florian86
21.11.07, 21:57
Hallo
Der sound Funktioniert nicht
wüste nicht wieso
Erst Funktionierte Das mikro nicht in Teamspeak
haben dann alsaconf gemacht
dann hörten wir nichtsmehr
hwinfo
ergab dies
22: PCI 1f.5: 0401 Multimedia audio controller
[Created at pci.301]
UDI: /org/freedesktop/Hal/devices/pci_8086_24d5
Unique ID: W60f.2FvAULdFtSB
SysFS ID: /devices/pci0000:00/0000:00:1f.5
SysFS BusID: 0000:00:1f.5
Hardware Class: sound
Model: "Micro-Star International 865PE Neo2 (MS-6728)"
Vendor: pci 0x8086 "Intel Corporation"
Device: pci 0x24d5 "82801EB/ER (ICH5/ICH5R) AC'97 Audio Controller"
SubVendor: pci 0x1462 "Micro-Star International Co., Ltd."
SubDevice: pci 0x7280 "865PE Neo2 (MS-6728)"
Revision: 0x02
Driver: "Intel ICH"
Driver Modules: "snd_intel8x0"
I/O Ports: 0xdc00-0xdcff (rw)
I/O Ports: 0xd800-0xd83f (rw)
Memory Range: 0xf7fffa00-0xf7fffbff (rw,non-prefetchable)
Memory Range: 0xf7fff900-0xf7fff9ff (rw,non-prefetchable)
IRQ: 20 (8348 events)
Module Alias: "pci:v00008086d000024D5sv00001462sd00007280bc04sc01 i00"
Driver Info #0:
Driver Status: snd_intel8x0 is active
Driver Activation Cmd: "modprobe snd_intel8x0"
Config Status: cfg=no, avail=yes, need=no, active=unknown
Wieso steht ganz unten active=unknown?
Worüber kann es noch legen
Disturbtion = SuSE 10.3
Regler sind oben
Danke im Vorraus
MFG Florain
Der sound Funktioniert nicht
wüste nicht wieso
Erst Funktionierte Das mikro nicht in Teamspeak
haben dann alsaconf gemacht
dann hörten wir nichtsmehr
hwinfo
ergab dies
22: PCI 1f.5: 0401 Multimedia audio controller
[Created at pci.301]
UDI: /org/freedesktop/Hal/devices/pci_8086_24d5
Unique ID: W60f.2FvAULdFtSB
SysFS ID: /devices/pci0000:00/0000:00:1f.5
SysFS BusID: 0000:00:1f.5
Hardware Class: sound
Model: "Micro-Star International 865PE Neo2 (MS-6728)"
Vendor: pci 0x8086 "Intel Corporation"
Device: pci 0x24d5 "82801EB/ER (ICH5/ICH5R) AC'97 Audio Controller"
SubVendor: pci 0x1462 "Micro-Star International Co., Ltd."
SubDevice: pci 0x7280 "865PE Neo2 (MS-6728)"
Revision: 0x02
Driver: "Intel ICH"
Driver Modules: "snd_intel8x0"
I/O Ports: 0xdc00-0xdcff (rw)
I/O Ports: 0xd800-0xd83f (rw)
Memory Range: 0xf7fffa00-0xf7fffbff (rw,non-prefetchable)
Memory Range: 0xf7fff900-0xf7fff9ff (rw,non-prefetchable)
IRQ: 20 (8348 events)
Module Alias: "pci:v00008086d000024D5sv00001462sd00007280bc04sc01 i00"
Driver Info #0:
Driver Status: snd_intel8x0 is active
Driver Activation Cmd: "modprobe snd_intel8x0"
Config Status: cfg=no, avail=yes, need=no, active=unknown
Wieso steht ganz unten active=unknown?
Worüber kann es noch legen
Disturbtion = SuSE 10.3
Regler sind oben
Danke im Vorraus
MFG Florain