PDA

Archiv verlassen und diese Seite im Standarddesign anzeigen : ASUS x50n



MeHa
10.10.07, 21:55
Hallo,

nach einem Neukauf eines Notebook's /ASUS x50n) wahr ich eigentlich schon recht am verzweiffeln weil es irgendwie aus diversen gründen bisher nicht möglich wahr ein debian oder Bunti-Debian (ubuntu) zu installieren, mal stieg der xserver aus, mal schien es unmöglich ein netzwerk zu konfigurieren (nForce).

wie auch immer habe ich nun als letzten Versuch ein openSUSE10.3 installiert welches zwar einmal mitten in der installation (xserver) ausstieg aber nach dem neustart an der selben stelle beinahe perfekt weiterinstallierte. nun ist suse nicht die traumdistro die ich einzusetzen gedenke aber wenns derzeit die einzigst lauffähige distro ist das notwendige übel.

zur frage,

verbaut ist folgende grafik Geforce 7000m, gibt es derzeit einen halbwegs fertigen Treiber hierfür ? (ich muss mich derzeit mit der auflösung 1024x ... x16bit (vesa)) begnügen.

ebenfalls bin ich noch auf der suche nach dem richtigen wlantreiber (atheros).

thx für die folgenden hinweiße

mfg, MeHa

P.S: Rechtschreib,Satzbau & sonstige Fehler obliegen meiner derzeitigen Verfassung (eine Mischung aus Überarbeitet & Distiverzweiflung ;-) ).

Rain_maker
10.10.07, 22:06
http://wiki.linux-club.de/YaST-Installationsquellen_für_openSUSE

MeHa
10.10.07, 22:46
Danke mein wla funktoniert nun schon einmal wieder aber die grafik...ich seh mir das ganze morgen nach der arbeit nochmals an.

danke dir für denn link zur wiki :-)

Rain_maker
10.10.07, 23:05
Have a look at this:

http://img476.imageshack.us/my.php?image=yastcommunityrepositorimf2.png

Einfach mal in Deinem YaST anklicken und staunen, wie einfach es einem seit neustem das "notwendige Übel" macht.

Greetz,

RM

Kenny@Knoppix
11.10.07, 00:05
:Doh hat der herr rain_maker schon das nagelneue opensuse?

Rain_maker
11.10.07, 00:15
Nur in einer VM als Testgelände (und zum RPM Pakete bauen).

Greetz,

RM

Kenny@Knoppix
11.10.07, 09:26
Danke mein wla funktoniert nun schon einmal wieder aber die grafik...ich seh mir das ganze morgen nach der arbeit nochmals an.

danke dir für denn link zur wiki :-)

http://www.nvidia.de/object/linux_display_ia32_100.14.11_de.html

gehen die normalen nvidia treiber nicht?

MeHa
11.10.07, 09:54
bis jetzt sieht das alles nicht gut aus, per repo kannst das vergessen der kernel header stimmt nicht überein, ich gehe nun nochmal denn weg des modulkompilierens und hoffe das ich nun nicht meine Inst. vernichte.

thx for hint, MeHa

Kenny@Knoppix
11.10.07, 10:12
bis jetzt sieht das alles nicht gut aus, per repo kannst das vergessen der kernel header stimmt nicht überein, ich gehe nun nochmal denn weg des modulkompilierens und hoffe das ich nun nicht meine Inst. vernichte.

thx for hint, MeHa

wie von repo? die nvida treiber sollst du nehmen von der seite oder gehen die nicht=?

Rain_maker
11.10.07, 13:15
bis jetzt sieht das alles nicht gut aus, per repo kannst das vergessen der kernel header stimmt nicht überein,

Bitte?

In dem Repo befinden sich fertige Binärpakete, wieso sollten die von irgendwelchen Kernelheadern abhängen?

Da wird nix kompiliert.



#zypper in nvidia
* Lese installierte Pakete [100%]

S | Repository | Typ | Name | Version | Archite
ktur
--+------------------------------------------+-------+---------------------------+---------------------------+--------
----
| http://download.nvidia.com/opensuse/10.3 | Paket | nvidia-gfx-kmp-bigsmp | 1.0.9639_2.6.22.5_30-0.1 | i586

| http://download.nvidia.com/opensuse/10.3 | Paket | nvidia-gfx-kmp-default | 1.0.9639_2.6.22.5_30-0.1 | i586

| http://download.nvidia.com/opensuse/10.3 | Paket | nvidia-gfxG01-kmp-bigsmp | 100.14.19_2.6.22.5_30-1.1 | i586

| http://download.nvidia.com/opensuse/10.3 | Paket | nvidia-gfxG01-kmp-default | 100.14.19_2.6.22.5_30-1.1 | i586

| http://download.nvidia.com/opensuse/10.3 | Paket | x11-video-nvidia | 1.0.9639-0.1 | i586

| http://download.nvidia.com/opensuse/10.3 | Paket | x11-video-nvidiaG01 | 100.14.19-4 | i586

# zypper in nvidia-gfxG01-kmp-default

* Lese Cache für Repository 'Packman Repository'
* Lese Cache für Repository 'openSUSE-10.3-NON-OSS'
* Lese Cache für Repository 'NVIDIA Repository'
* Lese Cache für Repository 'openSUSE-10.3-OSS'
* Lese Cache für Repository 'openSUSE-10.3-Updates'
* Lese installierte Pakete [100%]


Paket werden installiert (neu):
nvidia-gfxG01-kmp-default x11-video-nvidiaG01

Gesamtgröße des Downloads: 6,9 M. Nach der Operation werden zusätzlich 22,2 M genutzt.
Fortfahren? [ja/nein]:Wo ist da jetzt ne Fehlermeldung wegen Kernel-Headers?

Und solltest Du eine solche bekommen, wieso ztitierst Du sie dann nicht im Wortlaut?

Greetz,

RM

MeHa
11.10.07, 19:21
select instead the packages:

x11-video-nvidia
nvidia-gfx-kmp-"kernel-flavor"

"kernel-flavor" depends on your installed kernel. Check with
"uname -r" for installed default/bigsmp kernel. Use "sax2 -r"
for X.Org configuration.

dieser Kernel ist per repo nicht erreichbar.


Ich habe nun folgendes angewandt


People who aren't afraid of recompiling the nvidia kernel module or
even reinstalling the nvidia driver each time the kernel has been
updated and want or need to use the latest and greatest nvidia driver
can use the following steps 1-3. The others should use the
instructions above using YaST and skip the steps below.

1) Kernel sources must be installed and configured. Usually this means
installing the 'kernel-source', 'make' and 'gcc' packages with YaST2.

2) Use the nvidia installer for 100.14.19.

sh NVIDIA-Linux-x86-100.14.19-pkg1.run -q

3) Configure X.Org with

sax2 -r -m 0=nvidia (0 is a digit, not a letter!)

NOTE: There is no need to try to enable 3D support. It's already
enabled, when the nvidia driver is running.

IMPORTANT: You need to recompile and install the nvidia kernel module
after each kernel update.

sh NVIDIA-Linux-x86-100.14.19-pkg1.run -K

offenbar mit erfolg (nvidia logo beim bootvorgang), jedoch wird mir nach wie vor im Yast eine vesa Grafik suggeriert (trotz nun mit der Auflösung 1280x800x24bit). nun ja 3d oder nicht ? *grübel

Kenny@Knoppix
11.10.07, 22:26
dieser Kernel ist per repo nicht erreichbar.


Ich habe nun folgendes angewandt


offenbar mit erfolg (nvidia logo beim bootvorgang), jedoch wird mir nach wie vor im Yast eine vesa Grafik suggeriert (trotz nun mit der Auflösung 1280x800x24bit). nun ja 3d oder nicht ? *grübel

hab ich dir doch die ganze zeit gesagt, hättest du von nvidia seite downgeloadet und installiert!! da wär sogar ne beschreibung gewesen!

3d beschleunigung kannst du mit dem tool glxgears prüfen

MeHa
12.10.07, 10:37
ok 3d ist aktiv, nun tauchen aber wieder andere probleme auf, mein sound geht nicht (viel mir bisher garnicht auf) verbaut ist ein nForce chipsatz und die rpm's von nvidia sind installiert, leider bietet nvidia offenbar nur die network drivers und sata an, wie schauts aber mit dem nvidia (HD) sound aus ? per yast hatte ich diesen konfiguriert aber suse stellt in immer wieder nach intel driver HD um. (was nicht funktioniert, verwendet wir btw. alsa.

ebenso machts nun der atheros wlan driver nicht mehr, bzw. bluetoth auch nicht mehr, usb wird bisher nur als usb 1x erkannt (ist aber ubs 2.0. ne menge probleme ich weiß vieleicht hat noch wer eine lösung hierfür.

dmesg sagt folgendes...

Linux version 2.6.22.9-0.4-default (geeko@buildhost) (gcc version 4.2.1 (SUSE Linux)) #1 SMP 2007/10/05 21:32:04 UTC
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 0000000037fa8000 (usable)
BIOS-e820: 0000000037fa8000 - 0000000037fb0000 (ACPI NVS)
BIOS-e820: 0000000037fb0000 - 0000000037fbe000 (ACPI data)
BIOS-e820: 0000000037fbe000 - 0000000038000000 (ACPI NVS)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
BIOS-e820: 00000000ffb80000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
895MB LOWMEM available.
found SMP MP-table at 000ff780
Entering add_active_range(0, 0, 229288) 0 entries of 256 used
Zone PFN ranges:
DMA 0 -> 4096
Normal 4096 -> 229288
HighMem 229288 -> 229288
early_node_map[1] active PFN ranges
0: 0 -> 229288
On node 0 totalpages: 229288
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 4064 pages, LIFO batch:0
Normal zone: 1759 pages used for memmap
Normal zone: 223433 pages, LIFO batch:31
HighMem zone: 0 pages used for memmap
DMI present.
Using APIC driver default
ACPI: RSDP 000F9DE0, 0014 (r0 ACPIAM)
ACPI: RSDT 37FB0000, 0048 (r1 _ASUS_ Notebook 20070720 MSFT 97)
ACPI: FACP 37FB0200, 0084 (r2 072007 FACP1616 20070720 MSFT 97)
ACPI: DSDT 37FB0630, 967B (r1 F5N00 F5N00001 1 INTL 20051117)
ACPI: FACS 37FBE000, 0040
ACPI: APIC 37FB0390, 0070 (r1 072007 APIC1616 20070720 MSFT 97)
ACPI: MCFG 37FB0440, 003C (r1 072007 OEMMCFG 20070720 MSFT 97)
ACPI: SLIC 37FB0480, 0176 (r1 _ASUS_ Notebook 20070720 MSFT 97)
ACPI: DBGP 37FB0400, 0034 (r1 072007 DBGP1616 20070720 MSFT 97)
ACPI: BOOT 37FB0600, 0028 (r1 072007 BOOT1616 20070720 MSFT 97)
ACPI: OEMB 37FBE040, 0071 (r1 072007 OEMB1616 20070720 MSFT 97)
ACPI: HPET 37FB9CB0, 0038 (r1 072007 OEMHPET0 20070720 MSFT 97)
ACPI: SSDT 37FB9CF0, 01EA (r1 AMI POWERNOW 1 AMD 1)
ACPI: PM-Timer IO Port: 0x508
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Processor #0 15:8 APIC version 16
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
Processor #1 15:8 APIC version 16
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
ACPI: IRQ14 used by override.
ACPI: IRQ15 used by override.
Enabling APIC mode: Flat. Using 1 I/O APICs
ACPI: HPET id: 0x10de8201 base: 0xfed00000
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 40000000 (gap: 38000000:c6c00000)
Built 1 zonelists. Total pages: 227497
Kernel command line: root=/dev/disk/by-id/scsi-SATA_Hitachi_HTS5416_SB2E41H7H0VSVE-part6 vga=0x317 resume=/dev/sda5 splash=silent
bootsplash: silent mode.
mapped APIC to ffffd000 (fee00000)
mapped IOAPIC to ffffc000 (fec00000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 16384 bytes)
Detected 797.148 MHz processor.
spurious 8259A interrupt: IRQ7.
Console: colour dummy device 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 901096k/917152k available (1824k kernel code, 15440k reserved, 761k data, 228k init, 0k highmem)
virtual kernel memory layout:
fixmap : 0xffdf4000 - 0xfffff000 (2092 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
lowmem : 0xc0000000 - 0xf7fa8000 ( 895 MB)
.init : 0xc038e000 - 0xc03c7000 ( 228 kB)
.data : 0xc02c832b - 0xc0386964 ( 761 kB)
.text : 0xc0100000 - 0xc02c832b (1824 kB)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31
hpet0: 3 32-bit timers, 25000000 Hz
Calibrating delay using timer specific routine.. 1607.27 BogoMIPS (lpj=3214548)
Security Framework v1.0.0 initialized
Mount-cache hash table entries: 512
CPU: After generic identify, caps: 178bfbff ebd3fbff 00000000 00000000 00002001 00000000 0000011f
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 256K (64 bytes/line)
CPU 0(2) -> Core 0
CPU: After all inits, caps: 178bfbff ebd3fbff 00000000 00000410 00002001 00000000 0000011f
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Compat vDSO mapped to ffffe000.
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
Unpacking initramfs... done
Freeing initrd memory: 4035k freed
ACPI: Core revision 20070126
Parsing all Control Methods:
Table [DSDT](id 0001) - 1317 Objects with 77 Devices 499 Methods 31 Regions
Parsing all Control Methods:
Table [SSDT](id 0002) - 10 Objects with 0 Devices 2 Methods 0 Regions
tbxface-0587 [00] tb_load_namespace : ACPI Tables successfully acquired
evxfevnt-0091 [00] enable : Transition to ACPI mode successful
CPU0: AMD Athlon(tm) 64 X2 Dual-Core Processor TK-53 stepping 01
SMP alternatives: switching to SMP code
Booting processor 1/1 eip 3000
Initializing CPU#1
Calibrating delay using timer specific routine.. 1594.24 BogoMIPS (lpj=3188493)
CPU: After generic identify, caps: 178bfbff ebd3fbff 00000000 00000000 00002001 00000000 0000011f
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 256K (64 bytes/line)
CPU 1(2) -> Core 1
CPU: After all inits, caps: 178bfbff ebd3fbff 00000000 00000410 00002001 00000000 0000011f
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#1.
CPU1: AMD Athlon(tm) 64 X2 Dual-Core Processor TK-53 stepping 01
Total of 2 processors activated (3201.52 BogoMIPS).
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
Brought up 2 CPUs
migration_cost=4000
Booting paravirtualized kernel on bare hardware
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: BIOS Bug: MCFG area at e0000000 is not E820-reserved
PCI: Not using MMCONFIG.
PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=5
PCI: Using configuration type 1
Setting up standard PCI resources
evgpeblk-0956 [00] ev_create_gpe_block : GPE 00 to 1F [_GPE] 4 regs on int 0x9
evgpeblk-0956 [00] ev_create_gpe_block : GPE 20 to 5F [_GPE] 8 regs on int 0x9
evgpeblk-1052 [00] ev_initialize_gpe_bloc: Found 9 Wake, Enabled 1 Runtime GPEs in this block
evgpeblk-1052 [00] ev_initialize_gpe_bloc: Found 0 Wake, Enabled 0 Runtime GPEs in this block
Completing Region/Field/Buffer/Package initialization:................................... .................................................. ......................................
Initialized 30/31 Regions 16/16 Fields 50/50 Buffers 27/29 Packages (1336 nodes)
Initializing Device/Processor/Thermal objects by executing _INI methods:...
Executed 3 _INI methods requiring 0 _STA executions (examined 84 objects)
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
Error attaching device data
Error attaching device data
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
PCI: Transparent bridge - 0000:00:08.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P3._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LNEA] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LNEB] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LNEC] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LNED] (IRQs 16 17 18 19) *7
ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *10
ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *11
ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *11
ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) *10
ACPI: PCI Interrupt Link [SGRU] (IRQs 20 21 22 23) *10
ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *11
ACPI: PCI Interrupt Link [LPMU] (IRQs 20 21 22 23) *7
ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *5
ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [UB11] (IRQs 20 21 22 23) *7
ACPI: PCI Interrupt Link [UB12] (IRQs 20 21 22 23) *7
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 14 devices
ACPI: ACPI bus type pnp unregistered
PnPBIOS: Disabled by ACPI PNP
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
ACPI: RTC can wake from S4
pnp: 00:06: iomem range 0x0-0x0 could not be reserved
pnp: 00:06: iomem range 0xfefe0000-0xfefe01ff has been reserved
pnp: 00:06: iomem range 0xfefe1000-0xfefe1fff has been reserved
pnp: 00:06: iomem range 0xfee01000-0xfeefffff could not be reserved
pnp: 00:09: ioport range 0x250-0x253 has been reserved
pnp: 00:09: ioport range 0x256-0x25f has been reserved
pnp: 00:09: iomem range 0xfec00000-0xfec00fff could not be reserved
pnp: 00:09: iomem range 0xfee00000-0xfee00fff could not be reserved
pnp: 00:0b: ioport range 0x5000-0x507f has been reserved
pnp: 00:0b: ioport range 0x5080-0x50ff has been reserved
pnp: 00:0c: iomem range 0xe0000000-0xefffffff has been reserved
pnp: 00:0d: iomem range 0x0-0x9ffff could not be reserved
pnp: 00:0d: iomem range 0xc0000-0xcffff could not be reserved
pnp: 00:0d: iomem range 0xe0000-0xfffff could not be reserved
pnp: 00:0d: iomem range 0x100000-0x3fffffff could not be reserved
Time: hpet clocksource has been installed.
PCI: Bridge: 0000:00:08.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:00:0c.0
IO window: e000-efff
MEM window: fd800000-feafffff
PREFETCH window: f8000000-faffffff
PCI: Bridge: 0000:00:0d.0
IO window: disabled.
MEM window: feb00000-febfffff
PREFETCH window: disabled.
PCI: Setting latency timer of device 0000:00:08.0 to 64
PCI: Setting latency timer of device 0000:00:0c.0 to 64
PCI: Setting latency timer of device 0000:00:0d.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1572864 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
Simple Boot Flag at 0x52 set to 0x1
Machine check exception polling timer started.
audit: initializing netlink socket (disabled)
audit(1192181612.928:1): initialized
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
Boot video device is 0000:00:12.0
PCI: Setting latency timer of device 0000:00:0c.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:0c.0:pcie00]
PCI: Setting latency timer of device 0000:00:0d.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:0d.0:pcie00]
vesafb: framebuffer at 0xd0000000, mapped to 0xf8880000, using 6144k, total 131072k
vesafb: mode is 1024x768x16, linelength=2048, pages=1
vesafb: protected mode interface info at c000:d750
vesafb: pmi: set display start = c00cd786, set palette = c00cd7f0
vesafb: pmi: ports = b4c3 b503 ba03 c003 c103 c403 c503 c603 c703 c803 c903 cc03 ce03 cf03 d003 d103 d203 d303 d403 d503 da03 ff03
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
bootsplash 3.1.6-2004/03/31: looking for picture...
bootsplash: silentjpeg size 78436 bytes
bootsplash: ...found (1024x768, 28133 bytes, v3).
Console: switching to colour frame buffer device 124x44
fb0: VESA VGA frame buffer device
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Real Time Clock Driver v1.12ac
hpet_resources: 0xfed00000 is busy
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
floppy0: no floppy controllers found
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
i8042.c: Detected active multiplexing controller, rev 1.1.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
input: PC Speaker as /class/input/input0
NET: Registered protocol family 1
Using IPI No-Shortcut mode
Freeing unused kernel memory: 228k freed
ACPI: Thermal Zone [THRM] (41 C)
SCSI subsystem initialized
libata version 3.00 loaded.
pata_amd 0000:00:06.0: version 0.3.8
PCI: Setting latency timer of device 0000:00:06.0 to 64
scsi0 : pata_amd
scsi1 : pata_amd
ata1: PATA max UDMA/133 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x0001ffa0 irq 14
ata2: PATA max UDMA/133 cmd 0x00010170 ctl 0x00010376 bmdma 0x0001ffa8 irq 15
ata1.00: ATAPI: MATSHITADVD-RAM UJ-850S, 1.21, max UDMA/33
ata1.00: configured for UDMA/33
ata2: port disabled. ignoring.
scsi 0:0:0:0: CD-ROM MATSHITA DVD-RAM UJ-850S 1.21 PQ: 0 ANSI: 5
ahci 0000:00:09.0: version 3.0
ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 23
ACPI: PCI Interrupt 0000:00:09.0[A] -> Link [LSA0] -> GSI 23 (level, low) -> IRQ 16
Synaptics Touchpad, model: 1, fw: 6.1, id: 0xa3a0b3, caps: 0xa04713/0x10008
input: SynPS/2 Synaptics TouchPad as /class/input/input1
input: AT Translated Set 2 keyboard as /class/input/input2
input: AT Translated Set 2 keyboard as /class/input/input3
ahci 0000:00:09.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl IDE mode
ahci 0000:00:09.0: flags: 64bit sntf led clo pmp pio
PCI: Setting latency timer of device 0000:00:09.0 to 64
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata3: SATA max UDMA/133 cmd 0xf882c100 ctl 0x00000000 bmdma 0x00000000 irq 16
ata4: SATA max UDMA/133 cmd 0xf882c180 ctl 0x00000000 bmdma 0x00000000 irq 16
ata5: SATA max UDMA/133 cmd 0xf882c200 ctl 0x00000000 bmdma 0x00000000 irq 16
ata6: SATA max UDMA/133 cmd 0xf882c280 ctl 0x00000000 bmdma 0x00000000 irq 16
ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata3.00: ATA-7: Hitachi HTS541612J9SA00, SBDOC70P, max UDMA/100
ata3.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata3.00: configured for UDMA/100
ata4: SATA link down (SStatus 0 SControl 300)
ata5: SATA link down (SStatus 0 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
scsi 2:0:0:0: Direct-Access ATA Hitachi HTS54161 SBDO PQ: 0 ANSI: 5
BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 22
ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [LUB2] -> GSI 22 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:00:02.1 to 64
ehci_hcd 0000:00:02.1: EHCI Host Controller
sd 2:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 2:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda:<6>ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:02.1: debug port 1
PCI: cache line size of 64 is not supported by device 0000:00:02.1
ehci_hcd 0000:00:02.1: irq 17, io mem 0xfd77ec00
ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: new device found, idVendor=0000, idProduct=0000
usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.22.9-0.4-default ehci_hcd
usb usb1: SerialNumber: 0000:00:02.1
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 5 ports detected
ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
ACPI: PCI Interrupt Link [UB12] enabled at IRQ 21
ACPI: PCI Interrupt 0000:00:04.1[B] -> Link [UB12] -> GSI 21 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:04.1 to 64
ehci_hcd 0000:00:04.1: EHCI Host Controller
ehci_hcd 0000:00:04.1: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:04.1: debug port 1
PCI: cache line size of 64 is not supported by device 0000:00:04.1
ehci_hcd 0000:00:04.1: irq 18, io mem 0xfd77e800
ehci_hcd 0000:00:04.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb2: new device found, idVendor=0000, idProduct=0000
usb usb2: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.22.9-0.4-default ehci_hcd
usb usb2: SerialNumber: 0000:00:04.1
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 5 ports detected
sda1 sda2 < sda5 sda6 sda7 >
ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 20
ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LUB0] -> GSI 20 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:02.0 to 64
ohci_hcd 0000:00:02.0: OHCI Host Controller
ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 3
ohci_hcd 0000:00:02.0: irq 19, io mem 0xfd77f000
sd 2:0:0:0: [sda] Attached SCSI disk
usb usb3: new device found, idVendor=0000, idProduct=0000
usb usb3: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: OHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.22.9-0.4-default ohci_hcd
usb usb3: SerialNumber: 0000:00:02.0
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 5 ports detected
usb 1-3: new high speed USB device using ehci_hcd and address 2
ACPI: PCI Interrupt Link [UB11] enabled at IRQ 23
ACPI: PCI Interrupt 0000:00:04.0[A] -> Link [UB11] -> GSI 23 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:04.0 to 64
ohci_hcd 0000:00:04.0: OHCI Host Controller
ohci_hcd 0000:00:04.0: new USB bus registered, assigned bus number 4
ohci_hcd 0000:00:04.0: irq 16, io mem 0xfd77d000
usb 1-3: new device found, idVendor=0bda, idProduct=0116
usb 1-3: new device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-3: Product: USB2.0-CRW
usb 1-3: Manufacturer: Generic
usb 1-3: SerialNumber: 20021111153705700
usb usb4: new device found, idVendor=0000, idProduct=0000
usb usb4: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: OHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.22.9-0.4-default ohci_hcd
usb usb4: SerialNumber: 0000:00:04.0
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 5 ports detected
usb 1-3: configuration #1 chosen from 1 choice
swsusp: Basic memory bitmaps created
swsusp: Basic memory bitmaps freed
Attempting manual resume
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda6, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
scsi 0:0:0:0: Attached scsi generic sg0 type 5
sd 2:0:0:0: Attached scsi generic sg1 type 0
sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 0:0:0:0: Attached scsi CD-ROM sr0
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
rtc_cmos 00:08: rtc core: registered rtc_cmos as rtc0
rtc_cmos: probe of 00:08 failed with error -16
Initializing USB Mass Storage driver...
scsi6 : SCSI emulation for USB Mass Storage devices
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usb-storage: device found at 2
usb-storage: waiting for device to settle before scanning
forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.60.
ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 22
ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LMAC] -> GSI 22 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:00:0a.0 to 64
forcedeth: using HIGHDMA
Linux agpgart interface v0.102 (c) Dave Jones
input: Power Button (FF) as /class/input/input4
ACPI: Power Button (FF) [PWRF]
input: Power Button (CM) as /class/input/input5
ACPI: Power Button (CM) [PWRB]
input: Sleep Button (CM) as /class/input/input6
ACPI: Sleep Button (CM) [SLPB]
input: Lid Switch as /class/input/input7
ACPI: Lid Switch [LID]
ACPI: AC Adapter [AC0] (off-line)
nvidia: module license 'NVIDIA' taints kernel.
eth0: forcedeth.c: subsystem: 01043:1697 bound to 0000:00:0a.0
ACPI: PCI Interrupt Link [SGRU] enabled at IRQ 21
ACPI: PCI Interrupt 0000:00:12.0[A] -> Link [SGRU] -> GSI 21 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:12.0 to 64
asus-laptop: Asus Laptop Support version 0.42
NVRM: loading NVIDIA UNIX x86 Kernel Module 100.14.11 Wed Jun 13 18:21:22 PDT 2007
asus-laptop: F5N model detected
ACPI: Battery Slot [BAT0] (battery present)
ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 20
ACPI: PCI Interrupt 0000:00:07.0[A] -> Link [LAZA] -> GSI 20 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:07.0 to 64
scsi 6:0:0:0: Direct-Access Generic- xD/SDMMC/MS/Pro 1.00 PQ: 0 ANSI: 0 CCS
sd 6:0:0:0: [sdb] Attached SCSI removable disk
sd 6:0:0:0: Attached scsi generic sg2 type 0
usb-storage: device scan complete
Adding 1542168k swap on /dev/sda5. Priority:-1 extents:1 across:1542168k
device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
loop: module loaded
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda7, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
fuse init (API version 7.8)
AppArmor: AppArmor initialized
audit(1192181630.429:2): type=1505 info="AppArmor initialized" pid=2040
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
Mobile IPv6
ip6_tables: (C) 2000-2006 Netfilter Core Team
powernow-k8: Found 2 AMD Athlon(tm) 64 X2 Dual-Core Processor TK-53 processors (version 2.00.00)
powernow-k8: 0 : fid 0x9 (1700 MHz), vid 0x13
powernow-k8: 1 : fid 0x8 (1600 MHz), vid 0x14
powernow-k8: 2 : fid 0x0 (800 MHz), vid 0x1a
ip_tables: (C) 2000-2006 Netfilter Core Team
Netfilter messages via NETLINK v0.30.
nf_conntrack version 0.5.0 (7165 buckets, 57320 max)
Clocksource tsc unstable (delta = 137243297 ns)
NET: Registered protocol family 17
audit(1192174454.151:3): audit_backlog_limit=320 old=64 by auid=4294967295 res=1
audit(1192174454.151:4): audit_pid=3065 old=0 by auid=4294967295
input: /usr/sbin/acpi-keys as /class/input/input8
eth0: no IPv6 routers present


thx for help, MeHa

Kenny@Knoppix
12.10.07, 13:13
gut das ich ein thinkpad hab

nvidia sound dürfte der automatisch erkennen, poste mal nen paar ausgaben

poste mal die ausgabe von lspci und iwconfig

MeHa
12.10.07, 19:30
lspci

linux-kd85:~ # lspci
00:00.0 RAM memory: nVidia Corporation Unknown device 0547 (rev a2)
00:01.0 ISA bridge: nVidia Corporation Unknown device 0548 (rev a2)
00:01.1 SMBus: nVidia Corporation Unknown device 0542 (rev a2)
00:01.2 RAM memory: nVidia Corporation Unknown device 0541 (rev a2)
00:01.3 Co-processor: nVidia Corporation Unknown device 0543 (rev a2)
00:02.0 USB Controller: nVidia Corporation MCP67 OHCI USB 1.1 Controller (rev a2)
00:02.1 USB Controller: nVidia Corporation MCP67 EHCI USB 2.0 Controller (rev a2)
00:04.0 USB Controller: nVidia Corporation MCP67 OHCI USB 1.1 Controller (rev a2)
00:04.1 USB Controller: nVidia Corporation MCP67 EHCI USB 2.0 Controller (rev a2)
00:06.0 IDE interface: nVidia Corporation MCP67 IDE Controller (rev a1)
00:07.0 Audio device: nVidia Corporation MCP67 High Definition Audio (rev a1)
00:08.0 PCI bridge: nVidia Corporation Unknown device 0561 (rev a2)
00:09.0 IDE interface: nVidia Corporation Unknown device 0550 (rev a2)
00:0a.0 Ethernet controller: nVidia Corporation Unknown device 054c (rev a2)
00:0c.0 PCI bridge: nVidia Corporation Unknown device 0563 (rev a2)
00:0d.0 PCI bridge: nVidia Corporation Unknown device 0563 (rev a2)
00:12.0 VGA compatible controller: nVidia Corporation GeForce 7000M (rev a2) (rev a2)
00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
05:00.0 Ethernet controller: Atheros Communications, Inc. AR5006EG 802.11 b/g Wireless PCI Express Adapter (rev 01)


iwconfig


linux-kd85:~ # iwconfig
lo no wireless extensions.

eth0 no wireless extensions.

MeHa
14.10.07, 11:42
auch wenn ich es ungern mache => *PUSH* :eek:

stracki123
10.12.07, 17:16
Hallo zusammen ich klinke mich mal hier ein, da ich das selbige Notebook habe.
Ich habe versucht das madwifi zu installieren.
Habe die rpm`s installiert
madwifi == 0.9.3.99-36
madwifi-devel == 0.9.3.99-36
madwifi-kmp-default==0.9.3.3_2.6.22.9_0.4-0.1
Kernel==2.6.22.13-0.3-default
und danach modprobe ath_pci
Aber Karte nix da???


Guckst Du hier :confused:
noname:~ # lsmod | grep ath
ath_pci 111664 0
wlan 218648 1 ath_pci
ath_hal 234864 1 ath_pci
noname:~ # iwconfig
lo no wireless extensions.

eth0 no wireless extensions.

noname:~ #

stefan.becker
10.12.07, 19:15
Das liegt ganz klar an _der_ Distribution!

Rain_maker
10.12.07, 19:55
Sollte ein
/sbin/lspci -nals PCI-ID

168c:001c

für die Karte auswerfen, dann ist das hier der passende Lesestoff:

http://www.linux-club.de/ftopic88683.html

http://www.linuxforen.de/forums/showthread.php?t=242853

stracki123
10.12.07, 21:02
Hallo,
bei MeHa läuftes doch, wie am Anfang des Beitrags beschrieben.
Liegt es möglicherweise am Kernel???
Ich habe alles neu gemacht,einschließlich der (Kernel)-Updates.

Gruß

Jürgen

Rain_maker
10.12.07, 21:29
Hallo,
bei MeHa läuftes doch, wie am Anfang des Beitrags beschrieben.

Den Konjunktiv in meinem Satz ("Sollte") hast Du bemerkt?


Liegt es möglicherweise am Kernel???

Bin ich Hellseher?

Wie soll man ohne jegliche Infos sinnvolle Ratschläge geben?

So wird das nix, liefere verwertbare Infos, wie sie hier in diesem Thread und in praktisch jedem Thread zum Thema WLAN ständig abgefragt/gepostet werden, dann kann man mehr dazu sagen.

stracki123
10.12.07, 21:40
Also Kernel war 2.6.22.13-0.3-default

dann das:

noname:~ # iwconfig
lo no wireless extensions.

eth0 no wireless extensions.

noname:~ # lsmod | grep ath
ath_pci 111664 0
wlan 218648 1 ath_pci
ath_hal 234864 1 ath_pci
noname:~ #
noname:~ # iwconfig
lo no wireless extensions.

eth0 no wireless extensions.

und die Hartware-erkennung gibt das aus s.grafik

stracki123
10.12.07, 21:43
Sollte ein
/sbin/lspci -nals PCI-ID

168c:001c

für die Karte auswerfen, dann ist das hier der passende Lesestoff:

http://www.linux-club.de/ftopic88683.html

http://www.linuxforen.de/forums/showthread.php?t=242853

Sorry habe ich übersehen


PCI-ID ist 168c:001c

ich kann nur leider nichts mi den Links anfangen

Rain_maker
10.12.07, 21:45
ich kann nur leider nichts mi den Links anfangen

Tja, das ist Pech.

Und hättest Du diese Ausgaben gleich geliefert, dann hätte ich mir die letzten Postings auch sparen können.

Entweder bekommst Du die Karte so wie in den Links beschrieben mit ndiswrapper zum Laufen oder es wird eben nichts mit WLAN.

stracki123
10.12.07, 22:02
ok ist einen Versuch wert.
Kennst du eine andere Distri mit der es (besser)funktionieren könnte.
Ich hab das schleppi noch nicht so lange, bin also noch sehr flexibel und auf der anderen Seite habe ich Vista :eek::mad:

gruß

Jürgen

Rain_maker
10.12.07, 22:12
Kennst du eine andere Distri mit der es (besser)funktionieren könnte.

Ja, WindowsXP/Vista.

Zum jetzigen Zeitpunkt wirst Du mit jeder Linuxdistribution dieses Problem haben, weil die aktuellen Madwifi-Treiber diese Karte noch nicht unterstützen.

Die Gründe hierfür kannst Du erfahren, wenn Du die verlinkten Threads (und dort die weiter verlinkten Artikel) liest.

stracki123
10.12.07, 22:18
Ja, WindowsXP/Vista.

Zum jetzigen Zeitpunkt wirst Du mit jeder Linuxdistribution dieses Problem haben, weil die aktuellen Madwifi-Treiber diese Karte noch nicht unterstützen.

Die Gründe hierfür kannst Du erfahren, wenn Du die verlinkten Threads liest.

wie ist es denn mit einer andern wlan-karte aus.
So teuer sind die nicht:D,auf Vista hab ich keinen Bock und ein xp kaufen ist nicht.

Welche laufen ganz sicher ohne "Handarbeit"

Gruß

Jürgen

Rain_maker
10.12.07, 22:44
Bemühe die Forensuche, dazu gibt es massenweise Threads.

Rain_maker
12.12.07, 02:49
Für Experimentierfreudige:

http://www.pc-forum24.de/suse-treiber/7830-experimentelle-madwifi-pakete-fuer-karten-mit-ar2425-ar5007eg-chipsatz-nur-32-bit.html

Das Ganze funktioniert -wenn überhaupt- NUR bei 32-Bit Systemen, ich übernehme keinerlei Haftung auf Funktionstüchtigkeit der Pakete.

Um Rückmeldung wird gebeten.

Greetz,

RM