pita
30.11.06, 19:51
hi!
irgendwie geht ein zweites sound-device nicht richtig:
hier ein paar infos:
crw-rw---- 1 root audio 14, 12 2006-11-30 17:28 adsp
crw-rw---- 1 root audio 14, 3 2006-11-30 17:28 dsp
lspci | grep audio
00:0b.0 Multimedia audio controller: C-Media Electronics Inc CM8738 (rev 10)
niveauzero:/home/pita# lsmod | grep snd
snd_cmipci 30496 1
snd_pcm_oss 46112 0
snd_mixer_oss 16576 2 snd_pcm_oss
snd_pcm 77704 2 snd_cmipci,snd_pcm_oss
snd_page_alloc 9992 1 snd_pcm
snd_opl3_lib 9600 1 snd_cmipci
snd_timer 21444 2 snd_pcm,snd_opl3_lib
snd_hwdep 8480 1 snd_opl3_lib
snd_mpu401_uart 6656 1 snd_cmipci
snd_rawmidi 22688 1 snd_mpu401_uart
snd_seq_device 8012 2 snd_opl3_lib,snd_rawmidi
snd 48740 10 snd_cmipci,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_o pl3_lib,snd_timer,snd_hwdep,snd_mpu401_uart,snd_ra wmidi,snd_seq_device
soundcore 8992 2 snd
gameport 14024 4 snd_cmipci,ns558,analog
cat /proc/asound/cards
0 [CMI8738MC6 ]: CMI8738-MC6 - C-Media PCI CMI8738-MC6
C-Media PCI CMI8738-MC6 (model 55) at 0xd800, irq 193
cat /proc/asound/devices
18: [0- 2]: digital audio playback
26: [0- 2]: digital audio capture
17: [0- 1]: digital audio playback
16: [0- 0]: digital audio playback
24: [0- 0]: digital audio capture
4: [0- 0]: hardware dependent
0: [0- 0]: ctl
wenn ich jetzt
cat /dev/urandom > /dev/dsp bzw /dev/adsp
eingebe, bekomme ich bei dsp ein rauschen und bei adsp nicht.
irgendwie habe ich den eindruck, dass mein zweites sound-device nicht erkannt wird.
wenn ich jetzt das zweite sound-device mit mknod (mit mayor und minor-nummer gemäß meiner devices.txt) erstelle
crw-rw---- 1 root audio 14, 19 2006-11-30 19:48 dsp1
bekomme ich mit urandom sogar die dreiste aussage, dass device dsp1 nicht vorhanden ist!
hat jmd eine ahnung, wie das zweite device zum laufen bekomme?
greetz
pita
irgendwie geht ein zweites sound-device nicht richtig:
hier ein paar infos:
crw-rw---- 1 root audio 14, 12 2006-11-30 17:28 adsp
crw-rw---- 1 root audio 14, 3 2006-11-30 17:28 dsp
lspci | grep audio
00:0b.0 Multimedia audio controller: C-Media Electronics Inc CM8738 (rev 10)
niveauzero:/home/pita# lsmod | grep snd
snd_cmipci 30496 1
snd_pcm_oss 46112 0
snd_mixer_oss 16576 2 snd_pcm_oss
snd_pcm 77704 2 snd_cmipci,snd_pcm_oss
snd_page_alloc 9992 1 snd_pcm
snd_opl3_lib 9600 1 snd_cmipci
snd_timer 21444 2 snd_pcm,snd_opl3_lib
snd_hwdep 8480 1 snd_opl3_lib
snd_mpu401_uart 6656 1 snd_cmipci
snd_rawmidi 22688 1 snd_mpu401_uart
snd_seq_device 8012 2 snd_opl3_lib,snd_rawmidi
snd 48740 10 snd_cmipci,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_o pl3_lib,snd_timer,snd_hwdep,snd_mpu401_uart,snd_ra wmidi,snd_seq_device
soundcore 8992 2 snd
gameport 14024 4 snd_cmipci,ns558,analog
cat /proc/asound/cards
0 [CMI8738MC6 ]: CMI8738-MC6 - C-Media PCI CMI8738-MC6
C-Media PCI CMI8738-MC6 (model 55) at 0xd800, irq 193
cat /proc/asound/devices
18: [0- 2]: digital audio playback
26: [0- 2]: digital audio capture
17: [0- 1]: digital audio playback
16: [0- 0]: digital audio playback
24: [0- 0]: digital audio capture
4: [0- 0]: hardware dependent
0: [0- 0]: ctl
wenn ich jetzt
cat /dev/urandom > /dev/dsp bzw /dev/adsp
eingebe, bekomme ich bei dsp ein rauschen und bei adsp nicht.
irgendwie habe ich den eindruck, dass mein zweites sound-device nicht erkannt wird.
wenn ich jetzt das zweite sound-device mit mknod (mit mayor und minor-nummer gemäß meiner devices.txt) erstelle
crw-rw---- 1 root audio 14, 19 2006-11-30 19:48 dsp1
bekomme ich mit urandom sogar die dreiste aussage, dass device dsp1 nicht vorhanden ist!
hat jmd eine ahnung, wie das zweite device zum laufen bekomme?
greetz
pita