OpenSuse10.2 + HP nx7400 = kein WLan

[Chris_TDCi]

Hallo,
habe schon Tage gegoogelt und nur Fehlerbeschreibungen gefunden bei denen Yast das WLan erkannt hat - ist bei mir aber nicht.
LAN funktioniert - nur WLan nicht.
Ist diese Notebook hier: http://www.amazon.de/Hewlett-Packard-RH621ES-Notebook-1-66GHz/dp/tech-data/B000JF8P1W/ref=de_a_smtd/303-9812663-0047420

In Yast ist nix von ieee802 zu finden. Wenn ich das brauch, wo krieg ich das her?

Ist ein Intel Solo Prozessor, und habe OpenSuse 10.2 ix86 DVD installiert.
Dabei den gesamten 'Laptop'-Baum ausgewählt.

Danke schonmal im Voraus, Chris.....

P.S. Die Hardware-Taste fürs W-Lan lässt sich nicht aktivieren (LED bleibt aus). Im Bios ist WLan eingeschaltet

Es folgen einige Konsolenausgaben:

[Chris_TDCi]

lspci (ich seh nix von 3945 Intel Pro)
00:00.0 Host bridge: Intel Corporation Mobile 945GM/PM/GMS/940GML and 945GT Express Memory Controller Hub (rev 03)
00:02.0 VGA compatible controller: Intel Corporation Mobile 945GM/GMS/940GML Express Integrated Graphics Controller (rev 03)
00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/940GML Express Integrated Graphics Controller (rev 03)
00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 01)
00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 (rev 01)
00:1c.1 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 2 (rev 01)
00:1c.3 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 4 (rev 01)
00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #1 (rev 01)
00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #2 (rev 01)
00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #3 (rev 01)
00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #4 (rev 01)
00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 01)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e1)
00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge (rev 01)
00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE Controller (rev 01)
00:1f.2 SATA controller: Intel Corporation 82801GBM/GHM (ICH7 Family) Serial ATA Storage Controller AHCI (rev 01)
02:06.0 CardBus bridge: Texas Instruments PCIxx12 Cardbus Controller
02:06.1 FireWire (IEEE 1394): Texas Instruments PCIxx12 OHCI Compliant IEEE 1394 Host Controller
02:0e.0 Ethernet controller: Broadcom Corporation BCM4401-B0 100Base-TX (rev 02)
10:00.0 Network controller: Broadcom Corporation Dell Wireless 1390 WLAN Mini-PCI Card (rev 01)

[Chris_TDCi]

lsmod
Module Size Used by
ohci1394 37040 0
ieee1394 102584 1 ohci1394
button 10896 0
ipw3945 191520 0
ieee80211 34632 1 ipw3945
ieee80211_crypt 10112 1 ieee80211
lp 15652 0
ndiswrapper 185876 0
parport_pc 42084 1
parport 39752 2 lp,parport_pc
st 40860 0
sr_mod 20132 0
nfs 233324 3
lockd 73064 2 nfs
nfs_acl 7808 1 nfs
sunrpc 156604 4 nfs,lockd,nfs_acl
af_packet 29320 0
joydev 13504 0
xt_tcpudp 7296 16
xt_pkttype 6016 3
ipt_LOG 10624 15
xt_limit 6912 15
i915 23040 2
drm 71316 3 i915
snd_pcm_oss 53376 0
snd_mixer_oss 21248 1 snd_pcm_oss
snd_seq 60272 0
snd_seq_device 12812 1 snd_seq
battery 14340 0
ac 9476 0
ipt_REJECT 9472 3
xt_state 6272 16
iptable_mangle 7040 0
iptable_nat 11524 0
ip_nat 21804 1 iptable_nat
iptable_filter 7168 1
ip6table_mangle 6528 0
ip6table_filter 7040 0
ip_conntrack 52960 3 xt_state,iptable_nat,ip_nat
nfnetlink 11032 2 ip_nat,ip_conntrack
ip_tables 17604 3 iptable_mangle,iptable_nat,iptable_filter
ip6_tables 18756 2 ip6table_mangle,ip6table_filter
x_tables 18180 9 xt_tcpudp,xt_pkttype,ipt_LOG,xt_limit,ipt_REJECT,x t_state,iptable_nat,ip_tables,ip6_tables
apparmor 55572 0
aamatch_pcre 18304 1 apparmor
nls_iso8859_1 8320 1
nls_cp437 9984 1
vfat 16640 1
fat 55324 1 vfat
nls_utf8 6272 1
ntfs 210580 1
loop 20488 0
dm_mod 60184 0
pcmcia 40892 0
firmware_class 14080 2 ipw3945,pcmcia
ide_cd 42272 0
cdrom 38432 2 sr_mod,ide_cd
b44 30604 0
mii 9600 1 b44
yenta_socket 30348 1
rsrc_nonstatic 17024 1 yenta_socket
pcmcia_core 43412 3 pcmcia,yenta_socket,rsrc_nonstatic
snd_hda_intel 23060 5
snd_hda_codec 164352 1 snd_hda_intel
snd_pcm 86916 4 snd_pcm_oss,snd_hda_intel,snd_hda_codec
snd_timer 27908 3 snd_seq,snd_pcm
snd 61188 16 snd_pcm_oss,snd_mixer_oss,snd_seq,snd_seq_device,s nd_hda_intel,snd_hda_codec,snd_pcm,snd_timer
soundcore 13792 1 snd
snd_page_alloc 14472 2 snd_hda_intel,snd_pcm
intel_agp 27804 1
ehci_hcd 34696 0
agpgart 35528 3 drm,intel_agp
uhci_hcd 26892 0
usbcore 114896 3 ndiswrapper,ehci_hcd,uhci_hcd
orinoco_pci 11136 0
orinoco 44180 1 orinoco_pci
hermes 11520 2 orinoco_pci,orinoco
ext3 141192 2
mbcache 12804 1 ext3
jbd 70324 1 ext3
edd 13892 0
fan 8964 0
sg 38044 0
ahci 25860 5
libata 119188 1 ahci
piix 13700 0 [permanent]
thermal 18568 0
processor 34664 1 thermal
sd_mod 24576 6
scsi_mod 136712 6 st,sr_mod,sg,ahci,libata,sd_mod
ide_disk 20480 0
ide_core 129992 3 ide_cd,piix,ide_disk

[Chris_TDCi]

dmesg
Linux version 2.6.18.2-34-default (geeko@buildhost) (gcc version 4.1.2 20061115 (prerelease) (SUSE Linux)) #1 SMP Mon Nov 27 11:46:27 UTC 2006
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000001f7d0000 (usable)
BIOS-e820: 000000001f7d0000 - 000000001f7e5600 (reserved)
BIOS-e820: 000000001f7e5600 - 000000001f7f8000 (ACPI NVS)
BIOS-e820: 000000001f7f8000 - 000000001f800000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fed20000 - 00000000fed9b000 (reserved)
BIOS-e820: 00000000feda0000 - 00000000fedc0000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ffb00000 - 00000000ffc00000 (reserved)
BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
503MB LOWMEM available.
On node 0 totalpages: 128976
DMA zone: 4096 pages, LIFO batch:0
Normal zone: 124880 pages, LIFO batch:31
DMI 2.4 present.
Using APIC driver default
IO/L-APIC allowed because system is MP or new enough
ACPI: RSDP (v002 HP ) @ 0x000f7e50
ACPI: XSDT (v001 HP 30A2 0x28070620 HP 0x00000001) @ 0x1f7e57bc
ACPI: FADT (v004 HP 30A2 0x00000003 HP 0x00000001) @ 0x1f7e5684
ACPI: MADT (v001 HP 30A2 0x00000001 HP 0x00000001) @ 0x1f7e5820
ACPI: MCFG (v001 HP 30A2 0x00000001 HP 0x00000001) @ 0x1f7e5888
ACPI: TCPA (v002 HP 30A2 0x00000001 HP 0x00000001) @ 0x1f7e58c4
ACPI: SSDT (v001 HP HPQSAT 0x00000001 MSFT 0x0100000e) @ 0x1f7f4b56
ACPI: DSDT (v001 HP nx7400 0x00010000 MSFT 0x0100000e) @ 0x00000000
ACPI: PM-Timer IO Port: 0x1008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Processor #0 6:14 APIC version 20
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] disabled)
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode: Flat. Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 20000000 (gap: 1f800000:df400000)
Detected 1662.564 MHz processor.
Built 1 zonelists. Total pages: 128976
Kernel command line: root=/dev/sda2 vga=0x317 resume=/dev/sda6 splash=silent
bootsplash: silent mode.
mapped APIC to ffffd000 (fee00000)
mapped IOAPIC to ffffc000 (fec00000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 2048 (order: 11, 8192 bytes)
Console: colour dummy device 80x25
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Memory: 504360k/515904k available (1697k kernel code, 10984k reserved, 968k data, 196k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 3328.89 BogoMIPS (lpj=6657790)
Security Framework v1.0.0 initialized
Mount-cache hash table entries: 512
CPU: After generic identify, caps: afe9fbff 00100000 00000000 00000000 0000c1a9 00000000 00000000
CPU: After vendor identify, caps: afe9fbff 00100000 00000000 00000000 0000c1a9 00000000 00000000
monitor/mwait feature present.
using mwait in idle threads.
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 2048K
CPU: After all inits, caps: afe9fbff 00100000 00000000 00000940 0000c1a9 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Compat vDSO mapped to ffffe000.
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
Freeing SMP alternatives: 16k freed
checking if image is initramfs... it is
Freeing initrd memory: 3223k freed
ACPI: Core revision 20060707
CPU0: Intel Genuine Intel(R) CPU T1300 @ 1.66GHz stepping 08
Total of 1 processors activated (3328.89 BogoMIPS).
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
Brought up 1 CPUs
migration_cost=0
HP Compaq Laptop series board detected. Selecting BIOS-method for reboots.
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: BIOS Bug: MCFG area at f8000000 is not E820-reserved
PCI: Not using MMCONFIG.
PCI: PCI BIOS revision 2.10 entry at 0xf0322, last bus=32
PCI: Using configuration type 1
Setting up standard PCI resources
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [C002] (0000:00)
PCI: Probing PCI hardware (bus 00)
ACPI: Assume root bridge [\_SB_.C002] bus is 0
Boot video device is 0000:00:02.0
PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
PCI: Transparent bridge - 0000:00:1e.0
PCI: Bus #03 (-#06) is hidden behind transparent bridge #02 (-#03) (try 'pci=assign-busses')
Please report the result to linux-kernel to fix this permanently
ACPI: PCI Interrupt Routing Table [\_SB_.C002._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.C002.C093._PRT]
ACPI: Embedded Controller [C005] (gpe 22) interrupt mode.
ACPI: Power Resource [C1F8] (on)
ACPI: Power Resource [C211] (on)
ACPI: PCI Interrupt Routing Table [\_SB_.C002.C0FC._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.C002.C10C._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.C002.C112._PRT]
ACPI: Power Resource [C21A] (off)
ACPI: PCI Interrupt Link [C108] (IRQs *10 11)
ACPI: PCI Interrupt Link [C109] (IRQs *10 11)
ACPI: PCI Interrupt Link [C10A] (IRQs 10 *11)
ACPI: PCI Interrupt Link [C10B] (IRQs *10 11)
ACPI: PCI Interrupt Link [C124] (IRQs *10 11)
ACPI: PCI Interrupt Link [C125] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [C126] (IRQs 10 11) *0, disabled.
ACPI Exception (pci_link-0180): AE_NOT_FOUND, Evaluating _PRS [20060707]
ACPI: Power Resource [C30E] (off)
ACPI: Power Resource [C30F] (off)
ACPI: Power Resource [C310] (off)
ACPI: Power Resource [C311] (off)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 12 devices
PnPBIOS: Disabled by ACPI PNP
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
pnp: 00:0a: ioport range 0x4d0-0x4d1 has been reserved
pnp: 00:0a: ioport range 0x1000-0x107f could not be reserved
pnp: 00:0a: ioport range 0x1100-0x113f has been reserved
pnp: 00:0a: ioport range 0x1200-0x121f has been reserved
PCI: Ignore bogus resource 6 [0:0] of 0000:00:02.0
PCI: Bridge: 0000:00:1c.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:00:1c.1
IO window: disabled.
MEM window: f4000000-f40fffff
PREFETCH window: disabled.
PCI: Bridge: 0000:00:1c.3
IO window: 2000-3fff
MEM window: f0000000-f3ffffff
PREFETCH window: disabled.
PCI: Bus 3, cardbus bridge: 0000:02:06.0
IO window: 00005000-000050ff
IO window: 00005400-000054ff
PREFETCH window: 20000000-21ffffff
MEM window: 22000000-23ffffff
PCI: Bridge: 0000:00:1e.0
IO window: 5000-5fff
MEM window: f4100000-f43fffff
PREFETCH window: 20000000-21ffffff
ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 169
PCI: Setting latency timer of device 0000:00:1c.0 to 64
ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 17 (level, low) -> IRQ 177
PCI: Setting latency timer of device 0000:00:1c.1 to 64
ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 185
PCI: Setting latency timer of device 0000:00:1c.3 to 64
PCI: Setting latency timer of device 0000:00:1e.0 to 64
ACPI: PCI Interrupt 0000:02:06.0[A] -> GSI 18 (level, low) -> IRQ 193
NET: Registered protocol family 2
IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
TCP established hash table entries: 16384 (order: 5, 131072 bytes)
TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
TCP: Hash tables configured (established 16384 bind 8192)
TCP reno registered
Machine check exception polling timer started.
apm: BIOS not found.
audit: initializing netlink socket (disabled)
audit(1166438097.804:1): initialized
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Initializing Cryptographic API
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
PCI: Setting latency timer of device 0000:00:1c.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.0:pcie00]
Allocate Port Service[0000:00:1c.0:pcie02]
PCI: Setting latency timer of device 0000:00:1c.1 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.1:pcie00]
Allocate Port Service[0000:00:1c.1:pcie02]
PCI: Setting latency timer of device 0000:00:1c.3 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.3:pcie00]
Allocate Port Service[0000:00:1c.3:pcie02]
vesafb: framebuffer at 0xe0000000, mapped to 0xe0080000, using 6144k, total 7872k
vesafb: mode is 1024x768x16, linelength=2048, pages=4
vesafb: protected mode interface info at 00ff:44f0
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
bootsplash 3.1.6-2004/03/31: looking for picture...<6> silentjpeg size 81749 bytes,<6>...found (1024x768, 46202 bytes, v3).
Console: switching to colour frame buffer device 124x44
fb0: VESA VGA frame buffer device
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Real Time Clock Driver v1.12ac
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
Floppy drive(s): fd0 is 1.44M
floppy0: no floppy controllers found
RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize
PNP: PS/2 Controller [PNP0303:C20E,PNP0f13:C20F] at 0x60,0x64 irq 1,12
i8042.c: Detected active multiplexing controller, rev 1.1.
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
mice: PS/2 mouse device common for all mice
input: PC Speaker as /class/input/input0
md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: bitmap version 4.39
NET: Registered protocol family 1
Using IPI No-Shortcut mode
ACPI: (supports S0 S3 S4 S5)
Time: tsc clocksource has been installed.
Freeing unused kernel memory: 196k freed
input: AT Translated Set 2 keyboard as /class/input/input1
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
synaptics reset failed
synaptics reset failed
synaptics reset failed
SCSI subsystem initialized
ACPI: Processor [CPU0] (supports 8 throttling states)
ACPI Exception (acpi_processor-0681): AE_NOT_FOUND, Processor Device is not present [20060707]
ACPI: Getting cpuindex for acpiid 0x2
Synaptics Touchpad, model: 1, fw: 6.2, id: 0x2580b1, caps: 0xa04793/0x300000
serio: Synaptics pass-through port at isa0060/serio4/input0
input: SynPS/2 Synaptics TouchPad as /class/input/input2
ACPI: Thermal Zone [TZ0] (26 C)
ACPI: Thermal Zone [TZ1] (31 C)
ACPI: Thermal Zone [TZ2] (23 C)
ACPI: Thermal Zone [TZ3] (16 C)
ACPI: Thermal Zone [TZ4] (55 C)
ICH7: IDE controller at PCI slot 0000:00:1f.1
ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 16 (level, low) -> IRQ 169
ICH7: chipset revision 1
ICH7: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0x40a0-0x40a7, BIOS settings: hda:DMA, hdb:pio
Probing IDE interface ide0...
hda: PIONEER DVDRW DVR-K17, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
libata version 2.00 loaded.
ahci 0000:00:1f.2: version 2.0
ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 17 (level, low) -> IRQ 177
PCI: Setting latency timer of device 0000:00:1f.2 to 64
ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 1.5 Gbps 0x1 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq ilck stag pm led clo pmp pio slum part
ata1: SATA max UDMA/133 cmd 0xE0074100 ctl 0x0 bmdma 0x0 irq 233
ata2: SATA max UDMA/133 cmd 0xE0074180 ctl 0x0 bmdma 0x0 irq 233
ata3: SATA max UDMA/133 cmd 0xE0074200 ctl 0x0 bmdma 0x0 irq 233
ata4: SATA max UDMA/133 cmd 0xE0074280 ctl 0x0 bmdma 0x0 irq 233
scsi0 : ahci
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: ATA-7, max UDMA/100, 234441648 sectors: LBA48
ata1.00: ata1: dev 0 multi count 16
ata1.00: configured for UDMA/100
scsi1 : ahci
ata2: SATA link down (SStatus 0 SControl 0)
scsi2 : ahci
ata3: SATA link down (SStatus 0 SControl 0)
scsi3 : ahci
ata4: SATA link down (SStatus 0 SControl 0)
Vendor: ATA Model: FUJITSU MHV2120B Rev: 892C
Type: Direct-Access ANSI SCSI revision: 05
SCSI device sda: 234441648 512-byte hdwr sectors (120034 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: drive cache: write back
SCSI device sda: 234441648 512-byte hdwr sectors (120034 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: drive cache: write back
sda: sda1 sda2 sda3 < sda5 sda6 sda7 >
sd 0:0:0:0: Attached scsi disk sda
sd 0:0:0:0: Attached scsi generic sg0 type 0
ACPI: Transitioning device [C312] to D3
ACPI: Transitioning device [C312] to D3
ACPI: Fan [C312] (off)
ACPI: Transitioning device [C313] to D3
ACPI: Transitioning device [C313] to D3
ACPI: Fan [C313] (off)
ACPI: Transitioning device [C314] to D3
ACPI: Transitioning device [C314] to D3
ACPI: Fan [C314] (off)
ACPI: Transitioning device [C315] to D3
ACPI: Transitioning device [C315] to D3
ACPI: Fan [C315] (off)
BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
Attempting manual resume
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda2, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
orinoco 0.15 (David Gibson <hermes@gibson.dropbear.id.au>, Pavel Roskin <proski@gnu.org>, et al)
orinoco_pci 0.15 (Pavel Roskin <proski@gnu.org>, David Gibson <hermes@gibson.dropbear.id.au> & Jean Tourrilhes <jt@hpl.hp.com>)
parport: PnPBIOS parport detected.
parport0: PC-style at 0x378 (0x778), irq 7, dma 1 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
lp0: using parport0 (interrupt-driven).
usbcore: registered new driver usbfs
usbcore: registered new driver hub
USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 20 (level, low) -> IRQ 50
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:1d.0: irq 50, io base 0x00004020
usb usb1: new device found, idVendor=0000, idProduct=0000
usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: UHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.18.2-34-default uhci_hcd
usb usb1: SerialNumber: 0000:00:1d.0
Linux agpgart interface v0.101 (c) Dave Jones
intel_rng: FWH not detected
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 177
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.1: irq 177, io base 0x00004040
usb usb2: new device found, idVendor=0000, idProduct=0000
usb usb2: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: UHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.18.2-34-default uhci_hcd
usb usb2: SerialNumber: 0000:00:1d.1
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 193
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.2: irq 193, io base 0x00004060
usb usb3: new device found, idVendor=0000, idProduct=0000
usb usb3: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.18.2-34-default uhci_hcd
usb usb3: SerialNumber: 0000:00:1d.2
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 19 (level, low) -> IRQ 185
PCI: Setting latency timer of device 0000:00:1d.3 to 64
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.3: irq 185, io base 0x00004080
usb usb4: new device found, idVendor=0000, idProduct=0000
usb usb4: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.18.2-34-default uhci_hcd
usb usb4: SerialNumber: 0000:00:1d.3
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 20 (level, low) -> IRQ 50
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
ehci_hcd 0000:00:1d.7: debug port 1
PCI: cache line size of 32 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: irq 50, io mem 0xf4584000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb5: new device found, idVendor=0000, idProduct=0000
usb usb5: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: EHCI Host Controller
usb usb5: Manufacturer: Linux 2.6.18.2-34-default ehci_hcd
usb usb5: SerialNumber: 0000:00:1d.7
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 8 ports detected
ieee1394: Initialized config rom entry `ip1394'
agpgart: Detected an Intel 945GM Chipset.
agpgart: Detected 7932K stolen memory.
agpgart: AGP aperture is 256M @ 0xe0000000
hda: ATAPI 24X DVD-ROM DVD-R-RAM CD-R/RW drive, 2000kB Cache, DMA
Uniform CD-ROM driver Revision: 3.20
ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 169
PCI: Setting latency timer of device 0000:00:1b.0 to 64
Yenta: CardBus bridge found at 0000:02:06.0 [103c:30a2]
Yenta: Enabling burst memory read transactions
Yenta: Using INTVAL to route CSC interrupts to PCI
Yenta: Routing CardBus interrupts to PCI
Yenta TI: socket 0000:02:06.0, mfunc 0x01011b22, devctl 0x64
Yenta: ISA IRQ mask 0x0c78, PCI irq 193
Socket status: 30000006
Yenta: Raising subordinate bus# of parent bus (#02) from #03 to #06
pcmcia: parent PCI bridge I/O window: 0x5000 - 0x5fff
cs: IO port probe 0x5000-0x5fff: clean.
pcmcia: parent PCI bridge Memory window: 0xf4100000 - 0xf43fffff
pcmcia: parent PCI bridge Memory window: 0x20000000 - 0x21ffffff
b44.c:v1.01 (Jun 16, 2006)
ACPI: PCI Interrupt 0000:02:0e.0[A] -> GSI 16 (level, low) -> IRQ 169
eth0: Broadcom 4400 10/100BaseT Ethernet 00:17:08:40:f1:35
ACPI: PCI Interrupt 0000:02:06.1[B] -> GSI 19 (level, low) -> IRQ 185
ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[185] MMIO=[f4101000-f41017ff] Max Packet=[2048] IR/IT contexts=[4/8]
cs: IO port probe 0x100-0x3af: clean.
cs: IO port probe 0x3e0-0x4ff: clean.
cs: IO port probe 0x820-0x8ff: clean.
cs: IO port probe 0xc00-0xcf7: clean.
cs: IO port probe 0xa00-0xaff: clean.
Adding 1052216k swap on /dev/sda6. Priority:-1 extents:1 across:1052216k
device-mapper: ioctl: 4.7.0-ioctl (2006-06-24) initialised: dm-devel@redhat.com
loop: loaded (max 8 devices)
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda5, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
NTFS driver 2.1.27 [Flags: R/W MODULE].
NTFS volume version 3.1.
NTFS-fs error (device sda1): load_system_files(): Volume is dirty. Mounting read-only. Run chkdsk and mount in Windows.
AppArmor: AppArmor initialized
audit(1166438117.849:2): AppArmor initialized

ip6_tables: (C) 2000-2006 Netfilter Core Team
ip_tables: (C) 2000-2006 Netfilter Core Team
Netfilter messages via NETLINK v0.30.
ip_conntrack version 2.4 (4030 buckets, 32240 max) - 228 bytes per conntrack
ACPI: AC Adapter [C1B4] (off-line)
ACPI: Battery Slot [C1B6] (battery present)
ACPI: Battery Slot [C1B5] (battery absent)
ACPI: Power Button (FF) [PWRF]
ACPI: Sleep Button (CM) [C238]
ACPI: Lid Switch [C231]
powernow: This module only works with AMD K7 CPUs
audit(1166434534.596:3): audit_pid=3040 old=0 by auid=4294967295
IA-32 Microcode Update Driver: v1.14a <tigran@veritas.com>
[drm] Initialized drm 1.0.1 20051102
ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 169
[drm] Initialized i915 1.5.0 20060119 on minor 0
bootsplash: status on console 0 changed to on
b44: eth0: Link is up at 100 Mbps, full duplex.
b44: eth0: Flow control is off for TX and off for RX.
NET: Registered protocol family 17
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:15:0c:05:db:31:08:00 SRC=192.168.178.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0xC0 TTL=1 ID=40737 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:15:0c:05:db:31:08:00 SRC=192.168.178.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0xC0 TTL=1 ID=40993 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:15:0c:05:db:31:08:00 SRC=192.168.178.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0xC0 TTL=1 ID=41249 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:15:0c:05:db:31:08:00 SRC=192.168.178.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0xC0 TTL=1 ID=41505 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:15:0c:05:db:31:08:00 SRC=192.168.178.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0xC0 TTL=1 ID=41761 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:15:0c:05:db:31:08:00 SRC=192.168.178.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0xC0 TTL=1 ID=42017 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:15:0c:05:db:31:08:00 SRC=192.168.178.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0xC0 TTL=1 ID=42273 DF OPT (94040000) PROTO=2
Freezing cpus ...
Stopping tasks: ================================================== ================================================== ===================================|
Shrinking memory... -\|/-\|/done (64210 pages freed)
pnp: Device 00:02 disabled.
ACPI: PCI interrupt for device 0000:02:06.0 disabled
ACPI: PCI interrupt for device 0000:00:1d.7 disabled
ACPI: PCI interrupt for device 0000:00:1d.3 disabled
ACPI: PCI interrupt for device 0000:00:1d.2 disabled
ACPI: PCI interrupt for device 0000:00:1d.1 disabled
ACPI: PCI interrupt for device 0000:00:1d.0 disabled
ACPI: PCI interrupt for device 0000:00:1b.0 disabled

swsusp: Need to copy 55284 pages
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
swsusp: Restoring Highmem
PM: Writing back config space on device 0000:00:1b.0 at offset 1 (was 100006, writing 100000)
PCI: Enabling device 0000:00:1b.0 (0000 -> 0002)
ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 169
PCI: Setting latency timer of device 0000:00:1b.0 to 64
PCI: Setting latency timer of device 0000:00:1c.0 to 64
PCI: Setting latency timer of device 0000:00:1c.1 to 64
PCI: Setting latency timer of device 0000:00:1c.3 to 64
ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 20 (level, low) -> IRQ 50
PCI: Setting latency timer of device 0000:00:1d.0 to 64
usb usb1: root hub lost power or was reset
ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 177
PCI: Setting latency timer of device 0000:00:1d.1 to 64
usb usb2: root hub lost power or was reset
ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 193
PCI: Setting latency timer of device 0000:00:1d.2 to 64
usb usb3: root hub lost power or was reset
ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 19 (level, low) -> IRQ 185
PCI: Setting latency timer of device 0000:00:1d.3 to 64
usb usb4: root hub lost power or was reset
ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 20 (level, low) -> IRQ 50
PCI: Setting latency timer of device 0000:00:1d.7 to 64
usb usb5: root hub lost power or was reset
ehci_hcd 0000:00:1d.7: debug port 1
PCI: cache line size of 32 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
PM: Writing back config space on device 0000:00:1e.0 at offset 6 (was 20030200, writing 20060200)
PCI: Setting latency timer of device 0000:00:1e.0 to 64
PCI: Setting latency timer of device 0000:00:1f.2 to 64
PM: Writing back config space on device 0000:02:06.0 at offset f (was 3c4010b, writing 5c0010b)
PM: Writing back config space on device 0000:02:06.0 at offset 3 (was 824010, writing 82a820)
ACPI: PCI Interrupt 0000:02:06.0[A] -> GSI 18 (level, low) -> IRQ 193
pnp: Device 00:02 activated.
pnp: Device 00:07 does not support activation.
pnp: Device 00:08 does not support activation.
synaptics reset failed
synaptics reset failed
synaptics reset failed
ata2: SATA link down (SStatus 0 SControl 0)
ata3: SATA link down (SStatus 0 SControl 0)
ata4: SATA link down (SStatus 0 SControl 0)
Restarting tasks... done
Thawing cpus ...
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: configured for UDMA/100
SCSI device sda: 234441648 512-byte hdwr sectors (120034 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: drive cache: write back
ACPI: Power Button (FF) [PWRF]
ACPI: Sleep Button (CM) [C238]
ACPI: Lid Switch [C231]
ieee1394: Initialized config rom entry `ip1394'
ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[185] MMIO=[f4101000-f41017ff] Max Packet=[2048] IR/IT contexts=[4/8]
b44: eth0: Link is up at 100 Mbps, full duplex.
b44: eth0: Flow control is off for TX and off for RX.
SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.178.24 DST=66.249.93.99 LEN=40 TOS=0x00 PREC=0x00 TTL=64 ID=45295 DF PROTO=TCP SPT=1652 DPT=80 WINDOW=7504 RES=0x00 ACK FIN URGP=0
SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT= MAC=00:17:08:40:f1:35:00:15:0c:05:db:31:08:00 SRC=66.249.93.99 DST=192.168.178.24 LEN=40 TOS=0x00 PREC=0x00 TTL=243 ID=26288 PROTO=TCP SPT=80 DPT=1652 WINDOW=8201 RES=0x00 RST URGP=0
SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.178.24 DST=63.245.209.21 LEN=40 TOS=0x00 PREC=0x00 TTL=64 ID=2708 DF PROTO=TCP SPT=19380 DPT=80 WINDOW=6432 RES=0x00 ACK FIN URGP=0
SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT= MAC=00:17:08:40:f1:35:00:15:0c:05:db:31:08:00 SRC=63.245.209.21 DST=192.168.178.24 LEN=40 TOS=0x00 PREC=0x00 TTL=244 ID=35295 PROTO=TCP SPT=80 DPT=19380 WINDOW=8201 RES=0x00 RST URGP=0
SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.178.24 DST=209.85.135.147 LEN=40 TOS=0x00 PREC=0x00 TTL=64 ID=29842 DF PROTO=TCP SPT=24350 DPT=80 WINDOW=34320 RES=0x00 ACK FIN URGP=0
SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.178.24 DST=63.245.209.21 LEN=40 TOS=0x00 PREC=0x00 TTL=64 ID=52797 DF PROTO=TCP SPT=19379 DPT=80 WINDOW=6700 RES=0x00 ACK FIN URGP=0
SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT= MAC=00:17:08:40:f1:35:00:15:0c:05:db:31:08:00 SRC=209.85.135.147 DST=192.168.178.24 LEN=40 TOS=0x00 PREC=0x00 TTL=239 ID=13470 PROTO=TCP SPT=80 DPT=24350 WINDOW=8201 RES=0x00 RST URGP=0
SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT= MAC=00:17:08:40:f1:35:00:15:0c:05:db:31:08:00 SRC=63.245.209.21 DST=192.168.178.24 LEN=40 TOS=0x00 PREC=0x00 TTL=244 ID=53297 PROTO=TCP SPT=80 DPT=19379 WINDOW=8201 RES=0x00 RST URGP=0
SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.178.24 DST=209.85.135.104 LEN=40 TOS=0x00 PREC=0x00 TTL=64 ID=14793 DF PROTO=TCP SPT=14671 DPT=80 WINDOW=6534 RES=0x00 ACK FIN URGP=0
SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT= MAC=00:17:08:40:f1:35:00:15:0c:05:db:31:08:00 SRC=209.85.135.104 DST=192.168.178.24 LEN=40 TOS=0x00 PREC=0x00 TTL=239 ID=60571 PROTO=TCP SPT=80 DPT=14671 WINDOW=8201 RES=0x00 RST URGP=0
SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.178.24 DST=66.249.93.99 LEN=40 TOS=0x00 PREC=0x00 TTL=64 ID=45296 DF PROTO=TCP SPT=1652 DPT=80 WINDOW=7504 RES=0x00 ACK FIN URGP=0
SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT= MAC=00:17:08:40:f1:35:00:15:0c:05:db:31:08:00 SRC=66.249.93.99 DST=192.168.178.24 LEN=40 TOS=0x00 PREC=0x00 TTL=243 ID=64372 PROTO=TCP SPT=80 DPT=1652 WINDOW=8201 RES=0x00 RST URGP=0
SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.178.24 DST=63.245.209.21 LEN=40 TOS=0x00 PREC=0x00 TTL=64 ID=2709 DF PROTO=TCP SPT=19380 DPT=80 WINDOW=6432 RES=0x00 ACK FIN URGP=0
SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT= MAC=00:17:08:40:f1:35:00:15:0c:05:db:31:08:00 SRC=63.245.209.21 DST=192.168.178.24 LEN=40 TOS=0x00 PREC=0x00 TTL=243 ID=56366 PROTO=TCP SPT=80 DPT=19380 WINDOW=8201 RES=0x00 RST URGP=0
SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.178.24 DST=209.85.135.147 LEN=40 TOS=0x00 PREC=0x00 TTL=64 ID=29843 DF PROTO=TCP SPT=24350 DPT=80 WINDOW=34320 RES=0x00 ACK FIN URGP=0
SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT= MAC=00:17:08:40:f1:35:00:15:0c:05:db:31:08:00 SRC=209.85.135.147 DST=192.168.178.24 LEN=40 TOS=0x00 PREC=0x00 TTL=240 ID=24407 PROTO=TCP SPT=80 DPT=24350 WINDOW=8201 RES=0x00 RST URGP=0
SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.178.24 DST=209.85.135.104 LEN=40 TOS=0x00 PREC=0x00 TTL=64 ID=14794 DF PROTO=TCP SPT=14671 DPT=80 WINDOW=6534 RES=0x00 ACK FIN URGP=0
SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT= MAC=00:17:08:40:f1:35:00:15:0c:05:db:31:08:00 SRC=209.85.135.104 DST=192.168.178.24 LEN=40 TOS=0x00 PREC=0x00 TTL=240 ID=41451 PROTO=TCP SPT=80 DPT=14671 WINDOW=8201 RES=0x00 RST URGP=0
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:15:0c:05:db:31:08:00 SRC=192.168.178.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0xC0 TTL=1 ID=46625 DF OPT (94040000) PROTO=2
SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.178.24 DST=63.245.209.21 LEN=40 TOS=0x00 PREC=0x00 TTL=64 ID=2710 DF PROTO=TCP SPT=19380 DPT=80 WINDOW=6432 RES=0x00 ACK FIN URGP=0
SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT= MAC=00:17:08:40:f1:35:00:15:0c:05:db:31:08:00 SRC=63.245.209.21 DST=192.168.178.24 LEN=40 TOS=0x00 PREC=0x00 TTL=243 ID=5454 PROTO=TCP SPT=80 DPT=19380 WINDOW=8201 RES=0x00 RST URGP=0
SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.178.24 DST=209.85.135.147 LEN=40 TOS=0x00 PREC=0x00 TTL=64 ID=29844 DF PROTO=TCP SPT=24350 DPT=80 WINDOW=34320 RES=0x00 ACK FIN URGP=0
SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.178.24 DST=63.245.209.21 LEN=40 TOS=0x00 PREC=0x00 TTL=64 ID=52799 DF PROTO=TCP SPT=19379 DPT=80 WINDOW=6700 RES=0x00 ACK FIN URGP=0
SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT= MAC=00:17:08:40:f1:35:00:15:0c:05:db:31:08:00 SRC=209.85.135.147 DST=192.168.178.24 LEN=40 TOS=0x00 PREC=0x00 TTL=239 ID=44225 PROTO=TCP SPT=80 DPT=24350 WINDOW=8201 RES=0x00 RST URGP=0
SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT= MAC=00:17:08:40:f1:35:00:15:0c:05:db:31:08:00 SRC=63.245.209.21 DST=192.168.178.24 LEN=40 TOS=0x00 PREC=0x00 TTL=243 ID=28445 PROTO=TCP SPT=80 DPT=19379 WINDOW=8201 RES=0x00 RST URGP=0
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:15:0c:05:db:31:08:00 SRC=192.168.178.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0xC0 TTL=1 ID=46881 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:15:0c:05:db:31:08:00 SRC=192.168.178.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0xC0 TTL=1 ID=47137 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:15:0c:05:db:31:08:00 SRC=192.168.178.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0xC0 TTL=1 ID=47393 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:15:0c:05:db:31:08:00 SRC=192.168.178.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0xC0 TTL=1 ID=47649 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:15:0c:05:db:31:08:00 SRC=192.168.178.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0xC0 TTL=1 ID=47905 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:15:0c:05:db:31:08:00 SRC=192.168.178.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0xC0 TTL=1 ID=48161 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:15:0c:05:db:31:08:00 SRC=192.168.178.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0xC0 TTL=1 ID=48417 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:15:0c:05:db:31:08:00 SRC=192.168.178.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0xC0 TTL=1 ID=48673 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:15:0c:05:db:31:08:00 SRC=192.168.178.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0xC0 TTL=1 ID=48929 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:15:0c:05:db:31:08:00 SRC=192.168.178.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0xC0 TTL=1 ID=49185 DF OPT (94040000) PROTO=2
(Weiter gehts unten...)

[Chris_TDCi]

.......(Teil2)
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:15:0c:05:db:31:08:00 SRC=192.168.178.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0xC0 TTL=1 ID=49441 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:15:0c:05:db:31:08:00 SRC=192.168.178.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0xC0 TTL=1 ID=49697 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:15:0c:05:db:31:08:00 SRC=192.168.178.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0xC0 TTL=1 ID=49953 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:15:0c:05:db:31:08:00 SRC=192.168.178.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0xC0 TTL=1 ID=50209 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:15:0c:05:db:31:08:00 SRC=192.168.178.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0xC0 TTL=1 ID=50465 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:15:0c:05:db:31:08:00 SRC=192.168.178.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0xC0 TTL=1 ID=50721 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:15:0c:05:db:31:08:00 SRC=192.168.178.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0xC0 TTL=1 ID=50977 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:15:0c:05:db:31:08:00 SRC=192.168.178.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0xC0 TTL=1 ID=51233 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:15:0c:05:db:31:08:00 SRC=192.168.178.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0xC0 TTL=1 ID=51489 DF OPT (94040000) PROTO=2
st: Version 20050830, fixed bufsize 32768, s/g segs 256
SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.178.24 DST=212.201.44.24 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=48368 DF PROTO=TCP SPT=26254 DPT=80 WINDOW=11880 RES=0x00 ACK FIN URGP=0 OPT (0101080A001843951F045BD7)
SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.178.24 DST=212.201.44.24 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=61038 DF PROTO=TCP SPT=24338 DPT=80 WINDOW=12240 RES=0x00 ACK FIN URGP=0 OPT (0101080A001843971F04744B)
SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT= MAC=00:17:08:40:f1:35:00:15:0c:05:db:31:08:00 SRC=212.201.44.24 DST=192.168.178.24 LEN=40 TOS=0x00 PREC=0x00 TTL=53 ID=0 DF PROTO=TCP SPT=80 DPT=26254 WINDOW=0 RES=0x00 RST URGP=0
SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT= MAC=00:17:08:40:f1:35:00:15:0c:05:db:31:08:00 SRC=212.201.44.24 DST=192.168.178.24 LEN=40 TOS=0x00 PREC=0x00 TTL=53 ID=0 DF PROTO=TCP SPT=80 DPT=24338 WINDOW=0 RES=0x00 RST URGP=0
SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.178.24 DST=195.135.221.130 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=12180 DF PROTO=TCP SPT=10760 DPT=80 WINDOW=432 RES=0x00 ACK FIN URGP=0 OPT (0101080A001843C204C06F7C)
SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.178.24 DST=80.237.136.138 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=59355 DF PROTO=TCP SPT=28423 DPT=80 WINDOW=499 RES=0x00 ACK FIN URGP=0 OPT (0101080A001843C2F70DB969)
SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.178.24 DST=192.35.244.50 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=7649 DF PROTO=TCP SPT=2045 DPT=80 WINDOW=546 RES=0x00 ACK FIN URGP=0 OPT (0101080A001843C21727F1E9)
SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT= MAC=00:17:08:40:f1:35:00:15:0c:05:db:31:08:00 SRC=80.237.136.138 DST=192.168.178.24 LEN=40 TOS=0x00 PREC=0x00 TTL=55 ID=0 DF PROTO=TCP SPT=80 DPT=28423 WINDOW=0 RES=0x00 RST URGP=0
SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT= MAC=00:17:08:40:f1:35:00:15:0c:05:db:31:08:00 SRC=195.135.221.130 DST=192.168.178.24 LEN=40 TOS=0x00 PREC=0x00 TTL=56 ID=0 DF PROTO=TCP SPT=80 DPT=10760 WINDOW=0 RES=0x00 RST URGP=0
SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT= MAC=00:17:08:40:f1:35:00:15:0c:05:db:31:08:00 SRC=212.201.44.24 DST=192.168.178.24 LEN=40 TOS=0x00 PREC=0x00 TTL=53 ID=0 DF PROTO=TCP SPT=80 DPT=26254 WINDOW=0 RES=0x00 RST URGP=0
SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.178.24 DST=212.201.44.24 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=48374 DF PROTO=TCP SPT=26254 DPT=80 WINDOW=11880 RES=0x00 ACK FIN URGP=0 OPT (0101080A001858BF1F045BD7)
SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT= MAC=00:17:08:40:f1:35:00:15:0c:05:db:31:08:00 SRC=212.201.44.24 DST=192.168.178.24 LEN=40 TOS=0x00 PREC=0x00 TTL=53 ID=0 DF PROTO=TCP SPT=80 DPT=26254 WINDOW=0 RES=0x00 RST URGP=0
ISO 9660 Extensions: Microsoft Joliet Level 3
ISO 9660 Extensions: RRIP_1991A
SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.178.24 DST=212.201.44.24 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=48375 DF PROTO=TCP SPT=26254 DPT=80 WINDOW=11880 RES=0x00 ACK FIN URGP=0 OPT (0101080A00186E401F045BD7)
SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT= MAC=00:17:08:40:f1:35:00:15:0c:05:db:31:08:00 SRC=212.201.44.24 DST=192.168.178.24 LEN=40 TOS=0x00 PREC=0x00 TTL=53 ID=0 DF PROTO=TCP SPT=80 DPT=26254 WINDOW=0 RES=0x00 RST URGP=0
SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.178.24 DST=195.135.221.130 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=12187 DF PROTO=TCP SPT=10760 DPT=80 WINDOW=432 RES=0x00 ACK FIN URGP=0 OPT (0101080A0018873A04C06F7C)
SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT= MAC=00:17:08:40:f1:35:00:15:0c:05:db:31:08:00 SRC=195.135.221.130 DST=192.168.178.24 LEN=40 TOS=0x00 PREC=0x00 TTL=56 ID=0 DF PROTO=TCP SPT=80 DPT=10760 WINDOW=0 RES=0x00 RST URGP=0
ISO 9660 Extensions: Microsoft Joliet Level 3
ISO 9660 Extensions: RRIP_1991A
SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.178.24 DST=212.201.44.24 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=48376 DF PROTO=TCP SPT=26254 DPT=80 WINDOW=11880 RES=0x00 ACK FIN URGP=0 OPT (0101080A001899401F045BD7)
SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT= MAC=00:17:08:40:f1:35:00:15:0c:05:db:31:08:00 SRC=212.201.44.24 DST=192.168.178.24 LEN=40 TOS=0x00 PREC=0x00 TTL=53 ID=0 DF PROTO=TCP SPT=80 DPT=26254 WINDOW=0 RES=0x00 RST URGP=0
SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.178.24 DST=195.135.221.130 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=12188 DF PROTO=TCP SPT=10760 DPT=80 WINDOW=432 RES=0x00 ACK FIN URGP=0 OPT (0101080A0018CB3A04C06F7C)
SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT= MAC=00:17:08:40:f1:35:00:15:0c:05:db:31:08:00 SRC=195.135.221.130 DST=192.168.178.24 LEN=40 TOS=0x00 PREC=0x00 TTL=56 ID=0 DF PROTO=TCP SPT=80 DPT=10760 WINDOW=0 RES=0x00 RST URGP=0
SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.178.24 DST=192.35.244.50 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=7656 DF PROTO=TCP SPT=2045 DPT=80 WINDOW=546 RES=0x00 ACK FIN URGP=0 OPT (0101080A0018D2231727F1E9)
SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT= MAC=00:17:08:40:f1:35:00:15:0c:05:db:31:08:00 SRC=192.35.244.50 DST=192.168.178.24 LEN=40 TOS=0x00 PREC=0x00 TTL=57 ID=46039 DF PROTO=TCP SPT=80 DPT=2045 WINDOW=0 RES=0x00 RST URGP=0
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:15:0c:05:db:31:08:00 SRC=192.168.178.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0xC0 TTL=1 ID=52001 DF OPT (94040000) PROTO=2
b44: eth0: Link is up at 100 Mbps, full duplex.
b44: eth0: Flow control is off for TX and off for RX.
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:15:0c:05:db:31:08:00 SRC=192.168.178.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0xC0 TTL=1 ID=52257 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:15:0c:05:db:31:08:00 SRC=192.168.178.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0xC0 TTL=1 ID=52513 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:15:0c:05:db:31:08:00 SRC=192.168.178.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0xC0 TTL=1 ID=52769 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:15:0c:05:db:31:08:00 SRC=192.168.178.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0xC0 TTL=1 ID=53025 DF OPT (94040000) PROTO=2
b44: eth0: Link is up at 100 Mbps, full duplex.
b44: eth0: Flow control is off for TX and off for RX.
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:15:0c:05:db:31:08:00 SRC=192.168.178.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0xC0 TTL=1 ID=53281 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:15:0c:05:db:31:08:00 SRC=192.168.178.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0xC0 TTL=1 ID=53537 DF OPT (94040000) PROTO=2
pnp: Device 00:02 disabled.
parport 0x378 (WARNING): CTR: wrote 0x0c, read 0xff
parport 0x378 (WARNING): DATA: wrote 0xaa, read 0xff
parport 0x378: You gave this address, but there is probably no parallel port there!
parport0: PC-style at 0x378 [PCSPP,TRISTATE]
pnp: Device 00:02 activated.
parport: PnPBIOS parport detected.
parport0: PC-style at 0x378 (0x778), irq 7, dma 1 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
lp0: using parport0 (interrupt-driven).
pnp: Device 00:02 disabled.
parport 0x378 (WARNING): CTR: wrote 0x0c, read 0xff
parport 0x378 (WARNING): DATA: wrote 0xaa, read 0xff
parport 0x378: You gave this address, but there is probably no parallel port there!
parport0: PC-style at 0x378 [PCSPP,TRISTATE]
ppa: Version 2.07 (for Linux 2.4.x)
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:15:0c:05:db:31:08:00 SRC=192.168.178.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0xC0 TTL=1 ID=53793 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:15:0c:05:db:31:08:00 SRC=192.168.178.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0xC0 TTL=1 ID=54049 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:15:0c:05:db:31:08:00 SRC=192.168.178.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0xC0 TTL=1 ID=54305 DF OPT (94040000) PROTO=2
ndiswrapper version 1.25 loaded (preempt=no,smp=yes)
usbcore: registered new driver ndiswrapper
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:15:0c:05:db:31:08:00 SRC=192.168.178.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0xC0 TTL=1 ID=54561 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:15:0c:05:db:31:08:00 SRC=192.168.178.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0xC0 TTL=1 ID=54817 DF OPT (94040000) PROTO=2
Freezing cpus ...
Stopping tasks: ================================================== ================================================== ====================|
Shrinking memory... -\|/-\|/done (62716 pages freed)
ACPI: PCI interrupt for device 0000:02:06.0 disabled
ACPI: PCI interrupt for device 0000:00:1d.7 disabled
ACPI: PCI interrupt for device 0000:00:1d.3 disabled
ACPI: PCI interrupt for device 0000:00:1d.2 disabled
ACPI: PCI interrupt for device 0000:00:1d.1 disabled
ACPI: PCI interrupt for device 0000:00:1d.0 disabled
ACPI: PCI interrupt for device 0000:00:1b.0 disabled

swsusp: Need to copy 51517 pages
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
swsusp: Restoring Highmem
ACPI: Transitioning device [C315] to D3
ACPI: Transitioning device [C315] to D3
PM: Writing back config space on device 0000:00:1b.0 at offset 1 (was 100006, writing 100000)
PCI: Enabling device 0000:00:1b.0 (0000 -> 0002)
ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 169
PCI: Setting latency timer of device 0000:00:1b.0 to 64
PCI: Setting latency timer of device 0000:00:1c.0 to 64
PCI: Setting latency timer of device 0000:00:1c.1 to 64
PCI: Setting latency timer of device 0000:00:1c.3 to 64
ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 20 (level, low) -> IRQ 50
PCI: Setting latency timer of device 0000:00:1d.0 to 64
usb usb1: root hub lost power or was reset
ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 177
PCI: Setting latency timer of device 0000:00:1d.1 to 64
usb usb2: root hub lost power or was reset
ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 193
PCI: Setting latency timer of device 0000:00:1d.2 to 64
usb usb3: root hub lost power or was reset
ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 19 (level, low) -> IRQ 185
PCI: Setting latency timer of device 0000:00:1d.3 to 64
usb usb4: root hub lost power or was reset
ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 20 (level, low) -> IRQ 50
PCI: Setting latency timer of device 0000:00:1d.7 to 64
usb usb5: root hub lost power or was reset
ehci_hcd 0000:00:1d.7: debug port 1
PCI: cache line size of 32 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
PM: Writing back config space on device 0000:00:1e.0 at offset 6 (was 20030200, writing 20060200)
PCI: Setting latency timer of device 0000:00:1e.0 to 64
PCI: Setting latency timer of device 0000:00:1f.2 to 64
PM: Writing back config space on device 0000:02:06.0 at offset f (was 3c4010b, writing 5c0010b)
PM: Writing back config space on device 0000:02:06.0 at offset 3 (was 824010, writing 82a820)
ACPI: PCI Interrupt 0000:02:06.0[A] -> GSI 18 (level, low) -> IRQ 193
pnp: Device 00:07 does not support activation.
pnp: Device 00:08 does not support activation.
synaptics reset failed
synaptics reset failed
synaptics reset failed
ata2: SATA link down (SStatus 0 SControl 0)
ata3: SATA link down (SStatus 0 SControl 0)
ata4: SATA link down (SStatus 0 SControl 0)
Restarting tasks... done
Thawing cpus ...
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: configured for UDMA/100
SCSI device sda: 234441648 512-byte hdwr sectors (120034 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: drive cache: write back
ACPI: Power Button (FF) [PWRF]
ACPI: Sleep Button (CM) [C238]
ACPI: Lid Switch [C231]
ieee1394: Initialized config rom entry `ip1394'
ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[185] MMIO=[f4101000-f41017ff] Max Packet=[2048] IR/IT contexts=[4/8]
b44: eth0: Link is up at 100 Mbps, full duplex.
b44: eth0: Flow control is off for TX and off for RX.
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:15:0c:05:db:31:08:00 SRC=192.168.178.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0xC0 TTL=1 ID=58145 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:15:0c:05:db:31:08:00 SRC=192.168.178.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0xC0 TTL=1 ID=58401 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:15:0c:05:db:31:08:00 SRC=192.168.178.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0xC0 TTL=1 ID=58657 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:15:0c:05:db:31:08:00 SRC=192.168.178.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0xC0 TTL=1 ID=58913 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:15:0c:05:db:31:08:00 SRC=192.168.178.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0xC0 TTL=1 ID=59169 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:15:0c:05:db:31:08:00 SRC=192.168.178.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0xC0 TTL=1 ID=59425 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:15:0c:05:db:31:08:00 SRC=192.168.178.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0xC0 TTL=1 ID=59681 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:15:0c:05:db:31:08:00 SRC=192.168.178.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0xC0 TTL=1 ID=59937 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:15:0c:05:db:31:08:00 SRC=192.168.178.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0xC0 TTL=1 ID=60193 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:15:0c:05:db:31:08:00 SRC=192.168.178.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0xC0 TTL=1 ID=60449 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:15:0c:05:db:31:08:00 SRC=192.168.178.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0xC0 TTL=1 ID=60705 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:15:0c:05:db:31:08:00 SRC=192.168.178.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0xC0 TTL=1 ID=60961 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:15:0c:05:db:31:08:00 SRC=192.168.178.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0xC0 TTL=1 ID=61217 DF OPT (94040000) PROTO=2
lp0: using parport0 (polling).
b44: eth0: Link is up at 100 Mbps, full duplex.
b44: eth0: Flow control is off for TX and off for RX.
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:15:0c:05:db:31:08:00 SRC=192.168.178.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0xC0 TTL=1 ID=61473 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:15:0c:05:db:31:08:00 SRC=192.168.178.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0xC0 TTL=1 ID=61729 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:15:0c:05:db:31:08:00 SRC=192.168.178.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0xC0 TTL=1 ID=61985 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:15:0c:05:db:31:08:00 SRC=192.168.178.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0xC0 TTL=1 ID=62241 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:15:0c:05:db:31:08:00 SRC=192.168.178.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0xC0 TTL=1 ID=62497 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:15:0c:05:db:31:08:00 SRC=192.168.178.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0xC0 TTL=1 ID=62753 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:15:0c:05:db:31:08:00 SRC=192.168.178.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0xC0 TTL=1 ID=63009 DF OPT (94040000) PROTO=2
SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.178.24 DST=194.25.136.14 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=62411 DF PROTO=TCP SPT=2683 DPT=80 WINDOW=1173 RES=0x00 ACK FIN URGP=0 OPT (0101080A002DB647FDCCE888)
SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT= MAC=00:17:08:40:f1:35:00:15:0c:05:db:31:08:00 SRC=194.25.136.14 DST=192.168.178.24 LEN=52 TOS=0x00 PREC=0x00 TTL=60 ID=1033 DF PROTO=TCP SPT=80 DPT=2683 WINDOW=16566 RES=0x00 ACK FIN URGP=0 OPT (0101080AFDD17E99002DB647)
SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT= MAC=00:17:08:40:f1:35:00:15:0c:05:db:31:08:00 SRC=194.25.136.14 DST=192.168.178.24 LEN=52 TOS=0x00 PREC=0x00 TTL=60 ID=1034 DF PROTO=TCP SPT=80 DPT=2683 WINDOW=16566 RES=0x00 ACK FIN URGP=0 OPT (0101080AFDD18076002DB647)
SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT= MAC=00:17:08:40:f1:35:00:15:0c:05:db:31:08:00 SRC=194.25.136.14 DST=192.168.178.24 LEN=52 TOS=0x00 PREC=0x00 TTL=60 ID=1035 DF PROTO=TCP SPT=80 DPT=2683 WINDOW=16566 RES=0x00 ACK FIN URGP=0 OPT (0101080AFDD18430002DB647)
SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.178.24 DST=194.25.136.14 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=62412 DF PROTO=TCP SPT=2683 DPT=80 WINDOW=1173 RES=0x00 ACK FIN URGP=0 OPT (0101080A002DBDCDFDCCE888)
SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT= MAC=00:17:08:40:f1:35:00:15:0c:05:db:31:08:00 SRC=194.25.136.14 DST=192.168.178.24 LEN=40 TOS=0x00 PREC=0x00 TTL=60 ID=0 DF PROTO=TCP SPT=80 DPT=2683 WINDOW=0 RES=0x00 RST URGP=0
SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.178.24 DST=194.25.136.14 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=62413 DF PROTO=TCP SPT=2683 DPT=80 WINDOW=1173 RES=0x00 ACK FIN URGP=0 OPT (0101080A002DCCD9FDCCE888)
SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT= MAC=00:17:08:40:f1:35:00:15:0c:05:db:31:08:00 SRC=194.25.136.14 DST=192.168.178.24 LEN=40 TOS=0x00 PREC=0x00 TTL=60 ID=0 DF PROTO=TCP SPT=80 DPT=2683 WINDOW=0 RES=0x00 RST URGP=0
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:15:0c:05:db:31:08:00 SRC=192.168.178.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0xC0 TTL=1 ID=63265 DF OPT (94040000) PROTO=2
SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.178.24 DST=194.25.136.14 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=62414 DF PROTO=TCP SPT=2683 DPT=80 WINDOW=1173 RES=0x00 ACK FIN URGP=0 OPT (0101080A002DEAF1FDCCE888)
SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT= MAC=00:17:08:40:f1:35:00:15:0c:05:db:31:08:00 SRC=194.25.136.14 DST=192.168.178.24 LEN=40 TOS=0x00 PREC=0x00 TTL=60 ID=0 DF PROTO=TCP SPT=80 DPT=2683 WINDOW=0 RES=0x00 RST URGP=0
SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.178.24 DST=194.25.136.14 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=62415 DF PROTO=TCP SPT=2683 DPT=80 WINDOW=1173 RES=0x00 ACK FIN URGP=0 OPT (0101080A002E2721FDCCE888)
SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT= MAC=00:17:08:40:f1:35:00:15:0c:05:db:31:08:00 SRC=194.25.136.14 DST=192.168.178.24 LEN=40 TOS=0x00 PREC=0x00 TTL=60 ID=0 DF PROTO=TCP SPT=80 DPT=2683 WINDOW=0 RES=0x00 RST URGP=0
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:15:0c:05:db:31:08:00 SRC=192.168.178.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0xC0 TTL=1 ID=63521 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:15:0c:05:db:31:08:00 SRC=192.168.178.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0xC0 TTL=1 ID=63777 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:15:0c:05:db:31:08:00 SRC=192.168.178.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0xC0 TTL=1 ID=64033 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:15:0c:05:db:31:08:00 SRC=192.168.178.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0xC0 TTL=1 ID=64289 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:15:0c:05:db:31:08:00 SRC=192.168.178.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0xC0 TTL=1 ID=64545 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:15:0c:05:db:31:08:00 SRC=192.168.178.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0xC0 TTL=1 ID=64801 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:15:0c:05:db:31:08:00 SRC=192.168.178.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0xC0 TTL=1 ID=65057 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:15:0c:05:db:31:08:00 SRC=192.168.178.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0xC0 TTL=1 ID=65313 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:15:0c:05:db:31:08:00 SRC=192.168.178.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0xC0 TTL=1 ID=34 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:15:0c:05:db:31:08:00 SRC=192.168.178.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0xC0 TTL=1 ID=290 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT= MAC=00:17:08:40:f1:35:00:15:0c:05:db:31:08:00 SRC=209.62.177.53 DST=192.168.178.24 LEN=314 TOS=0x00 PREC=0x00 TTL=121 ID=38078 DF PROTO=TCP SPT=80 DPT=5677 WINDOW=64203 RES=0x00 ACK PSH URGP=0 OPT (0101080A0003CE6E0032C73E)
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:15:0c:05:db:31:08:00 SRC=192.168.178.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0xC0 TTL=1 ID=546 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:15:0c:05:db:31:08:00 SRC=192.168.178.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0xC0 TTL=1 ID=802 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:15:0c:05:db:31:08:00 SRC=192.168.178.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0xC0 TTL=1 ID=1058 DF OPT .........

[Chris_TDCi]

.....(Teil3)
(94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:15:0c:05:db:31:08:00 SRC=192.168.178.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0xC0 TTL=1 ID=1314 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:15:0c:05:db:31:08:00 SRC=192.168.178.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0xC0 TTL=1 ID=1570 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:15:0c:05:db:31:08:00 SRC=192.168.178.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0xC0 TTL=1 ID=1826 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:15:0c:05:db:31:08:00 SRC=192.168.178.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0xC0 TTL=1 ID=2082 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:15:0c:05:db:31:08:00 SRC=192.168.178.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0xC0 TTL=1 ID=2338 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:15:0c:05:db:31:08:00 SRC=192.168.178.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0xC0 TTL=1 ID=2594 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:15:0c:05:db:31:08:00 SRC=192.168.178.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0xC0 TTL=1 ID=2850 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:15:0c:05:db:31:08:00 SRC=192.168.178.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0xC0 TTL=1 ID=3106 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:15:0c:05:db:31:08:00 SRC=192.168.178.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0xC0 TTL=1 ID=3362 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:15:0c:05:db:31:08:00 SRC=192.168.178.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0xC0 TTL=1 ID=3618 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:15:0c:05:db:31:08:00 SRC=192.168.178.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0xC0 TTL=1 ID=3874 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:15:0c:05:db:31:08:00 SRC=192.168.178.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0xC0 TTL=1 ID=4130 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:15:0c:05:db:31:08:00 SRC=192.168.178.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0xC0 TTL=1 ID=4386 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:15:0c:05:db:31:08:00 SRC=192.168.178.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0xC0 TTL=1 ID=4642 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:15:0c:05:db:31:08:00 SRC=192.168.178.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0xC0 TTL=1 ID=4898 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:15:0c:05:db:31:08:00 SRC=192.168.178.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0xC0 TTL=1 ID=5154 DF OPT (94040000) PROTO=2
Freezing cpus ...
Stopping tasks: ================================================== ================================================== ==============|
Shrinking memory... -\|/-\|done (68395 pages freed)
ACPI: PCI interrupt for device 0000:02:06.0 disabled
ACPI: PCI interrupt for device 0000:00:1d.7 disabled
ACPI: PCI interrupt for device 0000:00:1d.3 disabled
ACPI: PCI interrupt for device 0000:00:1d.2 disabled
ACPI: PCI interrupt for device 0000:00:1d.1 disabled
ACPI: PCI interrupt for device 0000:00:1d.0 disabled
ACPI: PCI interrupt for device 0000:00:1b.0 disabled

swsusp: Need to copy 54916 pages
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
swsusp: Restoring Highmem
ACPI: Transitioning device [C315] to D3
ACPI: Transitioning device [C315] to D3
PM: Writing back config space on device 0000:00:1b.0 at offset 1 (was 100006, writing 100000)
PCI: Enabling device 0000:00:1b.0 (0000 -> 0002)
ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 169
PCI: Setting latency timer of device 0000:00:1b.0 to 64
PCI: Setting latency timer of device 0000:00:1c.0 to 64
PCI: Setting latency timer of device 0000:00:1c.1 to 64
PCI: Setting latency timer of device 0000:00:1c.3 to 64
ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 20 (level, low) -> IRQ 50
PCI: Setting latency timer of device 0000:00:1d.0 to 64
usb usb1: root hub lost power or was reset
ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 177
PCI: Setting latency timer of device 0000:00:1d.1 to 64
usb usb2: root hub lost power or was reset
ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 193
PCI: Setting latency timer of device 0000:00:1d.2 to 64
usb usb3: root hub lost power or was reset
ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 19 (level, low) -> IRQ 185
PCI: Setting latency timer of device 0000:00:1d.3 to 64
usb usb4: root hub lost power or was reset
ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 20 (level, low) -> IRQ 50
PCI: Setting latency timer of device 0000:00:1d.7 to 64
usb usb5: root hub lost power or was reset
ehci_hcd 0000:00:1d.7: debug port 1
PCI: cache line size of 32 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
PM: Writing back config space on device 0000:00:1e.0 at offset 6 (was 20030200, writing 20060200)
PCI: Setting latency timer of device 0000:00:1e.0 to 64
PCI: Setting latency timer of device 0000:00:1f.2 to 64
PM: Writing back config space on device 0000:02:06.0 at offset f (was 3c4010b, writing 5c0010b)
PM: Writing back config space on device 0000:02:06.0 at offset 3 (was 824010, writing 82a820)
ACPI: PCI Interrupt 0000:02:06.0[A] -> GSI 18 (level, low) -> IRQ 193
pnp: Device 00:07 does not support activation.
pnp: Device 00:08 does not support activation.
synaptics reset failed
synaptics reset failed
synaptics reset failed
ata2: SATA link down (SStatus 0 SControl 0)
ata3: SATA link down (SStatus 0 SControl 0)
ata4: SATA link down (SStatus 0 SControl 0)
Restarting tasks... done
Thawing cpus ...
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: configured for UDMA/100
SCSI device sda: 234441648 512-byte hdwr sectors (120034 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: drive cache: write back
ACPI: Power Button (FF) [PWRF]
ACPI: Sleep Button (CM) [C238]
ACPI: Lid Switch [C231]
ieee1394: Initialized config rom entry `ip1394'
ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[185] MMIO=[f4101000-f41017ff] Max Packet=[2048] IR/IT contexts=[4/8]
VFS: busy inodes on changed media.
VFS: busy inodes on changed media.
b44: eth0: Link is up at 100 Mbps, full duplex.
b44: eth0: Flow control is off for TX and off for RX.
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:15:0c:05:db:31:08:00 SRC=192.168.178.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0xC0 TTL=1 ID=12834 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:15:0c:05:db:31:08:00 SRC=192.168.178.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0xC0 TTL=1 ID=13090 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:15:0c:05:db:31:08:00 SRC=192.168.178.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0xC0 TTL=1 ID=13346 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:15:0c:05:db:31:08:00 SRC=192.168.178.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0xC0 TTL=1 ID=13602 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:15:0c:05:db:31:08:00 SRC=192.168.178.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0xC0 TTL=1 ID=13858 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:15:0c:05:db:31:08:00 SRC=192.168.178.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0xC0 TTL=1 ID=14114 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:15:0c:05:db:31:08:00 SRC=192.168.178.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0xC0 TTL=1 ID=14370 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:15:0c:05:db:31:08:00 SRC=192.168.178.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0xC0 TTL=1 ID=14626 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:15:0c:05:db:31:08:00 SRC=192.168.178.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0xC0 TTL=1 ID=14882 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:15:0c:05:db:31:08:00 SRC=192.168.178.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0xC0 TTL=1 ID=15138 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:15:0c:05:db:31:08:00 SRC=192.168.178.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0xC0 TTL=1 ID=15394 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:15:0c:05:db:31:08:00 SRC=192.168.178.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0xC0 TTL=1 ID=15650 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:15:0c:05:db:31:08:00 SRC=192.168.178.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0xC0 TTL=1 ID=15906 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:15:0c:05:db:31:08:00 SRC=192.168.178.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0xC0 TTL=1 ID=16162 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:15:0c:05:db:31:08:00 SRC=192.168.178.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0xC0 TTL=1 ID=16418 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:15:0c:05:db:31:08:00 SRC=192.168.178.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0xC0 TTL=1 ID=16674 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:15:0c:05:db:31:08:00 SRC=192.168.178.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0xC0 TTL=1 ID=16930 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:15:0c:05:db:31:08:00 SRC=192.168.178.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0xC0 TTL=1 ID=17186 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT= MAC=00:17:08:40:f1:35:00:15:0c:05:db:31:08:00 SRC=209.62.177.53 DST=192.168.178.24 LEN=52 TOS=0x00 PREC=0x00 TTL=121 ID=14940 DF PROTO=TCP SPT=80 DPT=13923 WINDOW=65028 RES=0x00 ACK URGP=0 OPT (0101080A00077CC500525D3C)
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:15:0c:05:db:31:08:00 SRC=192.168.178.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0xC0 TTL=1 ID=17442 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:15:0c:05:db:31:08:00 SRC=192.168.178.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0xC0 TTL=1 ID=17698 DF OPT (94040000) PROTO=2
ieee80211_crypt: registered algorithm 'NULL'
ieee80211: 802.11 data/management/control stack, git-1.1.13
ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
ipw3945: Intel(R) PRO/Wireless 3945 Network Connection driver for Linux, 1.1.0d
ipw3945: Copyright(c) 2003-2006 Intel Corporation
b44: eth0: Link is up at 100 Mbps, full duplex.
b44: eth0: Flow control is off for TX and off for RX.
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:15:0c:05:db:31:08:00 SRC=192.168.178.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0xC0 TTL=1 ID=17954 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:15:0c:05:db:31:08:00 SRC=192.168.178.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0xC0 TTL=1 ID=18210 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:15:0c:05:db:31:08:00 SRC=192.168.178.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0xC0 TTL=1 ID=18466 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:15:0c:05:db:31:08:00 SRC=192.168.178.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0xC0 TTL=1 ID=18722 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:15:0c:05:db:31:08:00 SRC=192.168.178.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0xC0 TTL=1 ID=18978 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:15:0c:05:db:31:08:00 SRC=192.168.178.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0xC0 TTL=1 ID=19234 DF OPT (94040000) PROTO=2
Freezing cpus ...
Stopping tasks: ================================================== ================================================== ==============
stopping tasks timed out after 20 seconds (11 tasks remaining):
kseriod
pdflush
pdflush
kswapd0
kjournald
khubd
pccardd
kjournald
kauditd
kaffeine
lockd
Restarting tasks...<6> Strange, kseriod not stopped
Strange, pdflush not stopped
Strange, pdflush not stopped
Strange, kswapd0 not stopped
Strange, kjournald not stopped
Strange, khubd not stopped
Strange, pccardd not stopped
Strange, kjournald not stopped
Strange, kauditd not stopped
Strange, kaffeine not stopped
Strange, lockd not stopped
done
Thawing cpus ...
ACPI: Power Button (FF) [PWRF]
ACPI: Sleep Button (CM) [C238]
ACPI: Lid Switch [C231]
ieee1394: Initialized config rom entry `ip1394'
ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[185] MMIO=[f4101000-f41017ff] Max Packet=[2048] IR/IT contexts=[4/8]
b44: eth0: Link is up at 100 Mbps, full duplex.
b44: eth0: Flow control is off for TX and off for RX.
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:15:0c:05:db:31:08:00 SRC=192.168.178.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0xC0 TTL=1 ID=19490 DF OPT (94040000) PROTO=2
Freezing cpus ...
Stopping tasks: ================================================== ================================================== =======================|
Shrinking memory... -\|/-\|done (67945 pages freed)
ACPI: PCI interrupt for device 0000:02:06.0 disabled
ACPI: PCI interrupt for device 0000:00:1d.7 disabled
ACPI: PCI interrupt for device 0000:00:1d.3 disabled
ACPI: PCI interrupt for device 0000:00:1d.2 disabled
ACPI: PCI interrupt for device 0000:00:1d.1 disabled
ACPI: PCI interrupt for device 0000:00:1d.0 disabled
ACPI: PCI interrupt for device 0000:00:1b.0 disabled

swsusp: Need to copy 55712 pages
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
swsusp: Restoring Highmem
ACPI: Transitioning device [C313] to D3
ACPI: Transitioning device [C313] to D3
ACPI: Transitioning device [C315] to D3
ACPI: Transitioning device [C315] to D3
PM: Writing back config space on device 0000:00:1b.0 at offset 1 (was 100006, writing 100000)
PCI: Enabling device 0000:00:1b.0 (0000 -> 0002)
ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 169
PCI: Setting latency timer of device 0000:00:1b.0 to 64
PCI: Setting latency timer of device 0000:00:1c.0 to 64
PCI: Setting latency timer of device 0000:00:1c.1 to 64
PCI: Setting latency timer of device 0000:00:1c.3 to 64
ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 20 (level, low) -> IRQ 50
PCI: Setting latency timer of device 0000:00:1d.0 to 64
usb usb1: root hub lost power or was reset
ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 177
PCI: Setting latency timer of device 0000:00:1d.1 to 64
usb usb2: root hub lost power or was reset
ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 193
PCI: Setting latency timer of device 0000:00:1d.2 to 64
usb usb3: root hub lost power or was reset
ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 19 (level, low) -> IRQ 185
PCI: Setting latency timer of device 0000:00:1d.3 to 64
usb usb4: root hub lost power or was reset
ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 20 (level, low) -> IRQ 50
PCI: Setting latency timer of device 0000:00:1d.7 to 64
usb usb5: root hub lost power or was reset
ehci_hcd 0000:00:1d.7: debug port 1
PCI: cache line size of 32 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
PM: Writing back config space on device 0000:00:1e.0 at offset 6 (was 20030200, writing 20060200)
PCI: Setting latency timer of device 0000:00:1e.0 to 64
PCI: Setting latency timer of device 0000:00:1f.2 to 64
PM: Writing back config space on device 0000:02:06.0 at offset f (was 3c4010b, writing 5c0010b)
PM: Writing back config space on device 0000:02:06.0 at offset 3 (was 824010, writing 82a820)
ACPI: PCI Interrupt 0000:02:06.0[A] -> GSI 18 (level, low) -> IRQ 193
pnp: Device 00:07 does not support activation.
pnp: Device 00:08 does not support activation.
synaptics reset failed
synaptics reset failed
synaptics reset failed
ata2: SATA link down (SStatus 0 SControl 0)
ata3: SATA link down (SStatus 0 SControl 0)
ata4: SATA link down (SStatus 0 SControl 0)
Restarting tasks... done
Thawing cpus ...
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: configured for UDMA/100
SCSI device sda: 234441648 512-byte hdwr sectors (120034 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: drive cache: write back
ACPI: Power Button (FF) [PWRF]
ACPI: Sleep Button (CM) [C238]
ACPI: Lid Switch [C231]
ieee1394: Initialized config rom entry `ip1394'
ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[185] MMIO=[f4101000-f41017ff] Max Packet=[2048] IR/IT contexts=[4/8]
b44: eth0: Link is up at 100 Mbps, full duplex.
b44: eth0: Flow control is off for TX and off for RX.
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:15:0c:05:db:31:08:00 SRC=192.168.178.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0xC0 TTL=1 ID=58402 DF OPT (94040000) PROTO=2
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:15:0c:05:db:31:08:00 SRC=192.168.178.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0xC0 TTL=1 ID=58658 DF OPT (94040000) PROTO=2

[wOOx Technology]

das einzige was dort nach wlan aussieht sind diese module:

ipw3945 191520 0
ieee80211 34632 1 ipw3945
ieee80211_crypt 10112 1 ieee80211

^ das hilft wahrscheinlich nicht.

Ich kenn mich mit der Unterstützung von wLan Treibern unter Suse 10 nicht weiter aus. daher kann ich dir nur sagen, wenn du es zum laufen bringen willst, sollte das über den ndiswrapper problemlos gehen.

[caspartroy]

hast du die wahrscheinlich benötigte firmware installiert?
ich hatte auch ein hp-notebook, das hat mit ipw3945 treiber (+ firmware) funktioniert, allerdings musste ich irgendeine einstellung zum wlan oder wlan-button im bios ändern (vielleicht sowas wie "button abschalten" oder "wlan immer an", habs leider vergessen).

[einherjar]

Such mal in YAST nach 3945

Bei meinem HP war es so, daß YAST einfach ein PAket bezüglich dieses WLAN-Chips nicht mit installiert hatte.

Wenn da irgend ein Paket nicht mitinstalliert wurde, einfach anhaken und Neustart, dann geht´s wahrscheinlich. (War bei mir so)

Weiterhin immer "traditionelle Methode mit ifup" verwenden.

So jedenfalls meine Erfahrung.

[Chris_TDCi]

Hat nix geholfen.
"traditionelle Methode mit ifup" ist gewählt,
alles mit 3945 und ieee80211 ist installiert.

Hat denn irgendwer schon die Intel PRO 3945 ABG mit openSUSE 10.2 ans laufen bekommen?

HowTo's habe ich auch gelesen.
Wenn ich in den Deamon starten will passiert das:

15:41 notebook:/ # ipw3945d
ipw3945d - regulatory daemon
Copyright (C) 2005-2006 Intel Corporation. All rights reserved.
version: 1.7.18
2006-12-21 15:42:00: ERROR: Could not find Intel PRO/Wireless 3945ABG Network Connection
15:42 notebook:/ #

[Rain_maker]

Jupp hat schon jemand:

http://www.linux-club.de/forum19.html

Aber zuerst würde ich das hier lesen:

http://www.linuxforen.de/forums/showthread.php?t=224227&highlight=ipw3945d

Nachlesen und testen, ob das dort geschriebene hilft.

Ansonsten:



uname -r

rpm -qa| egrep -i 'ipw|3945'

/usr/sbin/iwconfig

/subin/ifconfig

sudo egrep -i 'ipw|radio' /var/log/messages

dmesg | egrep -i 'ipw|radio'

sudo cat /etc/sysconfig/network/ifcfg-wlan*

cat /etc/udev/rules.d/*persistent*=> Ausagen posten.

Greetz,

RM

[othan]

hmm... mich mach dieser Eintrag in lspci etwas stutzig.

> 10:00.0 Network controller: Broadcom Corporation Dell Wireless 1390 WLAN Mini-PCI Card (rev 01)

Warum steht da Dell?
Hast Du die Mini-PCI Karte schonmal ausgebaut und nachgeshen ob es sich wirklich um einen ipw3945 handelt?

Welcher Kernel ist installiert? -> "uname -a"

Bei mir lief der ipw3945 mit kernel 2.6.18.x problemlos

Hast Du einen "Centrino" aufkleber drauf? das ist normalerweise auch ein hinweis auf eine Intel-WLAN karte.

[Rain_maker]

*ARGH*

Du hast natürlich recht.

*Rauchige Stimme aufsetz*

"Das ist keine Intel", Du hast einen BRAODCOM WLAN-Adapter.

Laut Tante Google:

http://www.google.de/search?q=Network+controller%3A+Broadcom+Corporatio n+Dell+Wireless+1390+WLAN+Mini-PCI+Card&ie=UTF-8&oe=UTF-8

=> http://gentoo-wiki.com/HARDWARE_Gentoo_on_HP_Pavillion_dv6119us


Broadcom Dell Wireless 1390 WLAN Works bcm43xx based wird dieser Treiber benötigt, dazu noch der bcm43xx-firmware-cutter und die entsprechenden .sys-Files des Windowstreibers um eine Linux-Firmware zu erzeugen.

Lesen:

http://bcm43xx.berlios.de/

openSUSE10.2 liefert IIRC eine fertiges Firmwarecutter Script mit, da musst Du aber selbst nach suchen (Paketmanager).

Greetz,

RM

[othan]

*ARGH*

Du hast natürlich recht.

*Rauchige Stimme aufsetz*

"Das ist keine Intel", Du hast einen BRAODCOM WLAN-Adapter.

Laut Tante Google:

http://www.google.de/search?q=Network+controller%3A+Broadcom+Corporatio n+Dell+Wireless+1390+WLAN+Mini-PCI+Card&ie=UTF-8&oe=UTF-8

=> http://gentoo-wiki.com/HARDWARE_Gentoo_on_HP_Pavillion_dv6119us

wird dieser Treiber benötigt, dazu noch der bcm43xx-firmware-cutter und die entsprechenden .sys-Files des Windowstreibers um eine Linux-Firmware zu erzeugen.

Lesen:

http://bcm43xx.berlios.de/

openSUSE10.2 liefert IIRC eine fertiges Firmwarecutter Script mit, da musst Du aber selbst nach suchen (Paketmanager).

Greetz,

RM


Na dann viel spass beim einrichten :D
Ich hatte soviele Probleme mit meiner Broadcom Karte (im alten notebook), dass ich mir eine ipw2200 gekauft habe.

ist zwar nicht das gelbe vom ei, aber immerhin rennt die ohne probleme ;)

[Rain_maker]

Im Notfall gäbe es ja auch noch ndiswrapper für diese Karte.


Ich hatte soviele Probleme mit meiner Broadcom Karte (im alten notebook), dass ich mir eine ipw2200 gekauft habe.

Dito, gute Wahl.


ist zwar nicht das gelbe vom ei,
? Wieso nicht?

Firmware installieren, Karte einrichten, fertig (seit SuSE 9.2 auf meinem Schleppi der Fall gewesen).


aber immerhin rennt die ohne probleme

Eben.

Greetz,

RM

[wiefra3]

Hallo,
habe schon Tage gegoogelt und nur Fehlerbeschreibungen gefunden bei denen Yast das WLan erkannt hat - ist bei mir aber nicht.
LAN funktioniert - nur WLan nicht.
Ist diese Notebook hier: http://www.amazon.de/Hewlett-Packard-RH621ES-Notebook-1-66GHz/dp/tech-data/B000JF8P1W/ref=de_a_smtd/303-9812663-0047420



Bei dem Notebook meiner Frau war ein extra einschalter am Gerät...wo mit man WLan überhaupt erstmal mit Aktiviert, bevor man es nutze konnte..

Gruß Frank

[Chris_TDCi]

Ja, das machte mich auch stutzig (die Dell Karte).
Da ich wegen des nicht laufenden WinXP sowieso den HP-Support dran hatte hab ich nach der WLan Karte gefragt, soll eine Intel sein - anhand der Seriennummer identifiziert.
Aber selbst auf der Rückseite des Notebooks findet sich auf den diversen Aufklebern keine Spur von Intel WLan.
Da steht was von "Contains Broadcom Corporation Radio Model BCM94311MCG" ??
Da das Handbuch nur im WinXP zu finden sein soll - was ja nicht läuftm - kann ich nicht mal schnell nachgucken.
Aber jetzt versuche ich mal den besagten BROADCOM Adapter zu installieren...

[Chris_TDCi]

So, habs endlich geschafft.
Wie das lspci ja schon sagte ist das gar keine Intel sondern eine Broadcom (trotz Verkaufsbeschreibung).
Als ich Diese dann per ndiswrapper installiert habe, ging's trotzdem nicht.
Dann fand ich heraus das jetzt beide installiert waren, ich ging davon aus das die Alte automatisch gelöscht werden würde.
Das habe ich manuell gemacht und ich sah zum ersten mal die blaue LED der WLan-Taste.
Connect zur Fritzbox habe ich dennoch nicht bekommen.
Am Heiligabend dann das Ding mit zu Daddy genommen und siehe da, es geht (ebenfalls WLan aber der Router von Arcor).
Ich dann wieder zur Fritzbox und einen Einstellungsfehler gefunden (wer das wohl war?! :-D )
Nu denn, jetzt gehts,
Frohe Weihnachten!

Und danke an Alle die geholfen haben, Chris.......

[othan]

.....
? Wieso nicht?

Firmware installieren, Karte einrichten, fertig (seit SuSE 9.2 auf meinem Schleppi der Fall gewesen).
....


Da ich ab und zu IT-Unterricht gebe, mache ich damit sicherheitstechnische Analysen von Wireless-Netzen und dafür ist die Atheros besser geeignet ;)

[tomi-w80]

@Chris_TDCi: Wie hast du die Karte nun ans Laufen bekommen? Mit den Windowstreibern? Ich habe das gleiche Notebook und auch hier ist der Broadcom Chipsatz für WLAN verbaut. Die Treiber von der Homepage von HP geben aber nur *.exe Dateien aus. Muss ich die auf einer Windowsmaschine erst irgendwie entpacken? CDs waren bei meinem Notebook nicht dabei :( Hatte die Festplatte auch komplett formatiert um den Rechner von dem MS System zu befreien. Ich wär echt dankbar, wenn du mir dazu noch einn Tipp geben könntest.

Danke und Gruß
Thomas

[Rain_maker]

http://en.opensuse.org/SDB:Broadcom_(BCM4306)_WLAN_Installation_under_SUS E

Greetz,

RM

[Chris_TDCi]

@Chris_TDCi: Wie hast du die Karte nun ans Laufen bekommen? ...

Hi Thomas,
Hat es mittlerweile geklappt mit WLan?

[bla!zilla]

Die EXE kann mit cabextract entpackt werden. Sieh auch das den Link von Rain_maker.

[dominiks]

Also ich habe meine IPW3945 ohne Probleme unter OpenSUSE 10.2 am laufen. Wurde bei der Installation sauber erkannt und alle Pakete waren gleich installiert. Nur noch die Konfiguration eingeben und alles lief.
Seit ca. 1 Woche läuft auch alles mit KNetworkmanager, gibt eigentlich keine Probleme.

[tomi-w80]

Hi Chris_TDCi,

nein, ich habe meine alte PCMCIA Netgearkarte rausgekramt, die funktioniert unterstüzt aber kein WPA :(

Habe versucht nach den Anleitungen mit den Windowstreibern die onboard Karte zum laufen zu bekommen, jedoch ohne Erfolg. Ich nutze den Networkmanager, da ich in der Firma ein festes LAN habe und zu Hause über WLAN online gehe. Mit der Netgearkarte gehts super, Karte rein, Schlüssel kopieren, fertig. Die kann aber nur 11 MBit und eben kein WPA. Der Bluetoothchip im Notebook läuft super, warum nur das WLAN Ding nicht... ???

Gruß
Thomas

[Chris_TDCi]

Thomas, ich weiß nicht mehr im Einzelnen die Schritte die ich durchgeführt hatte.
Ich erinnere mich aber daran dass ich zwei Treiber mit ndiswrapper im System hatte weshalb das nicht geklappt hat.
Lösch daher alle Treiber und fang von vorne an:
ein 'ndiswrapper -l' (Buchstabe L für list) bringt folgendes:

11:59 notebook:~ # ndiswrapper -l
bcmwl5 : driver installed
device (14E4:4311) present
12:00 notebook:~ #
den Treiber in diesem Fall löschen macht:

ndiswrapper -r bcmwl5
Stehen da mehrere, alle löschen (deine PCMCIA Karte natürlich vorher abstecken).
Dann gehst Du nach folgender Anleitung vor: http://de.opensuse.org/SDB:Ndiswrapper.
Klappt das nicht nimmst Du die englische weiter oben, die ist neuer. Ich meine aber die Deutsche genommen zu haben.

Bist Du Dir 100%ig sicher welches WLan Du hast?
Wenn nicht: mach mal ein 'lspci'

Wenn's nicht klappt meld Dich nochmal

MfG, Chris......

[Chris_TDCi]

Wer lesen kann ist klar im Vorteil ;-)
Du hast das Gleiche Notebook wie ich? Nicht ganz, denn Du hast Bluetooth, was meins nicht hat.
Vielleicht hast Du eine andere WLan Karte. Wie gesagt, mit lspci vergewissern.

MfG, Chris...