redangelfreak
16.08.06, 09:12
Hallo Community,
hier mal eine ungewöhnliche Situation.
Ein Server, auf den ich nur via SSH zugreifen kann besitzt mehrere Platten. Auf einer ist das System, was auch problemlos startet. Allerdings finde weis ich nicht wo die anderen 4 Platten versteckt sind. Ich vermute, dass diese an einem Controller hängen, der nicht richtig geladen wird:
Hier mal ein paar Daten:
Ausgabe "dmesg"
Bootdata ok (command line is root=/dev/sda1 vga=0x314 selinux=0 splash=silent console=tty0 resume=/dev/sda2)
Linux version 2.6.11.4-20a-smp (geeko@buildhost) (gcc version 3.3.5 20050117 (prerelease) (SUSE Linux)) #1 SMP Wed Mar 23 21:52:37 UTC 2005
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009c400 (usable)
BIOS-e820: 000000000009c400 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000f7ff0000 (usable)
BIOS-e820: 00000000f7ff0000 - 00000000f7fff000 (ACPI data)
BIOS-e820: 00000000f7fff000 - 00000000f8000000 (ACPI NVS)
BIOS-e820: 00000000ff780000 - 0000000100000000 (reserved)
ACPI: RSDP (v002 ACPIAM ) @ 0x00000000000f6d70
ACPI: XSDT (v001 A M I OEMXSDT 0x03000620 MSFT 0x00000097) @ 0x00000000f7ff0100
ACPI: FADT (v001 A M I OEMFACP 0x03000620 MSFT 0x00000097) @ 0x00000000f7ff0281
ACPI: MADT (v001 A M I OEMAPIC 0x03000620 MSFT 0x00000097) @ 0x00000000f7ff0380
ACPI: OEMB (v001 A M I OEMBIOS 0x03000620 MSFT 0x00000097) @ 0x00000000f7fff040
ACPI: SRAT (v001 A M I OEMSRAT 0x03000620 MSFT 0x00000097) @ 0x00000000f7ff3b60
ACPI: HPET (v001 A M I OEMHPET 0x03000620 MSFT 0x00000097) @ 0x00000000f7ff3c70
ACPI: ASF! (v001 AMIASF AMDSTRET 0x00000001 INTL 0x02002026) @ 0x00000000f7ff3cb0
ACPI: DSDT (v001 0AAAA 0AAAA000 0x00000000 INTL 0x02002026) @ 0x0000000000000000
SRAT: PXM 0 -> APIC 0 -> Node 0
SRAT: PXM 1 -> APIC 1 -> Node 1
SRAT: Node 0 PXM 0 100000-7fffffff
SRAT: Node 1 PXM 1 80000000-f7ffffff
SRAT: Node 1 PXM 1 80000000-ffffffff
SRAT: Node 0 PXM 0 0-7fffffff
node 1 shift 24 addr ff000000 conflict 0
Bootmem setup node 0 0000000000000000-000000007fffffff
Bootmem setup node 1 0000000080000000-00000000f7feffff
On node 0 totalpages: 524287
DMA zone: 4096 pages, LIFO batch:1
Normal zone: 520191 pages, LIFO batch:16
HighMem zone: 0 pages, LIFO batch:1
On node 1 totalpages: 491503
DMA zone: 0 pages, LIFO batch:1
Normal zone: 491503 pages, LIFO batch:16
HighMem zone: 0 pages, LIFO batch:1
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Processor #0 15:5 APIC version 16
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
Processor #1 15:5 APIC version 16
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x03] address[0xfebff000] gsi_base[24])
IOAPIC[1]: apic_id 3, version 17, address 0xfebff000, GSI 24-27
ACPI: IOAPIC (id[0x04] address[0xfebfe000] gsi_base[28])
IOAPIC[2]: apic_id 4, version 17, address 0xfebfe000, GSI 28-31
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Setting APIC routing to flat
ACPI: HPET id: 0x102282a0 base: 0xfec01000
Using ACPI (MADT) for SMP configuration information
Checking aperture...
CPU 0: aperture @ f8000000 size 64 MB
CPU 1: aperture @ f8000000 size 64 MB
Built 2 zonelists
Kernel command line: root=/dev/sda1 vga=0x314 selinux=0 splash=silent console=tty0 resume=/dev/sda2
bootsplash: silent mode.
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 131072 bytes)
time.c: Using 14.318180 MHz HPET timer.
time.c: Detected 2191.621 MHz processor.
Console: colour dummy device 80x25
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Memory: 3993496k/4063168k available (2280k kernel code, 0k reserved, 1179k data, 212k init)
Calibrating delay loop... 4325.37 BogoMIPS (lpj=2162688)
Security Framework v1.0.0 initialized
SELinux: Disabled at boot.
Mount-cache hash table entries: 256 (order: 0, 4096 bytes)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
CPU 0(1) -> Node 0
checking if image is initramfs... it is
ACPI: Looking for DSDT in initrd... not found!
not found!
Using local APIC NMI watchdog using perfctr0
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
CPU 0(1) -> Node 0
CPU0: AMD Opteron(tm) Processor 248 stepping 0a
per-CPU timeslice cutoff: 1024.16 usecs.
task migration cache decay timeout: 2 msecs.
Booting processor 1/1 rip 6000 rsp ffff810082187f58
Initializing CPU#1
Calibrating delay loop... 4374.52 BogoMIPS (lpj=2187264)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
CPU 1(1) -> Node 1
AMD Opteron(tm) Processor 248 stepping 0a
Total of 2 processors activated (8699.90 BogoMIPS).
Using local APIC timer interrupts.
Detected 12.452 MHz APIC timer.
checking TSC synchronization across 2 CPUs: passed.
time.c: Using HPET based timekeeping.
Brought up 2 CPUs
NET: Registered protocol family 16
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20050211
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.GOLA._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.GOLB._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
TC classifier action (bugs to netdev@oss.sgi.com cc hadi@cyberus.ca)
hpet0: at MMIO 0xfec01000, IRQs 2, 8, 0
hpet0: 69ns tick, 3 32-bit timers
PCI-DMA: Disabling IOMMU.
IA32 emulation $Id: sys_ia32.c,v 1.32 2002/03/24 13:02:28 ak Exp $
audit: initializing netlink socket (disabled)
audit(1154363126.408:0): initialized
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
Initializing Cryptographic API
vesafb: framebuffer at 0xfd000000, mapped to 0xffffc20000080000, using 3750k, total 8128k
vesafb: mode is 800x600x16, linelength=1600, pages=7
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
bootsplash 3.1.6-2004/03/31: looking for picture...<6> silentjpeg size 39926 bytes,<6>...found (800x600, 25182 bytes, v3).
Console: switching to colour frame buffer device 99x34
fb0: VESA VGA frame buffer device
Real Time Clock Driver v1.12
hpet_acpi_add: no address or irqs in _CRS
Non-volatile memory driver v1.2
Linux agpgart interface v0.100 (c) Dave Jones
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing disabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
RAMDISK driver initialized: 16 RAM disks of 128000K size 1024 blocksize
loop: loaded (max 8 devices)
mice: PS/2 mouse device common for all mice
input: PC Speaker
md: md driver 0.90.1 MAX_MD_DEVS=256, MD_SB_DISKS=27
NET: Registered protocol family 2
IP: routing cache hash table of 16384 buckets, 256Kbytes
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
NET: Registered protocol family 1
ACPI wakeup devices:
PCI1 USB0 USB1 MBE0 PS2K PS2M UAR1 UAR2 GOLA GLAN GOLB SMBC AC97 MODM PWRB
ACPI: (supports S0 S1 S4 S5)
Freeing unused kernel memory: 212k freed
input: AT Translated Set 2 keyboard on isa0060/serio0
SCSI subsystem initialized
libata version 1.10 loaded.
sata_sil version 0.8
ACPI: PCI interrupt 0000:03:05.0[A] -> GSI 19 (level, low) -> IRQ 169
ata1: SATA max UDMA/100 cmd 0xFFFFC20000006C80 ctl 0xFFFFC20000006C8A bmdma 0xFFFFC20000006C00 irq 169
input: ImPS/2 Generic Wheel Mouse on isa0060/serio1
ata2: SATA max UDMA/100 cmd 0xFFFFC20000006CC0 ctl 0xFFFFC20000006CCA bmdma 0xFFFFC20000006C08 irq 169
ata3: SATA max UDMA/100 cmd 0xFFFFC20000006E80 ctl 0xFFFFC20000006E8A bmdma 0xFFFFC20000006E00 irq 169
ata4: SATA max UDMA/100 cmd 0xFFFFC20000006EC0 ctl 0xFFFFC20000006ECA bmdma 0xFFFFC20000006E08 irq 169
ata1: dev 0 cfg 49:2f00 82:346b 83:7d01 84:4023 85:3469 86:3c01 87:4023 88:407f
ata1: dev 0 ATA-7, max UDMA/133, 488397168 sectors: LBA48
ata1: dev 0 configured for UDMA/100
scsi0 : sata_sil
ata2: no device found (phy stat 00000000)
scsi1 : sata_sil
ata3: no device found (phy stat 00000000)
scsi2 : sata_sil
ata4: no device found (phy stat 00000000)
scsi3 : sata_sil
Vendor: ATA Model: ST3250823AS Rev: 3.03
Type: Direct-Access ANSI SCSI revision: 05
SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB)
SCSI device sda: drive cache: write back
SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB)
SCSI device sda: drive cache: write back
sda: sda1 sda2 sda3
Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
AMD8111: IDE controller at PCI slot 0000:00:07.1
AMD8111: chipset revision 3
AMD8111: not 100% native mode: will probe irqs later
AMD8111: 0000:00:07.1 (rev 03) UDMA133 controller
ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:pio, hdb:pio
ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:pio, hdd:DMA
Probing IDE interface ide0...
Probing IDE interface ide1...
hdd: LILITE-ON DVD SOHD-16P6P9S, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hdd: status error: status=0x58 { DriveReady SeekComplete DataRequest }
ide: failed opcode was: unknown
hdd: drive not ready for command
hdd: status timeout: status=0xd0 { Busy }
ide: failed opcode was: unknown
hdd: drive not ready for command
hdd: ATAPI reset complete
hdd: ATAPI 48X DVD-ROM drive, 254kB Cache
Uniform CD-ROM driver Revision: 3.20
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
bootsplash: status on console 0 changed to on
JBD: barrier-based sync failed on sda1 - disabling barriers
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
Adding 5245212k swap on /dev/sda2. Priority:42 extents:1
device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com
JBD: barrier-based sync failed on sda1 - disabling barriers
Losing some ticks... checking if CPU frequency changed.
parport0: PC-style at 0x378 [PCSPP]
lp0: using parport0 (polling).
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda3, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
tg3.c:v3.23 (February 15, 2005)
ACPI: PCI interrupt 0000:02:09.0[A] -> GSI 24 (level, low) -> IRQ 177
eth0: Tigon3 [partno(BCM95704A7) rev 2003 PHY(5704)] (PCIX:100MHz:64-bit) 10/100/1000BaseT Ethernet 00:e0:81:31:73:38
eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[1] TSOcap[1]
ACPI: PCI interrupt 0000:02:09.1[B] -> GSI 25 (level, low) -> IRQ 185
eth1: Tigon3 [partno(BCM95704A7) rev 2003 PHY(5704)] (PCIX:100MHz:64-bit) 10/100/1000BaseT Ethernet 00:e0:81:31:73:39
eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[1] TSOcap[1]
Capability LSM initialized
ieee1394: Initialized config rom entry `ip1394'
ieee1394: raw1394: /dev/raw1394 device initialized
video1394: Installed video1394 module
cdrom: open failed.
Attached scsi generic sg0 at scsi0, channel 0, id 0, lun 0, type 0
st: Version 20041025, fixed bufsize 32768, s/g segs 256
BIOS EDD facility v0.16 2004-Jun-25, 2 devices found
bootsplash: status on console 0 changed to on
NET: Registered protocol family 17
tg3: eth0: Link is up at 1000 Mbps, full duplex.
tg3: eth0: Flow control is off for TX and off for RX.
bootsplash: status on console 0 changed to on
NET: Registered protocol family 10
Disabled Privacy Extensions on device ffffffff80425c00(lo)
IPv6 over IPv4 tunneling driver
Disabled Privacy Extensions on device ffff81007d5d5800(sit0)
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
end_request: I/O error, dev fd0, sector 0
end_request: I/O error, dev fd0, sector 0
ACPI: Power Button (FF) [PWRF]
ACPI: Processor [CPU1] (supports 8 throttling states)
ACPI-0484: *** Warning: Error getting cpuindex for acpiid 0x3
ACPI-0484: *** Warning: Error getting cpuindex for acpiid 0x4
powernow-k8: Found 2 AMD Athlon 64 / Opteron processors (version 1.00.09e)
powernow-k8: 0 : fid 0xe (2200 MHz), vid 0x2 (1500 mV)
powernow-k8: 1 : fid 0xc (2000 MHz), vid 0x6 (1400 mV)
powernow-k8: 2 : fid 0xa (1800 MHz), vid 0x8 (1350 mV)
powernow-k8: 3 : fid 0x2 (1000 MHz), vid 0x8 (1350 mV)
cpu_init done, current fid 0xe, vid 0x2
powernow-k8: 0 : fid 0xe (2200 MHz), vid 0x2 (1500 mV)
powernow-k8: 1 : fid 0xc (2000 MHz), vid 0x6 (1400 mV)
powernow-k8: 2 : fid 0xa (1800 MHz), vid 0x8 (1350 mV)
powernow-k8: 3 : fid 0x2 (1000 MHz), vid 0x8 (1350 mV)
cpu_init done, current fid 0xe, vid 0x2
usbcore: registered new driver usbfs
usbcore: registered new driver hub
drivers/usb/serial/usb-serial.c: USB Serial support registered for Generic
usbcore: registered new driver usbserial_generic
usbcore: registered new driver usbserial
drivers/usb/serial/usb-serial.c: USB Serial Driver core v2.0
mtrr: 0xfd000000,0x800000 overlaps existing 0xfd000000,0x400000
mtrr: 0xfd000000,0x800000 overlaps existing 0xfd000000,0x400000
subfs 0.9
bootsplash: status on console 0 changed to on
eth0: no IPv6 routers present
cdrom: open failed.
cdrom: open failed.
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
powertweakd[7212]: segfault at 00002aaa00000000 rip 00002aaaab2d36a0 rsp 00007fffffffeb78 error 4
parport0: PC-style at 0x378 [PCSPP]
lp0: using parport0 (polling).
ppa: Version 2.07 (for Linux 2.4.x)
end_request: I/O error, dev fd0, sector 0
end_request: I/O error, dev fd0, sector 0
cdrom: open failed.
cdrom: open failed.
cdrom: open failed.
cdrom: open failed.
cdrom: open failed.
cdrom: open failed.
cdrom: open failed.
cdrom: open failed.
cdrom: open failed.
cdrom: open failed.
cdrom: open failed.
powertweakd[7782]: segfault at 00002aaa00000000 rip 00002aaaab2d36a0 rsp 00007fffffffeb78 error 4
JBD: barrier-based sync failed on sda3 - disabling barriers
xfs_db[23779]: segfault at 0000000000000122 rip 0000000000414a78 rsp 00007ffffffff510 error 4
xfs_db[23782]: segfault at 0000000000000122 rip 0000000000414a78 rsp 00007ffffffff510 error 4
xfs_db[23808]: segfault at 0000000000000122 rip 0000000000414a78 rsp 00007ffffffff510 error 4
xfs_db[23811]: segfault at 0000000000000122 rip 0000000000414a78 rsp 00007ffffffff510 error 4
xfs_db[23943]: segfault at 0000000000000122 rip 0000000000414a78 rsp 00007ffffffff570 error 4
xfs_db[23947]: segfault at 0000000000000122 rip 0000000000414a78 rsp 00007ffffffff570 error 4
xfs_db[23950]: segfault at 0000000000000122 rip 0000000000414a78 rsp 00007ffffffff570 error 4
xfs_db[23987]: segfault at 0000000000000122 rip 0000000000414a78 rsp 00007ffffffff540 error 4
xfs_db[23991]: segfault at 0000000000000122 rip 0000000000414a78 rsp 00007ffffffff540 error 4
xfs_db[23994]: segfault at 0000000000000122 rip 0000000000414a78 rsp 00007ffffffff540 error 4
xfs_db[24037]: segfault at 0000000000000122 rip 0000000000414a78 rsp 00007ffffffff520 error 4
xfs_db[24040]: segfault at 0000000000000122 rip 0000000000414a78 rsp 00007ffffffff520 error 4
xfs_db[24043]: segfault at 0000000000000122 rip 0000000000414a78 rsp 00007ffffffff520 error 4
xfs_db[24084]: segfault at 0000000000000122 rip 0000000000414a78 rsp 00007ffffffff530 error 4
xfs_db[24087]: segfault at 0000000000000122 rip 0000000000414a78 rsp 00007ffffffff530 error 4
xfs_db[24090]: segfault at 0000000000000122 rip 0000000000414a78 rsp 00007ffffffff530 error 4
xfs_db[24178]: segfault at 0000000000000122 rip 0000000000414a78 rsp 00007ffffffff570 error 4
xfs_db[24182]: segfault at 0000000000000122 rip 0000000000414a78 rsp 00007ffffffff570 error 4
xfs_db[24185]: segfault at 0000000000000122 rip 0000000000414a78 rsp 00007ffffffff570 error 4
end_request: I/O error, dev fd0, sector 0
cdrom: open failed.
xfs_db[25440]: segfault at 0000000000000122 rip 0000000000414a78 rsp 00007ffffffff530 error 4
xfs_db[25443]: segfault at 0000000000000122 rip 0000000000414a78 rsp 00007ffffffff530 error 4
xfs_db[25446]: segfault at 0000000000000122 rip 0000000000414a78 rsp 00007ffffffff530 error 4
xfs_db[25596]: segfault at 0000000000000122 rip 0000000000414a78 rsp 00007ffffffff570 error 4
xfs_db[25600]: segfault at 0000000000000122 rip 0000000000414a78 rsp 00007ffffffff570 error 4
xfs_db[25603]: segfault at 0000000000000122 rip 0000000000414a78 rsp 00007ffffffff570 error 4
raid5: automatically using best checksumming function: generic_sse
generic_sse: 3040.000 MB/sec
raid5: using function: generic_sse (3040.000 MB/sec)
md: raid5 personality registered as nr 4
xfs_db[25863]: segfault at 0000000000000122 rip 0000000000414a78 rsp 00007ffffffff510 error 4
xfs_db[25866]: segfault at 0000000000000122 rip 0000000000414a78 rsp 00007ffffffff510 error 4
xfs_db[25869]: segfault at 0000000000000122 rip 0000000000414a78 rsp 00007ffffffff510 error 4
xfs_db[25885]: segfault at 0000000000000122 rip 0000000000414a78 rsp 00007ffffffff570 error 4
xfs_db[25889]: segfault at 0000000000000122 rip 0000000000414a78 rsp 00007ffffffff570 error 4
xfs_db[25892]: segfault at 0000000000000122 rip 0000000000414a78 rsp 00007ffffffff570 error 4
FAT: unable to read boot sector
xfs_db[26772]: segfault at 0000000000000122 rip 0000000000414a78 rsp 00007ffffffff570 error 4
xfs_db[26776]: segfault at 0000000000000122 rip 0000000000414a78 rsp 00007ffffffff570 error 4
xfs_db[26779]: segfault at 0000000000000122 rip 0000000000414a78 rsp 00007ffffffff570 error 4
xfs_db[26797]: segfault at 0000000000000122 rip 0000000000414a78 rsp 00007ffffffff540 error 4
end_request: I/O error, dev fd0, sector 0
end_request: I/O error, dev fd0, sector 0
end_request: I/O error, dev fd0, sector 0
end_request: I/O error, dev fd0, sector 0
subfs: unsuccessful attempt to mount media (256)
cdrom: open failed.
cdrom: open failed.
Ausgabe "lsmod"
Module Size Used by
hfsplus 68360 0
raid5 25472 0
xor 7696 1 raid5
vfat 17152 0
fat 44976 1 vfat
parport_pc 45800 1
lp 14792 0
parport 45580 2 parport_pc,lp
subfs 11264 1
cpufreq_userspace 9056 2
usbserial 36080 0
usbcore 136816 1 usbserial
powernow_k8 12736 1
freq_table 6720 1 powernow_k8
thermal 18700 0
processor 29512 2 powernow_k8,thermal
fan 6792 0
button 9632 0
battery 13192 0
ac 7432 0
floppy 68688 0
ipv6 299264 80
af_packet 27788 2
edd 13216 0
evdev 14208 0
joydev 13568 0
st 44452 0
sr_mod 20772 0
sg 45624 0
video1394 21880 0
ohci1394 37124 1 video1394
raw1394 31000 0
ieee1394 120952 3 video1394,ohci1394,raw1394
capability 5480 0
tg3 91908 0
i2c_amd8111 8192 0
i2c_amd756 8452 0
i2c_core 27776 2 i2c_amd8111,i2c_amd756
dm_mod 68800 0
ext3 152080 2
jbd 77896 1 ext3
ide_cd 45344 0
cdrom 41896 2 sr_mod,ide_cd
ide_disk 20224 0
amd74xx 15152 0 [permanent]
ide_core 158372 3 ide_cd,ide_disk,amd74xx
sata_sil 11524 3
libata 59784 1 sata_sil
sd_mod 21376 4
scsi_mod 156752 5 st,sr_mod,sg,libata,sd_mod
Erst mal SORRY wegen dem SPAM.
Da ich nicht allzuviel Erfahrung mit Linux habe fällt mir daran nichts verdächtiges auf. Und ich kann auch nicht sagen, warum die Platten (die SCSI-Platten sein sollten) nicht gefunden werden.
Findet ihr etwas?
Schon mal Danke für eure Hilfe
raf
hier mal eine ungewöhnliche Situation.
Ein Server, auf den ich nur via SSH zugreifen kann besitzt mehrere Platten. Auf einer ist das System, was auch problemlos startet. Allerdings finde weis ich nicht wo die anderen 4 Platten versteckt sind. Ich vermute, dass diese an einem Controller hängen, der nicht richtig geladen wird:
Hier mal ein paar Daten:
Ausgabe "dmesg"
Bootdata ok (command line is root=/dev/sda1 vga=0x314 selinux=0 splash=silent console=tty0 resume=/dev/sda2)
Linux version 2.6.11.4-20a-smp (geeko@buildhost) (gcc version 3.3.5 20050117 (prerelease) (SUSE Linux)) #1 SMP Wed Mar 23 21:52:37 UTC 2005
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009c400 (usable)
BIOS-e820: 000000000009c400 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000f7ff0000 (usable)
BIOS-e820: 00000000f7ff0000 - 00000000f7fff000 (ACPI data)
BIOS-e820: 00000000f7fff000 - 00000000f8000000 (ACPI NVS)
BIOS-e820: 00000000ff780000 - 0000000100000000 (reserved)
ACPI: RSDP (v002 ACPIAM ) @ 0x00000000000f6d70
ACPI: XSDT (v001 A M I OEMXSDT 0x03000620 MSFT 0x00000097) @ 0x00000000f7ff0100
ACPI: FADT (v001 A M I OEMFACP 0x03000620 MSFT 0x00000097) @ 0x00000000f7ff0281
ACPI: MADT (v001 A M I OEMAPIC 0x03000620 MSFT 0x00000097) @ 0x00000000f7ff0380
ACPI: OEMB (v001 A M I OEMBIOS 0x03000620 MSFT 0x00000097) @ 0x00000000f7fff040
ACPI: SRAT (v001 A M I OEMSRAT 0x03000620 MSFT 0x00000097) @ 0x00000000f7ff3b60
ACPI: HPET (v001 A M I OEMHPET 0x03000620 MSFT 0x00000097) @ 0x00000000f7ff3c70
ACPI: ASF! (v001 AMIASF AMDSTRET 0x00000001 INTL 0x02002026) @ 0x00000000f7ff3cb0
ACPI: DSDT (v001 0AAAA 0AAAA000 0x00000000 INTL 0x02002026) @ 0x0000000000000000
SRAT: PXM 0 -> APIC 0 -> Node 0
SRAT: PXM 1 -> APIC 1 -> Node 1
SRAT: Node 0 PXM 0 100000-7fffffff
SRAT: Node 1 PXM 1 80000000-f7ffffff
SRAT: Node 1 PXM 1 80000000-ffffffff
SRAT: Node 0 PXM 0 0-7fffffff
node 1 shift 24 addr ff000000 conflict 0
Bootmem setup node 0 0000000000000000-000000007fffffff
Bootmem setup node 1 0000000080000000-00000000f7feffff
On node 0 totalpages: 524287
DMA zone: 4096 pages, LIFO batch:1
Normal zone: 520191 pages, LIFO batch:16
HighMem zone: 0 pages, LIFO batch:1
On node 1 totalpages: 491503
DMA zone: 0 pages, LIFO batch:1
Normal zone: 491503 pages, LIFO batch:16
HighMem zone: 0 pages, LIFO batch:1
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Processor #0 15:5 APIC version 16
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
Processor #1 15:5 APIC version 16
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x03] address[0xfebff000] gsi_base[24])
IOAPIC[1]: apic_id 3, version 17, address 0xfebff000, GSI 24-27
ACPI: IOAPIC (id[0x04] address[0xfebfe000] gsi_base[28])
IOAPIC[2]: apic_id 4, version 17, address 0xfebfe000, GSI 28-31
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Setting APIC routing to flat
ACPI: HPET id: 0x102282a0 base: 0xfec01000
Using ACPI (MADT) for SMP configuration information
Checking aperture...
CPU 0: aperture @ f8000000 size 64 MB
CPU 1: aperture @ f8000000 size 64 MB
Built 2 zonelists
Kernel command line: root=/dev/sda1 vga=0x314 selinux=0 splash=silent console=tty0 resume=/dev/sda2
bootsplash: silent mode.
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 131072 bytes)
time.c: Using 14.318180 MHz HPET timer.
time.c: Detected 2191.621 MHz processor.
Console: colour dummy device 80x25
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Memory: 3993496k/4063168k available (2280k kernel code, 0k reserved, 1179k data, 212k init)
Calibrating delay loop... 4325.37 BogoMIPS (lpj=2162688)
Security Framework v1.0.0 initialized
SELinux: Disabled at boot.
Mount-cache hash table entries: 256 (order: 0, 4096 bytes)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
CPU 0(1) -> Node 0
checking if image is initramfs... it is
ACPI: Looking for DSDT in initrd... not found!
not found!
Using local APIC NMI watchdog using perfctr0
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
CPU 0(1) -> Node 0
CPU0: AMD Opteron(tm) Processor 248 stepping 0a
per-CPU timeslice cutoff: 1024.16 usecs.
task migration cache decay timeout: 2 msecs.
Booting processor 1/1 rip 6000 rsp ffff810082187f58
Initializing CPU#1
Calibrating delay loop... 4374.52 BogoMIPS (lpj=2187264)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
CPU 1(1) -> Node 1
AMD Opteron(tm) Processor 248 stepping 0a
Total of 2 processors activated (8699.90 BogoMIPS).
Using local APIC timer interrupts.
Detected 12.452 MHz APIC timer.
checking TSC synchronization across 2 CPUs: passed.
time.c: Using HPET based timekeeping.
Brought up 2 CPUs
NET: Registered protocol family 16
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20050211
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.GOLA._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.GOLB._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
TC classifier action (bugs to netdev@oss.sgi.com cc hadi@cyberus.ca)
hpet0: at MMIO 0xfec01000, IRQs 2, 8, 0
hpet0: 69ns tick, 3 32-bit timers
PCI-DMA: Disabling IOMMU.
IA32 emulation $Id: sys_ia32.c,v 1.32 2002/03/24 13:02:28 ak Exp $
audit: initializing netlink socket (disabled)
audit(1154363126.408:0): initialized
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
Initializing Cryptographic API
vesafb: framebuffer at 0xfd000000, mapped to 0xffffc20000080000, using 3750k, total 8128k
vesafb: mode is 800x600x16, linelength=1600, pages=7
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
bootsplash 3.1.6-2004/03/31: looking for picture...<6> silentjpeg size 39926 bytes,<6>...found (800x600, 25182 bytes, v3).
Console: switching to colour frame buffer device 99x34
fb0: VESA VGA frame buffer device
Real Time Clock Driver v1.12
hpet_acpi_add: no address or irqs in _CRS
Non-volatile memory driver v1.2
Linux agpgart interface v0.100 (c) Dave Jones
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing disabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
RAMDISK driver initialized: 16 RAM disks of 128000K size 1024 blocksize
loop: loaded (max 8 devices)
mice: PS/2 mouse device common for all mice
input: PC Speaker
md: md driver 0.90.1 MAX_MD_DEVS=256, MD_SB_DISKS=27
NET: Registered protocol family 2
IP: routing cache hash table of 16384 buckets, 256Kbytes
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
NET: Registered protocol family 1
ACPI wakeup devices:
PCI1 USB0 USB1 MBE0 PS2K PS2M UAR1 UAR2 GOLA GLAN GOLB SMBC AC97 MODM PWRB
ACPI: (supports S0 S1 S4 S5)
Freeing unused kernel memory: 212k freed
input: AT Translated Set 2 keyboard on isa0060/serio0
SCSI subsystem initialized
libata version 1.10 loaded.
sata_sil version 0.8
ACPI: PCI interrupt 0000:03:05.0[A] -> GSI 19 (level, low) -> IRQ 169
ata1: SATA max UDMA/100 cmd 0xFFFFC20000006C80 ctl 0xFFFFC20000006C8A bmdma 0xFFFFC20000006C00 irq 169
input: ImPS/2 Generic Wheel Mouse on isa0060/serio1
ata2: SATA max UDMA/100 cmd 0xFFFFC20000006CC0 ctl 0xFFFFC20000006CCA bmdma 0xFFFFC20000006C08 irq 169
ata3: SATA max UDMA/100 cmd 0xFFFFC20000006E80 ctl 0xFFFFC20000006E8A bmdma 0xFFFFC20000006E00 irq 169
ata4: SATA max UDMA/100 cmd 0xFFFFC20000006EC0 ctl 0xFFFFC20000006ECA bmdma 0xFFFFC20000006E08 irq 169
ata1: dev 0 cfg 49:2f00 82:346b 83:7d01 84:4023 85:3469 86:3c01 87:4023 88:407f
ata1: dev 0 ATA-7, max UDMA/133, 488397168 sectors: LBA48
ata1: dev 0 configured for UDMA/100
scsi0 : sata_sil
ata2: no device found (phy stat 00000000)
scsi1 : sata_sil
ata3: no device found (phy stat 00000000)
scsi2 : sata_sil
ata4: no device found (phy stat 00000000)
scsi3 : sata_sil
Vendor: ATA Model: ST3250823AS Rev: 3.03
Type: Direct-Access ANSI SCSI revision: 05
SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB)
SCSI device sda: drive cache: write back
SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB)
SCSI device sda: drive cache: write back
sda: sda1 sda2 sda3
Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
AMD8111: IDE controller at PCI slot 0000:00:07.1
AMD8111: chipset revision 3
AMD8111: not 100% native mode: will probe irqs later
AMD8111: 0000:00:07.1 (rev 03) UDMA133 controller
ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:pio, hdb:pio
ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:pio, hdd:DMA
Probing IDE interface ide0...
Probing IDE interface ide1...
hdd: LILITE-ON DVD SOHD-16P6P9S, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hdd: status error: status=0x58 { DriveReady SeekComplete DataRequest }
ide: failed opcode was: unknown
hdd: drive not ready for command
hdd: status timeout: status=0xd0 { Busy }
ide: failed opcode was: unknown
hdd: drive not ready for command
hdd: ATAPI reset complete
hdd: ATAPI 48X DVD-ROM drive, 254kB Cache
Uniform CD-ROM driver Revision: 3.20
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
bootsplash: status on console 0 changed to on
JBD: barrier-based sync failed on sda1 - disabling barriers
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
Adding 5245212k swap on /dev/sda2. Priority:42 extents:1
device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com
JBD: barrier-based sync failed on sda1 - disabling barriers
Losing some ticks... checking if CPU frequency changed.
parport0: PC-style at 0x378 [PCSPP]
lp0: using parport0 (polling).
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda3, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
tg3.c:v3.23 (February 15, 2005)
ACPI: PCI interrupt 0000:02:09.0[A] -> GSI 24 (level, low) -> IRQ 177
eth0: Tigon3 [partno(BCM95704A7) rev 2003 PHY(5704)] (PCIX:100MHz:64-bit) 10/100/1000BaseT Ethernet 00:e0:81:31:73:38
eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[1] TSOcap[1]
ACPI: PCI interrupt 0000:02:09.1[B] -> GSI 25 (level, low) -> IRQ 185
eth1: Tigon3 [partno(BCM95704A7) rev 2003 PHY(5704)] (PCIX:100MHz:64-bit) 10/100/1000BaseT Ethernet 00:e0:81:31:73:39
eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[1] TSOcap[1]
Capability LSM initialized
ieee1394: Initialized config rom entry `ip1394'
ieee1394: raw1394: /dev/raw1394 device initialized
video1394: Installed video1394 module
cdrom: open failed.
Attached scsi generic sg0 at scsi0, channel 0, id 0, lun 0, type 0
st: Version 20041025, fixed bufsize 32768, s/g segs 256
BIOS EDD facility v0.16 2004-Jun-25, 2 devices found
bootsplash: status on console 0 changed to on
NET: Registered protocol family 17
tg3: eth0: Link is up at 1000 Mbps, full duplex.
tg3: eth0: Flow control is off for TX and off for RX.
bootsplash: status on console 0 changed to on
NET: Registered protocol family 10
Disabled Privacy Extensions on device ffffffff80425c00(lo)
IPv6 over IPv4 tunneling driver
Disabled Privacy Extensions on device ffff81007d5d5800(sit0)
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
end_request: I/O error, dev fd0, sector 0
end_request: I/O error, dev fd0, sector 0
ACPI: Power Button (FF) [PWRF]
ACPI: Processor [CPU1] (supports 8 throttling states)
ACPI-0484: *** Warning: Error getting cpuindex for acpiid 0x3
ACPI-0484: *** Warning: Error getting cpuindex for acpiid 0x4
powernow-k8: Found 2 AMD Athlon 64 / Opteron processors (version 1.00.09e)
powernow-k8: 0 : fid 0xe (2200 MHz), vid 0x2 (1500 mV)
powernow-k8: 1 : fid 0xc (2000 MHz), vid 0x6 (1400 mV)
powernow-k8: 2 : fid 0xa (1800 MHz), vid 0x8 (1350 mV)
powernow-k8: 3 : fid 0x2 (1000 MHz), vid 0x8 (1350 mV)
cpu_init done, current fid 0xe, vid 0x2
powernow-k8: 0 : fid 0xe (2200 MHz), vid 0x2 (1500 mV)
powernow-k8: 1 : fid 0xc (2000 MHz), vid 0x6 (1400 mV)
powernow-k8: 2 : fid 0xa (1800 MHz), vid 0x8 (1350 mV)
powernow-k8: 3 : fid 0x2 (1000 MHz), vid 0x8 (1350 mV)
cpu_init done, current fid 0xe, vid 0x2
usbcore: registered new driver usbfs
usbcore: registered new driver hub
drivers/usb/serial/usb-serial.c: USB Serial support registered for Generic
usbcore: registered new driver usbserial_generic
usbcore: registered new driver usbserial
drivers/usb/serial/usb-serial.c: USB Serial Driver core v2.0
mtrr: 0xfd000000,0x800000 overlaps existing 0xfd000000,0x400000
mtrr: 0xfd000000,0x800000 overlaps existing 0xfd000000,0x400000
subfs 0.9
bootsplash: status on console 0 changed to on
eth0: no IPv6 routers present
cdrom: open failed.
cdrom: open failed.
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
powertweakd[7212]: segfault at 00002aaa00000000 rip 00002aaaab2d36a0 rsp 00007fffffffeb78 error 4
parport0: PC-style at 0x378 [PCSPP]
lp0: using parport0 (polling).
ppa: Version 2.07 (for Linux 2.4.x)
end_request: I/O error, dev fd0, sector 0
end_request: I/O error, dev fd0, sector 0
cdrom: open failed.
cdrom: open failed.
cdrom: open failed.
cdrom: open failed.
cdrom: open failed.
cdrom: open failed.
cdrom: open failed.
cdrom: open failed.
cdrom: open failed.
cdrom: open failed.
cdrom: open failed.
powertweakd[7782]: segfault at 00002aaa00000000 rip 00002aaaab2d36a0 rsp 00007fffffffeb78 error 4
JBD: barrier-based sync failed on sda3 - disabling barriers
xfs_db[23779]: segfault at 0000000000000122 rip 0000000000414a78 rsp 00007ffffffff510 error 4
xfs_db[23782]: segfault at 0000000000000122 rip 0000000000414a78 rsp 00007ffffffff510 error 4
xfs_db[23808]: segfault at 0000000000000122 rip 0000000000414a78 rsp 00007ffffffff510 error 4
xfs_db[23811]: segfault at 0000000000000122 rip 0000000000414a78 rsp 00007ffffffff510 error 4
xfs_db[23943]: segfault at 0000000000000122 rip 0000000000414a78 rsp 00007ffffffff570 error 4
xfs_db[23947]: segfault at 0000000000000122 rip 0000000000414a78 rsp 00007ffffffff570 error 4
xfs_db[23950]: segfault at 0000000000000122 rip 0000000000414a78 rsp 00007ffffffff570 error 4
xfs_db[23987]: segfault at 0000000000000122 rip 0000000000414a78 rsp 00007ffffffff540 error 4
xfs_db[23991]: segfault at 0000000000000122 rip 0000000000414a78 rsp 00007ffffffff540 error 4
xfs_db[23994]: segfault at 0000000000000122 rip 0000000000414a78 rsp 00007ffffffff540 error 4
xfs_db[24037]: segfault at 0000000000000122 rip 0000000000414a78 rsp 00007ffffffff520 error 4
xfs_db[24040]: segfault at 0000000000000122 rip 0000000000414a78 rsp 00007ffffffff520 error 4
xfs_db[24043]: segfault at 0000000000000122 rip 0000000000414a78 rsp 00007ffffffff520 error 4
xfs_db[24084]: segfault at 0000000000000122 rip 0000000000414a78 rsp 00007ffffffff530 error 4
xfs_db[24087]: segfault at 0000000000000122 rip 0000000000414a78 rsp 00007ffffffff530 error 4
xfs_db[24090]: segfault at 0000000000000122 rip 0000000000414a78 rsp 00007ffffffff530 error 4
xfs_db[24178]: segfault at 0000000000000122 rip 0000000000414a78 rsp 00007ffffffff570 error 4
xfs_db[24182]: segfault at 0000000000000122 rip 0000000000414a78 rsp 00007ffffffff570 error 4
xfs_db[24185]: segfault at 0000000000000122 rip 0000000000414a78 rsp 00007ffffffff570 error 4
end_request: I/O error, dev fd0, sector 0
cdrom: open failed.
xfs_db[25440]: segfault at 0000000000000122 rip 0000000000414a78 rsp 00007ffffffff530 error 4
xfs_db[25443]: segfault at 0000000000000122 rip 0000000000414a78 rsp 00007ffffffff530 error 4
xfs_db[25446]: segfault at 0000000000000122 rip 0000000000414a78 rsp 00007ffffffff530 error 4
xfs_db[25596]: segfault at 0000000000000122 rip 0000000000414a78 rsp 00007ffffffff570 error 4
xfs_db[25600]: segfault at 0000000000000122 rip 0000000000414a78 rsp 00007ffffffff570 error 4
xfs_db[25603]: segfault at 0000000000000122 rip 0000000000414a78 rsp 00007ffffffff570 error 4
raid5: automatically using best checksumming function: generic_sse
generic_sse: 3040.000 MB/sec
raid5: using function: generic_sse (3040.000 MB/sec)
md: raid5 personality registered as nr 4
xfs_db[25863]: segfault at 0000000000000122 rip 0000000000414a78 rsp 00007ffffffff510 error 4
xfs_db[25866]: segfault at 0000000000000122 rip 0000000000414a78 rsp 00007ffffffff510 error 4
xfs_db[25869]: segfault at 0000000000000122 rip 0000000000414a78 rsp 00007ffffffff510 error 4
xfs_db[25885]: segfault at 0000000000000122 rip 0000000000414a78 rsp 00007ffffffff570 error 4
xfs_db[25889]: segfault at 0000000000000122 rip 0000000000414a78 rsp 00007ffffffff570 error 4
xfs_db[25892]: segfault at 0000000000000122 rip 0000000000414a78 rsp 00007ffffffff570 error 4
FAT: unable to read boot sector
xfs_db[26772]: segfault at 0000000000000122 rip 0000000000414a78 rsp 00007ffffffff570 error 4
xfs_db[26776]: segfault at 0000000000000122 rip 0000000000414a78 rsp 00007ffffffff570 error 4
xfs_db[26779]: segfault at 0000000000000122 rip 0000000000414a78 rsp 00007ffffffff570 error 4
xfs_db[26797]: segfault at 0000000000000122 rip 0000000000414a78 rsp 00007ffffffff540 error 4
end_request: I/O error, dev fd0, sector 0
end_request: I/O error, dev fd0, sector 0
end_request: I/O error, dev fd0, sector 0
end_request: I/O error, dev fd0, sector 0
subfs: unsuccessful attempt to mount media (256)
cdrom: open failed.
cdrom: open failed.
Ausgabe "lsmod"
Module Size Used by
hfsplus 68360 0
raid5 25472 0
xor 7696 1 raid5
vfat 17152 0
fat 44976 1 vfat
parport_pc 45800 1
lp 14792 0
parport 45580 2 parport_pc,lp
subfs 11264 1
cpufreq_userspace 9056 2
usbserial 36080 0
usbcore 136816 1 usbserial
powernow_k8 12736 1
freq_table 6720 1 powernow_k8
thermal 18700 0
processor 29512 2 powernow_k8,thermal
fan 6792 0
button 9632 0
battery 13192 0
ac 7432 0
floppy 68688 0
ipv6 299264 80
af_packet 27788 2
edd 13216 0
evdev 14208 0
joydev 13568 0
st 44452 0
sr_mod 20772 0
sg 45624 0
video1394 21880 0
ohci1394 37124 1 video1394
raw1394 31000 0
ieee1394 120952 3 video1394,ohci1394,raw1394
capability 5480 0
tg3 91908 0
i2c_amd8111 8192 0
i2c_amd756 8452 0
i2c_core 27776 2 i2c_amd8111,i2c_amd756
dm_mod 68800 0
ext3 152080 2
jbd 77896 1 ext3
ide_cd 45344 0
cdrom 41896 2 sr_mod,ide_cd
ide_disk 20224 0
amd74xx 15152 0 [permanent]
ide_core 158372 3 ide_cd,ide_disk,amd74xx
sata_sil 11524 3
libata 59784 1 sata_sil
sd_mod 21376 4
scsi_mod 156752 5 st,sr_mod,sg,libata,sd_mod
Erst mal SORRY wegen dem SPAM.
Da ich nicht allzuviel Erfahrung mit Linux habe fällt mir daran nichts verdächtiges auf. Und ich kann auch nicht sagen, warum die Platten (die SCSI-Platten sein sollten) nicht gefunden werden.
Findet ihr etwas?
Schon mal Danke für eure Hilfe
raf