linuxbaby
09.01.07, 13:55
Hallo
ich habe hier einen Server mit 2 NIC´s die wie folgt ausschauen
cat /etc/sysconfig/network-scripts/ifcfg-eth0
# Intel Corp.|82547GI Gigabit Ethernet Controller
DEVICE=eth0
BOOTPROTO=none
BROADCAST=80.88.194.255
HWADDR=00:30:48:88:35:1G
IPADDR=80.88.194.53
NETMASK=255.255.254.0
NETWORK=80.88.194.0
ONBOOT=yes
TYPE=Ethernet
USERCTL=no
PEERDNS=no
GATEWAY=80.88.194.1
IPV6INIT=no
und die zweite Karte ist so konfiguriert
cat /etc/sysconfig/network-scripts/ifcfg-eth1
# Intel Corp.|82547GI Gigabit Ethernet Controller
DEVICE=eth1
BOOTPROTO=none
BROADCAST=80.88.201.255
HWADDR=00:30:48:88:35:1H
IPADDR=80.88.201.248
NETMASK=255.255.255.192
NETWORK=80.88.201.192
ONBOOT=yes
TYPE=Ethernet
USERCTL=no
PEERDNS=no
#GATEWAY=80.88.194.1
IPV6INIT=no
Das Problem ist folgendes, wenn ich eth1 aktivieren geht kein ftp mehr im 201 netz. ich kann mich nicht mehr per ftp verbinden
es endet immer im timeouts. Muss ich evtl. einen virtuellen host in der proftd.conf eintragen?
Die proftpd.conf schaut so aus
at /etc/proftpd.conf
#
# To have more informations about Proftpd configuration
# look at : http://www.proftpd.org/
#
# This is a basic ProFTPD configuration file (rename it to
# 'proftpd.conf' for actual use. It establishes a single server
# and a single anonymous login. It assumes that you have a user/group
# "nobody" and "ftp" for normal operation and anon.
ServerName "ProFTPD"
ServerType inetd
ServerType inetd
DefaultServer on
<Global>
DefaultRoot ~ psacln
AllowOverwrite on
</Global>
DefaultTransferMode binary
UseFtpUsers on
# Port 21 is the standard FTP port.
Port 21
# Umask 022 is a good standard umask to prevent new dirs and files
# from being group and world writable.
Umask 022
# To prevent DoS attacks, set the maximum number of child processes
# to 30. If you need to allow more than 30 concurrent connections
# at once, simply increase this value. Note that this ONLY works
# in standalone mode, in inetd mode you should use an inetd server
# that allows you to limit maximum number of processes per service
# (such as xinetd)
MaxInstances 30
#SocketBindTight on
#Port 0
#<VirtualHost 80.88.194.53>
# Port 21
#</VirtualHost>
#
#<VirtualHost 80.88.201.248>
# Port 21
#</VirtualHost>
#Following part of this config file were generate by PSA automatically
#Any changes in this part will be overwritten by next manipulation
#with Anonymous FTP feature in PSA control panel.
#Include directive should point to place where FTP Virtual Hosts configurations
#preserved
ScoreboardFile /var/run/proftpd/scoreboard
# Primary log file mest be outside of system logrotate province
TransferLog /usr/local/psa/var/log/xferlog
#Change default group for new files and directories in vhosts dir to psacln
<Directory /home/httpd/vhosts>
GroupOwner psacln
</Directory>
# Enable PAM authentication
AuthPAM on
AuthPAMConfig proftpd
IdentLookups off
UseReverseDNS off
AuthGroupFile /etc/group
Include /etc/proftpd.include
PassivePorts 15000 20000
Wäre nett wenn mir jemand dabei helfen könnte das ftp auf beiden interfaces funzt???
MfG
ACID25
ich habe hier einen Server mit 2 NIC´s die wie folgt ausschauen
cat /etc/sysconfig/network-scripts/ifcfg-eth0
# Intel Corp.|82547GI Gigabit Ethernet Controller
DEVICE=eth0
BOOTPROTO=none
BROADCAST=80.88.194.255
HWADDR=00:30:48:88:35:1G
IPADDR=80.88.194.53
NETMASK=255.255.254.0
NETWORK=80.88.194.0
ONBOOT=yes
TYPE=Ethernet
USERCTL=no
PEERDNS=no
GATEWAY=80.88.194.1
IPV6INIT=no
und die zweite Karte ist so konfiguriert
cat /etc/sysconfig/network-scripts/ifcfg-eth1
# Intel Corp.|82547GI Gigabit Ethernet Controller
DEVICE=eth1
BOOTPROTO=none
BROADCAST=80.88.201.255
HWADDR=00:30:48:88:35:1H
IPADDR=80.88.201.248
NETMASK=255.255.255.192
NETWORK=80.88.201.192
ONBOOT=yes
TYPE=Ethernet
USERCTL=no
PEERDNS=no
#GATEWAY=80.88.194.1
IPV6INIT=no
Das Problem ist folgendes, wenn ich eth1 aktivieren geht kein ftp mehr im 201 netz. ich kann mich nicht mehr per ftp verbinden
es endet immer im timeouts. Muss ich evtl. einen virtuellen host in der proftd.conf eintragen?
Die proftpd.conf schaut so aus
at /etc/proftpd.conf
#
# To have more informations about Proftpd configuration
# look at : http://www.proftpd.org/
#
# This is a basic ProFTPD configuration file (rename it to
# 'proftpd.conf' for actual use. It establishes a single server
# and a single anonymous login. It assumes that you have a user/group
# "nobody" and "ftp" for normal operation and anon.
ServerName "ProFTPD"
ServerType inetd
ServerType inetd
DefaultServer on
<Global>
DefaultRoot ~ psacln
AllowOverwrite on
</Global>
DefaultTransferMode binary
UseFtpUsers on
# Port 21 is the standard FTP port.
Port 21
# Umask 022 is a good standard umask to prevent new dirs and files
# from being group and world writable.
Umask 022
# To prevent DoS attacks, set the maximum number of child processes
# to 30. If you need to allow more than 30 concurrent connections
# at once, simply increase this value. Note that this ONLY works
# in standalone mode, in inetd mode you should use an inetd server
# that allows you to limit maximum number of processes per service
# (such as xinetd)
MaxInstances 30
#SocketBindTight on
#Port 0
#<VirtualHost 80.88.194.53>
# Port 21
#</VirtualHost>
#
#<VirtualHost 80.88.201.248>
# Port 21
#</VirtualHost>
#Following part of this config file were generate by PSA automatically
#Any changes in this part will be overwritten by next manipulation
#with Anonymous FTP feature in PSA control panel.
#Include directive should point to place where FTP Virtual Hosts configurations
#preserved
ScoreboardFile /var/run/proftpd/scoreboard
# Primary log file mest be outside of system logrotate province
TransferLog /usr/local/psa/var/log/xferlog
#Change default group for new files and directories in vhosts dir to psacln
<Directory /home/httpd/vhosts>
GroupOwner psacln
</Directory>
# Enable PAM authentication
AuthPAM on
AuthPAMConfig proftpd
IdentLookups off
UseReverseDNS off
AuthGroupFile /etc/group
Include /etc/proftpd.include
PassivePorts 15000 20000
Wäre nett wenn mir jemand dabei helfen könnte das ftp auf beiden interfaces funzt???
MfG
ACID25