Archiv verlassen und diese Seite im Standarddesign anzeigen : Kann ISO Datei nicht mounten
Ich mounte beim Systemstart (SuSE 10) einige CD Images (ISO Dateien) als Loopback Device mit folgenden Befehlen:
k=`expr $k + 1`
mkdir /mnt/Irgendwas &> /dev/null
mount -t iso9660 -o ro,loop=/dev/loop$k /divers/share/Irgendein.iso /mnt/Irgendwas
Das geht gut bis zur achten Imagedatei (wenn $k den Wert 7 hat). Beim 8. Image kommt dann folgende Fehlermeldung:
/dev/loop8: No such file or directory
Kann mir jemand helfen?
3.2. Creating the Loop Devices in /dev
The mknod command creates the devices in /dev. The loop devices have a major number of "7", and the minor numbers begin at "0". If your MAX_LOOP was defined as 8 in /usr/src/linux/drivers/block/loop.c, you should have loop0 thru loop7 in /dev. To create the /dev/loop8 device, use the following command (subsitute the appropriate number for the "8" in the example below).
mknod -m660 /dev/loop8 b 7 8
Check Owner/Group & Permissions on the new file. You can change the owner and group with the following command:
chown root.disk /dev/loop8
You can change the permissions using the following command:
chmod 666 /dev/loop8
Thank you for your tip!
I created the device with
mknod -m660 /dev/loop8 b 7 8
Now I get the message:
No such device or address
Dann musst du das Modul loop mit max_loop=xyz laden:
rmmod loop
modprobe loop max_loop=16
Dann meldet er
Mudule loop not found
Dann ist loop wohl fest im Kernel, also trag es in die /boot/grub/menu.lst ein.
Dann ist loop wohl fest im Kernel, also trag es in die /boot/grub/menu.lst ein.
Was soll ich da wo eintragen?
Ich sehe in /boot/grub/menu.lst nur folgendes:
# Modified by YaST2. Last modification on So Jun 25 21:44:36 CEST 2006
color white/blue black/light-gray
default 0
timeout 4
gfxmenu (hd0,1)/boot/message
###Don't change this comment - YaST2 identifier: Original name: linux###
title SUSE LINUX 10.0
root (hd0,1)
kernel /boot/vmlinuz root=/dev/md0 vga=788 selinux=0 resume=/dev/sda1 splash=silent showopts
initrd /boot/initrd
###Don't change this comment - YaST2 identifier: Original name: failsafe###
title Failsafe -- SUSE LINUX 10.0
root (hd0,1)
kernel /boot/vmlinuz root=/dev/md0 vga=normal showopts ide=nodma apm=off acpi=off noresume selinux=0 edd=off 3
initrd /boot/initrd
###Don't change this comment - YaST2 identifier: Original name: floppy###
title Diskette
chainloader (fd0)+1
kernel /boot/vmlinuz root=/dev/md0 vga=788 selinux=0 resume=/dev/sda1 splash=silent showopts max_loop=16
Versuchs mal so.
Powered by vBulletin® Version 4.2.5 Copyright ©2024 Adduco Digital e.K. und vBulletin Solutions, Inc. Alle Rechte vorbehalten.