u3xn5
20.07.06, 03:19
Hallo,
Ich habe zwei Bildschirme (Notebook 15,4" Bildschirm & Externer 19" LCD) jeweils mit der Nativen Auflösung im Clone Modus im betrieb.
Nun stelle ich fest, das sich mit meiner TwinView xorg-Konfiguration keine Windows Anwendungen emulieren lassen. Dies macht sich ersichtlich weil die Anwendungen (Auser Steam) nicht starten.
Mit meiner standart xorg funktionieren diese jedoch.
Ich Frage mich, ob das normal so ist, ich denke eher nicht, da ich diese xorg selbst geconft habe und da schon mal ein fehler passieren kann.
Was auch aufällig an meiner TwinView xorg ist, ist der folgende "Error" wenn ich eine Anwendung starte (Nativ):
X Error: BadDevice, invalid or uninitialized input device 157
Major opcode: 146
Minor opcode: 3
Resource id: 0x0
Failed to open device
X Error: BadDevice, invalid or uninitialized input device 157
Major opcode: 146
Minor opcode: 3
Resource id: 0x0
Failed to open device
Die erhalte ich wie schon erwähnt nur mit meiner TwinView Xorg, die so aussieht:
# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "Files"
FontPath "/usr/share/X11/fonts/misc"
FontPath "/usr/share/X11/fonts/cyrillic"
FontPath "/usr/share/X11/fonts/100dpi/:unscaled"
FontPath "/usr/share/X11/fonts/75dpi/:unscaled"
FontPath "/usr/share/X11/fonts/Type1"
FontPath "/usr/share/X11/fonts/100dpi"
FontPath "/usr/share/X11/fonts/75dpi"
# path to defoma fonts
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection
Section "Module"
Load "i2c"
Load "bitmap"
Load "ddc"
#Load "dri"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "type1"
Load "vbe"
#Load "GLcore"
#Load "dbe" #nvidia-new
#Load "extmod" #nvidia-new
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "ch"
Option "XkbVariant" "de"
# Option "SHMConfig" "on"
#Option "SHMConfig" "1"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ExplorerPS/2"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "true"
EndSection
Section "InputDevice"
Identifier "Synaptics Touchpad"
Driver "synaptics"
Option "SendCoreEvents" "true"
Option "Device" "/dev/psaux"
Option "Protocol" "auto-dev"
Option "HorizScrollDelta" "0"
Option "SHMConfig" "on"
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "stylus"
Option "Device" "/dev/wacom" # Change to
# /dev/input/event
# for USB
Option "Type" "stylus"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "eraser"
Option "Device" "/dev/wacom" # Change to
# /dev/input/event
# for USB
Option "Type" "eraser"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "cursor"
Option "Device" "/dev/wacom" # Change to
# /dev/input/event
# for USB
Option "Type" "cursor"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "Device"
Identifier "NVIDIA Corporation NV40M? [GeForce Go 6200]"
Driver "nvidia"
BusID "PCI:3:0:0"
Option "RenderAccel" "True"
Screen 0
Option "TVOverScan" "1.0"
Option "TwinView" "true"
Option "TwinViewOrientation" "clone"
Option "SecondMonitorHorizSync" "30.0 - 115.0"
Option "SecondMonitorVertRefresh" "50-180"
Option "MetaModes" "1280x1024,1280x800"
#Option "RenderAccel" "1"
EndSection
Section "Monitor"
Identifier "Standardbildschirm"
Option "DPMS"
# HorizSync 28-64
# VertRefresh 43-60
#Laut Systetings:
HorizSync 28.0-33.0
VertRefresh 43-72
EndSection
Section "Monitor"
Identifier "external"
#HorizSync 30-50
#VertRefresh 60
HorizSync 30-82
VertRefresh 56-76
Option "DPMS"
EndSection
#Section "Screen"
# Identifier "Default Screen"
# Device "NVIDIA Corporation NV40M? [GeForce Go 6200]"
# Monitor "Standardbildschirm"
# DefaultDepth 24
# SubSection "Display"
# Depth 1
# #Depth 24
# Modes "1280x800" "1024x768"
# EndSubSection
# SubSection "Display"
# Depth 4
# Modes "1280x800" "1024x768"
# EndSubSection
# SubSection "Display"
# Depth 8
# Modes "1280x800" "1024x768"
# EndSubSection
# SubSection "Display"
# Depth 15
# Modes "1280x800" "1024x768"
# EndSubSection
# SubSection "Display"
# Depth 16
# Modes "1280x800" "1024x768"
# EndSubSection
# SubSection "Display"
# Depth 24
# Modes "1280x800" "1024x768"
# EndSubSection
#EndSection
Section "Screen"
# VertRefresh 43-72
Identifier "Standardbildschirm"
Device "NVIDIA Corporation NV40M? [GeForce GO 6200]"
Monitor "external"
DefaultDepth 24
Subsection "Display"
Depth 24
Modes "800x600" "1024x768" "1280x800" "1280x1024"
ViewPort 0 0
EndSubsection
EndSection
Section "ServerLayout"
Identifier "Default Layout"
Screen 0 "Standardbildschirm"
#Screen "Screen0"
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
InputDevice "stylus" "SendCoreEvents"
InputDevice "cursor" "SendCoreEvents"
InputDevice "eraser" "SendCoreEvents"
InputDevice "Synaptics Touchpad"
EndSection
Section "DRI"
Mode 0666
EndSection
Section "Extensions"
Option "Composite" "Enable"
EndSection
(Ja ich weiss, eine sehr unübersichtliche xorg ;))
Eventuell weis ja jemand von euch ob es an meiner Xorg.conf liegt oder an wine/x.
Vielen dank fürs Lesen.
Ich habe zwei Bildschirme (Notebook 15,4" Bildschirm & Externer 19" LCD) jeweils mit der Nativen Auflösung im Clone Modus im betrieb.
Nun stelle ich fest, das sich mit meiner TwinView xorg-Konfiguration keine Windows Anwendungen emulieren lassen. Dies macht sich ersichtlich weil die Anwendungen (Auser Steam) nicht starten.
Mit meiner standart xorg funktionieren diese jedoch.
Ich Frage mich, ob das normal so ist, ich denke eher nicht, da ich diese xorg selbst geconft habe und da schon mal ein fehler passieren kann.
Was auch aufällig an meiner TwinView xorg ist, ist der folgende "Error" wenn ich eine Anwendung starte (Nativ):
X Error: BadDevice, invalid or uninitialized input device 157
Major opcode: 146
Minor opcode: 3
Resource id: 0x0
Failed to open device
X Error: BadDevice, invalid or uninitialized input device 157
Major opcode: 146
Minor opcode: 3
Resource id: 0x0
Failed to open device
Die erhalte ich wie schon erwähnt nur mit meiner TwinView Xorg, die so aussieht:
# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "Files"
FontPath "/usr/share/X11/fonts/misc"
FontPath "/usr/share/X11/fonts/cyrillic"
FontPath "/usr/share/X11/fonts/100dpi/:unscaled"
FontPath "/usr/share/X11/fonts/75dpi/:unscaled"
FontPath "/usr/share/X11/fonts/Type1"
FontPath "/usr/share/X11/fonts/100dpi"
FontPath "/usr/share/X11/fonts/75dpi"
# path to defoma fonts
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection
Section "Module"
Load "i2c"
Load "bitmap"
Load "ddc"
#Load "dri"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "type1"
Load "vbe"
#Load "GLcore"
#Load "dbe" #nvidia-new
#Load "extmod" #nvidia-new
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "ch"
Option "XkbVariant" "de"
# Option "SHMConfig" "on"
#Option "SHMConfig" "1"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ExplorerPS/2"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "true"
EndSection
Section "InputDevice"
Identifier "Synaptics Touchpad"
Driver "synaptics"
Option "SendCoreEvents" "true"
Option "Device" "/dev/psaux"
Option "Protocol" "auto-dev"
Option "HorizScrollDelta" "0"
Option "SHMConfig" "on"
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "stylus"
Option "Device" "/dev/wacom" # Change to
# /dev/input/event
# for USB
Option "Type" "stylus"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "eraser"
Option "Device" "/dev/wacom" # Change to
# /dev/input/event
# for USB
Option "Type" "eraser"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "cursor"
Option "Device" "/dev/wacom" # Change to
# /dev/input/event
# for USB
Option "Type" "cursor"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "Device"
Identifier "NVIDIA Corporation NV40M? [GeForce Go 6200]"
Driver "nvidia"
BusID "PCI:3:0:0"
Option "RenderAccel" "True"
Screen 0
Option "TVOverScan" "1.0"
Option "TwinView" "true"
Option "TwinViewOrientation" "clone"
Option "SecondMonitorHorizSync" "30.0 - 115.0"
Option "SecondMonitorVertRefresh" "50-180"
Option "MetaModes" "1280x1024,1280x800"
#Option "RenderAccel" "1"
EndSection
Section "Monitor"
Identifier "Standardbildschirm"
Option "DPMS"
# HorizSync 28-64
# VertRefresh 43-60
#Laut Systetings:
HorizSync 28.0-33.0
VertRefresh 43-72
EndSection
Section "Monitor"
Identifier "external"
#HorizSync 30-50
#VertRefresh 60
HorizSync 30-82
VertRefresh 56-76
Option "DPMS"
EndSection
#Section "Screen"
# Identifier "Default Screen"
# Device "NVIDIA Corporation NV40M? [GeForce Go 6200]"
# Monitor "Standardbildschirm"
# DefaultDepth 24
# SubSection "Display"
# Depth 1
# #Depth 24
# Modes "1280x800" "1024x768"
# EndSubSection
# SubSection "Display"
# Depth 4
# Modes "1280x800" "1024x768"
# EndSubSection
# SubSection "Display"
# Depth 8
# Modes "1280x800" "1024x768"
# EndSubSection
# SubSection "Display"
# Depth 15
# Modes "1280x800" "1024x768"
# EndSubSection
# SubSection "Display"
# Depth 16
# Modes "1280x800" "1024x768"
# EndSubSection
# SubSection "Display"
# Depth 24
# Modes "1280x800" "1024x768"
# EndSubSection
#EndSection
Section "Screen"
# VertRefresh 43-72
Identifier "Standardbildschirm"
Device "NVIDIA Corporation NV40M? [GeForce GO 6200]"
Monitor "external"
DefaultDepth 24
Subsection "Display"
Depth 24
Modes "800x600" "1024x768" "1280x800" "1280x1024"
ViewPort 0 0
EndSubsection
EndSection
Section "ServerLayout"
Identifier "Default Layout"
Screen 0 "Standardbildschirm"
#Screen "Screen0"
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
InputDevice "stylus" "SendCoreEvents"
InputDevice "cursor" "SendCoreEvents"
InputDevice "eraser" "SendCoreEvents"
InputDevice "Synaptics Touchpad"
EndSection
Section "DRI"
Mode 0666
EndSection
Section "Extensions"
Option "Composite" "Enable"
EndSection
(Ja ich weiss, eine sehr unübersichtliche xorg ;))
Eventuell weis ja jemand von euch ob es an meiner Xorg.conf liegt oder an wine/x.
Vielen dank fürs Lesen.