iPAQ HP H5500 - synce-serial-start

[p2k]

Hallo,
ich habe einen Pocket PC von HP (H5500) welchen ich mit SuSE 10.1 über USB synchronisieren möchte.

Ich habe dem iPAQ erfolgreich mit

synce-serial-config /dev/ttyUSB0 192.168.178.201:192.168.178.200
eine IP zugewiessen, welche ich auch pingen kann.

Bei der Ausführung von
synce-serial-start meldet der iPAQ "Verbindungsaufbau", in der konsole sehe ich aber sonst keine Ausgaben mehr von synce-serial-start oder dem iPAQ.
Die SuSE-Firewall hat ppp0 erst als externe, aktuell als interne Schnittstelle konfiguriert.
Temporär wurde die FW deaktiviert.

Ich bekomme nur folgende Ausgabe wenn ich die Anwendung mittels strg+c abbreche.


Connect script failed
synce-serial-start was unable to start the PPP daemon



strace liefert die aussage das synce auf "etwas" wartet.
Dort bleibt es dann auch nach Minuten stehen.


rt_sigreturn(0x8) = 0
rt_sigprocmask(SIG_BLOCK, [CHLD], [], 8) = 0
rt_sigprocmask(SIG_SETMASK, [], NULL, 8) = 0
rt_sigprocmask(SIG_BLOCK, [CHLD], [], 8) = 0
rt_sigaction(SIGINT, {0x42ea17, [], SA_RESTORER, 0x2b98d23b9b20}, {SIG_DFL}, 8) = 0
rt_sigprocmask(SIG_SETMASK, [], NULL, 8) = 0
rt_sigaction(SIGINT, {SIG_DFL}, {0x42ea17, [], SA_RESTORER, 0x2b98d23b9b20}, 8) = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8) = 0
read(255, "\n#\n# Finally start pppd\n#\n\n${INF"..., 2893) = 264
rt_sigprocmask(SIG_BLOCK, NULL, [], 8) = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8) = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8) = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8) = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8) = 0
stat(".", {st_mode=S_IFDIR|0755, st_size=4096, ...}) = 0
stat("/sbin/logger", 0x7fffd8ce6360) = -1 ENOENT (No such file or directory)
stat("/usr/sbin/logger", 0x7fffd8ce6360) = -1 ENOENT (No such file or directory)
stat("/home/guenter/bin/logger", 0x7fffd8ce6360) = -1 ENOENT (No such file or directory)
stat("/usr/local/bin/logger", 0x7fffd8ce6360) = -1 ENOENT (No such file or directory)
stat("/usr/bin/logger", 0x7fffd8ce6360) = -1 ENOENT (No such file or directory)
stat("/sbin/logger", 0x7fffd8ce6360) = -1 ENOENT (No such file or directory)
stat("/usr/X11R6/bin/logger", 0x7fffd8ce6360) = -1 ENOENT (No such file or directory)
stat("/usr/sbin/logger", 0x7fffd8ce6360) = -1 ENOENT (No such file or directory)
stat("/bin/logger", {st_mode=S_IFREG|0755, st_size=11888, ...}) = 0
stat("/bin/logger", {st_mode=S_IFREG|0755, st_size=11888, ...}) = 0
rt_sigprocmask(SIG_BLOCK, [INT CHLD], [], 8) = 0
lseek(255, -204, SEEK_CUR) = 2689
clone(child_stack=0, flags=CLONE_CHILD_CLEARTID|CLONE_CHILD_SETTID|SIGC HLD, child_tidptr=0x2b98d25bab70) = 11679
rt_sigprocmask(SIG_SETMASK, [], NULL, 8) = 0
--- SIGCHLD (Child exited) @ 0 (0) ---
wait4(-1, [{WIFEXITED(s) && WEXITSTATUS(s) == 0}], WNOHANG, NULL) = 11679
wait4(-1, 0x7fffd8ce60c4, WNOHANG, NULL) = -1 ECHILD (No child processes)
rt_sigreturn(0x8) = 0
rt_sigprocmask(SIG_BLOCK, [CHLD], [], 8) = 0
rt_sigprocmask(SIG_SETMASK, [], NULL, 8) = 0
rt_sigprocmask(SIG_BLOCK, [CHLD], [], 8) = 0
rt_sigaction(SIGINT, {0x42ea17, [], SA_RESTORER, 0x2b98d23b9b20}, {SIG_DFL}, 8) = 0
rt_sigprocmask(SIG_SETMASK, [], NULL, 8) = 0
rt_sigaction(SIGINT, {SIG_DFL}, {0x42ea17, [], SA_RESTORER, 0x2b98d23b9b20}, 8) = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8) = 0
read(255, "\nif ${COMMAND}; then\n\techo \"\n${T"..., 2893) = 204
rt_sigprocmask(SIG_BLOCK, NULL, [], 8) = 0
rt_sigprocmask(SIG_BLOCK, [INT CHLD], [], 8) = 0
lseek(255, -1, SEEK_CUR) = 2892
clone(child_stack=0, flags=CLONE_CHILD_CLEARTID|CLONE_CHILD_SETTID|SIGC HLD, child_tidptr=0x2b98d25bab70) = 11680
rt_sigprocmask(SIG_SETMASK, [], NULL, 8) = 0
rt_sigprocmask(SIG_BLOCK, [CHLD], [], 8) = 0
rt_sigprocmask(SIG_SETMASK, [], NULL, 8) = 0
rt_sigprocmask(SIG_BLOCK, [CHLD], [], 8) = 0
rt_sigaction(SIGINT, {0x42ea17, [], SA_RESTORER, 0x2b98d23b9b20}, {SIG_DFL}, 8) = 0
wait4(-1,


dccm wurde über raki gestartet.

Die Anleitungen unter http://synce.sourceforge.net/synce/ helfen mir leider nicht weiter.

Danke im vorraus für hilfreiche Antworten.

Gruß Conny