Hi jacky0815,
Habe gerade Urlaub (bis 31.05.2007) und habe daher nicht direkt antworten können. Unten findest Du testBefore und testAfter mit dmesg erzeugt, wobei ich dort keinen Unterschied sehe.
testBefore:
-------------------------------------------------------------------------
Linux version 2.6.18.2-34-default (geeko@buildhost) (gcc version 4.1.2 20061115 (prerelease) (SUSE Linux)) #1 SMP Mon Nov 27 11:46:27 UTC 2006
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000002fffe000 (usable)
BIOS-e820: 000000002fffe000 - 0000000030000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved)
BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
767MB LOWMEM available.
found SMP MP-table at 000fe710
On node 0 totalpages: 196606
DMA zone: 4096 pages, LIFO batch:0
Normal zone: 192510 pages, LIFO batch:31
DMI 2.2 present.
Using APIC driver default
IO/L-APIC allowed because system is MP or new enough
ACPI: RSDP (v000 DELL ) @ 0x000fdcd0
ACPI: RSDT (v001 DELL PE1300 0x00000001 MSFT 0x0100000a) @ 0x000fdce4
ACPI: FADT (v001 DELL PE1300 0x00000001 MSFT 0x0100000a) @ 0x000fdd10
ACPI: MADT (v001 DELL PE1300 0x00000001 MSFT 0x0100000a) @ 0x000fdd84
ACPI: DSDT (v001 DELL PE1300 0x00000001 MSFT 0x0100000a) @ 0x00000000
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
Processor #1 6:5 APIC version 17
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x00] enabled)
Processor #0 6:5 APIC version 17
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode: Flat. Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 40000000 (gap: 30000000:cec00000)
Detected 348.213 MHz processor.
Built 1 zonelists. Total pages: 196606
Kernel command line: root=/dev/sda3 vga=0x317 resume=/dev/sda1 splash=silent
bootsplash: silent mode.
mapped APIC to ffffd000 (fee00000)
mapped IOAPIC to ffffc000 (fec00000)
Enabling fast FPU save and restore... done.
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 16384 bytes)
Console: colour dummy device 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 772520k/786424k available (1697k kernel code, 13204k reserved, 968k data, 196k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 697.29 BogoMIPS (lpj=1394597)
Security Framework v1.0.0 initialized
Mount-cache hash table entries: 512
CPU: After generic identify, caps: 0183fbff 00000000 00000000 00000000 00000000 00000000 00000000
CPU: After vendor identify, caps: 0183fbff 00000000 00000000 00000000 00000000 00000000 00000000
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 512K
CPU: After all inits, caps: 0183fbff 00000000 00000000 00000040 00000000 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Compat vDSO mapped to ffffe000.
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
checking if image is initramfs... it is
Freeing initrd memory: 2894k freed
ACPI: Core revision 20060707
CPU0: Intel Pentium II (Deschutes) stepping 02
SMP alternatives: switching to SMP code
Booting processor 1/0 eip 3000
Initializing CPU#1
Calibrating delay using timer specific routine.. 696.50 BogoMIPS (lpj=1393014)
CPU: After generic identify, caps: 0183fbff 00000000 00000000 00000000 00000000 00000000 00000000
CPU: After vendor identify, caps: 0183fbff 00000000 00000000 00000000 00000000 00000000 00000000
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 512K
CPU: After all inits, caps: 0183fbff 00000000 00000000 00000040 00000000 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#1.
CPU1: Intel Pentium II (Deschutes) stepping 02
Total of 2 processors activated (1393.80 BogoMIPS).
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
checking TSC synchronization across 2 CPUs: passed.
Brought up 2 CPUs
migration_cost=2406
Dell PowerEdge 1300 series board detected. Selecting BIOS-method for reboots.
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xfc84e, last bus=2
PCI: Using configuration type 1
Setting up standard PCI resources
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
* Found PM-Timer Bug on the chipset. Due to workarounds for a bug,
* this clock source is slow. Consider trying other clock sources
PCI quirk: region 0800-083f claimed by PIIX4 ACPI
PCI quirk: region 0850-085f claimed by PIIX4 SMB
Boot video device is 0000:01:00.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI2._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 9 10 *11 12 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 6 7 9 *10 11 12 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 9 10 *11 12 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 9 10 *11 12 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 9 10 11 12 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 *5 6 7 9 10 11 12 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled.
ACPI: Power Resource [PFAN] (on)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 13 devices
PnPBIOS: Disabled by ACPI PNP
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
pnp: 00:0b: ioport range 0x810-0x83f has been reserved
pnp: 00:0b: ioport range 0x850-0x85f has been reserved
PCI: Bridge: 0000:00:01.0
IO window: e000-efff
MEM window: fb000000-fdffffff
PREFETCH window: f6000000-f6ffffff
PCI: Bridge: 0000:00:02.0
IO window: d000-dfff
MEM window: f9000000-faffffff
PREFETCH window: f5000000-f5ffffff
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
Machine check exception polling timer started.
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
apm: disabled - APM is not SMP safe.
audit: initializing netlink socket (disabled)
audit(1179161150.896:1): initialized
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Initializing Cryptographic API
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
Limiting direct PCI/PCI transfers.
vesafb: framebuffer at 0xfc000000, mapped to 0xf0880000, using 2048k, total 2048k
vesafb: mode is 1024x768x16, linelength=2048, pages=0
vesafb: protected mode interface info at c000:4ade
vesafb: pmi: set display start = c00c4b82, set palette = c00c4bfa
vesafb: pmi: ports = e085 e01f e0b4 e0b8 e018 e014 e0c0 e0c3 e0c1
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
bootsplash 3.1.6-2004/03/31: looking for picture...<6> silentjpeg size 81749 bytes,<6> does not fit into framebuffer.
...found (1024x768, 46202 bytes, v3).
Console: switching to colour frame buffer device 124x44
fb0: VESA VGA frame buffer device
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Real Time Clock Driver v1.12ac
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
Floppy drive(s): fd0 is 1.44M
FDC 0 is a National Semiconductor PC87306
RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize
PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
mice: PS/2 mouse device common for all mice
input: PC Speaker as /class/input/input0
md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: bitmap version 4.39
NET: Registered protocol family 1
Using IPI No-Shortcut mode
ACPI: (supports S0 S4 S5)
Time: tsc clocksource has been installed.
Freeing unused kernel memory: 196k freed
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
SCSI subsystem initialized
PIIX4: IDE controller at PCI slot 0000:00:07.1
PIIX4: chipset revision 1
PIIX4: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:DMA
Probing IDE interface ide0...
hda: CD-ROM CDU701, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdc: WDC WD2500JB-00REA0, ATA DISK drive
hdd: ST380011A, ATA DISK drive
ide1 at 0x170-0x177,0x376 on irq 15
hdc: max request size: 512KiB
hdc: 488397168 sectors (250059 MB) w/8192KiB Cache, CHS=30401/255/63, UDMA(33)
hdc: cache flushes supported
hdc: hdc1 < hdc5 >
hdd: max request size: 512KiB
hdd: 156301488 sectors (80026 MB) w/2048KiB Cache, CHS=16383/255/63, UDMA(33)
hdd: cache flushes supported
hdd: hdd1 < hdd5 hdd6 hdd7 hdd8 >
ACPI: PCI Interrupt 0000:02:0b.0[A] -> GSI 16 (level, low) -> IRQ 169
scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 7.0
<Adaptec aic7890/91 Ultra2 SCSI adapter>
aic7890/91: Ultra2 Wide Channel A, SCSI Id=7, 32/253 SCBs
Vendor: QUANTUM Model: VIKING II 4.5WLS Rev: 5520
Type: Direct-Access ANSI SCSI revision: 02
scsi0:A:0:0: Tagged Queuing enabled. Depth 32
target0:0:0: Beginning Domain Validation
target0:0:0: wide asynchronous
target0:0:0: FAST-40 WIDE SCSI 80.0 MB/s ST (25 ns, offset 31)
target0:0:0: Domain Validation skipping write tests
target0:0:0: Ending Domain Validation
SCSI device sda: 8910423 512-byte hdwr sectors (4562 MB)
sda: Write Protect is off
sda: Mode Sense: b3 00 00 08
SCSI device sda: drive cache: write back
SCSI device sda: 8910423 512-byte hdwr sectors (4562 MB)
sda: Write Protect is off
sda: Mode Sense: b3 00 00 08
SCSI device sda: drive cache: write back
sda: sda1 sda2 sda3
sd 0:0:0:0: Attached scsi disk sda
sd 0:0:0:0: Attached scsi generic sg0 type 0
Vendor: FUJITSU Model: MAG3091LP Rev: 5210
Type: Direct-Access ANSI SCSI revision: 02
scsi0:A:2:0: Tagged Queuing enabled. Depth 32
target0:0:2: Beginning Domain Validation
target0:0:2: wide asynchronous
target0:0:2: FAST-40 WIDE SCSI 80.0 MB/s ST (25 ns, offset 63)
target0:0:2: Domain Validation skipping write tests
target0:0:2: Ending Domain Validation
SCSI device sdb: 17827698 512-byte hdwr sectors (9128 MB)
sdb: Write Protect is off
sdb: Mode Sense: a7 00 10 08
SCSI device sdb: drive cache: write back w/ FUA
SCSI device sdb: 17827698 512-byte hdwr sectors (9128 MB)
sdb: Write Protect is off
sdb: Mode Sense: a7 00 10 08
SCSI device sdb: drive cache: write back w/ FUA
sdb: sdb1 < sdb5 sdb6 sdb7 >
sd 0:0:2:0: Attached scsi disk sdb
sd 0:0:2:0: Attached scsi generic sg1 type 0
ACPI: Fan [FAN0] (on)
BIOS EDD facility v0.16 2004-Jun-25, 4 devices found
Attempting manual resume
ReiserFS: sda3: found reiserfs format "3.6" with standard journal
ReiserFS: sda3: using ordered data mode
reiserfs: using flush barriers
ReiserFS: sda3: journal params: device sda3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: sda3: checking transaction log (sda3)
ReiserFS: sda3: Using r5 hash to sort names
parport: PnPBIOS parport detected.
parport0: PC-style at 0x378 (0x778), irq 7, using FIFO [PCSPP,TRISTATE,COMPAT,EPP,ECP]
lp0: using parport0 (interrupt-driven).
piix4_smbus 0000:00:07.3: Found 0000:00:07.3 device
piix4_smbus 0000:00:07.3: Host SMBus controller not enabled!
usbcore: registered new driver usbfs
usbcore: registered new driver hub
USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt 0000:00:07.2[D] -> GSI 19 (level, low) -> IRQ 177
uhci_hcd 0000:00:07.2: UHCI Host Controller
uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:07.2: irq 177, io base 0x0000cce0
usb usb1: new device found, idVendor=0000, idProduct=0000
usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: UHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.18.2-34-default uhci_hcd
usb usb1: SerialNumber: 0000:00:07.2
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
Intel(R) PRO/1000 Network Driver - version 7.1.9-k4-NAPI
Copyright (c) 1999-2006 Intel Corporation.
ACPI: PCI Interrupt 0000:00:0d.0[A] -> GSI 17 (level, low) -> IRQ 185
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
e1000: 0000:00:0d.0: e1000_probe: (PCI:33MHz:32-bit) 00:0e:0c:c1:7c:f7
Linux agpgart interface v0.101 (c) Dave Jones
e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
ACPI: PCI Interrupt 0000:00:0e.0[A] -> GSI 18 (level, low) -> IRQ 193
e1000: 0000:00:0e.0: e1000_probe: (PCI:33MHz:32-bit) 00:0e:0c:c1:7c:f2
e1000: eth1: e1000_probe: Intel(R) PRO/1000 Network Connection
ACPI: PCI Interrupt 0000:00:10.0[A] -> GSI 19 (level, low) -> IRQ 177
hda: ATAPI 14X CD-ROM drive, 128kB Cache, DMA
Uniform CD-ROM driver Revision: 3.20
e1000: 0000:00:10.0: e1000_probe: (PCI:33MHz:32-bit) 00:0e:0c:c1:67:c7
e1000: eth2: e1000_probe: Intel(R) PRO/1000 Network Connection
ACPI: PCI Interrupt 0000:00:11.0[A] -> GSI 20 (level, low) -> IRQ 201
e1000: 0000:00:11.0: e1000_probe: (PCI:33MHz:32-bit) 00:0e:0c:c1:7c:ea
e1000: eth3: e1000_probe: Intel(R) PRO/1000 Network Connection
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
agpgart: Detected an Intel 440BX Chipset.
agpgart: AGP aperture is 64M @ 0xf0000000
Adding 1614492k swap on /dev/sda1. Priority:-1 extents:1 across:1614492k
device-mapper: ioctl: 4.7.0-ioctl (2006-06-24) initialised: dm-devel@redhat.com
loop: loaded (max 8 devices)
kjournald starting. Commit interval 5 seconds
EXT3 FS on sdb5, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on sdb7, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on hdd7, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on sdb6, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on hdc5, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on hdd6, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on hdd8, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on hdd5, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
AppArmor: AppArmor initialized
audit(1179161186.306:2): AppArmor initialized
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
IPv6 over IPv4 tunneling driver
ip6_tables: (C) 2000-2006 Netfilter Core Team
ip_tables: (C) 2000-2006 Netfilter Core Team
Netfilter messages via NETLINK v0.30.
ip_conntrack version 2.4 (6143 buckets, 49144 max) - 228 bytes per conntrack
IA-32 Microcode Update Driver: v1.14a <tigran@veritas.com>
ACPI: Power Button (FF) [PWRF]
powernow: This module only works with AMD K7 CPUs
ADDRCONF(NETDEV_UP): eth0: link is not ready
e1000: eth0: e1000_watchdog: NIC Link is Up 100 Mbps Full Duplex
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
ADDRCONF(NETDEV_UP): eth1: link is not ready
e1000: eth1: e1000_watchdog: NIC Link is Up 100 Mbps Full Duplex
ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
ADDRCONF(NETDEV_UP): eth2: link is not ready
e1000: eth2: e1000_watchdog: NIC Link is Up 100 Mbps Full Duplex
ADDRCONF(NETDEV_CHANGE): eth2: link becomes ready
ADDRCONF(NETDEV_UP): eth3: link is not ready
e1000: eth3: e1000_watchdog: NIC Link is Up 100 Mbps Full Duplex
ADDRCONF(NETDEV_CHANGE): eth3: link becomes ready
eth0: no IPv6 routers present
eth1: no IPv6 routers present
eth2: no IPv6 routers present
eth3: no IPv6 routers present
NET: Registered protocol family 17
-----------------------------------------------------------------------
testAfter
-----------------------------------------------------------------------
Linux version 2.6.18.2-34-default (geeko@buildhost) (gcc version 4.1.2 20061115 (prerelease) (SUSE Linux)) #1 SMP Mon Nov 27 11:46:27 UTC 2006
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000002fffe000 (usable)
BIOS-e820: 000000002fffe000 - 0000000030000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved)
BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
767MB LOWMEM available.
found SMP MP-table at 000fe710
On node 0 totalpages: 196606
DMA zone: 4096 pages, LIFO batch:0
Normal zone: 192510 pages, LIFO batch:31
DMI 2.2 present.
Using APIC driver default
IO/L-APIC allowed because system is MP or new enough
ACPI: RSDP (v000 DELL ) @ 0x000fdcd0
ACPI: RSDT (v001 DELL PE1300 0x00000001 MSFT 0x0100000a) @ 0x000fdce4
ACPI: FADT (v001 DELL PE1300 0x00000001 MSFT 0x0100000a) @ 0x000fdd10
ACPI: MADT (v001 DELL PE1300 0x00000001 MSFT 0x0100000a) @ 0x000fdd84
ACPI: DSDT (v001 DELL PE1300 0x00000001 MSFT 0x0100000a) @ 0x00000000
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
Processor #1 6:5 APIC version 17
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x00] enabled)
Processor #0 6:5 APIC version 17
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode: Flat. Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 40000000 (gap: 30000000:cec00000)
Detected 348.213 MHz processor.
Built 1 zonelists. Total pages: 196606
Kernel command line: root=/dev/sda3 vga=0x317 resume=/dev/sda1 splash=silent
bootsplash: silent mode.
mapped APIC to ffffd000 (fee00000)
mapped IOAPIC to ffffc000 (fec00000)
Enabling fast FPU save and restore... done.
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 16384 bytes)
Console: colour dummy device 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 772520k/786424k available (1697k kernel code, 13204k reserved, 968k data, 196k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 697.29 BogoMIPS (lpj=1394597)
Security Framework v1.0.0 initialized
Mount-cache hash table entries: 512
CPU: After generic identify, caps: 0183fbff 00000000 00000000 00000000 00000000 00000000 00000000
CPU: After vendor identify, caps: 0183fbff 00000000 00000000 00000000 00000000 00000000 00000000
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 512K
CPU: After all inits, caps: 0183fbff 00000000 00000000 00000040 00000000 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Compat vDSO mapped to ffffe000.
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
checking if image is initramfs... it is
Freeing initrd memory: 2894k freed
ACPI: Core revision 20060707
CPU0: Intel Pentium II (Deschutes) stepping 02
SMP alternatives: switching to SMP code
Booting processor 1/0 eip 3000
Initializing CPU#1
Calibrating delay using timer specific routine.. 696.50 BogoMIPS (lpj=1393014)
CPU: After generic identify, caps: 0183fbff 00000000 00000000 00000000 00000000 00000000 00000000
CPU: After vendor identify, caps: 0183fbff 00000000 00000000 00000000 00000000 00000000 00000000
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 512K
CPU: After all inits, caps: 0183fbff 00000000 00000000 00000040 00000000 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#1.
CPU1: Intel Pentium II (Deschutes) stepping 02
Total of 2 processors activated (1393.80 BogoMIPS).
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
checking TSC synchronization across 2 CPUs: passed.
Brought up 2 CPUs
migration_cost=2406
Dell PowerEdge 1300 series board detected. Selecting BIOS-method for reboots.
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xfc84e, last bus=2
PCI: Using configuration type 1
Setting up standard PCI resources
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
* Found PM-Timer Bug on the chipset. Due to workarounds for a bug,
* this clock source is slow. Consider trying other clock sources
PCI quirk: region 0800-083f claimed by PIIX4 ACPI
PCI quirk: region 0850-085f claimed by PIIX4 SMB
Boot video device is 0000:01:00.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI2._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 9 10 *11 12 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 6 7 9 *10 11 12 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 9 10 *11 12 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 9 10 *11 12 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 9 10 11 12 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 *5 6 7 9 10 11 12 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled.
ACPI: Power Resource [PFAN] (on)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 13 devices
PnPBIOS: Disabled by ACPI PNP
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
pnp: 00:0b: ioport range 0x810-0x83f has been reserved
pnp: 00:0b: ioport range 0x850-0x85f has been reserved
PCI: Bridge: 0000:00:01.0
IO window: e000-efff
MEM window: fb000000-fdffffff
PREFETCH window: f6000000-f6ffffff
PCI: Bridge: 0000:00:02.0
IO window: d000-dfff
MEM window: f9000000-faffffff
PREFETCH window: f5000000-f5ffffff
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
Machine check exception polling timer started.
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
apm: disabled - APM is not SMP safe.
audit: initializing netlink socket (disabled)
audit(1179161150.896:1): initialized
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Initializing Cryptographic API
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
Limiting direct PCI/PCI transfers.
vesafb: framebuffer at 0xfc000000, mapped to 0xf0880000, using 2048k, total 2048k
vesafb: mode is 1024x768x16, linelength=2048, pages=0
vesafb: protected mode interface info at c000:4ade
vesafb: pmi: set display start = c00c4b82, set palette = c00c4bfa
vesafb: pmi: ports = e085 e01f e0b4 e0b8 e018 e014 e0c0 e0c3 e0c1
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
bootsplash 3.1.6-2004/03/31: looking for picture...<6> silentjpeg size 81749 bytes,<6> does not fit into framebuffer.
...found (1024x768, 46202 bytes, v3).
Console: switching to colour frame buffer device 124x44
fb0: VESA VGA frame buffer device
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Real Time Clock Driver v1.12ac
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
Floppy drive(s): fd0 is 1.44M
FDC 0 is a National Semiconductor PC87306
RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize
PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
mice: PS/2 mouse device common for all mice
input: PC Speaker as /class/input/input0
md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: bitmap version 4.39
NET: Registered protocol family 1
Using IPI No-Shortcut mode
ACPI: (supports S0 S4 S5)
Time: tsc clocksource has been installed.
Freeing unused kernel memory: 196k freed
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
SCSI subsystem initialized
PIIX4: IDE controller at PCI slot 0000:00:07.1
PIIX4: chipset revision 1
PIIX4: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:DMA
Probing IDE interface ide0...
hda: CD-ROM CDU701, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdc: WDC WD2500JB-00REA0, ATA DISK drive
hdd: ST380011A, ATA DISK drive
ide1 at 0x170-0x177,0x376 on irq 15
hdc: max request size: 512KiB
hdc: 488397168 sectors (250059 MB) w/8192KiB Cache, CHS=30401/255/63, UDMA(33)
hdc: cache flushes supported
hdc: hdc1 < hdc5 >
hdd: max request size: 512KiB
hdd: 156301488 sectors (80026 MB) w/2048KiB Cache, CHS=16383/255/63, UDMA(33)
hdd: cache flushes supported
hdd: hdd1 < hdd5 hdd6 hdd7 hdd8 >
ACPI: PCI Interrupt 0000:02:0b.0[A] -> GSI 16 (level, low) -> IRQ 169
scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 7.0
<Adaptec aic7890/91 Ultra2 SCSI adapter>
aic7890/91: Ultra2 Wide Channel A, SCSI Id=7, 32/253 SCBs
Vendor: QUANTUM Model: VIKING II 4.5WLS Rev: 5520
Type: Direct-Access ANSI SCSI revision: 02
scsi0:A:0:0: Tagged Queuing enabled. Depth 32
target0:0:0: Beginning Domain Validation
target0:0:0: wide asynchronous
target0:0:0: FAST-40 WIDE SCSI 80.0 MB/s ST (25 ns, offset 31)
target0:0:0: Domain Validation skipping write tests
target0:0:0: Ending Domain Validation
SCSI device sda: 8910423 512-byte hdwr sectors (4562 MB)
sda: Write Protect is off
sda: Mode Sense: b3 00 00 08
SCSI device sda: drive cache: write back
SCSI device sda: 8910423 512-byte hdwr sectors (4562 MB)
sda: Write Protect is off
sda: Mode Sense: b3 00 00 08
SCSI device sda: drive cache: write back
sda: sda1 sda2 sda3
sd 0:0:0:0: Attached scsi disk sda
sd 0:0:0:0: Attached scsi generic sg0 type 0
Vendor: FUJITSU Model: MAG3091LP Rev: 5210
Type: Direct-Access ANSI SCSI revision: 02
scsi0:A:2:0: Tagged Queuing enabled. Depth 32
target0:0:2: Beginning Domain Validation
target0:0:2: wide asynchronous
target0:0:2: FAST-40 WIDE SCSI 80.0 MB/s ST (25 ns, offset 63)
target0:0:2: Domain Validation skipping write tests
target0:0:2: Ending Domain Validation
SCSI device sdb: 17827698 512-byte hdwr sectors (9128 MB)
sdb: Write Protect is off
sdb: Mode Sense: a7 00 10 08
SCSI device sdb: drive cache: write back w/ FUA
SCSI device sdb: 17827698 512-byte hdwr sectors (9128 MB)
sdb: Write Protect is off
sdb: Mode Sense: a7 00 10 08
SCSI device sdb: drive cache: write back w/ FUA
sdb: sdb1 < sdb5 sdb6 sdb7 >
sd 0:0:2:0: Attached scsi disk sdb
sd 0:0:2:0: Attached scsi generic sg1 type 0
ACPI: Fan [FAN0] (on)
BIOS EDD facility v0.16 2004-Jun-25, 4 devices found
Attempting manual resume
ReiserFS: sda3: found reiserfs format "3.6" with standard journal
ReiserFS: sda3: using ordered data mode
reiserfs: using flush barriers
ReiserFS: sda3: journal params: device sda3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: sda3: checking transaction log (sda3)
ReiserFS: sda3: Using r5 hash to sort names
parport: PnPBIOS parport detected.
parport0: PC-style at 0x378 (0x778), irq 7, using FIFO [PCSPP,TRISTATE,COMPAT,EPP,ECP]
lp0: using parport0 (interrupt-driven).
piix4_smbus 0000:00:07.3: Found 0000:00:07.3 device
piix4_smbus 0000:00:07.3: Host SMBus controller not enabled!
usbcore: registered new driver usbfs
usbcore: registered new driver hub
USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt 0000:00:07.2[D] -> GSI 19 (level, low) -> IRQ 177
uhci_hcd 0000:00:07.2: UHCI Host Controller
uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:07.2: irq 177, io base 0x0000cce0
usb usb1: new device found, idVendor=0000, idProduct=0000
usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: UHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.18.2-34-default uhci_hcd
usb usb1: SerialNumber: 0000:00:07.2
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
Intel(R) PRO/1000 Network Driver - version 7.1.9-k4-NAPI
Copyright (c) 1999-2006 Intel Corporation.
ACPI: PCI Interrupt 0000:00:0d.0[A] -> GSI 17 (level, low) -> IRQ 185
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
e1000: 0000:00:0d.0: e1000_probe: (PCI:33MHz:32-bit) 00:0e:0c:c1:7c:f7
Linux agpgart interface v0.101 (c) Dave Jones
e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
ACPI: PCI Interrupt 0000:00:0e.0[A] -> GSI 18 (level, low) -> IRQ 193
e1000: 0000:00:0e.0: e1000_probe: (PCI:33MHz:32-bit) 00:0e:0c:c1:7c:f2
e1000: eth1: e1000_probe: Intel(R) PRO/1000 Network Connection
ACPI: PCI Interrupt 0000:00:10.0[A] -> GSI 19 (level, low) -> IRQ 177
hda: ATAPI 14X CD-ROM drive, 128kB Cache, DMA
Uniform CD-ROM driver Revision: 3.20
e1000: 0000:00:10.0: e1000_probe: (PCI:33MHz:32-bit) 00:0e:0c:c1:67:c7
e1000: eth2: e1000_probe: Intel(R) PRO/1000 Network Connection
ACPI: PCI Interrupt 0000:00:11.0[A] -> GSI 20 (level, low) -> IRQ 201
e1000: 0000:00:11.0: e1000_probe: (PCI:33MHz:32-bit) 00:0e:0c:c1:7c:ea
e1000: eth3: e1000_probe: Intel(R) PRO/1000 Network Connection
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
agpgart: Detected an Intel 440BX Chipset.
agpgart: AGP aperture is 64M @ 0xf0000000
Adding 1614492k swap on /dev/sda1. Priority:-1 extents:1 across:1614492k
device-mapper: ioctl: 4.7.0-ioctl (2006-06-24) initialised: dm-devel@redhat.com
loop: loaded (max 8 devices)
kjournald starting. Commit interval 5 seconds
EXT3 FS on sdb5, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on sdb7, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on hdd7, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on sdb6, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on hdc5, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on hdd6, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on hdd8, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on hdd5, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
AppArmor: AppArmor initialized
audit(1179161186.306:2): AppArmor initialized
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
IPv6 over IPv4 tunneling driver
ip6_tables: (C) 2000-2006 Netfilter Core Team
ip_tables: (C) 2000-2006 Netfilter Core Team
Netfilter messages via NETLINK v0.30.
ip_conntrack version 2.4 (6143 buckets, 49144 max) - 228 bytes per conntrack
IA-32 Microcode Update Driver: v1.14a <tigran@veritas.com>
ACPI: Power Button (FF) [PWRF]
powernow: This module only works with AMD K7 CPUs
ADDRCONF(NETDEV_UP): eth0: link is not ready
e1000: eth0: e1000_watchdog: NIC Link is Up 100 Mbps Full Duplex
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
ADDRCONF(NETDEV_UP): eth1: link is not ready
e1000: eth1: e1000_watchdog: NIC Link is Up 100 Mbps Full Duplex
ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
ADDRCONF(NETDEV_UP): eth2: link is not ready
e1000: eth2: e1000_watchdog: NIC Link is Up 100 Mbps Full Duplex
ADDRCONF(NETDEV_CHANGE): eth2: link becomes ready
ADDRCONF(NETDEV_UP): eth3: link is not ready
e1000: eth3: e1000_watchdog: NIC Link is Up 100 Mbps Full Duplex
ADDRCONF(NETDEV_CHANGE): eth3: link becomes ready
eth0: no IPv6 routers present
eth1: no IPv6 routers present
eth2: no IPv6 routers present
eth3: no IPv6 routers present
NET: Registered protocol family 17
-----------------------------------------------------------------------
Danke, bis dann