WLAN Probleme ASUS A6KM Notebook

[crow_master]

Hallo zusammen,


Folgende Problematik stellt sich mir.

Ich habe ein ASUS A6KM Notebook, 100 Gigabyte HD, 1 GB RAM, WLAN Adapter on Board usw., habe gestern SUSE 10.2 installiert.

Beim Installationsvorgang wurde u.A. die WLAN-Netzwerkarte erkannt und ich sollte diese konfigurieren, habe ich auch getan. Ich habe einen Router und vergebe die IP-Adressen jedem Rechner manuell. Bei den Windows PCs klappt soweit auch alles gut, da habe ich keine Probleme (zumindest nicht mit dem WLAN).

Ich habe beide konfiguriert aber die WLAN Sache läuft nicht, nach ca. 6 Std. in diesem Forum und bei Google gebe ich auf, ich habe die IPs, etc alles 20 mal geprüft kein WLAN, er scheint mir auch das Netzt nicht zu finden, da er unter iwconfig zum Access Point meint invalid, ich habe die Faxen dicke, kann mir vielleicht bitte jemand helfen?

Er findet überhaupt kein WLan-Netzwerk:mad:

Die Ethernetkarte (eth1) läuft hervorragend, Internet etc alles bestens, nur WLAN klappt nicht.

[zyrusthc]

Was für ein WLAN-Adapter?
Poste die Ausgabe von lspci und dmesg und verwende für die Ausgaben die Code-Tags des Forums!

Greeez Oli

[crow_master]

Hallo Oli,


in dem Notebook ist ein
Broadcom AirForce One BCM4318 -WiFi 802.11a/b/g


verwende für die Ausgaben die Code-Tags des Forums!

Was meinst Du damit :confused:
Sorry, aber bin ein Newbie ;)

[zyrusthc]

in dem Notebook ist ein
Broadcom AirForce One BCM4318 -WiFi 802.11a/b/g
Ich habe doch die Ausgabe von dmesg und lspci noch verlangt!?

Was meinst Du damit :confused:
Die Tags des Forums , näheres dazu hier (http://www.linuxforen.de/forums/misc.php?do=bbcode) und hier (http://www.linuxforen.de/forums/showthread.php?t=229647)!


Greeez Oli

[crow_master]

Beetle:~ # lspci
00:00.0 Host bridge: Silicon Integrated Systems [SiS] Unknown device 0756 (rev 02)
00:01.0 PCI bridge: Silicon Integrated Systems [SiS] PCI-to-PCI bridge
00:02.0 ISA bridge: Silicon Integrated Systems [SiS] SiS964 [MuTIOL Media IO] (rev 36)
00:02.5 IDE interface: Silicon Integrated Systems [SiS] 5513 [IDE] (rev 01)
00:02.6 Modem: Silicon Integrated Systems [SiS] AC'97 Modem Controller (rev a0)
00:02.7 Multimedia audio controller: Silicon Integrated Systems [SiS] AC'97 Sound Controller (rev a0)
00:03.0 USB Controller: Silicon Integrated Systems [SiS] USB 1.0 Controller (rev 0f)
00:03.1 USB Controller: Silicon Integrated Systems [SiS] USB 1.0 Controller (rev 0f)
00:03.2 USB Controller: Silicon Integrated Systems [SiS] USB 1.0 Controller (rev 0f)
00:03.3 USB Controller: Silicon Integrated Systems [SiS] USB 2.0 Controller
00:09.0 Network controller: Broadcom Corporation BCM4318 [AirForce One 54g] 802.11g Wireless LAN Controller (rev 02)
00:0a.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev b3)
00:0a.1 FireWire (IEEE 1394): Ricoh Co Ltd R5C552 IEEE 1394 Controller (rev 08)
00:0a.2 Generic system peripheral [Class 0805]: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 17)
00:0a.3 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 08)
00:0b.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8169 Gigabit Ethernet (rev 10)
00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
01:00.0 VGA compatible controller: nVidia Corporation Quadro NVS 110M / GeForce Go 7300 (rev a1)


und hier



Linux version 2.6.18.2-34-default (geeko@buildhost) (gcc version 4.1.2 20061115 (prerelease) (SUSE Linux)) #1 SMP Mon Nov 27 11:46:27 UTC 2006
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000003ffd0000 (usable)
BIOS-e820: 000000003ffd0000 - 000000003ffde000 (ACPI data)
BIOS-e820: 000000003ffde000 - 0000000040000000 (ACPI NVS)
BIOS-e820: 00000000ff780000 - 0000000100000000 (reserved)
127MB HIGHMEM available.
896MB LOWMEM available.
On node 0 totalpages: 262096
DMA zone: 4096 pages, LIFO batch:0
Normal zone: 225280 pages, LIFO batch:31
HighMem zone: 32720 pages, LIFO batch:7
DMI 2.3 present.
Using APIC driver default
IO/L-APIC allowed because system is MP or new enough
ACPI: RSDP (v000 ACPIAM ) @ 0x000f7870
ACPI: RSDT (v001 A M I OEMRSDT 0x05000608 MSFT 0x00000097) @ 0x3ffd0000
ACPI: FADT (v002 A M I OEMFACP 0x05000608 MSFT 0x00000097) @ 0x3ffd0200
ACPI: MADT (v001 A M I OEMAPIC 0x05000608 MSFT 0x00000097) @ 0x3ffd0390
ACPI: MCFG (v001 A M I OEMMCFG 0x05000608 MSFT 0x00000097) @ 0x3ffd03f0
ACPI: OEMB (v001 A M I AMI_OEM 0x05000608 MSFT 0x00000097) @ 0x3ffde040
ACPI: DSDT (v001 1ABZX 1ABZX001 0x00000001 INTL 0x02002026) @ 0x00000000
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Processor #0 15:4 APIC version 16
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, version 20, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode: Flat. Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 50000000 (gap: 40000000:bf780000)
Detected 800.081 MHz processor.
Built 1 zonelists. Total pages: 262096
Kernel command line: root=/dev/hda6 vga=0x317 resume=/dev/hda3 splash=silent
bootsplash: silent mode.
mapped APIC to ffffd000 (fee00000)
mapped IOAPIC to ffffc000 (fec00000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 16384 bytes)
Console: colour dummy device 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 1032148k/1048384k available (1697k kernel code, 15472k reserved, 968k data, 196k init, 130880k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 1601.33 BogoMIPS (lpj=3202665)
Security Framework v1.0.0 initialized
Mount-cache hash table entries: 512
CPU: After generic identify, caps: 078bfbff e3d3fbff 00000000 00000000 00000001 00000000 00000001
CPU: After vendor identify, caps: 078bfbff e3d3fbff 00000000 00000000 00000001 00000000 00000001
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
CPU: After all inits, caps: 078bfbff e3d3fbff 00000000 00000410 00000001 00000000 00000001
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Compat vDSO mapped to ffffe000.
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
Freeing SMP alternatives: 16k freed
checking if image is initramfs... it is
Freeing initrd memory: 3149k freed
ACPI: Core revision 20060707
CPU0: AMD Turion(tm) 64 Mobile Technology MT-34 stepping 02
Total of 1 processors activated (1601.33 BogoMIPS).
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
Brought up 1 CPUs
migration_cost=0
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: BIOS Bug: MCFG area at e0000000 is not E820-reserved
PCI: Not using MMCONFIG.
PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=1
PCI: Using configuration type 1
Setting up standard PCI resources
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
Boot video device is 0000:01:00.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
ACPI: Embedded Controller [EC0] (gpe 25) interrupt mode.
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 *4 5 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 7 10 11 12 14 15)
ACPI: Power Resource [GFAN] (off)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 12 devices
PnPBIOS: Disabled by ACPI PNP
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
pnp: 00:07: ioport range 0xa00-0xa0f has been reserved
PCI: Bridge: 0000:00:01.0
IO window: disabled.
MEM window: fa200000-fe2fffff
PREFETCH window: bde00000-ddefffff
PCI: Bus 2, cardbus bridge: 0000:00:0a.0
IO window: 00001000-000010ff
IO window: 00001400-000014ff
PREFETCH window: 50000000-51ffffff
MEM window: 52000000-53ffffff
PCI: Setting latency timer of device 0000:00:01.0 to 64
ACPI: PCI Interrupt 0000:00:0a.0[A] -> GSI 17 (level, low) -> IRQ 169
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
Machine check exception polling timer started.
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
apm: overridden by ACPI.
audit: initializing netlink socket (disabled)
audit(1189689667.080:1): initialized
highmem bounce pool size: 64 pages
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Initializing Cryptographic API
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
PCI: Setting latency timer of device 0000:00:01.0 to 64
pcie_portdrv_probe->Dev[0004:1039] has invalid IRQ. Check vendor BIOS
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:01.0:pcie00]
vesafb: framebuffer at 0xc0000000, mapped to 0xf8880000, using 6144k, total 65536k
vesafb: mode is 1024x768x16, linelength=2048, pages=1
vesafb: protected mode interface info at c000:d5d0
vesafb: pmi: set display start = c00cd606, set palette = c00cd670
vesafb: pmi: ports = 3b4 3b5 3ba 3c0 3c1 3c4 3c5 3c6 3c7 3c8 3c9 3cc 3ce 3cf 3d0 3d1 3d2 3d3 3d4 3d5 3da
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
bootsplash 3.1.6-2004/03/31: looking for picture...<6> silentjpeg size 81749 bytes,<6>...found (1024x768, 46202 bytes, v3).
Console: switching to colour frame buffer device 124x44
fb0: VESA VGA frame buffer device
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Real Time Clock Driver v1.12ac
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
ACPI: PCI Interrupt 0000:00:02.6[C] -> GSI 18 (level, low) -> IRQ 193
ACPI: PCI interrupt for device 0000:00:02.6 disabled
floppy0: no floppy controllers found
RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
i8042.c: Detected active multiplexing controller, rev 1.1.
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
mice: PS/2 mouse device common for all mice
input: PC Speaker as /class/input/input0
md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: bitmap version 4.39
NET: Registered protocol family 1
Using IPI No-Shortcut mode
ACPI: (supports S0 S1 S3 S4 S5)
Time: tsc clocksource has been installed.
Freeing unused kernel memory: 196k freed
input: AT Translated Set 2 keyboard as /class/input/input1
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
ACPI: Processor [CPU1] (supports 8 throttling states)
ACPI: Thermal Zone [THRM] (25 C)
SIS5513: IDE controller at PCI slot 0000:00:02.5
SIS5513: chipset revision 1
SIS5513: not 100% native mode: will probe irqs later
SIS5513: SiS 962/963 MuTIOL IDE UDMA133 controller
ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:DMA
Probing IDE interface ide0...
Time: acpi_pm clocksource has been installed.
Synaptics Touchpad, model: 1, fw: 6.1, id: 0xa3a0b3, caps: 0xa04713/0x10008
input: SynPS/2 Synaptics TouchPad as /class/input/input2
hda: HTE721010G9AT00, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: max request size: 512KiB
hda: 195371568 sectors (100030 MB) w/7539KiB Cache, CHS=16383/255/63, UDMA(33)
hda: cache flushes supported
hda: hda1 hda2 < hda5 hda6 > hda3 hda4
Probing IDE interface ide1...
hdc: TSSTcorpCD/DVDW TS-L632C, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
ACPI: Transitioning device [FN00] to D3
ACPI: Transitioning device [FN00] to D3
ACPI: Fan [FN00] (off)
BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
Attempting manual resume
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda6, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
usbcore: registered new driver usbfs
Yenta: CardBus bridge found at 0000:00:0a.0 [1043:1107]
Yenta: ISA IRQ mask 0x04b8, PCI irq 169
Socket status: 30000006
usbcore: registered new driver hub
sdhci: Secure Digital Host Controller Interface driver, 0.12
sdhci: Copyright(c) Pierre Ossman
sdhci: SDHCI controller found at 0000:00:0a.2 [1180:0822] (rev 17)
ACPI: PCI Interrupt 0000:00:0a.2[C] -> GSI 19 (level, low) -> IRQ 201
ieee80211_crypt: registered algorithm 'NULL'
mmc0: SDHCI at 0xfebf9400 irq 201 DMA
ieee80211: 802.11 data/management/control stack, git-1.1.13
ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 20 (level, low) -> IRQ 209
ohci_hcd 0000:00:03.0: OHCI Host Controller
ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 1
ohci_hcd 0000:00:03.0: irq 209, io mem 0xfebff000
usb usb1: new device found, idVendor=0000, idProduct=0000
usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: OHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.18.2-34-default ohci_hcd
usb usb1: SerialNumber: 0000:00:03.0
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 3 ports detected
Linux agpgart interface v0.101 (c) Dave Jones
ACPI: PCI Interrupt 0000:00:03.3[D] -> GSI 23 (level, low) -> IRQ 217
ehci_hcd 0000:00:03.3: EHCI Host Controller
ehci_hcd 0000:00:03.3: new USB bus registered, assigned bus number 2
PCI: cache line size of 64 is not supported by device 0000:00:03.3
ehci_hcd 0000:00:03.3: irq 217, io mem 0xfebfc000
ehci_hcd 0000:00:03.3: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb2: new device found, idVendor=0000, idProduct=0000
usb usb2: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.18.2-34-default ehci_hcd
usb usb2: SerialNumber: 0000:00:03.3
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 8 ports detected
ACPI: PCI Interrupt 0000:00:02.7[C] -> GSI 18 (level, low) -> IRQ 193
usb 2-4: new high speed USB device using ehci_hcd and address 2
bcm43xx driver
usb 2-4: new device found, idVendor=0402, idProduct=5602
usb 2-4: new device strings: Mfr=0, Product=1, SerialNumber=0
usb 2-4: Product: USB2.0 Camera
usb 2-4: configuration #1 chosen from 1 choice
intel8x0_measure_ac97_clock: measured 55414 usecs
intel8x0: clocking to 48000
ACPI: PCI Interrupt 0000:00:03.1[B] -> GSI 21 (level, low) -> IRQ 225
ohci_hcd 0000:00:03.1: OHCI Host Controller
ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 3
ohci_hcd 0000:00:03.1: irq 225, io mem 0xfebfe000
ieee1394: Initialized config rom entry `ip1394'
usb usb3: new device found, idVendor=0000, idProduct=0000
usb usb3: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: OHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.18.2-34-default ohci_hcd
usb usb3: SerialNumber: 0000:00:03.1
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 3 ports detected
ACPI: PCI Interrupt 0000:00:03.2[C] -> GSI 22 (level, low) -> IRQ 233
ohci_hcd 0000:00:03.2: OHCI Host Controller
ohci_hcd 0000:00:03.2: new USB bus registered, assigned bus number 4
ohci_hcd 0000:00:03.2: irq 233, io mem 0xfebfd000
usb usb4: new device found, idVendor=0000, idProduct=0000
usb usb4: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: OHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.18.2-34-default ohci_hcd
usb usb4: SerialNumber: 0000:00:03.2
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:09.0[A] -> GSI 18 (level, low) -> IRQ 193
bcm43xx: Chip ID 0x4318, rev 0x2
bcm43xx: Number of cores: 4
bcm43xx: Core 0: ID 0x800, rev 0xd, vendor 0x4243, enabled
bcm43xx: Core 1: ID 0x812, rev 0x9, vendor 0x4243, disabled
bcm43xx: Core 2: ID 0x804, rev 0xc, vendor 0x4243, enabled
bcm43xx: Core 3: ID 0x80d, rev 0x7, vendor 0x4243, enabled
bcm43xx: PHY connected
bcm43xx: Detected PHY: Version: 3, Type 2, Revision 7
bcm43xx: Detected Radio: ID: 8205017f (Manuf: 17f Ver: 2050 Rev: 8)
bcm43xx: Radio turned off
bcm43xx: Radio turned off
r8169 Gigabit Ethernet driver 2.2LK-NAPI loaded
ACPI: PCI Interrupt 0000:00:0b.0[A] -> GSI 19 (level, low) -> IRQ 201
eth1: RTL8169sb/8110sb at 0xf886cc00, 00:17:31:2c:78:cc, IRQ 201
ACPI: PCI Interrupt 0000:00:0a.1[B] -> GSI 18 (level, low) -> IRQ 193
ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[193] MMIO=[febf9800-febf9fff] Max Packet=[2048] IR/IT contexts=[4/4]
usb 4-2: new full speed USB device using ohci_hcd and address 2
hdc: ATAPI 24X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
usb 4-2: new device found, idVendor=0b05, idProduct=1712
usb 4-2: new device strings: Mfr=0, Product=0, SerialNumber=3
usb 4-2: SerialNumber: 0194E8-5B-0002
usb 4-2: configuration #1 chosen from 1 choice
cs: IO port probe 0x100-0x3af:<6>eth0 renamed to ethxx0
clean.
cs: IO port probe 0x3e0-0x4ff: excluding 0x480-0x48f 0x4d0-0x4d7
cs: IO port probe 0x820-0x8ff: excluding 0x828-0x837 0x840-0x84f 0x858-0x8a7 0x8b0-0x8b7 0x8e0-0x8f7
cs: IO port probe 0xc00-0xcf7: clean.
cs: IO port probe 0xa00-0xaff: clean.
eth1 renamed to eth0
ieee1394: Host added: ID:BUS[0-00:1023] GUID[00e018000354d6c9]
ethxx0 renamed to eth1
Bluetooth: Core ver 2.10
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: HCI USB driver ver 2.9
usbcore: registered new driver hci_usb
Bluetooth: L2CAP ver 2.8
Bluetooth: L2CAP socket layer initialized
Bluetooth: HIDP (Human Interface Emulation) ver 1.1
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM ver 1.8
Adding 1558264k swap on /dev/hda3. Priority:-1 extents:1 across:1558264k
device-mapper: ioctl: 4.7.0-ioctl (2006-06-24) initialised: dm-devel@redhat.com
loop: loaded (max 8 devices)
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda4, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
NTFS driver 2.1.27 [Flags: R/W MODULE].
NTFS volume version 3.1.
NTFS-fs warning (device hda1): load_system_files(): Volume is dirty. Will not be able to remount read-write. Run chkdsk and mount in Windows.
NTFS volume version 3.1.
NTFS-fs warning (device hda5): load_system_files(): Volume is dirty. Will not be able to remount read-write. Run chkdsk and mount in Windows.
AppArmor: AppArmor initialized
audit(1189689692.693:2): AppArmor initialized

ip6_tables: (C) 2000-2006 Netfilter Core Team
ip_tables: (C) 2000-2006 Netfilter Core Team
Netfilter messages via NETLINK v0.30.
ip_conntrack version 2.4 (8190 buckets, 65520 max) - 228 bytes per conntrack
ACPI: AC Adapter [AC0] (off-line)
ACPI: Battery Slot [BAT0] (battery present)
ACPI: Power Button (FF) [PWRF]
ACPI: Power Button (CM) [PWRB]
ACPI: Lid Switch [LID]
ACPI: Sleep Button (CM) [SLPB]
powernow-k8: Found 1 AMD Turion(tm) 64 Mobile Technology MT-34 processors (version 2.00.00)
ACPI: Invalid package argument
ACPI Exception (acpi_processor-0270): AE_BAD_PARAMETER, Invalid _PSS data [20060707]
powernow-k8: 0 : fid 0x0 (800 MHz), vid 0x16
powernow-k8: 1 : fid 0x8 (1600 MHz), vid 0xc
powernow-k8: 2 : fid 0xa (1800 MHz), vid 0xa
r8169: eth0: link up
bcm43xx: set security called, .level = 0, .enabled = 0, .encrypt = 0
SoftMAC: Associate: Scanning for networks first.
SoftMAC: Associate: failed to initiate scan. Is device up?
bcm43xx: PHY connected
bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
bcm43xx: core_up for active 802.11 core failed (-2)
audit(1189682527.899:3): audit_pid=4586 old=0 by auid=4294967295
bootsplash: status on console 0 changed to on
NET: Registered protocol family 4
NET: Registered protocol family 3
NET: Registered protocol family 5
ieee80211_crypt: registered algorithm 'TKIP'
bcm43xx: set security called, .level = 2, .enabled = 1, .encrypt = 1
ieee80211_crypt: registered algorithm 'CCMP'
bcm43xx: set security called, .level = 4, .enabled = 1, .encrypt = 1
bcm43xx: set security called, .level = 2, .enabled = 1, .encrypt = 1
bcm43xx: set security called, .level = 4, .enabled = 1, .encrypt = 1
bcm43xx: set security called, .level = 2, .enabled = 1, .encrypt = 1
bcm43xx: set security called, .level = 4, .enabled = 1, .encrypt = 1
bcm43xx: set security called, .level = 2, .enabled = 1, .encrypt = 1
bcm43xx: set security called, .level = 4, .enabled = 1, .encrypt = 1
bcm43xx: set security called, .level = 2, .enabled = 1, .encrypt = 1
bcm43xx: set security called, .level = 4, .enabled = 1, .encrypt = 1
bcm43xx: set security called, .level = 2, .enabled = 1, .encrypt = 1
bcm43xx: set security called, .level = 4, .enabled = 1, .encrypt = 1
r8169: eth0: link up
bcm43xx: set security called, .level = 0, .enabled = 0, .encrypt = 0
SoftMAC: Associate: Scanning for networks first.
SoftMAC: Associate: failed to initiate scan. Is device up?
bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
bcm43xx: core_up for active 802.11 core failed (-2)
bcm43xx: set security called, .level = 2, .enabled = 1, .encrypt = 1
bcm43xx: set security called, .level = 4, .enabled = 1, .encrypt = 1
bcm43xx: set security called, .level = 2, .enabled = 1, .encrypt = 1
bcm43xx: set security called, .level = 4, .enabled = 1, .encrypt = 1
bcm43xx: set security called, .level = 2, .enabled = 1, .encrypt = 1
bcm43xx: set security called, .level = 4, .enabled = 1, .encrypt = 1
bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
bcm43xx: core_up for active 802.11 core failed (-2)
bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
bcm43xx: core_up for active 802.11 core failed (-2)
SoftMAC: Canceling existing associate request!
SoftMAC: Associate: Scanning for networks first.
SoftMAC: Associate: failed to initiate scan. Is device up?
bcm43xx: set security called, .level = 0, .enabled = 0, .encrypt = 0
r8169: eth0: link up
SoftMAC: ASSERTION FAILED (0) at: net/ieee80211/softmac/ieee80211softmac_wx.c:306:ieee80211softmac_wx_get_ rate()
SoftMAC: ASSERTION FAILED (0) at: net/ieee80211/softmac/ieee80211softmac_wx.c:306:ieee80211softmac_wx_get_ rate()
NET: Registered protocol family 17
SoftMAC: Canceling existing associate request!
SoftMAC: Unable to find matching network after scan!
bcm43xx: set security called, .level = 0, .enabled = 0, .encrypt = 0
bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
bcm43xx: core_up for active 802.11 core failed (-2)
bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
bcm43xx: core_up for active 802.11 core failed (-2)
SoftMAC: Associate: Scanning for networks first.
SoftMAC: Associate: failed to initiate scan. Is device up?
bcm43xx: set security called, .level = 0, .enabled = 0, .encrypt = 0
r8169: eth0: link up
SoftMAC: ASSERTION FAILED (0) at: net/ieee80211/softmac/ieee80211softmac_wx.c:306:ieee80211softmac_wx_get_ rate()
SoftMAC: ASSERTION FAILED (0) at: net/ieee80211/softmac/ieee80211softmac_wx.c:306:ieee80211softmac_wx_get_ rate()
bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
bcm43xx: core_up for active 802.11 core failed (-2)
bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
bcm43xx: core_up for active 802.11 core failed (-2)
bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
bcm43xx: core_up for active 802.11 core failed (-2)
bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
bcm43xx: core_up for active 802.11 core failed (-2)
bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
bcm43xx: core_up for active 802.11 core failed (-2)
bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
bcm43xx: core_up for active 802.11 core failed (-2)
bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
bcm43xx: core_up for active 802.11 core failed (-2)
bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
bcm43xx: core_up for active 802.11 core failed (-2)
bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
bcm43xx: core_up for active 802.11 core failed (-2)


ich hoffe das ich es richtig gemacht habe:confused:

[Rain_maker]

Das ist deutlich:


bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
bcm43xx: core_up for active 802.11 core failed (-2)

Ohne Firmware, nix WLAN.

Fertige rpm-Pakete gibts hier:

http://www.pc-forum24.de/downloads.php?do=cat&id=27

Ich würde es entweder mit:

bcm43xx-firmware-1-bcmwl5.rm.0.noarch.rpm

oder mit:

bcm43xx-firmware-3.130.20.0-rm.0.noarch.rpm

versuchen.

Greetz,

RM

[crow_master]

So ich sehe jetzt mein Wlan, aber ich kann mich nicht verbinden:(

Habe eine Feste IP vergeben, Verschlüsselung ist WPA2

Mit meinen anderen Notebook (Windoof) gehts ohne probs.

Was mach ich nur verkehrt.



00:00.0 Host bridge: Silicon Integrated Systems [SiS] Unknown device 0756 (rev 0
2)
00:01.0 PCI bridge: Silicon Integrated Systems [SiS] PCI-to-PCI bridge
00:02.0 ISA bridge: Silicon Integrated Systems [SiS] SiS964 [MuTIOL Media IO] (r
ev 36)
00:02.5 IDE interface: Silicon Integrated Systems [SiS] 5513 [IDE] (rev 01)
00:02.6 Modem: Silicon Integrated Systems [SiS] AC'97 Modem Controller (rev a0)
00:02.7 Multimedia audio controller: Silicon Integrated Systems [SiS] AC'97 Soun
d Controller (rev a0)
00:03.0 USB Controller: Silicon Integrated Systems [SiS] USB 1.0 Controller (rev
0f)
00:03.1 USB Controller: Silicon Integrated Systems [SiS] USB 1.0 Controller (rev
0f)
00:03.2 USB Controller: Silicon Integrated Systems [SiS] USB 1.0 Controller (rev 0f)
00:03.3 USB Controller: Silicon Integrated Systems [SiS] USB 2.0 Controller
00:09.0 Network controller: Broadcom Corporation BCM4318 [AirForce One 54g] 802. 11g Wireless LAN Controller (rev 02)
00:0a.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev b3)
00:0a.1 FireWire (IEEE 1394): Ricoh Co Ltd R5C552 IEEE 1394 Controller (rev 08)
00:0a.2 Generic system peripheral [Class 0805]: Ricoh Co Ltd R5C822 SD/SDIO/MMC/ MS/MSPro Host Adapter (rev 17)
00:0a.3 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (re v 08)
00:0b.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8169 Gigabit Et hernet (rev 10)
00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTra nsport Technology Configuration
00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Con troller
00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscella neous Control
01:00.0 VGA compatible controller: nVidia Corporation Quadro NVS 110M / GeForce Go 7300 (rev a1)
Beetle:~ # dmesg
Linux version 2.6.18.2-34-default (geeko@buildhost) (gcc version 4.1.2 20061115 (prerelease) (SUSE Linux)) #1 SMP Mon Nov 27 11:46:27 UTC 2006
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000003ffd0000 (usable)
BIOS-e820: 000000003ffd0000 - 000000003ffde000 (ACPI data)
BIOS-e820: 000000003ffde000 - 0000000040000000 (ACPI NVS)
BIOS-e820: 00000000ff780000 - 0000000100000000 (reserved)
127MB HIGHMEM available.
896MB LOWMEM available.
On node 0 totalpages: 262096
DMA zone: 4096 pages, LIFO batch:0
Normal zone: 225280 pages, LIFO batch:31
HighMem zone: 32720 pages, LIFO batch:7
DMI 2.3 present.
Using APIC driver default
IO/L-APIC allowed because system is MP or new enough
ACPI: RSDP (v000 ACPIAM ) @ 0x000f7870
ACPI: RSDT (v001 A M I OEMRSDT 0x05000608 MSFT 0x00000097) @ 0x3ffd0000
ACPI: FADT (v002 A M I OEMFACP 0x05000608 MSFT 0x00000097) @ 0x3ffd0200
ACPI: MADT (v001 A M I OEMAPIC 0x05000608 MSFT 0x00000097) @ 0x3ffd0390
ACPI: MCFG (v001 A M I OEMMCFG 0x05000608 MSFT 0x00000097) @ 0x3ffd03f0
ACPI: OEMB (v001 A M I AMI_OEM 0x05000608 MSFT 0x00000097) @ 0x3ffde040
ACPI: DSDT (v001 1ABZX 1ABZX001 0x00000001 INTL 0x02002026) @ 0x00000000
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Processor #0 15:4 APIC version 16
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, version 20, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode: Flat. Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 50000000 (gap: 40000000:bf780000)
Detected 1800.108 MHz processor.
Built 1 zonelists. Total pages: 262096
Kernel command line: root=/dev/hda6 vga=0x317 resume=/dev/hda3 splash=silent
bootsplash: silent mode.
mapped APIC to ffffd000 (fee00000)
mapped IOAPIC to ffffc000 (fec00000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 16384 bytes)
Console: colour dummy device 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 1032148k/1048384k available (1697k kernel code, 15472k reserved, 968k data, 196k init, 130880k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 3602.10 BogoMIPS (lpj=7204214)
Security Framework v1.0.0 initialized
Mount-cache hash table entries: 512
CPU: After generic identify, caps: 078bfbff e3d3fbff 00000000 00000000 00000001 00000000 00000001
CPU: After vendor identify, caps: 078bfbff e3d3fbff 00000000 00000000 00000001 00000000 00000001
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
CPU: After all inits, caps: 078bfbff e3d3fbff 00000000 00000410 00000001 00000000 00000001
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Compat vDSO mapped to ffffe000.
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
Freeing SMP alternatives: 16k freed
checking if image is initramfs... it is
Freeing initrd memory: 3149k freed
ACPI: Core revision 20060707
CPU0: AMD Turion(tm) 64 Mobile Technology MT-34 stepping 02
Total of 1 processors activated (3602.10 BogoMIPS).
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
Brought up 1 CPUs
migration_cost=0
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: BIOS Bug: MCFG area at e0000000 is not E820-reserved
PCI: Not using MMCONFIG.
PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=1
PCI: Using configuration type 1
Setting up standard PCI resources
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
Boot video device is 0000:01:00.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
ACPI: Embedded Controller [EC0] (gpe 25) interrupt mode.
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 *4 5 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 7 10 11 12 14 15)
ACPI: Power Resource [GFAN] (off)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 12 devices
PnPBIOS: Disabled by ACPI PNP
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
pnp: 00:07: ioport range 0xa00-0xa0f has been reserved
PCI: Bridge: 0000:00:01.0
IO window: disabled.
MEM window: fa200000-fe2fffff
PREFETCH window: bde00000-ddefffff
PCI: Bus 2, cardbus bridge: 0000:00:0a.0
IO window: 00001000-000010ff
IO window: 00001400-000014ff
PREFETCH window: 50000000-51ffffff
MEM window: 52000000-53ffffff
PCI: Setting latency timer of device 0000:00:01.0 to 64
ACPI: PCI Interrupt 0000:00:0a.0[A] -> GSI 17 (level, low) -> IRQ 169
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
Machine check exception polling timer started.
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
apm: overridden by ACPI.
audit: initializing netlink socket (disabled)
audit(1189714386.680:1): initialized
highmem bounce pool size: 64 pages
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Initializing Cryptographic API
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
PCI: Setting latency timer of device 0000:00:01.0 to 64
pcie_portdrv_probe->Dev[0004:1039] has invalid IRQ. Check vendor BIOS
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:01.0:pcie00]
vesafb: framebuffer at 0xc0000000, mapped to 0xf8880000, using 6144k, total 65536k
vesafb: mode is 1024x768x16, linelength=2048, pages=1
vesafb: protected mode interface info at c000:d5d0
vesafb: pmi: set display start = c00cd606, set palette = c00cd670
vesafb: pmi: ports = 3b4 3b5 3ba 3c0 3c1 3c4 3c5 3c6 3c7 3c8 3c9 3cc 3ce 3cf 3d0 3d1 3d2 3d3 3d4 3d5 3da
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
bootsplash 3.1.6-2004/03/31: looking for picture...<6> silentjpeg size 81749 bytes,<6>...found (1024x768, 46202 bytes, v3).
Console: switching to colour frame buffer device 124x44
fb0: VESA VGA frame buffer device
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Real Time Clock Driver v1.12ac
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
ACPI: PCI Interrupt 0000:00:02.6[C] -> GSI 18 (level, low) -> IRQ 193
ACPI: PCI interrupt for device 0000:00:02.6 disabled
floppy0: no floppy controllers found
RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
i8042.c: Detected active multiplexing controller, rev 1.1.
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
mice: PS/2 mouse device common for all mice
input: PC Speaker as /class/input/input0
md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: bitmap version 4.39
NET: Registered protocol family 1
Using IPI No-Shortcut mode
ACPI: (supports<6>Time: tsc clocksource has been installed.
S0 S1 S3 S4 S5)
Freeing unused kernel memory: 196k freed
input: AT Translated Set 2 keyboard as /class/input/input1
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
ACPI: Processor [CPU1] (supports 8 throttling states)
ACPI: Thermal Zone [THRM] (59 C)
SIS5513: IDE controller at PCI slot 0000:00:02.5
SIS5513: chipset revision 1
SIS5513: not 100% native mode: will probe irqs later
SIS5513: SiS 962/963 MuTIOL IDE UDMA133 controller
ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:DMA
Probing IDE interface ide0...
Time: acpi_pm clocksource has been installed.
hda: HTE721010G9AT00, ATA DISK drive
Synaptics Touchpad, model: 1, fw: 6.1, id: 0xa3a0b3, caps: 0xa04713/0x10008
input: SynPS/2 Synaptics TouchPad as /class/input/input2
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: max request size: 512KiB
hda: 195371568 sectors (100030 MB) w/7539KiB Cache, CHS=16383/255/63, UDMA(33)
hda: cache flushes supported
hda: hda1 hda2 < hda5 hda6 > hda3 hda4
Probing IDE interface ide1...
hdc: TSSTcorpCD/DVDW TS-L632C, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
ACPI: Fan [FN00] (on)
BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
Attempting manual resume
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda6, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
ieee1394: Initialized config rom entry `ip1394'
ACPI: PCI Interrupt 0000:00:02.7[C] -> GSI 18 (level, low) -> IRQ 193
usbcore: registered new driver usbfs
usbcore: registered new driver hub
ieee80211_crypt: registered algorithm 'NULL'
ieee80211: 802.11 data/management/control stack, git-1.1.13
ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
sdhci: Secure Digital Host Controller Interface driver, 0.12
sdhci: Copyright(c) Pierre Ossman
Linux agpgart interface v0.101 (c) Dave Jones
bcm43xx driver
hdc: ATAPI 24X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
intel8x0_measure_ac97_clock: measured 55423 usecs
intel8x0: clocking to 48000
ACPI: PCI Interrupt 0000:00:0a.1[B] -> GSI 18 (level, low) -> IRQ 193
ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[193] MMIO=[febf9800-febf9fff] Max Packet=[2048] IR/IT contexts=[4/4]
ACPI: PCI Interrupt 0000:00:03.3[D] -> GSI 23 (level, low) -> IRQ 201
ehci_hcd 0000:00:03.3: EHCI Host Controller
ehci_hcd 0000:00:03.3: new USB bus registered, assigned bus number 1
PCI: cache line size of 64 is not supported by device 0000:00:03.3
ehci_hcd 0000:00:03.3: irq 201, io mem 0xfebfc000
ehci_hcd 0000:00:03.3: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: new device found, idVendor=0000, idProduct=0000
usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.18.2-34-default ehci_hcd
usb usb1: SerialNumber: 0000:00:03.3
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 20 (level, low) -> IRQ 209
ohci_hcd 0000:00:03.0: OHCI Host Controller
ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:03.0: irq 209, io mem 0xfebff000
usb usb2: new device found, idVendor=0000, idProduct=0000
usb usb2: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: OHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.18.2-34-default ohci_hcd
usb usb2: SerialNumber: 0000:00:03.0
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 3 ports detected
ACPI: PCI Interrupt 0000:00:03.1[B] -> GSI 21 (level, low) -> IRQ 217
ohci_hcd 0000:00:03.1: OHCI Host Controller
ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 3
ohci_hcd 0000:00:03.1: irq 217, io mem 0xfebfe000
usb 1-4: new high speed USB device using ehci_hcd and address 2
usb usb3: new device found, idVendor=0000, idProduct=0000
usb usb3: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: OHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.18.2-34-default ohci_hcd
usb usb3: SerialNumber: 0000:00:03.1
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 3 ports detected
usb 1-4: new device found, idVendor=0402, idProduct=5602
usb 1-4: new device strings: Mfr=0, Product=1, SerialNumber=0
usb 1-4: Product: USB2.0 Camera
usb 1-4: configuration #1 chosen from 1 choice
ACPI: PCI Interrupt 0000:00:03.2[C] -> GSI 22 (level, low) -> IRQ 225
ohci_hcd 0000:00:03.2: OHCI Host Controller
ohci_hcd 0000:00:03.2: new USB bus registered, assigned bus number 4
ohci_hcd 0000:00:03.2: irq 225, io mem 0xfebfd000
usb usb4: new device found, idVendor=0000, idProduct=0000
usb usb4: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: OHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.18.2-34-default ohci_hcd
usb usb4: SerialNumber: 0000:00:03.2
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
sdhci: SDHCI controller found at 0000:00:0a.2 [1180:0822] (rev 17)
ACPI: PCI Interrupt 0000:00:0a.2[C] -> GSI 19 (level, low) -> IRQ 233
mmc0: SDHCI at 0xfebf9400 irq 233 DMA
r8169 Gigabit Ethernet driver 2.2LK-NAPI loaded
ACPI: PCI Interrupt 0000:00:0b.0[A] -> GSI 19 (level, low) -> IRQ 233
eth0: RTL8169sb/8110sb at 0xf905ec00, 00:17:31:2c:78:cc, IRQ 233
Yenta: CardBus bridge found at 0000:00:0a.0 [1043:1107]
Yenta: ISA IRQ mask 0x04b8, PCI irq 169
Socket status: 30000006
ACPI: PCI Interrupt 0000:00:09.0[A] -> GSI 18 (level, low) -> IRQ 193
bcm43xx: Chip ID 0x4318, rev 0x2
bcm43xx: Number of cores: 4
bcm43xx: Core 0: ID 0x800, rev 0xd, vendor 0x4243, enabled
bcm43xx: Core 1: ID 0x812, rev 0x9, vendor 0x4243, disabled
bcm43xx: Core 2: ID 0x804, rev 0xc, vendor 0x4243, enabled
bcm43xx: Core 3: ID 0x80d, rev 0x7, vendor 0x4243, enabled
bcm43xx: PHY connected
bcm43xx: Detected PHY: Version: 3, Type 2, Revision 7
bcm43xx: Detected Radio: ID: 8205017f (Manuf: 17f Ver: 2050 Rev: 8)
bcm43xx: Radio turned off
bcm43xx: Radio turned off
usb 4-2: new full speed USB device using ohci_hcd and address 2
ieee1394: Host added: ID:BUS[0-00:1023] GUID[00e018000354d6c9]
usb 4-2: new device found, idVendor=0b05, idProduct=1712
usb 4-2: new device strings: Mfr=0, Product=0, SerialNumber=3
usb 4-2: SerialNumber: 0194E8-5B-0002
usb 4-2: configuration #1 chosen from 1 choice
Bluetooth: Core ver 2.10
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
cs: IO port probe 0x100-0x3af: clean.
cs: IO port probe 0x3e0-0x4ff: excluding 0x480-0x48f 0x4d0-0x4d7
cs: IO port probe 0x820-0x8ff: excluding 0x828-0x837 0x840-0x84f 0x858-0x8a7 0x8b0-0x8b7 0x8e0-0x8f7
cs: IO port probe 0xc00-0xcf7: clean.
cs: IO port probe 0xa00-0xaff: clean.
Bluetooth: HCI USB driver ver 2.9
usbcore: registered new driver hci_usb
Bluetooth: L2CAP ver 2.8
Bluetooth: L2CAP socket layer initialized
Bluetooth: HIDP (Human Interface Emulation) ver 1.1
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM ver 1.8
Adding 1558264k swap on /dev/hda3. Priority:-1 extents:1 across:1558264k
device-mapper: ioctl: 4.7.0-ioctl (2006-06-24) initialised: dm-devel@redhat.com
loop: loaded (max 8 devices)
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda4, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
NTFS driver 2.1.27 [Flags: R/W MODULE].
NTFS volume version 3.1.
NTFS-fs warning (device hda1): load_system_files(): Volume is dirty. Will not be able to remount read-write. Run chkdsk and mount in Windows.
NTFS volume version 3.1.
NTFS-fs warning (device hda5): load_system_files(): Volume is dirty. Will not be able to remount read-write. Run chkdsk and mount in Windows.
AppArmor: AppArmor initialized
audit(1189714403.893:2): AppArmor initialized

ip6_tables: (C) 2000-2006 Netfilter Core Team
ip_tables: (C) 2000-2006 Netfilter Core Team
Netfilter messages via NETLINK v0.30.
ip_conntrack version 2.4 (8190 buckets, 65520 max) - 228 bytes per conntrack
ACPI: AC Adapter [AC0] (on-line)
ACPI: Battery Slot [BAT0] (battery present)
ACPI: Power Button (FF) [PWRF]
ACPI: Power Button (CM) [PWRB]
ACPI: Lid Switch [LID]
ACPI: Sleep Button (CM) [SLPB]
powernow-k8: Found 1 AMD Turion(tm) 64 Mobile Technology MT-34 processors (version 2.00.00)
ACPI: Invalid package argument
ACPI Exception (acpi_processor-0270): AE_BAD_PARAMETER, Invalid _PSS data [20060707]
powernow-k8: 0 : fid 0x0 (800 MHz), vid 0x16
powernow-k8: 1 : fid 0x8 (1600 MHz), vid 0xc
powernow-k8: 2 : fid 0xa (1800 MHz), vid 0xa
audit(1189707217.655:3): audit_pid=2994 old=0 by auid=4294967295
bcm43xx: PHY connected
bcm43xx: Microcode rev 0x127, pl 0xe (2005-04-18 02:36:27)
bcm43xx: Radio turned on
bcm43xx: ASSERTION FAILED (radio_attenuation < 10) at: drivers/net/wireless/bcm43xx/bcm43xx_phy.c:1496:bcm43xx_find_lopair()
bcm43xx: WARNING: Writing invalid LOpair (low: 88, high: 60, index: 120)
[<f91d258c>] bcm43xx_phy_lo_adjust+0x1e5/0x224 [bcm43xx]
[<f91d41a7>] bcm43xx_phy_initb6+0x699/0x7c9 [bcm43xx]
[<c0104ecf>] apic_timer_interrupt+0x1f/0x30
[<f91d4381>] bcm43xx_phy_initg+0xaa/0xd29 [bcm43xx]
[<c01c317b>] delay_tsc+0x7/0x13
[<c01c31b0>] __delay+0x6/0x7
[<f91cbc3f>] bcm43xx_radio_selectchannel+0x45f/0x46b [bcm43xx]
[<f91d6013>] bcm43xx_phy_init+0x5e5/0x603 [bcm43xx]
[<f91cf9f8>] bcm43xx_radio_turn_on+0x1d1/0x1e2 [bcm43xx]
[<f91c56aa>] bcm43xx_write_initvals+0x56/0x89 [bcm43xx]
[<f91c6dc7>] bcm43xx_chip_init+0x735/0xa2e [bcm43xx]
[<f91c849d>] wireless_core_up+0x1aa/0x69c [bcm43xx]
[<f91c5dc5>] bcm43xx_switch_core+0x27/0x38 [bcm43xx]
[<f91d6304>] bcm43xx_pctl_set_clock+0xd9/0x115 [bcm43xx]
[<f91c8cfa>] bcm43xx_select_wireless_core+0x36b/0x4ba [bcm43xx]
[<f91c5dc5>] bcm43xx_switch_core+0x27/0x38 [bcm43xx]
[<f91d68ad>] bcm43xx_pctl_init+0x8f/0xd2 [bcm43xx]
[<f91c8f39>] bcm43xx_init_board+0x47/0x11e [bcm43xx]
[<c025a342>] rtnetlink_dump_ifinfo+0x5f/0x80
[<c02a5ce7>] _spin_lock_bh+0x8/0x18
[<c02541e7>] dev_open+0x2b/0x62
[<c0252bd0>] dev_change_flags+0x46/0xe3
[<c025ab3a>] do_setlink+0x0/0x36a
[<c025abab>] do_setlink+0x71/0x36a
[<c02671a8>] netlink_dump_start+0xf9/0x116
[<c025ab3a>] do_setlink+0x0/0x36a
[<c025a59b>] rtnetlink_rcv_msg+0x1be/0x1e3
[<c025a2e3>] rtnetlink_dump_ifinfo+0x0/0x80
[<c0266288>] netlink_run_queue+0x63/0xfb
[<c025a3dd>] rtnetlink_rcv_msg+0x0/0x1e3
[<c025a39c>] rtnetlink_rcv+0x25/0x3d
[<c026672e>] netlink_data_ready+0x12/0x4c
[<c0265732>] netlink_sendskb+0x19/0x30
[<c0266710>] netlink_sendmsg+0x278/0x284
[<c0249a21>] sock_sendmsg+0xd0/0xeb
[<c01314f2>] autoremove_wake_function+0x0/0x35
[<c01314f2>] autoremove_wake_function+0x0/0x35
[<c02a1190>] unix_stream_recvmsg+0x38e/0x4af
[<c01c375d>] copy_from_user+0x31/0x5d
[<c01c375d>] copy_from_user+0x31/0x5d
[<c024a052>] sys_sendmsg+0x192/0x1f7
[<c024ae4b>] sys_recvmsg+0x148/0x1d0
[<c0265986>] netlink_insert+0x106/0x110
[<c01c3969>] copy_to_user+0x31/0x48
[<c024aceb>] move_addr_to_user+0x51/0x69
[<c024b176>] sys_getsockname+0x86/0xb0
[<c02a5ce7>] _spin_lock_bh+0x8/0x18
[<c024bf04>] release_sock+0xf/0x99
[<c024cf22>] sock_setsockopt+0x49f/0x4a9
[<c0163153>] get_unused_fd+0x57/0xbd
[<c0249ea6>] sockfd_lookup_light+0x24/0x3e
[<c024b5a8>] sys_socketcall+0x240/0x261
[<c0103d5d>] sysenter_past_esp+0x56/0x79
bcm43xx: ASSERTION FAILED (radio_attenuation < 10) at: drivers/net/wireless/bcm43xx/bcm43xx_phy.c:1496:bcm43xx_find_lopair()
bcm43xx: WARNING: Writing invalid LOpair (low: 88, high: 60, index: 120)
[<f91d258c>] bcm43xx_phy_lo_adjust+0x1e5/0x224 [bcm43xx]
[<f91d4eaf>] bcm43xx_phy_initg+0xbd8/0xd29 [bcm43xx]
[<c01c317b>] delay_tsc+0x7/0x13
[<f91d6013>] bcm43xx_phy_init+0x5e5/0x603 [bcm43xx]
[<f91cf9f8>] bcm43xx_radio_turn_on+0x1d1/0x1e2 [bcm43xx]
[<f91c56aa>] bcm43xx_write_initvals+0x56/0x89 [bcm43xx]
[<f91c6dc7>] bcm43xx_chip_init+0x735/0xa2e [bcm43xx]
[<f91c849d>] wireless_core_up+0x1aa/0x69c [bcm43xx]
[<f91c5dc5>] bcm43xx_switch_core+0x27/0x38 [bcm43xx]
[<f91d6304>] bcm43xx_pctl_set_clock+0xd9/0x115 [bcm43xx]
[<f91c8cfa>] bcm43xx_select_wireless_core+0x36b/0x4ba [bcm43xx]
[<f91c5dc5>] bcm43xx_switch_core+0x27/0x38 [bcm43xx]
[<f91d68ad>] bcm43xx_pctl_init+0x8f/0xd2 [bcm43xx]
[<f91c8f39>] bcm43xx_init_board+0x47/0x11e [bcm43xx]
[<c025a342>] rtnetlink_dump_ifinfo+0x5f/0x80
[<c02a5ce7>] _spin_lock_bh+0x8/0x18
[<c02541e7>] dev_open+0x2b/0x62
[<c0252bd0>] dev_change_flags+0x46/0xe3
[<c025ab3a>] do_setlink+0x0/0x36a
[<c025abab>] do_setlink+0x71/0x36a
[<c02671a8>] netlink_dump_start+0xf9/0x116
[<c025ab3a>] do_setlink+0x0/0x36a
[<c025a59b>] rtnetlink_rcv_msg+0x1be/0x1e3
[<c025a2e3>] rtnetlink_dump_ifinfo+0x0/0x80
[<c0266288>] netlink_run_queue+0x63/0xfb
[<c025a3dd>] rtnetlink_rcv_msg+0x0/0x1e3
[<c025a39c>] rtnetlink_rcv+0x25/0x3d
[<c026672e>] netlink_data_ready+0x12/0x4c
[<c0265732>] netlink_sendskb+0x19/0x30
[<c0266710>] netlink_sendmsg+0x278/0x284
[<c0249a21>] sock_sendmsg+0xd0/0xeb
[<c01314f2>] autoremove_wake_function+0x0/0x35
[<c01314f2>] autoremove_wake_function+0x0/0x35
[<c02a1190>] unix_stream_recvmsg+0x38e/0x4af
[<c01c375d>] copy_from_user+0x31/0x5d
[<c01c375d>] copy_from_user+0x31/0x5d
[<c024a052>] sys_sendmsg+0x192/0x1f7
[<c024ae4b>] sys_recvmsg+0x148/0x1d0
[<c0265986>] netlink_insert+0x106/0x110
[<c01c3969>] copy_to_user+0x31/0x48
[<c024aceb>] move_addr_to_user+0x51/0x69
[<c024b176>] sys_getsockname+0x86/0xb0
[<c02a5ce7>] _spin_lock_bh+0x8/0x18
[<c024bf04>] release_sock+0xf/0x99
[<c024cf22>] sock_setsockopt+0x49f/0x4a9
[<c0163153>] get_unused_fd+0x57/0xbd
[<c0249ea6>] sockfd_lookup_light+0x24/0x3e
[<c024b5a8>] sys_socketcall+0x240/0x261
[<c0103d5d>] sysenter_past_esp+0x56/0x79
bcm43xx: ASSERTION FAILED (radio_attenuation < 10) at: drivers/net/wireless/bcm43xx/bcm43xx_phy.c:1496:bcm43xx_find_lopair()
bcm43xx: WARNING: Writing invalid LOpair (low: 88, high: 60, index: 120)
[<f91d258c>] bcm43xx_phy_lo_adjust+0x1e5/0x224 [bcm43xx]
[<f91d2385>] bcm43xx_phy_init_pctl+0x202/0x224 [bcm43xx]
[<f91cb3b5>] bcm43xx_calc_nrssi_threshold+0x28a/0x30a [bcm43xx]
[<f91d4f8e>] bcm43xx_phy_initg+0xcb7/0xd29 [bcm43xx]
[<c01c317b>] delay_tsc+0x7/0x13
[<f91d6013>] bcm43xx_phy_init+0x5e5/0x603 [bcm43xx]
[<f91cf9f8>] bcm43xx_radio_turn_on+0x1d1/0x1e2 [bcm43xx]
[<f91c56aa>] bcm43xx_write_initvals+0x56/0x89 [bcm43xx]
[<f91c6dc7>] bcm43xx_chip_init+0x735/0xa2e [bcm43xx]
[<f91c849d>] wireless_core_up+0x1aa/0x69c [bcm43xx]
[<f91c5dc5>] bcm43xx_switch_core+0x27/0x38 [bcm43xx]
[<f91d6304>] bcm43xx_pctl_set_clock+0xd9/0x115 [bcm43xx]
[<f91c8cfa>] bcm43xx_select_wireless_core+0x36b/0x4ba [bcm43xx]
[<f91c5dc5>] bcm43xx_switch_core+0x27/0x38 [bcm43xx]
[<f91d68ad>] bcm43xx_pctl_init+0x8f/0xd2 [bcm43xx]
[<f91c8f39>] bcm43xx_init_board+0x47/0x11e [bcm43xx]
[<c025a342>] rtnetlink_dump_ifinfo+0x5f/0x80
[<c02a5ce7>] _spin_lock_bh+0x8/0x18
[<c02541e7>] dev_open+0x2b/0x62
[<c0252bd0>] dev_change_flags+0x46/0xe3
[<c025ab3a>] do_setlink+0x0/0x36a
[<c025abab>] do_setlink+0x71/0x36a
[<c02671a8>] netlink_dump_start+0xf9/0x116
[<c025ab3a>] do_setlink+0x0/0x36a
[<c025a59b>] rtnetlink_rcv_msg+0x1be/0x1e3
[<c025a2e3>] rtnetlink_dump_ifinfo+0x0/0x80
[<c0266288>] netlink_run_queue+0x63/0xfb
[<c025a3dd>] rtnetlink_rcv_msg+0x0/0x1e3
[<c025a39c>] rtnetlink_rcv+0x25/0x3d
[<c026672e>] netlink_data_ready+0x12/0x4c
[<c0265732>] netlink_sendskb+0x19/0x30
[<c0266710>] netlink_sendmsg+0x278/0x284
[<c0249a21>] sock_sendmsg+0xd0/0xeb
[<c01314f2>] autoremove_wake_function+0x0/0x35
[<c01314f2>] autoremove_wake_function+0x0/0x35
[<c02a1190>] unix_stream_recvmsg+0x38e/0x4af
[<c01c375d>] copy_from_user+0x31/0x5d
[<c01c375d>] copy_from_user+0x31/0x5d
[<c024a052>] sys_sendmsg+0x192/0x1f7
[<c024ae4b>] sys_recvmsg+0x148/0x1d0
[<c0265986>] netlink_insert+0x106/0x110
[<c01c3969>] copy_to_user+0x31/0x48
[<c024aceb>] move_addr_to_user+0x51/0x69
[<c024b176>] sys_getsockname+0x86/0xb0
[<c02a5ce7>] _spin_lock_bh+0x8/0x18
[<c024bf04>] release_sock+0xf/0x99
[<c024cf22>] sock_setsockopt+0x49f/0x4a9
[<c0163153>] get_unused_fd+0x57/0xbd
[<c0249ea6>] sockfd_lookup_light+0x24/0x3e
[<c024b5a8>] sys_socketcall+0x240/0x261
[<c0103d5d>] sysenter_past_esp+0x56/0x79
bcm43xx: Chip initialized
bcm43xx: 32-bit DMA initialized
bcm43xx: Keys cleared
bcm43xx: Selected 802.11 core (phytype 2)
bcm43xx: ASSERTION FAILED (radio_attenuation < 10) at: drivers/net/wireless/bcm43xx/bcm43xx_phy.c:1496:bcm43xx_find_lopair()
bcm43xx: WARNING: Writing invalid LOpair (low: 88, high: 60, index: 120)
[<f91d258c>] bcm43xx_phy_lo_adjust+0x1e5/0x224 [bcm43xx]
[<f91d33d0>] bcm43xx_phy_lo_g_measure+0x916/0xafb [bcm43xx]
[<f91c5216>] bcm43xx_shm_read32+0x2c/0xa1 [bcm43xx]
[<f91d6214>] bcm43xx_power_saving_ctl_bits+0x48/0x5f [bcm43xx]
[<f91c9b5b>] bcm43xx_periodic_work_handler+0x152/0x348 [bcm43xx]
[<c012e639>] run_workqueue+0x83/0xc5
[<f91c9a09>] bcm43xx_periodic_work_handler+0x0/0x348 [bcm43xx]
[<c012ef54>] worker_thread+0xd9/0x10d
[<c011a7e2>] default_wake_function+0x0/0xc
[<c012ee7b>] worker_thread+0x0/0x10d
[<c0131420>] kthread+0xc0/0xec
[<c0131360>] kthread+0x0/0xec
[<c0102005>] kernel_thread_helper+0x5/0xb
SoftMAC: Associate: Scanning for networks first.
SoftMAC: Start scanning with channel: 1
SoftMAC: Scanning 14 channels
SoftMAC: Scanning finished
SoftMAC: Associate: Scanning for networks first.
SoftMAC: Start scanning with channel: 1
SoftMAC: Scanning 14 channels
SoftMAC: Scanning finished
SoftMAC: Associate: Scanning for networks first.
SoftMAC: Start scanning with channel: 1
SoftMAC: Scanning 14 channels
SoftMAC: Scanning finished
SoftMAC: Unable to find matching network after scan!
SoftMAC: Start scanning with channel: 1
SoftMAC: Scanning 14 channels
SoftMAC: Scanning finished
SoftMAC: Associate: Scanning for networks first.
SoftMAC: Start scanning with channel: 1
SoftMAC: Scanning 14 channels
bcm43xx: set security called, .level = 0, .enabled = 0, .encrypt = 0
r8169: eth0: link down
SoftMAC: Scanning finished
SoftMAC: Associate: Scanning for networks first.
SoftMAC: Start scanning with channel: 1
SoftMAC: Scanning 14 channels
SoftMAC: Scanning finished
SoftMAC: Associate: Scanning for networks first.
SoftMAC: Start scanning with channel: 1
SoftMAC: Scanning 14 channels
SoftMAC: Scanning finished
SoftMAC: Unable to find matching network after scan!
NET: Registered protocol family 17
SoftMAC: Start scanning with channel: 1
SoftMAC: Scanning 14 channels
SoftMAC: Scanning finished
NET: Registered protocol family 4
NET: Registered protocol family 3
NET: Registered protocol family 5
SoftMAC: Start scanning with channel: 1
SoftMAC: Scanning 14 channels
SoftMAC: Scanning finished
SoftMAC: Start scanning with channel: 1
SoftMAC: Scanning 14 channels
SoftMAC: Scanning finished
SoftMAC: Associate: Scanning for networks first.
SoftMAC: Start scanning with channel: 1
SoftMAC: Scanning 14 channels
bcm43xx: set security called, .level = 0, .enabled = 0, .encrypt = 0
SoftMAC: Scanning finished
SoftMAC: Associate: Scanning for networks first.
SoftMAC: Start scanning with channel: 1
SoftMAC: Scanning 14 channels
SoftMAC: Scanning finished
SoftMAC: Associate: Scanning for networks first.
SoftMAC: Start scanning with channel: 1
SoftMAC: Scanning 14 channels
SoftMAC: Scanning finished
SoftMAC: Unable to find matching network after scan!
SoftMAC: Associate: Scanning for networks first.
SoftMAC: Start scanning with channel: 1
SoftMAC: Scanning 14 channels
bcm43xx: set security called, .level = 0, .enabled = 0, .encrypt = 0
SoftMAC: Scanning finished
SoftMAC: Associate: Scanning for networks first.
SoftMAC: Start scanning with channel: 1
SoftMAC: Scanning 14 channels
SoftMAC: Scanning finished
SoftMAC: Associate: Scanning for networks first.
SoftMAC: Start scanning with channel: 1
SoftMAC: Scanning 14 channels
SoftMAC: Scanning finished
SoftMAC: Unable to find matching network after scan!
SoftMAC: Start scanning with channel: 1
SoftMAC: Scanning 14 channels
SoftMAC: Scanning finished
SoftMAC: Start scanning with channel: 1
SoftMAC: Scanning 14 channels
SoftMAC: Scanning finished
SoftMAC: Start scanning with channel: 1
SoftMAC: Scanning 14 channels
SoftMAC: Scanning finished

[zyrusthc]

Was mach ich nur verkehrt.
Du teilst uns nicht mit was Du wie versucht hast!

Greeez Oli