TheNose
02.09.06, 16:27
Hallo!
Probiere seit einigen Tagen Courier-MTA einzurichten. Bis jetzt habe ich es aber noch nicht richtig hinbekommen. Die Manpages kann ich mittlerweile fast auswendig und alle un-/brauchbaren Tutorials hab ich schon durchgelesen. An einem Problem komme ich einfach nicht weiter:
Wenn ich an meinen Mailserver eine eMail versende kommt diese immer mit der Fehlermeldung "535 Authentication required" zurück.
Das Problem tritt auf, seit ich SMTP Auth eingerichtet habe. Meine Domain, habe ich in esmtpaccess.dir in einer File names accept eingetragen und auch mit makeacceptmailsfor in eine Datenbank umgewandelt. Die Domain ist außerdem noch bei hosteddomains eingetragen.
##VERSION: $Id: esmtpd.dist.in,v 1.18 2004/05/11 00:48:14 mrsam Exp $
#
#
# esmtpd created from esmtpd.dist by sysconftool
#
# Do not alter lines that begin with ##, they are used when upgrading
# this configuration.
#
# Copyright 1998 - 2004 Double Precision, Inc. See COPYING for
# distribution information.
#
# This configuration file sets various options for Courier's esmtpd server.
# It is started by couriertcpd, Courier's TCP server.
# A lot of the stuff here is documented in the manual page for couriertcpd.
##NAME: PATH:0
#
# Specify the default PATH that everything inherits.
PATH=/usr/bin:/bin:/usr/bin:/usr/local/bin
##NAME: SHELL:0
#
# The default shell
SHELL=/bin/sh
##NAME: ULIMIT:0
#
# Sets the maximum size of courieresmtpd's data segment
#
ULIMIT=4096
##NAME: BOFHCHECKDNS:0
#
# Comment out the following line in order to accept mail with a bad
# return address.
BOFHCHECKDNS=1
##NAME: BOFHNOEXPN:1
#
# Set BOFHNOEXP to 1 to disable EXPN
BOFHNOEXPN=1
##NAME: BOFHNOVRFY:1
#
# Set BOFHNOVERIFY to disable VRFY
BOFHNOVRFY=1
##NAME: NOADDMSGID:0
#
# The following environment variables keep Courier from adding
# default Date: and Message-ID: header to messages which do not have them.
# If you would like to add default headers only for mail from certain
# IP address ranges, you can override them in couriertcpd access file,
# see couriertcpd(8).
NOADDMSGID=1
##NAME: NOADDDATE:0
#
NOADDDATE=1
##NAME: ESMTP_LOG_DIALOG:0
#
# If set, log the esmtp dialog.
ESMTP_LOG_DIALOG=0
##NAME: AUTH_REQUIRED:0
#
# Set AUTH_REQUIRED to 1 in order to force the client to use ESMTP
# authentication. You can override AUTH_REQUIRED on a per-IP address basis
# using smtpaccess. See makesmtpaccess(8).
AUTH_REQUIRED=1
################################################## #######################
#
##NAME: COURIERTLS:0
#
# The following variables configure ESMTP STARTTLS. If OpenSSL is available
# during configuration, the couriertls helper gets compiled, and upon
# installation a dummy TLS_CERTFILE gets generated. courieresmtpd will
# automatically advertise the ESMTP STARTTLS extension if both TLS_CERTFILE
# and COURIERTLS exist.
#
# WARNING: Peer certificate verification has NOT yet been tested. Proceed
# at your own risk. Only the basic SSL/TLS functionality is known to be
# working. Keep this in mind as you play with the following variables.
COURIERTLS=/usr/bin/couriertls
##NAME: ESMTP_TLS_REQUIRED:0
#
# Set ESMTP_TLS_REQUIRED to 1 if you REQUIRE SSL/TLS to be used for receiving
# mail. Setting it here will require it for every connection. You can also
# set ESMTP_TLS_REQUIRED in the smtpaccess file, see makesmtpaccess(8) for
# more information
#
# ESMTP_TLS_REQUIRED=1
##NAME: TLS_PROTOCOL:0
#
#
# TLS_PROTOCOL sets the protocol version. The possible versions are:
#
# SSL2 - SSLv2
# SSL3 - SSLv3
# TLS1 - TLS1
TLS_PROTOCOL=SSL3
##NAME: TLS_CIPHER_LIST:0
#
# TLS_CIPHER_LIST optionally sets the list of ciphers to be used by the
# OpenSSL library. In most situations you can leave TLS_CIPHER_LIST
# undefined
#
# TLS_CIPHER_LIST="ALL:!ADH:RC4+RSA:+SSLv2:@STRENGTH"
# TLS_TIMEOUT is currently not implemented, and reserved for future use.
# This is supposed to be an inactivity timeout, but its not yet implemented.
##NAME: TLS_DHCERTFILE:0
#
# TLS_DHCERTFILE - PEM file that stores our Diffie-Hellman cipher pair.
# When OpenSSL is compiled to use Diffie-Hellman ciphers instead of RSA
# you must generate a DH pair that will be used. In most situations the
# DH pair is to be treated as confidential, and the file specified by
# TLS_DHCERTFILE must not be world-readable.
#
# TLS_DHCERTFILE=
##NAME: TLS_CERTFILE:0
#
# TLS_CERTFILE - certificate to use. TLS_CERTFILE is required for SSL/TLS
# servers, and is optional for SSL/TLS clients. TLS_CERTFILE is usually
# treated as confidential, and must not be world-readable.
#
TLS_CERTFILE=/etc/courier/esmtpd.pem
##NAME: TLS_CERTINFO:0
#
# TLS_PEERCERTDIR, TLS_OURCACERT - when it is required that all peer
# certificates are signed by specific certificate authorities, set
# TLS_OURCACERT to the name of the file containing the certificate root keys,
# or set TLS_PEERCERTDIR to the name of the directory containing
# the certificate root keys.
#
# For convenience's sake, Courier installs a default set of root certificates
# (which has been swiped from Mozilla's CVS tree :-) ). Before enabling
# certificate verification, you should examine all the certificates in the
# following directory. ANY certificate signed by ANY root cert in
# TLS_PEERCERTDIR will be accepted
#
# TLS_PEERCERTDIR=/usr/lib/courier/rootcerts
# TLS_OURCACERT=
##NAME: TLS_VERIFYPEER:0
#
# TLS_VERIFYPEER - how to verify peer certificates. The possible values of
# this setting are:
#
# NONE - do not verify anything
#
# PEER - verify the peer certificate, if one's presented
#
# REQUIREPEER - require a peer certificate, fail if one's not presented
#
# SSL/TLS servers will usually set TLS_VERIFYPEER to NONE. SSL/TLS clients
# will usually set TLS_VERIFYPEER to REQUIREPEER.
#
TLS_VERIFYPEER=NONE
##NAME: MAILUSERGROUP:0
#
# Mail user and group
MAILUSER=daemon
MAILGROUP=daemon
##NAME: ADDRESS:0
#
# Address to listen on, can be set to a single IP address.
#
#
ADDRESS=xx.xxx.x.xxx
##NAME: PORT:1
#
# PORT specified the port number to listen on. The standard "smtp" port
# is port 25.
#
# Multiple port numbers can be separated by commas. When multiple port
# numbers are used it is possibly to select a specific IP address for a
# given port as "ip.port". For example, "127.0.0.1.900,192.68.0.1.900"
# accepts connections on port 900 on IP addresses 127.0.0.1 and 192.68.0.1
# The ADDRESS setting, if given, is a default for ports that do not have
# a specified IP address.
PORT=smtp
##NAME: BLACKLISTS:1
#
# Blacklists we query.
#
# The BLOCK environment variable is automatically enforced by submit.
# Nobody really does anything about BLOCK2, this is mainly for use by
# plug-in mail filters. If you want Courier to unilaterally block
# mail from IP addresses listed on the RBL and RSS, and you have a separate
# filter that keys off BLOCK2, uncomment the following. If you want
# to unilaterally block everything on the RBL and RSS, just replaced BLOCK2
# with BLOCK. DUL can be added too...
#
# BLACKLISTS='-block=blackholes.mail-abuse.org,BLOCK -block=relays.mail-abuse.org,BLOCK2'
BLACKLISTS=""
##NAME: ACCESSFILE:1
#
# Access file: $ACCESSFILE - plain text file/dir, $ACCESSFILE.dat - compiled
# database.
#
ACCESSFILE=${sysconfdir}/smtpaccess
##NAME: MAXDAEMONS:0
#
# Maximum number of daemons started
#
MAXDAEMONS=40
##NAME: MAXPERC:0
#
# Maximum number of connections accepted from the same C address block
#
MAXPERC=5
##NAME: MAXPERID:0
#
#
# Maximum number of connections accepted from the same IP address
MAXPERIP=5
##NAME: PIDFILE:0
#
# File where couriertcpd will save its process ID
#
PIDFILE=/var/run/courier/esmtpd.pid
##NAME: TCPDOPTS:2
#
# TCPDOPTS can contain other couriertcpd options, such as
# -nodnslookup and -noidentlookup.
#
TCPDOPTS="-stderrlogger=/usr/sbin/courierlogger"
##NAME: AUTHMODULES:5
#
# Do not touch the AUTHMODULES setting.
AUTHMODULES="authdaemon"
##NAME: ESMTPAUTH:4
#
# To enable authenticated SMTP relaying, uncomment the ESMTPAUTH setting,
# below, and set it to ESMTP authentication mechanisms we support. Currently
# LOGIN and CRAM-MD5 are available:
#
# ESMTPAUTH="LOGIN CRAM-MD5"
#
# You can also try PLAIN and CRAM-SHA1. See INSTALL for more information.
#
ESMTPAUTH="PLAIN"
##NAME: ESMTPAUTH_WEBADMIN:4
#
# ESMTPAUTH_WEBADMIN is used by the webadmin module
#
# Don't touch this setting.
ESMTPAUTH_WEBADMIN="LOGIN CRAM-MD5"
##NAME: ESMTPAUTHINFOTLS:3
#
# To enable SASL PLAIN authentication when using TLS, uncomment the following.
# To enable SASL PLAIN with or without TLS, just add PLAIN to ESMTPAUTH,
# above:
#
# ESMTPAUTH_TLS="PLAIN LOGIN CRAM-MD5"
#
# ESMTPAUTH_TLS_WEBADMIN is used by the webadmin module
ESMTPAUTH_TLS=""
##NAME: ESMTPAUTH_TLS_WEBADMIN:4
ESMTPAUTH_TLS_WEBADMIN="PLAIN LOGIN CRAM-MD5"
##NAME: ESMTPDSTART:0
#
# ESMTPDSTART is not referenced anywhere in the standard Courier programs
# or scripts. Rather, this is a convenient flag to be read by your system
# startup script in /etc/rc.d, like this:
#
# prefix=/usr
# exec_prefix=/usr
# . ${sysconfdir}/esmtpd
# case x$ESMTPDSTART in
# x[yY]*)
# /usr/sbin/esmtpd start
# ;;
# esac
#
# The default setting is going to be NO, until Courier is shipped by default
# with enough platforms so that people get annoyed with having to flip it to
# YES every time.
ESMTPDSTART=YES
Meine Distribution ist Debain Sarge.
Hat jemand eine Idee, wie man mein Problem lösen kann.
Probiere seit einigen Tagen Courier-MTA einzurichten. Bis jetzt habe ich es aber noch nicht richtig hinbekommen. Die Manpages kann ich mittlerweile fast auswendig und alle un-/brauchbaren Tutorials hab ich schon durchgelesen. An einem Problem komme ich einfach nicht weiter:
Wenn ich an meinen Mailserver eine eMail versende kommt diese immer mit der Fehlermeldung "535 Authentication required" zurück.
Das Problem tritt auf, seit ich SMTP Auth eingerichtet habe. Meine Domain, habe ich in esmtpaccess.dir in einer File names accept eingetragen und auch mit makeacceptmailsfor in eine Datenbank umgewandelt. Die Domain ist außerdem noch bei hosteddomains eingetragen.
##VERSION: $Id: esmtpd.dist.in,v 1.18 2004/05/11 00:48:14 mrsam Exp $
#
#
# esmtpd created from esmtpd.dist by sysconftool
#
# Do not alter lines that begin with ##, they are used when upgrading
# this configuration.
#
# Copyright 1998 - 2004 Double Precision, Inc. See COPYING for
# distribution information.
#
# This configuration file sets various options for Courier's esmtpd server.
# It is started by couriertcpd, Courier's TCP server.
# A lot of the stuff here is documented in the manual page for couriertcpd.
##NAME: PATH:0
#
# Specify the default PATH that everything inherits.
PATH=/usr/bin:/bin:/usr/bin:/usr/local/bin
##NAME: SHELL:0
#
# The default shell
SHELL=/bin/sh
##NAME: ULIMIT:0
#
# Sets the maximum size of courieresmtpd's data segment
#
ULIMIT=4096
##NAME: BOFHCHECKDNS:0
#
# Comment out the following line in order to accept mail with a bad
# return address.
BOFHCHECKDNS=1
##NAME: BOFHNOEXPN:1
#
# Set BOFHNOEXP to 1 to disable EXPN
BOFHNOEXPN=1
##NAME: BOFHNOVRFY:1
#
# Set BOFHNOVERIFY to disable VRFY
BOFHNOVRFY=1
##NAME: NOADDMSGID:0
#
# The following environment variables keep Courier from adding
# default Date: and Message-ID: header to messages which do not have them.
# If you would like to add default headers only for mail from certain
# IP address ranges, you can override them in couriertcpd access file,
# see couriertcpd(8).
NOADDMSGID=1
##NAME: NOADDDATE:0
#
NOADDDATE=1
##NAME: ESMTP_LOG_DIALOG:0
#
# If set, log the esmtp dialog.
ESMTP_LOG_DIALOG=0
##NAME: AUTH_REQUIRED:0
#
# Set AUTH_REQUIRED to 1 in order to force the client to use ESMTP
# authentication. You can override AUTH_REQUIRED on a per-IP address basis
# using smtpaccess. See makesmtpaccess(8).
AUTH_REQUIRED=1
################################################## #######################
#
##NAME: COURIERTLS:0
#
# The following variables configure ESMTP STARTTLS. If OpenSSL is available
# during configuration, the couriertls helper gets compiled, and upon
# installation a dummy TLS_CERTFILE gets generated. courieresmtpd will
# automatically advertise the ESMTP STARTTLS extension if both TLS_CERTFILE
# and COURIERTLS exist.
#
# WARNING: Peer certificate verification has NOT yet been tested. Proceed
# at your own risk. Only the basic SSL/TLS functionality is known to be
# working. Keep this in mind as you play with the following variables.
COURIERTLS=/usr/bin/couriertls
##NAME: ESMTP_TLS_REQUIRED:0
#
# Set ESMTP_TLS_REQUIRED to 1 if you REQUIRE SSL/TLS to be used for receiving
# mail. Setting it here will require it for every connection. You can also
# set ESMTP_TLS_REQUIRED in the smtpaccess file, see makesmtpaccess(8) for
# more information
#
# ESMTP_TLS_REQUIRED=1
##NAME: TLS_PROTOCOL:0
#
#
# TLS_PROTOCOL sets the protocol version. The possible versions are:
#
# SSL2 - SSLv2
# SSL3 - SSLv3
# TLS1 - TLS1
TLS_PROTOCOL=SSL3
##NAME: TLS_CIPHER_LIST:0
#
# TLS_CIPHER_LIST optionally sets the list of ciphers to be used by the
# OpenSSL library. In most situations you can leave TLS_CIPHER_LIST
# undefined
#
# TLS_CIPHER_LIST="ALL:!ADH:RC4+RSA:+SSLv2:@STRENGTH"
# TLS_TIMEOUT is currently not implemented, and reserved for future use.
# This is supposed to be an inactivity timeout, but its not yet implemented.
##NAME: TLS_DHCERTFILE:0
#
# TLS_DHCERTFILE - PEM file that stores our Diffie-Hellman cipher pair.
# When OpenSSL is compiled to use Diffie-Hellman ciphers instead of RSA
# you must generate a DH pair that will be used. In most situations the
# DH pair is to be treated as confidential, and the file specified by
# TLS_DHCERTFILE must not be world-readable.
#
# TLS_DHCERTFILE=
##NAME: TLS_CERTFILE:0
#
# TLS_CERTFILE - certificate to use. TLS_CERTFILE is required for SSL/TLS
# servers, and is optional for SSL/TLS clients. TLS_CERTFILE is usually
# treated as confidential, and must not be world-readable.
#
TLS_CERTFILE=/etc/courier/esmtpd.pem
##NAME: TLS_CERTINFO:0
#
# TLS_PEERCERTDIR, TLS_OURCACERT - when it is required that all peer
# certificates are signed by specific certificate authorities, set
# TLS_OURCACERT to the name of the file containing the certificate root keys,
# or set TLS_PEERCERTDIR to the name of the directory containing
# the certificate root keys.
#
# For convenience's sake, Courier installs a default set of root certificates
# (which has been swiped from Mozilla's CVS tree :-) ). Before enabling
# certificate verification, you should examine all the certificates in the
# following directory. ANY certificate signed by ANY root cert in
# TLS_PEERCERTDIR will be accepted
#
# TLS_PEERCERTDIR=/usr/lib/courier/rootcerts
# TLS_OURCACERT=
##NAME: TLS_VERIFYPEER:0
#
# TLS_VERIFYPEER - how to verify peer certificates. The possible values of
# this setting are:
#
# NONE - do not verify anything
#
# PEER - verify the peer certificate, if one's presented
#
# REQUIREPEER - require a peer certificate, fail if one's not presented
#
# SSL/TLS servers will usually set TLS_VERIFYPEER to NONE. SSL/TLS clients
# will usually set TLS_VERIFYPEER to REQUIREPEER.
#
TLS_VERIFYPEER=NONE
##NAME: MAILUSERGROUP:0
#
# Mail user and group
MAILUSER=daemon
MAILGROUP=daemon
##NAME: ADDRESS:0
#
# Address to listen on, can be set to a single IP address.
#
#
ADDRESS=xx.xxx.x.xxx
##NAME: PORT:1
#
# PORT specified the port number to listen on. The standard "smtp" port
# is port 25.
#
# Multiple port numbers can be separated by commas. When multiple port
# numbers are used it is possibly to select a specific IP address for a
# given port as "ip.port". For example, "127.0.0.1.900,192.68.0.1.900"
# accepts connections on port 900 on IP addresses 127.0.0.1 and 192.68.0.1
# The ADDRESS setting, if given, is a default for ports that do not have
# a specified IP address.
PORT=smtp
##NAME: BLACKLISTS:1
#
# Blacklists we query.
#
# The BLOCK environment variable is automatically enforced by submit.
# Nobody really does anything about BLOCK2, this is mainly for use by
# plug-in mail filters. If you want Courier to unilaterally block
# mail from IP addresses listed on the RBL and RSS, and you have a separate
# filter that keys off BLOCK2, uncomment the following. If you want
# to unilaterally block everything on the RBL and RSS, just replaced BLOCK2
# with BLOCK. DUL can be added too...
#
# BLACKLISTS='-block=blackholes.mail-abuse.org,BLOCK -block=relays.mail-abuse.org,BLOCK2'
BLACKLISTS=""
##NAME: ACCESSFILE:1
#
# Access file: $ACCESSFILE - plain text file/dir, $ACCESSFILE.dat - compiled
# database.
#
ACCESSFILE=${sysconfdir}/smtpaccess
##NAME: MAXDAEMONS:0
#
# Maximum number of daemons started
#
MAXDAEMONS=40
##NAME: MAXPERC:0
#
# Maximum number of connections accepted from the same C address block
#
MAXPERC=5
##NAME: MAXPERID:0
#
#
# Maximum number of connections accepted from the same IP address
MAXPERIP=5
##NAME: PIDFILE:0
#
# File where couriertcpd will save its process ID
#
PIDFILE=/var/run/courier/esmtpd.pid
##NAME: TCPDOPTS:2
#
# TCPDOPTS can contain other couriertcpd options, such as
# -nodnslookup and -noidentlookup.
#
TCPDOPTS="-stderrlogger=/usr/sbin/courierlogger"
##NAME: AUTHMODULES:5
#
# Do not touch the AUTHMODULES setting.
AUTHMODULES="authdaemon"
##NAME: ESMTPAUTH:4
#
# To enable authenticated SMTP relaying, uncomment the ESMTPAUTH setting,
# below, and set it to ESMTP authentication mechanisms we support. Currently
# LOGIN and CRAM-MD5 are available:
#
# ESMTPAUTH="LOGIN CRAM-MD5"
#
# You can also try PLAIN and CRAM-SHA1. See INSTALL for more information.
#
ESMTPAUTH="PLAIN"
##NAME: ESMTPAUTH_WEBADMIN:4
#
# ESMTPAUTH_WEBADMIN is used by the webadmin module
#
# Don't touch this setting.
ESMTPAUTH_WEBADMIN="LOGIN CRAM-MD5"
##NAME: ESMTPAUTHINFOTLS:3
#
# To enable SASL PLAIN authentication when using TLS, uncomment the following.
# To enable SASL PLAIN with or without TLS, just add PLAIN to ESMTPAUTH,
# above:
#
# ESMTPAUTH_TLS="PLAIN LOGIN CRAM-MD5"
#
# ESMTPAUTH_TLS_WEBADMIN is used by the webadmin module
ESMTPAUTH_TLS=""
##NAME: ESMTPAUTH_TLS_WEBADMIN:4
ESMTPAUTH_TLS_WEBADMIN="PLAIN LOGIN CRAM-MD5"
##NAME: ESMTPDSTART:0
#
# ESMTPDSTART is not referenced anywhere in the standard Courier programs
# or scripts. Rather, this is a convenient flag to be read by your system
# startup script in /etc/rc.d, like this:
#
# prefix=/usr
# exec_prefix=/usr
# . ${sysconfdir}/esmtpd
# case x$ESMTPDSTART in
# x[yY]*)
# /usr/sbin/esmtpd start
# ;;
# esac
#
# The default setting is going to be NO, until Courier is shipped by default
# with enough platforms so that people get annoyed with having to flip it to
# YES every time.
ESMTPDSTART=YES
Meine Distribution ist Debain Sarge.
Hat jemand eine Idee, wie man mein Problem lösen kann.