PDA

Archiv verlassen und diese Seite im Standarddesign anzeigen : Ubuntu 7.04 fährt nicht runter


MATI
07.06.07, 20:04
Hallo,

ich habe schon die SUFU und google genutzt...
Ich habe das Problem dass ich über Kde nicht runterfahren kann. Wenn ich in die Konsole init 6 z.B eintippe dann klappt alles aber über die Oberfläche eben nicht.
Was könnte ich tun? Woran liegt das?

Danke für eure geduldigen Antworten :)
zeromancer1972
07.06.07, 20:19
Init 6 = Reboot und nicht shutdown.
Um ACPI auszuschließen brauche wir mehr Angaben über Dein System. Board. BIOS usw.
MiGo
07.06.07, 20:21
aber über die Oberfläche eben nicht.
Und das versuchst du genau wie? Steht was in den kdm-Logs? Fehlermeldungen?
MATI
07.06.07, 20:27
über die Oberfläche schalte ich einfach auf das kde zeichen und dann Abmelden und dann auf Herunterfahren.

Ich weiß dass init 6 ein reboot ist - sollte nur ein beispiel sein.


Um ACPI auszuschließen brauche wir mehr Angaben über Dein System. Board. BIOS usw.

Board: Asus P5B Deluxe
Graka: nvidia 8800 GTS
BIOS: puh....wüsste jetzt nicht wo ich nachschauen könnte - im Bios selsbt :confused:

bräuchtet ihr sonst noch was?
zeromancer1972
07.06.07, 20:28
Es ging nur darum zu erfahren, ob es ein altes oder neueres Board ist - sieht recht neu aus.
Wie äußert sich denn das "nicht runterfahren" können genau?
MATI
07.06.07, 20:32
Ok hab die BIOS Version: v02.58 bzw. 1004 stand beim Booten.

Ich klicke auf runterfahren und dann schaltet sich kde aus - der Bildschirm wird schwarz und dann passiert gar nichts. Er bleibt komplett schwarz.
zeromancer1972
07.06.07, 20:33
Und das versuchst du genau wie? Steht was in den kdm-Logs? Fehlermeldungen?

Wie MiGo schon sagte: poste bitte die Logs :)
Auch /var/log/messages

BTW: welche Distri?
MATI
07.06.07, 20:43
Entschuldigung habe die versionsnummer vergessen:
version ist Kubuntu 7.04

hier die messages:



Jun 7 21:37:44 Powerbaby kernel: [ 0.102580] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 7 10 11 12 14 15)
Jun 7 21:37:44 Powerbaby kernel: [ 0.102777] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12 14 15)
Jun 7 21:37:44 Powerbaby kernel: [ 0.102860] Linux Plug and Play Support v0.97 (c) Adam Belay
Jun 7 21:37:44 Powerbaby kernel: [ 0.102866] pnp: PnP ACPI init
Jun 7 21:37:44 Powerbaby kernel: [ 0.105492] pnp: PnP ACPI: found 16 devices
Jun 7 21:37:44 Powerbaby kernel: [ 0.105495] PnPBIOS: Disabled by ACPI PNP
Jun 7 21:37:44 Powerbaby kernel: [ 0.105523] PCI: Using ACPI for IRQ routing
Jun 7 21:37:44 Powerbaby kernel: [ 0.105525] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
Jun 7 21:37:44 Powerbaby kernel: [ 0.117674] NET: Registered protocol family 8
Jun 7 21:37:44 Powerbaby kernel: [ 0.117675] NET: Registered protocol family 20
Jun 7 21:37:44 Powerbaby kernel: [ 0.118202] pnp: 00:08: ioport range 0x290-0x297 has been reserved
Jun 7 21:37:44 Powerbaby kernel: [ 0.118407] PCI: Bridge: 0000:00:01.0
Jun 7 21:37:44 Powerbaby kernel: [ 0.118409] IO window: 8000-8fff
Jun 7 21:37:44 Powerbaby kernel: [ 0.118412] MEM window: c9700000-cf7fffff
Jun 7 21:37:44 Powerbaby kernel: [ 0.118414] PREFETCH window: a9500000-c94fffff
Jun 7 21:37:44 Powerbaby kernel: [ 0.118416] PCI: Bridge: 0000:00:1c.0
Jun 7 21:37:44 Powerbaby kernel: [ 0.118417] IO window: disabled.
Jun 7 21:37:44 Powerbaby kernel: [ 0.118421] MEM window: disabled.
Jun 7 21:37:44 Powerbaby kernel: [ 0.118423] PREFETCH window: c9500000-c95fffff
Jun 7 21:37:44 Powerbaby kernel: [ 0.118427] PCI: Bridge: 0000:00:1c.4
Jun 7 21:37:44 Powerbaby kernel: [ 0.118429] IO window: a000-afff
Jun 7 21:37:44 Powerbaby kernel: [ 0.118433] MEM window: cf900000-cf9fffff
Jun 7 21:37:44 Powerbaby kernel: [ 0.118435] PREFETCH window: disabled.
Jun 7 21:37:44 Powerbaby kernel: [ 0.118439] PCI: Bridge: 0000:00:1c.5
Jun 7 21:37:44 Powerbaby kernel: [ 0.118441] IO window: 9000-9fff
Jun 7 21:37:44 Powerbaby kernel: [ 0.118444] MEM window: cf800000-cf8fffff
Jun 7 21:37:44 Powerbaby kernel: [ 0.118447] PREFETCH window: disabled.
Jun 7 21:37:44 Powerbaby kernel: [ 0.118451] PCI: Bridge: 0000:00:1e.0
Jun 7 21:37:44 Powerbaby kernel: [ 0.118453] IO window: b000-bfff
Jun 7 21:37:44 Powerbaby kernel: [ 0.118456] MEM window: cfa00000-dfefffff
Jun 7 21:37:44 Powerbaby kernel: [ 0.118459] PREFETCH window: 88000000-880fffff
Jun 7 21:37:44 Powerbaby kernel: [ 0.118470] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
Jun 7 21:37:44 Powerbaby kernel: [ 0.118486] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16
Jun 7 21:37:44 Powerbaby kernel: [ 0.118502] ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 16 (level, low) -> IRQ 16
Jun 7 21:37:44 Powerbaby kernel: [ 0.118519] ACPI: PCI Interrupt 0000:00:1c.5[B] -> GSI 17 (level, low) -> IRQ 17
Jun 7 21:37:44 Powerbaby kernel: [ 0.118547] NET: Registered protocol family 2
Jun 7 21:37:44 Powerbaby kernel: [ 0.172056] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
Jun 7 21:37:44 Powerbaby kernel: [ 0.172142] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
Jun 7 21:37:44 Powerbaby kernel: [ 0.172540] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
Jun 7 21:37:44 Powerbaby kernel: [ 0.172682] TCP: Hash tables configured (established 131072 bind 65536)
Jun 7 21:37:44 Powerbaby kernel: [ 0.172684] TCP reno registered
Jun 7 21:37:44 Powerbaby kernel: [ 0.188195] checking if image is initramfs... it is
Jun 7 21:37:44 Powerbaby kernel: [ 0.632641] Freeing initrd memory: 6992k freed
Jun 7 21:37:44 Powerbaby kernel: [ 0.633066] audit: initializing netlink socket (disabled)
Jun 7 21:37:44 Powerbaby kernel: [ 0.633077] audit(1181252232.284:1): initialized
Jun 7 21:37:44 Powerbaby kernel: [ 0.633140] highmem bounce pool size: 64 pages
Jun 7 21:37:44 Powerbaby kernel: [ 0.633195] VFS: Disk quotas dquot_6.5.1
Jun 7 21:37:44 Powerbaby kernel: [ 0.633207] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Jun 7 21:37:44 Powerbaby kernel: [ 0.633240] io scheduler noop registered
Jun 7 21:37:44 Powerbaby kernel: [ 0.633242] io scheduler anticipatory registered
Jun 7 21:37:44 Powerbaby kernel: [ 0.633243] io scheduler deadline registered
Jun 7 21:37:44 Powerbaby kernel: [ 0.633250] io scheduler cfq registered (default)
Jun 7 21:37:44 Powerbaby kernel: [ 0.633491] assign_interrupt_mode Found MSI capability
Jun 7 21:37:44 Powerbaby kernel: [ 0.633585] assign_interrupt_mode Found MSI capability
Jun 7 21:37:44 Powerbaby kernel: [ 0.633714] assign_interrupt_mode Found MSI capability
Jun 7 21:37:44 Powerbaby kernel: [ 0.633840] assign_interrupt_mode Found MSI capability
Jun 7 21:37:44 Powerbaby kernel: [ 0.633979] isapnp: Scanning for PnP cards...
Jun 7 21:37:44 Powerbaby kernel: [ 0.986253] isapnp: No Plug & Play device found
Jun 7 21:37:44 Powerbaby kernel: [ 1.000374] Real Time Clock Driver v1.12ac
Jun 7 21:37:44 Powerbaby kernel: [ 1.000499] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
Jun 7 21:37:44 Powerbaby kernel: [ 1.000595] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Jun 7 21:37:44 Powerbaby kernel: [ 1.000984] 00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Jun 7 21:37:44 Powerbaby kernel: [ 1.001157] mice: PS/2 mouse device common for all mice
Jun 7 21:37:44 Powerbaby kernel: [ 1.001531] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
Jun 7 21:37:44 Powerbaby kernel: [ 1.001631] input: Macintosh mouse button emulation as /class/input/input0
Jun 7 21:37:44 Powerbaby kernel: [ 1.001657] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
Jun 7 21:37:44 Powerbaby kernel: [ 1.001659] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Jun 7 21:37:44 Powerbaby kernel: [ 1.001808] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
Jun 7 21:37:44 Powerbaby kernel: [ 1.004416] serio: i8042 KBD port at 0x60,0x64 irq 1
Jun 7 21:37:44 Powerbaby kernel: [ 1.004419] serio: i8042 AUX port at 0x60,0x64 irq 12
Jun 7 21:37:44 Powerbaby kernel: [ 1.004482] EISA: Probing bus 0 at eisa.0
Jun 7 21:37:44 Powerbaby kernel: [ 1.004503] Cannot allocate resource for EISA slot 8
Jun 7 21:37:44 Powerbaby kernel: [ 1.004504] EISA: Detected 0 cards.
Jun 7 21:37:44 Powerbaby kernel: [ 1.026825] input: AT Translated Set 2 keyboard as /class/input/input1
Jun 7 21:37:44 Powerbaby kernel: [ 1.034514] TCP cubic registered
Jun 7 21:37:44 Powerbaby kernel: [ 1.034519] NET: Registered protocol family 1
Jun 7 21:37:44 Powerbaby kernel: [ 1.034534] Starting balanced_irq
Jun 7 21:37:44 Powerbaby kernel: [ 1.034539] Using IPI No-Shortcut mode
Jun 7 21:37:44 Powerbaby kernel: [ 1.034596] ACPI: (supports S0 S1 S3 S4 S5)
Jun 7 21:37:44 Powerbaby kernel: [ 1.034628] Magic number: 11:334:651
Jun 7 21:37:44 Powerbaby kernel: [ 1.034763] Freeing unused kernel memory: 328k freed
Jun 7 21:37:44 Powerbaby kernel: [ 1.038378] Time: tsc clocksource has been installed.
Jun 7 21:37:44 Powerbaby kernel: [ 2.210629] Capability LSM initialized
Jun 7 21:37:44 Powerbaby kernel: [ 2.256178] ACPI Exception (acpi_processor-0677): AE_NOT_FOUND, Processor Device is not present [20060707]
Jun 7 21:37:44 Powerbaby kernel: [ 2.256184] ACPI Exception (acpi_processor-0677): AE_NOT_FOUND, Processor Device is not present [20060707]
Jun 7 21:37:44 Powerbaby kernel: [ 2.505712] usbcore: registered new interface driver usbfs
Jun 7 21:37:44 Powerbaby kernel: [ 2.505728] usbcore: registered new interface driver hub
Jun 7 21:37:44 Powerbaby kernel: [ 2.561455] usbcore: registered new device driver usb
Jun 7 21:37:44 Powerbaby kernel: [ 2.562072] SCSI subsystem initialized
Jun 7 21:37:44 Powerbaby kernel: [ 2.566906] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
Jun 7 21:37:44 Powerbaby kernel: [ 2.566927] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 18
Jun 7 21:37:44 Powerbaby kernel: [ 2.566963] ata1: SATA max UDMA/133 cmd 0x0001ec00 ctl 0x0001e882 bmdma 0x0001e400 irq 18
Jun 7 21:37:44 Powerbaby kernel: [ 2.567677] ata2: SATA max UDMA/133 cmd 0x0001e800 ctl 0x0001e482 bmdma 0x0001e408 irq 18
Jun 7 21:37:44 Powerbaby kernel: [ 2.567686] scsi0 : ata_piix
Jun 7 21:37:44 Powerbaby kernel: [ 2.594254] USB Universal Host Controller Interface driver v3.0
Jun 7 21:37:44 Powerbaby kernel: [ 2.617369] Floppy drive(s): fd0 is 1.44M
Jun 7 21:37:44 Powerbaby kernel: [ 2.637368] FDC 0 is a post-1991 82077
Jun 7 21:37:44 Powerbaby kernel: [ 2.730803] ata1.00: ata_hpa_resize 1: sectors = 488397168, hpa_sectors = 488397168
Jun 7 21:37:44 Powerbaby kernel: [ 2.730806] ata1.00: ATA-7: SAMSUNG SP2504C, VT100-50, max UDMA7
Jun 7 21:37:44 Powerbaby kernel: [ 2.730808] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 0/32)
Jun 7 21:37:44 Powerbaby kernel: [ 2.771137] ata1.00: ata_hpa_resize 1: sectors = 488397168, hpa_sectors = 488397168
Jun 7 21:37:44 Powerbaby kernel: [ 2.771140] ata1.00: configured for UDMA/133
Jun 7 21:37:44 Powerbaby kernel: [ 2.771146] scsi1 : ata_piix
Jun 7 21:37:44 Powerbaby kernel: [ 2.934151] ATA: abnormal status 0x7F on port 0x0001e807
Jun 7 21:37:44 Powerbaby kernel: [ 2.934228] scsi 0:0:0:0: Direct-Access ATA SAMSUNG SP2504C VT10 PQ: 0 ANSI: 5
Jun 7 21:37:44 Powerbaby kernel: [ 2.935171] ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 19
Jun 7 21:37:44 Powerbaby kernel: [ 2.935183] ehci_hcd 0000:00:1a.7: EHCI Host Controller
Jun 7 21:37:44 Powerbaby kernel: [ 2.935251] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
Jun 7 21:37:44 Powerbaby kernel: [ 2.935273] ehci_hcd 0000:00:1a.7: debug port 1
Jun 7 21:37:44 Powerbaby kernel: [ 2.935284] ehci_hcd 0000:00:1a.7: irq 19, io mem 0xdffffc00
Jun 7 21:37:44 Powerbaby kernel: [ 2.939156] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
Jun 7 21:37:44 Powerbaby kernel: [ 2.939216] usb usb1: configuration #1 chosen from 1 choice
Jun 7 21:37:44 Powerbaby kernel: [ 2.939233] hub 1-0:1.0: USB hub found
Jun 7 21:37:44 Powerbaby kernel: [ 2.939237] hub 1-0:1.0: 4 ports detected
Jun 7 21:37:44 Powerbaby kernel: [ 3.040110] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 20
Jun 7 21:37:44 Powerbaby kernel: [ 3.040122] ehci_hcd 0000:00:1d.7: EHCI Host Controller
Jun 7 21:37:44 Powerbaby kernel: [ 3.040145] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
Jun 7 21:37:44 Powerbaby kernel: [ 3.040169] ehci_hcd 0000:00:1d.7: debug port 1
Jun 7 21:37:44 Powerbaby kernel: [ 3.040182] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xdffff800
Jun 7 21:37:44 Powerbaby kernel: [ 3.044068] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
Jun 7 21:37:44 Powerbaby kernel: [ 3.044113] usb usb2: configuration #1 chosen from 1 choice
Jun 7 21:37:44 Powerbaby kernel: [ 3.044130] hub 2-0:1.0: USB hub found
Jun 7 21:37:44 Powerbaby kernel: [ 3.044134] hub 2-0:1.0: 6 ports detected
Jun 7 21:37:44 Powerbaby kernel: [ 3.149172] ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 16
Jun 7 21:37:44 Powerbaby kernel: [ 3.149181] uhci_hcd 0000:00:1a.0: UHCI Host Controller
Jun 7 21:37:44 Powerbaby kernel: [ 3.149198] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
Jun 7 21:37:44 Powerbaby kernel: [ 3.149219] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000dc00
Jun 7 21:37:44 Powerbaby kernel: [ 3.149278] usb usb3: configuration #1 chosen from 1 choice
Jun 7 21:37:44 Powerbaby kernel: [ 3.149293] hub 3-0:1.0: USB hub found
Jun 7 21:37:44 Powerbaby kernel: [ 3.149297] hub 3-0:1.0: 2 ports detected
Jun 7 21:37:44 Powerbaby kernel: [ 3.253775] ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 17 (level, low) -> IRQ 17
Jun 7 21:37:44 Powerbaby kernel: [ 3.253787] uhci_hcd 0000:00:1a.1: UHCI Host Controller
Jun 7 21:37:44 Powerbaby kernel: [ 3.253807] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
Jun 7 21:37:44 Powerbaby kernel: [ 3.253831] uhci_hcd 0000:00:1a.1: irq 17, io base 0x0000e000
Jun 7 21:37:44 Powerbaby kernel: [ 3.253908] usb usb4: configuration #1 chosen from 1 choice
Jun 7 21:37:44 Powerbaby kernel: [ 3.253934] hub 4-0:1.0: USB hub found
Jun 7 21:37:44 Powerbaby kernel: [ 3.253940] hub 4-0:1.0: 2 ports detected
Jun 7 21:37:44 Powerbaby kernel: [ 3.358490] ata_piix 0000:00:1f.5: MAP [ P0 P2 P1 P3 ]
Jun 7 21:37:44 Powerbaby kernel: [ 3.358508] ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 19 (level, low) -> IRQ 18
Jun 7 21:37:44 Powerbaby kernel: [ 3.358547] ata3: SATA max UDMA/133 cmd 0x0001d400 ctl 0x0001d082 bmdma 0x0001c880 irq 18
Jun 7 21:37:44 Powerbaby kernel: [ 3.358573] ata4: SATA max UDMA/133 cmd 0x0001d000 ctl 0x0001cc02 bmdma 0x0001c888 irq 18
Jun 7 21:37:44 Powerbaby kernel: [ 3.358579] scsi2 : ata_piix
Jun 7 21:37:44 Powerbaby kernel: [ 3.390525] usb 2-1: new high speed USB device using ehci_hcd and address 2
Jun 7 21:37:44 Powerbaby kernel: [ 3.521519] ATA: abnormal status 0x7F on port 0x0001d407
Jun 7 21:37:44 Powerbaby kernel: [ 3.521526] scsi3 : ata_piix
Jun 7 21:37:44 Powerbaby kernel: [ 3.523055] usb 2-1: configuration #1 chosen from 1 choice
Jun 7 21:37:44 Powerbaby kernel: [ 3.686752] ATA: abnormal status 0x7F on port 0x0001d007
Jun 7 21:37:44 Powerbaby kernel: [ 3.688724] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 16 (level, low) -> IRQ 16
Jun 7 21:37:44 Powerbaby kernel: [ 4.690727] ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
Jun 7 21:37:44 Powerbaby kernel: [ 4.690730] ahci 0000:03:00.0: flags: 64bit ncq pm led clo pmp pio slum part
Jun 7 21:37:44 Powerbaby kernel: [ 4.690792] ata5: SATA max UDMA/133 cmd 0xf8918100 ctl 0x00000000 bmdma 0x00000000 irq 16
Jun 7 21:37:44 Powerbaby kernel: [ 4.690848] ata6: SATA max UDMA/133 cmd 0xf8918180 ctl 0x00000000 bmdma 0x00000000 irq 16
Jun 7 21:37:44 Powerbaby kernel: [ 4.690854] scsi4 : ahci
Jun 7 21:37:44 Powerbaby kernel: [ 5.000532] ata5: SATA link down (SStatus 0 SControl 300)
Jun 7 21:37:44 Powerbaby kernel: [ 5.000545] scsi5 : ahci
Jun 7 21:37:44 Powerbaby kernel: [ 5.315005] ata6: SATA link down (SStatus 0 SControl 300)
Jun 7 21:37:44 Powerbaby kernel: [ 5.315345] PCI: Enabling device 0000:03:00.1 (0000 -> 0001)
Jun 7 21:37:44 Powerbaby kernel: [ 5.315350] ACPI: PCI Interrupt 0000:03:00.1[B] -> GSI 17 (level, low) -> IRQ 17
Jun 7 21:37:44 Powerbaby kernel: [ 5.315384] ata7: PATA max UDMA/100 cmd 0x0001ac00 ctl 0x0001a882 bmdma 0x0001a400 irq 17
Jun 7 21:37:44 Powerbaby kernel: [ 5.315403] ata8: PATA max UDMA/100 cmd 0x0001a800 ctl 0x0001a482 bmdma 0x0001a408 irq 17
Jun 7 21:37:44 Powerbaby kernel: [ 5.315411] scsi6 : pata_jmicron
Jun 7 21:37:44 Powerbaby kernel: [ 5.798653] ata7.00: ATAPI, max UDMA/66
Jun 7 21:37:44 Powerbaby kernel: [ 5.798655] ata7.01: ATAPI, max UDMA/33
Jun 7 21:37:44 Powerbaby kernel: [ 5.963382] ata7.00: configured for UDMA/66
Jun 7 21:37:44 Powerbaby kernel: [ 6.128472] ata7.01: configured for UDMA/33
Jun 7 21:37:44 Powerbaby kernel: [ 6.128477] scsi7 : pata_jmicron
Jun 7 21:37:44 Powerbaby kernel: [ 6.296621] ATA: abnormal status 0x7F on port 0x0001a807
Jun 7 21:37:44 Powerbaby kernel: [ 6.302521] scsi 6:0:0:0: CD-ROM PIONEER DVD-RW DVR-112 1.09 PQ: 0 ANSI: 5
Jun 7 21:37:44 Powerbaby kernel: [ 6.306142] scsi 6:0:1:0: CD-ROM HL-DT-ST DVD-ROM GDR8164B 0L06 PQ: 0 ANSI: 5
Jun 7 21:37:44 Powerbaby kernel: [ 6.306883] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 20
Jun 7 21:37:44 Powerbaby kernel: [ 6.306891] uhci_hcd 0000:00:1d.0: UHCI Host Controller
Jun 7 21:37:44 Powerbaby kernel: [ 6.306979] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
Jun 7 21:37:44 Powerbaby kernel: [ 6.306998] uhci_hcd 0000:00:1d.0: irq 20, io base 0x0000d480
Jun 7 21:37:44 Powerbaby kernel: [ 6.307585] usb usb5: configuration #1 chosen from 1 choice
Jun 7 21:37:44 Powerbaby kernel: [ 6.307677] hub 5-0:1.0: USB hub found
Jun 7 21:37:44 Powerbaby kernel: [ 6.307681] hub 5-0:1.0: 2 ports detected
Jun 7 21:37:44 Powerbaby kernel: [ 6.414583] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 18
Jun 7 21:37:44 Powerbaby kernel: [ 6.414592] uhci_hcd 0000:00:1d.1: UHCI Host Controller
Jun 7 21:37:44 Powerbaby kernel: [ 6.414679] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
Jun 7 21:37:44 Powerbaby kernel: [ 6.414698] uhci_hcd 0000:00:1d.1: irq 18, io base 0x0000d800
Jun 7 21:37:44 Powerbaby kernel: [ 6.414994] usb usb6: configuration #1 chosen from 1 choice
Jun 7 21:37:44 Powerbaby kernel: [ 6.415101] hub 6-0:1.0: USB hub found
Jun 7 21:37:44 Powerbaby kernel: [ 6.415105] hub 6-0:1.0: 2 ports detected
Jun 7 21:37:44 Powerbaby kernel: [ 6.518703] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 19
Jun 7 21:37:44 Powerbaby kernel: [ 6.518711] uhci_hcd 0000:00:1d.2: UHCI Host Controller
Jun 7 21:37:44 Powerbaby kernel: [ 6.518800] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
Jun 7 21:37:44 Powerbaby kernel: [ 6.518818] uhci_hcd 0000:00:1d.2: irq 19, io base 0x0000d880
Jun 7 21:37:44 Powerbaby kernel: [ 6.519123] usb usb7: configuration #1 chosen from 1 choice
Jun 7 21:37:44 Powerbaby kernel: [ 6.519228] hub 7-0:1.0: USB hub found
Jun 7 21:37:44 Powerbaby kernel: [ 6.519233] hub 7-0:1.0: 2 ports detected
Jun 7 21:37:44 Powerbaby kernel: [ 6.623587] ACPI: PCI Interrupt 0000:05:04.0[A] -> GSI 19 (level, low) -> IRQ 18
Jun 7 21:37:44 Powerbaby kernel: [ 6.623616] skge 1.9 addr 0xdfef4000 irq 18 chip Yukon-Lite rev 9
Jun 7 21:37:44 Powerbaby kernel: [ 6.623694] skge eth0: addr 00:1a:92:7c:d0:4c
Jun 7 21:37:44 Powerbaby kernel: [ 6.624558] ACPI: PCI Interrupt 0000:05:03.0[A] -> GSI 21 (level, low) -> IRQ 21
Jun 7 21:37:44 Powerbaby kernel: [ 6.674238] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[21] MMIO=[dfeff800-dfefffff] Max Packet=[2048] IR/IT contexts=[4/8]
Jun 7 21:37:44 Powerbaby kernel: [ 6.679593] SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB)
Jun 7 21:37:44 Powerbaby kernel: [ 6.679601] sda: Write Protect is off
Jun 7 21:37:44 Powerbaby kernel: [ 6.679612] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Jun 7 21:37:44 Powerbaby kernel: [ 6.679641] SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB)
Jun 7 21:37:44 Powerbaby kernel: [ 6.679647] sda: Write Protect is off
Jun 7 21:37:44 Powerbaby kernel: [ 6.679658] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Jun 7 21:37:44 Powerbaby kernel: [ 6.679660] sda: sda1 sda2 < sda5 sda6sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
Jun 7 21:37:44 Powerbaby kernel: [ 6.720697] Uniform CD-ROM driver Revision: 3.20
Jun 7 21:37:44 Powerbaby kernel: [ 6.722730] sda7sr1: scsi3-mmc drive: 52x/52x cd/rw xa/form2 cdda tray
Jun 7 21:37:44 Powerbaby kernel: [ 6.735399] sd 0:0:0:0: Attached scsi generic sg0 type 0
Jun 7 21:37:44 Powerbaby kernel: [ 6.735471] sr 6:0:0:0: Attached scsi generic sg1 type 5
Jun 7 21:37:44 Powerbaby kernel: [ 6.735543] sr 6:0:1:0: Attached scsi generic sg2 type 5
Jun 7 21:37:44 Powerbaby kernel: [ 6.738579] sda8 sda9 sda10 sda11 sda12 sda13 sda14 sda15 >
Jun 7 21:37:44 Powerbaby kernel: [ 6.815704] sd 0:0:0:0: Attached scsi disk sda
Jun 7 21:37:44 Powerbaby kernel: [ 7.196126] Attempting manual resume
Jun 7 21:37:44 Powerbaby kernel: [ 7.202491] EXT3-fs: INFO: recovery required on readonly filesystem.
Jun 7 21:37:44 Powerbaby kernel: [ 7.202494] EXT3-fs: write access will be enabled during recovery.
Jun 7 21:37:44 Powerbaby kernel: [ 8.403247] kjournald starting. Commit interval 5 seconds
Jun 7 21:37:44 Powerbaby kernel: [ 8.403258] EXT3-fs: recovery complete.
Jun 7 21:37:44 Powerbaby kernel: [ 8.409650] EXT3-fs: mounted filesystem with ordered data mode.
Jun 7 21:37:44 Powerbaby kernel: [ 15.298498] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
Jun 7 21:37:44 Powerbaby kernel: [ 15.300486] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
Jun 7 21:37:44 Powerbaby kernel: [ 15.323906] Linux agpgart interface v0.102 (c) Dave Jones
Jun 7 21:37:44 Powerbaby kernel: [ 15.325606] agpgart: Detected an Intel 965G Chipset.
Jun 7 21:37:44 Powerbaby kernel: [ 15.337575] agpgart: AGP aperture is 256M @ 0x0
Jun 7 21:37:44 Powerbaby kernel: [ 15.359987] iTCO_vendor_support: vendor-support=0
Jun 7 21:37:44 Powerbaby kernel: [ 15.360668] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (11-Nov-2006)
Jun 7 21:37:44 Powerbaby kernel: [ 15.432574] logips2pp: Detected unknown logitech mouse model 62
Jun 7 21:37:44 Powerbaby kernel: [ 15.618053] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 17 (level, low) -> IRQ 17
Jun 7 21:37:44 Powerbaby kernel: [ 15.618083] sky2 0000:02:00.0: v1.13 addr 0xcf8fc000 irq 17 Yukon-EC Ultra (0xb4) rev 2
Jun 7 21:37:44 Powerbaby kernel: [ 15.618169] sky2 eth1: addr 00:1a:92:7c:d7:ef
Jun 7 21:37:44 Powerbaby kernel: [ 15.691163] Linux video capture interface: v2.00
Jun 7 21:37:44 Powerbaby kernel: [ 15.861559] cx2388x v4l2 driver version 0.0.6 loaded
Jun 7 21:37:44 Powerbaby kernel: [ 15.861606] ACPI: PCI Interrupt 0000:05:01.0[A] -> GSI 22 (level, low) -> IRQ 22
Jun 7 21:37:44 Powerbaby kernel: [ 15.861628] CORE cx88[0]: subsystem: 0070:9402, board: Hauppauge WinTV-HVR1100 DVB-T/Hybrid [card=40,autodetected]
Jun 7 21:37:44 Powerbaby kernel: [ 15.861631] TV tuner 63 at 0x1fe, Radio tuner -1 at 0x1fe
Jun 7 21:37:44 Powerbaby kernel: [ 15.864846] cx2388x cx88-mpeg Driver Manager version 0.0.6 loaded
Jun 7 21:37:44 Powerbaby kernel: [ 15.935739] p54: LM86 firmware
Jun 7 21:37:44 Powerbaby kernel: [ 15.938327] input: ImExPS/2 Logitech Explorer Mouse as /class/input/input2
Jun 7 21:37:44 Powerbaby kernel: [ 15.941646] iTCO_wdt: Found a ICH8 or ICH8R TCO device (Version=2, TCOBASE=0x0860)
Jun 7 21:37:44 Powerbaby kernel: [ 15.941672] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
Jun 7 21:37:44 Powerbaby kernel: [ 15.954115] input: PC Speaker as /class/input/input3
Jun 7 21:37:44 Powerbaby kernel: [ 15.955446] cx2388x alsa driver version 0.0.6 loaded
Jun 7 21:37:44 Powerbaby kernel: [ 16.023724] tveeprom 0-0050: Hauppauge model 94009, rev C2A0, serial# 130014
Jun 7 21:37:44 Powerbaby kernel: [ 16.023727] tveeprom 0-0050: MAC address is 00-0D-FE-01-FB-DE
Jun 7 21:37:44 Powerbaby kernel: [ 16.023729] tveeprom 0-0050: tuner model is Philips FMD1216ME (idx 100, type 63)
Jun 7 21:37:44 Powerbaby kernel: [ 16.023731] tveeprom 0-0050: TV standards PAL(B/G) PAL(I) SECAM(L/L') PAL(D/D1/K) ATSC/DVB Digital (eeprom 0xf4)
Jun 7 21:37:44 Powerbaby kernel: [ 16.023733] tveeprom 0-0050: audio processor is CX882 (idx 33)
Jun 7 21:37:44 Powerbaby kernel: [ 16.023734] tveeprom 0-0050: decoder processor is CX882 (idx 25)
Jun 7 21:37:44 Powerbaby kernel: [ 16.023736] tveeprom 0-0050: has radio, has IR receiver, has no IR transmitter
Jun 7 21:37:44 Powerbaby kernel: [ 16.023738] cx88[0]: hauppauge eeprom: model=94009
Jun 7 21:37:44 Powerbaby kernel: [ 16.023792] input: cx88 IR (Hauppauge WinTV-HVR110 as /class/input/input4
Jun 7 21:37:44 Powerbaby kernel: [ 16.023817] cx88[0]/0: found at 0000:05:01.0, rev: 5, irq: 22, latency: 64, mmio: 0xdb000000
Jun 7 21:37:44 Powerbaby kernel: [ 16.049918] tuner 0-0043: chip found @ 0x86 (cx88[0])
Jun 7 21:37:44 Powerbaby kernel: [ 16.049941] tda9887 0-0043: tda988[5/6/7] found @ 0x43 (tuner)
Jun 7 21:37:44 Powerbaby kernel: [ 16.053049] tuner 0-0061: chip found @ 0xc2 (cx88[0])
Jun 7 21:37:44 Powerbaby kernel: [ 16.056081] tuner 0-0061: type set to 63 (Philips FMD1216ME MK3 Hybrid Tuner)
Jun 7 21:37:44 Powerbaby kernel: [ 16.059099] tuner 0-0061: type set to 63 (Philips FMD1216ME MK3 Hybrid Tuner)
Jun 7 21:37:44 Powerbaby kernel: [ 16.060290] tuner 0-0063: chip found @ 0xc6 (cx88[0])
Jun 7 21:37:44 Powerbaby kernel: [ 16.071875] cx88[0]/0: registered device video0 [v4l2]
Jun 7 21:37:44 Powerbaby kernel: [ 16.071896] cx88[0]/0: registered device vbi0
Jun 7 21:37:44 Powerbaby kernel: [ 16.071919] cx88[0]/0: registered device radio0
Jun 7 21:37:44 Powerbaby kernel: [ 16.074068] cx88[0]/2: cx2388x 8802 Driver Manager
Jun 7 21:37:44 Powerbaby kernel: [ 16.074085] ACPI: PCI Interrupt 0000:00:1b.0[A] -> <6>ACPI: PCI Interrupt 0000:05:01.2[A] -> GSI 22 (level, low) -> IRQ 22
Jun 7 21:37:44 Powerbaby kernel: [ 16.074090] GSI 22 (level, low) -> IRQ 22
Jun 7 21:37:44 Powerbaby kernel: [ 16.074095] cx88[0]/2: found at 0000:05:01.2, rev: 5, irq: 22, latency: 64, mmio: 0xdd000000
Jun 7 21:37:44 Powerbaby kernel: [ 16.455172] ACPI: PCI Interrupt 0000:05:01.1[A] -> GSI 22 (level, low) -> IRQ 22
Jun 7 21:37:44 Powerbaby kernel: [ 16.455197] cx88[0]/1: CX88x/0: ALSA support for cx2388x boards
Jun 7 21:37:44 Powerbaby kernel: [ 16.935011] prism54usb: probe of 2-1:1.0 failed with error -110
Jun 7 21:37:44 Powerbaby kernel: [ 16.935023] usbcore: registered new interface driver prism54usb
Jun 7 21:37:44 Powerbaby kernel: [ 17.041624] fuse init (API version 7.8)
Jun 7 21:37:44 Powerbaby kernel: [ 17.094963] lp: driver loaded but no devices found
Jun 7 21:37:44 Powerbaby kernel: [ 17.127514] Adding 4192924k swap on /dev/disk/by-uuid/a97e6234-a3a7-42d4-b6f8-ef03bc775833. Priority:-1 extents:1 across:4192924k
Jun 7 21:37:44 Powerbaby kernel: [ 17.420384] EXT3 FS on sda14, internal journal
Jun 7 21:37:44 Powerbaby kernel: [ 25.514646] NTFS driver 2.1.28 [Flags: R/O MODULE].
Jun 7 21:37:44 Powerbaby kernel: [ 25.570777] NTFS volume version 3.1.
Jun 7 21:37:44 Powerbaby kernel: [ 25.937198] ndiswrapper version 1.38 loaded (preempt=no,smp=yes)
Jun 7 21:37:44 Powerbaby kernel: [ 26.177900] usb 2-1: reset high speed USB device using ehci_hcd and address 2
Jun 7 21:37:44 Powerbaby kernel: [ 26.323230] ndiswrapper: driver se4501d (Siemens AG,06/07/2004, 3.0.18.3) loaded
Jun 7 21:37:44 Powerbaby kernel: [ 27.723224] wlan0: ethernet device 00:30:f1:dd:9b:8e using NDIS driver: se4501d, version: 0x30012, NDIS version: 0x501, vendor: 'Gigaset USB Adapter 54', 083A:4521.F.conf
Jun 7 21:37:44 Powerbaby kernel: [ 27.723248] wlan0: encryption modes supported: WEP; TKIP with WPA; AES/CCMP with WPA
Jun 7 21:37:44 Powerbaby kernel: [ 27.723283] usbcore: registered new interface driver ndiswrapper
Jun 7 21:37:44 Powerbaby kernel: [ 28.837686] NET: Registered protocol family 17
Jun 7 21:37:44 Powerbaby kernel: [ 32.519802] NET: Registered protocol family 10
Jun 7 21:37:44 Powerbaby kernel: [ 32.519866] lo: Disabled Privacy Extensions
Jun 7 21:37:44 Powerbaby kernel: [ 32.786493] Using specific hotkey driver
Jun 7 21:37:44 Powerbaby kernel: [ 32.848001] input: Power Button (FF) as /class/input/input5
Jun 7 21:37:44 Powerbaby kernel: [ 32.848017] ACPI: Power Button (FF) [PWRF]
Jun 7 21:37:44 Powerbaby kernel: [ 32.848062] input: Power Button (CM) as /class/input/input6
Jun 7 21:37:44 Powerbaby kernel: [ 32.848073] ACPI: Power Button (CM) [PWRB]
Jun 7 21:37:44 Powerbaby kernel: [ 32.912880] No dock devices found.
Jun 7 21:37:44 Powerbaby kernel: [ 32.919457] pcc_acpi: loading...
Jun 7 21:37:48 Powerbaby dhcdbd: Started up.
Jun 7 21:37:48 Powerbaby kernel: [ 36.734704] sky2 eth1: enabling interface
Jun 7 21:37:48 Powerbaby kernel: [ 36.736929] sky2 eth1: ram buffer 0K
Jun 7 21:37:48 Powerbaby kernel: [ 36.737038] ADDRCONF(NETDEV_UP): eth1: link is not ready
Jun 7 21:37:48 Powerbaby kernel: [ 36.805604] skge eth0: enabling interface
Jun 7 21:37:48 Powerbaby kernel: [ 36.808688] ADDRCONF(NETDEV_UP): eth0: link is not ready
Jun 7 21:37:48 Powerbaby kernel: [ 36.923952] ppdev: user-space parallel port driver
Jun 7 21:37:48 Powerbaby hpiod: 1.7.3 accepting connections at 2208...
Jun 7 21:37:49 Powerbaby kernel: [ 37.684003] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
Jun 7 21:37:49 Powerbaby kernel: [ 37.684006] apm: disabled - APM is not SMP safe.
Jun 7 21:37:49 Powerbaby kernel: [ 38.119478] Bluetooth: Core ver 2.11
Jun 7 21:37:49 Powerbaby kernel: [ 38.119517] NET: Registered protocol family 31
Jun 7 21:37:49 Powerbaby kernel: [ 38.119518] Bluetooth: HCI device and connection manager initialized
Jun 7 21:37:49 Powerbaby kernel: [ 38.119520] Bluetooth: HCI socket layer initialized
Jun 7 21:37:49 Powerbaby kernel: [ 38.124135] Bluetooth: L2CAP ver 2.8
Jun 7 21:37:49 Powerbaby kernel: [ 38.124138] Bluetooth: L2CAP socket layer initialized
Jun 7 21:37:49 Powerbaby kernel: [ 38.335242] Bluetooth: RFCOMM socket layer initialized
Jun 7 21:37:49 Powerbaby kernel: [ 38.335249] Bluetooth: RFCOMM TTY layer initialized
Jun 7 21:37:49 Powerbaby kernel: [ 38.335250] Bluetooth: RFCOMM ver 1.8
zeromancer1972
07.06.07, 20:54
Die KDE-Logs wie MiGo saget auch bitte. Da ich KDE nicht nutze, steige ich hier mal aus - MiGo sagt Dir sicher, welche er meint ;)
MATI
08.06.07, 11:29
wo find ihc die denn :rolleyes:
MiGo
08.06.07, 18:22
in /var/log/kdm.log
MATI
08.06.07, 18:57
SetClientVersion: 0 9
SetClientVersion: 0 9

X Window System Version 7.2.0
Release Date: 22 January 2007
X Protocol Version 11, Revision 0, Release 7.2
Build Operating System: Linux Ubuntu
Current Operating System: Linux Powerbaby 2.6.20-15-generic #2 SMP Sun Apr 15 07:36:31 UTC 2007 i686
Build Date: 04 April 2007
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Fri Jun 8 12:33:23 2007
(==) Using config file: "/etc/X11/xorg.conf"
(EE) Failed to initialize GLX extension (Compatible NVIDIA X driver not found)
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning: Type "ONE_LEVEL" has 1 levels, but <RALT> has 2 symbols
> Ignoring extra symbols
Errors from xkbcomp are not fatal to the X server
(EE) xf86OpenSerial: Cannot open device /dev/input/wacom
No such file or directory.
Error opening /dev/input/wacom : Success
(EE) xf86OpenSerial: Cannot open device /dev/input/wacom
No such file or directory.
Error opening /dev/input/wacom : Success
(EE) xf86OpenSerial: Cannot open device /dev/input/wacom
No such file or directory.
Error opening /dev/input/wacom : Success
Could not init font path element /usr/X11R6/lib/X11/fonts/misc, removing from list!
Could not init font path element /usr/share/fonts/X11/cyrillic, removing from list!
Could not init font path element /usr/X11R6/lib/X11/fonts/Type1, removing from list!
X Error: BadDevice, invalid or uninitialized input device 154
Major opcode: 143
Minor opcode: 3
Resource id: 0x0
Failed to open device
X Error: BadDevice, invalid or uninitialized input device 154
Major opcode: 143
Minor opcode: 3
Resource id: 0x0
Failed to open device
QImage::convertDepth: Image is a null image
QImage::smoothScale: Image is a null image
X Error: BadDevice, invalid or uninitialized input device 154
Major opcode: 143
Minor opcode: 3
Resource id: 0x0
Failed to open device
X Error: BadDevice, invalid or uninitialized input device 154
Major opcode: 143
Minor opcode: 3
Resource id: 0x0
Failed to open device
SetClientVersion: 0 9
SetClientVersion: 0 9
SetClientVersion: 0 9
SetClientVersion: 0 9

X Window System Version 7.2.0
Release Date: 22 January 2007
X Protocol Version 11, Revision 0, Release 7.2
Build Operating System: Linux Ubuntu
Current Operating System: Linux Powerbaby 2.6.20-15-generic #2 SMP Sun Apr 15 07:36:31 UTC 2007 i686
Build Date: 04 April 2007
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Fri Jun 8 13:25:40 2007
(==) Using config file: "/etc/X11/xorg.conf"
NVIDIA: could not open the device file /dev/nvidia0 (Input/output error).
(EE) NVIDIA(0): Failed to initialize the NVIDIA graphics device PCI:1:0:0.
(EE) NVIDIA(0): Please see the COMMON PROBLEMS section in the README for
(EE) NVIDIA(0): additional information.
(EE) NVIDIA(0): Failed to initialize the NVIDIA graphics device!
(EE) NVIDIA(0): *** Aborting ***
(EE) Screen(s) found, but none have a usable configuration.

Fatal server error:
no screens found

X Window System Version 7.2.0
Release Date: 22 January 2007
X Protocol Version 11, Revision 0, Release 7.2
Build Operating System: Linux Ubuntu
Current Operating System: Linux Powerbaby 2.6.20-15-generic #2 SMP Sun Apr 15 07:36:31 UTC 2007 i686
Build Date: 04 April 2007
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Fri Jun 8 13:27:30 2007
(==) Using config file: "/etc/X11/xorg.conf"
NVIDIA: could not open the device file /dev/nvidia0 (Input/output error).
(EE) NVIDIA(0): Failed to initialize the NVIDIA graphics device PCI:1:0:0.
(EE) NVIDIA(0): Please see the COMMON PROBLEMS section in the README for
(EE) NVIDIA(0): additional information.
(EE) NVIDIA(0): Failed to initialize the NVIDIA graphics device!
(EE) NVIDIA(0): *** Aborting ***
(EE) Screen(s) found, but none have a usable configuration.
Fatal server error:
no screens found

X Window System Version 7.2.0
Release Date: 22 January 2007
X Protocol Version 11, Revision 0, Release 7.2
Build Operating System: Linux Ubuntu
Current Operating System: Linux Powerbaby 2.6.20-15-generic #2 SMP Sun Apr 15 07:36:31 UTC 2007 i686
Build Date: 04 April 2007
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Fri Jun 8 13:47:12 2007
(==) Using config file: "/etc/X11/xorg.conf"
NVIDIA: could not open the device file /dev/nvidia0 (Input/output error).
(EE) NVIDIA(0): Failed to initialize the NVIDIA graphics device PCI:1:0:0.
(EE) NVIDIA(0): Please see the COMMON PROBLEMS section in the README for
(EE) NVIDIA(0): additional information.
(EE) NVIDIA(0): Failed to initialize the NVIDIA graphics device!
(EE) NVIDIA(0): *** Aborting ***
(EE) Screen(s) found, but none have a usable configuration.

Fatal server error:
no screens found

X Window System Version 7.2.0
Release Date: 22 January 2007
X Protocol Version 11, Revision 0, Release 7.2
Build Operating System: Linux Ubuntu
Current Operating System: Linux Powerbaby 2.6.20-15-generic #2 SMP Sun Apr 15 07:36:31 UTC 2007 i686
Build Date: 04 April 2007
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Fri Jun 8 13:55:24 2007
(==) Using config file: "/etc/X11/xorg.conf"
NVIDIA: could not open the device file /dev/nvidia0 (Input/output error).
(EE) NVIDIA(0): Failed to initialize the NVIDIA graphics device PCI:1:0:0.
(EE) NVIDIA(0): Please see the COMMON PROBLEMS section in the README for
(EE) NVIDIA(0): additional information.
(EE) NVIDIA(0): Failed to initialize the NVIDIA graphics device!
(EE) NVIDIA(0): *** Aborting ***
(EE) Screen(s) found, but none have a usable configuration.

Fatal server error:
no screens found
X Window System Version 7.2.0
Release Date: 22 January 2007
X Protocol Version 11, Revision 0, Release 7.2
Build Operating System: Linux Ubuntu
Current Operating System: Linux Powerbaby 2.6.20-15-generic #2 SMP Sun Apr 15 07:36:31 UTC 2007 i686
Build Date: 04 April 2007
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Fri Jun 8 18:40:52 2007
(==) Using config file: "/etc/X11/xorg.conf"
NVIDIA: could not open the device file /dev/nvidia0 (Input/output error).
(EE) NVIDIA(0): Failed to initialize the NVIDIA graphics device PCI:1:0:0.
(EE) NVIDIA(0): Please see the COMMON PROBLEMS section in the README for
(EE) NVIDIA(0): additional information.
(EE) NVIDIA(0): Failed to initialize the NVIDIA graphics device!
(EE) NVIDIA(0): *** Aborting ***
(EE) Screen(s) found, but none have a usable configuration.

Fatal server error:
no screens found

X Window System Version 7.2.0
Release Date: 22 January 2007
X Protocol Version 11, Revision 0, Release 7.2
Build Operating System: Linux Ubuntu
Current Operating System: Linux Powerbaby 2.6.20-15-generic #2 SMP Sun Apr 15 07:36:31 UTC 2007 i686
Build Date: 04 April 2007
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Fri Jun 8 18:46:09 2007
(==) Using config file: "/etc/X11/xorg.conf"
Error: API mismatch: the NVIDIA kernel module has the version 1.0-9755, but
this X module has the version 1.0-9631. Please make sure that the kernel
module and all NVIDIA driver components have the same version.
(EE) NVIDIA(0): Failed to initialize the NVIDIA kernel module! Please ensure
(EE) NVIDIA(0): that there is a supported NVIDIA GPU in this system, and
(EE) NVIDIA(0): that the NVIDIA device files have been created properly.
(EE) NVIDIA(0): Please consult the NVIDIA README for details.
(EE) NVIDIA(0): *** Aborting ***
(EE) Screen(s) found, but none have a usable configuration.

Fatal server error:
no screens found

X Window System Version 7.2.0
Release Date: 22 January 2007
X Protocol Version 11, Revision 0, Release 7.2
Build Operating System: Linux Ubuntu
Current Operating System: Linux Powerbaby 2.6.20-15-generic #2 SMP Sun Apr 15 07:36:31 UTC 2007 i686
Build Date: 04 April 2007
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Fri Jun 8 19:20:46 2007
(==) Using config file: "/etc/X11/xorg.conf"
Error: API mismatch: the NVIDIA kernel module has the version 1.0-9755, but
this X module has the version 1.0-9631. Please make sure that the kernel
module and all NVIDIA driver components have the same version.
(EE) NVIDIA(0): Failed to initialize the NVIDIA kernel module! Please ensure
(EE) NVIDIA(0): that there is a supported NVIDIA GPU in this system, and
(EE) NVIDIA(0): that the NVIDIA device files have been created properly.
(EE) NVIDIA(0): Please consult the NVIDIA README for details.
(EE) NVIDIA(0): *** Aborting ***
(EE) Screen(s) found, but none have a usable configuration.

Fatal server error:
no screens found

X Window System Version 7.2.0
Release Date: 22 January 2007
X Protocol Version 11, Revision 0, Release 7.2
Build Operating System: Linux Ubuntu
Current Operating System: Linux Powerbaby 2.6.20-16-generic #2 SMP Wed May 23 01:46:23 UTC 2007 i686
Build Date: 04 April 2007
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Fri Jun 8 19:34:59 2007
(==) Using config file: "/etc/X11/xorg.conf"
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Error: No Symbols named "de" in the include file "de"
> Exiting
> Abandoning symbols file "default"
Errors from xkbcomp are not fatal to the X server
(EE) xf86OpenSerial: Cannot open device /dev/input/wacom
No such file or directory.
Error opening /dev/input/wacom : Success
(EE) xf86OpenSerial: Cannot open device /dev/input/wacom
No such file or directory.
Error opening /dev/input/wacom : Success
(EE) xf86OpenSerial: Cannot open device /dev/input/wacom
No such file or directory.
Error opening /dev/input/wacom : Success
Could not init font path element /usr/X11R6/lib/X11/fonts/misc, removing from list!
Could not init font path element /usr/share/fonts/X11/cyrillic, removing from list!
Could not init font path element /usr/X11R6/lib/X11/fonts/Type1, removing from list!
X Error: BadDevice, invalid or uninitialized input device 166
Major opcode: 146
Minor opcode: 3
Resource id: 0x0
Failed to open device
X Error: BadDevice, invalid or uninitialized input device 166
Major opcode: 146
Minor opcode: 3
Resource id: 0x0
Failed to open device
X Error: BadDevice, invalid or uninitialized input device 166
Major opcode: 146
Minor opcode: 3
Resource id: 0x0
Failed to open device
X Error: BadDevice, invalid or uninitialized input device 166
Major opcode: 146
Minor opcode: 3
Resource id: 0x0
Failed to open device
QImage::convertDepth: Image is a null image
QImage::smoothScale: Image is a null image
SetClientVersion: 0 9
SetClientVersion: 0 9
SetClientVersion: 0 9
SetClientVersion: 0 9
SetClientVersion: 0 9
SetClientVersion: 0 9
SetClientVersion: 0 9

Backtrace:
0: /usr/bin/X(xf86SigHandler+0x81) [0x80c5d91]
1: [0xffffe420]
2: /usr/bin/X [0x815afb0]
3: /usr/bin/X [0x815c23b]
4: /usr/bin/X(compPaintWindowBackground+0x6d) [0x80f614d]
5: /usr/bin/X(miClearToBackground+0x1b5) [0x8129f05]
6: /usr/bin/X(ProcClearToBackground+0xb6) [0x8088716]
7: /usr/bin/X [0x8142531]
8: /usr/bin/X(Dispatch+0x19f) [0x808c61f]
9: /usr/bin/X(main+0x495) [0x8074785]
10: /lib/tls/i686/cmov/libc.so.6(__libc_start_main+0xdc) [0xb7dd3ebc]
11: /usr/bin/X(FontFileCompleteXLFD+0x1e1) [0x8073ab1]

Fatal server error:
Caught signal 7. Server aborting


Backtrace:
0: /usr/bin/X(xf86SigHandler+0x81) [0x80c5d91]
1: [0xffffe420]
2: /usr/bin/X(WalkTree+0x38) [0x8076968]
3: /usr/lib/xorg/modules/drivers//nvidia_drv.so(_nv000753X+0x25) [0xb7193c51]

FatalError re-entered, aborting
Caught signal 11. Server aborting


X Window System Version 7.2.0
Release Date: 22 January 2007
X Protocol Version 11, Revision 0, Release 7.2
Build Operating System: Linux Ubuntu
Build Date: 04 April 2007
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Fri Jun 8 19:41:34 2007
(==) Using config file: "/etc/X11/xorg.conf"
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Error: No Symbols named "de" in the include file "de"
> Exiting
> Abandoning symbols file "default"
Errors from xkbcomp are not fatal to the X server
(EE) xf86OpenSerial: Cannot open device /dev/input/wacom
No such file or directory.
Error opening /dev/input/wacom : Success
(EE) xf86OpenSerial: Cannot open device /dev/input/wacom
No such file or directory.
Error opening /dev/input/wacom : Success
(EE) xf86OpenSerial: Cannot open device /dev/input/wacom
No such file or directory.
Error opening /dev/input/wacom : Success
Could not init font path element /usr/X11R6/lib/X11/fonts/misc, removing from list!
Could not init font path element /usr/share/fonts/X11/cyrillic, removing from list!
Could not init font path element /usr/X11R6/lib/X11/fonts/Type1, removing from list!
X Error: BadDevice, invalid or uninitialized input device 166
Major opcode: 146
Minor opcode: 3
Resource id: 0x0
Failed to open device
X Error: BadDevice, invalid or uninitialized input device 166
Major opcode: 146
Minor opcode: 3
Resource id: 0x0
Failed to open device
QImage::convertDepth: Image is a null image
QImage::smoothScale: Image is a null image
X Error: BadDevice, invalid or uninitialized input device 166
Major opcode: 146
Minor opcode: 3
Resource id: 0x0
Failed to open device
X Error: BadDevice, invalid or uninitialized input device 166
Major opcode: 146
Minor opcode: 3
Resource id: 0x0
Failed to open device
SetClientVersion: 0 9
SetClientVersion: 0 9
SetClientVersion: 0 9
SetClientVersion: 0 9

X Window System Version 7.2.0
Release Date: 22 January 2007
X Protocol Version 11, Revision 0, Release 7.2
Build Operating System: Linux Ubuntu
Current Operating System: Linux Powerbaby 2.6.20-16-generic #2 SMP Wed May 23 01:46:23 UTC 2007 i686
Build Date: 04 April 2007
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Fri Jun 8 19:53:26 2007
(==) Using config file: "/etc/X11/xorg.conf"
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Error: No Symbols named "de" in the include file "de"
> Exiting
> Abandoning symbols file "default"
Errors from xkbcomp are not fatal to the X server
(EE) xf86OpenSerial: Cannot open device /dev/input/wacom
No such file or directory.
Error opening /dev/input/wacom : Success
(EE) xf86OpenSerial: Cannot open device /dev/input/wacom
No such file or directory.
Error opening /dev/input/wacom : Success
(EE) xf86OpenSerial: Cannot open device /dev/input/wacom
No such file or directory.
Error opening /dev/input/wacom : Success
Could not init font path element /usr/X11R6/lib/X11/fonts/misc, removing from list!
Could not init font path element /usr/share/fonts/X11/cyrillic, removing from list!
Could not init font path element /usr/X11R6/lib/X11/fonts/Type1, removing from list!
X Error: BadDevice, invalid or uninitialized input device 166
Major opcode: 146
Minor opcode: 3
Resource id: 0x0
Failed to open device
X Error: BadDevice, invalid or uninitialized input device 166
Major opcode: 146
Minor opcode: 3
Resource id: 0x0
Failed to open device
X Error: BadDevice, invalid or uninitialized input device 166
Major opcode: 146
Minor opcode: 3
Resource id: 0x0
Failed to open device
X Error: BadDevice, invalid or uninitialized input device 166
Major opcode: 146
Minor opcode: 3
Resource id: 0x0
Failed to open device
QImage::convertDepth: Image is a null image
QImage::smoothScale: Image is a null image
SetClientVersion: 0 9
SetClientVersion: 0 9
SetClientVersion: 0 9
SetClientVersion: 0 9
MATI
08.06.07, 19:49
Bei mir war die Lösung:

"apm" in /etc/modules hinzufügen.

Jetzt funzt alles wie gewohnt.