mynonA
28.02.07, 19:20
Edit:argh ich bitte den nächsten admin oder moderator, den Treadtitel in "Alsa oss emulation geht, alsa direkt jedoch nicht" zu äöndern
Hallo, ich habe ein Problem, und hoffe nun bei der diagnose nichts zu vergessen:
Ich habe alsa fest in dem 2.6.20.1er Kernel eingebaut, jedoch habe ich nun ein kleines Problem: Die Alsa ausgabe funktioniert nicht, die OSS emulationhingegen jedoch tadellos, ich verwende eine Soundblaster Live 5.1 Digital mit emu10k1 chipsatz Hardware mixing unterstützt - und somit kein Soudnserver.
Apropro System ist ein gester Frisch aufgestztes Crux 2.2
hier ein paar ausgaben:
bash-3.00# dmesg
und SMP MP-table at 000fbc70
Entering add_active_range(0, 0, 196592) 0 entries of 256 used
Zone PFN ranges:
DMA 0 -> 4096
Normal 4096 -> 196592
HighMem 196592 -> 196592
early_node_map[1] active PFN ranges
0: 0 -> 196592
On node 0 totalpages: 196592
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 4064 pages, LIFO batch:0
Normal zone: 1503 pages used for memmap
Normal zone: 190993 pages, LIFO batch:31
HighMem zone: 0 pages used for memmap
DMI 2.3 present.
ACPI: RSDP (v000 AMI ) @ 0x000fab70
ACPI: RSDT (v001 AMIINT SiS740XX 0x00001000 MSFT 0x0100000b) @ 0x2fff0000
ACPI: FADT (v001 AMIINT SiS740XX 0x00000011 MSFT 0x0100000b) @ 0x2fff0030
ACPI: MADT (v001 AMIINT SiS740XX 0x00001000 MSFT 0x0100000b) @ 0x2fff00c0
ACPI: DSDT (v001 SiS 748 0x00000100 MSFT 0x0100000d) @ 0x00000000
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Processor #0 6:10 APIC version 16
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
Using ACPI for processor (LAPIC) configuration information
Intel MultiProcessor Specification v1.4
Virtual Wire compatibility mode.
OEM ID: SiS Product ID: 748 APIC at: 0xFEE00000
I/O APIC #2 Version 17 at 0xFEC00000.
Enabling APIC mode: Flat. Using 1 I/O APICs
Processors: 1
Allocating PCI resources starting at 40000000 (gap: 30000000:cec00000)
Detected 2032.837 MHz processor.
Built 1 zonelists. Total pages: 195057
Kernel command line: BOOT_IMAGE=CRUX-2.6.20.1 ro root=341
mapped APIC to ffffd000 (fee00000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 16384 bytes)
Console: colour dummy device 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 773328k/786368k available (3621k kernel code, 12500k reserved, 1337k data, 296k init, 0k highmem)
virtual kernel memory layout:
fixmap : 0xfffea000 - 0xfffff000 ( 84 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xf0800000 - 0xff7fe000 ( 239 MB)
lowmem : 0xc0000000 - 0xefff0000 ( 767 MB)
.init : 0xc05da000 - 0xc0624000 ( 296 kB)
.data : 0xc04897e4 - 0xc05d7c94 (1337 kB)
.text : 0xc0100000 - 0xc04897e4 (3621 kB)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 4067.44 BogoMIPS (lpj=8134887)
Mount-cache hash table entries: 512
CPU: After generic identify, caps: 0383fbff c1c3fbff 00000000 00000000 00000000 00000000 00000000
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU: After all inits, caps: 0383fbff c1c3fbff 00000000 00000420 00000000 00000000 00000000
Compat vDSO mapped to ffffe000.
CPU: AMD Athlon(tm) XP 2600+ stepping 00
Checking 'hlt' instruction... OK.
ACPI: Core revision 20060707
ACPI: setting ELCR to 0200 (from 0c08)
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xfdb31, last bus=2
PCI: Using configuration type 1
Setting up standard PCI resources
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
Uncovering SIS963 that hid as a SIS503 (compatible=0)
Enabling SiS 96x SMBus.
Boot video device is 0000:01:00.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: Power Resource [URP1] (off)
ACPI: Power Resource [URP2] (off)
ACPI: Power Resource [FDDP] (off)
ACPI: Power Resource [LPTP] (off)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *10 11 12 14 15)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: ACPI device : hid PNP0A03
pnp: ACPI device : hid PNP0C02
pnp: ACPI device : hid PNP0200
pnp: ACPI device : hid PNP0B00
pnp: ACPI device : hid PNP0800
pnp: ACPI device : hid PNP0C04
pnp: ACPI device : hid PNP0F03
pnp: ACPI device : hid PNP0303
pnp: ACPI device : hid PNP0700
pnp: ACPI device : hid PNP0501
pnp: ACPI device : hid PNP0401
pnp: ACPI device : hid PNPB02F
pnp: PnP ACPI: found 12 devices
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
pnp: the driver 'system' has been registered
pnp: match found with the PnP device '00:01' and the driver 'system'
PCI: Bridge: 0000:00:01.0
IO window: disabled.
MEM window: cdd00000-cfefffff
PREFETCH window: bd900000-cdbfffff
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 7, 524288 bytes)
TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
microcode: CPU0 not a capable Intel processor
IA-32 Microcode Update Driver: v1.14a <tigran@aivazian.fsnet.co.uk>
fuse init (API version 7.8)
io scheduler noop registered
io scheduler anticipatory registered (default)
io scheduler deadline registered
io scheduler cfq registered
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
vesafb: framebuffer at 0xc0000000, mapped to 0xf0880000, using 3072k, total 131072k
vesafb: mode is 1024x768x16, linelength=2048, pages=1
vesafb: protected mode interface info at c000:e910
vesafb: pmi: set display start = c00ce955, set palette = c00ce9da
vesafb: pmi: ports = b4c3 b503 ba03 c003 c103 c403 c503 c603 c703 c803 c903 cc03 ce03 cf03 d003 d103 d203 d303 d403 d503 da03 ff03
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
Console: switching to colour frame buffer device 128x48
fb0: VESA VGA frame buffer device
input: Power Button (FF) as /class/input/input0
ACPI: Power Button (FF) [PWRF]
input: Power Button (CM) as /class/input/input1
ACPI: Power Button (CM) [PWRB]
Using specific hotkey driver
Generic RTC Driver v1.07
Non-volatile memory driver v1.2
Linux agpgart interface v0.101 (c) Dave Jones
agpgart: Detected SiS 746 chipset
agpgart: AGP aperture is 64M @ 0xd0000000
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
pnp: the driver 'serial' has been registered
pnp: match found with the PnP device '00:09' and the driver 'serial'
00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
pnp: the driver 'parport_pc' has been registered
pnp: match found with the PnP device '00:0a' and the driver 'parport_pc'
parport: PnPBIOS parport detected.
parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP(,...)]
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
loop: loaded (max 8 devices)
Compaq SMART2 Driver (v 2.6.0)
HP CISS Driver (v 3.6.14)
usbcore: registered new interface driver ub
sis900.c: v1.08.10 Apr. 2 2006
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
ACPI: PCI Interrupt 0000:00:04.0[A] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
0000:00:04.0: Realtek RTL8201 PHY transceiver found at address 1.
0000:00:04.0: Using transceiver found at address 1 as default
eth0: SiS 900 PCI Fast Ethernet at 0xd800, IRQ 11, 00:0b:6a:2a:3c:bb.
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
SIS5513: IDE controller at PCI slot 0000:00:02.5
SIS5513: chipset revision 0
SIS5513: not 100% native mode: will probe irqs later
SIS5513: SiS 962/963 MuTIOL IDE UDMA133 controller
ide0: BM-DMA at 0xff00-0xff07, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0xff08-0xff0f, BIOS settings: hdc:DMA, hdd:DMA
Probing IDE interface ide0...
hda: Maxtor 6Y120P0, ATA DISK drive
hdb: IC35L060AVER07-0, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdc: TOSHIBA DVD-ROM SD-M1612, ATAPI CD/DVD-ROM drive
hdd: PLEXTOR CD-R PX-W5224A, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 128KiB
hda: 234375000 sectors (120000 MB) w/7936KiB Cache, CHS=65535/16/63, UDMA(133)
hda: cache flushes supported
hda: hda1 hda2 < hda5 >
hdb: max request size: 128KiB
hdb: 120103200 sectors (61492 MB) w/1916KiB Cache, CHS=65535/16/63, UDMA(100)
hdb: cache flushes not supported
hdb: hdb1 hdb2 hdb3
hdc: ATAPI 48X DVD-ROM drive, 512kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
hdd: ATAPI 40X CD-ROM CD-R/RW drive, 2048kB Cache, DMA
Loading Adaptec I2O RAID: Version 2.4 Build 5go
Detecting Adaptec I2O RAID controllers...
Adaptec aacraid driver (1.1-5[2423]-mh3)
DC390: clustering now enabled by default. If you get problems load
with "disable_clustering=1" and report to maintainers
megasas: 00.00.03.05 Mon Oct 02 11:21:32 PDT 2006
GDT-HA: Storage RAID Controller Driver. Version: 3.05
GDT-HA: Found 0 PCI Storage RAID Controllers
3ware Storage Controller device driver for Linux v1.26.02.002.
3ware 9000 Storage Controller device driver for Linux v2.26.02.008.
nsp32: loading...
aoe: AoE v32 initialised.
ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 10
PCI: setting IRQ 10 as level-triggered
ACPI: PCI Interrupt 0000:00:03.2[D] -> Link [LNKH] -> GSI 10 (level, low) -> IRQ 10
ehci_hcd 0000:00:03.2: EHCI Host Controller
ehci_hcd 0000:00:03.2: new USB bus registered, assigned bus number 1
PCI: cache line size of 64 is not supported by device 0000:00:03.2
ehci_hcd 0000:00:03.2: irq 10, io mem 0xcffff000
ehci_hcd 0000:00:03.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 11
ACPI: PCI Interrupt 0000:00:03.0[A] -> Link [LNKE] -> GSI 11 (level, low) -> IRQ 11
ohci_hcd 0000:00:03.0: OHCI Host Controller
ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:03.0: irq 11, io mem 0xcfffd000
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 3 ports detected
ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 3
PCI: setting IRQ 3 as level-triggered
ACPI: PCI Interrupt 0000:00:03.1[B] -> Link [LNKF] -> GSI 3 (level, low) -> IRQ 3
ohci_hcd 0000:00:03.1: OHCI Host Controller
ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 3
ohci_hcd 0000:00:03.1: irq 3, io mem 0xcfffe000
usb 1-1: new high speed USB device using ehci_hcd and address 2
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 3 ports detected
usb 1-1: configuration #1 chosen from 1 choice
Initializing USB Mass Storage driver...
usb 1-3: new high speed USB device using ehci_hcd and address 4
usb 1-3: configuration #1 chosen from 1 choice
uba: uba1
usb 3-1: new full speed USB device using ohci_hcd and address 2
usb 3-1: configuration #1 chosen from 1 choice
usb 3-2: new full speed USB device using ohci_hcd and address 3
usb 3-2: configuration #1 chosen from 1 choice
usb 3-3: new full speed USB device using ohci_hcd and address 4
usb 3-3: configuration #1 chosen from 1 choice
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usbcore: registered new interface driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
pnp: the driver 'i8042 kbd' has been registered
pnp: match found with the PnP device '00:07' and the driver 'i8042 kbd'
pnp: the driver 'i8042 aux' has been registered
pnp: match found with the PnP device '00:06' and the driver 'i8042 aux'
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
gameport: EMU10K1 is pci0000:00:0c.1/gameport0, io 0xdc00, speed 1217kHz
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard as /class/input/input2
input: PS2++ Logitech MX Mouse as /class/input/input3
i2c /dev entries driver
i2c-core: driver [dev_driver] registered
i2c_adapter i2c-9191: ISA main adapter registered
sis96x_smbus 0000:00:02.1: SiS96x SMBus base address: 0x0c00
i2c_adapter i2c-0: adapter [SiS96x SMBus adapter at 0x0c00] registered
i2c-dev: adapter [SiS96x SMBus adapter at 0x0c00] registered as minor 0
device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
Advanced Linux Sound Architecture Driver Version 1.0.14rc1 (Tue Jan 09 09:56:17 2007 UTC).
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
ACPI: PCI Interrupt 0000:00:0c.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
ALSA device list:
#0: SB Live 5.1 [SB0220] (rev.10, serial:0x80651102) at 0xd400, irq 11
TCP cubic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
ieee80211: 802.11 data/management/control stack, git-1.1.13
ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
ieee80211_crypt: registered algorithm 'NULL'
ieee80211_crypt: registered algorithm 'WEP'
ieee80211_crypt: registered algorithm 'CCMP'
ieee80211_crypt: registered algorithm 'TKIP'
Using IPI Shortcut mode
BIOS EDD facility v0.16 2004-Jun-25, 2 devices found
Time: tsc clocksource has been installed.
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 296k freed
EXT3 FS on hdb1, internal journal
kjournald starting. Commit interval 5 seconds
EXT3 FS on hdb2, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
eth0: Media Link On 10mbps full-duplex
usb 3-3: USB disconnect, address 4
usb 3-3: new full speed USB device using ohci_hcd and address 5
usb 3-3: configuration #1 chosen from 1 choice
ath_hal: module license 'Proprietary' taints kernel.
ath_hal: 0.9.18.0 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
wlan: 0.8.4.2 (svn r2162)
ath_pci: 0.9.4.5 (svn r2162)
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10
ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
ath_rate_sample: 1.2 (svn r2162)
wifi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
wifi0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
wifi0: H/W encryption support: WEP AES AES_CCM TKIP
wifi0: mac 5.6 phy 4.1 radio 1.7
wifi0: Use hw queue 1 for WME_AC_BE traffic
wifi0: Use hw queue 0 for WME_AC_BK traffic
wifi0: Use hw queue 2 for WME_AC_VI traffic
wifi0: Use hw queue 3 for WME_AC_VO traffic
wifi0: Use hw queue 8 for CAB traffic
wifi0: Use hw queue 9 for beacons
wifi0: Atheros 5212: mem=0xcffe0000, irq=10
rechte von den audio devices
bash-3.00# ls -la /dev/snd/ /dev/sound /dev/dsp
lrwxrwxrwx 1 root root 9 Feb 28 18:29 /dev/dsp -> sound/dsp
/dev/snd/:
total 0
drwxr-xr-x 2 root root 320 Feb 28 18:29 .
drwxr-xr-x 22 root root 4220 Feb 28 18:32 ..
crwxrw-rw- 1 root audio 116, 0 Feb 28 18:29 controlC0
crwxrw-rw- 1 root audio 116, 4 Feb 28 18:29 hwC0D0
crwxrw-rw- 1 root audio 116, 6 Feb 28 18:29 hwC0D2
crwxrw-rw- 1 root audio 116, 8 Feb 28 18:29 midiC0D0
crwxrw-rw- 1 root audio 116, 9 Feb 28 18:29 midiC0D1
crwxrw-rw- 1 root audio 116, 10 Feb 28 18:29 midiC0D2
crwxrw-rw- 1 root audio 116, 24 Feb 28 18:29 pcmC0D0c
crwxrw-rw- 1 root audio 116, 16 Feb 28 18:29 pcmC0D0p
crwxrw-rw- 1 root audio 116, 25 Feb 28 18:29 pcmC0D1c
crwxrw-rw- 1 root audio 116, 26 Feb 28 18:29 pcmC0D2c
crwxrw-rw- 1 root audio 116, 18 Feb 28 18:29 pcmC0D2p
crwxrw-rw- 1 root audio 116, 19 Feb 28 18:29 pcmC0D3p
crwxrw-rw- 1 root audio 116, 1 Feb 28 18:29 seq
crwxrw-rw- 1 root audio 116, 33 Feb 28 18:29 timer
/dev/sound:
total 0
drwxr-xr-x 2 root root 160 Feb 28 18:29 .
drwxr-xr-x 22 root root 4220 Feb 28 18:32 ..
crwxrw-rw- 1 root audio 14, 12 Feb 28 18:29 adsp
crwxrw-rw- 1 root audio 14, 4 Feb 28 18:29 audio
crwxrw-rw- 1 root audio 14, 3 Feb 28 18:29 dsp
crwxrw-rw- 1 root audio 14, 0 Feb 28 18:29 mixer
crwxrw-rw- 1 root audio 14, 1 Feb 28 18:29 sequencer
crwxrw-rw- 1 root audio 14, 8 Feb 28 18:29 sequencer2
nun eine ausgabe mit oss emulation, welche wunderbar funktioniert:
bash-3.00# strace -e trace=open mplayer -ao oss /mnt/hda5/Musik/Agonoize\ -\ Koprolalie.mp3
open("/etc/ld.so.cache", O_RDONLY) = 3
open("/usr/lib/libpng.so.3", O_RDONLY) = 3
open("/usr/lib/libz.so.1", O_RDONLY) = 3
open("/usr/lib/libjpeg.so.62", O_RDONLY) = 3
open("/usr/lib/libmp3lame.so.0", O_RDONLY) = 3
open("/lib/libncurses.so.5", O_RDONLY) = 3
open("/lib/libpthread.so.0", O_RDONLY) = 3
open("/lib/libdl.so.2", O_RDONLY) = 3
open("/lib/libm.so.6", O_RDONLY) = 3
open("/usr/lib/libfontconfig.so.1", O_RDONLY) = 3
open("/usr/lib/libfreetype.so.6", O_RDONLY) = 3
open("/usr/X11R6/lib/libGL.so.1", O_RDONLY) = 3
open("/usr/X11R6/lib/libXxf86dga.so.1", O_RDONLY) = 3
open("/usr/X11R6/lib/libXv.so.1", O_RDONLY) = 3
open("/usr/X11R6/lib/libXxf86vm.so.1", O_RDONLY) = 3
open("/usr/X11R6/lib/libXinerama.so.1", O_RDONLY) = 3
open("/usr/X11R6/lib/libXext.so.6", O_RDONLY) = 3
open("/usr/X11R6/lib/libX11.so.6", O_RDONLY) = 3
open("/lib/libc.so.6", O_RDONLY) = 3
open("/usr/lib/libexpat.so.0", O_RDONLY) = 3
open("/usr/lib/gconv/gconv-modules.cache", O_RDONLY) = -1 ENOENT (No such file or directory)
open("/usr/lib/gconv/gconv-modules", O_RDONLY) = 3
MPlayer 1.0rc1-4.0.3 (C) 2000-2006 MPlayer Team
CPU: AMD Athlon(tm) XP 2600+ (Family: 6, Model: 10, Stepping: 0)
CPUflags: MMX: 1 MMX2: 1 3DNow: 1 3DNow2: 1 SSE: 1 SSE2: 0
Compiled for x86 CPU with extensions: MMX MMX2 3DNow 3DNowEx SSE
open("/usr/etc/mplayer/mplayer.conf", O_RDONLY|O_LARGEFILE) = 3
open("/root/.mplayer/config", O_WRONLY|O_CREAT|O_EXCL|O_LARGEFILE, 0666) = -1 EEXIST (File exists)
open("/root/.mplayer/config", O_RDONLY|O_LARGEFILE) = 3
open("/root/.mplayer/codecs.conf", O_RDONLY|O_LARGEFILE) = -1 ENOENT (No such file or directory)
open("/usr/etc/mplayer/codecs.conf", O_RDONLY|O_LARGEFILE) = -1 ENOENT (No such file or directory)
open("/root/.mplayer/font/font.desc", O_RDONLY|O_LARGEFILE) = -1 ENOENT (No such file or directory)
open("/usr/share/mplayer/font/font.desc", O_RDONLY|O_LARGEFILE) = 3
open("/usr/share/mplayer/font//iso-8859-1-a.raw", O_RDONLY|O_LARGEFILE) = 4
open("/usr/share/mplayer/font//iso-8859-1-b.raw", O_RDONLY|O_LARGEFILE) = 4
open("/usr/share/mplayer/font//osd-mplayer-a.raw", O_RDONLY|O_LARGEFILE) = 4
open("/usr/share/mplayer/font//osd-mplayer-b.raw", O_RDONLY|O_LARGEFILE) = 4
open("/usr/share/terminfo/r/rxvt", O_RDONLY|O_LARGEFILE) = 3
open("/root/.mplayer/input.conf", O_RDONLY|O_LARGEFILE) = -1 ENOENT (No such file or directory)
open("/usr/etc/mplayer/input.conf", O_RDONLY|O_LARGEFILE) = 3
Playing /mnt/hda5/Musik/Agonoize - Koprolalie.mp3.
open("/mnt/hda5/Musik/Agonoize - Koprolalie.ifo", O_RDONLY|O_LARGEFILE) = -1 ENOENT (No such file or directory)
open("/mnt/hda5/Musik/Agonoize - Koprolalie.rar", O_RDONLY|O_LARGEFILE) = -1 ENOENT (No such file or directory)
open("/mnt/hda5/Musik/Agonoize - Koprolalie.rar", O_RDONLY|O_LARGEFILE) = -1 ENOENT (No such file or directory)
open("/mnt/hda5/Musik/Agonoize - Koprolalie.idx", O_RDONLY|O_LARGEFILE) = -1 ENOENT (No such file or directory)
open("/mnt/hda5/Musik/Agonoize - Koprolalie.rar", O_RDONLY|O_LARGEFILE) = -1 ENOENT (No such file or directory)
open("/mnt/hda5/Musik/Agonoize - Koprolalie.rar", O_RDONLY|O_LARGEFILE) = -1 ENOENT (No such file or directory)
open("/root/.mplayer/sub/Agonoize - Koprolalie.ifo", O_RDONLY|O_LARGEFILE) = -1 ENOENT (No such file or directory)
open("/root/.mplayer/sub/Agonoize - Koprolalie.rar", O_RDONLY|O_LARGEFILE) = -1 ENOENT (No such file or directory)
open("/root/.mplayer/sub/Agonoize - Koprolalie.rar", O_RDONLY|O_LARGEFILE) = -1 ENOENT (No such file or directory)
open("/root/.mplayer/sub/Agonoize - Koprolalie.idx", O_RDONLY|O_LARGEFILE) = -1 ENOENT (No such file or directory)
open("/root/.mplayer/sub/Agonoize - Koprolalie.rar", O_RDONLY|O_LARGEFILE) = -1 ENOENT (No such file or directory)
open("/root/.mplayer/sub/Agonoize - Koprolalie.rar", O_RDONLY|O_LARGEFILE) = -1 ENOENT (No such file or directory)
open("/mnt/hda5/Musik/Agonoize - Koprolalie.mp3", O_RDONLY|O_LARGEFILE) = 3
Cache fill: 4.00% (335872 bytes)
Audio file file format detected.
================================================== ========================
Opening audio decoder: [mp3lib] MPEG layer-2, layer-3
AUDIO: 44100 Hz, 2 ch, s16le, 192.0 kbit/13.61% (ratio: 24000->176400)
Selected audio codec: [mp3] afm: mp3lib (mp3lib MPEG layer-2, layer-3)
================================================== ========================
open("/dev/dsp", O_WRONLY|O_NONBLOCK|O_LARGEFILE) = 4
AO: [oss] 44100Hz 2ch s16le (2 bytes per sample)
Video: no video
Starting playback...
A: 4.8 (04.8) of 290.0 (04:50.0) 0.6% 81%
MPlayer interrupted by signal 2 in module: enable_cache
MPlayer interrupted by signal 15 in module: play_audio
und nun die verflixte alsa ausgabe aus der ich nicht schlau werde
bash-3.00# strace -e trace=open mplayer -ao alsa /mnt/hda5/Musik/Agonoize\ -\ Koprolalie.mp3
open("/etc/ld.so.cache", O_RDONLY) = 3
open("/usr/lib/libpng.so.3", O_RDONLY) = 3
open("/usr/lib/libz.so.1", O_RDONLY) = 3
open("/usr/lib/libjpeg.so.62", O_RDONLY) = 3
open("/usr/lib/libmp3lame.so.0", O_RDONLY) = 3
open("/lib/libncurses.so.5", O_RDONLY) = 3
open("/lib/libpthread.so.0", O_RDONLY) = 3
open("/lib/libdl.so.2", O_RDONLY) = 3
open("/lib/libm.so.6", O_RDONLY) = 3
open("/usr/lib/libfontconfig.so.1", O_RDONLY) = 3
open("/usr/lib/libfreetype.so.6", O_RDONLY) = 3
open("/usr/X11R6/lib/libGL.so.1", O_RDONLY) = 3
open("/usr/X11R6/lib/libXxf86dga.so.1", O_RDONLY) = 3
open("/usr/X11R6/lib/libXv.so.1", O_RDONLY) = 3
open("/usr/X11R6/lib/libXxf86vm.so.1", O_RDONLY) = 3
open("/usr/X11R6/lib/libXinerama.so.1", O_RDONLY) = 3
open("/usr/X11R6/lib/libXext.so.6", O_RDONLY) = 3
open("/usr/X11R6/lib/libX11.so.6", O_RDONLY) = 3
open("/lib/libc.so.6", O_RDONLY) = 3
open("/usr/lib/libexpat.so.0", O_RDONLY) = 3
open("/usr/lib/gconv/gconv-modules.cache", O_RDONLY) = -1 ENOENT (No such file or directory)
open("/usr/lib/gconv/gconv-modules", O_RDONLY) = 3
MPlayer 1.0rc1-4.0.3 (C) 2000-2006 MPlayer Team
CPU: AMD Athlon(tm) XP 2600+ (Family: 6, Model: 10, Stepping: 0)
CPUflags: MMX: 1 MMX2: 1 3DNow: 1 3DNow2: 1 SSE: 1 SSE2: 0
Compiled for x86 CPU with extensions: MMX MMX2 3DNow 3DNowEx SSE
open("/usr/etc/mplayer/mplayer.conf", O_RDONLY|O_LARGEFILE) = 3
open("/root/.mplayer/config", O_WRONLY|O_CREAT|O_EXCL|O_LARGEFILE, 0666) = -1 EEXIST (File exists)
open("/root/.mplayer/config", O_RDONLY|O_LARGEFILE) = 3
open("/root/.mplayer/codecs.conf", O_RDONLY|O_LARGEFILE) = -1 ENOENT (No such file or directory)
open("/usr/etc/mplayer/codecs.conf", O_RDONLY|O_LARGEFILE) = -1 ENOENT (No such file or directory)
open("/root/.mplayer/font/font.desc", O_RDONLY|O_LARGEFILE) = -1 ENOENT (No such file or directory)
open("/usr/share/mplayer/font/font.desc", O_RDONLY|O_LARGEFILE) = 3
open("/usr/share/mplayer/font//iso-8859-1-a.raw", O_RDONLY|O_LARGEFILE) = 4
open("/usr/share/mplayer/font//iso-8859-1-b.raw", O_RDONLY|O_LARGEFILE) = 4
open("/usr/share/mplayer/font//osd-mplayer-a.raw", O_RDONLY|O_LARGEFILE) = 4
open("/usr/share/mplayer/font//osd-mplayer-b.raw", O_RDONLY|O_LARGEFILE) = 4
open("/usr/share/terminfo/r/rxvt", O_RDONLY|O_LARGEFILE) = 3
open("/root/.mplayer/input.conf", O_RDONLY|O_LARGEFILE) = -1 ENOENT (No such file or directory)
open("/usr/etc/mplayer/input.conf", O_RDONLY|O_LARGEFILE) = 3
Playing /mnt/hda5/Musik/Agonoize - Koprolalie.mp3.
open("/mnt/hda5/Musik/Agonoize - Koprolalie.ifo", O_RDONLY|O_LARGEFILE) = -1 ENOENT (No such file or directory)
open("/mnt/hda5/Musik/Agonoize - Koprolalie.rar", O_RDONLY|O_LARGEFILE) = -1 ENOENT (No such file or directory)
open("/mnt/hda5/Musik/Agonoize - Koprolalie.rar", O_RDONLY|O_LARGEFILE) = -1 ENOENT (No such file or directory)
open("/mnt/hda5/Musik/Agonoize - Koprolalie.idx", O_RDONLY|O_LARGEFILE) = -1 ENOENT (No such file or directory)
open("/mnt/hda5/Musik/Agonoize - Koprolalie.rar", O_RDONLY|O_LARGEFILE) = -1 ENOENT (No such file or directory)
open("/mnt/hda5/Musik/Agonoize - Koprolalie.rar", O_RDONLY|O_LARGEFILE) = -1 ENOENT (No such file or directory)
open("/root/.mplayer/sub/Agonoize - Koprolalie.ifo", O_RDONLY|O_LARGEFILE) = -1 ENOENT (No such file or directory)
open("/root/.mplayer/sub/Agonoize - Koprolalie.rar", O_RDONLY|O_LARGEFILE) = -1 ENOENT (No such file or directory)
open("/root/.mplayer/sub/Agonoize - Koprolalie.rar", O_RDONLY|O_LARGEFILE) = -1 ENOENT (No such file or directory)
open("/root/.mplayer/sub/Agonoize - Koprolalie.idx", O_RDONLY|O_LARGEFILE) = -1 ENOENT (No such file or directory)
open("/root/.mplayer/sub/Agonoize - Koprolalie.rar", O_RDONLY|O_LARGEFILE) = -1 ENOENT (No such file or directory)
open("/root/.mplayer/sub/Agonoize - Koprolalie.rar", O_RDONLY|O_LARGEFILE) = -1 ENOENT (No such file or directory)
open("/mnt/hda5/Musik/Agonoize - Koprolalie.mp3", O_RDONLY|O_LARGEFILE) = 3
Audio file file format detected.
================================================== ========================
Opening audio decoder: [mp3lib] MPEG layer-2, layer-3
AUDIO: 44100 Hz, 2 ch, s16le, 192.0 kbit/13.61% (ratio: 24000->176400)
Selected audio codec: [mp3] afm: mp3lib (mp3lib MPEG layer-2, layer-3)
================================================== ========================
Could not open/initialize audio device -> no sound.
Audio: no sound
Video: no video
--- SIGCHLD (Child exited) @ 0 (0) ---
Exiting... (End of file)
Process 6054 detached
bash-3.00$ cat /proc/asound/version
Advanced Linux Sound Architecture Driver Version 1.0.14rc1 (Tue Jan 09 09:56:17 2007 UTC).
bash-3.00$ cat /proc/asound/cards
0 [Live ]: EMU10K1 - SB Live 5.1 [SB0220]
SB Live 5.1 [SB0220] (rev.10, serial:0x80651102) at 0xd400, irq 11
Hallo, ich habe ein Problem, und hoffe nun bei der diagnose nichts zu vergessen:
Ich habe alsa fest in dem 2.6.20.1er Kernel eingebaut, jedoch habe ich nun ein kleines Problem: Die Alsa ausgabe funktioniert nicht, die OSS emulationhingegen jedoch tadellos, ich verwende eine Soundblaster Live 5.1 Digital mit emu10k1 chipsatz Hardware mixing unterstützt - und somit kein Soudnserver.
Apropro System ist ein gester Frisch aufgestztes Crux 2.2
hier ein paar ausgaben:
bash-3.00# dmesg
und SMP MP-table at 000fbc70
Entering add_active_range(0, 0, 196592) 0 entries of 256 used
Zone PFN ranges:
DMA 0 -> 4096
Normal 4096 -> 196592
HighMem 196592 -> 196592
early_node_map[1] active PFN ranges
0: 0 -> 196592
On node 0 totalpages: 196592
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 4064 pages, LIFO batch:0
Normal zone: 1503 pages used for memmap
Normal zone: 190993 pages, LIFO batch:31
HighMem zone: 0 pages used for memmap
DMI 2.3 present.
ACPI: RSDP (v000 AMI ) @ 0x000fab70
ACPI: RSDT (v001 AMIINT SiS740XX 0x00001000 MSFT 0x0100000b) @ 0x2fff0000
ACPI: FADT (v001 AMIINT SiS740XX 0x00000011 MSFT 0x0100000b) @ 0x2fff0030
ACPI: MADT (v001 AMIINT SiS740XX 0x00001000 MSFT 0x0100000b) @ 0x2fff00c0
ACPI: DSDT (v001 SiS 748 0x00000100 MSFT 0x0100000d) @ 0x00000000
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Processor #0 6:10 APIC version 16
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
Using ACPI for processor (LAPIC) configuration information
Intel MultiProcessor Specification v1.4
Virtual Wire compatibility mode.
OEM ID: SiS Product ID: 748 APIC at: 0xFEE00000
I/O APIC #2 Version 17 at 0xFEC00000.
Enabling APIC mode: Flat. Using 1 I/O APICs
Processors: 1
Allocating PCI resources starting at 40000000 (gap: 30000000:cec00000)
Detected 2032.837 MHz processor.
Built 1 zonelists. Total pages: 195057
Kernel command line: BOOT_IMAGE=CRUX-2.6.20.1 ro root=341
mapped APIC to ffffd000 (fee00000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 16384 bytes)
Console: colour dummy device 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 773328k/786368k available (3621k kernel code, 12500k reserved, 1337k data, 296k init, 0k highmem)
virtual kernel memory layout:
fixmap : 0xfffea000 - 0xfffff000 ( 84 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xf0800000 - 0xff7fe000 ( 239 MB)
lowmem : 0xc0000000 - 0xefff0000 ( 767 MB)
.init : 0xc05da000 - 0xc0624000 ( 296 kB)
.data : 0xc04897e4 - 0xc05d7c94 (1337 kB)
.text : 0xc0100000 - 0xc04897e4 (3621 kB)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 4067.44 BogoMIPS (lpj=8134887)
Mount-cache hash table entries: 512
CPU: After generic identify, caps: 0383fbff c1c3fbff 00000000 00000000 00000000 00000000 00000000
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU: After all inits, caps: 0383fbff c1c3fbff 00000000 00000420 00000000 00000000 00000000
Compat vDSO mapped to ffffe000.
CPU: AMD Athlon(tm) XP 2600+ stepping 00
Checking 'hlt' instruction... OK.
ACPI: Core revision 20060707
ACPI: setting ELCR to 0200 (from 0c08)
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xfdb31, last bus=2
PCI: Using configuration type 1
Setting up standard PCI resources
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
Uncovering SIS963 that hid as a SIS503 (compatible=0)
Enabling SiS 96x SMBus.
Boot video device is 0000:01:00.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: Power Resource [URP1] (off)
ACPI: Power Resource [URP2] (off)
ACPI: Power Resource [FDDP] (off)
ACPI: Power Resource [LPTP] (off)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *10 11 12 14 15)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: ACPI device : hid PNP0A03
pnp: ACPI device : hid PNP0C02
pnp: ACPI device : hid PNP0200
pnp: ACPI device : hid PNP0B00
pnp: ACPI device : hid PNP0800
pnp: ACPI device : hid PNP0C04
pnp: ACPI device : hid PNP0F03
pnp: ACPI device : hid PNP0303
pnp: ACPI device : hid PNP0700
pnp: ACPI device : hid PNP0501
pnp: ACPI device : hid PNP0401
pnp: ACPI device : hid PNPB02F
pnp: PnP ACPI: found 12 devices
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
pnp: the driver 'system' has been registered
pnp: match found with the PnP device '00:01' and the driver 'system'
PCI: Bridge: 0000:00:01.0
IO window: disabled.
MEM window: cdd00000-cfefffff
PREFETCH window: bd900000-cdbfffff
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 7, 524288 bytes)
TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
microcode: CPU0 not a capable Intel processor
IA-32 Microcode Update Driver: v1.14a <tigran@aivazian.fsnet.co.uk>
fuse init (API version 7.8)
io scheduler noop registered
io scheduler anticipatory registered (default)
io scheduler deadline registered
io scheduler cfq registered
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
vesafb: framebuffer at 0xc0000000, mapped to 0xf0880000, using 3072k, total 131072k
vesafb: mode is 1024x768x16, linelength=2048, pages=1
vesafb: protected mode interface info at c000:e910
vesafb: pmi: set display start = c00ce955, set palette = c00ce9da
vesafb: pmi: ports = b4c3 b503 ba03 c003 c103 c403 c503 c603 c703 c803 c903 cc03 ce03 cf03 d003 d103 d203 d303 d403 d503 da03 ff03
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
Console: switching to colour frame buffer device 128x48
fb0: VESA VGA frame buffer device
input: Power Button (FF) as /class/input/input0
ACPI: Power Button (FF) [PWRF]
input: Power Button (CM) as /class/input/input1
ACPI: Power Button (CM) [PWRB]
Using specific hotkey driver
Generic RTC Driver v1.07
Non-volatile memory driver v1.2
Linux agpgart interface v0.101 (c) Dave Jones
agpgart: Detected SiS 746 chipset
agpgart: AGP aperture is 64M @ 0xd0000000
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
pnp: the driver 'serial' has been registered
pnp: match found with the PnP device '00:09' and the driver 'serial'
00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
pnp: the driver 'parport_pc' has been registered
pnp: match found with the PnP device '00:0a' and the driver 'parport_pc'
parport: PnPBIOS parport detected.
parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP(,...)]
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
loop: loaded (max 8 devices)
Compaq SMART2 Driver (v 2.6.0)
HP CISS Driver (v 3.6.14)
usbcore: registered new interface driver ub
sis900.c: v1.08.10 Apr. 2 2006
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
ACPI: PCI Interrupt 0000:00:04.0[A] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
0000:00:04.0: Realtek RTL8201 PHY transceiver found at address 1.
0000:00:04.0: Using transceiver found at address 1 as default
eth0: SiS 900 PCI Fast Ethernet at 0xd800, IRQ 11, 00:0b:6a:2a:3c:bb.
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
SIS5513: IDE controller at PCI slot 0000:00:02.5
SIS5513: chipset revision 0
SIS5513: not 100% native mode: will probe irqs later
SIS5513: SiS 962/963 MuTIOL IDE UDMA133 controller
ide0: BM-DMA at 0xff00-0xff07, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0xff08-0xff0f, BIOS settings: hdc:DMA, hdd:DMA
Probing IDE interface ide0...
hda: Maxtor 6Y120P0, ATA DISK drive
hdb: IC35L060AVER07-0, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdc: TOSHIBA DVD-ROM SD-M1612, ATAPI CD/DVD-ROM drive
hdd: PLEXTOR CD-R PX-W5224A, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 128KiB
hda: 234375000 sectors (120000 MB) w/7936KiB Cache, CHS=65535/16/63, UDMA(133)
hda: cache flushes supported
hda: hda1 hda2 < hda5 >
hdb: max request size: 128KiB
hdb: 120103200 sectors (61492 MB) w/1916KiB Cache, CHS=65535/16/63, UDMA(100)
hdb: cache flushes not supported
hdb: hdb1 hdb2 hdb3
hdc: ATAPI 48X DVD-ROM drive, 512kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
hdd: ATAPI 40X CD-ROM CD-R/RW drive, 2048kB Cache, DMA
Loading Adaptec I2O RAID: Version 2.4 Build 5go
Detecting Adaptec I2O RAID controllers...
Adaptec aacraid driver (1.1-5[2423]-mh3)
DC390: clustering now enabled by default. If you get problems load
with "disable_clustering=1" and report to maintainers
megasas: 00.00.03.05 Mon Oct 02 11:21:32 PDT 2006
GDT-HA: Storage RAID Controller Driver. Version: 3.05
GDT-HA: Found 0 PCI Storage RAID Controllers
3ware Storage Controller device driver for Linux v1.26.02.002.
3ware 9000 Storage Controller device driver for Linux v2.26.02.008.
nsp32: loading...
aoe: AoE v32 initialised.
ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 10
PCI: setting IRQ 10 as level-triggered
ACPI: PCI Interrupt 0000:00:03.2[D] -> Link [LNKH] -> GSI 10 (level, low) -> IRQ 10
ehci_hcd 0000:00:03.2: EHCI Host Controller
ehci_hcd 0000:00:03.2: new USB bus registered, assigned bus number 1
PCI: cache line size of 64 is not supported by device 0000:00:03.2
ehci_hcd 0000:00:03.2: irq 10, io mem 0xcffff000
ehci_hcd 0000:00:03.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 11
ACPI: PCI Interrupt 0000:00:03.0[A] -> Link [LNKE] -> GSI 11 (level, low) -> IRQ 11
ohci_hcd 0000:00:03.0: OHCI Host Controller
ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:03.0: irq 11, io mem 0xcfffd000
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 3 ports detected
ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 3
PCI: setting IRQ 3 as level-triggered
ACPI: PCI Interrupt 0000:00:03.1[B] -> Link [LNKF] -> GSI 3 (level, low) -> IRQ 3
ohci_hcd 0000:00:03.1: OHCI Host Controller
ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 3
ohci_hcd 0000:00:03.1: irq 3, io mem 0xcfffe000
usb 1-1: new high speed USB device using ehci_hcd and address 2
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 3 ports detected
usb 1-1: configuration #1 chosen from 1 choice
Initializing USB Mass Storage driver...
usb 1-3: new high speed USB device using ehci_hcd and address 4
usb 1-3: configuration #1 chosen from 1 choice
uba: uba1
usb 3-1: new full speed USB device using ohci_hcd and address 2
usb 3-1: configuration #1 chosen from 1 choice
usb 3-2: new full speed USB device using ohci_hcd and address 3
usb 3-2: configuration #1 chosen from 1 choice
usb 3-3: new full speed USB device using ohci_hcd and address 4
usb 3-3: configuration #1 chosen from 1 choice
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usbcore: registered new interface driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
pnp: the driver 'i8042 kbd' has been registered
pnp: match found with the PnP device '00:07' and the driver 'i8042 kbd'
pnp: the driver 'i8042 aux' has been registered
pnp: match found with the PnP device '00:06' and the driver 'i8042 aux'
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
gameport: EMU10K1 is pci0000:00:0c.1/gameport0, io 0xdc00, speed 1217kHz
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard as /class/input/input2
input: PS2++ Logitech MX Mouse as /class/input/input3
i2c /dev entries driver
i2c-core: driver [dev_driver] registered
i2c_adapter i2c-9191: ISA main adapter registered
sis96x_smbus 0000:00:02.1: SiS96x SMBus base address: 0x0c00
i2c_adapter i2c-0: adapter [SiS96x SMBus adapter at 0x0c00] registered
i2c-dev: adapter [SiS96x SMBus adapter at 0x0c00] registered as minor 0
device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
Advanced Linux Sound Architecture Driver Version 1.0.14rc1 (Tue Jan 09 09:56:17 2007 UTC).
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
ACPI: PCI Interrupt 0000:00:0c.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
ALSA device list:
#0: SB Live 5.1 [SB0220] (rev.10, serial:0x80651102) at 0xd400, irq 11
TCP cubic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
ieee80211: 802.11 data/management/control stack, git-1.1.13
ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
ieee80211_crypt: registered algorithm 'NULL'
ieee80211_crypt: registered algorithm 'WEP'
ieee80211_crypt: registered algorithm 'CCMP'
ieee80211_crypt: registered algorithm 'TKIP'
Using IPI Shortcut mode
BIOS EDD facility v0.16 2004-Jun-25, 2 devices found
Time: tsc clocksource has been installed.
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 296k freed
EXT3 FS on hdb1, internal journal
kjournald starting. Commit interval 5 seconds
EXT3 FS on hdb2, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
eth0: Media Link On 10mbps full-duplex
usb 3-3: USB disconnect, address 4
usb 3-3: new full speed USB device using ohci_hcd and address 5
usb 3-3: configuration #1 chosen from 1 choice
ath_hal: module license 'Proprietary' taints kernel.
ath_hal: 0.9.18.0 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
wlan: 0.8.4.2 (svn r2162)
ath_pci: 0.9.4.5 (svn r2162)
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10
ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
ath_rate_sample: 1.2 (svn r2162)
wifi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
wifi0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
wifi0: H/W encryption support: WEP AES AES_CCM TKIP
wifi0: mac 5.6 phy 4.1 radio 1.7
wifi0: Use hw queue 1 for WME_AC_BE traffic
wifi0: Use hw queue 0 for WME_AC_BK traffic
wifi0: Use hw queue 2 for WME_AC_VI traffic
wifi0: Use hw queue 3 for WME_AC_VO traffic
wifi0: Use hw queue 8 for CAB traffic
wifi0: Use hw queue 9 for beacons
wifi0: Atheros 5212: mem=0xcffe0000, irq=10
rechte von den audio devices
bash-3.00# ls -la /dev/snd/ /dev/sound /dev/dsp
lrwxrwxrwx 1 root root 9 Feb 28 18:29 /dev/dsp -> sound/dsp
/dev/snd/:
total 0
drwxr-xr-x 2 root root 320 Feb 28 18:29 .
drwxr-xr-x 22 root root 4220 Feb 28 18:32 ..
crwxrw-rw- 1 root audio 116, 0 Feb 28 18:29 controlC0
crwxrw-rw- 1 root audio 116, 4 Feb 28 18:29 hwC0D0
crwxrw-rw- 1 root audio 116, 6 Feb 28 18:29 hwC0D2
crwxrw-rw- 1 root audio 116, 8 Feb 28 18:29 midiC0D0
crwxrw-rw- 1 root audio 116, 9 Feb 28 18:29 midiC0D1
crwxrw-rw- 1 root audio 116, 10 Feb 28 18:29 midiC0D2
crwxrw-rw- 1 root audio 116, 24 Feb 28 18:29 pcmC0D0c
crwxrw-rw- 1 root audio 116, 16 Feb 28 18:29 pcmC0D0p
crwxrw-rw- 1 root audio 116, 25 Feb 28 18:29 pcmC0D1c
crwxrw-rw- 1 root audio 116, 26 Feb 28 18:29 pcmC0D2c
crwxrw-rw- 1 root audio 116, 18 Feb 28 18:29 pcmC0D2p
crwxrw-rw- 1 root audio 116, 19 Feb 28 18:29 pcmC0D3p
crwxrw-rw- 1 root audio 116, 1 Feb 28 18:29 seq
crwxrw-rw- 1 root audio 116, 33 Feb 28 18:29 timer
/dev/sound:
total 0
drwxr-xr-x 2 root root 160 Feb 28 18:29 .
drwxr-xr-x 22 root root 4220 Feb 28 18:32 ..
crwxrw-rw- 1 root audio 14, 12 Feb 28 18:29 adsp
crwxrw-rw- 1 root audio 14, 4 Feb 28 18:29 audio
crwxrw-rw- 1 root audio 14, 3 Feb 28 18:29 dsp
crwxrw-rw- 1 root audio 14, 0 Feb 28 18:29 mixer
crwxrw-rw- 1 root audio 14, 1 Feb 28 18:29 sequencer
crwxrw-rw- 1 root audio 14, 8 Feb 28 18:29 sequencer2
nun eine ausgabe mit oss emulation, welche wunderbar funktioniert:
bash-3.00# strace -e trace=open mplayer -ao oss /mnt/hda5/Musik/Agonoize\ -\ Koprolalie.mp3
open("/etc/ld.so.cache", O_RDONLY) = 3
open("/usr/lib/libpng.so.3", O_RDONLY) = 3
open("/usr/lib/libz.so.1", O_RDONLY) = 3
open("/usr/lib/libjpeg.so.62", O_RDONLY) = 3
open("/usr/lib/libmp3lame.so.0", O_RDONLY) = 3
open("/lib/libncurses.so.5", O_RDONLY) = 3
open("/lib/libpthread.so.0", O_RDONLY) = 3
open("/lib/libdl.so.2", O_RDONLY) = 3
open("/lib/libm.so.6", O_RDONLY) = 3
open("/usr/lib/libfontconfig.so.1", O_RDONLY) = 3
open("/usr/lib/libfreetype.so.6", O_RDONLY) = 3
open("/usr/X11R6/lib/libGL.so.1", O_RDONLY) = 3
open("/usr/X11R6/lib/libXxf86dga.so.1", O_RDONLY) = 3
open("/usr/X11R6/lib/libXv.so.1", O_RDONLY) = 3
open("/usr/X11R6/lib/libXxf86vm.so.1", O_RDONLY) = 3
open("/usr/X11R6/lib/libXinerama.so.1", O_RDONLY) = 3
open("/usr/X11R6/lib/libXext.so.6", O_RDONLY) = 3
open("/usr/X11R6/lib/libX11.so.6", O_RDONLY) = 3
open("/lib/libc.so.6", O_RDONLY) = 3
open("/usr/lib/libexpat.so.0", O_RDONLY) = 3
open("/usr/lib/gconv/gconv-modules.cache", O_RDONLY) = -1 ENOENT (No such file or directory)
open("/usr/lib/gconv/gconv-modules", O_RDONLY) = 3
MPlayer 1.0rc1-4.0.3 (C) 2000-2006 MPlayer Team
CPU: AMD Athlon(tm) XP 2600+ (Family: 6, Model: 10, Stepping: 0)
CPUflags: MMX: 1 MMX2: 1 3DNow: 1 3DNow2: 1 SSE: 1 SSE2: 0
Compiled for x86 CPU with extensions: MMX MMX2 3DNow 3DNowEx SSE
open("/usr/etc/mplayer/mplayer.conf", O_RDONLY|O_LARGEFILE) = 3
open("/root/.mplayer/config", O_WRONLY|O_CREAT|O_EXCL|O_LARGEFILE, 0666) = -1 EEXIST (File exists)
open("/root/.mplayer/config", O_RDONLY|O_LARGEFILE) = 3
open("/root/.mplayer/codecs.conf", O_RDONLY|O_LARGEFILE) = -1 ENOENT (No such file or directory)
open("/usr/etc/mplayer/codecs.conf", O_RDONLY|O_LARGEFILE) = -1 ENOENT (No such file or directory)
open("/root/.mplayer/font/font.desc", O_RDONLY|O_LARGEFILE) = -1 ENOENT (No such file or directory)
open("/usr/share/mplayer/font/font.desc", O_RDONLY|O_LARGEFILE) = 3
open("/usr/share/mplayer/font//iso-8859-1-a.raw", O_RDONLY|O_LARGEFILE) = 4
open("/usr/share/mplayer/font//iso-8859-1-b.raw", O_RDONLY|O_LARGEFILE) = 4
open("/usr/share/mplayer/font//osd-mplayer-a.raw", O_RDONLY|O_LARGEFILE) = 4
open("/usr/share/mplayer/font//osd-mplayer-b.raw", O_RDONLY|O_LARGEFILE) = 4
open("/usr/share/terminfo/r/rxvt", O_RDONLY|O_LARGEFILE) = 3
open("/root/.mplayer/input.conf", O_RDONLY|O_LARGEFILE) = -1 ENOENT (No such file or directory)
open("/usr/etc/mplayer/input.conf", O_RDONLY|O_LARGEFILE) = 3
Playing /mnt/hda5/Musik/Agonoize - Koprolalie.mp3.
open("/mnt/hda5/Musik/Agonoize - Koprolalie.ifo", O_RDONLY|O_LARGEFILE) = -1 ENOENT (No such file or directory)
open("/mnt/hda5/Musik/Agonoize - Koprolalie.rar", O_RDONLY|O_LARGEFILE) = -1 ENOENT (No such file or directory)
open("/mnt/hda5/Musik/Agonoize - Koprolalie.rar", O_RDONLY|O_LARGEFILE) = -1 ENOENT (No such file or directory)
open("/mnt/hda5/Musik/Agonoize - Koprolalie.idx", O_RDONLY|O_LARGEFILE) = -1 ENOENT (No such file or directory)
open("/mnt/hda5/Musik/Agonoize - Koprolalie.rar", O_RDONLY|O_LARGEFILE) = -1 ENOENT (No such file or directory)
open("/mnt/hda5/Musik/Agonoize - Koprolalie.rar", O_RDONLY|O_LARGEFILE) = -1 ENOENT (No such file or directory)
open("/root/.mplayer/sub/Agonoize - Koprolalie.ifo", O_RDONLY|O_LARGEFILE) = -1 ENOENT (No such file or directory)
open("/root/.mplayer/sub/Agonoize - Koprolalie.rar", O_RDONLY|O_LARGEFILE) = -1 ENOENT (No such file or directory)
open("/root/.mplayer/sub/Agonoize - Koprolalie.rar", O_RDONLY|O_LARGEFILE) = -1 ENOENT (No such file or directory)
open("/root/.mplayer/sub/Agonoize - Koprolalie.idx", O_RDONLY|O_LARGEFILE) = -1 ENOENT (No such file or directory)
open("/root/.mplayer/sub/Agonoize - Koprolalie.rar", O_RDONLY|O_LARGEFILE) = -1 ENOENT (No such file or directory)
open("/root/.mplayer/sub/Agonoize - Koprolalie.rar", O_RDONLY|O_LARGEFILE) = -1 ENOENT (No such file or directory)
open("/mnt/hda5/Musik/Agonoize - Koprolalie.mp3", O_RDONLY|O_LARGEFILE) = 3
Cache fill: 4.00% (335872 bytes)
Audio file file format detected.
================================================== ========================
Opening audio decoder: [mp3lib] MPEG layer-2, layer-3
AUDIO: 44100 Hz, 2 ch, s16le, 192.0 kbit/13.61% (ratio: 24000->176400)
Selected audio codec: [mp3] afm: mp3lib (mp3lib MPEG layer-2, layer-3)
================================================== ========================
open("/dev/dsp", O_WRONLY|O_NONBLOCK|O_LARGEFILE) = 4
AO: [oss] 44100Hz 2ch s16le (2 bytes per sample)
Video: no video
Starting playback...
A: 4.8 (04.8) of 290.0 (04:50.0) 0.6% 81%
MPlayer interrupted by signal 2 in module: enable_cache
MPlayer interrupted by signal 15 in module: play_audio
und nun die verflixte alsa ausgabe aus der ich nicht schlau werde
bash-3.00# strace -e trace=open mplayer -ao alsa /mnt/hda5/Musik/Agonoize\ -\ Koprolalie.mp3
open("/etc/ld.so.cache", O_RDONLY) = 3
open("/usr/lib/libpng.so.3", O_RDONLY) = 3
open("/usr/lib/libz.so.1", O_RDONLY) = 3
open("/usr/lib/libjpeg.so.62", O_RDONLY) = 3
open("/usr/lib/libmp3lame.so.0", O_RDONLY) = 3
open("/lib/libncurses.so.5", O_RDONLY) = 3
open("/lib/libpthread.so.0", O_RDONLY) = 3
open("/lib/libdl.so.2", O_RDONLY) = 3
open("/lib/libm.so.6", O_RDONLY) = 3
open("/usr/lib/libfontconfig.so.1", O_RDONLY) = 3
open("/usr/lib/libfreetype.so.6", O_RDONLY) = 3
open("/usr/X11R6/lib/libGL.so.1", O_RDONLY) = 3
open("/usr/X11R6/lib/libXxf86dga.so.1", O_RDONLY) = 3
open("/usr/X11R6/lib/libXv.so.1", O_RDONLY) = 3
open("/usr/X11R6/lib/libXxf86vm.so.1", O_RDONLY) = 3
open("/usr/X11R6/lib/libXinerama.so.1", O_RDONLY) = 3
open("/usr/X11R6/lib/libXext.so.6", O_RDONLY) = 3
open("/usr/X11R6/lib/libX11.so.6", O_RDONLY) = 3
open("/lib/libc.so.6", O_RDONLY) = 3
open("/usr/lib/libexpat.so.0", O_RDONLY) = 3
open("/usr/lib/gconv/gconv-modules.cache", O_RDONLY) = -1 ENOENT (No such file or directory)
open("/usr/lib/gconv/gconv-modules", O_RDONLY) = 3
MPlayer 1.0rc1-4.0.3 (C) 2000-2006 MPlayer Team
CPU: AMD Athlon(tm) XP 2600+ (Family: 6, Model: 10, Stepping: 0)
CPUflags: MMX: 1 MMX2: 1 3DNow: 1 3DNow2: 1 SSE: 1 SSE2: 0
Compiled for x86 CPU with extensions: MMX MMX2 3DNow 3DNowEx SSE
open("/usr/etc/mplayer/mplayer.conf", O_RDONLY|O_LARGEFILE) = 3
open("/root/.mplayer/config", O_WRONLY|O_CREAT|O_EXCL|O_LARGEFILE, 0666) = -1 EEXIST (File exists)
open("/root/.mplayer/config", O_RDONLY|O_LARGEFILE) = 3
open("/root/.mplayer/codecs.conf", O_RDONLY|O_LARGEFILE) = -1 ENOENT (No such file or directory)
open("/usr/etc/mplayer/codecs.conf", O_RDONLY|O_LARGEFILE) = -1 ENOENT (No such file or directory)
open("/root/.mplayer/font/font.desc", O_RDONLY|O_LARGEFILE) = -1 ENOENT (No such file or directory)
open("/usr/share/mplayer/font/font.desc", O_RDONLY|O_LARGEFILE) = 3
open("/usr/share/mplayer/font//iso-8859-1-a.raw", O_RDONLY|O_LARGEFILE) = 4
open("/usr/share/mplayer/font//iso-8859-1-b.raw", O_RDONLY|O_LARGEFILE) = 4
open("/usr/share/mplayer/font//osd-mplayer-a.raw", O_RDONLY|O_LARGEFILE) = 4
open("/usr/share/mplayer/font//osd-mplayer-b.raw", O_RDONLY|O_LARGEFILE) = 4
open("/usr/share/terminfo/r/rxvt", O_RDONLY|O_LARGEFILE) = 3
open("/root/.mplayer/input.conf", O_RDONLY|O_LARGEFILE) = -1 ENOENT (No such file or directory)
open("/usr/etc/mplayer/input.conf", O_RDONLY|O_LARGEFILE) = 3
Playing /mnt/hda5/Musik/Agonoize - Koprolalie.mp3.
open("/mnt/hda5/Musik/Agonoize - Koprolalie.ifo", O_RDONLY|O_LARGEFILE) = -1 ENOENT (No such file or directory)
open("/mnt/hda5/Musik/Agonoize - Koprolalie.rar", O_RDONLY|O_LARGEFILE) = -1 ENOENT (No such file or directory)
open("/mnt/hda5/Musik/Agonoize - Koprolalie.rar", O_RDONLY|O_LARGEFILE) = -1 ENOENT (No such file or directory)
open("/mnt/hda5/Musik/Agonoize - Koprolalie.idx", O_RDONLY|O_LARGEFILE) = -1 ENOENT (No such file or directory)
open("/mnt/hda5/Musik/Agonoize - Koprolalie.rar", O_RDONLY|O_LARGEFILE) = -1 ENOENT (No such file or directory)
open("/mnt/hda5/Musik/Agonoize - Koprolalie.rar", O_RDONLY|O_LARGEFILE) = -1 ENOENT (No such file or directory)
open("/root/.mplayer/sub/Agonoize - Koprolalie.ifo", O_RDONLY|O_LARGEFILE) = -1 ENOENT (No such file or directory)
open("/root/.mplayer/sub/Agonoize - Koprolalie.rar", O_RDONLY|O_LARGEFILE) = -1 ENOENT (No such file or directory)
open("/root/.mplayer/sub/Agonoize - Koprolalie.rar", O_RDONLY|O_LARGEFILE) = -1 ENOENT (No such file or directory)
open("/root/.mplayer/sub/Agonoize - Koprolalie.idx", O_RDONLY|O_LARGEFILE) = -1 ENOENT (No such file or directory)
open("/root/.mplayer/sub/Agonoize - Koprolalie.rar", O_RDONLY|O_LARGEFILE) = -1 ENOENT (No such file or directory)
open("/root/.mplayer/sub/Agonoize - Koprolalie.rar", O_RDONLY|O_LARGEFILE) = -1 ENOENT (No such file or directory)
open("/mnt/hda5/Musik/Agonoize - Koprolalie.mp3", O_RDONLY|O_LARGEFILE) = 3
Audio file file format detected.
================================================== ========================
Opening audio decoder: [mp3lib] MPEG layer-2, layer-3
AUDIO: 44100 Hz, 2 ch, s16le, 192.0 kbit/13.61% (ratio: 24000->176400)
Selected audio codec: [mp3] afm: mp3lib (mp3lib MPEG layer-2, layer-3)
================================================== ========================
Could not open/initialize audio device -> no sound.
Audio: no sound
Video: no video
--- SIGCHLD (Child exited) @ 0 (0) ---
Exiting... (End of file)
Process 6054 detached
bash-3.00$ cat /proc/asound/version
Advanced Linux Sound Architecture Driver Version 1.0.14rc1 (Tue Jan 09 09:56:17 2007 UTC).
bash-3.00$ cat /proc/asound/cards
0 [Live ]: EMU10K1 - SB Live 5.1 [SB0220]
SB Live 5.1 [SB0220] (rev.10, serial:0x80651102) at 0xd400, irq 11