 389568/242758 by 4096 bytes
Filesystem is clean
Replaying journal..
Reiserfs journal '/dev/hdb5' in blocks [18..8211]: 0 transactions replayed
Checking internal tree..finished
doneSetting up kernel module dependencies (if required)done
Mounting local file systems...
proc on /proc type proc (rw)
tmpfs on /dev/shm type tmpfs (rw)
devpts on /dev/pts type devpts (rw,mode=0620,gid=5)
/dev/hda1 on /mnt/windows_xp_ntfs_hda1 type ntfs (ro,nosuid,nodev,umask=000)
/dev/hda2 on /mnt/windows_xp_fat_hda2 type vfat (rw,noexec,nosuid,nodev,umask=000)
/dev/hdd on /media/cdrecorder type subfs (ro,nosuid,nodev,fs=cdfss,procuid,iocharset=utf8)
/dev/dvd on /media/dvd type subfs (ro,nosuid,nodev,fs=cdfss,procuid,iocharset=utf8)
/dev/fd0 on /media/floppy type subfs (rw,nosuid,nodev,sync,fs=floppyfss,procuid)
/dev/hda8 on /mnt/hda8_kopie_suse9.0 type reiserfs (rw)
/dev/hda9 on /datahda9 type vfat (rw,noexec,nosuid,nodev,umask=000)
/dev/hdc on /media/dvdram type subfs (ro,nosuid,nodev,fs=cdfss,procuid,iocharset=utf8)
/dev/hdb3 on /home type reiserfs (rw)
/dev/hdb6 on /tmp type reiserfs (rw)
/dev/hdb5 on /var type reiserfs (rw)
done<notice>exit status of (boot.localfs) is (0)
<notice>run boot scripts (boot.scpm boot.loadmodules boot.klog)
Loading required kernel modules
doneCreating /var/log/boot.msg
done<notice>killproc: kill(1927,29)
<notice>exit status of (boot.scpm boot.loadmodules boot.klog) is (0 0 0)
<notice>run boot scripts (boot.crypto)
<notice>exit status of (boot.crypto) is (0)
<notice>run boot scripts (boot.restore_permissions boot.pnet boot.idedma)
Restore device permissionsdone
Register IL Executablesdone
Setting up IDE DMA mode
/dev/hdc:
setting using_dma to 1 (on)
setting xfermode to 66 (UltraDMA mode2)
using_dma = 1 (on)
/dev/hdd:
setting using_dma to 1 (on)
setting xfermode to 66 (UltraDMA mode2)
using_dma = 1 (on)
done
<notice>exit status of (boot.restore_permissions boot.pnet boot.idedma) is (0 00)
<notice>run boot scripts (boot.swap)
Activating remaining swap-devices in /etc/fstab...
done<notice>exit status of (boot.swap) is (0)
<notice>run boot scripts (boot.clock)
Setting up the CMOS clockdone
<notice>exit status of (boot.clock) is (0)
<notice>run boot scripts (boot.ldconfig)
Setting up timezone datadone
<notice>exit status of (boot.ldconfig) is (0)
<notice>run boot scripts (boot.sysctl boot.localnet boot.isapnp)
Setting current sysctl status from /etc/sysctl.conf
net.ipv4.icmp_echo_ignore_broadcasts = 1
net.ipv4.conf.all.rp_filter = 1
done
Setting up hostname 'hauptrechner'done
Setting up loopback interface lo
lo IP address: 127.0.0.1/8
done
Cleaning temporary directories /tmpdone
<notice>exit status of (boot.sysctl boot.localnet boot.isapnp) is (0 0 0)
<notice>run boot scripts (boot.ipconfig)
Enabling syn flood protectiondone
Enabling IP forwardingdone
done
System Boot Control: The system has been set up
System Boot Control: Running /etc/init.d/boot.local
done<notice>exit status of (boot.ipconfig) is (0)
<notice>killproc: kill(1927,3)
INIT: Entering runlevel: 5
Boot logging started on /dev/tty1(/dev/console) at Sat Dec 22 15:09:38 2007
Master Resource Control: previous runlevel: N, switching to runlevel: 5
<notice>start services (random isdn hddtemp)
Initializing random number generatordone
Starting hddtemp daemon for /dev/hda<notice>startproc: execve (/usr/sbin/hddtemp) [ /usr/sbin/hddtemp -d -f /etc/hddtemp.db -p 7634 /dev/hda ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 AUTOBOOT=YES COLUMNS=128 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin RUNLEVEL=5 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=48 HOME=/ SHLVL=2 BOOT_IMAGE=SUSE_LINUX_9.2 splash=native SPLASH=no _=/sbin/startproc DAEMON=/usr/sbin/hddtemp ]
done
<notice>exit status of (random isdn hddtemp) is (0 0 0)
<notice>start services (network)
Setting up network interfaces:
lo
lo IP address: 127.0.0.1/8
done eth0 device: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+(rev 10)
eth0 configuration: eth-id-00:10:dc:e5:4e:20
eth0 IP address: 172.16.0.141/16
done ra0 device: RaLink Ralink RT2500 802.11 Cardbus Reference Card (rev 01)
ra0 configuration: wlan-ra0
ERROR: WPA-PSK is not supported yet for this device
ra0 (DHCP) . . . . . IP/Netmask: 192.168.178.22 / 255.255.255.0
doneSetting up service network . . . . . . . . . . . . . . . .done
<notice>exit status of (network) is (0)
<notice>start services (syslog)
Starting syslog services<notice>startproc: execve (/sbin/syslogd) [ /sbin/syslogd -a /var/lib/dhcp/dev/log -a /var/lib/named/dev/log -a /var/lib/ntp/dev/log ],[ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 AUTOBOOT=YES COLUMNS=128 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin RUNLEVEL=5 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=48 HOME=/ SHLVL=2 BOOT_IMAGE=SUSE_LINUX_9.2 splash=native SPLASH=no _=/sbin/startproc DAEMON=/sbin/syslogd ]
<notice>startproc: execve (/sbin/klogd) [ /sbin/klogd -c 1 -2 -x ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 AUTOBOOT=YES COLUMNS=128 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin RUNLEVEL=5 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=48 HOME=/ SHLVL=2 BOOT_IMAGE=SUSE_LINUX_9.2 splash=native SPLASH=no _=/sbin/startproc DAEMON=/sbin/klogd ]
done
<notice>exit status of (syslog) is (0)
<notice>start services (ntop nmb)
Starting service ntop
ntop admin password is not yet set. Run
ntop -A -u wwwrun
manually unused
Starting Samba NMB daemon <notice>startproc: execve (/usr/sbin/nmbd) [ /usr/sbin/nmbd -D -s /etc/samba/smb.conf ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 AUTOBOOT=YES COLUMNS=128 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin RUNLEVEL=5 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=48 HOME=/ SHLVL=2 BOOT_IMAGE=SUSE_LINUX_9.2 splash=native SPLASH=no _=/sbin/startproc DAEMON=/usr/sbin/nmbd ]
done
<notice>exit status of (ntop nmb) is (0 0)
<notice>start services (splash_early smbfs smartd resmgr portmap)
Mount SMB/ CIFS File Systems unused
Starting smartd <notice>startproc: execve (/usr/sbin/smartd) [ /usr/sbin/smartd], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 AUTOBOOT=YES COLUMNS=128 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin RUNLEVEL=5 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=48 HOME=/ SHLVL=2 BOOT_IMAGE=SUSE_LINUX_9.2 splash=native SPLASH=no _=/sbin/startproc DAEMON=/usr/sbin/smartd ]
done
Starting resource manager<notice>startproc: execve (/sbin/resmgrd) [ /sbin/resmgrd ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 AUTOBOOT=YES COLUMNS=128 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin RUNLEVEL=5 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=48 HOME=/ SHLVL=2BOOT_IMAGE=SUSE_LINUX_9.2 splash=native SPLASH=no _=/sbin/startproc DAEMON=/sbin/resmgrd ]
done
Starting RPC portmap daemon<notice>startproc: execve (/sbin/portmap) [ /sbin/portmap ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 AUTOBOOT=YES COLUMNS=128 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin RUNLEVEL=5 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=48 HOME=/ SHLVL=2 BOOT_IMAGE=SUSE_LINUX_9.2 splash=native SPLASH=no _=/sbin/startproc DAEMON=/sbin/portmap ]
done
<notice>exit status of (splash_early smbfs smartd resmgr portmap) is (0 6 0 0 0)
<notice>start services (nfsboot)
Starting nfsboot (sm-notify) done
<notice>exit status of (nfsboot) is (0)
<notice>start services (sshd spamd running-kernel privoxy named fbset alsasound)
Starting SSH daemon<notice>startproc: execve (/usr/sbin/sshd) [ /usr/sbin/sshd -o PidFile=/var/run/sshd.init.pid ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 AUTOBOOT=YES COLUMNS=128 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin RUNLEVEL=5 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=48 HOME=/ SHLVL=2 BOOT_IMAGE=SUSE_LINUX_9.2 splash=native SPLASH=no_=/sbin/startproc DAEMON=/usr/sbin/sshd ]
done
Starting spamd <notice>startproc: execve (/usr/sbin/spamd) [ /usr/sbin/spamd -d-c -L ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 AUTOBOOT=YES COLUMNS=128 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin RUNLEVEL=5 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=48 HOME=/ SHLVL=2 BOOT_IMAGE=SUSE_LINUX_9.2 splash=native SPLASH=no _=/sbin/startproc DAEMON=/usr/sbin/spamd ]
done
Starting Privoxydone
Starting name server BIND <notice>startproc: execve (/usr/sbin/named) [ /usr/sbin/named -t /var/lib/named -u named ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 AUTOBOOT=YES COLUMNS=128 PATH=/sbin:/usr/sbin:/bin:/usr/bin RUNLEVEL=5 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=48 checkAndCopyConfigFilesCalled=yes HOME=/ SHLVL=2 BOOT_IMAGE=SUSE_LINUX_9.2 namedConfChecked=yes splash=native SPLASH=no initializeNamedCalled=yes _=/sbin/startproc DAEMON=/usr/sbin/named ]
done
Starting sound driver: es1938done
Restoring the previous sound settingdone
<notice>exit status of (sshd spamd running-kernel privoxy named fbset alsasound) is (0 0 0 0 0 0 0)
<notice>start services (splash powersaved kbd)
loading ACPI modules (ac battery button fan processor thermal ) done
Starting powersaved (accessing ACPI events over acpid) <notice>startproc: execve (/usr/sbin/powersaved) [ /usr/sbin/powersaved -d -x /usr/lib/powersave/scripts -a resmgr -v 3 ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 AUTOBOOT=YES COLUMNS=128 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin RUNLEVEL=5 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=48 HOME=/ SHLVL=2 BOOT_IMAGE=SUSE_LINUX_9.2 splash=native SPLASH=no _=/sbin/startproc DAEMON=/usr/sbin/powersaved ]
Requested buffer size 2048, fragment size 1024
ALSA pcm 'default' set buffer size 2048, period size 1024 bytes
done
TiMidity starting in ALSA server mode
Opening sequencer port: 128:0 128:1 128:2 128:3
Loading keymap qwertz/de-latin1-nodeadkeys.map.gz
doneLoading compose table latin1.adddone
Start Unicode mode
doneLoading console font lat9w-16.psfu -m trivial \033(K
done<notice>exit status of (splash powersaved kbd) is (5 0 0)
<notice>start services (xntpd wwwoffle hwscan)
Try to get initial date and time via NTP from de.pool.ntp.org ntps1.gwdg.de ntps2.gwdg.de ntps3.gwdg.dedone
Starting network time protocol daemon (NTPD)done
<notice>startproc: execve (/usr/sbin/ntpd) [ /usr/sbin/ntpd -p /var/lib/ntp/var/run/ntp/ntpd.pid -u ntp -i /var/lib/ntp ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 AUTOBOOT=YES COLUMNS=128 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin RUNLEVEL=5 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=48 HOME=/ SHLVL=2 BOOT_IMAGE=SUSE_LINUX_9.2 splash=native SPLASH=no _=/sbin/startproc DAEMON=/usr/sbin/ntpd ]
Starting service wwwoffle<notice>startproc: execve (/usr/sbin/wwwoffled) [ /usr/sbin/wwwoffled -c /etc/wwwoffle/wwwoffle.conf ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 AUTOBOOT=YES COLUMNS=128 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin RUNLEVEL=5 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=48 HOME=/ SHLVL=2 BOOT_IMAGE=SUSE_LINUX_9.2 splash=native SPLASH=no _=/sbin/startproc DAEMON=/usr/sbin/wwwoffled ]
done
Starting hardware scan on boot<notice>exit status of (xntpd wwwoffle hwscan) is(0 0 0)
<notice>start services (cups)
Starting cupsd<notice>startproc: execve (/usr/sbin/cupsd) [ /usr/sbin/cupsd ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 AUTOBOOT=YES COLUMNS=128 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin RUNLEVEL=5 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=48 HOME=/ SHLVL=2 BOOT_IMAGE=SUSE_LINUX_9.2 splash=native SPLASH=no _=/sbin/startproc DAEMON=/usr/sbin/cupsd ]
done
<notice>exit status of (cups) is (0)
<notice>start services (smb nscd)
Starting Samba SMB daemon <notice>startproc: execve (/usr/sbin/smbd) [ /usr/sbin/smbd -D -s /etc/samba/smb.conf ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh TMPDIR=/var/tmp INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 AUTOBOOT=YES COLUMNS=128 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin RUNLEVEL=5 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=48 HOME=/ SHLVL=2 BOOT_IMAGE=SUSE_LINUX_9.2 splash=native SPLASH=no _=/sbin/startproc DAEMON=/usr/sbin/smbd ]
done
Starting Name Service Cache Daemon<notice>startproc: execve (/usr/sbin/nscd) [ /usr/sbin/nscd ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 AUTOBOOT=YES COLUMNS=128 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin RUNLEVEL=5 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=48 HOME=/ SHLVL=2 BOOT_IMAGE=SUSE_LINUX_9.2 splash=native SPLASH=no _=/sbin/startproc DAEMON=/usr/sbin/nscd ]
done
<notice>exit status of (smb nscd) is (0 0)
<notice>start services (xdm postfix nfsserver)
Starting service kdm<notice>startproc: execve (/opt/kde3/bin/kdm) [ /opt/kde3/bin/kdm ], [ LC_MONETARY= CONSOLE=/dev/console TERM=linux SHELL=/bin/sh LC_NUMERIC= QTDIR=/usr/lib/qt3 LC_ALL= INIT_VERSION=sysvinit-2.85 KDEROOTHOME=/root/.kdm REDIRECT=/dev/tty1 AUTOBOOT=YES COLUMNS=128 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin LC_MESSAGES= RUNLEVEL=5 LC_COLLATE= PWD=/ SPLASHCFG= LANG=de_DE.UTF-8 PREVLEVEL=N LINES=48 HOME=/ SHLVL=2 BOOT_IMAGE=SUSE_LINUX_9.2 XCURSOR_THEME=crystalwhite WINDOWMANAGER=/usr/X11R6/bin/kde LC_CTYPE=de_DE.UTF-8 splash=native SPLASH=no LC_TIME= _=/sbin/startproc DAEMON=/opt/kde3/bin/kdm ]
done
Starting mail service (Postfix)done
Starting kernel based NFS server<notice>startproc: execve (/usr/sbin/rpc.mountd) [ /usr/sbin/rpc.mountd ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 AUTOBOOT=YES COLUMNS=128 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin RUNLEVEL=5 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=48 HOME=/ SHLVL=2 BOOT_IMAGE=SUSE_LINUX_9.2 splash=native SPLASH=no _=/sbin/startproc DAEMON=/usr/sbin/rpc.mountd ]
done
<notice>exit status of (xdm postfix nfsserver) is (0 0 0)
<notice>start services (xinetd cron)
Starting INET services. (xinetd)<notice>startproc: execve (/usr/sbin/xinetd) [ /usr/sbin/xinetd ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 AUTOBOOT=YES COLUMNS=128 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin RUNLEVEL=5 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=48 HOME=/ SHLVL=2 BOOT_IMAGE=SUSE_LINUX_9.2 splash=native SPLASH=no _=/sbin/startproc DAEMON=/usr/sbin/xinetd ]
done
Starting CRON daemon<notice>startproc: execve (/usr/sbin/cron) [ /usr/sbin/cron], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 AUTOBOOT=YES COLUMNS=128 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin RUNLEVEL=5 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=48 HOME=/ SHLVL=2 BOOT_IMAGE=SUSE_LINUX_9.2 splash=native SPLASH=no _=/sbin/startproc DAEMON=/usr/sbin/cron ]
done
<notice>exit status of (xinetd cron) is (0 0)
<notice>start services (sensors)
<notice>exit status of (sensors) is (0)
Master Resource Control: runlevel 5 has been reached
Skipped services in runlevel 5: smbfs splash
<notice>killproc: kill(4147,3)
test@hauptrechner:~>
Mit freundlichem Gruß
N
mein Problem ist, seit dem ich /var und /tmp auf hdb5 und hdb6 verlegt habe,
macht das System beim Booten immer eine längere Pause bei einer bestimmten Stelle im Bootvorgang.(Beim einhängen der Partitionen) Ab der Meldung für die Konfiguration der WLAN Karte geht der Bootvorgang wieder normal schnell. Wenn das System und KDE gestartet wurde, kann ich gleich schnell arbeiten wie früher auch. In den Bootmeldungen habe ich den Bereich rot markiert in dem das System langsamer wird beim Booten. (Zeilenweise Ausgabe der Bootmeldungen auf dem Bildschirm, dannach laufen die Meldungen wieder sehr schnell über den Bildschirm.
ich habe Suse 9.2 prof.
Jetzt habe ich aus Platzgründen meine beiden Verzeichnisse /var und /tmp
von hda6 auf hdb5 und hdb6 verlegt. Gemacht habe ich das mit dem rescue System. Kopiert habe ich den Inhalt der Verzeichnisse mit cp -a * in hdb5 und hdb6. Dann habe ich die alten Verzeichnisse /tmp und /var umbenannt, einen neuen Mountpunkt für /tmp und /var erstellt.
Dann die /etc/fstab so angepasst:
/dev/hdb6 /tmp reiserfs defaults 0 2
/dev/hdb5 /var reiserfs defaults 0 2
Vorher sah die /etc/fstab so aus:
hauptrechner:/home/test # cat /etc/fstab
/dev/hda1 /mnt/windows_xp_ntfs_hda1 ntfs defaults,user,ro,exec,umask=000 0 0
/dev/hda2 /mnt/windows_xp_fat_hda2 vfat defaults,user,umask=000 0 0
/dev/hda6 / reiserfs acl,user_xattr 1 1
#/dev/hda7 /home reiserfs defaults 1 2
#/dev/hda5 swap swap pri=42 0 0
devpts /dev/pts devpts mode=0620,gid=5 0 0
proc /proc proc defaults 0 0
usbfs /proc/bus/usb usbfs noauto 0 0
sysfs /sys sysfs noauto 0 0
/dev/cdrecorder /media/cdrecorder subfs fs=cdfss,ro,procuid,nosuid,nodev,exec,iocharset=ut f8 0 0
/dev/dvd /media/dvd subfs fs=cdfss,ro,procuid,nosuid,nodev,exec,iocharset=ut f8 0 0
/dev/fd0 /media/floppy subfs fs=floppyfss,procuid,nodev,nosuid,sync 0 0
/dev/dvdram /media/dvdram subfs fs=cdfss,ro,procuid,nosuid,nodev,exec,iocharset=ut f8 0 0
/dev/hdb2 swap swap pri=42 0 0
/dev/hdb3 /home reiserfs defaults 1 2
Hier sind die Bootmeldungen aus var/log/messages
test@hauptrechner:~> cat /var/log/boot.msg
Inspecting /boot/System.map-2.6.8-24-default
Loaded 23888 symbols from /boot/System.map-2.6.8-24-default.
Symbols match kernel version 2.6.8.
No module symbols loaded - kernel modules not enabled.
klogd 1.4.1, log source = ksyslog started.
<4>Linux version 2.6.8-24-default (geeko@buildhost) (gcc version 3.3.4 (pre 3.3.5 20040809)) #1 Wed Oct 6 09:16:23 UTC 2004
<6>BIOS-provided physical RAM map:
<4> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
<4> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
<4> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
<4> BIOS-e820: 0000000000100000 - 000000007fff0000 (usable)
<4> BIOS-e820: 000000007fff0000 - 000000007fff8000 (ACPI data)
<4> BIOS-e820: 000000007fff8000 - 0000000080000000 (ACPI NVS)
<4> BIOS-e820: 00000000fec00000 - 00000000fed00000 (reserved)
<4> BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
<4> BIOS-e820: 00000000ffee0000 - 00000000fff0ffff (reserved)
<4> BIOS-e820: 00000000fffc0000 - 0000000100000000 (reserved)
<5>128MB vmalloc/ioremap area available.
<5>1151MB HIGHMEM available.
<5>896MB LOWMEM available.
<7>On node 0 totalpages: 524272
<7> DMA zone: 4096 pages, LIFO batch:1
<7> Normal zone: 225280 pages, LIFO batch:16
<7> HighMem zone: 294896 pages, LIFO batch:16
<6>DMI 2.3 present.
<6>ACPI: RSDP (v000 AMI ) @ 0x000fa1f0
<6>ACPI: RSDT (v001 AMIINT SiS645XX 0x00000010 MSFT 0x0100000b) @ 0x7fff0000
<6>ACPI: FADT (v001 AMIINT SiS645XX 0x00000011 MSFT 0x0100000b) @ 0x7fff0030
<6>ACPI: MADT (v001 AMIINT SiS645XX 0x00001000 MSFT 0x0100000b) @ 0x7fff00c0
<6>ACPI: DSDT (v001 SiS 648 0x00001000 MSFT 0x0100000d) @ 0x00000000
<6>ACPI: PM-Timer IO Port: 0x808
<6>ACPI: local apic disabled
<4>Built 1 zonelists
<4>Kernel command line: auto BOOT_IMAGE=SUSE_LINUX_9.2 root=306 selinux=0 splash=native resume=/dev/hda5 showopts desktop elevator=as
<6>Initializing CPU#0
<4>PID hash table entries: 4096 (order: 12, 65536 bytes)
<4>Detected 2534.235 MHz processor.
<6>Using pmtmr for high-res timesource
<4>Console: colour dummy device 80x25
<4>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
<4>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
<6>Memory: 2074220k/2097088k available (2074k kernel code, 21984k reserved, 782k data, 212k init, 1179584k highmem)
<4>Checking if this processor honours the WP bit even in supervisor mode... Ok.
<7>Calibrating delay loop... 5029.88 BogoMIPS (lpj=2514944)
<6>Security Scaffold v1.0.0 initialized
<6>SELinux: Disabled at boot.
<4>Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
<7>CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000
<7>CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000
<6>CPU: Trace cache: 12K uops, L1 D cache: 8K
<6>CPU: L2 cache: 512K
<7>CPU: After all inits, caps: bfebfbff 00000000 00000000 00000080
<6>Intel machine check architecture supported.
<6>Intel machine check reporting enabled on CPU#0.
<6>CPU0: Intel P4/Xeon Extended MCE MSRs (12) available
<6>CPU0: Thermal monitoring enabled
<4>CPU: Intel(R) Pentium(R) 4 CPU 2.53GHz stepping 07
<6>Enabling fast FPU save and restore... done.
<6>Enabling unmasked SIMD FPU exception support... done.
<6>Checking 'hlt' instruction... OK.
<4>ACPI: IRQ9 SCI: Edge set to Level Trigger.
<6>checking if image is initramfs...it isn't (no cpio magic); looks like an initrd
<6>Looking for DSDT in initrd ...No customized DSDT found in initrd!
<6>Freeing initrd memory: 1181k freed
<6>NET: Registered protocol family 16
<6>PCI: PCI BIOS revision 2.10 entry at 0xfdb31, last bus=2
<6>PCI: Using configuration type 1
<6>mtrr: v2.0 (20020519)
<6>ACPI: Subsystem revision 20040715
<6>ACPI: Interpreter enabled
<6>ACPI: Using PIC for interrupt routing
<6>ACPI: PCI Root Bridge [PCI0] (00:00)
<4>PCI: Probing PCI hardware (bus 00)
<4>Uncovering SIS963 that hid as a SIS503 (compatible=1)
<6>Enabling SiS 96x SMBus.
<7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
<6>ACPI: Power Resource [URP1] (off)
<6>ACPI: Power Resource [URP2] (off)
<6>ACPI: Power Resource [FDDP] (off)
<6>ACPI: Power Resource [LPTP] (off)
<4>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 *11 12 14 15)
<4>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 *11 12 14 15)
<4>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 *10 11 12 14 15)
<4>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 *10 11 12 14 15)
<4>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 *10 11 12 14 15)
<4>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 *10 11 12 14 15)
<4>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 *11 12 14 15)
<4>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 *10 11 12 14 15)
<6>Linux Plug and Play Support v0.97 (c) Adam Belay
<6>PCI: Using ACPI for IRQ routing
<4>ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
<6>ACPI: PCI interrupt 0000:00:02.1 -> GSI 11 (level, low) -> IRQ 11
<4>ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 10
<6>ACPI: PCI interrupt 0000:00:03.0[A] -> GSI 10 (level, low) -> IRQ 10
<4>ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 10
<6>ACPI: PCI interrupt 0000:00:03.1[B] -> GSI 10 (level, low) -> IRQ 10
<4>ACPI: PCI Interrupt Link [LNKG] enabled at IRQ 11
<6>ACPI: PCI interrupt 0000:00:03.2[C] -> GSI 11 (level, low) -> IRQ 11
<4>ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 10
<6>ACPI: PCI interrupt 0000:00:03.3[D] -> GSI 10 (level, low) -> IRQ 10
<4>ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 10
<6>ACPI: PCI interrupt 0000:00:08.0[A] -> GSI 10 (level, low) -> IRQ 10
<4>ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
<6>ACPI: PCI interrupt 0000:00:09.0[A] -> GSI 11 (level, low) -> IRQ 11
<6>ACPI: PCI interrupt 0000:00:0a.0[A] -> GSI 11 (level, low) -> IRQ 11
<6>ACPI: PCI interrupt 0000:00:0a.1[A] -> GSI 11 (level, low) -> IRQ 11
<4>ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10
<6>ACPI: PCI interrupt 0000:00:0b.0[A] -> GSI 10 (level, low) -> IRQ 10
<6>ACPI: PCI interrupt 0000:00:0f.0[A] -> GSI 10 (level, low) -> IRQ 10
<6>ACPI: PCI interrupt 0000:01:00.0[A] -> GSI 11 (level, low) -> IRQ 11
<4>TC classifier action (bugs to netdev@oss.sgi.com cc hadi@cyberus.ca)
<6>apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
<5>apm: overridden by ACPI.
<6>audit: initializing netlink socket (disabled)
<3>audit(1198336054.766:0): initialized
<4>highmem bounce pool size: 64 pages
<4>Total HugeTLB memory allocated, 0
<5>VFS: Disk quotas dquot_6.5.1
<4>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
<6>Initializing Cryptographic API
<6>vesafb: framebuffer at 0xc0000000, mapped to 0xf8880000, using 12288k, total131072k
<6>vesafb: mode is 1024x768x32, linelength=4096, pages=1
<6>vesafb: protected mode interface info at c000:d500
<6>vesafb: scrolling: redraw
<6>vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
<4>Console: switching to colour frame buffer device 128x48
<6>fb0: VESA VGA frame buffer device
<6>isapnp: Scanning for PnP cards...
<6>isapnp: No Plug & Play device found
<6>Real Time Clock Driver v1.12
<6>serio: i8042 KBD port at 0x60,0x64 irq 1
<6>serio: i8042 AUX port at 0x60,0x64 irq 12
<6>Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled
<4>ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
<4>ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
<4>Using anticipatory io scheduler
<6>Floppy drive(s): fd0 is 1.44M
<6>FDC 0 is a post-1991 82077
<4>RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize
<6>loop: loaded (max 8 devices)
<6>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
<6>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
<6>SIS5513: IDE controller at PCI slot 0000:00:02.5
<6>SIS5513: chipset revision 0
<6>SIS5513: not 100%% native mode: will probe irqs later
<6>SIS5513: SiS 962/963 MuTIOL IDE UDMA133 controller
<6> ide0: BM-DMA at 0xff00-0xff07, BIOS settings: hda:DMA, hdb:DMA
<6> ide1: BM-DMA at 0xff08-0xff0f, BIOS settings: hdc:DMA, hdd:DMA
<7>Probing IDE interface ide0...
<4>hda: ST3120026A, ATA DISK drive
<4>hdb: HDT722525DLAT80, ATA DISK drive
<4>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
<7>Probing IDE interface ide1...
<4>hdc: HL-DT-ST DVDRAM GSA-H12N, ATAPI CD/DVD-ROM drive
<4>hdd: CW088D ATAPI CD-R/RW, ATAPI CD/DVD-ROM drive
<4>ide1 at 0x170-0x177,0x376 on irq 15
<7>Probing IDE interface ide2...
<7>ide2: Wait for ready failed before probe !
<7>Probing IDE interface ide3...
<7>ide3: Wait for ready failed before probe !
<7>Probing IDE interface ide4...
<7>ide4: Wait for ready failed before probe !
<7>Probing IDE interface ide5...
<7>ide5: Wait for ready failed before probe !
<6>hda: max request size: 1024KiB
<6>hda: 234441648 sectors (120034 MB) w/8192KiB Cache, CHS=16383/255/63, UDMA(100)
<7>hda: cache flushes supported
<6> hda: hda1 hda2 hda3 < hda5 hda6 hda7 hda8 hda9 >
<6>hdb: max request size: 1024KiB
<6>hdb: 488397168 sectors (250059 MB) w/7674KiB Cache, CHS=30401/255/63, UDMA(133)
<7>hdb: cache flushes supported
<6> hdb: hdb1 hdb2 hdb3 hdb4 < hdb5 hdb6 >
<4>ide-floppy driver 0.99.newide
<6>mice: PS/2 mouse device common for all mice
<6>input: AT Translated Set 2 keyboard on isa0060/serio0
<6>alps.c: E6 report: 00 00 28
<6>input: ImExPS/2 Generic Explorer Mouse on isa0060/serio1
<6>input: PC Speaker
<6>md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
<6>NET: Registered protocol family 2
<6>IP: routing cache hash table of 16384 buckets, 128Kbytes
<6>TCP: Hash tables configured (established 524288 bind 65536)
<6>NET: Registered protocol family 1
<6>NET: Registered protocol family 8
<6>NET: Registered protocol family 20
<7>PM: Reading pmdisk image.
<7>swsusp: Resume From Partition: /dev/hda5
<7><3>swsusp: Invalid partition type.
<7>pmdisk: Error -22 resuming
<7>PM: Resume from disk failed.
<6>ACPI: (supports S0 S3 S4 S5)
<4>ACPI wakeup devices:
<4>PCI0 PS2M PS2K UAR1 UAR2 USB1 USB2 USB3 USB4 S139 LAN MDM AUD
<6>md: Autodetecting RAID arrays.
<6>md: autorun ...
<6>md: ... autorun DONE.
<5>RAMDISK: Compressed image found at block 0
<4>VFS: Mounted root (ext2 filesystem).
<5>ReiserFS: hda6: found reiserfs format "3.6" with standard journal
<5>ReiserFS: hda6: using ordered data mode
<4>reiserfs: using flush barriers
<5>ReiserFS: hda6: journal params: device hda6, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
<5>ReiserFS: hda6: checking transaction log (hda6)
<5>ReiserFS: hda6: Using r5 hash to sort names
<4>VFS: Mounted root (reiserfs filesystem) readonly.
<5>Trying to move old root to /initrd ... failed
<5>Unmounting old root
<5>Trying to free ramdisk memory ... okay
<6>Freeing unused kernel memory: 212k freed
<4>reiserfs: enabling write barrier flush mode
<6>usbcore: registered new driver usbfs
<6>usbcore: registered new driver hub
<4>rt2500: unsupported module, tainting kernel.
<6>ACPI: PCI interrupt 0000:00:09.0[A] -> GSI 11 (level, low) -> IRQ 11
<6>rt2500 1.1.0 BETA4 2006/06/18 http://rt2x00.serialmonkey.com
<6>md: Autodetecting RAID arrays.
<6>md: autorun ...
<6>md: ... autorun DONE.
<6>device-mapper: 4.1.0-ioctl (2003-12-10) initialised: dm@uk.sistina.com
<7>evdev_connect: evdev c20edd80 handle c20edd9c name event0
<7>evdev_connect: evdev c20edb80 handle c20edb9c name event1
<7>evdev_connect: evdev c20eda80 handle c20eda9c name event2
<7>ieee1394: Initialized config rom entry `ip1394'
[B]<6>ohci1394: $Rev: 1223 $ Ben Collins <bcollins@debian.org>
<6>ACPI: PCI interrupt 0000:00:08.0[A] -> GSI 10 (level, low) -> IRQ 10
<6>ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[10] MMIO=[dfffa800-dfffafff]Max Packet=[2048]
<6>Linux agpgart interface v0.100 (c) Dave Jones
<6>agpgart: Detected SiS 648 chipset
<6>agpgart: Maximum main memory to use for agp memory: 1919M
<6>agpgart: AGP aperture is 64M @ 0xe0000000
<7>ieee1394: Host added: ID:BUS[0-00:1023] GUID[0005ce0027006213]
<7>ohci_hcd: 2004 Feb 02 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
<6>ACPI: PCI interrupt 0000:00:03.0[A] -> GSI 10 (level, low) -> IRQ 10
<6>ohci_hcd 0000:00:03.0: OHCI Host Controller
<6>ohci_hcd 0000:00:03.0: irq 10, pci mem f9604000
<6>ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 1
<6>usb usb1: Product: OHCI Host Controller
<6>usb usb1: Manufacturer: Linux 2.6.8-24-default ohci_hcd
<6>usb usb1: SerialNumber: 0000:00:03.0
<6>hub 1-0:1.0: USB hub found
<6>hub 1-0:1.0: 2 ports detected
<6>ACPI: PCI interrupt 0000:00:03.1[B] -> GSI 10 (level, low) -> IRQ 10
<6>ohci_hcd 0000:00:03.1: OHCI Host Controller
<6>ohci_hcd 0000:00:03.1: irq 10, pci mem f9606000
<6>ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 2
<6>usb usb2: Product: OHCI Host Controller
<6>usb usb2: Manufacturer: Linux 2.6.8-24-default ohci_hcd
<6>usb usb2: SerialNumber: 0000:00:03.1
<6>hub 2-0:1.0: USB hub found
<6>hub 2-0:1.0: 2 ports detected
<6>ACPI: PCI interrupt 0000:00:03.2[C] -> GSI 11 (level, low) -> IRQ 11
<6>ohci_hcd 0000:00:03.2: OHCI Host Controller
<6>ohci_hcd 0000:00:03.2: irq 11, pci mem f9608000
<6>ohci_hcd 0000:00:03.2: new USB bus registered, assigned bus number 3
<6>usb usb3: Product: OHCI Host Controller
<6>usb usb3: Manufacturer: Linux 2.6.8-24-default ohci_hcd
<6>usb usb3: SerialNumber: 0000:00:03.2
<6>hub 3-0:1.0: USB hub found
<6>hub 3-0:1.0: 2 ports detected
<6>ACPI: PCI interrupt 0000:00:03.3[D] -> GSI 10 (level, low) -> IRQ 10
<6>ehci_hcd 0000:00:03.3: EHCI Host Controller
<6>ehci_hcd 0000:00:03.3: irq 10, pci mem f9610000
<6>ehci_hcd 0000:00:03.3: new USB bus registered, assigned bus number 4
<7>PCI: cache line size of 128 is not supported by device 0000:00:03.3
<6>ehci_hcd 0000:00:03.3: USB 2.0 enabled, EHCI 1.00, driver 2004-May-10
<6>usb usb4: Product: EHCI Host Controller
<6>usb usb4: Manufacturer: Linux 2.6.8-24-default ehci_hcd
<6>usb usb4: SerialNumber: 0000:00:03.3
<6>hub 4-0:1.0: USB hub found
<6>hub 4-0:1.0: 6 ports detected
<6>8139too Fast Ethernet driver 0.9.27
<6>ACPI: PCI interrupt 0000:00:0f.0[A] -> GSI 10 (level, low) -> IRQ 10
<6>eth0: RealTek RTL8139 at 0xf9618f00, 00:10:dc:e5:4e:20, IRQ 10
<7>eth0: Identified 8139 chip type 'RTL-8101'
<6>NTFS driver 2.1.17 [Flags: R/O MODULE].
<6>NTFS volume version 3.1.
<6>subfs 0.9
<5>ReiserFS: hda8: found reiserfs format "3.6" with standard journal
<5>ReiserFS: hda8: using ordered data mode
<4>reiserfs: using flush barriers
<5>ReiserFS: hda8: journal params: device hda8, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
<5>ReiserFS: hda8: checking transaction log (hda8)
<5>ReiserFS: hda8: Using r5 hash to sort names
<5>ReiserFS: hdb3: found reiserfs format "3.6" with standard journal
<5>ReiserFS: hdb3: using ordered data mode
<4>reiserfs: using flush barriers
<5>ReiserFS: hdb3: journal params: device hdb3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
<5>ReiserFS: hdb3: checking transaction log (hdb3)
<5>ReiserFS: hdb3: Using r5 hash to sort names
<5>ReiserFS: hdb6: found reiserfs format "3.6" with standard journal
<5>ReiserFS: hdb6: using ordered data mode
<4>reiserfs: using flush barriers
<5>ReiserFS: hdb6: journal params: device hdb6, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
<5>ReiserFS: hdb6: checking transaction log (hdb6)
<5>ReiserFS: hdb6: Using r5 hash to sort names
<5>ReiserFS: hdb5: found reiserfs format "3.6" with standard journal
<5>ReiserFS: hdb5: using ordered data mode
<4>reiserfs: using flush barriers
<5>ReiserFS: hdb5: journal params: device hdb5, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
<5>ReiserFS: hdb5: checking transaction log (hdb5)
<5>ReiserFS: hdb5: Using r5 hash to sort names
Kernel logging (ksyslog) stopped.
Kernel log daemon terminating.
Boot logging started on /dev/tty1(/dev/console) at Sat Dec 22 16:07:45 2007
<notice>run boot scripts (setserial boot.proc)
Configuring serial ports...
/dev/ttyS0 at 0x03f8 (irq = 4) is a 16550A
/dev/ttyS1 at 0x02f8 (irq = 3) is a 16550A
Configured serial ports
done<notice>exit status of (setserial boot.proc) is (0 0)
<notice>run boot scripts (boot.shm)
Mounting shared memory FS on /dev/shmdone
<notice>exit status of (boot.shm) is (0)
<notice>run boot scripts (boot.rootfsck)
Checking root file system...
fsck 1.35 (28-Feb-2004)
Reiserfs super block in block 16 on 0x306 of format 3.6 with standard journal
Blocks (total/free): 2622592/843841 by 4096 bytes
Filesystem is clean
Filesystem seems mounted read-only. Skipping journal replay.
Checking internal tree..finished
done<notice>exit status of (boot.rootfsck) is (0)
<notice>run boot scripts (boot.hotplug)
Hotplug is already active (disable with NOHOTPLUG=1 at the boot prompt)done
<notice>exit status of (boot.hotplug) is (0)
<notice>run boot scripts (boot.coldplug)
coldplug scanning input: ***done
scanning pci: ****.******WWW*Wdone
scanning usb: done
hwup: Loading module 'rt2500' for device '0'
hwup: Loading module 'rt2500' for device '1'
done
<notice>exit status of (boot.coldplug) is (0)
<notice>run boot scripts (boot.md boot.device-mapper)
Activating device mapper...
Creating /dev/mapper/control character device with major:10 minor:63.
done
<notice>exit status of (boot.md boot.device-mapper) is (0 0)
<notice>run boot scripts (boot.localfs)
Checking file systems...
fsck 1.35 (28-Feb-2004)
Reiserfs super block in block 16 on 0x343 of format 3.6 with standard journal
Blocks (total/free): 3142704/1426589 by 4096 bytes
Filesystem is clean
Replaying journal..
Reiserfs journal '/dev/hdb3' in blocks [18..8211]: 0 transactions replayed
Checking internal tree..finished
Reiserfs super block in block 16 on 0x346 of format 3.6 with standard journal
Blocks (total/free): 526112/517884 by 4096 bytes
Filesystem is clean
Replaying journal..
Reiserfs journal '/dev/hdb6' in blocks [18..8211]: 0 transactions replayed
Checking internal tree..finished
Reiserfs super block in block 16 on 0x345 of format 3.6 with standard journal
Blocks (total/free): 389568/242758 by 4096 bytes
Filesystem is clean
Replaying journal..
Reiserfs journal '/dev/hdb5' in blocks [18..8211]: 0 transactions replayed
Checking internal tree..finished
doneSetting up kernel module dependencies (if required)done
Mounting local file systems...
proc on /proc type proc (rw)
tmpfs on /dev/shm type tmpfs (rw)
devpts on /dev/pts type devpts (rw,mode=0620,gid=5)
/dev/hda1 on /mnt/windows_xp_ntfs_hda1 type ntfs (ro,nosuid,nodev,umask=000)
/dev/hda2 on /mnt/windows_xp_fat_hda2 type vfat (rw,noexec,nosuid,nodev,umask=000)
/dev/hdd on /media/cdrecorder type subfs (ro,nosuid,nodev,fs=cdfss,procuid,iocharset=utf8)
/dev/dvd on /media/dvd type subfs (ro,nosuid,nodev,fs=cdfss,procuid,iocharset=utf8)
/dev/fd0 on /media/floppy type subfs (rw,nosuid,nodev,sync,fs=floppyfss,procuid)
/dev/hda8 on /mnt/hda8_kopie_suse9.0 type reiserfs (rw)
/dev/hda9 on /datahda9 type vfat (rw,noexec,nosuid,nodev,umask=000)
/dev/hdc on /media/dvdram type subfs (ro,nosuid,nodev,fs=cdfss,procuid,iocharset=utf8)
/dev/hdb3 on /home type reiserfs (rw)
/dev/hdb6 on /tmp type reiserfs (rw)
/dev/hdb5 on /var type reiserfs (rw)
done<notice>exit status of (boot.localfs) is (0)
<notice>run boot scripts (boot.scpm boot.loadmodules boot.klog)
Loading required kernel modules
doneCreating /var/log/boot.msg
done<notice>killproc: kill(1927,29)
<notice>exit status of (boot.scpm boot.loadmodules boot.klog) is (0 0 0)
<notice>run boot scripts (boot.crypto)
<notice>exit status of (boot.crypto) is (0)
<notice>run boot scripts (boot.restore_permissions boot.pnet boot.idedma)
Restore device permissionsdone
Register IL Executablesdone
Setting up IDE DMA mode
/dev/hdc:
setting using_dma to 1 (on)
setting xfermode to 66 (UltraDMA mode2)
using_dma = 1 (on)
/dev/hdd:
setting using_dma to 1 (on)
setting xfermode to 66 (UltraDMA mode2)
using_dma = 1 (on)
done
<notice>exit status of (boot.restore_permissions boot.pnet boot.idedma) is (0 00)
<notice>run boot scripts (boot.swap)
Activating remaining swap-devices in /etc/fstab...
done<notice>exit status of (boot.swap) is (0)
<notice>run boot scripts (boot.clock)
Setting up the CMOS clockdone
<notice>exit status of (boot.clock) is (0)
<notice>run boot scripts (boot.ldconfig)
Setting up timezone datadone
<notice>exit status of (boot.ldconfig) is (0)
<notice>run boot scripts (boot.sysctl boot.localnet boot.isapnp)
Setting current sysctl status from /etc/sysctl.conf
net.ipv4.icmp_echo_ignore_broadcasts = 1
net.ipv4.conf.all.rp_filter = 1
done
Setting up hostname 'hauptrechner'done
Setting up loopback interface lo
lo IP address: 127.0.0.1/8
done
Cleaning temporary directories /tmpdone
<notice>exit status of (boot.sysctl boot.localnet boot.isapnp) is (0 0 0)
<notice>run boot scripts (boot.ipconfig)
Enabling syn flood protectiondone
Enabling IP forwardingdone
done
System Boot Control: The system has been set up
System Boot Control: Running /etc/init.d/boot.local
done<notice>exit status of (boot.ipconfig) is (0)
<notice>killproc: kill(1927,3)
INIT: Entering runlevel: 5
Boot logging started on /dev/tty1(/dev/console) at Sat Dec 22 15:09:38 2007
Master Resource Control: previous runlevel: N, switching to runlevel: 5
<notice>start services (random isdn hddtemp)
Initializing random number generatordone
Starting hddtemp daemon for /dev/hda<notice>startproc: execve (/usr/sbin/hddtemp) [ /usr/sbin/hddtemp -d -f /etc/hddtemp.db -p 7634 /dev/hda ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 AUTOBOOT=YES COLUMNS=128 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin RUNLEVEL=5 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=48 HOME=/ SHLVL=2 BOOT_IMAGE=SUSE_LINUX_9.2 splash=native SPLASH=no _=/sbin/startproc DAEMON=/usr/sbin/hddtemp ]
done
<notice>exit status of (random isdn hddtemp) is (0 0 0)
<notice>start services (network)
Setting up network interfaces:
lo
lo IP address: 127.0.0.1/8
done eth0 device: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+(rev 10)
eth0 configuration: eth-id-00:10:dc:e5:4e:20
eth0 IP address: 172.16.0.141/16
done ra0 device: RaLink Ralink RT2500 802.11 Cardbus Reference Card (rev 01)
ra0 configuration: wlan-ra0
ERROR: WPA-PSK is not supported yet for this device
ra0 (DHCP) . . . . . IP/Netmask: 192.168.178.22 / 255.255.255.0
doneSetting up service network . . . . . . . . . . . . . . . .done
<notice>exit status of (network) is (0)
<notice>start services (syslog)
Starting syslog services<notice>startproc: execve (/sbin/syslogd) [ /sbin/syslogd -a /var/lib/dhcp/dev/log -a /var/lib/named/dev/log -a /var/lib/ntp/dev/log ],[ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 AUTOBOOT=YES COLUMNS=128 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin RUNLEVEL=5 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=48 HOME=/ SHLVL=2 BOOT_IMAGE=SUSE_LINUX_9.2 splash=native SPLASH=no _=/sbin/startproc DAEMON=/sbin/syslogd ]
<notice>startproc: execve (/sbin/klogd) [ /sbin/klogd -c 1 -2 -x ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 AUTOBOOT=YES COLUMNS=128 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin RUNLEVEL=5 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=48 HOME=/ SHLVL=2 BOOT_IMAGE=SUSE_LINUX_9.2 splash=native SPLASH=no _=/sbin/startproc DAEMON=/sbin/klogd ]
done
<notice>exit status of (syslog) is (0)
<notice>start services (ntop nmb)
Starting service ntop
ntop admin password is not yet set. Run
ntop -A -u wwwrun
manually unused
Starting Samba NMB daemon <notice>startproc: execve (/usr/sbin/nmbd) [ /usr/sbin/nmbd -D -s /etc/samba/smb.conf ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 AUTOBOOT=YES COLUMNS=128 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin RUNLEVEL=5 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=48 HOME=/ SHLVL=2 BOOT_IMAGE=SUSE_LINUX_9.2 splash=native SPLASH=no _=/sbin/startproc DAEMON=/usr/sbin/nmbd ]
done
<notice>exit status of (ntop nmb) is (0 0)
<notice>start services (splash_early smbfs smartd resmgr portmap)
Mount SMB/ CIFS File Systems unused
Starting smartd <notice>startproc: execve (/usr/sbin/smartd) [ /usr/sbin/smartd], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 AUTOBOOT=YES COLUMNS=128 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin RUNLEVEL=5 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=48 HOME=/ SHLVL=2 BOOT_IMAGE=SUSE_LINUX_9.2 splash=native SPLASH=no _=/sbin/startproc DAEMON=/usr/sbin/smartd ]
done
Starting resource manager<notice>startproc: execve (/sbin/resmgrd) [ /sbin/resmgrd ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 AUTOBOOT=YES COLUMNS=128 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin RUNLEVEL=5 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=48 HOME=/ SHLVL=2BOOT_IMAGE=SUSE_LINUX_9.2 splash=native SPLASH=no _=/sbin/startproc DAEMON=/sbin/resmgrd ]
done
Starting RPC portmap daemon<notice>startproc: execve (/sbin/portmap) [ /sbin/portmap ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 AUTOBOOT=YES COLUMNS=128 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin RUNLEVEL=5 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=48 HOME=/ SHLVL=2 BOOT_IMAGE=SUSE_LINUX_9.2 splash=native SPLASH=no _=/sbin/startproc DAEMON=/sbin/portmap ]
done
<notice>exit status of (splash_early smbfs smartd resmgr portmap) is (0 6 0 0 0)
<notice>start services (nfsboot)
Starting nfsboot (sm-notify) done
<notice>exit status of (nfsboot) is (0)
<notice>start services (sshd spamd running-kernel privoxy named fbset alsasound)
Starting SSH daemon<notice>startproc: execve (/usr/sbin/sshd) [ /usr/sbin/sshd -o PidFile=/var/run/sshd.init.pid ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 AUTOBOOT=YES COLUMNS=128 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin RUNLEVEL=5 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=48 HOME=/ SHLVL=2 BOOT_IMAGE=SUSE_LINUX_9.2 splash=native SPLASH=no_=/sbin/startproc DAEMON=/usr/sbin/sshd ]
done
Starting spamd <notice>startproc: execve (/usr/sbin/spamd) [ /usr/sbin/spamd -d-c -L ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 AUTOBOOT=YES COLUMNS=128 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin RUNLEVEL=5 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=48 HOME=/ SHLVL=2 BOOT_IMAGE=SUSE_LINUX_9.2 splash=native SPLASH=no _=/sbin/startproc DAEMON=/usr/sbin/spamd ]
done
Starting Privoxydone
Starting name server BIND <notice>startproc: execve (/usr/sbin/named) [ /usr/sbin/named -t /var/lib/named -u named ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 AUTOBOOT=YES COLUMNS=128 PATH=/sbin:/usr/sbin:/bin:/usr/bin RUNLEVEL=5 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=48 checkAndCopyConfigFilesCalled=yes HOME=/ SHLVL=2 BOOT_IMAGE=SUSE_LINUX_9.2 namedConfChecked=yes splash=native SPLASH=no initializeNamedCalled=yes _=/sbin/startproc DAEMON=/usr/sbin/named ]
done
Starting sound driver: es1938done
Restoring the previous sound settingdone
<notice>exit status of (sshd spamd running-kernel privoxy named fbset alsasound) is (0 0 0 0 0 0 0)
<notice>start services (splash powersaved kbd)
loading ACPI modules (ac battery button fan processor thermal ) done
Starting powersaved (accessing ACPI events over acpid) <notice>startproc: execve (/usr/sbin/powersaved) [ /usr/sbin/powersaved -d -x /usr/lib/powersave/scripts -a resmgr -v 3 ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 AUTOBOOT=YES COLUMNS=128 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin RUNLEVEL=5 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=48 HOME=/ SHLVL=2 BOOT_IMAGE=SUSE_LINUX_9.2 splash=native SPLASH=no _=/sbin/startproc DAEMON=/usr/sbin/powersaved ]
Requested buffer size 2048, fragment size 1024
ALSA pcm 'default' set buffer size 2048, period size 1024 bytes
done
TiMidity starting in ALSA server mode
Opening sequencer port: 128:0 128:1 128:2 128:3
Loading keymap qwertz/de-latin1-nodeadkeys.map.gz
doneLoading compose table latin1.adddone
Start Unicode mode
doneLoading console font lat9w-16.psfu -m trivial \033(K
done<notice>exit status of (splash powersaved kbd) is (5 0 0)
<notice>start services (xntpd wwwoffle hwscan)
Try to get initial date and time via NTP from de.pool.ntp.org ntps1.gwdg.de ntps2.gwdg.de ntps3.gwdg.dedone
Starting network time protocol daemon (NTPD)done
<notice>startproc: execve (/usr/sbin/ntpd) [ /usr/sbin/ntpd -p /var/lib/ntp/var/run/ntp/ntpd.pid -u ntp -i /var/lib/ntp ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 AUTOBOOT=YES COLUMNS=128 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin RUNLEVEL=5 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=48 HOME=/ SHLVL=2 BOOT_IMAGE=SUSE_LINUX_9.2 splash=native SPLASH=no _=/sbin/startproc DAEMON=/usr/sbin/ntpd ]
Starting service wwwoffle<notice>startproc: execve (/usr/sbin/wwwoffled) [ /usr/sbin/wwwoffled -c /etc/wwwoffle/wwwoffle.conf ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 AUTOBOOT=YES COLUMNS=128 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin RUNLEVEL=5 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=48 HOME=/ SHLVL=2 BOOT_IMAGE=SUSE_LINUX_9.2 splash=native SPLASH=no _=/sbin/startproc DAEMON=/usr/sbin/wwwoffled ]
done
Starting hardware scan on boot<notice>exit status of (xntpd wwwoffle hwscan) is(0 0 0)
<notice>start services (cups)
Starting cupsd<notice>startproc: execve (/usr/sbin/cupsd) [ /usr/sbin/cupsd ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 AUTOBOOT=YES COLUMNS=128 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin RUNLEVEL=5 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=48 HOME=/ SHLVL=2 BOOT_IMAGE=SUSE_LINUX_9.2 splash=native SPLASH=no _=/sbin/startproc DAEMON=/usr/sbin/cupsd ]
done
<notice>exit status of (cups) is (0)
<notice>start services (smb nscd)
Starting Samba SMB daemon <notice>startproc: execve (/usr/sbin/smbd) [ /usr/sbin/smbd -D -s /etc/samba/smb.conf ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh TMPDIR=/var/tmp INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 AUTOBOOT=YES COLUMNS=128 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin RUNLEVEL=5 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=48 HOME=/ SHLVL=2 BOOT_IMAGE=SUSE_LINUX_9.2 splash=native SPLASH=no _=/sbin/startproc DAEMON=/usr/sbin/smbd ]
done
Starting Name Service Cache Daemon<notice>startproc: execve (/usr/sbin/nscd) [ /usr/sbin/nscd ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 AUTOBOOT=YES COLUMNS=128 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin RUNLEVEL=5 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=48 HOME=/ SHLVL=2 BOOT_IMAGE=SUSE_LINUX_9.2 splash=native SPLASH=no _=/sbin/startproc DAEMON=/usr/sbin/nscd ]
done
<notice>exit status of (smb nscd) is (0 0)
<notice>start services (xdm postfix nfsserver)
Starting service kdm<notice>startproc: execve (/opt/kde3/bin/kdm) [ /opt/kde3/bin/kdm ], [ LC_MONETARY= CONSOLE=/dev/console TERM=linux SHELL=/bin/sh LC_NUMERIC= QTDIR=/usr/lib/qt3 LC_ALL= INIT_VERSION=sysvinit-2.85 KDEROOTHOME=/root/.kdm REDIRECT=/dev/tty1 AUTOBOOT=YES COLUMNS=128 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin LC_MESSAGES= RUNLEVEL=5 LC_COLLATE= PWD=/ SPLASHCFG= LANG=de_DE.UTF-8 PREVLEVEL=N LINES=48 HOME=/ SHLVL=2 BOOT_IMAGE=SUSE_LINUX_9.2 XCURSOR_THEME=crystalwhite WINDOWMANAGER=/usr/X11R6/bin/kde LC_CTYPE=de_DE.UTF-8 splash=native SPLASH=no LC_TIME= _=/sbin/startproc DAEMON=/opt/kde3/bin/kdm ]
done
Starting mail service (Postfix)done
Starting kernel based NFS server<notice>startproc: execve (/usr/sbin/rpc.mountd) [ /usr/sbin/rpc.mountd ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 AUTOBOOT=YES COLUMNS=128 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin RUNLEVEL=5 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=48 HOME=/ SHLVL=2 BOOT_IMAGE=SUSE_LINUX_9.2 splash=native SPLASH=no _=/sbin/startproc DAEMON=/usr/sbin/rpc.mountd ]
done
<notice>exit status of (xdm postfix nfsserver) is (0 0 0)
<notice>start services (xinetd cron)
Starting INET services. (xinetd)<notice>startproc: execve (/usr/sbin/xinetd) [ /usr/sbin/xinetd ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 AUTOBOOT=YES COLUMNS=128 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin RUNLEVEL=5 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=48 HOME=/ SHLVL=2 BOOT_IMAGE=SUSE_LINUX_9.2 splash=native SPLASH=no _=/sbin/startproc DAEMON=/usr/sbin/xinetd ]
done
Starting CRON daemon<notice>startproc: execve (/usr/sbin/cron) [ /usr/sbin/cron], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 AUTOBOOT=YES COLUMNS=128 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin RUNLEVEL=5 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=48 HOME=/ SHLVL=2 BOOT_IMAGE=SUSE_LINUX_9.2 splash=native SPLASH=no _=/sbin/startproc DAEMON=/usr/sbin/cron ]
done
<notice>exit status of (xinetd cron) is (0 0)
<notice>start services (sensors)
<notice>exit status of (sensors) is (0)
Master Resource Control: runlevel 5 has been reached
Skipped services in runlevel 5: smbfs splash
<notice>killproc: kill(4147,3)
test@hauptrechner:~>
Mit freundlichem Gruß
N