PDA

Archiv verlassen und diese Seite im Standarddesign anzeigen : Suche SSH2-Server Programm für Suse 10!



Franz10
19.02.06, 11:34
Hey leute,

kennt jemand von euch ein SSH2-Server für suse 10? Ich brauch einen SSH2 Server damit ich mit meinem Handy auf dem Linux anmelden kann, das blöde ist nur das mein Handy ausschließlich ssh2 macht und nicht 1.

Standartmäßig ist ssh1 ja bei Suse dabei. Bei google & Co hab ich nur ssh2 server für windows gefunden warum auch immer....

also wäre auch dankbar evtl. gleich mit ner hilfe für die configuration o.ä.

mfg franz10

drcux
19.02.06, 11:37
Standartmäßig ist ssh1 ja bei Suse dabei.

Wie kommst du denn darauf? Standardmäßig ist ssh2 aktiviert...

quinte17
19.02.06, 11:37
also suse 10 hat beides standardmäßig dabei...
einfach mal in die
/etc/ssh/sshd_conf
schauen und dann
zeile mit Protocol suchen und auf 2 stellen:
Protocol 2

greetz

Franz10
19.02.06, 13:25
also suse 10 hat beides standardmäßig dabei...
einfach mal in die
/etc/ssh/sshd_conf
schauen und dann
zeile mit Protocol suchen und auf 2 stellen:
Protocol 2

greetz


Hallo Quinte17,

ok das hab ich nun gemacht, doch über mein Handy klappt das immer noch nicht, wenn ich mich aber von meinem handy über ssh auf dem server: m-net.arbornet.org anmelde geht das!

Wenn ich mich über putty von meinem Windows Rechner an dem linux anmelde geht das auch! Nur halt über mein Handy nicht! Wobei mein handy halt nur ssh2 mach und m-net.arbornet.org geht ja auch mit meinem Handy nur mein linux halt nicht :-!

Kann ich irgendwie sehen ob mein ssh server nun auf protocol 2 läuft?!

danke !!

MFG Silas

drcux
19.02.06, 13:32
was sagt denn /var/log/messages wenn du es versuchst?

Franz10
19.02.06, 13:46
in der /var/logs/messages steht nur

03 linuxpower sshd[23707]: fatal: Timeout before authentication for 216.220.221.237


aber hab grad im webmin geschaut und dort ist nun auch der hacken bei v2 also läuft denk ich mal schon ssh2

hmmm leute ich bin echt ratlos

hier mal meine sshd_config:

# $OpenBSD: sshd_config,v 1.70 2004/12/23 23:11:00 djm Exp $

# This is the sshd server system-wide configuration file. See
# sshd_config(5) for more information.

# This sshd was compiled with PATH=/usr/bin:/bin:/usr/sbin:/sbin

# The strategy used for options in the default sshd_config shipped with
# OpenSSH is to specify options with their default value where
# possible, but leave them commented. Uncommented options change a
# default value.

#Port 22
#Protocol 2,1
Protocol 1,2
#AddressFamily any
#ListenAddress 0.0.0.0
#ListenAddress ::

# HostKey for protocol version 1
#HostKey /etc/ssh/ssh_host_key
# HostKeys for protocol version 2
#HostKey /etc/ssh/ssh_host_rsa_key
#HostKey /etc/ssh/ssh_host_dsa_key

# Lifetime and size of ephemeral version 1 server key
#KeyRegenerationInterval 1h
#ServerKeyBits 768

# Logging
#obsoletes QuietMode and FascistLogging
#SyslogFacility AUTH
#LogLevel INFO

# Authentication:

#LoginGraceTime 2m
#PermitRootLogin yes
#StrictModes yes
#MaxAuthTries 6

#RSAAuthentication yes
#PubkeyAuthentication yes
#AuthorizedKeysFile .ssh/authorized_keys

# For this to work you will also need host keys in /etc/ssh/ssh_known_hosts
#RhostsRSAAuthentication no
# similar for protocol version 2
#HostbasedAuthentication no
# Change to yes if you don't trust ~/.ssh/known_hosts for
# RhostsRSAAuthentication and HostbasedAuthentication
#IgnoreUserKnownHosts no
# Don't read the user's ~/.rhosts and ~/.shosts files
#IgnoreRhosts yes

# To disable tunneled clear text passwords, change to no here!
PasswordAuthentication no
#PermitEmptyPasswords no

# Change to no to disable s/key passwords
#ChallengeResponseAuthentication yes

# Kerberos options
#KerberosAuthentication no
#KerberosOrLocalPasswd yes
#KerberosTicketCleanup yes
#KerberosGetAFSToken no

# GSSAPI options
#GSSAPIAuthentication no
#GSSAPICleanupCredentials yes

# Set this to 'yes' to enable support for the deprecated 'gssapi' authentication
# mechanism to OpenSSH 3.8p1. The newer 'gssapi-with-mic' mechanism is included
# in this release. The use of 'gssapi' is deprecated due to the presence of
# potential man-in-the-middle attacks, which 'gssapi-with-mic' is not susceptible to.
#GSSAPIEnableMITMAttack no


# Set this to 'yes' to enable PAM authentication, account processing,
# and session processing. If this is enabled, PAM authentication will
# be allowed through the ChallengeResponseAuthentication mechanism.
# Depending on your PAM configuration, this may bypass the setting of
# PasswordAuthentication, PermitEmptyPasswords, and
# "PermitRootLogin without-password". If you just want the PAM account and
# session checks to run without PAM authentication, then enable this but set
# ChallengeResponseAuthentication=no
UsePAM yes

#AllowTcpForwarding yes
#GatewayPorts no
X11Forwarding yes
#X11DisplayOffset 10
#X11UseLocalhost yes
#PrintMotd yes
#PrintLastLog yes
#TCPKeepAlive yes
#UseLogin no
#UsePrivilegeSeparation yes
#PermitUserEnvironment no
#Compression yes
#ClientAliveInterval 0
#ClientAliveCountMax 3
#UseDNS yes
#PidFile /var/run/sshd.pid
#MaxStartups 10

# no default banner path
#Banner /some/path

# override default of no subsystems
Subsystem sftp /usr/lib/ssh/sftp-server

# This enables accepting locale enviroment variables LC_* LANG, see sshd_config(5).
AcceptEnv LANG LC_CTYPE LC_NUMERIC LC_TIME LC_COLLATE LC_MONETARY LC_MESSAGES
AcceptEnv LC_PAPER LC_NAME LC_ADDRESS LC_TELEPHONE LC_MEASUREMENT
AcceptEnv LC_IDENTIFICATION LC_ALL
GatewayPorts yes
AllowTcpForwarding yes
KeepAlive yes



mfg

Roger Wilco
19.02.06, 14:28
Ersetze
Protocol 1,2
durch
Protocol 2

Franz10
19.02.06, 14:49
Ersetze
Protocol 1,2
durch
Protocol 2


hab ich gemacht, geht trotzdem nicht :confused:

Franz10
19.02.06, 15:07
JUHUUUU,

jetzt gehts hab bisschen in der config rum "gespielt" und nun funzt..

hab jedeglich
PasswordAuthentication no //aus dokumentiert,

hier meine config :


# $OpenBSD: sshd_config,v 1.70 2004/12/23 23:11:00 djm Exp $

# This is the sshd server system-wide configuration file. See
# sshd_config(5) for more information.

# This sshd was compiled with PATH=/usr/bin:/bin:/usr/sbin:/sbin

# The strategy used for options in the default sshd_config shipped with
# OpenSSH is to specify options with their default value where
# possible, but leave them commented. Uncommented options change a
# default value.

#Port 22
#Protocol 2,1
Protocol 2,1
#AddressFamily any
#ListenAddress 0.0.0.0
#ListenAddress ::

# HostKey for protocol version 1
#HostKey /etc/ssh/ssh_host_key
# HostKeys for protocol version 2
#HostKey /etc/ssh/ssh_host_rsa_key
#HostKey /etc/ssh/ssh_host_dsa_key

# Lifetime and size of ephemeral version 1 server key
#KeyRegenerationInterval 1h
#ServerKeyBits 768

# Logging
#obsoletes QuietMode and FascistLogging
#SyslogFacility AUTH
#LogLevel INFO

# Authentication:

#LoginGraceTime 2m
#PermitRootLogin yes
#StrictModes yes
#MaxAuthTries 6

#RSAAuthentication yes
#PubkeyAuthentication yes
#AuthorizedKeysFile .ssh/authorized_keys

# For this to work you will also need host keys in /etc/ssh/ssh_known_hosts
#RhostsRSAAuthentication no
# similar for protocol version 2
#HostbasedAuthentication no
# Change to yes if you don't trust ~/.ssh/known_hosts for
# RhostsRSAAuthentication and HostbasedAuthentication
#IgnoreUserKnownHosts no
# Don't read the user's ~/.rhosts and ~/.shosts files
#IgnoreRhosts yes

# To disable tunneled clear text passwords, change to no here!
#PasswordAuthentication no
#PermitEmptyPasswords no

# Change to no to disable s/key passwords
#ChallengeResponseAuthentication yes

# Kerberos options
#KerberosAuthentication no
#KerberosOrLocalPasswd yes
#KerberosTicketCleanup yes
#KerberosGetAFSToken no

# GSSAPI options
#GSSAPIAuthentication no
#GSSAPICleanupCredentials yes

# Set this to 'yes' to enable support for the deprecated 'gssapi' authentication
# mechanism to OpenSSH 3.8p1. The newer 'gssapi-with-mic' mechanism is included
# in this release. The use of 'gssapi' is deprecated due to the presence of
# potential man-in-the-middle attacks, which 'gssapi-with-mic' is not susceptible to.
#GSSAPIEnableMITMAttack no


# Set this to 'yes' to enable PAM authentication, account processing,
# and session processing. If this is enabled, PAM authentication will
# be allowed through the ChallengeResponseAuthentication mechanism.
# Depending on your PAM configuration, this may bypass the setting of
# PasswordAuthentication, PermitEmptyPasswords, and
# "PermitRootLogin without-password". If you just want the PAM account and
# session checks to run without PAM authentication, then enable this but set
# ChallengeResponseAuthentication=no
UsePAM yes

#AllowTcpForwarding yes
#GatewayPorts no
X11Forwarding yes
#X11DisplayOffset 10
#X11UseLocalhost yes
#PrintMotd yes
#PrintLastLog yes
#TCPKeepAlive yes
#UseLogin no
#UsePrivilegeSeparation yes
#PermitUserEnvironment no
#Compression yes
#ClientAliveInterval 0
#ClientAliveCountMax 3
#UseDNS yes
#PidFile /var/run/sshd.pid
#MaxStartups 10

# no default banner path
#Banner /some/path

# override default of no subsystems
Subsystem sftp /usr/lib/ssh/sftp-server

# This enables accepting locale enviroment variables LC_* LANG, see sshd_config(5).
AcceptEnv LANG LC_CTYPE LC_NUMERIC LC_TIME LC_COLLATE LC_MONETARY LC_MESSAGES
AcceptEnv LC_PAPER LC_NAME LC_ADDRESS LC_TELEPHONE LC_MEASUREMENT
AcceptEnv LC_IDENTIFICATION LC_ALL
GatewayPorts yes
AllowTcpForwarding yes
KeepAlive yes

fehl-x
19.02.06, 15:10
hat es vielleicht daran gelegen, dass du den sshd nach änderungen an der config nicht neugestartet hast?

felix

Franz10
19.02.06, 15:12
hat es vielleicht daran gelegen, dass du den sshd nach änderungen an der config nicht neugestartet hast?

felix


Ne glaub nicht, hab ihn nach jeder Veränderung neu gestartet!

DANKE MFG