Archiv verlassen und diese Seite im Standarddesign anzeigen : FTP-Server wie neu Starten...?
Hallo zusammen,
normal wartet der Tomek immer unseren Server, leider habe ich um diese Uhrzeit ein Problem und er ist nicth online.
Ich habe vorhin den Server neu booten müssen und seitdem komme ich nicht mehr mit dem FTP-Programm auf unsere Accounts...
Könnte mir jemand sagen wie ich den FTP Server neu starte und wie ich herrausfinde welches Programm als FTP-Server fungiert?
Vielen Dank schonmal.
Viele Grüsse
d-talk72
So so, der Tomek macht das ;)
Welche Distribution läuft auf dem Server?
Hallo psy,
das wüsste ich auch gerne, ich habe nicht viel Ahnung von Servern, daher überlasse ich die Wartung immer einem Fachmann :)
Ähm ok :)
Schau mal auf dem Server im Ordner /etc, da müsste es eine Datei geben die mit "version" oder "release" aufhört.
Poste dann mal den Inhalt dieser Datei hier.
Eine Datei die mit release aufhört gibts unter /etc nicht... nur eine Datei die heisst: debian-version
Der Inhalt ist nur:
4.0
Ok, wunderbar.
Dann führ jetzt mal folgendes Kommando aus und poste die Ausgabe hier im Forum.
ls -al /etc/init.d/
Ups der gibt einiges aus, wie kopier ich das aus Putty raus um es hier einzufügen? schäm..... :(
Ah, habs schon, folgendes gibt er aus:
total 412
drwxr-xr-x 2 root root 4096 2007-05-10 21:53 .
drwxr-xr-x 87 root root 4096 2007-10-14 23:36 ..
-rwxr-xr-x 1 root root 4351 2007-03-27 14:45 apache2
-rwxr-xr-x 1 root root 969 2006-03-18 20:13 atd
-rwxr-xr-x 1 root root 1621 2007-01-29 14:52 bind9
-rwxr-xr-x 1 root root 5089 2007-01-30 23:36 bootclean
-rwxr-xr-x 1 root root 2146 2007-01-30 23:36 bootlogd
-rwxr-xr-x 1 root root 1915 2007-01-30 23:36 bootmisc.sh
-rwxr-xr-x 1 root root 2930 2007-01-30 23:36 checkfs.sh
-rwxr-xr-x 1 root root 9548 2007-01-30 23:36 checkroot.sh
-rwxr-xr-x 1 root root 6110 2006-09-05 18:15 console-screen.sh
-rwxr-xr-x 1 root root 696 2006-09-09 23:42 courier-authdaemon
-rwxr-xr-x 1 root root 1734 2007-02-13 11:05 courier-imap
-rwxr-xr-x 1 root root 1955 2007-02-13 11:05 courier-imap-ssl
-rwxr-xr-x 1 root root 1571 2007-02-13 11:05 courier-pop
-rwxr-xr-x 1 root root 1923 2007-02-13 11:05 courier-pop-ssl
-rwxr-xr-x 1 root root 1761 2006-12-20 01:20 cron
-rwxr-xr-x 1 root root 1156 2006-10-07 22:39 dns-clean
-rwxr-xr-x 1 root root 7104 2007-01-20 11:19 exim4
-rwxr-xr-x 1 root root 5825 2007-02-21 14:33 glibc.sh
-rwxr-xr-x 1 root root 1360 2007-01-30 23:36 halt
-rwxr-xr-x 1 root root 9168 2007-02-17 04:52 hdparm
-rwxr-xr-x 1 root root 1287 2007-01-30 23:36 hostname.sh
-rwxr-xr-x 1 root root 3499 2005-05-02 23:02 hwclockfirst.sh
-rwxr-xr-x 1 root root 3886 2007-02-21 19:05 hwclock.sh
-rwxr-xr-x 1 root root 2518 2006-09-15 20:03 ifupdown
-rwxr-xr-x 1 root root 1046 2006-09-15 20:03 ifupdown-clean
-rwxr-xr-x 1 root root 222 2007-05-10 21:47 inetd
-rwxr-xr-x 1 root root 658 2005-04-11 00:35 initrd-tools.sh
-rwxr-xr-x 1 root root 3484 2006-10-16 05:38 keymap.sh
-rwxr-xr-x 1 root root 944 2007-01-30 23:36 killprocs
-rwxr-xr-x 1 root root 1375 2006-05-25 11:51 klogd
-rwxr-xr-x 1 root root 1303 2005-05-03 20:09 libdevmapper1.01
-rwxr-xr-x 1 root root 417 2006-08-06 23:18 libdevmapper1.02
-rwxr-xr-x 1 root root 946 2007-01-29 14:52 lwresd
-rwxr-xr-x 1 root root 1054 2006-09-06 23:43 makedev
-rwxr-xr-x 1 root root 1952 2007-02-24 17:06 mdadm
-rwxr-xr-x 1 root root 6087 2007-02-24 17:06 mdadm-raid
-rwxr-xr-x 1 root root 1793 2007-02-18 19:49 module-init-tools
-rwxr-xr-x 1 root root 737 2006-06-04 00:07 modutils
-rwxr-xr-x 1 root root 617 2007-01-30 23:36 mountall-bootclean.sh
-rwxr-xr-x 1 root root 1718 2007-01-30 23:36 mountall.sh
-rwxr-xr-x 1 root root 2206 2007-01-30 23:36 mountdevsubfs.sh
-rwxr-xr-x 1 root root 2394 2007-01-30 23:36 mountkernfs.sh
-rwxr-xr-x 1 root root 615 2007-01-30 23:36 mountnfs-bootclean.sh
-rwxr-xr-x 1 root root 2299 2007-01-30 23:36 mountnfs.sh
-rwxr-xr-x 1 root root 3668 2007-01-30 23:36 mtab.sh
-rwxr-xr-x 1 root root 6127 2007-05-10 19:52 mysql
-rwxr-xr-x 1 root root 2547 2007-03-19 09:29 mysql-ndb
-rwxr-xr-x 1 root root 1931 2007-03-19 09:29 mysql-ndb-mgm
-rwxr-xr-x 1 root root 2550 2007-01-06 16:36 networking
-rwxr-xr-x 1 root root 2649 2006-10-15 14:39 nviboot
-rwxr-xr-x 1 root root 2324 2007-03-21 19:21 openbsd-inetd
-rwxr-xr-x 1 root root 2974 2007-03-13 06:08 postfix
-rwxr-xr-x 1 root root 375 2007-03-17 23:35 pppd-dns
-rwxr-xr-x 1 root root 997 2006-09-13 04:23 procps.sh
-rwxr-xr-x 1 root root 2948 2007-03-12 12:20 quota
-rwxr-xr-x 1 root root 1492 2007-03-12 12:20 quotarpc
-rwxr-xr-x 1 root root 8045 2006-11-27 23:23 rc
-rwxr-xr-x 1 root root 798 2007-01-30 23:36 rc.local
-rwxr-xr-x 1 root root 117 2005-12-02 18:44 rcS
-rw-r--r-- 1 root root 1386 2006-09-13 08:10 README
-rwxr-xr-x 1 root root 655 2007-01-30 23:36 reboot
-rwxr-xr-x 1 root root 994 2007-01-30 23:36 rmnologin
-rwxr-xr-x 1 root root 5937 2006-12-13 22:50 saslauthd
-rwxr-xr-x 1 root root 1980 2005-10-10 07:37 saslauthd.dpkg-old
-rwxr-xr-x 1 root root 695 2007-03-05 09:34 screen-cleanup
-rwxr-xr-x 1 root root 1376 2007-01-30 23:36 sendsigs
-rwxr-xr-x 1 root root 585 2007-01-30 23:36 single
-rw-r--r-- 1 root root 4187 2007-01-30 23:36 skeleton
-rwxr-xr-x 1 root root 2250 2006-09-29 15:52 smartmontools
-rwxr-xr-x 1 root root 1548 2005-06-30 02:03 spamassassin
-rwxr-xr-x 1 root root 1891 2007-05-10 19:53 ssh
-rwxr-xr-x 1 root root 520 2007-01-30 23:36 stop-bootlogd
-rwxr-xr-x 1 root root 730 2007-01-30 23:36 stop-bootlogd-single
-rwxr-xr-x 1 root root 541 2006-04-15 20:26 sudo
-rwxr-xr-x 1 root root 2037 2006-05-25 11:51 sysklogd
-rwxr-xr-x 1 root root 8178 2007-03-24 19:35 udev
-rwxr-xr-x 1 root root 1252 2007-03-24 19:35 udev-mtab
-rwxr-xr-x 1 root root 3175 2007-01-30 23:36 umountfs
-rwxr-xr-x 1 root root 2128 2007-01-30 23:36 umountnfs.sh
-rwxr-xr-x 1 root root 1122 2007-01-30 23:36 umountroot
-rwxr-xr-x 1 root root 1815 2007-01-30 23:36 urandom
-rwxr-xr-x 1 root root 1382 2006-10-26 11:22 vsftpd
-rwxr-xr-x 1 root root 1182 2007-05-10 21:53 webmin
-rwxr-xr-x 1 root root 1805 2007-02-13 11:02 x11-common
-rwxr-xr-x 1 root root 1963 2005-02-11 08:11 xfree86-common
-rwxr-xr-x 1 root root 1481 2006-05-09 13:50 xinetd
manzano013:~#
Egal, schau einfach ob da irgendwo eines der folgende Dinge steht:
vsftpd
proftpd
pure-ftpd
Ja habe es ein Posting über Dir gepostet....
vsftpd ist dabei
Ok, dann gib mal folgendes ein:
/etc/init.d/vsftpd start
Der FTP-Server dürfte jetzt wieder laufen.
Habs ausgeführt, leider ändert es nix:
Im FTP-Programm kommt immer : unable to login, connection closed by the server....
Das ist doof.
Dann poste mal die Ausgabe von:
1. ps ax | grep vsftp
2. netstat -tulpen | grep vsftp
Gab es irgendwelche Fehler als du "/etc/init.d/vsftpd start" ausgeführt hast?
Es gab keine Fehler.
Nur die Bestätigung:
Starting FTP server: vsftpd.
Nach dem ersten Befehl, erhalte ich folgendes:
3647 pts/0 R+ 0:00 grep vsftp
Nach dem zweiten Befehl kommt keinerlei ausgabe nur eine neue Kommandozeile....
Ja, der Server läuft nicht.
Es kann auch sein das dieser über inetd bzw. xinetd gestartet wird.
Schau mal im Ordner /etc in die beiden Dateien "inetd.conf" & "xinetd.conf" rein, steht da irgendwas mit vsftpd drin?
Inhalt von inetd.conf:
# /etc/identd.conf - an example configuration file
#-- The syslog facility for error messages
# syslog:facility = daemon
#-- User and group (from passwd database) to run as
server:user = nobody
#-- Override the group id
# server:group = kmem
#-- What port to listen on when started as a daemon or from /etc/inittab
# server:port = 113
#-- The socket backlog limit
# server:backlog = 256
#-- Where to write the file containing our process id
# server:pid-file = "/var/run/identd/identd.pid"
#-- Maximum number of concurrent requests allowed (0 = unlimited)
# server:max-requests = 0
#-- Enable some protocol extensions like "VERSION" or "QUIT"
protocol:extensions = enabled
#-- Allow multiple queries per connection
protocol:multiquery = enabled
#-- Timeout in seconds since connection or last query. Zero = disable
# protocol:timeout = 120
#-- Maximum number of threads doing kernel lookups
# kernel:threads = 8
#-- Maximum number of queued kernel lookup requests
# kernel:buffers = 32
#-- Maximum number of time to retry a kernel lookup in case of failure
# kernel:attempts = 5
#-- Disable username lookups (only return uid numbers)
# result:uid-only = no
#-- Enable the ".noident" file
# result:noident = enabled
#-- Charset token to return in replies
# result:charset = "US-ASCII"
#-- Opsys token to return in replies
# result:opsys = "UNIX"
#-- Log all request replies to syslog (none == don't)
# result:syslog-level = none
#-- Enable encryption (only available if linked with a DES library)
# result:encrypt = no
#-- Path to the DES key file (only available if linked with a DES library)
# encrypt:key-file = "/usr/local/etc/identd.key"
#-- Include a machine local configuration file
# include = /etc/identd.conf
Inhalt von xinetd.conf
# Simple configuration file for xinetd
#
# Some defaults, and include /etc/xinetd.d/
defaults
{
# Please note that you need a log_type line to be able to use log_on_success
# and log_on_failure. The default is the following :
# log_type = SYSLOG daemon info
}
includedir /etc/xinetd.d
Da steht nix sinnvolles drin.
Ich würde jetzt mal die Logs nach eventuellen Fehlern durchsuchen, aber das wird dir nicht viel bringen, da du ja von der Materie nicht so viel Ahnung hast.
Also ich würde, wenn es nicht dringend ist, einfach warten bis Tomek wieder erreichbar ist oder ihn aus dem Bett klingeln... ;)
Also wenn ein Dienst nicht startet , dann schaut man als erstes in den Logs nach!
Meist fällt einen dann der Grund schon entgegen!
Also was steht den in der /var/log/vsftpd.log und /var/log/messages ?
Greeez Oli
Danke Dir erstmal, hoffe er ist morgen online.... weil meine das Problem war schomal da, dass nach einem Reboot der FTP-Server nicht mehr lief.... :D
Also wenn ein Dienst nicht startet , dann schaut man als erstes in den Logs nach!
Meist fällt einen dann der Grund schon entgegen!
Also was steht den in der /var/log/vsftpd.log und /var/log/messages ?
Greeez Oli
Hallo zyrusthc,
eine /var/log/vsftpd.log gibts garnicht.
In der /var/log/messages steht folgendes:
Oct 14 06:47:02 manzano013 syslogd 1.4.1#18: restart.
Oct 14 06:57:49 manzano013 -- MARK --
Oct 14 07:17:49 manzano013 -- MARK --
Oct 14 07:37:50 manzano013 -- MARK --
Oct 14 07:57:50 manzano013 -- MARK --
Oct 14 08:17:50 manzano013 -- MARK --
Oct 14 08:37:50 manzano013 -- MARK --
Oct 14 08:57:50 manzano013 -- MARK --
Oct 14 09:17:50 manzano013 -- MARK --
Oct 14 09:37:50 manzano013 -- MARK --
Oct 14 09:57:51 manzano013 -- MARK --
Oct 14 10:17:51 manzano013 -- MARK --
Oct 14 10:37:51 manzano013 -- MARK --
Oct 14 10:57:51 manzano013 -- MARK --
Oct 14 11:17:51 manzano013 -- MARK --
Oct 14 11:37:51 manzano013 -- MARK --
Oct 14 11:57:52 manzano013 -- MARK --
Oct 14 12:17:52 manzano013 -- MARK --
Oct 14 12:37:52 manzano013 -- MARK --
Oct 14 12:57:52 manzano013 -- MARK --
Oct 14 13:17:52 manzano013 -- MARK --
Oct 14 13:37:52 manzano013 -- MARK --
Oct 14 13:57:52 manzano013 -- MARK --
Oct 14 14:17:52 manzano013 -- MARK --
Oct 14 14:37:53 manzano013 -- MARK --
Oct 14 14:57:53 manzano013 -- MARK --
Oct 14 15:17:53 manzano013 -- MARK --
Oct 14 15:37:53 manzano013 -- MARK --
Oct 14 15:57:53 manzano013 -- MARK --
Oct 14 16:17:53 manzano013 -- MARK --
Oct 14 16:37:54 manzano013 -- MARK --
Oct 14 16:57:54 manzano013 -- MARK --
Oct 14 17:17:54 manzano013 -- MARK --
Oct 14 17:37:54 manzano013 -- MARK --
Oct 14 17:57:54 manzano013 -- MARK --
Oct 14 18:17:54 manzano013 -- MARK --
Oct 14 18:37:54 manzano013 -- MARK --
Oct 14 18:57:54 manzano013 -- MARK --
Oct 14 19:17:55 manzano013 -- MARK --
Oct 14 19:37:55 manzano013 -- MARK --
Oct 14 19:57:55 manzano013 -- MARK --
Oct 14 20:17:55 manzano013 -- MARK --
Oct 14 20:37:55 manzano013 -- MARK --
Oct 14 20:57:55 manzano013 -- MARK --
Oct 14 21:17:56 manzano013 -- MARK --
Oct 14 21:37:56 manzano013 -- MARK --
Oct 14 21:57:56 manzano013 -- MARK --
Oct 14 22:17:56 manzano013 -- MARK --
Oct 14 22:37:56 manzano013 -- MARK --
Oct 14 22:57:56 manzano013 -- MARK --
Oct 14 23:17:57 manzano013 -- MARK --
Oct 14 23:36:05 manzano013 shutdown[12810]: shutting down for system reboot
Oct 14 23:36:14 manzano013 kernel: Kernel logging (proc) stopped.
Oct 14 23:36:14 manzano013 kernel: Kernel log daemon terminating.
Oct 14 23:36:15 manzano013 exiting on signal 15
Oct 14 23:37:02 manzano013 syslogd 1.4.1#18: restart.
Oct 14 23:37:02 manzano013 kernel: klogd 1.4.1#18, log source = /proc/kmsg started.
Oct 14 23:37:02 manzano013 kernel: Bootdata ok (command line is root=/dev/md1 ro console=tty0 panic=30)
Oct 14 23:37:02 manzano013 kernel: Linux version 2.6.18-4-amd64 (Debian 2.6.18.dfsg.1-12etch1) (dannf@debian.org) (gcc version 4.1.2 20061115 (prerelease) (Debian 4.1.1-21)) #1 SMP Wed Apr 18 17:35:10 UTC 2007
Oct 14 23:37:02 manzano013 kernel: BIOS-provided physical RAM map:
Oct 14 23:37:02 manzano013 kernel: BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
Oct 14 23:37:02 manzano013 kernel: BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
Oct 14 23:37:02 manzano013 kernel: BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
Oct 14 23:37:02 manzano013 kernel: BIOS-e820: 0000000000100000 - 000000007fef0000 (usable)
Oct 14 23:37:02 manzano013 kernel: BIOS-e820: 000000007fef0000 - 000000007fef3000 (ACPI NVS)
Oct 14 23:37:02 manzano013 kernel: BIOS-e820: 000000007fef3000 - 000000007ff00000 (ACPI data)
Oct 14 23:37:02 manzano013 kernel: BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
Oct 14 23:37:02 manzano013 kernel: DMI 2.3 present.
Oct 14 23:37:02 manzano013 kernel: Scanning NUMA topology in Northbridge 24
Oct 14 23:37:02 manzano013 kernel: Number of nodes 1
Oct 14 23:37:02 manzano013 kernel: Node 0 MemBase 0000000000000000 Limit 000000007fef0000
Oct 14 23:37:02 manzano013 kernel: Using node hash shift of 63
Oct 14 23:37:02 manzano013 kernel: Bootmem setup node 0 0000000000000000-000000007fef0000
Oct 14 23:37:02 manzano013 kernel: ACPI: PM-Timer IO Port: 0x4008
Oct 14 23:37:02 manzano013 kernel: ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Oct 14 23:37:02 manzano013 kernel: Processor #0 15:7 APIC version 16
Oct 14 23:37:02 manzano013 kernel: ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
Oct 14 23:37:02 manzano013 kernel: ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
Oct 14 23:37:02 manzano013 kernel: ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
Oct 14 23:37:02 manzano013 kernel: ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
Oct 14 23:37:02 manzano013 kernel: IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23
Oct 14 23:37:02 manzano013 kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
Oct 14 23:37:02 manzano013 kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
Oct 14 23:37:02 manzano013 kernel: Setting APIC routing to physical flat
Oct 14 23:37:02 manzano013 kernel: Using ACPI (MADT) for SMP configuration information
Oct 14 23:37:02 manzano013 kernel: Allocating PCI resources starting at 80000000 (gap: 7ff00000:7ed00000)
Oct 14 23:37:02 manzano013 kernel: SMP: Allowing 2 CPUs, 1 hotplug CPUs
Oct 14 23:37:02 manzano013 kernel: Built 1 zonelists. Total pages: 515868
Oct 14 23:37:02 manzano013 kernel: Kernel command line: root=/dev/md1 ro console=tty0 panic=30
Oct 14 23:37:02 manzano013 kernel: Initializing CPU#0
Oct 14 23:37:02 manzano013 kernel: PID hash table entries: 4096 (order: 12, 32768 bytes)
Oct 14 23:37:02 manzano013 kernel: time.c: Using 3.579545 MHz WALL PM GTOD PIT/TSC timer.
Oct 14 23:37:02 manzano013 kernel: time.c: Detected 2199.834 MHz processor.
Oct 14 23:37:02 manzano013 kernel: Console: colour VGA+ 80x25
Oct 14 23:37:02 manzano013 kernel: Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
Oct 14 23:37:02 manzano013 kernel: Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
Oct 14 23:37:02 manzano013 kernel: Checking aperture...
Oct 14 23:37:02 manzano013 kernel: CPU 0: aperture @ e8000000 size 128 MB
Oct 14 23:37:02 manzano013 kernel: Memory: 2055100k/2096064k available (1930k kernel code, 40576k reserved, 868k data, 176k init)
Oct 14 23:37:02 manzano013 kernel: Calibrating delay using timer specific routine.. 4404.54 BogoMIPS (lpj=8809086)
Oct 14 23:37:02 manzano013 kernel: Security Framework v1.0.0 initialized
Oct 14 23:37:02 manzano013 kernel: SELinux: Disabled at boot.
Oct 14 23:37:02 manzano013 kernel: Capability LSM initialized
Oct 14 23:37:02 manzano013 kernel: Mount-cache hash table entries: 256
Oct 14 23:37:02 manzano013 kernel: CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
Oct 14 23:37:02 manzano013 kernel: CPU: L2 Cache: 1024K (64 bytes/line)
Oct 14 23:37:02 manzano013 kernel: CPU 0/0 -> Node 0
Oct 14 23:37:02 manzano013 kernel: SMP alternatives: switching to UP code
Oct 14 23:37:02 manzano013 kernel: ACPI: Core revision 20060707
Oct 14 23:37:02 manzano013 kernel: Using local APIC timer interrupts.
Oct 14 23:37:02 manzano013 kernel: result 12499057
Oct 14 23:37:02 manzano013 kernel: Detected 12.499 MHz APIC timer.
Oct 14 23:37:02 manzano013 kernel: Brought up 1 CPUs
Oct 14 23:37:02 manzano013 kernel: testing NMI watchdog ... OK.
Oct 14 23:37:02 manzano013 kernel: migration_cost=0
Oct 14 23:37:02 manzano013 kernel: checking if image is initramfs... it is
Oct 14 23:37:02 manzano013 kernel: Freeing initrd memory: 5122k freed
Oct 14 23:37:02 manzano013 kernel: NET: Registered protocol family 16
Oct 14 23:37:02 manzano013 kernel: ACPI: bus type pci registered
Oct 14 23:37:02 manzano013 kernel: PCI: Using configuration type 1
Oct 14 23:37:02 manzano013 kernel: ACPI: Interpreter enabled
Oct 14 23:37:02 manzano013 kernel: ACPI: Using IOAPIC for interrupt routing
Oct 14 23:37:02 manzano013 kernel: ACPI: PCI Root Bridge [PCI0] (0000:00)
Oct 14 23:37:02 manzano013 kernel: PCI: MSI-K8T-Neo2Fir, attempting to turn soundcard ON
Oct 14 23:37:02 manzano013 kernel: PCI: MSI-K8T-Neo2Fir, soundcard on
Oct 14 23:37:02 manzano013 kernel: ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12)
Oct 14 23:37:02 manzano013 kernel: ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 6 7 10 *11 12)
Oct 14 23:37:02 manzano013 kernel: ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 11 *12)
Oct 14 23:37:02 manzano013 kernel: ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 11 12) *0, disabled.
Oct 14 23:37:02 manzano013 kernel: ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12) *0, disabled.
Oct 14 23:37:02 manzano013 kernel: ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12) *0, disabled.
Oct 14 23:37:02 manzano013 kernel: ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 6 7 10 11 12) *0, disabled.
Oct 14 23:37:02 manzano013 kernel: ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 6 7 10 11 12) *0, disabled.
Oct 14 23:37:02 manzano013 kernel: ACPI: PCI Interrupt Link [ALKA] (IRQs *20), disabled.
Oct 14 23:37:02 manzano013 kernel: ACPI: PCI Interrupt Link [ALKB] (IRQs *21)
Oct 14 23:37:02 manzano013 kernel: ACPI: PCI Interrupt Link [ALKC] (IRQs *22)
Oct 14 23:37:02 manzano013 kernel: ACPI: PCI Interrupt Link [ALKD] (IRQs *23), disabled.
Oct 14 23:37:02 manzano013 kernel: Linux Plug and Play Support v0.97 (c) Adam Belay
Oct 14 23:37:02 manzano013 kernel: pnp: PnP ACPI init
Oct 14 23:37:02 manzano013 kernel: pnp: PnP ACPI: found 11 devices
Oct 14 23:37:02 manzano013 kernel: usbcore: registered new driver usbfs
Oct 14 23:37:02 manzano013 kernel: usbcore: registered new driver hub
Oct 14 23:37:02 manzano013 kernel: PCI: Using ACPI for IRQ routing
Oct 14 23:37:02 manzano013 kernel: PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
Oct 14 23:37:02 manzano013 kernel: agpgart: Detected AGP bridge 0
Oct 14 23:37:02 manzano013 kernel: agpgart: AGP aperture is 128M @ 0xe8000000
Oct 14 23:37:02 manzano013 kernel: PCI-DMA: Disabling IOMMU.
Oct 14 23:37:02 manzano013 kernel: pnp: 00:02: ioport range 0x4000-0x407f could not be reserved
Oct 14 23:37:02 manzano013 kernel: pnp: 00:02: ioport range 0x5000-0x500f has been reserved
Oct 14 23:37:02 manzano013 kernel: PCI: Bridge: 0000:00:01.0
Oct 14 23:37:02 manzano013 kernel: IO window: disabled.
Oct 14 23:37:02 manzano013 kernel: MEM window: f8000000-f9ffffff
Oct 14 23:37:02 manzano013 kernel: PREFETCH window: f0000000-f7ffffff
Oct 14 23:37:02 manzano013 kernel: NET: Registered protocol family 2
Oct 14 23:37:02 manzano013 kernel: IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
Oct 14 23:37:02 manzano013 kernel: TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
Oct 14 23:37:02 manzano013 kernel: TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
Oct 14 23:37:02 manzano013 kernel: TCP: Hash tables configured (established 262144 bind 65536)
Oct 14 23:37:02 manzano013 kernel: TCP reno registered
Oct 14 23:37:02 manzano013 kernel: audit: initializing netlink socket (disabled)
Oct 14 23:37:02 manzano013 kernel: audit(1192405010.676:1): initialized
Oct 14 23:37:02 manzano013 kernel: VFS: Disk quotas dquot_6.5.1
Oct 14 23:37:02 manzano013 kernel: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
Oct 14 23:37:02 manzano013 kernel: Initializing Cryptographic API
Oct 14 23:37:02 manzano013 kernel: io scheduler noop registered
Oct 14 23:37:02 manzano013 kernel: io scheduler anticipatory registered
Oct 14 23:37:02 manzano013 kernel: io scheduler deadline registered
Oct 14 23:37:02 manzano013 kernel: io scheduler cfq registered (default)
Oct 14 23:37:02 manzano013 kernel: Real Time Clock Driver v1.12ac
Oct 14 23:37:02 manzano013 kernel: Linux agpgart interface v0.101 (c) Dave Jones
Oct 14 23:37:02 manzano013 kernel: Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
Oct 14 23:37:02 manzano013 kernel: serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Oct 14 23:37:02 manzano013 kernel: serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
Oct 14 23:37:02 manzano013 kernel: 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Oct 14 23:37:02 manzano013 kernel: 00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
Oct 14 23:37:02 manzano013 kernel: RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
Oct 14 23:37:02 manzano013 kernel: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
Oct 14 23:37:02 manzano013 kernel: PNP: PS/2 controller doesn't have AUX irq; using default 12
Oct 14 23:37:02 manzano013 kernel: serio: i8042 AUX port at 0x60,0x64 irq 12
Oct 14 23:37:02 manzano013 kernel: serio: i8042 KBD port at 0x60,0x64 irq 1
Oct 14 23:37:02 manzano013 kernel: mice: PS/2 mouse device common for all mice
Oct 14 23:37:02 manzano013 kernel: TCP bic registered
Oct 14 23:37:02 manzano013 kernel: NET: Registered protocol family 1
Oct 14 23:37:02 manzano013 kernel: NET: Registered protocol family 17
Oct 14 23:37:02 manzano013 kernel: NET: Registered protocol family 8
Oct 14 23:37:02 manzano013 kernel: NET: Registered protocol family 20
Oct 14 23:37:02 manzano013 kernel: ACPI: (supports S0 S1 S3 S4 S5)
Oct 14 23:37:02 manzano013 kernel: Freeing unused kernel memory: 176k freed
Oct 14 23:37:02 manzano013 kernel: ACPI Exception (acpi_processor-0681): AE_NOT_FOUND, Processor Device is not present [20060707]
Oct 14 23:37:02 manzano013 kernel: GSI 16 sharing vector 0xA9 and IRQ 16
Oct 14 23:37:02 manzano013 kernel: ACPI: PCI Interrupt 0000:00:09.0[A] -> GSI 17 (level, low) -> IRQ 169
Oct 14 23:37:02 manzano013 kernel: 3c59x: Donald Becker and others. www.scyld.com/network/vortex.html
Oct 14 23:37:02 manzano013 kernel: 0000:00:09.0: 3Com PCI 3c905C Tornado at ffffc20000004000.
Oct 14 23:37:02 manzano013 kernel: Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
Oct 14 23:37:02 manzano013 kernel: ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Oct 14 23:37:02 manzano013 kernel: VP_IDE: IDE controller at PCI slot 0000:00:0f.0
Oct 14 23:37:02 manzano013 kernel: ACPI: PCI Interrupt Link [ALKA] disabled and referenced, BIOS bug
Oct 14 23:37:02 manzano013 kernel: ACPI: PCI Interrupt Link [ALKA] enabled at IRQ 20
Oct 14 23:37:02 manzano013 kernel: GSI 17 sharing vector 0xB1 and IRQ 17
Oct 14 23:37:02 manzano013 kernel: ACPI: PCI Interrupt 0000:00:0f.0[A] -> Link [ALKA] -> GSI 20 (level, low) -> IRQ 177
Oct 14 23:37:02 manzano013 kernel: PCI: VIA IRQ fixup for 0000:00:0f.0, from 255 to 1
Oct 14 23:37:02 manzano013 kernel: VP_IDE: chipset revision 6
Oct 14 23:37:02 manzano013 kernel: VP_IDE: not 100%% native mode: will probe irqs later
Oct 14 23:37:02 manzano013 kernel: VP_IDE: VIA vt8237 (rev 00) IDE UDMA133 controller on pci0000:00:0f.0
Oct 14 23:37:02 manzano013 kernel: ide0: BM-DMA at 0xe200-0xe207, BIOS settings: hda:DMA, hdb:pio
Oct 14 23:37:02 manzano013 kernel: ide1: BM-DMA at 0xe208-0xe20f, BIOS settings: hdc:DMA, hdd:pio
Oct 14 23:37:02 manzano013 kernel: USB Universal Host Controller Interface driver v3.0
Oct 14 23:37:02 manzano013 kernel: input: AT Translated Set 2 keyboard as /class/input/input0
Oct 14 23:37:02 manzano013 kernel: input: AT Translated Set 2 keyboard as /class/input/input1
Oct 14 23:37:02 manzano013 kernel: hda: ST3160812A, ATA DISK drive
Oct 14 23:37:02 manzano013 kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Oct 14 23:37:02 manzano013 kernel: hdc: ST3160812A, ATA DISK drive
Oct 14 23:37:02 manzano013 kernel: ide1 at 0x170-0x177,0x376 on irq 15
Oct 14 23:37:02 manzano013 kernel: ACPI: PCI Interrupt Link [ALKB] enabled at IRQ 21
Oct 14 23:37:02 manzano013 kernel: GSI 18 sharing vector 0xB9 and IRQ 18
Oct 14 23:37:02 manzano013 kernel: ACPI: PCI Interrupt 0000:00:10.0[A] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 185
Oct 14 23:37:02 manzano013 kernel: PCI: VIA IRQ fixup for 0000:00:10.0, from 10 to 9
Oct 14 23:37:02 manzano013 kernel: uhci_hcd 0000:00:10.0: UHCI Host Controller
Oct 14 23:37:02 manzano013 kernel: uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
Oct 14 23:37:02 manzano013 kernel: uhci_hcd 0000:00:10.0: irq 185, io base 0x0000e300
Oct 14 23:37:02 manzano013 kernel: usb usb1: configuration #1 chosen from 1 choice
Oct 14 23:37:02 manzano013 kernel: hub 1-0:1.0: USB hub found
Oct 14 23:37:02 manzano013 kernel: hub 1-0:1.0: 2 ports detected
Oct 14 23:37:02 manzano013 kernel: hda: max request size: 512KiB
Oct 14 23:37:02 manzano013 kernel: hda: 312581808 sectors (160041 MB) w/8192KiB Cache, CHS=19457/255/63, UDMA(100)
Oct 14 23:37:02 manzano013 kernel: hda: cache flushes supported
Oct 14 23:37:02 manzano013 kernel: hda: hda1 hda2 hda3
Oct 14 23:37:02 manzano013 kernel: ACPI: PCI Interrupt 0000:00:10.1[A] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 185
Oct 14 23:37:02 manzano013 kernel: PCI: VIA IRQ fixup for 0000:00:10.1, from 10 to 9
Oct 14 23:37:02 manzano013 kernel: uhci_hcd 0000:00:10.1: UHCI Host Controller
Oct 14 23:37:02 manzano013 kernel: uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2
Oct 14 23:37:02 manzano013 kernel: uhci_hcd 0000:00:10.1: irq 185, io base 0x0000e400
Oct 14 23:37:02 manzano013 kernel: usb usb2: configuration #1 chosen from 1 choice
Oct 14 23:37:02 manzano013 kernel: hub 2-0:1.0: USB hub found
Oct 14 23:37:02 manzano013 kernel: hub 2-0:1.0: 2 ports detected
Oct 14 23:37:02 manzano013 kernel: hdc: max request size: 512KiB
Oct 14 23:37:02 manzano013 kernel: hdc: 312581808 sectors (160041 MB) w/8192KiB Cache, CHS=19457/255/63, UDMA(100)
Oct 14 23:37:02 manzano013 kernel: hdc: cache flushes supported
Oct 14 23:37:02 manzano013 kernel: hdc:<6>ACPI: PCI Interrupt 0000:00:10.2[B] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 185
Oct 14 23:37:02 manzano013 kernel: PCI: VIA IRQ fixup for 0000:00:10.2, from 11 to 9
Oct 14 23:37:02 manzano013 kernel: uhci_hcd 0000:00:10.2: UHCI Host Controller
Oct 14 23:37:02 manzano013 kernel: uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3
Oct 14 23:37:02 manzano013 kernel: uhci_hcd 0000:00:10.2: irq 185, io base 0x0000e500
Oct 14 23:37:02 manzano013 kernel: usb usb3: configuration #1 chosen from 1 choice
Oct 14 23:37:02 manzano013 kernel: hub 3-0:1.0: USB hub found
Oct 14 23:37:02 manzano013 kernel: hub 3-0:1.0: 2 ports detected
Oct 14 23:37:02 manzano013 kernel: hdc1 hdc2 hdc3
Oct 14 23:37:02 manzano013 kernel: ACPI: PCI Interrupt 0000:00:10.3[B] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 185
Oct 14 23:37:02 manzano013 kernel: PCI: VIA IRQ fixup for 0000:00:10.3, from 11 to 9
Oct 14 23:37:02 manzano013 kernel: uhci_hcd 0000:00:10.3: UHCI Host Controller
Oct 14 23:37:02 manzano013 kernel: uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 4
Oct 14 23:37:02 manzano013 kernel: uhci_hcd 0000:00:10.3: irq 185, io base 0x0000e600
Oct 14 23:37:02 manzano013 kernel: usb usb4: configuration #1 chosen from 1 choice
Oct 14 23:37:02 manzano013 kernel: hub 4-0:1.0: USB hub found
Oct 14 23:37:02 manzano013 kernel: hub 4-0:1.0: 2 ports detected
Oct 14 23:37:02 manzano013 kernel: ACPI: PCI Interrupt 0000:00:10.4[C] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 185
Oct 14 23:37:02 manzano013 kernel: PCI: VIA IRQ fixup for 0000:00:10.4, from 12 to 9
Oct 14 23:37:02 manzano013 kernel: ehci_hcd 0000:00:10.4: EHCI Host Controller
Oct 14 23:37:02 manzano013 kernel: ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 5
Oct 14 23:37:02 manzano013 kernel: ehci_hcd 0000:00:10.4: irq 185, io mem 0xfa021000
Oct 14 23:37:02 manzano013 kernel: ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
Oct 14 23:37:02 manzano013 kernel: usb usb5: configuration #1 chosen from 1 choice
Oct 14 23:37:02 manzano013 kernel: hub 5-0:1.0: USB hub found
Oct 14 23:37:02 manzano013 kernel: hub 5-0:1.0: 8 ports detected
Oct 14 23:37:02 manzano013 kernel: md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
Oct 14 23:37:02 manzano013 kernel: md: bitmap version 4.39
Oct 14 23:37:02 manzano013 kernel: md: raid1 personality registered for level 1
Oct 14 23:37:02 manzano013 kernel: md: md1 stopped.
Oct 14 23:37:02 manzano013 kernel: md: bind<hdc2>
Oct 14 23:37:02 manzano013 kernel: md: bind<hda2>
Oct 14 23:37:02 manzano013 kernel: raid1: raid set md1 active with 2 out of 2 mirrors
Oct 14 23:37:02 manzano013 kernel: Attempting manual resume
Oct 14 23:37:02 manzano013 kernel: kjournald starting. Commit interval 5 seconds
Oct 14 23:37:02 manzano013 kernel: EXT3-fs: mounted filesystem with ordered data mode.
Oct 14 23:37:02 manzano013 kernel: pci_hotplug: PCI Hot Plug PCI Core version: 0.5
Oct 14 23:37:02 manzano013 kernel: shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
Oct 14 23:37:02 manzano013 kernel: input: PC Speaker as /class/input/input2
Oct 14 23:37:02 manzano013 kernel: atkbd.c: Spurious ACK on isa0060/serio0. Some program might be trying access hardware directly.
Oct 14 23:37:02 manzano013 kernel: hdc: set_drive_speed_status: status=0x58 { DriveReady SeekComplete DataRequest }
Oct 14 23:37:02 manzano013 kernel: hda: dma_intr: status=0xd0 { Busy }
Oct 14 23:37:02 manzano013 kernel: ide: failed opcode was: unknown
Oct 14 23:37:02 manzano013 kernel: hda: DMA disabled
Oct 14 23:37:02 manzano013 kernel: hda: set_drive_speed_status: status=0x58 { DriveReady SeekComplete DataRequest }
Oct 14 23:37:02 manzano013 kernel: ide: failed opcode was: unknown
Oct 14 23:37:02 manzano013 kernel: ide0: reset: success
Oct 14 23:37:02 manzano013 kernel: Via 686a/8233/8235 audio driver 1.9.1-ac4-2.5
Oct 14 23:37:02 manzano013 kernel: PCI: Enabling device 0000:00:11.5 (0000 -> 0001)
Oct 14 23:37:02 manzano013 kernel: ACPI: PCI Interrupt Link [ALKC] enabled at IRQ 22
Oct 14 23:37:02 manzano013 kernel: GSI 19 sharing vector 0xC1 and IRQ 19
Oct 14 23:37:02 manzano013 kernel: ACPI: PCI Interrupt 0000:00:11.5[C] -> Link [ALKC] -> GSI 22 (level, low) -> IRQ 193
Oct 14 23:37:02 manzano013 kernel: via82cxxx: Six channel audio available
Oct 14 23:37:02 manzano013 kernel: ac97_codec: AC97 codec, id: ALG96 (Unknown)
Oct 14 23:37:02 manzano013 kernel: via82cxxx: Codec rate locked at 48Khz
Oct 14 23:37:02 manzano013 kernel: via82cxxx: board #1 at 0x1000, IRQ 193
Oct 14 23:37:02 manzano013 kernel: Adding 514072k swap on /dev/hda3. Priority:42 extents:1 across:514072k
Oct 14 23:37:02 manzano013 kernel: Adding 514072k swap on /dev/hdc3. Priority:42 extents:1 across:514072k
Oct 14 23:37:02 manzano013 kernel: EXT3 FS on md1, internal journal
Oct 14 23:37:02 manzano013 kernel: device-mapper: ioctl: 4.7.0-ioctl (2006-06-24) initialised: dm-devel@redhat.com
Oct 14 23:37:02 manzano013 kernel: md: md0 stopped.
Oct 14 23:37:02 manzano013 kernel: md: bind<hdc1>
Oct 14 23:37:02 manzano013 kernel: md: bind<hda1>
Oct 14 23:37:02 manzano013 kernel: raid1: raid set md0 active with 2 out of 2 mirrors
Oct 14 23:37:02 manzano013 kernel: kjournald starting. Commit interval 5 seconds
Oct 14 23:37:02 manzano013 kernel: EXT3 FS on md0, internal journal
Oct 14 23:37:02 manzano013 kernel: EXT3-fs: mounted filesystem with ordered data mode.
Oct 14 23:37:02 manzano013 kernel: eth0: setting full-duplex.
Oct 14 23:37:02 manzano013 kernel: NET: Registered protocol family 10
Oct 14 23:37:02 manzano013 kernel: lo: Disabled Privacy Extensions
Oct 14 23:37:02 manzano013 kernel: IPv6 over IPv4 tunneling driver
Oct 14 23:57:01 manzano013 -- MARK --
Oct 15 00:17:01 manzano013 -- MARK --
Oct 15 00:37:02 manzano013 -- MARK --
Oct 15 00:57:02 manzano013 -- MARK --
eine /var/log/vsftpd.log gibts garnicht.
Gibt es vielleicht ein Verzeichnis /var/log/vsftpd oder /var/log/ftp wo die Datei drin exitiert?
Oder mach einfach mal ein:
find /var/log -name vsftpd.log -type f
Beide Verzeichnisse existieren nicht.
Der Befehl brachte keinerlei Ausgabe :( schade...
Gibt es eine vsftpd.conf in /etc ?
find /etc -name vsftpd.conf -type f
Ja unter /etc/vsftpd.conf
Sie hat folgenden Inhalt:
#### CONFIXX VSFTPD KONFIGURATIONSDATEI ####
#### erstellt am Thu May 10 20:41:38 2007 ###
anonymous_enable=NO
local_enable=YES
write_enable=YES
local_umask=022
xferlog_enable=YES
xferlog_file=/var/log/xferlog
xferlog_std_format=YES
ascii_upload_enable=YES
ascii_download_enable=YES
ls_recurse_enable=YES
connect_from_port_20=YES
chroot_local_user=YES
userlist_enable=YES
userlist_file=/etc/chrootUsers
userlist_deny=NO
pam_service_name=vsftpd
#
# The following directive shows allways dot-files.
# vsftpd of version less than 1.1.3 does not support feature 'force_dot_files'.
# If your vsftpd has this feature then
# remove commenting mark ('#') to activate the directive below.
#
#force_dot_files=YES
### ENDE ####
listen=YES
OK , Jetzt wirf mal einen Blick in die /var/log/xferlog.
Desweiteren hatte ich vergessen das es bei Debian auch noch eine /var/log/daemon.log gibt.
Schau in diese auch mal rein.
Deamon.log
Oct 14 07:08:38 manzano013 smartd[5321]: Device: /dev/hda, SMART Usage Attribute: 190 Unknown_Attribute changed from 77 to 78
Oct 14 07:08:38 manzano013 smartd[5321]: Device: /dev/hda, SMART Usage Attribute: 194 Temperature_Celsius changed from 23 to 22
Oct 14 07:08:38 manzano013 smartd[5321]: Device: /dev/hdc, SMART Usage Attribute: 190 Unknown_Attribute changed from 78 to 79
Oct 14 07:08:38 manzano013 smartd[5321]: Device: /dev/hdc, SMART Usage Attribute: 194 Temperature_Celsius changed from 22 to 21
Oct 14 07:38:38 manzano013 smartd[5321]: Device: /dev/hda, SMART Usage Attribute: 190 Unknown_Attribute changed from 78 to 77
Oct 14 07:38:38 manzano013 smartd[5321]: Device: /dev/hda, SMART Usage Attribute: 194 Temperature_Celsius changed from 22 to 23
Oct 14 08:38:39 manzano013 smartd[5321]: Device: /dev/hda, SMART Usage Attribute: 190 Unknown_Attribute changed from 77 to 78
Oct 14 08:38:39 manzano013 smartd[5321]: Device: /dev/hda, SMART Usage Attribute: 194 Temperature_Celsius changed from 23 to 22
Oct 14 09:08:38 manzano013 smartd[5321]: Device: /dev/hda, SMART Usage Attribute: 190 Unknown_Attribute changed from 78 to 77
Oct 14 09:08:38 manzano013 smartd[5321]: Device: /dev/hda, SMART Usage Attribute: 194 Temperature_Celsius changed from 22 to 23
Oct 14 09:38:38 manzano013 smartd[5321]: Device: /dev/hda, SMART Usage Attribute: 190 Unknown_Attribute changed from 77 to 78
Oct 14 09:38:38 manzano013 smartd[5321]: Device: /dev/hda, SMART Usage Attribute: 194 Temperature_Celsius changed from 23 to 22
Oct 14 12:23:07 manzano013 ntpdate[6910]: step time server 80.86.90.28 offset -0.287249 sec
Oct 14 13:08:38 manzano013 smartd[5321]: Device: /dev/hdc, SMART Usage Attribute: 190 Unknown_Attribute changed from 79 to 80
Oct 14 13:08:38 manzano013 smartd[5321]: Device: /dev/hdc, SMART Usage Attribute: 194 Temperature_Celsius changed from 21 to 20
Oct 14 13:38:38 manzano013 smartd[5321]: Device: /dev/hdc, SMART Usage Attribute: 190 Unknown_Attribute changed from 80 to 79
Oct 14 13:38:38 manzano013 smartd[5321]: Device: /dev/hdc, SMART Usage Attribute: 194 Temperature_Celsius changed from 20 to 21
Oct 14 14:38:38 manzano013 smartd[5321]: Device: /dev/hdc, SMART Usage Attribute: 190 Unknown_Attribute changed from 79 to 80
Oct 14 14:38:38 manzano013 smartd[5321]: Device: /dev/hdc, SMART Usage Attribute: 194 Temperature_Celsius changed from 21 to 20
Oct 14 15:08:38 manzano013 smartd[5321]: Device: /dev/hda, SMART Usage Attribute: 190 Unknown_Attribute changed from 78 to 79
Oct 14 15:08:38 manzano013 smartd[5321]: Device: /dev/hda, SMART Usage Attribute: 194 Temperature_Celsius changed from 22 to 21
Oct 14 15:38:38 manzano013 smartd[5321]: Device: /dev/hda, SMART Usage Attribute: 190 Unknown_Attribute changed from 79 to 77
Oct 14 15:38:38 manzano013 smartd[5321]: Device: /dev/hda, SMART Usage Attribute: 194 Temperature_Celsius changed from 21 to 23
Oct 14 15:38:38 manzano013 smartd[5321]: Device: /dev/hdc, SMART Usage Attribute: 190 Unknown_Attribute changed from 80 to 78
Oct 14 15:38:38 manzano013 smartd[5321]: Device: /dev/hdc, SMART Usage Attribute: 194 Temperature_Celsius changed from 20 to 22
Oct 14 16:08:38 manzano013 smartd[5321]: Device: /dev/hda, SMART Usage Attribute: 190 Unknown_Attribute changed from 77 to 78
Oct 14 16:08:38 manzano013 smartd[5321]: Device: /dev/hda, SMART Usage Attribute: 194 Temperature_Celsius changed from 23 to 22
Oct 14 16:08:39 manzano013 smartd[5321]: Device: /dev/hdc, SMART Usage Attribute: 190 Unknown_Attribute changed from 78 to 80
Oct 14 16:08:39 manzano013 smartd[5321]: Device: /dev/hdc, SMART Usage Attribute: 194 Temperature_Celsius changed from 22 to 20
Oct 14 16:38:38 manzano013 smartd[5321]: Device: /dev/hdc, SMART Usage Attribute: 190 Unknown_Attribute changed from 80 to 79
Oct 14 16:38:38 manzano013 smartd[5321]: Device: /dev/hdc, SMART Usage Attribute: 194 Temperature_Celsius changed from 20 to 21
Oct 14 17:38:38 manzano013 smartd[5321]: Device: /dev/hdc, SMART Usage Attribute: 190 Unknown_Attribute changed from 79 to 80
Oct 14 17:38:38 manzano013 smartd[5321]: Device: /dev/hdc, SMART Usage Attribute: 194 Temperature_Celsius changed from 21 to 20
Oct 14 18:23:07 manzano013 ntpdate[9541]: step time server 80.86.90.28 offset -0.284927 sec
Oct 14 18:38:38 manzano013 smartd[5321]: Device: /dev/hda, SMART Usage Attribute: 190 Unknown_Attribute changed from 78 to 77
Oct 14 18:38:38 manzano013 smartd[5321]: Device: /dev/hda, SMART Usage Attribute: 194 Temperature_Celsius changed from 22 to 23
Oct 14 18:38:38 manzano013 smartd[5321]: Device: /dev/hdc, SMART Usage Attribute: 190 Unknown_Attribute changed from 80 to 78
Oct 14 18:38:38 manzano013 smartd[5321]: Device: /dev/hdc, SMART Usage Attribute: 194 Temperature_Celsius changed from 20 to 22
Oct 14 19:08:38 manzano013 smartd[5321]: Device: /dev/hda, SMART Usage Attribute: 190 Unknown_Attribute changed from 77 to 78
Oct 14 19:08:38 manzano013 smartd[5321]: Device: /dev/hda, SMART Usage Attribute: 194 Temperature_Celsius changed from 23 to 22
Oct 14 19:08:39 manzano013 smartd[5321]: Device: /dev/hdc, SMART Usage Attribute: 190 Unknown_Attribute changed from 78 to 79
Oct 14 19:08:39 manzano013 smartd[5321]: Device: /dev/hdc, SMART Usage Attribute: 194 Temperature_Celsius changed from 22 to 21
Oct 14 19:38:38 manzano013 smartd[5321]: Device: /dev/hdc, SMART Usage Attribute: 190 Unknown_Attribute changed from 79 to 80
Oct 14 19:38:38 manzano013 smartd[5321]: Device: /dev/hdc, SMART Usage Attribute: 194 Temperature_Celsius changed from 21 to 20
Oct 14 20:08:38 manzano013 smartd[5321]: Device: /dev/hda, SMART Usage Attribute: 190 Unknown_Attribute changed from 78 to 76
Oct 14 20:08:38 manzano013 smartd[5321]: Device: /dev/hda, SMART Usage Attribute: 194 Temperature_Celsius changed from 22 to 24
Oct 14 20:08:38 manzano013 smartd[5321]: Device: /dev/hdc, SMART Usage Attribute: 190 Unknown_Attribute changed from 80 to 77
Oct 14 20:08:38 manzano013 smartd[5321]: Device: /dev/hdc, SMART Usage Attribute: 194 Temperature_Celsius changed from 20 to 23
Oct 14 20:11:04 manzano013 named[2096]: loading configuration from '/etc/bind/named.conf'
Oct 14 20:38:38 manzano013 smartd[5321]: Device: /dev/hda, SMART Usage Attribute: 190 Unknown_Attribute changed from 76 to 78
Oct 14 20:38:38 manzano013 smartd[5321]: Device: /dev/hda, SMART Usage Attribute: 194 Temperature_Celsius changed from 24 to 22
Oct 14 20:38:38 manzano013 smartd[5321]: Device: /dev/hdc, SMART Usage Attribute: 190 Unknown_Attribute changed from 77 to 79
Oct 14 20:38:38 manzano013 smartd[5321]: Device: /dev/hdc, SMART Usage Attribute: 194 Temperature_Celsius changed from 23 to 21
Oct 14 21:08:38 manzano013 smartd[5321]: Device: /dev/hdc, SMART Usage Attribute: 190 Unknown_Attribute changed from 79 to 80
Oct 14 21:08:38 manzano013 smartd[5321]: Device: /dev/hdc, SMART Usage Attribute: 194 Temperature_Celsius changed from 21 to 20
Oct 14 21:38:39 manzano013 smartd[5321]: Device: /dev/hdc, SMART Usage Attribute: 190 Unknown_Attribute changed from 80 to 79
Oct 14 21:38:39 manzano013 smartd[5321]: Device: /dev/hdc, SMART Usage Attribute: 194 Temperature_Celsius changed from 20 to 21
Oct 14 21:38:39 manzano013 smartd[5321]: Device: /dev/hdc, SMART Usage Attribute: 195 Hardware_ECC_Recovered changed from 51 to 49
Oct 14 22:08:38 manzano013 smartd[5321]: Device: /dev/hda, SMART Usage Attribute: 190 Unknown_Attribute changed from 78 to 77
Oct 14 22:08:38 manzano013 smartd[5321]: Device: /dev/hda, SMART Usage Attribute: 194 Temperature_Celsius changed from 22 to 23
Oct 14 22:08:38 manzano013 smartd[5321]: Device: /dev/hdc, SMART Usage Attribute: 190 Unknown_Attribute changed from 79 to 78
Oct 14 22:08:38 manzano013 smartd[5321]: Device: /dev/hdc, SMART Usage Attribute: 194 Temperature_Celsius changed from 21 to 22
Oct 14 22:38:38 manzano013 smartd[5321]: Device: /dev/hda, SMART Usage Attribute: 190 Unknown_Attribute changed from 77 to 78
Oct 14 22:38:38 manzano013 smartd[5321]: Device: /dev/hda, SMART Usage Attribute: 194 Temperature_Celsius changed from 23 to 22
Oct 14 22:38:38 manzano013 smartd[5321]: Device: /dev/hdc, SMART Usage Attribute: 190 Unknown_Attribute changed from 78 to 79
Oct 14 22:38:38 manzano013 smartd[5321]: Device: /dev/hdc, SMART Usage Attribute: 194 Temperature_Celsius changed from 22 to 21
Oct 14 23:08:38 manzano013 smartd[5321]: Device: /dev/hdc, SMART Usage Attribute: 195 Hardware_ECC_Recovered changed from 49 to 50
Oct 14 23:34:32 manzano013 mysqld[15784]: 071014 23:34:32 [Note] /usr/sbin/mysqld: Normal shutdown
Oct 14 23:34:32 manzano013 mysqld[15784]:
Oct 14 23:34:32 manzano013 mysqld[15784]: 071014 23:34:32 InnoDB: Starting shutdown...
Oct 14 23:34:35 manzano013 mysqld[15784]: 071014 23:34:35 InnoDB: Shutdown completed; log sequence number 0 43720
Oct 14 23:34:35 manzano013 mysqld[15784]: 071014 23:34:35 [Note] /usr/sbin/mysqld: Shutdown complete
Oct 14 23:34:35 manzano013 mysqld[15784]:
Oct 14 23:34:35 manzano013 mysqld_safe[12641]: ended
Oct 14 23:34:54 manzano013 mysqld_safe[12715]: started
Oct 14 23:34:54 manzano013 mysqld[12718]: 071014 23:34:54 InnoDB: Started; log sequence number 0 43720
Oct 14 23:34:54 manzano013 mysqld[12718]: 071014 23:34:54 [Note] /usr/sbin/mysqld: ready for connections.
Oct 14 23:34:54 manzano013 mysqld[12718]: Version: '5.0.32-Debian_7etch1' socket: '/var/run/mysqld/mysqld.sock' port: 3306 Debian etch distribution
Oct 14 23:34:55 manzano013 /etc/mysql/debian-start[12751]: Upgrading MySQL tables if necessary.
Oct 14 23:34:55 manzano013 /etc/mysql/debian-start[12759]: Checking for crashed MySQL tables.
Oct 14 23:36:05 manzano013 init: Switching to runlevel: 6
Oct 14 23:36:07 manzano013 mysqld[12718]: 071014 23:36:07 [Note] /usr/sbin/mysqld: Normal shutdown
Oct 14 23:36:07 manzano013 mysqld[12718]:
Oct 14 23:36:07 manzano013 mysqld[12718]: 071014 23:36:07 InnoDB: Starting shutdown...
Oct 14 23:36:10 manzano013 mysqld[12718]: 071014 23:36:10 InnoDB: Shutdown completed; log sequence number 0 43720
Oct 14 23:36:10 manzano013 mysqld[12718]: 071014 23:36:10 [Note] /usr/sbin/mysqld: Shutdown complete
Oct 14 23:36:10 manzano013 mysqld[12718]:
Oct 14 23:36:10 manzano013 mysqld_safe[12900]: ended
Oct 14 23:36:10 manzano013 smartd[5321]: smartd received signal 15: Terminated
Oct 14 23:36:10 manzano013 smartd[5321]: smartd is exiting (exit status 0)
Oct 14 23:36:13 manzano013 named[2096]: shutting down: flushing changes
Oct 14 23:36:13 manzano013 named[2096]: stopping command channel on 127.0.0.1#953
Oct 14 23:36:13 manzano013 named[2096]: stopping command channel on ::1#953
Oct 14 23:36:13 manzano013 named[2096]: no longer listening on ::#53
Oct 14 23:36:13 manzano013 named[2096]: no longer listening on 127.0.0.1#53
Oct 14 23:36:13 manzano013 named[2096]: no longer listening on 80.86.84.23#53
Oct 14 23:36:13 manzano013 named[2096]: exiting
Oct 14 23:36:13 manzano013 lwresd[2110]: shutting down
Oct 14 23:36:13 manzano013 lwresd[2110]: exiting
Oct 14 23:37:03 manzano013 named[2197]: starting BIND 9.3.4 -u bind
Oct 14 23:37:03 manzano013 named[2197]: found 1 CPU, using 1 worker thread
Oct 14 23:37:03 manzano013 named[2197]: loading configuration from '/etc/bind/named.conf'
Oct 14 23:37:04 manzano013 named[2197]: listening on IPv6 interfaces, port 53
Oct 14 23:37:04 manzano013 named[2197]: listening on IPv4 interface lo, 127.0.0.1#53
Oct 14 23:37:04 manzano013 named[2197]: listening on IPv4 interface eth0, 80.86.84.23#53
Oct 14 23:37:04 manzano013 named[2197]: command channel listening on 127.0.0.1#953
Oct 14 23:37:04 manzano013 named[2197]: command channel listening on ::1#953
Oct 14 23:37:04 manzano013 named[2197]: zone 0.in-addr.arpa/IN: loaded serial 1
Oct 14 23:37:04 manzano013 named[2197]: zone 127.in-addr.arpa/IN: loaded serial 1
Oct 14 23:37:04 manzano013 named[2197]: zone 255.in-addr.arpa/IN: loaded serial 1
Oct 14 23:37:04 manzano013 named[2197]: zone localhost/IN: loaded serial 1
Oct 14 23:37:04 manzano013 named[2197]: running
Oct 14 23:37:04 manzano013 lwresd[2211]: starting BIND 9.3.4
Oct 14 23:37:04 manzano013 lwresd[2211]: found 1 CPU, using 1 worker thread
Oct 14 23:37:04 manzano013 lwresd[2211]: loading configuration from '/etc/bind/lwresd.conf'
Oct 14 23:37:04 manzano013 lwresd[2211]: none:0: open: /etc/bind/lwresd.conf: file not found
Oct 14 23:37:04 manzano013 lwresd[2211]: loading configuration from '/etc/resolv.conf'
Oct 14 23:37:04 manzano013 lwresd[2211]: none:0: open: /etc/bind/rndc.key: permission denied
Oct 14 23:37:04 manzano013 lwresd[2211]: couldn't add command channel 127.0.0.1#953: permission denied
Oct 14 23:37:04 manzano013 lwresd[2211]: none:0: open: /etc/bind/rndc.key: permission denied
Oct 14 23:37:04 manzano013 lwresd[2211]: couldn't add command channel ::1#953: permission denied
Oct 14 23:37:04 manzano013 lwresd[2211]: lwres listening on 127.0.0.1#921
Oct 14 23:37:04 manzano013 lwresd[2211]: running
Oct 14 23:37:05 manzano013 ntpdate[2002]: step time server 131.234.137.23 offset -0.747826 sec
Oct 14 23:37:07 manzano013 mysqld_safe[2361]: started
Oct 14 23:37:08 manzano013 mysqld[2364]: 071014 23:37:08 InnoDB: Started; log sequence number 0 43720
Oct 14 23:37:08 manzano013 mysqld[2364]: 071014 23:37:08 [Note] /usr/sbin/mysqld: ready for connections.
Oct 14 23:37:08 manzano013 mysqld[2364]: Version: '5.0.32-Debian_7etch1' socket: '/var/run/mysqld/mysqld.sock' port: 3306 Debian etch distribution
Oct 14 23:37:08 manzano013 /etc/mysql/debian-start[2401]: Upgrading MySQL tables if necessary.
Oct 14 23:37:09 manzano013 /etc/mysql/debian-start[2476]: Checking for crashed MySQL tables.
Oct 14 23:37:11 manzano013 smartd[2514]: smartd version 5.36 [x86_64-unknown-linux-gnu] Copyright (C) 2002-6 Bruce Allen
Oct 14 23:37:11 manzano013 smartd[2514]: Home page is http://smartmontools.sourceforge.net/
Oct 14 23:37:11 manzano013 smartd[2514]: Opened configuration file /etc/smartd.conf
Oct 14 23:37:11 manzano013 smartd[2514]: Drive: DEVICESCAN, implied '-a' Directive on line 22 of file /etc/smartd.conf
Oct 14 23:37:11 manzano013 smartd[2514]: Configuration file /etc/smartd.conf was parsed, found DEVICESCAN, scanning devices
Oct 14 23:37:11 manzano013 smartd[2514]: Problem creating device name scan list
Oct 14 23:37:11 manzano013 smartd[2514]: Device: /dev/hda, opened
Oct 14 23:37:11 manzano013 smartd[2514]: Device: /dev/hda, not found in smartd database.
Oct 14 23:37:11 manzano013 smartd[2514]: Device: /dev/hda, is SMART capable. Adding to "monitor" list.
Oct 14 23:37:11 manzano013 smartd[2514]: Device: /dev/hdc, opened
Oct 14 23:37:11 manzano013 smartd[2514]: Device: /dev/hdc, not found in smartd database.
Oct 14 23:37:11 manzano013 smartd[2514]: Device: /dev/hdc, is SMART capable. Adding to "monitor" list.
Oct 14 23:37:11 manzano013 smartd[2514]: Monitoring 2 ATA and 0 SCSI devices
Oct 14 23:37:12 manzano013 smartd[2516]: smartd has fork()ed into background mode. New PID=2516.
Oct 14 23:37:12 manzano013 smartd[2516]: file /var/run/smartd.pid written containing PID 2516
Oct 14 23:37:12 manzano013 xinetd[2561]: Reading included configuration file: /etc/xinetd.d/chargen [file=/etc/xinetd.conf] [line=14]
Oct 14 23:37:12 manzano013 xinetd[2561]: Reading included configuration file: /etc/xinetd.d/daytime [file=/etc/xinetd.d/daytime] [line=28]
Oct 14 23:37:12 manzano013 xinetd[2561]: Reading included configuration file: /etc/xinetd.d/discard [file=/etc/xinetd.d/discard] [line=26]
Oct 14 23:37:12 manzano013 xinetd[2561]: Reading included configuration file: /etc/xinetd.d/echo [file=/etc/xinetd.d/echo] [line=25]
Oct 14 23:37:12 manzano013 xinetd[2561]: Reading included configuration file: /etc/xinetd.d/time [file=/etc/xinetd.d/time] [line=26]
Oct 14 23:37:12 manzano013 xinetd[2561]: removing chargen
Oct 14 23:37:12 manzano013 xinetd[2561]: removing chargen
Oct 14 23:37:12 manzano013 xinetd[2561]: removing daytime
Oct 14 23:37:12 manzano013 xinetd[2561]: removing daytime
Oct 14 23:37:12 manzano013 xinetd[2561]: removing discard
Oct 14 23:37:12 manzano013 xinetd[2561]: removing discard
Oct 14 23:37:12 manzano013 xinetd[2561]: removing echo
Oct 14 23:37:12 manzano013 xinetd[2561]: removing echo
Oct 14 23:37:12 manzano013 xinetd[2561]: removing time
Oct 14 23:37:12 manzano013 xinetd[2561]: removing time
Oct 14 23:37:12 manzano013 xinetd[2561]: 2561 {init_services} no services. Exiting...
Oct 14 23:53:50 manzano013 vsftpd[2846]: connect from 87.156.107.175 (87.156.107.175)
Oct 14 23:53:53 manzano013 vsftpd[2857]: connect from 87.156.107.175 (87.156.107.175)
Oct 14 23:53:56 manzano013 vsftpd[2858]: connect from 87.156.107.175 (87.156.107.175)
Oct 14 23:54:00 manzano013 vsftpd[2859]: connect from 87.156.107.175 (87.156.107.175)
Oct 14 23:54:03 manzano013 vsftpd[2863]: connect from 87.156.107.175 (87.156.107.175)
Oct 14 23:54:19 manzano013 vsftpd[2864]: connect from 87.156.107.175 (87.156.107.175)
Oct 14 23:54:22 manzano013 vsftpd[2865]: connect from 87.156.107.175 (87.156.107.175)
Oct 14 23:54:25 manzano013 vsftpd[2866]: connect from 87.156.107.175 (87.156.107.175)
Oct 14 23:54:33 manzano013 vsftpd[2867]: connect from 87.156.107.175 (87.156.107.175)
Oct 14 23:54:36 manzano013 vsftpd[2868]: connect from 87.156.107.175 (87.156.107.175)
Oct 14 23:54:40 manzano013 vsftpd[2869]: connect from 87.156.107.175 (87.156.107.175)
Oct 14 23:54:43 manzano013 vsftpd[2870]: connect from 87.156.107.175 (87.156.107.175)
Oct 14 23:54:46 manzano013 vsftpd[2871]: connect from 87.156.107.175 (87.156.107.175)
Oct 14 23:54:49 manzano013 vsftpd[2872]: connect from 87.156.107.175 (87.156.107.175)
Oct 14 23:58:13 manzano013 vsftpd[2911]: connect from 87.156.107.175 (87.156.107.175)
Oct 14 23:58:17 manzano013 vsftpd[2912]: connect from 87.156.107.175 (87.156.107.175)
Oct 15 00:06:42 manzano013 vsftpd[3112]: connect from 87.156.107.175 (87.156.107.175)
Oct 15 00:06:45 manzano013 vsftpd[3113]: connect from 87.156.107.175 (87.156.107.175)
Oct 15 00:07:12 manzano013 smartd[2516]: Device: /dev/hda, SMART Usage Attribute: 190 Unknown_Attribute changed from 76 to 78
Oct 15 00:07:12 manzano013 smartd[2516]: Device: /dev/hda, SMART Usage Attribute: 194 Temperature_Celsius changed from 24 to 22
Oct 15 00:07:12 manzano013 smartd[2516]: Device: /dev/hdc, SMART Usage Attribute: 190 Unknown_Attribute changed from 78 to 79
Oct 15 00:07:12 manzano013 smartd[2516]: Device: /dev/hdc, SMART Usage Attribute: 194 Temperature_Celsius changed from 22 to 21
Oct 15 00:07:12 manzano013 smartd[2516]: Device: /dev/hdc, SMART Usage Attribute: 195 Hardware_ECC_Recovered changed from 49 to 51
Oct 15 00:09:26 manzano013 vsftpd[3149]: connect from 87.156.107.175 (87.156.107.175)
Oct 15 00:09:29 manzano013 vsftpd[3150]: connect from 87.156.107.175 (87.156.107.175)
Oct 15 00:16:46 manzano013 vsftpd[3224]: connect from 87.156.107.175 (87.156.107.175)
Oct 15 00:16:49 manzano013 vsftpd[3225]: connect from 87.156.107.175 (87.156.107.175)
Oct 15 00:16:56 manzano013 vsftpd[3226]: connect from 87.156.107.175 (87.156.107.175)
Oct 15 00:23:06 manzano013 ntpdate[3305]: step time server 80.86.90.28 offset 0.322905 sec
Oct 15 00:45:57 manzano013 vsftpd[3563]: connect from 87.156.107.175 (87.156.107.175)
Oct 15 00:46:00 manzano013 vsftpd[3564]: connect from 87.156.107.175 (87.156.107.175)
Oct 15 00:46:41 manzano013 vsftpd[3571]: connect from 87.156.107.175 (87.156.107.175)
Oct 15 00:46:44 manzano013 vsftpd[3572]: connect from 87.156.107.175 (87.156.107.175)
Oct 15 00:46:57 manzano013 vsftpd[3573]: connect from 87.156.107.175 (87.156.107.175)
Oct 15 00:47:50 manzano013 vsftpd[3577]: connect from 87.156.107.175 (87.156.107.175)
Oct 15 00:47:53 manzano013 vsftpd[3578]: connect from 87.156.107.175 (87.156.107.175)
Oct 15 00:47:56 manzano013 vsftpd[3579]: connect from 87.156.107.175 (87.156.107.175)
Oct 15 00:47:59 manzano013 vsftpd[3580]: connect from 87.156.107.175 (87.156.107.175)
Oct 15 00:48:36 manzano013 vsftpd[3609]: connect from 87.156.107.175 (87.156.107.175)
Oct 15 01:07:12 manzano013 smartd[2516]: Device: /dev/hda, SMART Usage Attribute: 190 Unknown_Attribute changed from 78 to 77
Oct 15 01:07:12 manzano013 smartd[2516]: Device: /dev/hda, SMART Usage Attribute: 194 Temperature_Celsius changed from 22 to 23
Oct 15 01:07:12 manzano013 smartd[2516]: Device: /dev/hdc, SMART Usage Attribute: 190 Unknown_Attribute changed from 79 to 78
Oct 15 01:07:12 manzano013 smartd[2516]: Device: /dev/hdc, SMART Usage Attribute: 194 Temperature_Celsius changed from 21 to 22
Den anderen kann ich nicht posten der ist 90 MB gross :eek:
Hmmm , muss ich jetzt auch passen , mir fällt nix auf ausser deinen Loginversuchen auf dem vsftpd bis 0.48 Uhr.
Allerdings wundert es mich das das überhaupt protokoliert wurde, da der Dienst ja anscheinend nicht läuft!
Poste mal bitte die Ausgabe von netstat -tulpen
Zur xferlog , da würden die letzten 20 Zeilen reichen.
Bezüglich das die Datei bereits 90MB gross ist kannst du Tomek mal mitteilen diese mit in logrotate aufzunehmen.
Active Internet connections (only servers)
Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name
tcp 0 0 127.0.0.1:3306 0.0.0.0:* LISTEN 105 5966 2363/mysqld
tcp 0 0 127.0.0.1:783 0.0.0.0:* LISTEN 0 5780 2242/spamd.pid
tcp 0 0 0.0.0.0:21 0.0.0.0:* LISTEN 0 6133 2414/inetd
tcp 0 0 80.86.84.23:53 0.0.0.0:* LISTEN 103 5702 2197/named
tcp 0 0 127.0.0.1:53 0.0.0.0:* LISTEN 103 5700 2197/named
tcp 0 0 0.0.0.0:25 0.0.0.0:* LISTEN 0 6404 2480/master
tcp 0 0 127.0.0.1:953 0.0.0.0:* LISTEN 103 5705 2197/named
tcp6 0 0 :::993 :::* LISTEN 0 5839 2272/couriertcpd
tcp6 0 0 :::995 :::* LISTEN 0 5877 2296/couriertcpd
tcp6 0 0 :::110 :::* LISTEN 0 5855 2277/couriertcpd
tcp6 0 0 :::143 :::* LISTEN 0 5841 2260/couriertcpd
tcp6 0 0 :::80 :::* LISTEN 0 12113 3592/apache2
tcp6 0 0 :::53 :::* LISTEN 103 5697 2197/named
tcp6 0 0 :::22 :::* LISTEN 0 6633 2526/sshd
tcp6 0 0 ::1:953 :::* LISTEN 103 5706 2197/named
tcp6 0 0 :::443 :::* LISTEN 0 12118 3592/apache2
udp 0 0 0.0.0.0:32768 0.0.0.0:* 103 5703 2197/named
udp 0 0 0.0.0.0:32770 0.0.0.0:* 0 5738 2211/lwresd
udp 0 0 127.0.0.1:921 0.0.0.0:* 0 5740 2211/lwresd
udp 0 0 80.86.84.23:53 0.0.0.0:* 103 5701 2197/named
udp 0 0 127.0.0.1:53 0.0.0.0:* 103 5699 2197/named
udp6 0 0 :::32769 :::* 103 5704 2197/named
udp6 0 0 :::32771 :::* 0 5739 2211/lwresd
udp6 0 0 :::53 :::* 103 5696 2197/named
manzano013:~#
tcp 0 0 0.0.0.0:21 0.0.0.0:* LISTEN 0 6133 2414/inetd
Da scheint aber doch noch etwas zu laufen?!
Führe mal ein /etc/init.d/vsftpd restart aus und schau danach in der /var/log/daemon.log nach, ob dort was vermerkt wird.
Da kommt folgendes nach dem Ausführen:
manzano013:~# /etc/init.d/vsftpd restart
Restarting FTP server: vsftpdNo /usr/sbin/vsftpd found running; none killed.
.
In der daemon.log folgendes:
Oct 15 00:09:26 manzano013 vsftpd[3149]: connect from 87.156.107.175 (87.156.107.175)
Oct 15 00:09:29 manzano013 vsftpd[3150]: connect from 87.156.107.175 (87.156.107.175)
Oct 15 00:16:46 manzano013 vsftpd[3224]: connect from 87.156.107.175 (87.156.107.175)
Oct 15 00:16:49 manzano013 vsftpd[3225]: connect from 87.156.107.175 (87.156.107.175)
Oct 15 00:16:56 manzano013 vsftpd[3226]: connect from 87.156.107.175 (87.156.107.175)
Oct 15 00:23:06 manzano013 ntpdate[3305]: step time server 80.86.90.28 offset 0.322905 sec
Oct 15 00:45:57 manzano013 vsftpd[3563]: connect from 87.156.107.175 (87.156.107.175)
Oct 15 00:46:00 manzano013 vsftpd[3564]: connect from 87.156.107.175 (87.156.107.175)
Oct 15 00:46:41 manzano013 vsftpd[3571]: connect from 87.156.107.175 (87.156.107.175)
Oct 15 00:46:44 manzano013 vsftpd[3572]: connect from 87.156.107.175 (87.156.107.175)
Oct 15 00:46:57 manzano013 vsftpd[3573]: connect from 87.156.107.175 (87.156.107.175)
Oct 15 00:47:50 manzano013 vsftpd[3577]: connect from 87.156.107.175 (87.156.107.175)
Oct 15 00:47:53 manzano013 vsftpd[3578]: connect from 87.156.107.175 (87.156.107.175)
Oct 15 00:47:56 manzano013 vsftpd[3579]: connect from 87.156.107.175 (87.156.107.175)
Oct 15 00:47:59 manzano013 vsftpd[3580]: connect from 87.156.107.175 (87.156.107.175)
Oct 15 00:48:36 manzano013 vsftpd[3609]: connect from 87.156.107.175 (87.156.107.175)
Oct 15 01:07:12 manzano013 smartd[2516]: Device: /dev/hda, SMART Usage Attribute: 190 Unknown_Attribute changed from 78 to 77
Oct 15 01:07:12 manzano013 smartd[2516]: Device: /dev/hda, SMART Usage Attribute: 194 Temperature_Celsius changed from 22 to 23
Oct 15 01:07:12 manzano013 smartd[2516]: Device: /dev/hdc, SMART Usage Attribute: 190 Unknown_Attribute changed from 79 to 78
Oct 15 01:07:12 manzano013 smartd[2516]: Device: /dev/hdc, SMART Usage Attribute: 194 Temperature_Celsius changed from 21 to 22
Oct 15 01:37:13 manzano013 smartd[2516]: Device: /dev/hda, SMART Usage Attribute: 190 Unknown_Attribute changed from 77 to 78
Oct 15 01:37:13 manzano013 smartd[2516]: Device: /dev/hda, SMART Usage Attribute: 194 Temperature_Celsius changed from 23 to 22
Oct 15 01:37:13 manzano013 smartd[2516]: Device: /dev/hdc, SMART Usage Attribute: 190 Unknown_Attribute changed from 78 to 79
Oct 15 01:37:13 manzano013 smartd[2516]: Device: /dev/hdc, SMART Usage Attribute: 194 Temperature_Celsius changed from 22 to 21
Oct 15 01:37:13 manzano013 smartd[2516]: Device: /dev/hdc, SMART Usage Attribute: 195 Hardware_ECC_Recovered changed from 51 to 50
Powered by vBulletin® Version 4.2.5 Copyright ©2024 Adduco Digital e.K. und vBulletin Solutions, Inc. Alle Rechte vorbehalten.