HaukeW
25.01.06, 20:58
Hallo!
Mir ist eben - ohne erkennbaren Grund - das System stehengeblieben, dabei kam aus den Boxen ein lautes Geräusch. Nach dem Reboot geht der Sound nicht mehr, ohne, dass ich etwas an der Config verändert hätte.
Wenn ich lspci -v tippe, kommt
hauke@hauke:~$ lspci -v
0000:00:00.0 Host bridge: nVidia Corporation nForce2 AGP (different version?) (rev c1)
Subsystem: Asustek Computer, Inc.: Unknown device 80ac
Flags: bus master, 66MHz, fast devsel, latency 0
Memory at c0000000 (32-bit, prefetchable) [size=256M]
Capabilities: <available only to root>
0000:00:00.1 RAM memory: nVidia Corporation nForce2 Memory Controller 1 (rev c1)
Subsystem: Asustek Computer, Inc.: Unknown device 80ac
Flags: 66MHz, fast devsel
0000:00:00.2 RAM memory: nVidia Corporation nForce2 Memory Controller 4 (rev c1)
Subsystem: Asustek Computer, Inc.: Unknown device 80ac
Flags: 66MHz, fast devsel
0000:00:00.3 RAM memory: nVidia Corporation nForce2 Memory Controller 3 (rev c1)
Subsystem: Asustek Computer, Inc.: Unknown device 80ac
Flags: 66MHz, fast devsel
0000:00:00.4 RAM memory: nVidia Corporation nForce2 Memory Controller 2 (rev c1)
Subsystem: Asustek Computer, Inc.: Unknown device 80ac
Flags: 66MHz, fast devsel
0000:00:00.5 RAM memory: nVidia Corporation nForce2 Memory Controller 5 (rev c1)
Subsystem: Asustek Computer, Inc.: Unknown device 80ac
Flags: 66MHz, fast devsel
0000:00:01.0 ISA bridge: nVidia Corporation nForce2 ISA Bridge (rev a4)
Subsystem: Asustek Computer, Inc. A7N8X Mainboard
Flags: bus master, 66MHz, fast devsel, latency 0
Capabilities: <available only to root>
0000:00:01.1 SMBus: nVidia Corporation nForce2 SMBus (MCP) (rev a2)
Subsystem: Asustek Computer, Inc.: Unknown device 0c11
Flags: 66MHz, fast devsel, IRQ 10
I/O ports at c800 [size=32]
Capabilities: <available only to root>
0000:00:02.0 USB Controller: nVidia Corporation nForce2 USB Controller (rev a4) (prog-if 10 [OHCI])
Subsystem: Asustek Computer, Inc. A7N8X Mainboard
Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 22
Memory at dd001000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <available only to root>
0000:00:02.1 USB Controller: nVidia Corporation nForce2 USB Controller (rev a4) (prog-if 10 [OHCI])
Subsystem: Asustek Computer, Inc. A7N8X Mainboard
Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 21
Memory at dd002000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <available only to root>
0000:00:02.2 USB Controller: nVidia Corporation nForce2 USB Controller (rev a4) (prog-if 20 [EHCI])
Subsystem: Asustek Computer, Inc. A7N8X Mainboard
Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 20
Memory at dd003000 (32-bit, non-prefetchable) [size=256]
Capabilities: <available only to root>
0000:00:04.0 Ethernet controller: nVidia Corporation nForce2 Ethernet Controller (rev a1)
Subsystem: Asustek Computer, Inc. A7N8X Mainboard onboard nForce2 Ethernet
Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 22
Memory at dd004000 (32-bit, non-prefetchable) [size=4K]
I/O ports at cc00 [size=8]
Capabilities: <available only to root>
0000:00:08.0 PCI bridge: nVidia Corporation nForce2 External PCI Bridge (rev a3) (prog-if 00 [Normal decode])
Flags: bus master, 66MHz, fast devsel, latency 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
I/O behind bridge: 00009000-0000afff
Memory behind bridge: db000000-dcffffff
0000:00:09.0 IDE interface: nVidia Corporation nForce2 IDE (rev a2) (prog-if 8a [Master SecP PriP])
Subsystem: Asustek Computer, Inc.: Unknown device 0c11
Flags: bus master, 66MHz, fast devsel, latency 0
I/O ports at f000 [size=16]
Capabilities: <available only to root>
0000:00:1e.0 PCI bridge: nVidia Corporation nForce2 AGP (rev c1) (prog-if 00 [Normal decode])
Flags: bus master, 66MHz, medium devsel, latency 32
Bus: primary=00, secondary=03, subordinate=03, sec-latency=32
Memory behind bridge: d9000000-daffffff
Prefetchable memory behind bridge: d0000000-d7ffffff
0000:01:04.0 Ethernet controller: Marvell Technology Group Ltd. Yukon Gigabit Ethernet 10/100/1000Base-T Adapter (rev 13)
Subsystem: Asustek Computer, Inc.: Unknown device 811a
Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 17
Memory at dc000000 (32-bit, non-prefetchable) [size=16K]
I/O ports at 9000 [size=256]
Capabilities: <available only to root>
0000:01:0a.0 Multimedia audio controller: Creative Labs SB Audigy (rev 03)
Subsystem: Creative Labs SB0090 Audigy Player
Flags: medium devsel, IRQ 255
I/O ports at <unassigned> [disabled]
Capabilities: <available only to root>
0000:01:0a.2 FireWire (IEEE 1394): Creative Labs SB Audigy FireWire Port (prog-if 10 [OHCI])
Subsystem: Creative Labs SB Audigy FireWire Port
Flags: bus master, medium devsel, latency 64, IRQ 17
Memory at db000000 (32-bit, non-prefetchable) [size=2K]
Memory at db004000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <available only to root>
0000:01:0b.0 RAID bus controller: Silicon Image, Inc. (formerly CMD Technology Inc) SiI 3112 [SATALink/SATARaid] Serial ATA Controller (rev 02)
Subsystem: Silicon Image, Inc. (formerly CMD Technology Inc) Asus A7N8X
Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 18
I/O ports at 9400 [size=8]
I/O ports at 9800 [size=4]
I/O ports at 9c00 [size=8]
I/O ports at a000 [size=4]
I/O ports at a400 [size=16]
Memory at dc004000 (32-bit, non-prefetchable) [size=512]
Capabilities: <available only to root>
0000:03:00.0 VGA compatible controller: nVidia Corporation NV35 [GeForce FX 5900] (rev a1) (prog-if 00 [VGA])
Subsystem: Asustek Computer, Inc.: Unknown device 8123
Flags: bus master, 66MHz, medium devsel, latency 248, IRQ 19
Memory at d9000000 (32-bit, non-prefetchable) [size=16M]
Memory at d0000000 (32-bit, prefetchable) [size=128M]
Capabilities: <available only to root>
Scheinbar ist die Soundkarte da, aber warum erkennt Ubuntu sie nicht? Und was muss ich eintippen, damit sie wieder geht?
Gruß, Hauke
Mir ist eben - ohne erkennbaren Grund - das System stehengeblieben, dabei kam aus den Boxen ein lautes Geräusch. Nach dem Reboot geht der Sound nicht mehr, ohne, dass ich etwas an der Config verändert hätte.
Wenn ich lspci -v tippe, kommt
hauke@hauke:~$ lspci -v
0000:00:00.0 Host bridge: nVidia Corporation nForce2 AGP (different version?) (rev c1)
Subsystem: Asustek Computer, Inc.: Unknown device 80ac
Flags: bus master, 66MHz, fast devsel, latency 0
Memory at c0000000 (32-bit, prefetchable) [size=256M]
Capabilities: <available only to root>
0000:00:00.1 RAM memory: nVidia Corporation nForce2 Memory Controller 1 (rev c1)
Subsystem: Asustek Computer, Inc.: Unknown device 80ac
Flags: 66MHz, fast devsel
0000:00:00.2 RAM memory: nVidia Corporation nForce2 Memory Controller 4 (rev c1)
Subsystem: Asustek Computer, Inc.: Unknown device 80ac
Flags: 66MHz, fast devsel
0000:00:00.3 RAM memory: nVidia Corporation nForce2 Memory Controller 3 (rev c1)
Subsystem: Asustek Computer, Inc.: Unknown device 80ac
Flags: 66MHz, fast devsel
0000:00:00.4 RAM memory: nVidia Corporation nForce2 Memory Controller 2 (rev c1)
Subsystem: Asustek Computer, Inc.: Unknown device 80ac
Flags: 66MHz, fast devsel
0000:00:00.5 RAM memory: nVidia Corporation nForce2 Memory Controller 5 (rev c1)
Subsystem: Asustek Computer, Inc.: Unknown device 80ac
Flags: 66MHz, fast devsel
0000:00:01.0 ISA bridge: nVidia Corporation nForce2 ISA Bridge (rev a4)
Subsystem: Asustek Computer, Inc. A7N8X Mainboard
Flags: bus master, 66MHz, fast devsel, latency 0
Capabilities: <available only to root>
0000:00:01.1 SMBus: nVidia Corporation nForce2 SMBus (MCP) (rev a2)
Subsystem: Asustek Computer, Inc.: Unknown device 0c11
Flags: 66MHz, fast devsel, IRQ 10
I/O ports at c800 [size=32]
Capabilities: <available only to root>
0000:00:02.0 USB Controller: nVidia Corporation nForce2 USB Controller (rev a4) (prog-if 10 [OHCI])
Subsystem: Asustek Computer, Inc. A7N8X Mainboard
Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 22
Memory at dd001000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <available only to root>
0000:00:02.1 USB Controller: nVidia Corporation nForce2 USB Controller (rev a4) (prog-if 10 [OHCI])
Subsystem: Asustek Computer, Inc. A7N8X Mainboard
Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 21
Memory at dd002000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <available only to root>
0000:00:02.2 USB Controller: nVidia Corporation nForce2 USB Controller (rev a4) (prog-if 20 [EHCI])
Subsystem: Asustek Computer, Inc. A7N8X Mainboard
Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 20
Memory at dd003000 (32-bit, non-prefetchable) [size=256]
Capabilities: <available only to root>
0000:00:04.0 Ethernet controller: nVidia Corporation nForce2 Ethernet Controller (rev a1)
Subsystem: Asustek Computer, Inc. A7N8X Mainboard onboard nForce2 Ethernet
Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 22
Memory at dd004000 (32-bit, non-prefetchable) [size=4K]
I/O ports at cc00 [size=8]
Capabilities: <available only to root>
0000:00:08.0 PCI bridge: nVidia Corporation nForce2 External PCI Bridge (rev a3) (prog-if 00 [Normal decode])
Flags: bus master, 66MHz, fast devsel, latency 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
I/O behind bridge: 00009000-0000afff
Memory behind bridge: db000000-dcffffff
0000:00:09.0 IDE interface: nVidia Corporation nForce2 IDE (rev a2) (prog-if 8a [Master SecP PriP])
Subsystem: Asustek Computer, Inc.: Unknown device 0c11
Flags: bus master, 66MHz, fast devsel, latency 0
I/O ports at f000 [size=16]
Capabilities: <available only to root>
0000:00:1e.0 PCI bridge: nVidia Corporation nForce2 AGP (rev c1) (prog-if 00 [Normal decode])
Flags: bus master, 66MHz, medium devsel, latency 32
Bus: primary=00, secondary=03, subordinate=03, sec-latency=32
Memory behind bridge: d9000000-daffffff
Prefetchable memory behind bridge: d0000000-d7ffffff
0000:01:04.0 Ethernet controller: Marvell Technology Group Ltd. Yukon Gigabit Ethernet 10/100/1000Base-T Adapter (rev 13)
Subsystem: Asustek Computer, Inc.: Unknown device 811a
Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 17
Memory at dc000000 (32-bit, non-prefetchable) [size=16K]
I/O ports at 9000 [size=256]
Capabilities: <available only to root>
0000:01:0a.0 Multimedia audio controller: Creative Labs SB Audigy (rev 03)
Subsystem: Creative Labs SB0090 Audigy Player
Flags: medium devsel, IRQ 255
I/O ports at <unassigned> [disabled]
Capabilities: <available only to root>
0000:01:0a.2 FireWire (IEEE 1394): Creative Labs SB Audigy FireWire Port (prog-if 10 [OHCI])
Subsystem: Creative Labs SB Audigy FireWire Port
Flags: bus master, medium devsel, latency 64, IRQ 17
Memory at db000000 (32-bit, non-prefetchable) [size=2K]
Memory at db004000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <available only to root>
0000:01:0b.0 RAID bus controller: Silicon Image, Inc. (formerly CMD Technology Inc) SiI 3112 [SATALink/SATARaid] Serial ATA Controller (rev 02)
Subsystem: Silicon Image, Inc. (formerly CMD Technology Inc) Asus A7N8X
Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 18
I/O ports at 9400 [size=8]
I/O ports at 9800 [size=4]
I/O ports at 9c00 [size=8]
I/O ports at a000 [size=4]
I/O ports at a400 [size=16]
Memory at dc004000 (32-bit, non-prefetchable) [size=512]
Capabilities: <available only to root>
0000:03:00.0 VGA compatible controller: nVidia Corporation NV35 [GeForce FX 5900] (rev a1) (prog-if 00 [VGA])
Subsystem: Asustek Computer, Inc.: Unknown device 8123
Flags: bus master, 66MHz, medium devsel, latency 248, IRQ 19
Memory at d9000000 (32-bit, non-prefetchable) [size=16M]
Memory at d0000000 (32-bit, prefetchable) [size=128M]
Capabilities: <available only to root>
Scheinbar ist die Soundkarte da, aber warum erkennt Ubuntu sie nicht? Und was muss ich eintippen, damit sie wieder geht?
Gruß, Hauke