PDA

Archiv verlassen und diese Seite im Standarddesign anzeigen : Audigy 2 Platinum in Debian korrekt einrichten? help needed



Homer33
26.01.06, 10:50
Hi Freaks!

ich habe eine Audigy 2 Platinum und Debian Sarge mit kernel 2.6.12-1-k7 und eine Hauppauge TV Karte. Nachfolgend habe ich euch einige Ausgaben von Befehlen angefügt, vllt könnt ihr mir anhand dieser weiterhelfen.
Ich habe alsa-utils,alsa-base etc. installiert und alsaconf ausgeführt (siehe unten)


cat /proc/asound/cards
0 [SB0240P ]: Audigy2 - Audigy 2 Platinum [SB0240P]
Audigy 2 Platinum [SB0240P] (rev.4, serial:0x10021102) at 0xc400, irq 185
1 [Bt878 ]: Bt87x - Brooktree Bt878
Brooktree Bt878 at 0xd8001000, irq 217



lspci | grep audio
0000:01:09.0 Multimedia audio controller: Creative Labs SB Audigy (rev 04)



modprobe -l | grep snd | grep pci
/lib/modules/2.6.12-1-k7/kernel/sound/pci/ymfpci/snd-ymfpci.ko
/lib/modules/2.6.12-1-k7/kernel/sound/pci/vx222/snd-vx222.ko
/lib/modules/2.6.12-1-k7/kernel/sound/pci/trident/snd-trident.ko
/lib/modules/2.6.12-1-k7/kernel/sound/pci/trident/snd-trident-synth.ko
/lib/modules/2.6.12-1-k7/kernel/sound/pci/snd-via82xx.ko
/lib/modules/2.6.12-1-k7/kernel/sound/pci/snd-sonicvibes.ko
/lib/modules/2.6.12-1-k7/kernel/sound/pci/snd-rme96.ko
/lib/modules/2.6.12-1-k7/kernel/sound/pci/snd-rme32.ko
/lib/modules/2.6.12-1-k7/kernel/sound/pci/snd-maestro3.ko
/lib/modules/2.6.12-1-k7/kernel/sound/pci/snd-intel8x0m.ko
/lib/modules/2.6.12-1-k7/kernel/sound/pci/snd-intel8x0.ko
/lib/modules/2.6.12-1-k7/kernel/sound/pci/snd-fm801.ko
/lib/modules/2.6.12-1-k7/kernel/sound/pci/snd-es1968.ko
/lib/modules/2.6.12-1-k7/kernel/sound/pci/snd-es1938.ko
/lib/modules/2.6.12-1-k7/kernel/sound/pci/snd-ens1371.ko
/lib/modules/2.6.12-1-k7/kernel/sound/pci/snd-ens1370.ko
/lib/modules/2.6.12-1-k7/kernel/sound/pci/snd-cs4281.ko
/lib/modules/2.6.12-1-k7/kernel/sound/pci/snd-cmipci.ko
/lib/modules/2.6.12-1-k7/kernel/sound/pci/snd-bt87x.ko
/lib/modules/2.6.12-1-k7/kernel/sound/pci/snd-azt3328.ko
/lib/modules/2.6.12-1-k7/kernel/sound/pci/snd-atiixp.ko
/lib/modules/2.6.12-1-k7/kernel/sound/pci/snd-atiixp-modem.ko
/lib/modules/2.6.12-1-k7/kernel/sound/pci/snd-via82xx-modem.ko
/lib/modules/2.6.12-1-k7/kernel/sound/pci/rme9652/snd-hdsp.ko
/lib/modules/2.6.12-1-k7/kernel/sound/pci/rme9652/snd-rme9652.ko
/lib/modules/2.6.12-1-k7/kernel/sound/pci/nm256/snd-nm256.ko
/lib/modules/2.6.12-1-k7/kernel/sound/pci/mixart/snd-mixart.ko
/lib/modules/2.6.12-1-k7/kernel/sound/pci/snd-als4000.ko
/lib/modules/2.6.12-1-k7/kernel/sound/pci/ice1712/snd-ice1724.ko
/lib/modules/2.6.12-1-k7/kernel/sound/pci/ice1712/snd-ice1712.ko
/lib/modules/2.6.12-1-k7/kernel/sound/pci/ice1712/snd-ice17xx-ak4xxx.ko
/lib/modules/2.6.12-1-k7/kernel/sound/pci/hda/snd-hda-intel.ko
/lib/modules/2.6.12-1-k7/kernel/sound/pci/hda/snd-hda-codec.ko
/lib/modules/2.6.12-1-k7/kernel/sound/pci/emu10k1/snd-emu10k1x.ko
/lib/modules/2.6.12-1-k7/kernel/sound/pci/emu10k1/snd-emu10k1.ko
/lib/modules/2.6.12-1-k7/kernel/sound/pci/emu10k1/snd-emu10k1-synth.ko
/lib/modules/2.6.12-1-k7/kernel/sound/pci/cs46xx/snd-cs46xx.ko
/lib/modules/2.6.12-1-k7/kernel/sound/pci/ca0106/snd-ca0106.ko
/lib/modules/2.6.12-1-k7/kernel/sound/pci/au88x0/snd-au8830.ko
/lib/modules/2.6.12-1-k7/kernel/sound/pci/au88x0/snd-au8820.ko
/lib/modules/2.6.12-1-k7/kernel/sound/pci/au88x0/snd-au8810.ko
/lib/modules/2.6.12-1-k7/kernel/sound/pci/ali5451/snd-ali5451.ko
/lib/modules/2.6.12-1-k7/kernel/sound/pci/ac97/snd-ak4531-codec.ko
/lib/modules/2.6.12-1-k7/kernel/sound/pci/ac97/snd-ac97-codec.ko
/lib/modules/2.6.12-1-k7/kernel/sound/pci/korg1212/snd-korg1212.ko

Alsamixer erkennt folgende Karte:


Card: Audigy 2 Platinum [SB0240P]
Chip: SigmaTel STAC9721,23

Mein Problem ist ich höre weder bei tvtime noch unter Gnome einen Ton (zb. in xmms obwohl dort unter Einstelungen alsa eingestellt ist)

Brauche dringend eure Hilfe!

thx

Corre

Homer33
26.01.06, 20:42
alsamixer war der Fehler