openSUSE 10.3 (c't) KDE Desktop startet nicht

[IZazen]

Hallo, Leute.

Ich habe die c't-Version von openSUSE 10.3 per Aktualisierung von 10.1 aufgespielt.

Leider startet SUSE 10.3 jetzt nur im Textmodus - und fragt nach Username und Passwort.

Wie bringe ich openSUSE 10.3 bei, künftig ohne Extra-Aufforderung den KDE-Desktop zu starten (den habe ich im Verlauf der Aktualisierung ausgewählt)?

Gruß
IZazen

[Ayron]

Es könnte vielleicht sein, dass du im runlevel 3 startest. Gib mal "sudo init 5" ein.
Sollte dies helfen, dann änderst du in der /etc/inittab die Zeile
id:3:initdefault:
in
id:5:initdefault:

Falls da schon "id:5:initdefault:" steht, könnte es sein, dass du im Bootloader grub am Ende des Kernel-Parameters eine 3 stehen hast. Mach die weg.

Gruß, Ayron

[IZazen]

Hallo, danke für deine Antwort.

Die /etc/inittab enthält schon den Eintrag id:5:initdefault:

Die Bootparameter im Grub lassen mich jedoch ratlos. Da steht:

root (hd0,6)
kernel /boot/vmlinuz-2.6.22.9-0.4-default root=/dev/disk/by-id/scsi-Sinitrd /boot/initrd-2.6.22.9-0.4-default

Ist das so OK?

Ich habe den Verdacht, da müsse noch ausdrücklich stehen, dass der grafische Anmelde-Loggin erscheinen muss. Richtig?

Gruß
IZazen

[Toobles]

Der Anmeldemanager sollte im RL5 eigentlich von alleine gestartet werden.

Poste mal bitte /etc/X11/xorg.conf und /var/log/Xorg.0.log

[gadget]

Die Bootparameter im Grub lassen mich jedoch ratlos. Da steht:

root (hd0,6)
kernel /boot/vmlinuz-2.6.22.9-0.4-default root=/dev/disk/by-id/scsi-Sinitrd /boot/initrd-2.6.22.9-0.4-default

Ist das so OK?

Ich habe den Verdacht, da müsse noch ausdrücklich stehen, dass der grafische Anmelde-Loggin erscheinen muss. Richtig?
Nein. Die Einträge müssten ok sein. Ich denke eher, dass Toobles Recht hat, wenn er dich um die /var/log/Xorg.0.log bittet ;)

[IZazen]

Hallo. Hier ist zunächst
/etc/X11/xorg.conf



X Window System Version 7.2.0
Release Date: Wed Oct 3 20:49:29 UTC 2007
X Protocol Version 11, Revision 0, Release 7.2
Build Operating System: openSUSE SUSE LINUX
Current Operating System: Linux Nestor 2.6.22.9-0.4-default #1 SMP 2007/10/05 21:32:04 UTC i686
Build Date: 03 October 2007
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sat Oct 20 22:23:10 2007
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Layout[all]"
(**) |-->Screen "Screen[0]" (0)
(**) | |-->Monitor "Monitor[0]"
(**) | |-->Device "Device[0]"
(**) |-->Input Device "Keyboard[0]"
(**) |-->Input Device "Mouse[1]"
(WW) The directory "/usr/share/fonts/local" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/PEX" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/latin2/misc" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/latin2/75dpi" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/latin2/100dpi" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/latin2/Type1" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/latin7/75dpi" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/baekmuk" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/japanese" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/kwintv" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/CID" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/ucs/misc" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/ucs/75dpi" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/ucs/100dpi" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/hellas/misc" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/hellas/75dpi" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/hellas/100dpi" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/hellas/Type1" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/misc/sgi" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/xtest" does not exist.
Entry deleted from font path.
(**) FontPath set to:
/usr/share/fonts/misc:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/Type1,
/usr/share/fonts/URW,
/usr/share/fonts/Speedo,
/usr/share/fonts/cyrillic,
/usr/share/fonts/truetype,
/usr/share/fonts/uni:unscaled,
/opt/kde3/share/fonts
(==) RgbPath set to "/usr/share/X11/rgb"
(**) Input device list set to "/dev/gpmdata,/dev/input/mice"
(==) ModulePath set to "/usr/lib/xorg/modules/updates,/usr/lib/xorg/modules"
(**) Option "AllowMouseOpenFail" "on"
(**) Option "Xinerama" "off"
(II) Open ACPI successful (/var/run/acpid.socket)
(II) Loader magic: 0x81e6560
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.3
X.Org Video Driver: 1.2
X.Org XInput driver : 0.7
X.Org Server Extension : 0.3
X.Org Font Renderer : 0.5
(II) Loader running on linux
(II) LoadModule: "pcidata"
(II) Loading /usr/lib/xorg/modules//libpcidata.so
(II) Module pcidata: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 1.0.0
ABI class: X.Org Video Driver, version 1.2
(--) using VT number 7

(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 10de,005e card 0000,0000 rev a3 class 05,80,00 hdr 00
(II) PCI: 00:01:0: chip 10de,0050 card 1043,815a rev a3 class 06,01,00 hdr 80
(II) PCI: 00:01:1: chip 10de,0052 card 1043,815a rev a2 class 0c,05,00 hdr 80
(II) PCI: 00:02:0: chip 10de,005a card 1043,815a rev a2 class 0c,03,10 hdr 80
(II) PCI: 00:02:1: chip 10de,005b card 1043,815a rev a3 class 0c,03,20 hdr 80
(II) PCI: 00:06:0: chip 10de,0053 card f043,815a rev f2 class 01,01,8a hdr 00
(II) PCI: 00:07:0: chip 10de,0054 card 1043,815a rev f3 class 01,01,85 hdr 00
(II) PCI: 00:08:0: chip 10de,0055 card 1043,815a rev f3 class 01,01,85 hdr 00
(II) PCI: 00:09:0: chip 10de,005c card 0000,0000 rev a2 class 06,04,01 hdr 01
(II) PCI: 00:0a:0: chip 10de,0057 card 1043,8141 rev a3 class 06,80,00 hdr 00
(II) PCI: 00:0b:0: chip 10de,005d card 0000,0000 rev a3 class 06,04,00 hdr 01
(II) PCI: 00:0c:0: chip 10de,005d card 0000,0000 rev a3 class 06,04,00 hdr 01
(II) PCI: 00:0d:0: chip 10de,005d card 0000,0000 rev a3 class 06,04,00 hdr 01
(II) PCI: 00:0e:0: chip 10de,005d card 0000,0000 rev a3 class 06,04,00 hdr 01
(II) PCI: 00:18:0: chip 1022,1100 card 0000,0000 rev 00 class 06,00,00 hdr 80
(II) PCI: 00:18:1: chip 1022,1101 card 0000,0000 rev 00 class 06,00,00 hdr 80
(II) PCI: 00:18:2: chip 1022,1102 card 0000,0000 rev 00 class 06,00,00 hdr 80
(II) PCI: 00:18:3: chip 1022,1103 card 0000,0000 rev 00 class 06,00,00 hdr 80
(II) PCI: 01:00:0: chip 10de,0140 card 0000,0000 rev a2 class 03,00,00 hdr 00
(II) PCI: 05:07:0: chip 13f6,0111 card 153b,1144 rev 10 class 04,01,00 hdr 00
(II) PCI: 05:0b:0: chip 104c,8023 card 1043,808b rev 00 class 0c,00,10 hdr 00
(II) PCI: 05:0c:0: chip 11ab,4320 card 1043,811a rev 13 class 02,00,00 hdr 00
(II) PCI: End of PCI scan
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:1:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(II) Subtractive PCI-to-PCI bridge:
(II) Bus 5: bridge is at (0:9:0), (0,5,5), BCTRL: 0x0202 (VGA_EN is cleared)
(II) Bus 5 I/O range:
[0] -1 0 0x0000a000 - 0x0000afff (0x1000) IX[B]
(II) Bus 5 non-prefetchable memory range:
[0] -1 0 0xd0000000 - 0xd1ffffff (0x2000000) MX[B]
(II) Bus 5 prefetchable memory range:
[0] -1 0 0x50000000 - 0x500fffff (0x100000) MX[B]
(II) PCI-to-PCI bridge:
(II) Bus 4: bridge is at (0:11:0), (0,4,4), BCTRL: 0x0002 (VGA_EN is cleared)
(II) PCI-to-PCI bridge:
(II) Bus 3: bridge is at (0:12:0), (0,3,3), BCTRL: 0x0002 (VGA_EN is cleared)
(II) PCI-to-PCI bridge:
(II) Bus 2: bridge is at (0:13:0), (0,2,2), BCTRL: 0x0002 (VGA_EN is cleared)
(II) PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:14:0), (0,1,1), BCTRL: 0x000a (VGA_EN is set)
(II) Bus 1 non-prefetchable memory range:
[0] -1 0 0xc8000000 - 0xcfffffff (0x8000000) MX[B]
(II) Bus 1 prefetchable memory range:
[0] -1 0 0xc0000000 - 0xc7ffffff (0x8000000) MX[B]
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:24:0), (0,0,5), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 0 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(--) PCI:*(1:0:0) nVidia Corporation NV43 [GeForce 6600 GT] rev 162, Mem @ 0xc8000000/26, 0xc0000000/27, 0xcc000000/24
(II) Addressable bus resource ranges are
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
[1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) OS-reported resource ranges:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[5] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) Active PCI resource ranges:
[0] -1 0 0xd1000000 - 0xd1003fff (0x4000) MX[B]
[1] -1 0 0xd1004000 - 0xd1007fff (0x4000) MX[B]
[2] -1 0 0xd1008000 - 0xd10087ff (0x800) MX[B]
[3] -1 0 0xd2000000 - 0xd2000fff (0x1000) MX[B]
[4] -1 0 0xd2001000 - 0xd2001fff (0x1000) MX[B]
[5] -1 0 0xd2002000 - 0xd2002fff (0x1000) MX[B]
[6] -1 0 0xfeb00000 - 0xfeb000ff (0x100) MX[B]
[7] -1 0 0xd2003000 - 0xd2003fff (0x1000) MX[B]
[8] -1 0 0xcc000000 - 0xccffffff (0x1000000) MX[B](B)
[9] -1 0 0xc0000000 - 0xc7ffffff (0x8000000) MX[B](B)
[10] -1 0 0xc8000000 - 0xcbffffff (0x4000000) MX[B](B)
[11] -1 0 0x0000a400 - 0x0000a4ff (0x100) IX[B]
[12] -1 0 0x0000a000 - 0x0000a0ff (0x100) IX[B]
[13] -1 0 0x0000b000 - 0x0000b007 (0x8) IX[B]
[14] -1 0 0x0000c400 - 0x0000c40f (0x10) IX[B]
[15] -1 0 0x00000b60 - 0x00000b63 (0x4) IX[B]
[16] -1 0 0x00000960 - 0x00000967 (0x8) IX[B]
[17] -1 0 0x00000be0 - 0x00000be3 (0x4) IX[B]
[18] -1 0 0x000009e0 - 0x000009e7 (0x8) IX[B]
[19] -1 0 0x0000d800 - 0x0000d80f (0x10) IX[B]
[20] -1 0 0x00000b70 - 0x00000b73 (0x4) IX[B]
[21] -1 0 0x00000970 - 0x00000977 (0x8) IX[B]
[22] -1 0 0x00000bf0 - 0x00000bf3 (0x4) IX[B]
[23] -1 0 0x000009f0 - 0x000009f7 (0x8) IX[B]
[24] -1 0 0x0000f000 - 0x0000f00f (0x10) IX[B]
[25] -1 0 0x00004c40 - 0x00004c7f (0x40) IX[B]
[26] -1 0 0x00004c00 - 0x00004c3f (0x40) IX[B]
[27] -1 0 0x0000dc00 - 0x0000dc1f (0x20) IX[B]
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0 0xd1000000 - 0xd1003fff (0x4000) MX[B]
[1] -1 0 0xd1004000 - 0xd1007fff (0x4000) MX[B]
[2] -1 0 0xd1008000 - 0xd10087ff (0x800) MX[B]
[3] -1 0 0xd2000000 - 0xd2000fff (0x1000) MX[B]
[4] -1 0 0xd2001000 - 0xd2001fff (0x1000) MX[B]
[5] -1 0 0xd2002000 - 0xd2002fff (0x1000) MX[B]
[6] -1 0 0xfeb00000 - 0xfeb000ff (0x100) MX[B]
[7] -1 0 0xd2003000 - 0xd2003fff (0x1000) MX[B]
[8] -1 0 0xcc000000 - 0xccffffff (0x1000000) MX[B](B)
[9] -1 0 0xc0000000 - 0xc7ffffff (0x8000000) MX[B](B)
[10] -1 0 0xc8000000 - 0xcbffffff (0x4000000) MX[B](B)
[11] -1 0 0x0000a400 - 0x0000a4ff (0x100) IX[B]
[12] -1 0 0x0000a000 - 0x0000a0ff (0x100) IX[B]
[13] -1 0 0x0000b000 - 0x0000b007 (0x8) IX[B]
[14] -1 0 0x0000c400 - 0x0000c40f (0x10) IX[B]
[15] -1 0 0x00000b60 - 0x00000b63 (0x4) IX[B]
[16] -1 0 0x00000960 - 0x00000967 (0x8) IX[B]
[17] -1 0 0x00000be0 - 0x00000be3 (0x4) IX[B]
[18] -1 0 0x000009e0 - 0x000009e7 (0x8) IX[B]
[19] -1 0 0x0000d800 - 0x0000d80f (0x10) IX[B]
[20] -1 0 0x00000b70 - 0x00000b73 (0x4) IX[B]
[21] -1 0 0x00000970 - 0x00000977 (0x8) IX[B]
[22] -1 0 0x00000bf0 - 0x00000bf3 (0x4) IX[B]
[23] -1 0 0x000009f0 - 0x000009f7 (0x8) IX[B]
[24] -1 0 0x0000f000 - 0x0000f00f (0x10) IX[B]
[25] -1 0 0x00004c40 - 0x00004c7f (0x40) IX[B]
[26] -1 0 0x00004c00 - 0x00004c3f (0x40) IX[B]
[27] -1 0 0x0000dc00 - 0x0000dc1f (0x20) IX[B]
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[5] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) All system resource ranges:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0xd1000000 - 0xd1003fff (0x4000) MX[B]
[5] -1 0 0xd1004000 - 0xd1007fff (0x4000) MX[B]
[6] -1 0 0xd1008000 - 0xd10087ff (0x800) MX[B]
[7] -1 0 0xd2000000 - 0xd2000fff (0x1000) MX[B]
[8] -1 0 0xd2001000 - 0xd2001fff (0x1000) MX[B]
[9] -1 0 0xd2002000 - 0xd2002fff (0x1000) MX[B]
[10] -1 0 0xfeb00000 - 0xfeb000ff (0x100) MX[B]
[11] -1 0 0xd2003000 - 0xd2003fff (0x1000) MX[B]
[12] -1 0 0xcc000000 - 0xccffffff (0x1000000) MX[B](B)
[13] -1 0 0xc0000000 - 0xc7ffffff (0x8000000) MX[B](B)
[14] -1 0 0xc8000000 - 0xcbffffff (0x4000000) MX[B](B)
[15] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[16] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[17] -1 0 0x0000a400 - 0x0000a4ff (0x100) IX[B]
[18] -1 0 0x0000a000 - 0x0000a0ff (0x100) IX[B]
[19] -1 0 0x0000b000 - 0x0000b007 (0x8) IX[B]
[20] -1 0 0x0000c400 - 0x0000c40f (0x10) IX[B]
[21] -1 0 0x00000b60 - 0x00000b63 (0x4) IX[B]
[22] -1 0 0x00000960 - 0x00000967 (0x8) IX[B]
[23] -1 0 0x00000be0 - 0x00000be3 (0x4) IX[B]
[24] -1 0 0x000009e0 - 0x000009e7 (0x8) IX[B]
[25] -1 0 0x0000d800 - 0x0000d80f (0x10) IX[B]
[26] -1 0 0x00000b70 - 0x00000b73 (0x4) IX[B]
[27] -1 0 0x00000970 - 0x00000977 (0x8) IX[B]
[28] -1 0 0x00000bf0 - 0x00000bf3 (0x4) IX[B]
[29] -1 0 0x000009f0 - 0x000009f7 (0x8) IX[B]
[30] -1 0 0x0000f000 - 0x0000f00f (0x10) IX[B]
[31] -1 0 0x00004c40 - 0x00004c7f (0x40) IX[B]
[32] -1 0 0x00004c00 - 0x00004c3f (0x40) IX[B]
[33] -1 0 0x0000dc00 - 0x0000dc1f (0x20) IX[B]
(II) LoadModule: "freetype"
(II) Loading /usr/lib/xorg/modules//fonts/libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
compiled for 7.2.0, module version = 2.1.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.5
(II) Loading font FreeType
(II) LoadModule: "type1"
(II) Loading /usr/lib/xorg/modules//fonts/libtype1.so
(II) Module type1: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 1.0.2
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.5
(II) Loading font Type1
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules//extensions/libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules//extensions/libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.3
(==) AIGLX disabled
(II) Loading extension GLX
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules//extensions/libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "v4l"
(II) Loading /usr/lib/xorg/modules//drivers/v4l_drv.so
(II) Module v4l: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 0.1.1
ABI class: X.Org Video Driver, version 1.2
(II) LoadModule: "nv"
(II) Loading /usr/lib/xorg/modules//drivers/nv_drv.so
(II) Module nv: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 2.1.3
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 1.2
(II) LoadModule: "kbd"
(II) Loading /usr/lib/xorg/modules//input/kbd_drv.so
(II) Module kbd: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 1.2.2
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 0.7
(II) LoadModule: "mouse"
(II) Loading /usr/lib/xorg/modules//input/mouse_drv.so
(II) Module mouse: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 1.2.2
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 0.7
(II) v4l driver for Video4Linux
(II) NV: driver for NVIDIA chipsets: RIVA 128, RIVA TNT, RIVA TNT2,
Unknown TNT2, Vanta, RIVA TNT2 Ultra, RIVA TNT2 Model 64,
Aladdin TNT2, GeForce 256, GeForce DDR, Quadro, GeForce2 MX/MX 400,
GeForce2 MX 100/200, GeForce2 Go, Quadro2 MXR/EX/Go,
GeForce2 Integrated GPU, GeForce2 GTS, GeForce2 Ti, GeForce2 Ultra,
Quadro2 Pro, GeForce4 MX 460, GeForce4 MX 440, GeForce4 MX 420,
GeForce4 MX 440-SE, GeForce4 440 Go, GeForce4 420 Go,
GeForce4 420 Go 32M, GeForce4 460 Go, Quadro4 550 XGL,
GeForce4 440 Go 64M, Quadro NVS, Quadro4 500 GoGL,
GeForce4 410 Go 16M, GeForce4 MX 440 with AGP8X,
GeForce4 MX 440SE with AGP8X, GeForce4 MX 420 with AGP8X,
GeForce4 MX 4000, GeForce4 448 Go, GeForce4 488 Go, Quadro4 580 XGL,
Quadro4 NVS 280 SD, Quadro4 380 XGL, Quadro NVS 50 PCI,
GeForce4 448 Go, GeForce4 MX Integrated GPU, GeForce3,
GeForce3 Ti 200, GeForce3 Ti 500, Quadro DCC, GeForce4 Ti 4600,
GeForce4 Ti 4400, GeForce4 Ti 4200, Quadro4 900 XGL, Quadro4 750 XGL,
Quadro4 700 XGL, GeForce4 Ti 4800, GeForce4 Ti 4200 with AGP8X,
GeForce4 Ti 4800 SE, GeForce4 4200 Go, Quadro4 700 GoGL,
Quadro4 980 XGL, Quadro4 780 XGL, GeForce FX 5800 Ultra,
GeForce FX 5800, Quadro FX 2000, Quadro FX 1000,
GeForce FX 5600 Ultra, GeForce FX 5600, GeForce FX 5600XT,
GeForce FX Go5600, GeForce FX Go5650, Quadro FX Go700,
GeForce FX 5200, GeForce FX 5200 Ultra, GeForce FX 5200,
GeForce FX 5200LE, GeForce FX Go5200, GeForce FX Go5250,
GeForce FX 5500, GeForce FX 5100, GeForce FX Go5200 32M/64M,
Quadro NVS 55/280 PCI, Quadro FX 500/600 PCI,
GeForce FX Go53xx Series, GeForce FX Go5100, GeForce FX 5900 Ultra,
GeForce FX 5900, GeForce FX 5900XT, GeForce FX 5950 Ultra,
GeForce FX 5900ZT, Quadro FX 3000, Quadro FX 700,
GeForce FX 5700 Ultra, GeForce FX 5700, GeForce FX 5700LE,
GeForce FX 5700VE, GeForce FX Go5700, GeForce FX Go5700,
Quadro FX Go1000, Quadro FX 1100, GeForce 6800 Ultra, GeForce 6800,
GeForce 6800 LE, GeForce 6800 XE, GeForce 6800 XT, GeForce 6800 GT,
GeForce 6800 GT, GeForce 6800 GS, GeForce 6800 XT, Quadro FX 4000,
GeForce 6800 GS, GeForce 6800, GeForce 6800 LE, GeForce 6800 XT,
GeForce Go 6800, GeForce Go 6800 Ultra, Quadro FX Go1400,
Quadro FX 3450/4000 SDI, Quadro FX 1400, GeForce 6600 GT,
GeForce 6600, GeForce 6600 LE, GeForce 6600 VE, GeForce Go 6600,
GeForce 6610 XL, GeForce Go 6600 TE/6200 TE, GeForce 6700 XL,
GeForce Go 6600, GeForce Go 6600 GT, Quadro FX 550, Quadro FX 550,
Quadro FX 540, GeForce 6200, GeForce 6500,
GeForce 6200 TurboCache(TM), GeForce 6200SE TurboCache(TM),
GeForce 6200 LE, GeForce Go 6200, Quadro NVS 285, GeForce Go 6400,
GeForce Go 6200, GeForce Go 6400, GeForce 6250, GeForce 6800,
GeForce 6800 LE, GeForce 6800 GT, GeForce 6800 XT, GeForce 6200,
GeForce 6200 A-LE, GeForce 7800 GTX, GeForce 7800 GTX,
GeForce 7800 GT, GeForce 7800 GS, GeForce 7800 SLI, GeForce Go 7800,
GeForce Go 7800 GTX, Quadro FX 4500, GeForce 7300 LE,
GeForce 7300 SE, GeForce Go 7200, GeForce Go 7300, GeForce Go 7400,
GeForce Go 7400 GS, Quadro NVS 110M, Quadro NVS 120M, Quadro FX 350M,
GeForce 7500 LE, Quadro FX 350, GeForce 7300 GS, GeForce 7600 GT,
GeForce 7600 GS, GeForce 7300 GT, GeForce 7600 LE, GeForce 7300 GT,
GeForce Go 7700, GeForce Go 7600, GeForce Go 7600 GT,
Quadro NVS 300M, GeForce Go 7900 SE, Quadro FX 550M, Quadro FX 560,
GeForce 7900 GTX, GeForce 7900 GT, GeForce 7900 GS,
GeForce Go 7900 GS, GeForce Go 7900 GTX, Quadro FX 2500M,
Quadro FX 1500M, Quadro FX 5500, Quadro FX 3500, Quadro FX 1500,
Quadro FX 4500 X2, GeForce 6150, GeForce 6150 LE, GeForce 6100,
GeForce Go 6150, GeForce Go 6100, GeForce 8800 GTX, GeForce 8800 GTS,
GeForce 8800 Ultra, Quadro FX 5600, Quadro FX 4600, GeForce 8600 GTS,
GeForce 8600 GT, GeForce 8400 GS, GeForce 8600M GT, GeForce 8700M GT,
Quadro FX 370, Quadro NVS 320M, Quadro FX 570M, Quadro FX 1600M,
Quadro FX 570, Quadro FX 1700, GeForce 8500 GT, GeForce 8400 GS,
GeForce 8300 GS, GeForce 8600M GS, GeForce 8400M GT,
GeForce 8400M GS, GeForce 8400M G, Quadro NVS 140M, Quadro NVS 130M,
Quadro NVS 135M, Quadro FX 360M, Quadro NVS 290
(II) Primary Device is: PCI 01:00:0
(--) Chipset GeForce 6600 GT found
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0xd1000000 - 0xd1003fff (0x4000) MX[B]
[5] -1 0 0xd1004000 - 0xd1007fff (0x4000) MX[B]
[6] -1 0 0xd1008000 - 0xd10087ff (0x800) MX[B]
[7] -1 0 0xd2000000 - 0xd2000fff (0x1000) MX[B]
[8] -1 0 0xd2001000 - 0xd2001fff (0x1000) MX[B]
[9] -1 0 0xd2002000 - 0xd2002fff (0x1000) MX[B]
[10] -1 0 0xfeb00000 - 0xfeb000ff (0x100) MX[B]
[11] -1 0 0xd2003000 - 0xd2003fff (0x1000) MX[B]
[12] -1 0 0xcc000000 - 0xccffffff (0x1000000) MX[B](B)
[13] -1 0 0xc0000000 - 0xc7ffffff (0x8000000) MX[B](B)
[14] -1 0 0xc8000000 - 0xcbffffff (0x4000000) MX[B](B)
[15] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[16] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[17] -1 0 0x0000a400 - 0x0000a4ff (0x100) IX[B]
[18] -1 0 0x0000a000 - 0x0000a0ff (0x100) IX[B]
[19] -1 0 0x0000b000 - 0x0000b007 (0x8) IX[B]
[20] -1 0 0x0000c400 - 0x0000c40f (0x10) IX[B]
[21] -1 0 0x00000b60 - 0x00000b63 (0x4) IX[B]
[22] -1 0 0x00000960 - 0x00000967 (0x8) IX[B]
[23] -1 0 0x00000be0 - 0x00000be3 (0x4) IX[B]
[24] -1 0 0x000009e0 - 0x000009e7 (0x8) IX[B]
[25] -1 0 0x0000d800 - 0x0000d80f (0x10) IX[B]
[26] -1 0 0x00000b70 - 0x00000b73 (0x4) IX[B]
[27] -1 0 0x00000970 - 0x00000977 (0x8) IX[B]
[28] -1 0 0x00000bf0 - 0x00000bf3 (0x4) IX[B]
[29] -1 0 0x000009f0 - 0x000009f7 (0x8) IX[B]
[30] -1 0 0x0000f000 - 0x0000f00f (0x10) IX[B]
[31] -1 0 0x00004c40 - 0x00004c7f (0x40) IX[B]
[32] -1 0 0x00004c00 - 0x00004c3f (0x40) IX[B]
[33] -1 0 0x0000dc00 - 0x0000dc1f (0x20) IX[B]
(II) resource ranges after probing:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0xd1000000 - 0xd1003fff (0x4000) MX[B]
[5] -1 0 0xd1004000 - 0xd1007fff (0x4000) MX[B]
[6] -1 0 0xd1008000 - 0xd10087ff (0x800) MX[B]
[7] -1 0 0xd2000000 - 0xd2000fff (0x1000) MX[B]
[8] -1 0 0xd2001000 - 0xd2001fff (0x1000) MX[B]
[9] -1 0 0xd2002000 - 0xd2002fff (0x1000) MX[B]
[10] -1 0 0xfeb00000 - 0xfeb000ff (0x100) MX[B]
[11] -1 0 0xd2003000 - 0xd2003fff (0x1000) MX[B]
[12] -1 0 0xcc000000 - 0xccffffff (0x1000000) MX[B](B)
[13] -1 0 0xc0000000 - 0xc7ffffff (0x8000000) MX[B](B)
[14] -1 0 0xc8000000 - 0xcbffffff (0x4000000) MX[B](B)
[15] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B]
[16] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
[17] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
[18] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[19] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[20] -1 0 0x0000a400 - 0x0000a4ff (0x100) IX[B]
[21] -1 0 0x0000a000 - 0x0000a0ff (0x100) IX[B]
[22] -1 0 0x0000b000 - 0x0000b007 (0x8) IX[B]
[23] -1 0 0x0000c400 - 0x0000c40f (0x10) IX[B]
[24] -1 0 0x00000b60 - 0x00000b63 (0x4) IX[B]
[25] -1 0 0x00000960 - 0x00000967 (0x8) IX[B]
[26] -1 0 0x00000be0 - 0x00000be3 (0x4) IX[B]
[27] -1 0 0x000009e0 - 0x000009e7 (0x8) IX[B]
[28] -1 0 0x0000d800 - 0x0000d80f (0x10) IX[B]
[29] -1 0 0x00000b70 - 0x00000b73 (0x4) IX[B]
[30] -1 0 0x00000970 - 0x00000977 (0x8) IX[B]
[31] -1 0 0x00000bf0 - 0x00000bf3 (0x4) IX[B]
[32] -1 0 0x000009f0 - 0x000009f7 (0x8) IX[B]
[33] -1 0 0x0000f000 - 0x0000f00f (0x10) IX[B]
[34] -1 0 0x00004c40 - 0x00004c7f (0x40) IX[B]
[35] -1 0 0x00004c00 - 0x00004c3f (0x40) IX[B]
[36] -1 0 0x0000dc00 - 0x0000dc1f (0x20) IX[B]
[37] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B]
[38] 0 0 0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 0.
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/lib/xorg/modules//libint10.so
(II) Module int10: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 1.0.0
ABI class: X.Org Video Driver, version 1.2
(II) NV(0): Initializing int10
(WW) NV(0): Bad V_BIOS checksum
(II) NV(0): Primary V_BIOS segment is: 0xc000
(--) NV(0): Chipset: "GeForce 6600 GT"
(**) NV(0): Depth 24, (--) framebuffer bpp 32
(==) NV(0): RGB weight 888
(==) NV(0): Default visual is TrueColor
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules//libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 0.1.0
ABI class: X.Org Video Driver, version 1.2
(==) NV(0): Using HW cursor
(--) NV(0): Linear framebuffer at 0xC0000000
(--) NV(0): MMIO registers at 0xC8000000
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"(II) Module already built-in
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"(II) Module already built-in
(II) NV(0): I2C bus "DDC" initialized.
(II) NV(0): Probing for analog device on output A...
(--) NV(0): ...can't find one
(II) NV(0): Probing for analog device on output B...
(--) NV(0): ...found one
(II) NV(0): Probing for EDID on I2C bus A...
(II) NV(0): I2C device "DDC:ddc2" registered at address 0xA0.
(II) NV(0): I2C device "DDC:ddc2" removed.
(--) NV(0): DDC detected a DFP:
(II) NV(0): Manufacturer: NEC Model: 6665 Serial#: 16843009
(II) NV(0): Year: 2004 Week: 41
(II) NV(0): EDID Version: 1.3
(II) NV(0): Digital Display Input
(II) NV(0): Max H-Image Size [cm]: horiz.: 34 vert.: 27
(II) NV(0): Gamma: 2.20
(II) NV(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
(II) NV(0): Default color space is primary color space
(II) NV(0): First detailed timing is preferred mode
(II) NV(0): redX: 0.641 redY: 0.342 greenX: 0.292 greenY: 0.611
(II) NV(0): blueX: 0.147 blueY: 0.068 whiteX: 0.313 whiteY: 0.329
(II) NV(0): Supported VESA Video Modes:
(II) NV(0): 720x400@70Hz
(II) NV(0): 640x480@60Hz
(II) NV(0): 640x480@67Hz
(II) NV(0): 640x480@72Hz
(II) NV(0): 640x480@75Hz
(II) NV(0): 800x600@56Hz
(II) NV(0): 800x600@60Hz
(II) NV(0): 800x600@72Hz
(II) NV(0): 800x600@75Hz
(II) NV(0): 832x624@75Hz
(II) NV(0): 1024x768@60Hz
(II) NV(0): 1024x768@70Hz
(II) NV(0): 1024x768@75Hz
(II) NV(0): 1152x870@75Hz
(II) NV(0): Manufacturer's mask: 0
(II) NV(0): Supported Future Video Modes:
(II) NV(0): #0: hsize: 1152 vsize 864 refresh: 75 vid: 20337
(II) NV(0): #1: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
(II) NV(0): Supported additional Video Mode:
(II) NV(0): clock: 108.0 MHz Image Size: 338 x 270 mm
(II) NV(0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688 h_border: 0
(II) NV(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0
(II) NV(0): Ranges: V min: 56 V max: 75 Hz, H min: 31 H max: 69 kHz, PixClock max 110 MHz
(II) NV(0): Monitor name: LCD1770NX
(II) NV(0): Serial No: 49001253TB
(II) NV(0): EDID (in hex):
(II) NV(0): 00ffffffffffff0038a3656601010101
(II) NV(0): 290e010380221b78ee2ee5a4574a9c25
(II) NV(0): 115054bfee80714f8180010101010101
(II) NV(0): 010101010101302a009851002a403070
(II) NV(0): 1300520e1100001e000000fd00384b1f
(II) NV(0): 450b000a202020202020000000fc004c
(II) NV(0): 4344313737304e580a202020000000ff
(II) NV(0): 00343930303132353354420a20200069
(II) NV(0): Probing for EDID on I2C bus B...
(II) NV(0): I2C device "DDC:ddc2" registered at address 0xA0.
(II) NV(0): I2C device "DDC:ddc2" removed.
(II) NV(0): ... none found
(--) NV(0): CRTC 0 is currently programmed for DFP
(II) NV(0): Using DFP on CRTC 0
(--) NV(0): Panel size is 1280 x 1024
(II) NV(0): Using hsync ranges from config file
(II) NV(0): Using vrefresh ranges from config file
(II) NV(0): Printing DDC gathered Modelines:
(II) NV(0): Modeline "800x600" 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync
(II) NV(0): Modeline "800x600" 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync
(II) NV(0): Modeline "640x480" 31.50 640 656 720 840 480 481 484 500 -hsync -vsync
(II) NV(0): Modeline "640x480" 31.50 640 664 704 832 480 489 491 520 -hsync -vsync
(II) NV(0): Modeline "640x480" 30.24 640 704 768 864 480 483 486 525 -hsync -vsync
(II) NV(0): Modeline "640x480" 25.20 640 656 752 800 480 490 492 525 -hsync -vsync
(II) NV(0): Modeline "720x400" 28.32 720 738 846 900 400 412 414 449 -hsync +vsync
(II) NV(0): Modeline "1024x768" 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync
(II) NV(0): Modeline "1024x768" 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync
(II) NV(0): Modeline "1024x768" 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync
(II) NV(0): Modeline "832x624" 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync
(II) NV(0): Modeline "800x600" 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync
(II) NV(0): Modeline "800x600" 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync
(II) NV(0): Modeline "1152x864" 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync
(II) NV(0): Modeline "1152x864" 104.00 1152 1224 1344 1536 864 867 871 905 -hsync +vsync
(II) NV(0): Modeline "1280x1024" 109.00 1280 1368 1496 1712 1024 1027 1034 1063 -hsync +vsync
(II) NV(0): Modeline "1280x1024" 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync
(II) NV(0): Panel is TMDS
(--) NV(0): VideoRAM: 131072 kBytes
(==) NV(0): Using gamma correction (1.0, 1.0, 1.0)
(II) NV(0): Monitor[0]: Using hsync range of 28.00-64.00 kHz
(II) NV(0): Monitor[0]: Using vrefresh range of 50.00-60.00 Hz
(II) NV(0): Clock range: 12.00 to 400.00 MHz
(II) NV(0): Not using default mode "640x350" (vrefresh out of range)
(II) NV(0): Not using default mode "320x175" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "640x400" (vrefresh out of range)
(II) NV(0): Not using default mode "320x200" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "720x400" (vrefresh out of range)
(II) NV(0): Not using default mode "360x200" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "576x432" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "1600x1200" (exceeds panel dimensions)
(II) NV(0): Not using default mode "1600x1200" (exceeds panel dimensions)
(II) NV(0): Not using default mode "1600x1200" (exceeds panel dimensions)
(II) NV(0): Not using default mode "1600x1200" (exceeds panel dimensions)
(II) NV(0): Not using default mode "1600x1200" (exceeds panel dimensions)
(II) NV(0): Not using default mode "1792x1344" (exceeds panel dimensions)
(II) NV(0): Not using default mode "896x672" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "1792x1344" (exceeds panel dimensions)
(II) NV(0): Not using default mode "896x672" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "1856x1392" (exceeds panel dimensions)
(II) NV(0): Not using default mode "928x696" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "1856x1392" (exceeds panel dimensions)
(II) NV(0): Not using default mode "928x696" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "1920x1440" (exceeds panel dimensions)
(II) NV(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "1920x1440" (exceeds panel dimensions)
(II) NV(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "832x624" (vrefresh out of range)
(II) NV(0): Not using default mode "416x312" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "576x384" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "1400x1050" (exceeds panel dimensions)
(II) NV(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "1400x1050" (exceeds panel dimensions)
(II) NV(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "1600x1024" (exceeds panel dimensions)
(II) NV(0): Not using default mode "800x512" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "1920x1440" (exceeds panel dimensions)
(II) NV(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "2048x1536" (exceeds panel dimensions)
(II) NV(0): Not using default mode "2048x1536" (exceeds panel dimensions)
(II) NV(0): Not using default mode "2048x1536" (exceeds panel dimensions)
(II) NV(0): Not using driver mode "640x480" (vrefresh out of range)
(II) NV(0): Not using driver mode "640x480" (vrefresh out of range)
(II) NV(0): Not using driver mode "640x480" (vrefresh out of range)
(II) NV(0): Not using driver mode "720x400" (vrefresh out of range)
(II) NV(0): Not using driver mode "1024x768" (vrefresh out of range)
(II) NV(0): Not using driver mode "1024x768" (vrefresh out of range)
(II) NV(0): Not using driver mode "832x624" (vrefresh out of range)
(II) NV(0): Not using driver mode "800x600" (vrefresh out of range)
(II) NV(0): Not using driver mode "800x600" (vrefresh out of range)
(II) NV(0): Not using driver mode "1152x864" (hsync out of range)
(II) NV(0): Not using driver mode "1152x864" (hsync out of range)
(--) NV(0): Virtual size is 1280x1024 (pitch 1280)
(**) NV(0): *Driver mode "1280x1024": 108.0 MHz, 64.0 kHz, 60.0 Hz
(II) NV(0): Modeline "1280x1024" 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync
(**) NV(0): *Mode "1280x960": 97.7 MHz, 57.6 kHz, 58.0 Hz
(II) NV(0): Modeline "1280x960" 97.68 1280 1352 1488 1696 960 961 964 993
(**) NV(0): *Mode "1280x800": 80.6 MHz, 48.0 kHz, 58.0 Hz
(II) NV(0): Modeline "1280x800" 80.58 1280 1344 1480 1680 800 801 804 827
(**) NV(0): *Mode "1152x864": 78.8 MHz, 51.9 kHz, 58.0 Hz
(II) NV(0): Modeline "1152x864" 78.82 1152 1216 1336 1520 864 865 868 894
(**) NV(0): *Mode "1280x768": 77.4 MHz, 46.1 kHz, 58.0 Hz
(II) NV(0): Modeline "1280x768" 77.37 1280 1344 1480 1680 768 769 772 794
(**) NV(0): *Driver mode "1024x768": 65.0 MHz, 48.4 kHz, 60.0 Hz
(II) NV(0): Modeline "1024x768" 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync
(**) NV(0): *Mode "1280x600": 58.8 MHz, 36.0 kHz, 58.0 Hz
(II) NV(0): Modeline "1280x600" 58.78 1280 1328 1456 1632 600 601 604 621
(**) NV(0): *Mode "1024x600": 47.3 MHz, 36.0 kHz, 58.0 Hz
(II) NV(0): Modeline "1024x600" 47.26 1024 1064 1168 1312 600 601 604 621
(**) NV(0): *Driver mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz
(II) NV(0): Modeline "800x600" 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync
(**) NV(0): *Mode "768x576": 33.7 MHz, 34.6 kHz, 58.0 Hz
(II) NV(0): Modeline "768x576" 33.74 768 792 872 976 576 577 580 596
(**) NV(0): *Driver mode "640x480": 25.2 MHz, 31.5 kHz, 60.0 Hz
(II) NV(0): Modeline "640x480" 25.20 640 656 752 800 480 490 492 525 -hsync -vsync
(**) NV(0): Driver mode "1280x1024": 109.0 MHz, 63.7 kHz, 59.9 Hz
(II) NV(0): Modeline "1280x1024" 109.00 1280 1368 1496 1712 1024 1027 1034 1063 -hsync +vsync
(**) NV(0): Driver mode "1280x1024": 90.8 MHz, 63.0 kHz, 59.8 Hz
(II) NV(0): Modeline "1280x1024" 90.75 1280 1328 1360 1440 1024 1027 1034 1054 +hsync -vsync
(**) NV(0): Mode "1280x1024": 105.2 MHz, 61.4 kHz, 58.0 Hz
(II) NV(0): Modeline "1280x1024" 105.15 1280 1360 1496 1712 1024 1025 1028 1059
(**) NV(0): Default mode "1152x768": 65.0 MHz, 44.2 kHz, 54.8 Hz
(II) NV(0): Modeline "1152x768" 65.00 1152 1178 1314 1472 768 771 777 806 +hsync +vsync
(**) NV(0): Mode "1024x768": 61.9 MHz, 46.0 kHz, 58.0 Hz
(II) NV(0): Modeline "1024x768" 61.89 1024 1080 1184 1344 768 769 772 794
(**) NV(0): Driver mode "800x600": 36.0 MHz, 35.2 kHz, 56.2 Hz
(II) NV(0): Modeline "800x600" 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync
(**) NV(0): Mode "800x600": 36.9 MHz, 36.0 kHz, 58.0 Hz
(II) NV(0): Modeline "800x600" 36.88 800 832 912 1024 600 601 604 621
(**) NV(0): Mode "640x480": 23.1 MHz, 28.8 kHz, 58.0 Hz
(II) NV(0): Modeline "640x480" 23.06 640 656 720 800 480 481 484 497
(**) NV(0): Display dimensions: (340, 270) mm
(**) NV(0): DPI set to (95, 96)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.3


Fortsetzung im nächsten Post

[IZazen]

Teil 2


(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/lib/xorg/modules//libxaa.so
(II) Module xaa: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 1.2.0
ABI class: X.Org Video Driver, version 1.2
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"(II) Module already built-in
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] 0 0 0xcc000000 - 0xccffffff (0x1000000) MX[B]
[1] 0 0 0xc0000000 - 0xc7ffffff (0x8000000) MX[B]
[2] 0 0 0xc8000000 - 0xcbffffff (0x4000000) MX[B]
[3] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[4] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[5] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[6] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[7] -1 0 0xd1000000 - 0xd1003fff (0x4000) MX[B]
[8] -1 0 0xd1004000 - 0xd1007fff (0x4000) MX[B]
[9] -1 0 0xd1008000 - 0xd10087ff (0x800) MX[B]
[10] -1 0 0xd2000000 - 0xd2000fff (0x1000) MX[B]
[11] -1 0 0xd2001000 - 0xd2001fff (0x1000) MX[B]
[12] -1 0 0xd2002000 - 0xd2002fff (0x1000) MX[B]
[13] -1 0 0xfeb00000 - 0xfeb000ff (0x100) MX[B]
[14] -1 0 0xd2003000 - 0xd2003fff (0x1000) MX[B]
[15] -1 0 0xcc000000 - 0xccffffff (0x1000000) MX[B](B)
[16] -1 0 0xc0000000 - 0xc7ffffff (0x8000000) MX[B](B)
[17] -1 0 0xc8000000 - 0xcbffffff (0x4000000) MX[B](B)
[18] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B](OprD)
[19] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B](OprD)
[20] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B](OprD)
[21] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[22] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[23] -1 0 0x0000a400 - 0x0000a4ff (0x100) IX[B]
[24] -1 0 0x0000a000 - 0x0000a0ff (0x100) IX[B]
[25] -1 0 0x0000b000 - 0x0000b007 (0x8) IX[B]
[26] -1 0 0x0000c400 - 0x0000c40f (0x10) IX[B]
[27] -1 0 0x00000b60 - 0x00000b63 (0x4) IX[B]
[28] -1 0 0x00000960 - 0x00000967 (0x8) IX[B]
[29] -1 0 0x00000be0 - 0x00000be3 (0x4) IX[B]
[30] -1 0 0x000009e0 - 0x000009e7 (0x8) IX[B]
[31] -1 0 0x0000d800 - 0x0000d80f (0x10) IX[B]
[32] -1 0 0x00000b70 - 0x00000b73 (0x4) IX[B]
[33] -1 0 0x00000970 - 0x00000977 (0x8) IX[B]
[34] -1 0 0x00000bf0 - 0x00000bf3 (0x4) IX[B]
[35] -1 0 0x000009f0 - 0x000009f7 (0x8) IX[B]
[36] -1 0 0x0000f000 - 0x0000f00f (0x10) IX[B]
[37] -1 0 0x00004c40 - 0x00004c7f (0x40) IX[B]
[38] -1 0 0x00004c00 - 0x00004c3f (0x40) IX[B]
[39] -1 0 0x0000dc00 - 0x0000dc1f (0x20) IX[B]
[40] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B](OprU)
[41] 0 0 0x000003c0 - 0x000003df (0x20) IS[B](OprU)
(==) NV(0): Write-combining range (0xc0000000,0x8000000)
(II) NV(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
8x8 mono pattern filled rectangles
Indirect CPU to Screen color expansion
Solid Lines
Scanline Image Writes
Offscreen Pixmaps
Setting up tile and stipple cache:
32 128x128 slots
32 256x256 slots
16 512x512 slots
(==) NV(0): Backing store disabled
(==) NV(0): Silken mouse enabled
(**) Option "dpms"
(**) NV(0): DPMS enabled
(==) RandR enabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension XAccessControlExtension
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
(II) Loading local sub module "GLcore"
(II) LoadModule: "GLcore"
(II) Loading /usr/lib/xorg/modules//extensions/libGLcore.so
(II) Module GLcore: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.3
(II) GLX: Initialized MESA-PROXY GL provider for screen 0
(**) Option "CoreKeyboard"
(**) Keyboard[0]: Core Keyboard
(**) Option "Protocol" "Standard"
(**) Keyboard[0]: Protocol: Standard
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xfree86"
(**) Keyboard[0]: XkbRules: "xfree86"
(**) Option "XkbModel" "a4techKB21"
(**) Keyboard[0]: XkbModel: "a4techKB21"
(**) Option "XkbLayout" "de"
(**) Keyboard[0]: XkbLayout: "de"
(**) Option "XkbVariant" "nodeadkeys"
(**) Keyboard[0]: XkbVariant: "nodeadkeys"
(**) Option "XkbOptions" "Compose,compose:rwin,lv3:ralt_switch"
(**) Keyboard[0]: XkbOptions: "Compose,compose:rwin,lv3:ralt_switch"
(**) Option "CustomKeycodes" "off"
(**) Keyboard[0]: CustomKeycodes disabled
(**) Option "Protocol" "explorerps/2"
(**) Mouse[1]: Device: "/dev/input/mice"
(**) Mouse[1]: Protocol: "explorerps/2"
(**) Option "CorePointer"
(**) Mouse[1]: Core Pointer
(**) Option "Device" "/dev/input/mice"
(**) Option "Buttons" "9"
(==) Mouse[1]: Emulate3Buttons, Emulate3Timeout: 50
(**) Option "ZAxisMapping" "4 5"
(**) Mouse[1]: ZAxisMapping: buttons 4 and 5
(**) Mouse[1]: Buttons: 13
(**) Mouse[1]: Sensitivity: 1
(II) XINPUT: Adding extended input device "Mouse[1]" (type: MOUSE)
(II) XINPUT: Adding extended input device "Keyboard[0]" (type: KEYBOARD)
(II) Mouse[1]: ps2EnableDataReporting: succeeded


Und hier
/var/log/Xorg.0.log



# /.../
# SaX generated X11 config file
# Created on: 2006-10-17T22:00:01+0200.
#
# Version: 7.1
# Contact: Marcus Schaefer <sax@suse.de>, 2005
# Contact: SaX-User list <https://lists.berlios.de/mailman/listinfo/sax-users>
#
# Automatically generated by [ISaX] (7.1)
# PLEASE DO NOT EDIT THIS FILE!
#
Section "Files"
FontPath "/usr/share/fonts/misc:unscaled"
FontPath "/usr/share/fonts/local"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/Type1"
FontPath "/usr/share/fonts/URW"
FontPath "/usr/share/fonts/Speedo"
FontPath "/usr/share/fonts/PEX"
FontPath "/usr/share/fonts/cyrillic"
FontPath "/usr/share/fonts/latin2/misc:unscaled"
FontPath "/usr/share/fonts/latin2/75dpi:unscaled"
FontPath "/usr/share/fonts/latin2/100dpi:unscaled"
FontPath "/usr/share/fonts/latin2/Type1"
FontPath "/usr/share/fonts/latin7/75dpi:unscaled"
FontPath "/usr/share/fonts/baekmuk:unscaled"
FontPath "/usr/share/fonts/japanese:unscaled"
FontPath "/usr/share/fonts/kwintv"
FontPath "/usr/share/fonts/truetype"
FontPath "/usr/share/fonts/uni:unscaled"
FontPath "/usr/share/fonts/CID"
FontPath "/usr/share/fonts/ucs/misc:unscaled"
FontPath "/usr/share/fonts/ucs/75dpi:unscaled"
FontPath "/usr/share/fonts/ucs/100dpi:unscaled"
FontPath "/usr/share/fonts/hellas/misc:unscaled"
FontPath "/usr/share/fonts/hellas/75dpi:unscaled"
FontPath "/usr/share/fonts/hellas/100dpi:unscaled"
FontPath "/usr/share/fonts/hellas/Type1"
FontPath "/usr/share/fonts/misc/sgi:unscaled"
FontPath "/usr/share/fonts/xtest"
FontPath "/opt/kde3/share/fonts"
InputDevices "/dev/gpmdata"
InputDevices "/dev/input/mice"
EndSection

Section "ServerFlags"
Option "AllowMouseOpenFail" "on"
EndSection

Section "Module"
Load "freetype"
Load "type1"
Load "dbe"
Load "glx"
Load "extmod"
Load "v4l"
EndSection

Section "InputDevice"
Driver "kbd"
Identifier "Keyboard[0]"
Option "Protocol" "Standard"
Option "XkbLayout" "de"
Option "XkbModel" "a4techKB21"
Option "XkbOptions" "Compose,compose:rwin,lv3:ralt_switch"
Option "XkbRules" "xfree86"
Option "XkbVariant" "nodeadkeys"
EndSection

Section "InputDevice"
Driver "mouse"
Identifier "Mouse[1]"
Option "Buttons" "9"
Option "Device" "/dev/input/mice"
Option "Name" "Cypress Mouse"
Option "Protocol" "explorerps/2"
Option "Vendor" "Sysp"
Option "ZAxisMapping" "4 5"
EndSection

Section "Monitor"
DisplaySize 340 270
HorizSync 28-64
Identifier "Monitor[0]"
ModelName "1280X1024@60HZ"
Option "DPMS"
VendorName "--> VESA"
VertRefresh 50-60
UseModes "Modes[0]"
EndSection

Section "Modes"
Identifier "Modes[0]"
Modeline "1280x1024" 105.15 1280 1360 1496 1712 1024 1025 1028 1059
Modeline "1280x960" 97.68 1280 1352 1488 1696 960 961 964 993
Modeline "1280x800" 80.58 1280 1344 1480 1680 800 801 804 827
Modeline "1152x864" 78.82 1152 1216 1336 1520 864 865 868 894
Modeline "1280x768" 77.37 1280 1344 1480 1680 768 769 772 794
Modeline "1024x768" 61.89 1024 1080 1184 1344 768 769 772 794
Modeline "1280x600" 58.78 1280 1328 1456 1632 600 601 604 621
Modeline "1024x600" 47.26 1024 1064 1168 1312 600 601 604 621
Modeline "800x600" 36.88 800 832 912 1024 600 601 604 621
Modeline "768x576" 33.74 768 792 872 976 576 577 580 596
Modeline "640x480" 23.06 640 656 720 800 480 481 484 497
EndSection

Section "Screen"
DefaultDepth 24
SubSection "Display"
Depth 15
Modes "1280x1024" "1280x960" "1280x800" "1152x864" "1280x768" "1024x768" "1280x600" "1024x600" "800x600" "768x576" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1280x1024" "1280x960" "1280x800" "1152x864" "1280x768" "1024x768" "1280x600" "1024x600" "800x600" "768x576" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1280x1024" "1280x960" "1280x800" "1152x864" "1280x768" "1024x768" "1280x600" "1024x600" "800x600" "768x576" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1280x1024" "1280x960" "1280x800" "1152x864" "1280x768" "1024x768" "1280x600" "1024x600" "800x600" "768x576" "640x480"
EndSubSection
Device "Device[0]"
Identifier "Screen[0]"
Monitor "Monitor[0]"
EndSection

Section "Device"
BoardName "GeForce 6600 GT"
BusID "1:0:0"
Driver "nv"
Identifier "Device[0]"
Screen 0
VendorName "NVidia"
EndSection

Section "ServerLayout"
Identifier "Layout[all]"
InputDevice "Keyboard[0]" "CoreKeyboard"
InputDevice "Mouse[1]" "CorePointer"
Option "Clone" "off"
Option "Xinerama" "off"
Screen "Screen[0]"
EndSection

Section "DRI"
Group "video"
Mode 0660
EndSection

Section "Extensions"
EndSection


Gruß
IZazen

[IZazen]

Here I have no objections ;-)

Die beiden Dateien sind oben gepostet.

IZazen

[DERRICHTER]

Gib am Bootprompt doch einfach einmal Deinen Usernamen, dann das Kennwort ein. Anschließend startx und enter. Mitteilen, was passiert.

[gadget]

Ob da was anderes bei herauskommt? Versuch ist es wert...

Und mache dich bitte mit den code-Tags vertraut, wenn du Logs und anderes postest: http://www.linuxforen.de/forums/misc.php?do=bbcode

[IZazen]

Gut: Das erster Wort nach dem Bootprompt war der Benutzername "root".

Suse hat das beim Starten offenbar als Bootquelle angesehen, den es hat nach /dev/root gesucht. Nachdem Suse unter /dev/root nicht gefunden hat, was es suchte, fragte es:
Want to fall back to /dev/sda? Y/N
Nachdem ich Y und Enter getippt habe, lief der Start wie berichtet: Im Textmodus mit der Loggin-Aufforderung im Textmodus.

Gruß
IZazen

[Rain_maker]

Bootprompt ist auch absoluter Schwachsinn (keine Ahnung, was der Tipp sollte).

Der Bootprompt ist das, was man ganz am Anfang bekommt, um z.B. das zu startende Betriebssystem zu wählen.

Am Bootprompt gibt man eine 3 und dann <Enter> ein, die Kiste bootet in Runlevel 3 (kein X) und dann logt man sich am sog. Loginprompt mit Username und Passwort ein und setzt "startx" ab.

//Edit:


Ich habe die c't-Version von openSUSE 10.3 per Aktualisierung von 10.1 aufgespielt.

Eine Aktualisierung über eine Version hinweg ist jedenfalls keine unterstützte Methode einer Aktualisierung, solche Effekte sind das typische Ergebnis.

Es kann gutgehen, aber oft geht es auch schief, vor allem, wenn viele Drittanbieterpakete (Packman, Guru, .....) installiert sind.

Greetz,

RM

[IZazen]

Ja, so ist das vorgesehen: Linux startet in der Textkonsole, ich tippe Username und Passwort, gefolgt von startx ein, und der KDE-Desktop für diesen Benutzer startet.

Das Problem hier ist jedoch, dass Linux selbst dann in der Textkonsole startet, wenn keine 3, wenn gar nichts, und selbst, wenn eine 5 am Bootprompt eingetippt wird.

Ich möchte, dass Suse ohne Extraeinladung ein grafisches Loggin-Fenster anzeigt, den KDE-Desktop startet, und dass ich unter KDE auch von Benutzer zu Benutzer wechseln kann, ohne zwischendurch den Textmodus zu sehen - also so, wie mit openSuse 10.2.


Na, ja, vielleicht rührt das Problem von dem Überspringen einer Version her. Obwohl ich nur wenige fremde Pakete hatte und mir so ein Fehler nur wegen des Auslassens einer Version unangemessen vorkommt, und obwohl andere diesen Versionssprung mit Erfolg gemacht haben, kann ich es nicht ausschließen.

Hilft da nur noch eine Neuinstallation?

Gruß
IZazen

[gadget]

Ich fürchte, hier wurden die Begriffe etwas durcheinander geworfen, was den Prompt angeht ...

In welchem runlevel startest du denn jetzt? Das findest du mit dem Kommando runlevel (als root) heraus.

Wenn es sicher die 5 ist und die 5 unter suse der Standard ist, dann müssten wir im nächsten Schritt prüfen, ob kdm von init.d aufgerufen wird.

[DERRICHTER]

Sorry, gemeint war nicht der Bootprompt, sondern der prompt :).

[IZazen]

Hallo.

Suse startet für gewöhnlich im RL5. Das lese ich aus den Meldungen beim Booten ab, und ich habe es mit dem Kommando runlevel soeben verifiziert. Mit dem RL3 habe ich nur versuchsweise auf Anregung von der richter gestartet.

init.d ist offenbar ein Ordner. Eine Datei kdm enthält er nicht. Hilft diese Info schon weiter? Falls nicht: Wie kann ich herausfinden, ob kdm von init.d aufgerufen wird?

Gruß
IZazen

[Rain_maker]

init.d ist offenbar ein Ordner. Eine Datei kdm enthält er nicht. Hilft diese Info schon weiter?

Nein, da das normal ist.

Eine Datei "xdm" sollte aber existieren.

Greetz,

RM

[gadget]

Nein, da das normal ist.

Eine Datei "xdm" sollte aber existieren.
Hängt von der Installation ab. Bei mir ist's kdm.

Wichtig wäre nun, ob es eine Verknüpfung nach /etc/rc5.d hat, die mit S beginnt.

[Rain_maker]

Nur weil Debian es so macht, muß es SuSE nicht genauso machen.

Bei SuSE gibt es diese Datei nie, da das alles über die Optionen in xdm gesteuert wird.



case "${DISPLAYMANAGER##*/}" in
kdm|kde|KDM|KDE) DISPLAYMANAGER=/opt/kde3/bin/kdm
PIDFILE="/var/run/kdm.pid"
;;
xdm) DISPLAYMANAGER=$XDM_BIN
;;
gdm|GDM|Gnome|GNOME) DISPLAYMANAGER=$GDM_BIN
PIDFILE="/var/run/gdm.pid"
;;
wdm|WDM) DISPLAYMANAGER=/usr/X11R6/bin/wdm
;;
console) exit 0
;;
*) DISPLAYMANAGER=$XDM_BIN
if test -x /opt/kde3/bin/kdm; then
DISPLAYMANAGER=/opt/kde3/bin/kdm
PIDFILE="/var/run/kdm.pid"
fi
;;
esac

Die Verknüpfung auf xdm sollte allerdings in jedem Fall existieren.



find /etc/init.d/rc5.d/ -name "*xdm*"
/etc/init.d/rc5.d/K12xdm
/etc/init.d/rc5.d/S10xdmso in etwa.

[DERRICHTER]

Über Yast gehst Du in "System" - "Editor für sysconfig-Dateien", dort gehst Du auf "Desktop" und im anschließend sich öffnenden Baum in "Displaymanager", dort in der ersten Zeile wieder in Displaymanager. Dort müsste kdm eingetragen sein. Wenn Du etwas anderes willst, schreibst Du es stattdessen dort hinein.

[DERRICHTER]

Hast Du irgendetwas an der Hardware geändert. Außerdem würden mich einmal die letzten Meldungen der Konsole interessieren, bevor Du aufgefordert wirst, den Usernamen einzugeben.

[IZazen]

Ja. Hier ist ihr Inhalt:


#! /bin/bash
# Copyright (c) 1996-2002 SuSE Linux AG, Nuernberg, Germany.
# All rights reserved.
#
# Author: Florian La Roche, 1996
# Werner Fink <werner@suse.de>, 1996,98,99
# Martin Scherbaum, 1997
# Reinhard Max <max@suse.de>, 1997
#
# Please send feedback to http://www.suse.de/feedback
#
# /etc/init.d/xdm
#
### BEGIN INIT INFO
# Provides: xdm
# Required-Start: $remote_fs acpid
# Should-Start: ypbind $syslog gpm firstboot kbd resmgr earlyxdm winbind
# Required-Stop:
# Default-Start: 5
# Default-Stop:
# Description: X Display Manager
### END INIT INFO

. /etc/rc.status
. /etc/sysconfig/displaymanager
. /etc/sysconfig/language
. /etc/sysconfig/windowmanager
test -e /etc/SuSEconfig/profile && . /etc/SuSEconfig/profile
test -r /etc/profile.d/desktop-data.sh && . /etc/profile.d/desktop-data.sh

locale_vars=" \
LANG \
LC_CTYPE \
LC_NUMERIC \
LC_TIME \
LC_COLLATE \
LC_MONETARY \
LC_MESSAGES \
LC_PAPER \
LC_NAME \
LC_ADDRESS \
LC_TELEPHONE \
LC_MEASUREMENT \
LC_IDENTIFICATION \
LC_ALL"

unset LC_ALL
for lc in $locale_vars
do
eval val="\$RC_$lc"
if test -n "$val"; then
eval $lc="\$RC_$lc"
export $lc
fi
done
unset lc val

test -z "$DEFAULT_WM" && DEFAULT_WM=twm
SAVEPATH=$PATH
PATH=$PATH:/usr/X11R6/bin:/opt/gnome/bin:/usr/openwin/bin
WINDOWMANAGER="`type -p ${DEFAULT_WM##*/}`"
PATH=$SAVEPATH
export WINDOWMANAGER
unset DEFAULT_WM SAVEPATH

PIDFILE="/var/run/xdm.pid"
KDEROOTHOME=/root/.kdm
export KDEROOTHOME
XDMDIR=/etc/X11/xdm
if [ -x /usr/bin/xdm ]; then
XDM_BIN=/usr/bin/xdm
else
XDM_BIN=/usr/X11R6/bin/xdm
fi
if [ -x /usr/sbin/gdm ]; then
GDM_BIN=/usr/sbin/gdm
else
GDM_BIN=/opt/gnome/sbin/gdm
fi
RELOADSIGNAL="-HUP"

case "${DISPLAYMANAGER##*/}" in
kdm|kde|KDM|KDE) DISPLAYMANAGER=/opt/kde3/bin/kdm
PIDFILE="/var/run/kdm.pid"
;;
xdm) DISPLAYMANAGER=$XDM_BIN
;;
gdm|GDM|Gnome|GNOME) DISPLAYMANAGER=$GDM_BIN
PIDFILE="/var/run/gdm.pid"
RELOADSIGNAL="-USR1"
;;
wdm|WDM) DISPLAYMANAGER=/usr/bin/wdm
;;
console) exit 0
;;
*) DISPLAYMANAGER=$XDM_BIN
if test -x /opt/kde3/bin/kdm; then
DISPLAYMANAGER=/opt/kde3/bin/kdm
PIDFILE="/var/run/kdm.pid"
fi
;;
esac
test ! -x "$DISPLAYMANAGER" && DISPLAYMANAGER=$XDM_BIN

DM=${DISPLAYMANAGER##*/}

rc_reset
case "$1" in
start)
# Avoid duplicated messages when earlyxdm is in use
if test "$DISPLAYMANAGER" = /opt/kde3/bin/kdm && \
test -s /var/run/kdm.pid && \
/sbin/checkproc -p /var/run/kdm.pid /opt/kde3/bin/kdm; then
rc_exit 0
fi

if test "$DISPLAYMANAGER" != /opt/kde3/bin/kdm; then
test -x /etc/X11/xdm/SuSEconfig.xdm && \
MD5DIR="/var/adm/SuSEconfig/md5" \
/etc/X11/xdm/SuSEconfig.xdm | \
sed 's+\(.*\)+/etc/init.d/xdm: \1+g' | \
/bin/logger
fi

echo -n "Starting service $DM"
# Don't start xdm if no Xserver is configured and xdm is not
# configured for remote access
if [ ! -x /usr/bin/X -a ! -x /usr/X11R6/bin/X -a \
"$DISPLAYMANAGER_REMOTE_ACCESS" = "no" ]; then
rc_status -u
rc_exit
fi
if [ "$DISPLAYMANAGER" = "$GDM_BIN" -a \
"$DISPLAYMANAGER_REMOTE_ACCESS" = "yes" -a \
"$DISPLAYMANAGER_STARTS_XSERVER" = "no" ]; then
XDMOPTIONS="--no-console"
fi
startproc -p $PIDFILE $DISPLAYMANAGER $XDMOPTIONS || rc_failed
# After a crash or a kill signal we may have
# a wrong owner ship of /dev/xconsole
if rc_status ; then
if test -x $XDMDIR/TakeDevices ; then
$XDMDIR/TakeDevices
else
chown root:tty /dev/xconsole /dev/tty0
chmod 622 /dev/xconsole /dev/tty0
fi
fi
rc_status -v
;;
stop)
echo -n "Shutting down service $DM"
#
# killproc(8) sleep upto five seconds and sends
# SIGKILL if xdm does not terminate within
#
killproc -p $PIDFILE -TERM $DISPLAYMANAGER
rc_status -v
;;
restart)
$0 stop
$0 start
rc_status
;;
reload|force-reload)
test -x /etc/X11/xdm/SuSEconfig.xdm && \
MD5DIR="/var/adm/SuSEconfig/md5" \
/etc/X11/xdm/SuSEconfig.xdm | \
sed 's+\(.*\)+/etc/init.d/xdm: \1+g' | \
/bin/logger
echo -n "Reload service $DM"
killproc -p $PIDFILE $RELOADSIGNAL $DISPLAYMANAGER
rc_status -v
;;
status|check)
echo -n "Checking for service ${DM}: "
checkproc -p $PIDFILE $DISPLAYMANAGER
rc_status -v
;;
probe)
if test $XDMDIR/xdm-config -nt $PIDFILE -o \
$XDMDIR/Xservers -nt $PIDFILE
then
echo reload
fi
;;
try-restart|condrestart)
$0 status
if test $? = 0; then
$0 restart
else
rc_reset
fi
rc_status
;;
*)
echo "Usage: $0 {start|stop|status|restart|reload|force-reload|probe|try-restart}"
exit 1
esac
rc_exit


Gruß
IZazen

[DERRICHTER]

Kannst Du vielleicht auch nochmals die ganze grub.menu.list posten und Deine Hardware verraten, ggf. auf welchem Laufwerk und ggf. welcher Partition Du Linux laufen hast?

[IZazen]

Dort habe ich schon zuvor nachgesehen. Bei "Displaymanager" steht "kdm"

Gruß
IZazen

[IZazen]

Die meldungen würde ich dir gerne kopieren. Wie bringe ich das zuwege?

Gruß
Izazen

[gadget]

Existieren denn nun die genannten Verknüpfungen in /etc/init.d/rc5.d ???

[DERRICHTER]

Was mir zu denken gibt, ist das hier: root=/dev/disk/by-id/scsi-Sinitrd.

Kopieren: Unter Yast in "System" gehen, dort in "Konfiguration des Bootloaders", dann im Fenster "Bootloader-Einstellungen" in "Weitere" (unten rechts) gehen, dort auf "Konfigurationsdateien bearbeiten". Unter "Dateiname" auf "boot/grub/menu.lst" gehen. Dann den entsprechenden Eintrag mit der Maus markieren, mit der rechten Maustaste kopieren und hier posten :).

[Rain_maker]

Was mir zu denken gibt,

Überanstreng Dich nicht dabei.


ist das hier: root=/dev/disk/by-id/scsi-Sinitrd.

Wenn der Eintrag in der menu.lst falsch wäre, dann würde die Kiste wohl kaum booten, egal in welchen Runlevel.

Er ist maximal unglücklich/falsch zitiert, aber das hat mit dem Problem des TE nicht die Bohne zu tun.

*Kopfschüttel*

[IZazen]

Die grub.menu.lst, ist das nicht, was ich im Posting #3 getippt habe?

Oder meinst du das Bootmenü:
openSuse 10.3
Failsafe ...
Windows
XEN...


An der Hardware scheint die Plattenaufteilung (300 GB) interessant:
Die erste primäre Partition ist eine WinXP, die zweite ist die erweiterte mit diversen logischen Partitionen:
Erst eine NTFS.
Dann folgen die Partitionen für Linux: erst eine Swap ca. 1 GB
Dann separate partitionen für root, opt, home und usr
schließlich eine FAT32 (ca 2 GB)

Eine zweite 300 GB enthält zwei NTFS-Partitonen, die für Linux nicht relevant sind.

Das Motherboard ist ein Asus A8N-SLI Deluxe
Grafik: MSI N6600GT-TD 128
AMD Athlon64 3500
RAM 1GB

Gruß
IZazen

[Rain_maker]

Das ist alles ziemlich uninteressant, aber interessant wären vielleicht folgende Angaben/Ausgaben.

1. Was passiert, wenn nach dem einloggen als root in der Konsole (am besten in Runlevel 5 booten und sich dann in die Konsole schmeissen lassen) folgendes abgesetzt wird?


rcxdm restartIch tippe auf "nix", aber man weiss ja nie.

2.

find /etc/opt/kde3/ -name "*kdmrc*" -exec ls -ls {} \;

find /opt/kde3/ -name "*kdmrc*" -exec ls -ls {} \;

Ausgaben posten (obwohl ich dieses herumfrickeln an einem System, das über eine Version hinweg upgedatet wurde eigentlich für wenig erfolgversprechend halte).

Greetz,

RM