Hallo @ all!
Ich nutze opensuse 10.0 und habe xp mit vmware am laufen.
Da dachte ich mir rüste mal den RAM auf 1024.
Gesagt getan.
Ich habe mir nochmal einen 512 MB Riegel gekauft baugleich.
Infineon 512MB DDR PC3200.
Das booten lief gut Speicher erkannt nur mein WLAN USB Adapter
den ich mit ndiswrapper am laufen habe wird nicht mehr erkannt.
(Hersteller:Corega).
Da dachte ich ruf mal YAST auf und konfiguriere die Netzerkkarte neu.
Siehe da der Dialog Netzerkkarte einrichten friert ein.
Na da wollte ich den Rechner runterfahren aber nix geht.Netzstecker
gezogen.Den alten RAM ausgebaut und nur den neuen drin gelassen
und alles läuft aber nur mit 512 MB.
Hat da jemand einen Tipp für mich?
Danke
df
Hat da jemand einen Tipp für mich?
Ja, da es sich wohl um ein Hardwareproblem handelt (zB Unverträglichkeit MoBo - RAM) wäre es interessant zu erfahren um welche Hardware es sich handelt.
Vertausch testweise mal die beiden RAM Riegel, das hat bei mir schonmal geholfen.
Hallo!
ja die Hardware:
MB: Elitegroup 741 GX-M
Speicher:2*512 MB Infinion DDR PC3200 Cl2.5
GRAKA:Nvidia MX440SE
TV:Skystar2
WLAN:Siemens SE515 Corega USB Adapter WLUSB26T
Also mit XP scheint alles zu laufen.Daher denke ich das der Speicher in Ordnung ist.
Gruß
df
Dass es unter XP läuft sagt überhaupt nix. Probier mal memtest86.
MB: Elitegroup 741 GX-M
das ist dein problem, die mainboards taugen nichts. daher kann es sehr gut sein das die probleme daher kommen.
Hallo!
Also memtest lief ohne errors.
Ich habe im BIOS LAN on Board disabled.
Dann konnte ich YAST wenigstens wieder aufrufen und die
Netzwerkkartenkonfiguration auswählen.
Ich habe dort alle Einstellungen gelöscht und alles wieder
neu eingerichtet.
Die Power Led am WLAN Corega leuchtet auch aber nicht die
Link Lampe.
Wenn das Board defekt sein sollte dann dürfte WLAN
doch auch nicht mit XP laufen.Oder sehe ich da was falsch?
Gruß
df
Da siehst du was falsch, windows läuft öfters mal mit kaputter hardware. Wie lang und wie gut ist immer anders.
Hallo!
Ich glaube ich habe was gefunden.Ich weis aber nicht wie ich jetzt
weitermachen soll.
Mar 24 16:37:15 linux kernel: ndiswrapper (usb_submit_nt_urb:610): usb_get_descriptor() = -110
Mar 24 16:37:15 linux kernel: ndiswrapper (ndiswrapper_add_usb_device:363): Windows driver couldn't initialize the device (C0000001)
Mar 24 16:37:15 linux kernel: ndiswrapper: probe of 3-1:1.0 failed with error -22
Das passiert nur wenn ich den zweiten Riegel einsetze.
Gruß
df
Hallo !
Hier mal mein boot.msg
Inspecting /boot/System.map-2.6.13-15.8-default
Loaded 24247 symbols from /boot/System.map-2.6.13-15.8-default.
Symbols match kernel version 2.6.13.
No module symbols loaded - kernel modules not enabled.
klogd 1.4.1, log source = ksyslog started.
<5>Linux version 2.6.13-15.8-default (geeko@buildhost) (gcc version 4.0.2 20050901 (prerelease) (SUSE Linux)) #1 Tue Feb 7 11:07:24 UTC 2006
<6>BIOS-provided physical RAM map:
<4> BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
<4> BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
<4> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
<4> BIOS-e820: 0000000000100000 - 000000003fff0000 (usable)
<4> BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS)
<4> BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data)
<4> BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
<4> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
<4> BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
<5>127MB HIGHMEM available.
<5>896MB LOWMEM available.
<6>found SMP MP-table at 000f5700
<7>On node 0 totalpages: 262128
<7> DMA zone: 4096 pages, LIFO batch:1
<7> Normal zone: 225280 pages, LIFO batch:31
<7> HighMem zone: 32752 pages, LIFO batch:15
<6>DMI 2.2 present.
<7>ACPI: RSDP (v000 AWARD ) @ 0x000f70f0
<7>ACPI: RSDT (v001 AWARD AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3fff3000
<7>ACPI: FADT (v001 AWARD AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3fff3040
<7>ACPI: MADT (v001 AWARD AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3fff6a40
<7>ACPI: DSDT (v001 AWARD AWRDACPI 0x00001000 MSFT 0x0100000e) @ 0x00000000
<6>ACPI: PM-Timer IO Port: 0x1008
<6>ACPI: local apic disabled
<6>Intel MultiProcessor Specification v1.4
<6> Virtual Wire compatibility mode.
<6>OEM ID: OEM00000 Product ID: PROD00000000 APIC at: 0xFEE00000
<4>Processor #0 6:8 APIC version 17
<6>I/O APIC #2 Version 17 at 0xFEC00000.
<6>Processors: 1
<4>Allocating PCI resources starting at 40000000 (gap: 40000000:bec00000)
<4>Built 1 zonelists
<5>Kernel command line: root=/dev/hda2 vga=0x317 selinux=0 resume=/dev/hda1 splash=silent
<6>bootsplash: silent mode.
<6>Initializing CPU#0
<4>PID hash table entries: 4096 (order: 12, 65536 bytes)
<4>Detected 1496.394 MHz processor.
<6>Using pmtmr for high-res timesource
<4>Console: colour dummy device 80x25
<4>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
<4>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
<6>Memory: 1033552k/1048512k available (2029k kernel code, 14116k reserved, 695k data, 204k init, 131008k highmem)
<4>Checking if this processor honours the WP bit even in supervisor mode... Ok.
<4>Calibrating delay using timer specific routine.. 2994.61 BogoMIPS (lpj=5989237)
<6>Security Framework v1.0.0 initialized
<6>SELinux: Disabled at boot.
<4>Mount-cache hash table entries: 512
<7>CPU: After generic identify, caps: 0383fbff c1cbfbff 00000000 00000000 00000000 00000000 00000000
<7>CPU: After vendor identify, caps: 0383fbff c1cbfbff 00000000 00000000 00000000 00000000 00000000
<6>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
<6>CPU: L2 Cache: 256K (64 bytes/line)
<7>CPU: After all inits, caps: 0383fbff c1cbfbff 00000000 00000020 00000000 00000000 00000000
<6>Intel machine check architecture supported.
<6>Intel machine check reporting enabled on CPU#0.
<6>mtrr: v2.0 (20020519)
<4>CPU: AMD Athlon(tm) stepping 01
<6>Enabling fast FPU save and restore... done.
<6>Enabling unmasked SIMD FPU exception support... done.
<6>Checking 'hlt' instruction... OK.
<6>checking if image is initramfs... it is
<6>Freeing initrd memory: 1724k freed
<6>ACPI: Looking for DSDT in initrd... not found!
<4> not found!
<4>ACPI: setting ELCR to 0200 (from 0e28)
<6>NET: Registered protocol family 16
<6>ACPI: bus type pci registered
<6>PCI: PCI BIOS revision 2.10 entry at 0xfb4e0, last bus=1
<6>ACPI: Subsystem revision 20050408
<6>ACPI: Interpreter enabled
<6>ACPI: Using PIC for interrupt routing
<6>ACPI: PCI Root Bridge [PCI0] (0000:00)
<4>PCI: Probing PCI hardware (bus 00)
<6>ACPI: Assume root bridge [\_SB_.PCI0] segment is 0
<6>ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
<6>PCI: Ignoring BAR0-3 of IDE controller 0000:00:02.5
<7>Boot video device is 0000:01:00.0
<7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
<4>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
<4>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
<4>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
<4>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
<4>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
<4>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
<4>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
<4>ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 6 7 9 10 11 12 14 15)
<6>Linux Plug and Play Support v0.97 (c) Adam Belay
<6>pnp: PnP ACPI init
<6>pnp: PnP ACPI: found 11 devices
<6>PCI: Using ACPI for IRQ routing
<6>PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
<4>TC classifier action (bugs to netdev@vger.kernel.org cc hadi@cyberus.ca)
<6>PCI: Bridge: 0000:00:01.0
<6> IO window: disabled.
<6> MEM window: e8000000-e9ffffff
<6> PREFETCH window: d8000000-e7ffffff
<6>apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
<5>apm: overridden by ACPI.
<6>audit: initializing netlink socket (disabled)
<4>audit(1143277902.420:1): initialized
<4>highmem bounce pool size: 64 pages
<4>Total HugeTLB memory allocated, 0
<5>VFS: Disk quotas dquot_6.5.1
<4>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
<6>Initializing Cryptographic API
<6>vesafb: framebuffer at 0xd8000000, mapped to 0xf8880000, using 6144k, total 65536k
<6>vesafb: mode is 1024x768x16, linelength=2048, pages=1
<6>vesafb: protected mode interface info at c000:f6d0
<6>vesafb: scrolling: redraw
<6>vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
<6>bootsplash 3.1.6-2004/03/31: looking for picture...<6> silentjpeg size 76011 bytes,<6>...found (1024x768, 12703 bytes, v3).
<4>Console: switching to colour frame buffer device 127x44
<6>fb0: VESA VGA frame buffer device
<6>isapnp: Scanning for PnP cards...
<6>isapnp: No Plug & Play device found
<6>Real Time Clock Driver v1.12
<6>PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
<6>serio: i8042 AUX port at 0x60,0x64 irq 12
<6>serio: i8042 KBD port at 0x60,0x64 irq 1
<6>Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing enabled
<4>ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
<4>ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
<6>io scheduler noop registered
<6>io scheduler anticipatory registered
<6>io scheduler deadline registered
<6>io scheduler cfq registered
<6>Floppy drive(s): fd0 is 1.44M
<6>FDC 0 is a post-1991 82077
<4>RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize
<6>loop: loaded (max 8 devices)
<6>mice: PS/2 mouse device common for all mice
<6>input: PC Speaker
<6>md: md driver 0.90.2 MAX_MD_DEVS=256, MD_SB_DISKS=27
<6>md: bitmap version 3.38
<6>NET: Registered protocol family 2
<6>input: AT Translated Set 2 keyboard on isa0060/serio0
<4>IP route cache hash table entries: 65536 (order: 6, 262144 bytes)
<4>TCP established hash table entries: 262144 (order: 9, 2097152 bytes)
<4>TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
<6>TCP: Hash tables configured (established 262144 bind 65536)
<6>TCP reno registered
<6>NET: Registered protocol family 1
<4>Using IPI Shortcut mode
<4>ACPI wakeup devices:
<4>FUTS PCI0 USB0 USB1 USB2 USB3 MAC0 AMR0 UAR1 PS2M PS2K
<6>ACPI: (supports S0 S1 S4 S5)
<6>Freeing unused kernel memory: 204k freed
<6>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
<6>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
<6>SIS5513: IDE controller at PCI slot 0000:00:02.5
<4> ACPI-0212: *** Warning: Device is not power manageable
<4>ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 5
<4>PCI: setting IRQ 5 as level-triggered
<6>ACPI: PCI Interrupt 0000:00:02.5[A] -> Link [LNKA] -> GSI 5 (level, low) -> IRQ 5
<6>SIS5513: chipset revision 1
<6>SIS5513: not 100% native mode: will probe irqs later
<6>SIS5513: SiS 962/963 MuTIOL IDE UDMA133 controller
<6> ide0: BM-DMA at 0x4000-0x4007, BIOS settings: hda:DMA, hdb:DMA
<6> ide1: BM-DMA at 0x4008-0x400f, BIOS settings: hdc:DMA, hdd:DMA
<7>Probing IDE interface ide0...
<4>hda: HDS722516VLAT20, ATA DISK drive
<6>input: ImPS/2 Generic Wheel Mouse on isa0060/serio1
<4>hdb: SAMSUNG SP1634N, ATA DISK drive
<4>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
<6>hda: max request size: 1024KiB
<6>hda: 321672960 sectors (164696 MB) w/1794KiB Cache, CHS=20023/255/63, UDMA(100)
<6>hda: cache flushes supported
<6> hda: hda1 hda2
<6>hdb: max request size: 1024KiB
<6>hdb: 312581808 sectors (160041 MB) w/8192KiB Cache, CHS=19457/255/63, UDMA(100)
<6>hdb: cache flushes supported
<6> hdb: hdb1 < hdb5 >
<7>Probing IDE interface ide1...
<4>hdc: ATAPI DVD-ROM 16XMax, ATAPI CD/DVD-ROM drive
<4>hdd: HL-DT-ST DVDRAM GSA-4120B, ATAPI CD/DVD-ROM drive
<4>ide1 at 0x170-0x177,0x376 on irq 15
<6>ACPI: CPU0 (power states: C1[C1])
<6>ACPI: Thermal Zone [THRM] (40 C)
<6>ACPI: Fan [FAN] (on)
<6>hdc: ATAPI 40X DVD-ROM drive, 512kB Cache, UDMA(33)
<6>Uniform CD-ROM driver Revision: 3.20
<6>hdd: ATAPI 40X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(33)
<4>Attempting manual resume
<3>swsusp: Suspend partition has wrong signature?
<5>ReiserFS: hda2: found reiserfs format "3.6" with standard journal
<5>ReiserFS: hda2: using ordered data mode
<5>ReiserFS: hda2: journal params: device hda2, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
<5>ReiserFS: hda2: checking transaction log (hda2)
<5>ReiserFS: hda2: Using r5 hash to sort names
<7>spurious 8259A interrupt: IRQ7.
<6>md: Autodetecting RAID arrays.
<6>md: autorun ...
<6>md: ... autorun DONE.
<6>device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com
<5>ReiserFS: hdb5: found reiserfs format "3.6" with standard journal
<5>ReiserFS: hdb5: using ordered data mode
<5>ReiserFS: hdb5: journal params: device hdb5, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
<5>ReiserFS: hdb5: checking transaction log (hdb5)
<5>ReiserFS: hdb5: Using r5 hash to sort names
Kernel logging (ksyslog) stopped.
Kernel log daemon terminating.
Boot logging started on /dev/tty1(/dev/console) at Sat Mar 25 10:12:03 2006
Configuring serial ports...
/dev/ttyS0 at 0x03f8 (irq = 4) is a 16550A
Configured serial ports
doneMounting shared memory FS on /dev/shmdone
Activating device mapper...
Creating /dev/mapper/control character device with major:10 minor:63.
done
Checking file systems...
fsck 1.38 (30-Jun-2005)
Reiserfs super block in block 16 on 0x345 of format 3.6 with standard journal
Blocks (total/free): 39070064/22148396 by 4096 bytes
Filesystem is clean
Replaying journal..
Reiserfs journal '/dev/hdb5' in blocks [18..8211]: 0 transactions replayed
Checking internal tree..finished
doneSetting up kernel module dependencies (if required)done
Mounting local file systems...
proc on /proc type proc (rw)
sysfs on /sys type sysfs (rw)
tmpfs on /dev/shm type tmpfs (rw)
devpts on /dev/pts type devpts (rw,mode=0620,gid=5)
/dev/hdb5 on /neueplatte type reiserfs (rw,noexec,nosuid,nodev,acl,user_xattr)
doneSetting up the CMOS clockdone
<notice>startproc: execve (/sbin/udevd) [ /sbin/udevd --daemon --stop-exec-queue ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 UDEVD_EVENT_TIMEOUT=1 LC_ALL=POSIX UDEVD_EXPECTED_SEQNUM=806 INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 COLUMNS=127 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/lib/klibc/bin vga=0x317 DO_CONFIRM= RUNLEVEL=S PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1024x768.cfg PREVLEVEL=N LINES=44 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/hda2 _=/sbin/startproc DAEMON=/sbin/udevd ]
<notice>killproc: kill(2068,29)
Starting udevd done
Setting up hostname 'linux'done
Setting up loopback interface lo
lo IP address: 127.0.0.1/8
Creating /var/log/boot.msg
donedone
done
Coldplug
Coldplug: cleaning /events hwup: Loading module 'ndiswrapper' for device '0'
hwup: Loading module 'lp' for device 'printer'
processing eventsdone
Starting Firewall Initialization (phase 1 of 2) Loading required kernel modules
doneRestore device permissionsdone
Activating remaining swap-devices in /etc/fstab...
doneSetting current sysctl status from /etc/sysctl.conf
net.ipv4.icmp_echo_ignore_broadcasts = 1
net.ipv4.conf.all.rp_filter = 1
done
Enabling syn flood protectiondone
Disabling IP forwardingdone
Disabling IPv6 forwardingdone
Disabling IPv6 privacydone
done
SuSEfirewall2: Warning: ip6tables does not support state matching. Extended IPv6 support disabled.
done
done
System Boot Control: The system has been set up
System Boot Control: Running /etc/init.d/boot.local
done<notice>killproc: kill(2068,3)
INIT: Entering runlevel: 5
Boot logging started on /dev/tty1(/dev/console) at Sat Mar 25 09:12:37 2006
Master Resource Control: previous runlevel: N, switching to runlevel: 5
<notice>checkproc: /sbin/udevd 4138<notice>checkproc: /sbin/udevd 4085<notice>checkproc: /sbin/udevd 3782<notice>checkproc: /sbin/udevd 2336
<notice>startproc: execve (/usr/bin/dbus-daemon) [ /usr/bin/dbus-daemon --system ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 COLUMNS=127 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/lib/klibc/bin vga=0x317 RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1024x768.cfg PREVLEVEL=N LINES=44 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/hda2 _=/sbin/startproc DAEMON=/usr/bin/dbus-daemon ]
<notice>startproc: execve (/sbin/syslog-ng) [ /sbin/syslog-ng ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 COLUMNS=127 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/lib/klibc/bin vga=0x317 RUNLEVEL=5 SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1024x768.cfg PWD=/ PREVLEVEL=N LINES=44 SHLVL=2 HOME=/ SPLASH=yes splash=silent ROOTFS_BLKDEV=/dev/hda2 _=/sbin/startproc DAEMON=/sbin/syslog-ng ]
Starting D-BUS daemondone
<notice>startproc: execve (/sbin/klogd) [ /sbin/klogd -c 1 -x -x ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 COLUMNS=127 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/lib/klibc/bin vga=0x317 RUNLEVEL=5 SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1024x768.cfg PWD=/ PREVLEVEL=N LINES=44 SHLVL=2 HOME=/ SPLASH=yes splash=silent ROOTFS_BLKDEV=/dev/hda2 _=/sbin/startproc DAEMON=/sbin/klogd ]
Starting syslog servicesdone
Initializing random number generatordone
<notice>startproc: execve (/sbin/resmgrd) [ /sbin/resmgrd ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 COLUMNS=127 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/lib/klibc/bin vga=0x317 RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1024x768.cfg PREVLEVEL=N LINES=44 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/hda2 _=/sbin/startproc DAEMON=/sbin/resmgrd ]
Starting resource managerdone
Loading keymap qwertz/de-latin1-nodeadkeys.map.gz
doneLoading compose table winkeys shiftctrl latin1.adddone
Start Unicode mode
doneLoading console font lat9w-16.psfu -m trivial G0:loadable
done<notice>startproc: execve (/opt/kde3/bin/kdm) [ /opt/kde3/bin/kdm ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 QTDIR=/usr/lib/qt3 INIT_VERSION=sysvinit-2.85 KDEROOTHOME=/root/.kdm REDIRECT=/dev/tty1 COLUMNS=127 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/lib/klibc/bin vga=0x317 RUNLEVEL=5 SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1024x768.cfg PWD=/ LANG=de_DE.UTF-8 PREVLEVEL=N LINES=44 SHLVL=2 HOME=/ XCURSOR_THEME=crystalwhite WINDOWMANAGER=/usr/X11R6/bin/kde SPLASH=yes splash=silent ROOTFS_BLKDEV=/dev/hda2 _=/sbin/startproc DAEMON=/opt/kde3/bin/kdm ]
Starting service kdmdone
Setting up ISDN card contr0 AVM FRITZ!Card PCIdone
Loading Driver contr0 1 kcapi capidone
Initializing capi for contr0 (1)done
Setting up network interfaces:
lo
lo IP address: 127.0.0.1/8
done eth0 device: Silicon Integrated Systems [SiS] SiS900 PCI Fast Ethernet (rev 91)
eth0 No configuration found for eth0
unusedWaiting for mandatory devices: wlan0 __NSC__
19 18 17 <notice>checkproc: /opt/kde3/bin/kdm 4500
16 15 14 13 12 11 10 8 7 6 5 4 3 2 1 0
wlan0 No interface found
failedSetting up service network . . . . . . . . . . . . . . . .failed
<notice>startproc: execve (/usr/sbin/mdnsd) [ /usr/sbin/mdnsd -f /etc/nss_mdns.conf -b ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 COLUMNS=127 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/lib/klibc/bin vga=0x317 RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1024x768.cfg PREVLEVEL=N LINES=44 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/hda2 _=/sbin/startproc DAEMON=/usr/sbin/mdnsd ]
Starting mdnsddone
<notice>startproc: execve (/sbin/portmap) [ /sbin/portmap ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 COLUMNS=127 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/lib/klibc/bin vga=0x317 RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1024x768.cfg PREVLEVEL=N LINES=44 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/hda2 _=/sbin/startproc DAEMON=/sbin/portmap ]
Starting RPC portmap daemondone
Importing Net File System (NFS)unused
<notice>startproc: execve (/usr/sbin/nmbd) [ /usr/sbin/nmbd -D -s /etc/samba/smb.conf ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 COLUMNS=127 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/lib/klibc/bin vga=0x317 RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1024x768.cfg PREVLEVEL=N LINES=44 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/hda2 _=/sbin/startproc DAEMON=/usr/sbin/nmbd ]
<notice>startproc: execve (/usr/sbin/acpid) [ /usr/sbin/acpid ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 COLUMNS=127 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/lib/klibc/bin vga=0x317 RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1024x768.cfg PREVLEVEL=N LINES=44 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/hda2 _=/sbin/startproc DAEMON=/usr/sbin/acpid ]
acpid: loading ACPI modules ( ac battery button ) done
Starting acpid done
Starting Samba NMB daemon done
Starting mail service (Postfix)done
Starting AntiVir: avguard-workstation<notice>startproc: execve (/usr/sbin/cron) [ /usr/sbin/cron ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 COLUMNS=127 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/lib/klibc/bin vga=0x317 RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1024x768.cfg PREVLEVEL=N LINES=44 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/hda2 _=/sbin/startproc DAEMON=/usr/sbin/cron ]
Starting CRON daemondone
<notice>startproc: execve (/usr/sbin/cupsd) [ /usr/sbin/cupsd ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 COLUMNS=127 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/lib/klibc/bin vga=0x317 RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1024x768.cfg PREVLEVEL=N LINES=44 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/hda2 _=/usr/bin/ionice DAEMON=/usr/sbin/cupsd ]
Starting cupsddone
/etc/timidity.cfg: No such file or directory
timidity: Can't read any configuration file.
Please check /etc/timidity.cfg
<notice>startproc: execve (/usr/sbin/hald) [ /usr/sbin/hald --daemon=yes --retain-privileges ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 COLUMNS=127 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/lib/klibc/bin vga=0x317 RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1024x768.cfg PREVLEVEL=N LINES=44 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/hda2 _=/sbin/startproc DAEMON=/usr/sbin/hald ]
Starting HAL daemondone
Starting AntiVir: avupdater<notice>startproc: execve (/usr/sbin/nscd) [ /usr/sbin/nscd ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 COLUMNS=127 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/lib/klibc/bin vga=0x317 RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1024x768.cfg PREVLEVEL=N LINES=44 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/hda2 _=/sbin/startproc DAEMON=/usr/sbin/nscd ]
AntiVir / Linux Version 2.1.6-16
Copyright (c) 2006 by Avira GmbH.
All rights reserved.
AntiVir Automatic Internet Updater
status: active
update: every 24 hours at 09:18
log: /var/log/avguard.log
email: dirk.fuss@freenet.de
done
Starting joystick driverdone
Checking/updating CPU microcodedone
Starting nfsboot (sm-notify) done
Starting Name Service Cache Daemondone
done
<notice>startproc: execve (/usr/sbin/sshd) [ /usr/sbin/sshd -o PidFile=/var/run/sshd.init.pid ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 COLUMNS=127 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/lib/klibc/bin vga=0x317 RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1024x768.cfg PREVLEVEL=N LINES=44 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/hda2 _=/sbin/startproc DAEMON=/usr/sbin/sshd ]
Starting SSH daemondone
<notice>startproc: execve (/usr/sbin/powersaved) [ /usr/sbin/powersaved -d -f /var/run/acpid.socket -v 3 ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 COLUMNS=127 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/lib/klibc/bin vga=0x317 RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1024x768.cfg PREVLEVEL=N LINES=44 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/hda2 _=/sbin/startproc DAEMON=/usr/sbin/powersaved ]
Starting powersaved (accessing ACPI events over acpid) done
<notice>checkproc: /opt/kde3/bin/kdm 4500
<notice>startproc: execve (/usr/sbin/smbd) [ /usr/sbin/smbd -D -s /etc/samba/smb.conf ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 TMPDIR=/var/tmp LC_ALL= INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 COLUMNS=127 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/lib/klibc/bin vga=0x317 RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1024x768.cfg LANG=de_DE.UTF-8 PREVLEVEL=N LINES=44 HOME=/ SHLVL=2 LC_CTYPE= splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/hda2 _=/sbin/startproc DAEMON=/usr/sbin/smbd ]
Starting Samba SMB daemon done
<notice>startproc: execve (/usr/sbin/xinetd) [ /usr/sbin/xinetd ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 COLUMNS=127 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/lib/klibc/bin vga=0x317 RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1024x768.cfg PREVLEVEL=N LINES=44 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/hda2 _=/sbin/startproc DAEMON=/usr/sbin/xinetd ]
Starting VMware services:
Virtual machine monitorMount SMB/ CIFS File Systems unused
Starting INET services. (xinetd)done
done
Virtual ethernet done
Bridged networking on /dev/vmnet0 done
Host-only networking on /dev/vmnet1 (background) done
Host-only networking on /dev/vmnet8 (background) done
NAT service on /dev/vmnet8 done
done
Starting Firewall Initialization (phase 2 of 2) SuSEfirewall2: Warning: ip6tables does not support state matching. Extended IPv6 support disabled.
SuSEfirewall2: Warning: no interface active
done
Master Resource Control: runlevel 5 has been reached
Failed services in runlevel 5: network
Skipped services in runlevel 5: nfs smbfs
<notice>killproc: kill(4230,3)
Er sagt no Interface found wenn ich das richtig verstanden habe.Es ist aber da und auch aktiviert.Kann mir jemand helfen?
Gruß
df
pack die ausgabe bitte in die code-tabs. macht die sache übersichtlicher. einfach vor der ausgabe [ CODE ] und danach [ /CODE ] aber du musst die freizeichen weglassen in den klammern.
Powered by vBulletin® Version 4.2.5 Copyright ©2024 Adduco Digital e.K. und vBulletin Solutions, Inc. Alle Rechte vorbehalten.