xxbifixx
05.12.06, 13:14
hi@all
habe probleme !!!
wenn ich in VHCS ein user anlege zb. user1
solde ich mit user1.mega-space.dyndns.org auf diese seite kommen
da wird jedoch immer "seite kann ned angezeit werden" angezeigt
und ich komm nicht dahinder woran es liegt
ich habe debian sarge und VHCS Vers. "vhcs2-2.4.7.1"
könnte mir einer von euch vieleicht helfen
ich poste auch mal die config von apache 2 server und die config von der vhcs
apache2.conf
# Based upon the NCSA server configuration files originally by Rob McCool.
# Changed extensively for the Debian package by Daniel Stone <daniel@sfarc.net>
# and also by Thom May <thom@debian.org>.
# ServerRoot: The top of the directory tree under which the server's
# configuration, error, and log files are kept.
#
# NOTE! If you intend to place this on an NFS (or otherwise network)
# mounted filesystem then please read the LockFile documentation
# (available at <URL:http://www.apache.org/docs/mod/core.html#lockfile>);
# you will save yourself a lot of trouble.
ServerRoot "/etc/apache2"
# The LockFile directive sets the path to the lockfile used when Apache
# is compiled with either USE_FCNTL_SERIALIZED_ACCEPT or
# USE_FLOCK_SERIALIZED_ACCEPT. This directive should normally be left at
# its default value. The main reason for changing it is if the logs
# directory is NFS mounted, since the lockfile MUST BE STORED ON A LOCAL
# DISK. The PID of the main server process is automatically appended to
# the filename.
LockFile /var/lock/apache2/accept.lock
# PidFile: The file in which the server should record its process
# identification number when it starts.
PidFile /var/run/apache2.pid
# Timeout: The number of seconds before receives and sends time out.
TimeOut 300
# KeepAlive: Whether or not to allow persistent connections (more than
# one request per connection). Set to "Off" to deactivate.
KeepAlive on
# MaxKeepAliveRequests: The maximum number of requests to allow
# during a persistent connection. Set to 0 to allow an unlimited amount.
# We recommend you leave this number high, for maximum performance.
MaxKeepAliveRequests 100
# KeepAliveTimeout: Number of seconds to wait for the next request from the
# same client on the same connection.
KeepAliveTimeout 15
##
## Server-Pool Size Regulation (MPM specific)
##
# prefork MPM
# StartServers ......... number of server processes to start
# MinSpareServers ...... minimum number of server processes which are kept spare
# MaxSpareServers ...... maximum number of server processes which are kept spare
# MaxClients ........... maximum number of server processes allowed to start
# MaxRequestsPerChild .. maximum number of requests a server process serves
<IfModule prefork.c>
StartServers 5
MinSpareServers 5
MaxSpareServers 10
MaxClients 20
MaxRequestsPerChild 0
</IfModule>
# pthread MPM
# StartServers ......... initial number of server processes to start
# MaxClients ........... maximum number of server processes allowed to start
# MinSpareThreads ...... minimum number of worker threads which are kept spare
# MaxSpareThreads ...... maximum number of worker threads which are kept spare
# ThreadsPerChild ...... constant number of worker threads in each server process
# MaxRequestsPerChild .. maximum number of requests a server process serves
<IfModule worker.c>
StartServers 2
MaxClients 150
MinSpareThreads 25
MaxSpareThreads 75
ThreadsPerChild 25
MaxRequestsPerChild 0
</IfModule>
# perchild MPM
# NumServers ........... constant number of server processes
# StartThreads ......... initial number of worker threads in each server process
# MinSpareThreads ...... minimum number of worker threads which are kept spare
# MaxSpareThreads ...... maximum number of worker threads which are kept spare
# MaxThreadsPerChild ... maximum number of worker threads in each server process
# MaxRequestsPerChild .. maximum number of connections per server process (then it dies)
<IfModule perchild.c>
NumServers 5
StartThreads 5
MinSpareThreads 5
MaxSpareThreads 10
MaxThreadsPerChild 20
MaxRequestsPerChild 0
AcceptMutex fcntl
</IfModule>
User www-data
Group www-data
# The following directives define some format nicknames for use with
# a CustomLog directive (see below).
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
LogFormat "%h %l %u %t \"%r\" %>s %b" common
LogFormat "%{Referer}i -> %U" referer
LogFormat "%{User-agent}i" agent
# Global error log.
ErrorLog /var/log/apache2/error.log
# Include module configuration:
Include /etc/apache2/mods-enabled/*.load
Include /etc/apache2/mods-enabled/*.conf
# Include all the user configurations:
Include /etc/apache2/httpd.conf
# Include ports listing
Include /etc/apache2/ports.conf
# Include generic snippets of statements
Include /etc/apache2/conf.d/[^.#]*
#Let's have some Icons, shall we?
Alias /icons/ "/usr/share/apache2/icons/"
<Directory "/usr/share/apache2/icons">
Options Indexes MultiViews
AllowOverride all
Order allow,deny
Allow from all
</Directory>
# Set up the default error docs.
#
# Customizable error responses come in three flavors:
# 1) plain text 2) local redirects 3) external redirects
#
# Some examples:
#ErrorDocument 500 "The server made a boo boo."
#ErrorDocument 404 /missing.html
#ErrorDocument 404 "/cgi-bin/missing_handler.pl"
#ErrorDocument 402 http://www.example.com/subscription_info.html
#
#
# Putting this all together, we can Internationalize error responses.
#
# We use Alias to redirect any /error/HTTP_<error>.html.var response to
# our collection of by-error message multi-language collections. We use
# includes to substitute the appropriate text.
#
# You can modify the messages' appearance without changing any of the
# default HTTP_<error>.html.var files by adding the line;
#
# Alias /error/include/ "/your/include/path/"
#
# which allows you to create your own set of files by starting with the
# /usr/local/apache2/error/include/ files and
# copying them to /your/include/path/, even on a per-VirtualHost basis.
#
<IfModule mod_negotiation.c>
<IfModule mod_include.c>
Alias /error/ "/usr/share/apache2/error/"
<Directory "/usr/share/apache2/error">
AllowOverride all
Options IncludesNoExec
AddOutputFilter Includes html
AddHandler type-map var
Order allow,deny
Allow from all
LanguagePriority en es de fr
ForceLanguagePriority Prefer Fallback
</Directory>
ErrorDocument 400 /error/HTTP_BAD_REQUEST.html.var
ErrorDocument 401 /error/HTTP_UNAUTHORIZED.html.var
ErrorDocument 403 /error/HTTP_FORBIDDEN.html.var
ErrorDocument 404 /error/HTTP_NOT_FOUND.html.var
ErrorDocument 405 /error/HTTP_METHOD_NOT_ALLOWED.html.var
ErrorDocument 408 /error/HTTP_REQUEST_TIME_OUT.html.var
ErrorDocument 410 /error/HTTP_GONE.html.var
ErrorDocument 411 /error/HTTP_LENGTH_REQUIRED.html.var
ErrorDocument 412 /error/HTTP_PRECONDITION_FAILED.html.var
ErrorDocument 413 /error/HTTP_REQUEST_ENTITY_TOO_LARGE.html.var
ErrorDocument 414 /error/HTTP_REQUEST_URI_TOO_LARGE.html.var
ErrorDocument 415 /error/HTTP_SERVICE_UNAVAILABLE.html.var
ErrorDocument 500 /error/HTTP_INTERNAL_SERVER_ERROR.html.var
ErrorDocument 501 /error/HTTP_NOT_IMPLEMENTED.html.var
ErrorDocument 502 /error/HTTP_BAD_GATEWAY.html.var
ErrorDocument 503 /error/HTTP_SERVICE_UNAVAILABLE.html.var
ErrorDocument 506 /error/HTTP_VARIANT_ALSO_VARIES.html.var
</IfModule>
</IfModule>
DirectoryIndex index.html index.cgi index.pl index.php index.xhtml
# UserDir is now a module
#UserDir public_html
#UserDir disabled root
#<Directory /home/*/public_html>
# AllowOverride FileInfo AuthConfig Limit
# Options Indexes SymLinksIfOwnerMatch IncludesNoExec
#</Directory>
AccessFileName .htaccess
<Files ~ "^\.ht">
Order allow,deny
Deny from all
</Files>
UseCanonicalName off
TypesConfig /etc/mime.types
DefaultType text/plain
HostNameLookups off
IndexOptions FancyIndexing VersionSort
AddIconByEncoding (CMP,/icons/compressed.gif) x-compress x-gzip
AddIconByType (TXT,/icons/text.gif) text/*
AddIconByType (IMG,/icons/image2.gif) image/*
AddIconByType (SND,/icons/sound2.gif) audio/*
AddIconByType (VID,/icons/movie.gif) video/*
# This really should be .jpg.
AddIcon /icons/binary.gif .bin .exe
AddIcon /icons/binhex.gif .hqx
AddIcon /icons/tar.gif .tar
AddIcon /icons/world2.gif .wrl .wrl.gz .vrml .vrm .iv
AddIcon /icons/compressed.gif .Z .z .tgz .gz .zip
AddIcon /icons/a.gif .ps .ai .eps
AddIcon /icons/layout.gif .html .shtml .htm .pdf
AddIcon /icons/text.gif .txt
AddIcon /icons/c.gif .c
AddIcon /icons/p.gif .pl .py
AddIcon /icons/f.gif .for
AddIcon /icons/dvi.gif .dvi
AddIcon /icons/uuencoded.gif .uu
AddIcon /icons/script.gif .conf .sh .shar .csh .ksh .tcl
AddIcon /icons/tex.gif .tex
AddIcon /icons/bomb.gif core
AddIcon /icons/back.gif ..
AddIcon /icons/hand.right.gif README
AddIcon /icons/folder.gif ^^DIRECTORY^^
AddIcon /icons/blank.gif ^^BLANKICON^^
# This is from Matty J's patch. Anyone want to make the icons?
#AddIcon /icons/dirsymlink.jpg ^^SYMDIR^^
#AddIcon /icons/symlink.jpg ^^SYMLINK^^
DefaultIcon /icons/unknown.gif
ReadmeName README.html
HeaderName HEADER.html
IndexIgnore .??* *~ *# HEADER* RCS CVS *,t
AddEncoding x-compress Z
AddEncoding x-gzip gz tgz
AddLanguage da .dk
AddLanguage nl .nl
AddLanguage en .en
AddLanguage et .et
AddLanguage fr .fr
AddLanguage de .de
AddLanguage el .el
AddLanguage it .it
AddLanguage ja .ja
AddLanguage pl .po
AddLanguage ko .ko
AddLanguage pt .pt
AddLanguage no .no
AddLanguage pt-br .pt-br
AddLanguage ltz .ltz
AddLanguage ca .ca
AddLanguage es .es
AddLanguage sv .se
AddLanguage cz .cz
AddLanguage ru .ru
AddLanguage tw .tw
AddLanguage zh-tw .tw
LanguagePriority en da nl et fr de el it ja ko no pl pt pt-br ltz ca es sv tw
#AddDefaultCharset ISO-8859-1
AddCharset ISO-8859-1 .iso8859-1 .latin1
AddCharset ISO-8859-2 .iso8859-2 .latin2 .cen
AddCharset ISO-8859-3 .iso8859-3 .latin3
AddCharset ISO-8859-4 .iso8859-4 .latin4
AddCharset ISO-8859-5 .iso8859-5 .latin5 .cyr .iso-ru
AddCharset ISO-8859-6 .iso8859-6 .latin6 .arb
AddCharset ISO-8859-7 .iso8859-7 .latin7 .grk
AddCharset ISO-8859-8 .iso8859-8 .latin8 .heb
AddCharset ISO-8859-9 .iso8859-9 .latin9 .trk
AddCharset ISO-2022-JP .iso2022-jp .jis
AddCharset ISO-2022-KR .iso2022-kr .kis
AddCharset ISO-2022-CN .iso2022-cn .cis
AddCharset Big5 .Big5 .big5
# For russian, more than one charset is used (depends on client, mostly):
AddCharset WINDOWS-1251 .cp-1251 .win-1251
AddCharset CP866 .cp866
AddCharset KOI8-r .koi8-r .koi8-ru
AddCharset KOI8-ru .koi8-uk .ua
AddCharset ISO-10646-UCS-2 .ucs2
AddCharset ISO-10646-UCS-4 .ucs4
AddCharset UTF-8 .utf8
AddCharset GB2312 .gb2312 .gb
AddCharset utf-7 .utf7
AddCharset utf-8 .utf8
AddCharset big5 .big5 .b5
AddCharset EUC-TW .euc-tw
AddCharset EUC-JP .euc-jp
AddCharset EUC-KR .euc-kr
AddCharset shift_jis .sjis
#AddType application/x-httpd-php .php
#AddType application/x-httpd-php-source .phps
AddType application/x-tar .tgz
# To use CGI scripts outside /cgi-bin/:
#
#AddHandler cgi-script .cgi
# To use server-parsed HTML files
#
<FilesMatch "\.shtml(\..+)?$">
SetOutputFilter INCLUDES
</FilesMatch>
# If you wish to use server-parsed imagemap files, use
#
#AddHandler imap-file map
BrowserMatch "Mozilla/2" nokeepalive
BrowserMatch "MSIE 4\.0b2;" nokeepalive downgrade-1.0 force-response-1.0
BrowserMatch "RealPlayer 4\.0" force-response-1.0
BrowserMatch "Java/1\.0" force-response-1.0
BrowserMatch "JDK/1\.0" force-response-1.0
#
# The following directive disables redirects on non-GET requests for
# a directory that does not include the trailing slash. This fixes a
# problem with Microsoft WebFolders which does not appropriately handle
# redirects for folders with DAV methods.
#
BrowserMatch "Microsoft Data Access Internet Publishing Provider" redirect-carefully
BrowserMatch "^WebDrive" redirect-carefully
BrowserMatch "^gnome-vfs" redirect-carefully
BrowserMatch "^WebDAVFS/1.[012]" redirect-carefully
# Allow server status reports, with the URL of http://servername/server-status
# Change the ".your_domain.com" to match your domain to enable.
#
#<Location /server-status>
# SetHandler server-status
# Order deny,allow
# Deny from all
# Allow from .your_domain.com
#</Location>
# Allow remote server configuration reports, with the URL of
# http://servername/server-info (requires that mod_info.c be loaded).
# Change the ".your_domain.com" to match your domain to enable.
#
#<Location /server-info>
# SetHandler server-info
# Order deny,allow
# Deny from all
# Allow from .your_domain.com
#</Location>
# Include the virtual host configurations:
Include /etc/apache2/sites-enabled/[^.#]*
ServerName mega-space.dyndns.org
nun die hddpd.conf
# This is here for backwards compatability reasons and to support
# installing 3rd party modules directly via apxs2, rather than
# through the /etc/apache2/mods-{available,enabled} mechanism.
#
#LoadModule mod_placeholder /usr/lib/apache2/modules/mod_placeholder.so
Include /etc/apache2/sites-available/vhcs2.conf
nun die vhcs2.conf
#
# Misc config variables;
#
BuildDate = 03.01.2006
# DFtpDir = /var/www/virtual/
# FtpShell = /bin/bash
Version = 2.4.7.1
VersionH = 2.4 Spartacus
LOGIN_TIME_OUT = 20
DEFAULT_ADMIN_ADDRES =
SERVER_HOSTNAME = hier meine domain
BASE_SERVER_IP = xx.xxx.xxx.xxx
MR_LOCK_FILE = /tmp/vhcs2.lock
CMD_HOSTNAME = /bin/hostname
CMD_IFCONFIG = /sbin/ifconfig
CMD_USERADD = /usr/sbin/useradd
CMD_USERDEL = /usr/sbin/userdel
CMD_GROUPADD = /usr/sbin/groupadd
CMD_GROUPDEL = /usr/sbin/groupdel
CMD_MYSQL = /usr/bin/mysql
FTPD_CONF_FILE = /etc/proftpd.conf
CMD_CHOWN = /bin/chown
#
# SQL backend variables;
#
DATABASE_TYPE = mysql
DATABASE_HOST = localhost
DATABASE_NAME = vhcs2
DATABASE_PASSWORD = heir mein datenbank pw
DATABASE_USER = hier der db_user
DATABASE_DIR = /var/lib/mysql
#
# Main situation variables;
#
ROOT_DIR = /var/www/vhcs2
CONF_DIR = /etc/vhcs2
LOG_DIR = /var/log/vhcs2
#
# BIND data.
#
BIND_CONF_FILE = /etc/bind/named.conf
BIND_DB_DIR = /var/cache/bind
SECONDARY_DNS = 212.114.153.1
#
# APACHE data.
#
#
# APACHE config data.
#
APACHE_CMD = /usr/sbin/apache2
APACHE_NAME = apache2
APACHE_RESTART_TRY = 3
APACHE_WWW_DIR = /var/www/virtual
APACHE_LOG_DIR = /var/log/apache2
APACHE_USERS_LOG_DIR = /var/log/apache2/users
APACHE_BACKUP_LOG_DIR = /var/log/apache2/backup
APACHE_CONF_FILE = /etc/apache2/sites-available/vhcs2.conf
GUI_ROOT_DIR = /var/www/vhcs2/gui
PEAR_DIR = /usr/share/php
CMD_PS = /bin/ps
CMD_WC = /usr/bin/wc
APACHE_SUEXEC_MIN_UID = 2000
APACHE_SUEXEC_MIN_GID = 2000
APACHE_SUEXEC_USER_PREF = vu
#
# APACHE directory data.
#
APACHE_USER = www-data
APACHE_GROUP = www-data
#
# Postfix MTA Data.
#
POSTFIX_CONF_FILE = /etc/postfix/main.cf
POSTFIX_MASTER_CONF_FILE = /etc/postfix/master.cf
MTA_LOCAL_MAIL_DIR = /var/mail
MTA_VIRTUAL_MAIL_DIR = /var/mail/virtual
MTA_LOCAL_ALIAS_HASH = /etc/aliases
MTA_VIRTUAL_CONF_DIR = /etc/postfix/vhcs2
MTA_VIRTUAL_ALIAS_HASH = /etc/postfix/vhcs2/aliases
MTA_VIRTUAL_DMN_HASH = /etc/postfix/vhcs2/domains
MTA_VIRTUAL_MAILBOX_HASH = /etc/postfix/vhcs2/mailboxes
MTA_TRANSPORT_HASH = /etc/postfix/vhcs2/transport
MTA_SENDER_ACCESS_HASH = /etc/postfix/vhcs2/sender-access
MTA_MAILBOX_MIN_UID = 1010
MTA_MAILBOX_UID = 1010
MTA_MAILBOX_UID_NAME = vmail
MTA_MAILBOX_GID = 8
MTA_MAILBOX_GID_NAME = mail
MTA_SASLDB_LOCAL_DOMAIN = vhcs.net
MTA_SASLDB_FILE = /var/spool/postfix/etc/sasldb2
ETC_SASLDB_FILE = /etc/sasldb2
CMD_SASLDB_LISTUSERS2 = /usr/sbin/sasldblistusers2
CMD_SASLDB_PASSWD2 = /usr/sbin/saslpasswd2
CMD_POSTMAP = /usr/sbin/postmap
CMD_NEWALIASES = /usr/bin/newaliases
CMD_ECHO = /bin/echo
CMD_LN = /bin/ln
#
# Courier IMAP/POP3 Data.
#
COURIER_CONF_DIR = /etc/courier
AUTHLIB_CONF_DIR = /etc/courier
CMD_MAKEUSERDB = /usr/sbin/makeuserdb
#
# Crontab delayed tasks.
#
BACKUP_HOUR = 23
BACKUP_MINUTE = 40
BACKUP_ROOT_DIR = /var/www/vhcs2/engine/backup
CMD_CRONTAB = /usr/bin/crontab
#
# Backup tasks manager.
#
CMD_TAR = /bin/tar
CMD_MV = /bin/mv
CMD_RM = /bin/rm
CMD_DU = /usr/bin/du
#
# Service manager.
#
CMD_NAMED = /etc/init.d/bind9
CMD_MTA = /etc/init.d/postfix
CMD_HTTPD = /usr/sbin/apache2ctl
CMD_AUTHD = /etc/init.d/courier-authdaemon
CMD_IMAP = /etc/init.d/courier-imap
CMD_POP = /etc/init.d/courier-pop
CMD_AMAVIS = no
CMD_FTPD = /etc/init.d/proftpd
CMD_VHCS2D = /etc/init.d/vhcs2_daemon
CMD_VHCS2N = /etc/init.d/vhcs2_network
#
# Server traffic manager.
#
CMD_IPTABLES = /sbin/iptables
#
# Virtual traffic manager.
#
CMD_CP = /bin/cp
CMD_DIFF = /usr/bin/diff
CMD_GREP = /bin/grep
CMD_CAT = /bin/cat
CMD_AWK = /usr/bin/awk
CMD_PFLOGSUMM = /usr/sbin/maillogconvert.pl
TRAFF_LOG_DIR = /var/log
FTP_TRAFF_LOG = ftp_traff.log
MAIL_TRAFF_LOG = mail.log
MAIL_LOG_INC_AMAVIS = 0
PREV_TRAFF_LOG_MAX_SIZE = 10485760
QUOTA_ROOT_DIR = /var/www/vhcs2/engine/quota
TRAFF_ROOT_DIR = /var/www/vhcs2/engine/traffic
TOOLS_ROOT_DIR = /var/www/vhcs2/engine/tools
#
USER_INITIAL_LANG = lang_English
USER_INITIAL_THEME = modern_blue
USER_INITIAL_THEME_COLOR = blue
USER_LAYOUT_ID = 1
VHCS_LICENSE = VHCS<sup>®</sup> Pro v2.4.7.1<br>build: 2006-01-03<br>Spartacus
MINIMAL_FTP_UID = 2000
MINIMAL_FTP_GID = 2000
FTP_USERNAME_SEPARATOR = @
FTP_HOMEDIR = /var/www/virtual
FTP_SHELL = /bin/bash
IPS_LOGO_PATH = ../themes/user_logos
VHCS_SUPPORT_SYSTEM = yes
VHCS_SUPPORT_SYSTEM_PATH = support_system.php
VHCS_SUPPORT_SYSTEM_TARGET =
MYSQL_PREFIX = yes
MYSQL_PREFIX_TYPE =
WEBMAIL_PATH = ../tools/webmail/
WEBMAIL_TARGET = _blank
PMA_PATH = ../tools/pma/
PMA_TARGET = _blank
FILEMANAGER_PATH = ../tools/filemanager/
FILEMANAGER_TARGET = _blank
DATE_FORMAT = d.m.Y
#
# htaccess management (21.04.2005).
#
HTACCESS_USERS_FILE_NAME = .htpasswd
HTACCESS_GROUPS_FILE_NAME = .htgroup
HTPASSWD_CMD = /usr/bin/htpasswd2
#
# backup management (16.05.2005).
#
BACKUP_FILE_DIR = /var/www/vhcs2/backups
konsole sagt bei restart von apache
Server:~# /etc/init.d/apache2 restart
Forcing reload of web server: Apache2[Tue Dec 05 14:30:03 2006] [warn] The Alias directive in /etc/apache2/sites-available/vhcs2.conf at line 61 will probably never match because it overlaps an earlier Alias.
[Tue Dec 05 14:30:03 2006] [warn] The Alias directive in /etc/apache2/sites-available/vhcs2.conf at line 74 will probably never match because it overlaps an earlier Alias.
[Tue Dec 05 14:30:03 2006] [warn] The Alias directive in /etc/apache2/sites-available/vhcs2.conf at line 110 will probably never match because it overlaps an earlier Alias.
[Tue Dec 05 14:30:03 2006] [warn] The Alias directive in /etc/apache2/sites-available/vhcs2.conf at line 123 will probably never match because it overlaps an earlier Alias.
[Tue Dec 05 14:30:04 2006] [warn] The Alias directive in /etc/apache2/sites-enabled/vhcs2.conf at line 13 will probably never match because it overlaps an earlier Alias.
[Tue Dec 05 14:30:04 2006] [warn] The Alias directive in /etc/apache2/sites-enabled/vhcs2.conf at line 26 will probably never match because it overlaps an earlier Alias.
[Tue Dec 05 14:30:04 2006] [warn] The Alias directive in /etc/apache2/sites-enabled/vhcs2.conf at line 61 will probably never match because it overlaps an earlier Alias.
[Tue Dec 05 14:30:04 2006] [warn] The Alias directive in /etc/apache2/sites-enabled/vhcs2.conf at line 74 will probably never match because it overlaps an earlier Alias.
[Tue Dec 05 14:30:04 2006] [warn] The Alias directive in /etc/apache2/sites-enabled/vhcs2.conf at line 110 will probably never match because it overlaps an earlier Alias.
[Tue Dec 05 14:30:04 2006] [warn] The Alias directive in /etc/apache2/sites-enabled/vhcs2.conf at line 123 will probably never match because it overlaps an earlier Alias.
[Tue Dec 05 14:30:04 2006] [warn] NameVirtualHost 192.168.0.109:80 has no VirtualHosts
[Tue Dec 05 14:30:04 2006] [warn] NameVirtualHost 192.168.0.109:80 has no VirtualHosts
[Tue Dec 05 14:30:04 2006] [warn] NameVirtualHost 83.171.158.164:80 has no VirtualHosts
[Tue Dec 05 14:30:06 2006] [warn] The Alias directive in /etc/apache2/sites-available/vhcs2.conf at line 61 will probably never match because it overlaps an earlier Alias.
[Tue Dec 05 14:30:06 2006] [warn] The Alias directive in /etc/apache2/sites-available/vhcs2.conf at line 74 will probably never match because it overlaps an earlier Alias.
[Tue Dec 05 14:30:06 2006] [warn] The Alias directive in /etc/apache2/sites-available/vhcs2.conf at line 110 will probably never match because it overlaps an earlier Alias.
[Tue Dec 05 14:30:06 2006] [warn] The Alias directive in /etc/apache2/sites-available/vhcs2.conf at line 123 will probably never match because it overlaps an earlier Alias.
[Tue Dec 05 14:30:06 2006] [warn] The Alias directive in /etc/apache2/sites-enabled/vhcs2.conf at line 13 will probably never match because it overlaps an earlier Alias.
[Tue Dec 05 14:30:06 2006] [warn] The Alias directive in /etc/apache2/sites-enabled/vhcs2.conf at line 26 will probably never match because it overlaps an earlier Alias.
[Tue Dec 05 14:30:06 2006] [warn] The Alias directive in /etc/apache2/sites-enabled/vhcs2.conf at line 61 will probably never match because it overlaps an earlier Alias.
[Tue Dec 05 14:30:06 2006] [warn] The Alias directive in /etc/apache2/sites-enabled/vhcs2.conf at line 74 will probably never match because it overlaps an earlier Alias.
[Tue Dec 05 14:30:06 2006] [warn] The Alias directive in /etc/apache2/sites-enabled/vhcs2.conf at line 110 will probably never match because it overlaps an earlier Alias.
[Tue Dec 05 14:30:06 2006] [warn] The Alias directive in /etc/apache2/sites-enabled/vhcs2.conf at line 123 will probably never match because it overlaps an earlier Alias.
[Tue Dec 05 14:30:06 2006] [warn] NameVirtualHost 192.168.0.109:80 has no VirtualHosts
[Tue Dec 05 14:30:06 2006] [warn] NameVirtualHost 192.168.0.109:80 has no VirtualHosts
[Tue Dec 05 14:30:06 2006] [warn] NameVirtualHost 83.171.158.164:80 has no VirtualHosts
habe probleme !!!
wenn ich in VHCS ein user anlege zb. user1
solde ich mit user1.mega-space.dyndns.org auf diese seite kommen
da wird jedoch immer "seite kann ned angezeit werden" angezeigt
und ich komm nicht dahinder woran es liegt
ich habe debian sarge und VHCS Vers. "vhcs2-2.4.7.1"
könnte mir einer von euch vieleicht helfen
ich poste auch mal die config von apache 2 server und die config von der vhcs
apache2.conf
# Based upon the NCSA server configuration files originally by Rob McCool.
# Changed extensively for the Debian package by Daniel Stone <daniel@sfarc.net>
# and also by Thom May <thom@debian.org>.
# ServerRoot: The top of the directory tree under which the server's
# configuration, error, and log files are kept.
#
# NOTE! If you intend to place this on an NFS (or otherwise network)
# mounted filesystem then please read the LockFile documentation
# (available at <URL:http://www.apache.org/docs/mod/core.html#lockfile>);
# you will save yourself a lot of trouble.
ServerRoot "/etc/apache2"
# The LockFile directive sets the path to the lockfile used when Apache
# is compiled with either USE_FCNTL_SERIALIZED_ACCEPT or
# USE_FLOCK_SERIALIZED_ACCEPT. This directive should normally be left at
# its default value. The main reason for changing it is if the logs
# directory is NFS mounted, since the lockfile MUST BE STORED ON A LOCAL
# DISK. The PID of the main server process is automatically appended to
# the filename.
LockFile /var/lock/apache2/accept.lock
# PidFile: The file in which the server should record its process
# identification number when it starts.
PidFile /var/run/apache2.pid
# Timeout: The number of seconds before receives and sends time out.
TimeOut 300
# KeepAlive: Whether or not to allow persistent connections (more than
# one request per connection). Set to "Off" to deactivate.
KeepAlive on
# MaxKeepAliveRequests: The maximum number of requests to allow
# during a persistent connection. Set to 0 to allow an unlimited amount.
# We recommend you leave this number high, for maximum performance.
MaxKeepAliveRequests 100
# KeepAliveTimeout: Number of seconds to wait for the next request from the
# same client on the same connection.
KeepAliveTimeout 15
##
## Server-Pool Size Regulation (MPM specific)
##
# prefork MPM
# StartServers ......... number of server processes to start
# MinSpareServers ...... minimum number of server processes which are kept spare
# MaxSpareServers ...... maximum number of server processes which are kept spare
# MaxClients ........... maximum number of server processes allowed to start
# MaxRequestsPerChild .. maximum number of requests a server process serves
<IfModule prefork.c>
StartServers 5
MinSpareServers 5
MaxSpareServers 10
MaxClients 20
MaxRequestsPerChild 0
</IfModule>
# pthread MPM
# StartServers ......... initial number of server processes to start
# MaxClients ........... maximum number of server processes allowed to start
# MinSpareThreads ...... minimum number of worker threads which are kept spare
# MaxSpareThreads ...... maximum number of worker threads which are kept spare
# ThreadsPerChild ...... constant number of worker threads in each server process
# MaxRequestsPerChild .. maximum number of requests a server process serves
<IfModule worker.c>
StartServers 2
MaxClients 150
MinSpareThreads 25
MaxSpareThreads 75
ThreadsPerChild 25
MaxRequestsPerChild 0
</IfModule>
# perchild MPM
# NumServers ........... constant number of server processes
# StartThreads ......... initial number of worker threads in each server process
# MinSpareThreads ...... minimum number of worker threads which are kept spare
# MaxSpareThreads ...... maximum number of worker threads which are kept spare
# MaxThreadsPerChild ... maximum number of worker threads in each server process
# MaxRequestsPerChild .. maximum number of connections per server process (then it dies)
<IfModule perchild.c>
NumServers 5
StartThreads 5
MinSpareThreads 5
MaxSpareThreads 10
MaxThreadsPerChild 20
MaxRequestsPerChild 0
AcceptMutex fcntl
</IfModule>
User www-data
Group www-data
# The following directives define some format nicknames for use with
# a CustomLog directive (see below).
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
LogFormat "%h %l %u %t \"%r\" %>s %b" common
LogFormat "%{Referer}i -> %U" referer
LogFormat "%{User-agent}i" agent
# Global error log.
ErrorLog /var/log/apache2/error.log
# Include module configuration:
Include /etc/apache2/mods-enabled/*.load
Include /etc/apache2/mods-enabled/*.conf
# Include all the user configurations:
Include /etc/apache2/httpd.conf
# Include ports listing
Include /etc/apache2/ports.conf
# Include generic snippets of statements
Include /etc/apache2/conf.d/[^.#]*
#Let's have some Icons, shall we?
Alias /icons/ "/usr/share/apache2/icons/"
<Directory "/usr/share/apache2/icons">
Options Indexes MultiViews
AllowOverride all
Order allow,deny
Allow from all
</Directory>
# Set up the default error docs.
#
# Customizable error responses come in three flavors:
# 1) plain text 2) local redirects 3) external redirects
#
# Some examples:
#ErrorDocument 500 "The server made a boo boo."
#ErrorDocument 404 /missing.html
#ErrorDocument 404 "/cgi-bin/missing_handler.pl"
#ErrorDocument 402 http://www.example.com/subscription_info.html
#
#
# Putting this all together, we can Internationalize error responses.
#
# We use Alias to redirect any /error/HTTP_<error>.html.var response to
# our collection of by-error message multi-language collections. We use
# includes to substitute the appropriate text.
#
# You can modify the messages' appearance without changing any of the
# default HTTP_<error>.html.var files by adding the line;
#
# Alias /error/include/ "/your/include/path/"
#
# which allows you to create your own set of files by starting with the
# /usr/local/apache2/error/include/ files and
# copying them to /your/include/path/, even on a per-VirtualHost basis.
#
<IfModule mod_negotiation.c>
<IfModule mod_include.c>
Alias /error/ "/usr/share/apache2/error/"
<Directory "/usr/share/apache2/error">
AllowOverride all
Options IncludesNoExec
AddOutputFilter Includes html
AddHandler type-map var
Order allow,deny
Allow from all
LanguagePriority en es de fr
ForceLanguagePriority Prefer Fallback
</Directory>
ErrorDocument 400 /error/HTTP_BAD_REQUEST.html.var
ErrorDocument 401 /error/HTTP_UNAUTHORIZED.html.var
ErrorDocument 403 /error/HTTP_FORBIDDEN.html.var
ErrorDocument 404 /error/HTTP_NOT_FOUND.html.var
ErrorDocument 405 /error/HTTP_METHOD_NOT_ALLOWED.html.var
ErrorDocument 408 /error/HTTP_REQUEST_TIME_OUT.html.var
ErrorDocument 410 /error/HTTP_GONE.html.var
ErrorDocument 411 /error/HTTP_LENGTH_REQUIRED.html.var
ErrorDocument 412 /error/HTTP_PRECONDITION_FAILED.html.var
ErrorDocument 413 /error/HTTP_REQUEST_ENTITY_TOO_LARGE.html.var
ErrorDocument 414 /error/HTTP_REQUEST_URI_TOO_LARGE.html.var
ErrorDocument 415 /error/HTTP_SERVICE_UNAVAILABLE.html.var
ErrorDocument 500 /error/HTTP_INTERNAL_SERVER_ERROR.html.var
ErrorDocument 501 /error/HTTP_NOT_IMPLEMENTED.html.var
ErrorDocument 502 /error/HTTP_BAD_GATEWAY.html.var
ErrorDocument 503 /error/HTTP_SERVICE_UNAVAILABLE.html.var
ErrorDocument 506 /error/HTTP_VARIANT_ALSO_VARIES.html.var
</IfModule>
</IfModule>
DirectoryIndex index.html index.cgi index.pl index.php index.xhtml
# UserDir is now a module
#UserDir public_html
#UserDir disabled root
#<Directory /home/*/public_html>
# AllowOverride FileInfo AuthConfig Limit
# Options Indexes SymLinksIfOwnerMatch IncludesNoExec
#</Directory>
AccessFileName .htaccess
<Files ~ "^\.ht">
Order allow,deny
Deny from all
</Files>
UseCanonicalName off
TypesConfig /etc/mime.types
DefaultType text/plain
HostNameLookups off
IndexOptions FancyIndexing VersionSort
AddIconByEncoding (CMP,/icons/compressed.gif) x-compress x-gzip
AddIconByType (TXT,/icons/text.gif) text/*
AddIconByType (IMG,/icons/image2.gif) image/*
AddIconByType (SND,/icons/sound2.gif) audio/*
AddIconByType (VID,/icons/movie.gif) video/*
# This really should be .jpg.
AddIcon /icons/binary.gif .bin .exe
AddIcon /icons/binhex.gif .hqx
AddIcon /icons/tar.gif .tar
AddIcon /icons/world2.gif .wrl .wrl.gz .vrml .vrm .iv
AddIcon /icons/compressed.gif .Z .z .tgz .gz .zip
AddIcon /icons/a.gif .ps .ai .eps
AddIcon /icons/layout.gif .html .shtml .htm .pdf
AddIcon /icons/text.gif .txt
AddIcon /icons/c.gif .c
AddIcon /icons/p.gif .pl .py
AddIcon /icons/f.gif .for
AddIcon /icons/dvi.gif .dvi
AddIcon /icons/uuencoded.gif .uu
AddIcon /icons/script.gif .conf .sh .shar .csh .ksh .tcl
AddIcon /icons/tex.gif .tex
AddIcon /icons/bomb.gif core
AddIcon /icons/back.gif ..
AddIcon /icons/hand.right.gif README
AddIcon /icons/folder.gif ^^DIRECTORY^^
AddIcon /icons/blank.gif ^^BLANKICON^^
# This is from Matty J's patch. Anyone want to make the icons?
#AddIcon /icons/dirsymlink.jpg ^^SYMDIR^^
#AddIcon /icons/symlink.jpg ^^SYMLINK^^
DefaultIcon /icons/unknown.gif
ReadmeName README.html
HeaderName HEADER.html
IndexIgnore .??* *~ *# HEADER* RCS CVS *,t
AddEncoding x-compress Z
AddEncoding x-gzip gz tgz
AddLanguage da .dk
AddLanguage nl .nl
AddLanguage en .en
AddLanguage et .et
AddLanguage fr .fr
AddLanguage de .de
AddLanguage el .el
AddLanguage it .it
AddLanguage ja .ja
AddLanguage pl .po
AddLanguage ko .ko
AddLanguage pt .pt
AddLanguage no .no
AddLanguage pt-br .pt-br
AddLanguage ltz .ltz
AddLanguage ca .ca
AddLanguage es .es
AddLanguage sv .se
AddLanguage cz .cz
AddLanguage ru .ru
AddLanguage tw .tw
AddLanguage zh-tw .tw
LanguagePriority en da nl et fr de el it ja ko no pl pt pt-br ltz ca es sv tw
#AddDefaultCharset ISO-8859-1
AddCharset ISO-8859-1 .iso8859-1 .latin1
AddCharset ISO-8859-2 .iso8859-2 .latin2 .cen
AddCharset ISO-8859-3 .iso8859-3 .latin3
AddCharset ISO-8859-4 .iso8859-4 .latin4
AddCharset ISO-8859-5 .iso8859-5 .latin5 .cyr .iso-ru
AddCharset ISO-8859-6 .iso8859-6 .latin6 .arb
AddCharset ISO-8859-7 .iso8859-7 .latin7 .grk
AddCharset ISO-8859-8 .iso8859-8 .latin8 .heb
AddCharset ISO-8859-9 .iso8859-9 .latin9 .trk
AddCharset ISO-2022-JP .iso2022-jp .jis
AddCharset ISO-2022-KR .iso2022-kr .kis
AddCharset ISO-2022-CN .iso2022-cn .cis
AddCharset Big5 .Big5 .big5
# For russian, more than one charset is used (depends on client, mostly):
AddCharset WINDOWS-1251 .cp-1251 .win-1251
AddCharset CP866 .cp866
AddCharset KOI8-r .koi8-r .koi8-ru
AddCharset KOI8-ru .koi8-uk .ua
AddCharset ISO-10646-UCS-2 .ucs2
AddCharset ISO-10646-UCS-4 .ucs4
AddCharset UTF-8 .utf8
AddCharset GB2312 .gb2312 .gb
AddCharset utf-7 .utf7
AddCharset utf-8 .utf8
AddCharset big5 .big5 .b5
AddCharset EUC-TW .euc-tw
AddCharset EUC-JP .euc-jp
AddCharset EUC-KR .euc-kr
AddCharset shift_jis .sjis
#AddType application/x-httpd-php .php
#AddType application/x-httpd-php-source .phps
AddType application/x-tar .tgz
# To use CGI scripts outside /cgi-bin/:
#
#AddHandler cgi-script .cgi
# To use server-parsed HTML files
#
<FilesMatch "\.shtml(\..+)?$">
SetOutputFilter INCLUDES
</FilesMatch>
# If you wish to use server-parsed imagemap files, use
#
#AddHandler imap-file map
BrowserMatch "Mozilla/2" nokeepalive
BrowserMatch "MSIE 4\.0b2;" nokeepalive downgrade-1.0 force-response-1.0
BrowserMatch "RealPlayer 4\.0" force-response-1.0
BrowserMatch "Java/1\.0" force-response-1.0
BrowserMatch "JDK/1\.0" force-response-1.0
#
# The following directive disables redirects on non-GET requests for
# a directory that does not include the trailing slash. This fixes a
# problem with Microsoft WebFolders which does not appropriately handle
# redirects for folders with DAV methods.
#
BrowserMatch "Microsoft Data Access Internet Publishing Provider" redirect-carefully
BrowserMatch "^WebDrive" redirect-carefully
BrowserMatch "^gnome-vfs" redirect-carefully
BrowserMatch "^WebDAVFS/1.[012]" redirect-carefully
# Allow server status reports, with the URL of http://servername/server-status
# Change the ".your_domain.com" to match your domain to enable.
#
#<Location /server-status>
# SetHandler server-status
# Order deny,allow
# Deny from all
# Allow from .your_domain.com
#</Location>
# Allow remote server configuration reports, with the URL of
# http://servername/server-info (requires that mod_info.c be loaded).
# Change the ".your_domain.com" to match your domain to enable.
#
#<Location /server-info>
# SetHandler server-info
# Order deny,allow
# Deny from all
# Allow from .your_domain.com
#</Location>
# Include the virtual host configurations:
Include /etc/apache2/sites-enabled/[^.#]*
ServerName mega-space.dyndns.org
nun die hddpd.conf
# This is here for backwards compatability reasons and to support
# installing 3rd party modules directly via apxs2, rather than
# through the /etc/apache2/mods-{available,enabled} mechanism.
#
#LoadModule mod_placeholder /usr/lib/apache2/modules/mod_placeholder.so
Include /etc/apache2/sites-available/vhcs2.conf
nun die vhcs2.conf
#
# Misc config variables;
#
BuildDate = 03.01.2006
# DFtpDir = /var/www/virtual/
# FtpShell = /bin/bash
Version = 2.4.7.1
VersionH = 2.4 Spartacus
LOGIN_TIME_OUT = 20
DEFAULT_ADMIN_ADDRES =
SERVER_HOSTNAME = hier meine domain
BASE_SERVER_IP = xx.xxx.xxx.xxx
MR_LOCK_FILE = /tmp/vhcs2.lock
CMD_HOSTNAME = /bin/hostname
CMD_IFCONFIG = /sbin/ifconfig
CMD_USERADD = /usr/sbin/useradd
CMD_USERDEL = /usr/sbin/userdel
CMD_GROUPADD = /usr/sbin/groupadd
CMD_GROUPDEL = /usr/sbin/groupdel
CMD_MYSQL = /usr/bin/mysql
FTPD_CONF_FILE = /etc/proftpd.conf
CMD_CHOWN = /bin/chown
#
# SQL backend variables;
#
DATABASE_TYPE = mysql
DATABASE_HOST = localhost
DATABASE_NAME = vhcs2
DATABASE_PASSWORD = heir mein datenbank pw
DATABASE_USER = hier der db_user
DATABASE_DIR = /var/lib/mysql
#
# Main situation variables;
#
ROOT_DIR = /var/www/vhcs2
CONF_DIR = /etc/vhcs2
LOG_DIR = /var/log/vhcs2
#
# BIND data.
#
BIND_CONF_FILE = /etc/bind/named.conf
BIND_DB_DIR = /var/cache/bind
SECONDARY_DNS = 212.114.153.1
#
# APACHE data.
#
#
# APACHE config data.
#
APACHE_CMD = /usr/sbin/apache2
APACHE_NAME = apache2
APACHE_RESTART_TRY = 3
APACHE_WWW_DIR = /var/www/virtual
APACHE_LOG_DIR = /var/log/apache2
APACHE_USERS_LOG_DIR = /var/log/apache2/users
APACHE_BACKUP_LOG_DIR = /var/log/apache2/backup
APACHE_CONF_FILE = /etc/apache2/sites-available/vhcs2.conf
GUI_ROOT_DIR = /var/www/vhcs2/gui
PEAR_DIR = /usr/share/php
CMD_PS = /bin/ps
CMD_WC = /usr/bin/wc
APACHE_SUEXEC_MIN_UID = 2000
APACHE_SUEXEC_MIN_GID = 2000
APACHE_SUEXEC_USER_PREF = vu
#
# APACHE directory data.
#
APACHE_USER = www-data
APACHE_GROUP = www-data
#
# Postfix MTA Data.
#
POSTFIX_CONF_FILE = /etc/postfix/main.cf
POSTFIX_MASTER_CONF_FILE = /etc/postfix/master.cf
MTA_LOCAL_MAIL_DIR = /var/mail
MTA_VIRTUAL_MAIL_DIR = /var/mail/virtual
MTA_LOCAL_ALIAS_HASH = /etc/aliases
MTA_VIRTUAL_CONF_DIR = /etc/postfix/vhcs2
MTA_VIRTUAL_ALIAS_HASH = /etc/postfix/vhcs2/aliases
MTA_VIRTUAL_DMN_HASH = /etc/postfix/vhcs2/domains
MTA_VIRTUAL_MAILBOX_HASH = /etc/postfix/vhcs2/mailboxes
MTA_TRANSPORT_HASH = /etc/postfix/vhcs2/transport
MTA_SENDER_ACCESS_HASH = /etc/postfix/vhcs2/sender-access
MTA_MAILBOX_MIN_UID = 1010
MTA_MAILBOX_UID = 1010
MTA_MAILBOX_UID_NAME = vmail
MTA_MAILBOX_GID = 8
MTA_MAILBOX_GID_NAME = mail
MTA_SASLDB_LOCAL_DOMAIN = vhcs.net
MTA_SASLDB_FILE = /var/spool/postfix/etc/sasldb2
ETC_SASLDB_FILE = /etc/sasldb2
CMD_SASLDB_LISTUSERS2 = /usr/sbin/sasldblistusers2
CMD_SASLDB_PASSWD2 = /usr/sbin/saslpasswd2
CMD_POSTMAP = /usr/sbin/postmap
CMD_NEWALIASES = /usr/bin/newaliases
CMD_ECHO = /bin/echo
CMD_LN = /bin/ln
#
# Courier IMAP/POP3 Data.
#
COURIER_CONF_DIR = /etc/courier
AUTHLIB_CONF_DIR = /etc/courier
CMD_MAKEUSERDB = /usr/sbin/makeuserdb
#
# Crontab delayed tasks.
#
BACKUP_HOUR = 23
BACKUP_MINUTE = 40
BACKUP_ROOT_DIR = /var/www/vhcs2/engine/backup
CMD_CRONTAB = /usr/bin/crontab
#
# Backup tasks manager.
#
CMD_TAR = /bin/tar
CMD_MV = /bin/mv
CMD_RM = /bin/rm
CMD_DU = /usr/bin/du
#
# Service manager.
#
CMD_NAMED = /etc/init.d/bind9
CMD_MTA = /etc/init.d/postfix
CMD_HTTPD = /usr/sbin/apache2ctl
CMD_AUTHD = /etc/init.d/courier-authdaemon
CMD_IMAP = /etc/init.d/courier-imap
CMD_POP = /etc/init.d/courier-pop
CMD_AMAVIS = no
CMD_FTPD = /etc/init.d/proftpd
CMD_VHCS2D = /etc/init.d/vhcs2_daemon
CMD_VHCS2N = /etc/init.d/vhcs2_network
#
# Server traffic manager.
#
CMD_IPTABLES = /sbin/iptables
#
# Virtual traffic manager.
#
CMD_CP = /bin/cp
CMD_DIFF = /usr/bin/diff
CMD_GREP = /bin/grep
CMD_CAT = /bin/cat
CMD_AWK = /usr/bin/awk
CMD_PFLOGSUMM = /usr/sbin/maillogconvert.pl
TRAFF_LOG_DIR = /var/log
FTP_TRAFF_LOG = ftp_traff.log
MAIL_TRAFF_LOG = mail.log
MAIL_LOG_INC_AMAVIS = 0
PREV_TRAFF_LOG_MAX_SIZE = 10485760
QUOTA_ROOT_DIR = /var/www/vhcs2/engine/quota
TRAFF_ROOT_DIR = /var/www/vhcs2/engine/traffic
TOOLS_ROOT_DIR = /var/www/vhcs2/engine/tools
#
USER_INITIAL_LANG = lang_English
USER_INITIAL_THEME = modern_blue
USER_INITIAL_THEME_COLOR = blue
USER_LAYOUT_ID = 1
VHCS_LICENSE = VHCS<sup>®</sup> Pro v2.4.7.1<br>build: 2006-01-03<br>Spartacus
MINIMAL_FTP_UID = 2000
MINIMAL_FTP_GID = 2000
FTP_USERNAME_SEPARATOR = @
FTP_HOMEDIR = /var/www/virtual
FTP_SHELL = /bin/bash
IPS_LOGO_PATH = ../themes/user_logos
VHCS_SUPPORT_SYSTEM = yes
VHCS_SUPPORT_SYSTEM_PATH = support_system.php
VHCS_SUPPORT_SYSTEM_TARGET =
MYSQL_PREFIX = yes
MYSQL_PREFIX_TYPE =
WEBMAIL_PATH = ../tools/webmail/
WEBMAIL_TARGET = _blank
PMA_PATH = ../tools/pma/
PMA_TARGET = _blank
FILEMANAGER_PATH = ../tools/filemanager/
FILEMANAGER_TARGET = _blank
DATE_FORMAT = d.m.Y
#
# htaccess management (21.04.2005).
#
HTACCESS_USERS_FILE_NAME = .htpasswd
HTACCESS_GROUPS_FILE_NAME = .htgroup
HTPASSWD_CMD = /usr/bin/htpasswd2
#
# backup management (16.05.2005).
#
BACKUP_FILE_DIR = /var/www/vhcs2/backups
konsole sagt bei restart von apache
Server:~# /etc/init.d/apache2 restart
Forcing reload of web server: Apache2[Tue Dec 05 14:30:03 2006] [warn] The Alias directive in /etc/apache2/sites-available/vhcs2.conf at line 61 will probably never match because it overlaps an earlier Alias.
[Tue Dec 05 14:30:03 2006] [warn] The Alias directive in /etc/apache2/sites-available/vhcs2.conf at line 74 will probably never match because it overlaps an earlier Alias.
[Tue Dec 05 14:30:03 2006] [warn] The Alias directive in /etc/apache2/sites-available/vhcs2.conf at line 110 will probably never match because it overlaps an earlier Alias.
[Tue Dec 05 14:30:03 2006] [warn] The Alias directive in /etc/apache2/sites-available/vhcs2.conf at line 123 will probably never match because it overlaps an earlier Alias.
[Tue Dec 05 14:30:04 2006] [warn] The Alias directive in /etc/apache2/sites-enabled/vhcs2.conf at line 13 will probably never match because it overlaps an earlier Alias.
[Tue Dec 05 14:30:04 2006] [warn] The Alias directive in /etc/apache2/sites-enabled/vhcs2.conf at line 26 will probably never match because it overlaps an earlier Alias.
[Tue Dec 05 14:30:04 2006] [warn] The Alias directive in /etc/apache2/sites-enabled/vhcs2.conf at line 61 will probably never match because it overlaps an earlier Alias.
[Tue Dec 05 14:30:04 2006] [warn] The Alias directive in /etc/apache2/sites-enabled/vhcs2.conf at line 74 will probably never match because it overlaps an earlier Alias.
[Tue Dec 05 14:30:04 2006] [warn] The Alias directive in /etc/apache2/sites-enabled/vhcs2.conf at line 110 will probably never match because it overlaps an earlier Alias.
[Tue Dec 05 14:30:04 2006] [warn] The Alias directive in /etc/apache2/sites-enabled/vhcs2.conf at line 123 will probably never match because it overlaps an earlier Alias.
[Tue Dec 05 14:30:04 2006] [warn] NameVirtualHost 192.168.0.109:80 has no VirtualHosts
[Tue Dec 05 14:30:04 2006] [warn] NameVirtualHost 192.168.0.109:80 has no VirtualHosts
[Tue Dec 05 14:30:04 2006] [warn] NameVirtualHost 83.171.158.164:80 has no VirtualHosts
[Tue Dec 05 14:30:06 2006] [warn] The Alias directive in /etc/apache2/sites-available/vhcs2.conf at line 61 will probably never match because it overlaps an earlier Alias.
[Tue Dec 05 14:30:06 2006] [warn] The Alias directive in /etc/apache2/sites-available/vhcs2.conf at line 74 will probably never match because it overlaps an earlier Alias.
[Tue Dec 05 14:30:06 2006] [warn] The Alias directive in /etc/apache2/sites-available/vhcs2.conf at line 110 will probably never match because it overlaps an earlier Alias.
[Tue Dec 05 14:30:06 2006] [warn] The Alias directive in /etc/apache2/sites-available/vhcs2.conf at line 123 will probably never match because it overlaps an earlier Alias.
[Tue Dec 05 14:30:06 2006] [warn] The Alias directive in /etc/apache2/sites-enabled/vhcs2.conf at line 13 will probably never match because it overlaps an earlier Alias.
[Tue Dec 05 14:30:06 2006] [warn] The Alias directive in /etc/apache2/sites-enabled/vhcs2.conf at line 26 will probably never match because it overlaps an earlier Alias.
[Tue Dec 05 14:30:06 2006] [warn] The Alias directive in /etc/apache2/sites-enabled/vhcs2.conf at line 61 will probably never match because it overlaps an earlier Alias.
[Tue Dec 05 14:30:06 2006] [warn] The Alias directive in /etc/apache2/sites-enabled/vhcs2.conf at line 74 will probably never match because it overlaps an earlier Alias.
[Tue Dec 05 14:30:06 2006] [warn] The Alias directive in /etc/apache2/sites-enabled/vhcs2.conf at line 110 will probably never match because it overlaps an earlier Alias.
[Tue Dec 05 14:30:06 2006] [warn] The Alias directive in /etc/apache2/sites-enabled/vhcs2.conf at line 123 will probably never match because it overlaps an earlier Alias.
[Tue Dec 05 14:30:06 2006] [warn] NameVirtualHost 192.168.0.109:80 has no VirtualHosts
[Tue Dec 05 14:30:06 2006] [warn] NameVirtualHost 192.168.0.109:80 has no VirtualHosts
[Tue Dec 05 14:30:06 2006] [warn] NameVirtualHost 83.171.158.164:80 has no VirtualHosts