PDA

Archiv verlassen und diese Seite im Standarddesign anzeigen : Kubuntu@ ASUS A6VC: Externer Bildschrim Geht nicht



u3xn5
17.05.06, 16:11
Guten Tag,
Wie oben schon beschrieben geht mein Externer Bildschirm nicht, bzw X bootet mit dem angeschlossenen Screen nicht. Ich denke bei einem Beamer wird es auch nicht gehen, den ich benötige den Notebook für verschiedne Präsentationen.
TV Out geht jedoch Problemlos (TV Anschluss).

Hier meine xorg.conf:




# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg

Section "Files"
FontPath "/usr/share/X11/fonts/misc"
FontPath "/usr/share/X11/fonts/cyrillic"
FontPath "/usr/share/X11/fonts/100dpi/:unscaled"
FontPath "/usr/share/X11/fonts/75dpi/:unscaled"
FontPath "/usr/share/X11/fonts/Type1"
FontPath "/usr/share/X11/fonts/CID"
FontPath "/usr/share/X11/fonts/100dpi"
FontPath "/usr/share/X11/fonts/75dpi"
# paths to defoma fonts
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/CID"
EndSection

Section "Module"
# Load "GLcore"
Load "i2c"
Load "bitmap"
Load "ddc"
# Load "dri"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "type1"
Load "vbe"
EndSection

Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "ch"
Option "XkbVariant" "de"
EndSection

Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ImPS/2"
Option "Emulate3Buttons" "true"
Option "ZAxisMapping" "4 5"
EndSection

Section "InputDevice"
Identifier "Synaptics Touchpad"
Driver "synaptics"
Option "SendCoreEvents" "true"
Option "Device" "/dev/psaux"
Option "Protocol" "auto-dev"
Option "HorizScrollDelta" "0"
EndSection

Section "Device"
Identifier "NVIDIA Corporation NV40M? [GeForce Go 6200]"
Driver "nvidia"
BusID "PCI:3:0:0"
Option "RenderAccel" "True"

# Option "ModeValidation" "NoMaxPClkCheck" #new
# Option "MonitorLayout" "CRT,LFP" #new
# Option "Clone" "true" #new
# Option "ForceCRT1" "true"
# Option "ForceCRT1Type" "VGA
# Option "ForceOption" "ForceCRT2Type "NONE"

EndSection

Section "Monitor"
Identifier "Standardbildschirm"
Option "DPMS"
HorizSync 28-64
VertRefresh 43-60
Modeline "1280x800@60" 83.91 1280 1312 1624 1656 800 816 824 841
EndSection

#new
Section "Monitor"
Identifier "DFP-0"
HorizSync 28-64
VertRefresh 43-60
Option "DPMS"
# Option "ForceCRT1" "true"
# Option "ForceCRT1Type "VGA"
# Option "ForceOption" "ForceCRT2Type" "NONE"
EndSection
#/new

Section "Screen"
Identifier "Default Screen"
Device "NVIDIA Corporation NV40M? [GeForce Go 6200]"
Monitor "Standardbildschirm"
DefaultDepth 24
SubSection "Display"
Depth 1
Modes "1280x800"
EndSubSection
SubSection "Display"
Depth 4
Modes "1280x800"
EndSubSection
SubSection "Display"
Depth 8
Modes "1280x800"
EndSubSection
SubSection "Display"
Depth 15
Modes "1280x800"
EndSubSection
SubSection "Display"
Depth 16
Modes "1280x800" "1280x1024" "1024x768" "800x600" "640x480"/onlyInternalscreen/
EndSubSection
SubSection "Display"
Depth 24
Modes "1280x800" "1280x1024" "1024x768" "800x600" "640x480" "640x400" "640x384" "512x384" "400x300" "320x240"
EndSubSection
EndSection

#new
Section "Screen"
Identifier "DFP-0"
Device "NVIDIA Corporation NV40M? [GeForce Go 6200]"
Monitor "DFP-0"
DefaultDepth 16
SubSection "Display"
Depth 16
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
EndSection
#/new

Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen"
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
InputDevice "Synaptics Touchpad"
EndSection

Section "DRI"
Mode 0666
EndSection

#Section "Extensions"
# Option "Composite" "Enable"
#EndSection


Im Anhang befinden sich noch die xorg logs.

Mattes_01
18.05.06, 09:01
Alsom bei mir ging der externe screen auch nit, bzw zeigte nix an, allerdings bootete der rechner, wenn ich das bei dir richtig verstehe bootet der ja überhaupt nicht weiter.

falls doch versuch mal mit STRG und ALT und +oder- (+- vom Numpad) die verschiedenen auflösungen durchzuschalten, hat bei mir geklappt, auf einmal ging der an.,

richtige bildschirmauflös. beim tft muss natürlich in der xorg drin stehen.

gruss

u3xn5
18.05.06, 10:59
ja, X bootet gar nicht, wenn ich etwas am VGA bzw DVI port angeschlossen habe.
im log steht no screens found.. :confused:
Kann das am Kernel liegen (2.6.12-10-686)?