PDA

Archiv verlassen und diese Seite im Standarddesign anzeigen : Hibernate: Andere Swap-Partition verwenden



Luzi P
01.09.06, 14:20
Hallo,

ich hatte auf meinem Laptop FSC Amilo Pro v2030 mit Kanotix eine Swap-Partition mit 500MB angelegt (sda5). Allerdings scheint sie zu klein zu sein, wenn ich den Hibernate mit geöffnetem Qemu(w2k) und Openoffice auslöse. Dabei benutze ich acpi_sleep.
Also habe ich eine ungenutzte Partition als Swap formatiert und eingehängt (sda1). Diese wird im normalen Betrieb auch verwendet. Allerdings erhalte ich jetzt beim Hibernate als Fehlermeldung


/bin/echo: Schreibfehler: Kein passendes Gerät gefunden

und der Rechner fährt wieder hoch.
Deaktiviere ich die neue Swap-Partition, funktioniert es wieder. Außerdem habe ich versucht, die Priorität der neuen hinter die der alten Partition zu stellen, was auch nicht geholfen hat.

Wo muss ich die neue Swap-Partition noch eintragen?
Was braucht ihr noch für Informationen?

Danke für die Hilfe.

Hier die fstab:


/dev/sda1 none swap sw 0 0
/dev/sda5 none swap sw 0 0


cat /proc/swaps


Filename Type Size Used Priority
/dev/sda1 partition 2931820 30692 -1
/dev/sda5 partition 489940 0 -2


fdisk -l


/dev/sda1 1 365 2931831 82 Linux Swap / Solaris
/dev/sda5 1344 1404 489951 82 Linux Swap / Solaris


/etc/hibernate/hibernate.conf


# Example hibernate.conf file. Adapt to your own tastes.
# Options are not case sensitive.
#
# Run "hibernate -h" for help on the configuration items.

################################################## ############################
### Choose your Suspend method. You currently have 3 choices:
###
### suspend2 Software Suspend 2 (requires kernel patches from
### http://www.suspend2.net/)
###
### sysfs_power_state Uses /sys/power/state to suspend (activates pmdisk
### on kernels < 2.6.8, or vanilla swsusp otherwise).
###
### acpi_sleep Uses /proc/acpi/sleep to activate swsusp, or other
### ACPI sleep state supported by your machine.
###
################################################## ############################

### suspend2 (for Software Suspend 2)
# UseSuspend2 yes
# Reboot no
# EnableEscape yes
# DefaultConsoleLevel 1
# Compressor lzf
# Encryptor none
# ImageSizeLimit 200
## useful for initrd usage:
# SuspendDevice swap:/dev/sda1
## Powerdown method - 3 for suspend-to-RAM, 4 for ACPI S4 sleep, 5 for poweroff
# PowerdownMethod 5
## Any other /proc/software_suspend setting can be set like so:
# ProcSetting expected_compression 50
## Or traditionally like this:
# Suspend2AllSettings 0 0 2056 65535 5
## Or even from the results of hibernate --save-settings with this:
# Suspend2AllSettingsFile /etc/hibernate/suspend-settings.conf
## For filewriter:
# FilewriterLocation /suspend_file 1000
# VerifyFilewriterResume2 yes
# ProcSetting userui_program /usr/local/sbin/suspend2ui_text

### sysfs_power_state
## To use /sys/power/state to suspend your machine (which may offer
## suspend-to-RAM, suspend-to-disk, standby, etc) comment out all the options
## above for Software Suspend 2, below for acpi_sleep, and uncomment this line.
## You may replace mem with any one of the states from "cat /sys/power/state"
#UseSysfsPowerState disk
#PowerdownMethod shutdown

### acpi_sleep
## To use ACPI to suspend your machine (via /proc/acpi/sleep), comment out
## all the options above for Software Suspend 2 and sysfs, and uncomment this
## line. The number refers to the ACPI sleep state - 3 is suspend-to-RAM and
## 4 is suspend-to-disk.
UseACPISleep 4

################################################## ############################
### Some global settings
################################################## ############################

Verbosity 0
LogFile /var/log/hibernate.log
LogVerbosity 1
# AlwaysForce yes
# AlwaysKill yes
HibernateVT 5
Distribution debian
# XDisplay :0

################################################## ############################
### Scriptlets
### Scriptlets provide support for doing all sorts of things before and after
### suspending. The defaults settings here should work for most people, but
### you may wish to edit these to taste. Consult "hibernate -h" for help on
### the configuration settings.
################################################## ############################

### bootsplash
## If you use bootsplash, also enabling SwitchToTextMode is recommended if
## you use X, otherwise you may end up with a garbled X display.
# Bootsplash on
# BootsplashConfig /etc/bootsplash/default/config/bootsplash-1024x768.cfg

### clock
SaveClock restore-only

### devices
# IncompatibleDevices /dev/dsp /dev/video*

### diskcache
# DisableWriteCacheOn /dev/hda

### fbsplash (enable SwitchToTextMode if you use this)
# FBSplash on
# FBSplashTheme suspend2

### filesystems
# Unmount /nfsshare /windows /mnt/sambaserver
# UnmountFSTypes smbfs nfs
# UnmountGraceTime 1
# Mount /windows

### grub
# ChangeGrubMenu yes
# GrubMenuFile /boot/grub/menu.lst
# AlternateGrubMenuFile /boot/grub/menu-suspended.lst
# BackupGrubMenuFile /boot/grub/menu.lst.hibernate.bak

### hardware_tweaks
# IbmAcpi yes
# RadeonTool yes

### lilo
# EnsureLILOResumes yes

### lock (generally you only want one of the following options)
# LockConsoleAs root
# LockXScreenSaver yes
# LockKDE yes
# LockXLock yes
# LockXAutoLock yes

### misclaunch
OnSuspend 20 echo "Good night!"
OnResume 20 echo "Good morning!"

### modules
# UnloadModules snd_via82cxxx usb-ohci
# UnloadAllModules yes
UnloadBlacklistedModules yes
LoadModules auto
# LoadModulesFromFile /etc/modules

### modules-gentoo
# GentooModulesAutoload yes

### network
DownInterfaces eth0
UpInterfaces auto

### pcmcia
# EjectCards yes

### programs
# IncompatiblePrograms xmms

### services
# RestartServices postfix
# StopServices alsasound
# StartServices aumix

### vbetool
# EnableVbetool yes
# RestoreVbeStateFrom /var/lib/vbetool/vbestate
# VbetoolPost yes
# RestoreVCSAData yes

### xhacks
SwitchToTextMode yes
# UseDummyXServer yes

### xstatus
## This can be set to gnome, kde or x:
# XStatus gnome
# XSuspendText Preparing to suspend...
# XResumeText Resuming from suspend...
## When using XStatus x, and you have xosd installed:
# XosdSettings --font -misc-fixed-medium-r-semicondensed--*-120-*-*-c-*-*-* --colour=Green --shadow 1 --pos bottom --align center --offset 50